Hydrogen storage in ni nanoparticle-dispersed multiwalled carbon nanotubes

Density functional theory study of the electronic and optical properties of pentagraphyne nanotubes

Pentagraphyne (PG-yne), a recently predicted two-dimensional (2D) carbon allotrope with appealing properties, has opened up possibilities for a wide range of applications. In this study, we investigate the structural, electronic, optical, and electrical transport properties of a novel one-dimensional (1D) system called pentagraphyne nanotubes (PG-yneNTs), formed by rolling a PG-yne sheet, using density functional theory (DFT) calculations. We design PG-yneNTs with diameters ranging from 6.94 Å to 13.62 Å and employ state-of-the-art theoretical calculations to confirm their energetic, dynamic, and thermodynamic stability. Our electronic band structure calculations reveal that all these nanotubes are wide indirect band gap semiconductors. Remarkably, PG-yneNTs exhibit superior optical properties, including high absorption coefficients and absorption spectra covering the visible regime of the electromagnetic spectrum, making them potential candidates for visible-light-driven photocatalysis and solar cells. Interestingly, both the electronic and optical band gaps increase with the diameter of the nanotubes. Additionally, the observation of negative differential resistance (NDR) phenomena in (4, 0) PG-yneNT suggests their potential applications in NDR devices such as fast switches, frequency multipliers, and memory devices.

Emerging Technology for a Green, Sustainable Energy-Promising Materials for Hydrogen Storage, from Nanotubes to Graphene-A Review

The energetic and climate crises should pose a challenge for scientists in finding solutions in the field of renewable, green energy sources. Throughout more than two decades, the search for new opportunities in the energy industry made it possible to observe the potential use of hydrogen as an energy source. One of the greatest challenges faced by scientists for the sake of its use as an energy source is designing safe, usable, reliable, and effective forms of hydrogen storage. Moreover, the manner in which hydrogen is to be stored is closely dependent on the potential use of this source of green energy. In stationary use, the aim is to achieve high volumetric density of the container. However, from the point of view of mobile applications, an extremely important aspect is the storage of hydrogen, using lightweight tanks of relatively high density. That is why, a focus of scientists has been put on the use of carbon-based materials and graphene as a perspective solution in the field of H₂ storage. This review focuses on the comparison of different methods for hydrogen storage, mainly based on the carbon-based materials and focuses on efficiently using graphene and its different forms to serve a purpose in the future H₂-based economy.

H2S adsorption on pristine and metal-decorated (8, 0) SWCNT: a first principle study

Adsorption of hydrogen sulfide (H₂S) on the surface of catalytic systems containing (8, 0) single-walled carbon nanotube decorated with Ni and Pd transition metals was investigated using plane-wave density functional theory. SWCNT was modified by adding Ni and Pd atoms to both inside and outside the nanotube and replacing carbon atoms with these metals. All structures were relaxed, and their structural and electronic properties were investigated before and after H₂S adsorption and compared with pristine (8, 0) SWCNT properties. Obtained results showed that decorating CNTs with metals increases CNT efficiency for H₂S adsorption. The most negative adsorption energies were observed when H₂S was adsorbed on the surfaces of metal-decorated nanotube. Electronic properties like band structures and density of states indicated that systems containing Ni on SWCNT are more effective at adsorbing and sensing H₂S molecules. Hydrogen sulfide adsorption also changed the magnetization of Ni-decorated structures. Moreover, adsorption of H₂S from H side to Ni-decorated SWCNT leads to dissociation of H₂S to HS and S atom. Obtained results showed that metal-decorated nanotubes are potentially good candidates for separating H₂S from industrial waste gas streams and for its use in H₂S sensors.

Reduced graphene oxide decorated with magnetite nanoparticles enhance biomethane enrichment

The addition of magnetite nanoparticles (MNPs), reduced graphene oxide (rGO), and reduced graphene oxide decorated with magnetite nanoparticles (rGO-MNPs) was evaluated during biomethane enrichment process. rGO-MNPs presented the highest beneficial impact on the hydrogenotrophic assays with an improvement of 47 % in CH₄ production. The improvement was linked to the increase of the electron shuttling capacity (ESC) by rGO-MNPs addition, which boosted the hydrogenotrophic activity of microorganisms, to the rGO and rGO-MNPs, which served as reservoirs of hydrogen, improving H⁠₂ transport from the gas to the liquid phase, and to the iron ions released, which acted as a dietary supply for microorganisms. Raman and XRD confirmed a greater disorder and lower crystallinity of rGO-MNPs after the hydrogenotrophic assays, with a lower effect at a nanoparticle concentration of 50 mg/L. Moreover, FTIR analysis indicated that rGO-MNPs were oxidized during the hydrogenotrophic tests. This study highlights the advantages of adding rGO-MNPs as a magnetic nanocomposite. Furthermore, rGO-MNPs can be easily recovered, minimizing their release to the environment.

Three-step-in-one synthesis of supercapacitor MWCNT superparamagnetic magnetite composite material under flow

Composites of multi-walled carbon nanotubes (MWCNTs) and superparamagnetic magnetite nanoparticles, Fe3O4@MWCNT, were synthesized in DMF in a vortex fluidic device (VFD). This involved in situ generation of the iron oxide nanoparticles by laser ablation of bulk iron metal at 1064 nm using a pulsed laser, over the dynamic thin film in the microfluidic platform. The overall processing is a three-step in one operation: (i) slicing MWCNTs, (ii) generating the superparamagnetic nanoparticles and (iii) decorating them on the surface of the MWCNTs. The Fe3O4@MWCNT composites were characterized by transmission electron microscopy, scanning transmission electron microscope, TG analysis, X-ray diffraction and X-ray photoelectron spectroscopy. They were used as an active electrode for supercapacitor measurements, establishing high gravimetric and areal capacitances of 834 F g-1 and 1317.7 mF cm-2 at a scan rate of 10 mV s-1, respectively, which are higher values than those reported using similar materials. In addition, the designer material has a significantly higher specific energy of 115.84 W h kg-1 at a specific power of 2085 W kg-1, thereby showing promise for the material in next-generation energy storage devices.

Density functional calculations of nickel, palladium and cadmium adsorption onto (10,0) single-walled carbon nanotube

Adsorption of three heavy metals (Ni, Pd, Cd) onto (10,0) single-walled carbon nanotube (SWCNT) was investigated using density functional theory (DFT). Metals were adsorbed to both inside and outside of SWCNT and their structures and electronic properties [e.g., band structures and density of states (DOS)] were calculated and compared. The effects of substituting one carbon atom of the nanotube with these metals were also investigated. Formation energy results showed that adsorption inside and outside the nanotube is energetically favored. Significant changes were observed in the electronic properties of SWCNT after Ni and Pd adsorptions, and the nanotube changes from being a semi-conductor to a metallic conductor. However, the conductivity did not change markedly after Cd adsorption, indicating its physical adsorption to the nanotube. Spin polarized calculations showed that nickel adsorption inside and outside SWCNT induces magnetization of the system. Different electronic properties were obtained after adsorption of Pd atoms to different sides of SWCNT. Partial DOS were also applied to interpret the changes in electronic properties more precisely.

Synergistic effect and degradation mechanism on Fe-Ni/CNTs for removal of 2,4-dichlorophenol in aqueous solution

Fe-Ni bimetallic nanoparticles supported on CNTs (Fe-Ni/CNTs) were synthesized, characterized, and applied for removal of 2,4-dichlorophenol (2,4-DCP) in aqueous solution. The removal performance was enhanced drastically on Fe-Ni/CNTs with respect to monometallic Fe/CNTs. The synergistic effect between Fe-Ni nanoparticles and CNTs has been studied in detail. The research results indicated that the doping of Ni played an important role in promoting the catalytic degradation of 2,4-DCP. And the presence of CNTs not only could effectively reduce the aggregation of nanoparticles but also facilitate the mass transfer of 2,4-DCP and the formation of active atomic hydrogen during the catalytic process. In addition, the removal kinetics of 2,4-DCP by Fe-Ni/CNTs were in agreement with a pseudo-first-order model, and the rate constants were dependent on a number of factors including the initial concentration of 2,4-DCP, the dosage of Fe-Ni/CNTs, pH value of the solution, and doping amount of Ni. The degradation mechanism involved the adsorption by CNTs and catalytic reduction by Fe under the stimulating of Ni, and the preferred dechlorination followed the order of para-Cl > ortho-Cl. The study confirmed that Fe-Ni/CNTs had a potential to be a promising catalytic material for removal of chlorophenol and had a great prospect for practical application.

Facile synthesis of metal nanoparticles decorated magnetic hierarchical carbon microtubes with polydopamine-derived carbon layer for catalytic applications

It is highly desirable but challenging to fabricate a unique hybrid material comprising nanosized copper/cobalt/nickel nanoparticles (NPs) uniformly distributed on magnetic supports. Herein in this work, hierarchical magnetic metal silicate hollow microtubes were prepared using silica coated magnetic N-doped carbon microtubes (NCMTs@Fe3O4@SiO2) as a chemical template; then polydopamine (PDA) was employed to coat onto magnetic metal silicate carbon microtubes (NCMTs@Fe3O4@CuSNTs/CoSNTs/NiSNTs), which can be carbonized to form hierarchical hybrid composites with uniformly-dispersed metallic copper/cobalt/nickel NPs embedded in PDA-derived carbon layers (NCMTs@Fe3O4@SiO2@C/Cu-Co-Ni). Owing to its hierarchical structure, large specific surface area as well as the high density of metal NPs, the resultant NCMTs@Fe3O4@SiO2@C/Ni-Co-Cu could be applied as catalysts towards the reduction of 4-nitrophenol (4-NP). Furthermore, the NCMTs@Fe3O4@SiO2@C/Ni-Co-Cu catalysts could be easily collected and separated by applying an external magnetic field. In particular, it was found that NCMTs@Fe3O4@SiO2@C/Ni exhibited ultra-high catalytic activity on 4-NP reduction in comparison with Cu and Co supported catalysts. In addition, this unique hierarchical structure combined with magnetic recyclability make NCMTs@Fe3O4@SiO2@C/Ni a highly promising candidate for diverse applications.

The effect of aluminum and platinum additives on hydrogen adsorption on mesoporous silicates

Recent theoretical predictions indicate that functional groups and additives could have a favorable impact on the hydrogen adsorption characteristics of sorbents; however, no definite evidence has been obtained to date and little is known about the impact of such modifications on the thermodynamics of hydrogen uptake and overall capacity. In this work, we investigate the effect of two types of additives on the cryoadsorption of hydrogen to mesoporous silica. First, Lewis and Brønsted acid sites were evaluated by grafting aluminum to the surface of mesoporous silica (MCF-17) and characterizing the resulting silicate materials' surface area and the concentration of Brønsted and Lewis acid sites created. Heat of adsorption measurements found little influence of surface acidity on the enthalpy of hydrogen cryoadsorption. Secondly, platinum nanoparticles of 1.5 nm and 7.1 nm in diameter were loaded into MCF-17, and characterized by TEM. Hydrogen absorption measurements revealed that the addition of small amounts of metallic platinum nanoparticles increases by up to two-fold the amount of hydrogen adsorbed at liquid nitrogen temperature. Moreover, we found a direct correlation between the size of platinum particles and the amount of hydrogen stored, in favor of smaller particles.

Optimization of a transferred arc reactor for metal nanoparticle synthesis

The demand for metal nanoparticles is increasing strongly. Transferred arc synthesis is a promising process in this respect, as it shows high production rates, good quality particles and the ability of up-scaling. The influence of several process parameters on the performance of the process in terms of production rate and particle size is investigated. These parameters are the electrode design and adjustment, the gas flow rate and power input. A novel feeding mechanism allows process operation over an extended time period. It is shown that the process is capable of producing pure metal nanoparticles with variable primary particle sizes and comparatively high production rates. Optimal process conditions for a single transferred arc electrode pair are found, which allow further scale-up by numbering up.

Selective oxidation of alcohols by supported gold nanoparticles: recent advances

The review presents a commercially important field of alcohol oxidation using gold nanoparticles. It systematically discusses scope and limitation of various supports on the activity and selectivity of catalyst.

In situ reduction of well-dispersed nickel nanoparticles on hierarchical nickel silicate hollow nanofibers as a highly efficient transition metal catalyst

Ni nanoparticles were immobilized on the hierarchically double-shell nickel silicate hollow nanofibers, the composites exhibited an excellent catalytic activity.

Hematite decorated multi-walled carbon nanotubes (α-Fe2O3/MWCNTs) as sorbents for Cu(ii) and Cr(vi): comparison of hybrid sorbent performance to its nanomaterial building blocks

Hybrid nanostructured sorbents were fabricatedviathe deposition and growth of hematite nanoparticles on carbon nanotubes, and fundamental aspects of their performance toward common heavy metal pollutants were evaluated.

Phytochemically Functionalized Cu and Ag Nanoparticles Embedded in MWCNTs for Enhanced Antimicrobial and Anticancer Properties

Nanomedicine is an emerging field concerned with the use of precision engineered nanomaterials, which leads to the development of novel remedial and diagnostic modalities for human use. In this study, Cu(NO3)2 and AgNO3 precursors were reduced to copper nanoparticles (CuNPs) and silver nanoparticles (AgNPs) using Terminalia arjuna bark extracts under microwave irradiation in the presence of well-dispersed multi-walled carbon nanotubes (MWCNTs) in aqueous medium. The formation of CuNPs or AgNPs and their functionalization with MWCNTs via bioactive molecules of plant extract were evidenced from UV-Vis spectra, XRD, FTIR, FESEM, EDX, and TEM images. The phytochemically functionalized Cu-MWCNTs and Ag-MWCNTs nanomaterials showed enhanced biocide activity, and the inhibitory activity for bacteria was higher than that of fungus. Furthermore, these biohybrid nanomaterials are non-toxic to normal epithelial cells (Vero), whereas they are highly toxic for tested human cancer cells of MDA-MB-231, HeLa, SiHa, and Hep-G2. The cell viability was found to decrease with the increasing dose from 10 to 50 µg mL-1, as well as incubation time from 24 to 72 h. For instance, the cell viability was found to be ~91 % for normal Vero cells and ~76 % for cancer cells for lower dose of 10 µg mL-1.

Engineering Nanostructures by Decorating Magnetic Nanoparticles onto Graphene Oxide Sheets to Shield Electromagnetic Radiations

In this study, a minimum reflection loss of -70 dB was achieved for a 6 mm thick shield (at 17.1 GHz frequency) employing a unique approach. This was accomplished by engineering nanostructures through decoration of magnetic nanoparticles (nickel, Ni) onto graphene oxide (GO) sheets. Enhanced electromagnetic (EM) shielding was derived by selectively localizing the nanoscopic particles in a specific phase of polyethylene (PE)/poly(ethylene oxide) (PEO) blends. By introduction of a conducting inclusion (like multiwall carbon nanotubes, MWNTs) together with the engineered nanostructures (nickel-decorated GO, GO-Ni), the shielding efficiency can be enhanced significantly in contrast to physically mixing the particles in the blends. For instance, the composites showed a shielding efficiency >25 dB for a combination of MWNTs (3 wt %) and Ni nanoparticles (52 wt %) in PE/PEO blends. However, similar shielding effectiveness could be achieved for a combination of MWNTs (3 wt %) and 10 vol % of GO-Ni where in the effective concentration of Ni was only 19 wt %. The GO-Ni sheets facilitated in an efficient charge transfer as manifested from high electrical conductivity in the blends besides enhancing the permeability in the blends. It is envisioned that GO is simultaneously reduced in the process of synthesizing GO-Ni, and this facilitated in efficient charge transfer between the neighboring CNTs. More interestingly, the blends with MWNTs/GO-Ni attenuated the incoming EM radiation mostly by absorption. This study opens new avenues in designing polyolefin-based lightweight shielding materials by engineering nanostructures for numerous applications.

A cheap and efficient catalyst with ultra-high activity for reduction of 4-nitrophenol

Ni/SBA-15 catalyst with ultra-small particle size (7 nm), good dispersion, and ultra-high loading amount (57.4%) of Ni nanoparticles was prepared by a unique in situ thermal decomposition and reduction route. It exhibits excellent catalytic activity and stability for 4-nitrophenol reduction.

Self-assembled plasmonic nanoparticles on vertically aligned carbon nanotube electrodes via thermal evaporation

This study details the development of a large-area, three-dimensional (3D), plasmonic integrated electrode (PIE) system. Vertically aligned multiwalled carbon nanotube (VA-MWNT) electrodes are grown and populated with self-assembling silver nanoparticles via thermal evaporation. Due to the geometric and surface characteristics of VA-MWNTs, evaporated silver atoms form nanoparticles approximately 15-20 nm in diameter. The nanoparticles are well distributed on VA-MWNTs, with a 5-10 nm gap between particles. The size and gap of the self-assembled plasmonic nanoparticles is dependent upon both the length of the MWNT and the thickness of the evaporated silver. The wetting properties of water of the VA-MWNT electrodes change from hydrophilic (∼70°) to hydrophobic (∼120°) as a result of the evaporated silver. This effect is particularly pronounced on the VA-MWNT electrodes with a length of 1 μm, where the contact angle is altered from an initial 8° to 124°. Based on UV-visible spectroscopic analysis, plasmonic resonance of the PIE systems occurs at a wavelength of approximately 400 nm. The optical behavior was found to vary as a function of MWNT length, with the exception of MWNT with a length of 1 μm. Using our PIE systems, we were able to obtain clear surface-enhanced Raman scattering (SERS) spectra with a detection limit of ∼10 nM and an enhancement factor of ∼10(6). This PIE system shows promise for use as a novel electrode system in next-generation optoelectronics such as photovoltaics, light-emitting diodes, and solar water splitting.

Field emission with ultralow turn on voltage from metal decorated carbon nanotubes

A simple and scalable method of decorating 3D-carbon nanotube (CNT) forest with metal particles has been developed. The results observed in aluminum (Al) decorated CNTs and copper (Cu) decorated CNTs on silicon (Si) and Inconel are compared with undecorated samples. A significant improvement in the field emission characteristics of the cold cathode was observed with ultralow turn on voltage (Eto ∼ 0.1 V/μm) due to decoration of CNTs with metal nanoparticles. Contact resistance between the CNTs and the substrate has also been reduced to a large extent, allowing us to get stable emission for longer duration without any current degradation, thereby providing a possibility of their use in vacuum microelectronic devices.

Carbon dioxide bio-fixation and wastewater treatment via algae photochemical synthesis for biofuels production

Utilizing the energy, nutrients and CO₂held within residual waste materials to provide all necessary inputs except for sunlight, the cultivation of algae becomes a closed-loop engineered ecosystem. Developing this green biotechnology is a tangible step towards a waste-free sustainable society.

Copper-encapsulated vertically aligned carbon nanotube arrays

A new procedure is described for the fabrication of vertically aligned carbon nanotubes (VACNTs) that are decorated, and even completely encapsulated, by a dense network of copper nanoparticles. The process involves the conformal deposition of pyrolytic carbon (Py-C) to stabilize the aligned carbon-nanotube structure during processing. The stabilized arrays are mildly functionalized using oxygen plasma treatment to improve wettability, and they are then infiltrated with an aqueous, supersaturated Cu salt solution. Once dried, the salt forms a stabilizing crystal network throughout the array. After calcination and H2 reduction, Cu nanoparticles are left decorating the CNT surfaces. Studies were carried out to determine the optimal processing parameters to maximize Cu content in the composite. These included the duration of Py-C deposition and system process pressure as well as the implementation of subsequent and multiple Cu salt solution infiltrations. The optimized procedure yielded a nanoscale hybrid material where the anisotropic alignment from the VACNT array was preserved, and the mass of the stabilized arrays was increased by over 24-fold because of the addition of Cu. The procedure has been adapted for other Cu salts and can also be used for other metal salts altogether, including Ni, Co, Fe, and Ag. The resulting composite is ideally suited for application in thermal management devices because of its low density, mechanical integrity, and potentially high thermal conductivity. Additionally, further processing of the material via pressing and sintering can yield consolidated, dense bulk composites.

Single walled carbon nanotube-metal oxide nanocomposites for reversible and reproducible storage of hydrogen

Composite material consisting of single walled carbon nanotubes (SWCNTs) and metal oxide nanoparticles has been prepared and their hydrogen storage performance is evaluated. Metal oxides such as tin oxide (SnO2), tungsten trioxide (WO3), and titanium dioxide (TiO2) are chosen as the composite constituents. The composites have been prepared by means of ultrasonication. Then, the composite samples are deposited on alumina substrates and at 100 °C in a Sieverts-like hydrogenation setup. Characterization techniques such as transmission electron microscopy (TEM), Raman spectroscopy, scanning electron microscopy (SEM), powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, energy dispersive spectroscopy (EDS), CHN elemental analysis, and thermogravimetric (TG) measurements are used to analyze the samples at various stages of experiments. Hydrogen storage capacity of the composites namely, SWCNT-SnO2, SWCNT-WO3, and SWCNT-TiO2 are found to be 1.1, 0.9, and 1.3 wt %, respectively. Hydrogenated composite samples are stable at room temperature and desorption of hydrogen is found to be 100% reversible. Desorption temperature ranges and binding energy ranges of hydrogen have been measured from the desorption studies. The hydrogenation, dehydrogenation temperature, and binding energy of hydrogen fall in the recommended range of a suitable hydrogen storage medium applicable for fuel cell applications. Reproducibility and deterioration level of the composite samples have also been examined.

Template directed formation of nanoparticle decorated multi-walled carbon nanotube bundles with uniform diameter

Bundles of multi-walled carbon nanotubes of uniform diameter decorated with Ni nanoparticles were synthesized using mesoporous silicates as templates. The ordered morphology and the narrow pore size distribution of mesoporous silicates provide an ideal platform to synthesize uniformly sized carbon nanotubes. In addition, homogeneous sub-10 nm pore sizes of the templates allow in situ formation of catalytic nanoparticles with uniform diameters which end up decorating the carbon nanotubes. The resulting carbon nanotubes are multi-walled with a uniform diameter corresponding to the pore diameter of the template used during the synthesis that are decorated with the catalysts used to synthesize them. They have a narrow size distribution which can be used in many energy related fields of research.

Is hydrogen storage possible in metal-doped graphite 2D systems in conditions found on Earth?

Density functional theory (DFT) calculations are performed for the adsorption energy of hydrogen and oxygen on graphene decorated with a wide set of metals (Li, Na, K, Al, Ti, V, Ni, Cu, Pd, Pt). It is found that oxygen interferes with hydrogen adsorption by either blocking the adsorption site or by the irreversible oxidation of the metal decoration. The most promising decorations are Ni, Pd, and Pt due to a reasonable relationship of adsorption energies which minimize the oxygen interference. The DFT results are used to parametrize a statistical mechanical model which allows evaluation of the effect of partial pressures in the gas phase during storage. According to this model, even in the most promising case, it is necessary to reduce the oxygen partial pressure close to ultrahigh vacuum conditions to allow hydrogen storage.