Structural control of the photodynamics of boron-dipyrrin complexes

Quantifying near-symmetric molecular distortion using symmetry-coordinate structural decomposition

We imagine molecules to be perfect, but rigidified units can be designed to bend from their ideal shape, discarding their symmetric elements as they progress through vibrations and larger, more permanent distortions. The shape of molecules is either simulated or measured by crystallography and strongly affects chemical properties but, beyond an image or tabulation of atom-to-atom distances, little is often discussed of the accessed conformation. We have simplified the process of shape quantification across multiple molecular types with a new web-accessible program - SCSD - through which a molecular subunit possessing near-symmetry can be dissected into symmetry coordinates with ease. This parameterization allows a common set of numbers for comparing and understanding molecular shape, and is a simple method for database analysis; this program is available at https://www.kingsbury.id.au/scsd.

Highly crystalline and fluorescent BODIPY-labelled phenyl-triazole-coumarins as n-type semiconducting materials for OFET devices

In this work, the synthesis of BODIPY-phenyl-triazole labelled coumarins (BPhTCs) using a two-step approach is described. The influence of the BODIPY appending on the photophysical, electrochemical and thermal properties of the phenyl-triazole-coumarin precursors (PhTCs) was investigated. Band gap energies were measured by absorption spectroscopy (2.20 ± 0.02 eV in the solid and 2.35 ± 0.01 eV in solution) and cyclic voltammetry (2.10 ± 0.05 eV). The results are supported by DFT calculations confirming the presence of lowest LUMO levels that facilitate the electron injection and stabilize the electron transport. Their charge-transport parameters were measured in Organic Field-Effect Transistor (OFET) devices. BPhTCs showed an ambipolar transistor behavior with good n-type charge mobilities (10-2 cm2V-1s-1) allowing these derivatives to be employed as promising semiconducting crystalline and fluorescent materials with good thermal and air stability up to 250 °C.

Structural Engineering of Iridium(III) Phosphors with Imidazo[4,5-b]pyrazin-2-ylidene Cyclometalates for Efficient Blue Electroluminescence

Iridium(III) complexes are particularly noted for their excellent potentials in fabrication of blue organic light-emitting diodes (OLEDs), but the severe efficiency roll-off largely hampered their practical applications. To reveal the underlying characteristics, three Ir(III) complexes, namely f-ct5c, f-ct5d, and f-ct11, bearing imidazo[4,5-b]pyrazin-2-ylidene cyclometalates are prepared and characterized in detail. Both f-ct5c and f-ct5d (also their mixture f-ct5mix) gave intensive blue emissions peaking at ≈465 nm with short radiative lifetimes of 1.76 and 2.45 µs respectively, in degassed toluene. Alternatively, f-ct11 with two 4-tert-butylphenyl substituents on each imidazo[4,5-b]pyrazin-2-ylidene entity, possessed a bluish-green emission (508 nm) together with an extended radiative lifetime of 34.3 µs in the dispersed PMMA matrix. Consequently, the resulting solution-processed OLED with f-ct11 delivered a maximum external quantum efficiency (EQEmax ) of 6.5% with serious efficiency roll-offs. In contrast, f-ct5mix based device achieved a high EQEmax of 27.2% and the EQE maintained at 23.0% of 1000 cd m-2 . Furthermore, the hyper-OLEDs with f-ct5mix as the sensitizer and v-DABNA as the terminal emitter afford narrowed emission with a considerably high EQEmax exceeding 32%, affirming the potential of f-ct5mix to serve as both the emitter and sensitizer in OLEDs.

Anti-Arrhenius behavior of electron transfer reactions in molecular dimers

Rates of chemical reactions typically accelerate as the temperature rises, following the Arrhenius law. However, electron transfer reactions may exhibit weak temperature dependence or counterintuitive behavior, known as anti-Arrhenius behavior, wherein reaction rates decrease as temperature increases. Solvent reorganization energy and torsion-induced changes in electronic couplings could contribute to this unusual behavior, but how each contributes to the overall temperature dependence is unclear. One can decelerate the charge recombination process in photogenerated radical pairs or charge-separated states by harnessing this often-overlooked phenomenon. This means that we could achieve long-lived radical pairs without relying on conventional cooling. Using a series of homo molecular dimers, we showed that the degree of torsional hindrance dictates temperature-dependent torsion-induced changes in electronic coupling and, therefore, charge recombination rates. The overall temperature dependence is controlled by how changes in electronic coupling and the temperature-dependent solvent reorganization energy contribute to the rates of charge recombination. Our findings pave the way for rationally designing molecules that exhibit anti-Arrhenius behavior to slow down charge recombination, opening possibilities for applications in energy-related and quantum information technologies.

Tuning of Redox Potentials and LUMO Levels of BODIPYs via Site-Selective Direct Cyanation

Through a strong oxidant Pb(OAc)4 promoted oxidative nucleophilic hydrogen substitution, site-selective direct and stepwise cyanation of BODIPYs using tetrabutylammonium cyanide was developed to give α-cyanated BODIPY derivatives. Characterization of optical and electrochemical properties of these dyes provides substantial enhancement of the electron affinity, with a reduction potential and LUMO level as low as -0.04 V and -4.43 eV, respectively. Radical anions of these electron-deficient 3,5-dicyanated BODIPYs were characterized by absorption and EPR spectroscopy.

Theoretical Insights into a Near-Infrared Fluorescent Probe NI-VIS Based on the Organic Molecule for Monitoring Intracellular Viscosity

So many biological functional disorders and diseases, such as atherosclerosis, hypertension, diabetes, Alzheimer's disease, as well as cell malignancy are closely related with the intracellular viscosity. A safe and effective intracellular viscosity detecting method is desired by the biomedical community. Recently, a novel near-infrared fluorescent probe NI-VIS with a twisting intramolecular charge transfer mechanism was developed. The capability of this probe to visualize the viscosity variation in cirrhotic liver tissues and map the micro viscosity in vivo were testified using an experiment. In this work, the twisting intramolecular charge transfer mechanism and fluorescent properties of the probe NI-VIS were studied in detail under quantum mechanical method. The low energy barrier among the different conformations of the probe indicated the occurrence of twisting intramolecular charge transfer due to the rotation of the aryl group in the probe molecule while within the low viscosity environment. The electronic structure analysis on different probe conformations revealed the electron transfer process of the probe under optical excitation. All these theoretical results could provide insights into understand in greater depth the principles and build highly effective fluorescent probe to monitor the viscosity in biological samples.

Dense and Acidic Organelle-Targeted Visualization in Living Cells: Application of Viscosity-Responsive Fluorescence Utilizing Restricted Access to Minimum Energy Conical Intersection

Cell-imaging methods with functional fluorescent probes are an indispensable technique to evaluate physical parameters in cellular microenvironments. In particular, molecular rotors, which take advantage of the twisted intramolecular charge transfer (TICT) process, have helped evaluate microviscosity. However, the involvement of charge-separated species in the fluorescence process potentially limits the quantitative evaluation of viscosity. Herein, we developed viscosity-responsive fluorescent probes for cell imaging that are not dependent on the TICT process. We synthesized AnP₂-H and AnP₂-OEG, both of which contain 9,10-di(piperazinyl)anthracene, based on 9,10-bis(N,N-dialkylamino)anthracene that adopts a nonflat geometry at minimum energy conical intersection. AnP₂-H and AnP₂-OEG exhibited enhanced fluorescence as the viscosity increased, with sensitivities comparable to those of conventional molecular rotors. In living cell systems, AnP₂-OEG showed low cytotoxicity and, reflecting its viscosity-responsive property, allowed specific visualization of dense and acidic organelles such as lysosomes, secretory granules, and melanosomes under washout-free conditions. These results provide a new direction for developing functional fluorescent probes targeting dense organelles.

Aryl-Boron-Substituted BODIPYs: Direct Access via Aluminum-Chloride-Mediated Arylation from Arylstannanes and Tuning the Optoelectronic Properties

An efficient procedure is presented for functionalization of BODIPYs at boron with arylstannanes as weak nucleophiles in the presence of aluminum chloride, providing new aryl-boron-substituted BODIPY and aza-BODIPY derivatives of singular importance. Most of these aryl-boron-substituted BODIPYs showed bright emission in the aqueous solution with significant aggregation-induced emission enhancement and high solid-state emission as a result of the restricted rotation of the meso-phenyl group and boron-substituted aryl groups as well as the formation of J-type aggregates.

Synthesis and photophysical investigations of pyridine-pyrazolate bound boron(III) diaryl complexes

This study presents the design and synthetic pathway of unsymmetric ligands based on pyridine-pyrazolate scaffold with Donor-Acceptor (D-A) molecular arrays and their boron complexes to achieve a large Stokes shift. Intermolecular charge transfer (ICT) triggered by the uneven molecular charge distribution from electronically dense pyrazolate (donor) part of the ligands to electron-deficient boron centre (acceptor) resulted in a mega Stokes shift up to 263 nm for selected compounds while retaining the characteristic quantum efficiency and chemical stability. The photophysical properties of derivatization of pyrazolate group in the pyridine-pyrazolate scaffold of diaryl boron complexes were explored based on UV-Visible, steady-state and time-resolved fluorescence spectroscopy. An interesting dual emission along with quenching behaviour was also observed for 2-(6-methoxynaphthelene) 5-(2-pyridyl) pyrazolate boron complex (P₅) due to the formation of a twisted intermolecular charge transfer (TICT) state from a locally excited (LE) state rendering it a potential candidate for sensing applications based on H-Bond quenching. In addition, the extended excited state lifetime of the reported compounds compared to classical boron-dipyrromethene (BODIPY) makes them suitable as potential probes for analytical applications requiring a longer excited state lifetime.

Phototoxicity of BODIPY in long-term imaging can be reduced by intramolecular motion

For long-term live-cell fluorescence imaging and biosensing, it is crucial to work with a dye that has high fluorescence quantum yield and photostability without being detrimental to the cells. In this paper, we demonstrate that neutral boron-dipyrromethene (BODIPY)-based molecular rotors have great properties for high-light-dosage demanding live-cell fluorescence imaging applications that require repetitive illuminations. In molecular rotors, an intramolecular rotation (IMR) allows an alternative route for the decay of the singlet excited state (S₁) via the formation of an intramolecular charge transfer state (CT). The occurrence of IMR reduces the probability of the formation of a triplet state (T₁) which could further react with molecular oxygen (³O₂) to form cytotoxic reactive oxygen species, e.g., singlet oxygen (¹O₂). We demonstrate that the oxygen-related nature of the phototoxicity for BODIPY derivatives can be significantly reduced if a neutral molecular rotor is used as a probe. The studied neutral molecular rotor probe shows remarkably lower phototoxicity when compared with both the non-rotating BODIPY derivative and the cationic BODIPY-based molecular rotor in different light dosages and dye concentrations. It is also evident that the charge and localization of the fluorescent probe are as significant as the IMR in terms of the phototoxicity in a long-term live-cell imaging.

Transforming Dyes into Fluorophores: Exciton-Induced Emission with Chain-like Oligo-BODIPY Superstructures

Herein we present a systematic study demonstrating to which extent exciton formation can amplify fluorescence based on a series of ethylene-bridged oligo-BODIPYs. A set of non- and weakly fluorescent BODIPY motifs was selected and transformed into discrete, chain-like oligomers by linkage via a flexible ethylene tether. The prepared superstructures constitute excitonically active entities with non-conjugated, Coulomb-coupled oscillators. The non-radiative deactivation channels of Internal Conversion (IC), also combined with an upstream reductive Photoelectron Transfer (rPET) and Intersystem Crossing (ISC) were addressed at the monomeric state and the evolution of fluorescence and (non-)radiative decay rates studied along the oligomeric series. We demonstrate that a "masked" fluorescence can be fully reactivated irrespective of the imposed conformational rigidity. This work challenges the paradigm that a collective fluorescence enhancement is limited to sterically induced motional restrictions.

O-BODIPYs as fluorescent labels for sugars: glucose, xylose and ribose

Fluorescent 1 : 1, 1 : 2 and 1 : 3 sugar-O-BODIPY conjugates of glucose, xylose and ribose were characterised by 1H–11B HMBC and 11B NMR to discriminate between boron bound to 1,2-, 1,3- or 1,4-diol sites and furanose/pyranose sugar forms.

BODIPY derivatives as fluorescent reporters of molecular activities in living cells

Fluorescent compounds have become indispensable tools for imaging molecular activities in the living cell. 4,4-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is currently one of the most popular fluorescent reporters due to its unique photophysical properties. This review provides a general survey and presents a summary of recent advances in the development of new BODIPY-based cellular biomarkers and biosensors. The review starts with the consideration of the properties of BODIPY derivatives required for their application as cellular reporters. Then review provides examples of the design of sensors for different biologically important molecules, ions, membrane potential, temperature and viscosity defining the live cell status. Special attention is payed to BODPY-based phototransformable reporters.

The bibliography includes 339 references.

Excitation Energy Transfer between bodipy Dyes in a Symmetric Molecular Excitonic Seesaw

We examine the redistribution of energy between electronic and vibrational degrees of freedom that takes place between a π-conjugated oligomer, a phenylene-butadiynylene, and two identical boron-dipyrromethene (bodipy) end-caps using femtosecond transient absorption spectroscopy, single-molecule spectroscopy, and nonadiabatic excited-state molecular dynamics (NEXMD) modeling techniques. The molecular structure represents an excitonic seesaw in that the excitation energy on the oligomer backbone can migrate to either one end-cap or the other, but not to both. The NEXMD simulations closely reproduce the characteristic time scale for redistribution of electronic and vibrational energy of 2.2 ps and uncover the vibrational modes contributing to the intramolecular relaxation. The calculations indicate that the dihedral angle between the bodipy dye and the oligomer change upon excitation of the oligomer. Single-molecule experiments reveal a difference in photoluminescence lifetime of the bodipy dyes depending on whether they are excited by direct absorption or by redistribution of energy from the backbone. This difference in lifetime may be attributed to the difference in dihedral angle. The simulations also suggest that a strong coupling can occur between the two end-caps, giving rise to a reversible shuttling of excitation energy between them. Strong coupling should lead to a pronounced loss in polarization memory of the fluorescence since the oligomer backbone tends to be slightly distorted and the two bodipy transition dipoles have different orientations. A sensitive single-molecule technique is presented to test for such coupling. However, although redistribution of electronic and vibrational energy between the end-caps can occur, it appears to be unidirectional and irreversible, suggesting that an additional localization mechanism is at play which is, as yet, not fully accounted for in the simulations.

Controlling the triplet states and their application in external stimuli-responsive triplet-triplet-annihilation photon upconversion: from the perspective of excited state photochemistry

The property of organic light-responsive materials is determined by their electronic excited states to a large extent, for instance, the radiative decay rate constants, redox potentials, and lifetimes. Tuning the excited state properties with external stimuli will lead to versatile functional materials; a representative example is the fluorescence molecular probes, in which the singlet excited states are controlled by the external stimuli, i.e., by interaction with the analytes. In comparison, controlling the triplet excited state with external stimuli has been rarely reported, although it is also crucial for the development of novel materials for targeted photodynamic therapy (PDT) reagents and phosphorescent molecular probes. The reported results show that the principles used in singlet excited state tuning are unable to be simply applied to the triplet excited state. In this review article, we summarized the recent results on controlling the triplet excited states by the external stimuli (chemical or light), and the application of the triplet state tuning in the chemical/light controllable triplet-triplet-annihilation upconversion (TTA UC). We discussed the methods for the control of the triplet states, as well as singlet excited state, for the purpose of controlling the TTA UC. Both successful and unsuccessful methods are discussed. This information is helpful for understanding the photophysical processes in which the triplet excited state is involved, and the development of novel external stimuli-responsive triplet photosensitizers.

Impact of iodine loading and substitution position on intersystem crossing efficiency in a series of ten methylated-meso-phenyl-BODIPY dyes

Four core and six distyryl-extended methylated-meso-phenyl-BODIPY dyes with varying iodine content were synthesized. The influence of iodine loading and substitution position on the photophysical properties of these chromophores was evaluated. Selective iodine insertion at the 2- and 6-positions of the methylated-meso-phenyl-BODIPY core, rather than maximum iodine content, resulted in the highest intersystem crossing efficiency. Iodination of the distyryl-extended BODIPY core afforded intersystem crossing quantum yields comparable to 2,6-diiodo-BODIPY. Inclusion of an iodine at the para-meso-phenyl position generally enhanced non-radiative decay in the BODIPY excited-state, leading to lower fluorescence and intersystem crossing quantum yield values. Iodine substitution at the styryl-positions resulted in negligible changes to the excited-state dynamics. This study highlights: (1) the rate of radiative decay is similar in all ten derivatives (on the order of 1 × 108 s-1), (2) iodination of the 2,6-positions results in the greatest enhancement of intersystem crossing efficiency, (3) care must be taken when modifying the para-meso-phenyl position as it could have detrimental effects on the excited-state dynamics, (4) the excited-state is negligibly affected by iodination of the styryl groups, potentially enabling orthogonal functionalization without modifying the molecular photophysics, (5) distyryl extension of the chromophore core diminishes rates of non-radiative decay and intersystem crossing, resulting in higher fluorescence quantum yields and lower intersystem crossing yields in the π-extended derivatives compared to the core BDP derivatives, and (6) DFT calculations provide insight into the electronic and structural factors regulating intersystem crossing and vibrational relaxation in these molecules.

Does Twisted π-Conjugation Framework Always Induce Efficient Intersystem Crossing? A Case Study with Benzo[b]- and [a]Phenanthrene-Fused BODIPY Derivatives and Identification of a Dark State

The photophysical properties, especially the intersystem crossing (ISC) of two heavy-atom-free BODIPY derivatives with twisted π-conjugated frameworks (benzo[b]-fused BODIPY, BDP-B; and [a]phenanthrene-fused BODIPY, BDP-P), are studied with steady-state and time-resolved optical and electron paramagnetic resonance (TREPR) spectroscopic methods as well as with ADC(2) theoretical investigations. Interestingly, BDP-B has a planar π-conjugation framework, but it displays weaker UV-vis absorption (ε = 3.8 × 10⁴ M^-1 cm^-1 at 569 nm) and fluorescence (Φ_F < 0.1%), a short-lived singlet-excited state (fluorescence lifetime, τ_F = 0.2 ns), and a long-lived triplet state (τ_T = 132.3 μs). In comparison, the more twisted BDP-P shows stronger UV-vis absorption (ε = 9.8 × 10⁴ M^-1 cm^-1 at 640 nm) and fluorescence (Φ_F = 70%), longer singlet-excited-state lifetime (τ_F = 6.4 ns), and shorter triplet-state lifetime (τ_T = 18.9 μs). In contrast to helicenes (Φ_T = ca. 90%), the ISC of BDP-P and BDP-B is nonefficient (Φ_T < 23%). The electron spin selectivity of the ISC of the derivatives is different, manifested by the phase pattern of the TREPR spectra as AAEAEE and EEEAAA for BDP-B and BDP-P, respectively. The spatially confined T₁ state wave function of the twisted molecule keeps the T₁ state energy high (1.44-1.61 eV). A dark S₁ state was identified for BDP-B. This work demonstrated that the twisted π-conjugated framework does not necessarily induce efficient ISC and we found a dark singlet state for BODIPY, which is rare.

Luminescence from open-shell, first-row transition metal dipyrrin complexes

Several first-row transition metal complexes of the 1,9-bis(2',4',6'-triphenylphenyl)-5-mesityl dipyrrinato ligand and its tetrahalogenated analogues have been synthesized and their luminescence spectra obtained. The protonated ligands, as well as the Li(i), Mn(ii), Cu(i), Cu(ii), and Zn(ii) chelates show appreciable luminescence, despite the paramagnetism of the Mn(ii) and Cu(ii) ions. Fluorescence quantum yields (ΦF) as high as 0.67 were observed for the zinc complex. Luminescence was partially quenched by the introduction of heavy halogens to the backbone of the ligand, as well as by the introduction of paramagnetic metal ions. Room-temperature, solution state phosphorescence was observed from the halogenated dipyrrinato lithium salts, as well as from the non-halogenated Mn(ii) complex.

Torsion-Induced Nonradiative Relaxation of the Singlet Excited State of meso-Thienyl Bodipy and Charge Separation, Charge Recombination-Induced Intersystem Crossing in Its Compact Electron Donor/Acceptor Dyads

We prepared a series of meso-thienyl boron-dipyrromethene (Bodipy) derivatives to investigate the spin-orbit charge transfer intersystem crossing (SOCT-ISC). The photophysical properties of the compounds were studied by steady-state and femtosecond/nanosecond transient absorption spectroscopy, as well as density functional theory (DFT) computations. Different from the meso-phenyl Bodipy analogues, the meso-thienyl Bodipy are weakly fluorescent. Based on femtosecond transient absorption and DFT computations, we propose that the torsion of the thienyl group and the distortion of the Bodipy core (19.7 ps) in the S₁ state lead to a conical intersection on the potential energy surface as an efficient nonradiative decay channel (408 ps), which is responsible for the observed weak fluorescence as compared to the meso-phenyl analogue. The increased fluorescence quantum yield (from 5.5 to 14.5%) in viscous solvents supports this hypothesis. With the electron donor 4'-hydroxylphenyl moiety attached to the meso-thienyl unit, the fast charge separation (CS, 15.3 ps) and charge recombination (CR, 238 ps) processes outcompete the torsion-induced nonradiative decay and induce fast ISC through the SOCT-ISC mechanism. The triplet quantum yield of the electron donor/acceptor dyad is highly dependent on solvent polarity (Φ_T = 1.9-45%), which supports the SOCT-ISC mechanism, and the triplet-state lifetime is up to 247.3 μs. Using the electron donor-acceptor dyad showing SOCT-ISC as a triplet photosensitizer, efficient triplet-triplet annihilation (TTA) upconversion was observed with a quantum yield of up to 6.0%.

Excited state dynamics of BODIPY-based acceptor-donor-acceptor systems: a combined experimental and computational study

Donor-bridge-acceptor systems based on boron dipyrromethene (BODIPY) are attractive candidates for bio-imagining and sensing applications because of their sensitivity to temperature, micro-viscosity and solvent polarity. The optimization of the properties of such molecular sensors requires a detailed knowledge of the relation between the structure and the photophysical behavior in different environments. In this work we have investigated the excited-state dynamics of three acceptor-donor-acceptor molecules based on benzodithiophene and BODIPY in solvents of different polarities using a combination of ultrafast spectroscopy and DFT-based electronic structure calculations. Transient absorption spectra show that upon photoexcitation an initial excited species with an induced absorption band in the near-infrared regime is formed independent of the solvent polarity. The subsequent photophysical processes strongly depend on the solvent polarity. In non-polar toluene this initial excited state undergoes a structural relaxation leading to a delocalized state with partial charge transfer character, while in the more polar tetrahydrofuran a fully charge separated state is formed. The results clearly show how factors such as donor-acceptor distance and restricted rotational motion by steric hindrance can be used to tune the excited state photophysics to optimize such systems for specific applications.

Synthesis, Structure and Photophysical Properties of a New Class of Inherently Chiral Boron(III) Chelates-The tert-Leucine Complexes

A new family of boron(III) chelates is introduced whereby molecular chirality, confirmed by circular dichroism, is imported during synthesis such that isolation of the diastereoisomers does not require separation procedures. The photophysical properties of two members of the family have been examined: the N,O,O-salicylaldehyde-based derivative shows pronounced intramolecular charge-transfer character in fluid solution and is weakly fluorescent, with a large Stokes shift. The corresponding 2-methylamino-benzaldehyde-derived N,N,O-chelate absorbs and fluoresces in the visible region with a much smaller Stokes shift. Orange fluorescence is also observed for this compound as a cast film. Temperature-dependence studies show that decay of the fluorescent state is weakly activated but emission is less than quantitative at 77 K. Quite rare for boron(III)-based chelates, this derivative undergoes intersystem crossing to form a meta-stable triplet-excited state. X-ray crystal structures are reported for both compounds, along with simulated ECD spectra.

The effect of hydrogen bonds on the ultrafast relaxation dynamics of a BODIPY dimer

The influence of hydrogen bonds (H-bonds) in the structure, dynamics, and functionality of biological and artificial complex systems is the subject of intense investigation. In this broad context, particular attention has recently been focused on the ultrafast H-bond dependent dynamical properties in the electronic excited state because of their potentially dramatic consequences on the mechanism, dynamics, and efficiency of photochemical reactions and photophysical processes of crucial importance for life and technology. Excited-state H-bond dynamics generally occur on ultrafast time scales of hundreds of femtoseconds or less, making the characterization of associated mechanisms particularly challenging with conventional time-resolved techniques. Here, 2D electronic spectroscopy is exploited to shed light on this still largely unexplored dynamic mechanism. An H-bonded molecular dimer prepared by self-assembly of two boron-dipyrromethene dyes has been specifically designed and synthesized for this aim. The obtained results confirm that upon formation of H-bonds and the dimer, a new ultrafast relaxation channel is activated in the ultrafast dynamics, mediated by the vibrational motions of the hydrogen donor and acceptor groups. This relaxation channel also involves, beyond intra-molecular relaxations, an inter-molecular transfer process. This is particularly significant considering the long distance between the centers of mass of the two molecules. These findings suggest that the design of H-bonded structures is a particularly powerful tool to drive the ultrafast dynamics in complex materials.

Exploiting a Neutral BODIPY Copolymer as an Effective Agent for Photodynamic Antimicrobial Inactivation

We report the synthesis and photophysical properties of a neutral BODIPY photosensitizing copolymer (poly-8-(4-hydroxymethylphenyl)-4,4-difluoro-2,6-diethynyl-4-bora-3a,4a-diaza-s-indacene) containing ethynylbenzene links between the BODIPY units. The copolymer absorbs further towards the red in the UV-vis spectrum compared to the BODIPY precursor. Photolysis of the polymer produces a singlet excited state which crosses to the triplet surface in less than 300 ps. This triplet state was used to form singlet oxygen with a quantum yield of 0.34. The steps leading to population of the triplet state were studied using time-resolved spectroscopic techniques spanning the pico- to nanosecond timescales. The ability of the BODIPY polymer to generate a biocidal species for bactericidal activity in both solution- and coating-based studies was assessed. When the BODIPY copolymer was dropcast onto a surface, 4 log and 6 log reductions in colony forming units/ml representative of Gram-positive and Gram-negative bacteria, respectively, under illumination at 525 nm were observed. The potent broad-spectrum antimicrobial activity of a neutral metal-free copolymer when exposed to visible light conditions may have potential clinical applications in infection management.

Isopinocampheyl-based C-BODIPYs: a model strategy to construct cost-effective boron-chelate emitters of circularly polarized light

Use of building blocks coming from Nature (Chiral Pool) as a new strategy towards cheap and efficient CPL emitters based on boron chelates.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Electrochemical and Solvent-Mediated Visible-to-Near-Infrared Spectroscopic Switching of Benzoselenadiazole Fluorophores

A series of electronic push-pull, pull-pull, and push fluorophores has been prepared from a benzoselenadiazole core so that their spectroscopic, electrochemical, spectro-electrochemical, and spectro-electrofluorescence properties could be examined. The emission wavelengths and fluorescence quantum yields (Φ_fl ) of the N,N-dimethyl fluorophores were contingent on the solvent polarity and they ranged from 615 to 850 nm in aprotic solvents. The positive solvatochromism and the quenched Φ_fl in polar solvents were consistent with an intramolecular charge-transfer state (ICT). Meanwhile, a locally excited state (LE) was assigned in nonpolar solvents from the blue-shifted emission and high Φ_fl . The N,N-dimethylamine fluorophores examined could be both electrochemically oxidized and reduced, whereas the symmetric dinitro pull-pull derivative could be only reversibly reduced. Courtesy of their electrochemical reversibility, the fluorophores could reversibly change color from yellow to blue with an applied potential in addition to switching off their emission. The absorption of the electrochemically generated intermediates of the N,N-dimethyl derivatives spanned 500 nm over the visible and the NIR regions. The colors could be switched for upwards of two hours with applied potential, illustrating their potential use as electroactive materials in electrochromic devices.

3,5-Anthryl-Bodipy dyad/triad: Preparation, effect of F-B-F induced conformation restriction on the photophysical properties, and application in triplet-triplet-annihilation upconversion

We prepared a series of compact Bodipy-anthryl electron donor/acceptor triads and dyads by attaching anthryl moieties at the 3-,5-positions of the Bodipy core, with a novel conformation restriction approach, to study the spin-orbit charge transfer intersystem crossing (SOCT-ISC). The conformation restrictions are imposed by the BF₂ unit of Bodipy without invoking the previously reported method with 1,7-dimethyl or 1,3-dimethyl groups. Our new approach shows a few advantages, including the stronger electron accepting ability of the methyl-free Bodipy core (reduction potential anodically shifted by +0.3 V vs the methylated Bodipy), red-shifted absorption (by 21 nm), and longer triplet state lifetime (372 µs vs 126 µs). The effects of the different mutual orientations of the electron donor and acceptor on ultraviolet-visible absorption, fluorescence, triplet state quantum yields, and lifetimes were studied. Triads with orthogonal geometries show higher singlet oxygen quantum yields (Φ_Δ = 37%) than those with more coplanar geometries. Since the non-radiative decay for the S₁ state is significant in the parent Bodipy chromophore (Φ_F = 6.0%), we propose that in dyads/triads, the charge separation and recombination-induced ISC outcompete the non-radiative decay to the ground state, which is new in the study of SOCT-ISC. Density functional theory computation indicated a shallow torsion potential energy curve as compared to the meso-anthryl-Bodipy dyad analog, which may contribute a low triplet state quantum yield of the new dyads/triads. Triplet-triplet annihilation upconversion was performed with the electron donor/acceptor dyads as the triplet photosensitizer, with an upconversion quantum yield of 12.3%.

A Time-Resolved Spectroscopic Investigation of a Novel BODIPY Copolymer and Its Potential Use as a Photosensitiser for Hydrogen Evolution

A novel 4,4-difuoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) copolymer with diethynylbenzene has been synthesised, and its ability to act as a photosensitiser for the photocatalytic generation of hydrogen was investigated by time-resolved spectroscopic techniques spanning the ps- to ns-timescales. Both transient absorption and time-resolved infrared spectroscopy were used to probe the excited state dynamics of this photosensitising unit in a variety of solvents. These studies indicated how environmental factors can influence the photophysics of the BODIPY polymer. A homogeneous photocatalytic hydrogen evolution system has been developed using the BODIPY copolymer and cobaloxime which provides hydrogen evolution rates of 319 μmol h⁻¹ g⁻¹ after 24 h of visible irradiation.

BODIPYs bearing a dimethylaminopropoxy substituent for imaging and photodynamic inactivation of bacteria

A new BODIPY (BDP 1) bearing a dimethylaminopropoxy group attached to a phenylene unit was synthesized. This compound was brominated to obtain the halogenated analog BDP 2, which was designed to enhance the photodynamic effect of BODIPY to kill bacteria without an intrinsic cationic charge. The basic amino group located at the end of the propoxy bridge can acquire a positive charge by protonation in an aqueous medium, increasing the binding to bacterial cells. Interaction and photokilling activity mediated by these compounds was evaluated in Staphylococcus aureus and Escherichia coli. BDP 1 and BDP 2 were rapidly bound to bacterial cells, showing bioimages with green emission. Complete elimination of S. aureus was detected when cells were incubated with 1 μM BDP 2 and irradiated for 5 min. Comparable photoinactivation was obtained with E. coli, after an irradiation of 30 min. Furthermore, BDP 2 was effective to kill bacteria at very low concentration (0.5 μM). Thus, BDP 1 showed mainly interesting properties as a fluorophore, whereas BDP 2 was highly effective photosensitizer as a broad-spectrum antibacterial agent.

Absorption and fluorescence properties of non-symmetric benzo-, furo-, and thieno-fused structures at the b bonds in the BODIPY frame

The influence of furo-, thieno-, and benzo-fused structures at the b bonds in the BODIPY frame on the optical properties is investigated by TD-CAM-B3LYP and RI-CC2 calculations. The most important result is that substituents at the b bond of the BODIPY core affect strongly the S₁-S₂ gaps. In contrast to the S₁ (local excited (LE-type)) state, energy of which is nearly the same for all the substituents at the b bond, energy of the S₂ (charge transfer (CT-type)) state depends strongly on the nature of the substituent and decreases in the following order: furo-fused > thieno-fused > benzo-fused. In the last case the inversion of S₁ and S₂ levels occurs. No red shift of the main long-wave absorption transition and no substantial changes in its intensity can be predicted by the calculations for benzo[b]-derivative (vertical energy (E_v) is 2.95 eV, oscillator strength (f) is 0.80) relative to furo- (E_v = 2.97 eV, f = 0.69) and thieno-derivatives (E_v = 2.95 eV, f = 0.65). However, the dramatic decrease of the fluorescence quantum yield is expected owing to positions of their LE-type (E_v = 2.95 eV, f = 0.80) and CT-type (E_v = 2.79 eV, f = 0.01) transitions. In the case of thieno-fused BODIPY, owing to the approach of the energy levels of the vertical S₂ and S₁ states, the energy equilibrium of the [1]CT-type state becomes lower than that of the [1]LE state, and Φ_f of the thieno-derivative may be substantially lower than Φ_f of the furo-derivative.

Synthesis and Functions of Oligomeric and Multidentate Dipyrrin Derivatives and their Complexes

The dipyrrin–metal complexes and especially the boron complex 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) have recently attracted considerable attention because of their interesting properties and possible applications. We have developed two unique and useful ways to extend versatility and usefulness of the dipyrrin complexes. The first one is the linear and macrocyclic oligomerization of the BODIPY units. These arrangements of the B–F moieties of the oligomerized BODIPY units provide sophisticated functions, such as unique recognition ability toward cationic guest, associated with changes in the photophysical properties by utilizing unprecedented interactions between the B–F and a cationic species. The second one is introduction of additional ligating moieties into the dipyrrin skeleton. The multidentate N2Ox dipyrrin ligands thus obtained form a variety of complexes with 13 and 14 group elements, which are difficult to synthesize using the original N2 dipyrrin derivatives. Interestingly, these unique complexes exhibit novel structures, properties, and functions such as guest recognition, stimuli-responsive structural conversion, switching of the optical properties, excellent stability of the neutral radicals, etc. We believe that these multifunctional dipyrrin complexes will advance the basic chemistry of the dipyrrin complexes and develop their applications in the materials and medicinal chemistry fields.

1 Introduction

2 Linear Oligomers of Boron–Dipyrrin Complexes

3 Cyclic Oligomers of Boron–Dipyrrin Complexes

4 A Cyclic Oligomer of Zinc–Dipyrrin Complexes

5 Group 13 Element Complexes of N2Ox Dipyrrins

6 Chiral N2 and N2Ox Dipyrrin Complexes

7 Group 14 Element Complexes of N2O2 Dipyrrins

8 Other N2O2 Dipyrrin Complexes with Unique Properties and Functions

9 Conclusion

Development of alkyne-BODIPYs as viscosity sensitive fluorescent probes for enumeration of bacterial cells

We report a series of alkyne-functionalized meso-aryl boron dipyrrin (BODIPY) molecular rotors sensitive to viscosity. The planar and twisted conformation within the molecular structure decides the viscosity-dependent behavior. The variations in fluorescence lifetime and intensity were appreciable to the local viscosity. Hence, the dye has been successfully employed in the enumeration of microbes by considering the proportionate fluorescence intensity of the BODIPYs as an index of the number of cells per mL. With increasing cells per mL, the viscosity of the bacterial solution is increased. Consequently, the fluorescence intensity of the sample containing BODIPY tends to increase due to the restricted rotation in the viscous medium. The BODIPY probe offers high sensitivity and is easier than other conventional techniques of colony-forming unit (CFU) determination. The theoretical studies indicate that intramolecular charge transfer is responsible for the enhanced fluorescence intensity in a highly viscous solvent.

The effect of structural heterogeneity upon the microviscosity of ionic liquids

The behaviour of two molecular rotors, one charged - 3,3'-diethylthiacarbocyanine iodide (Cy3) and one neutral - 8-[4-decyloxyphenyl]-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY-C10), have been studied in various ionic liquids. The fluorescent decay lifetime has been used to elucidate the structure of the immediate region around the rotor. The neutral BODIPY-C10 was found to prefer the non-polar alkyl chain environment, leading to two trends in the lifetime of the dye: one when it was fully partitioned into the non-polar domain, and one when it also sampled polar moieties. The positively charged Cy3 dye showed a complex relationship between the bulk viscosity of the ionic liquid and lifetime of the molecular rotor. This was attributed to a combination of polarity related spectral changes, changes in anion cages around the dye, and temperature dependent fluorescent lifetimes alongside the dependence of the rotor upon the viscosity.

Electrochemical Switching of a Fluorescent Molecular Rotor Embedded within a Bistable Rotaxane

We report how the nanoconfined environment, introduced by the mechanical bonds within an electrochemically switchable bistable [2]rotaxane, controls the rotation of a fluorescent molecular rotor, namely, an 8-phenyl-substituted boron dipyrromethene (BODIPY). The electrochemical switching of the bistable [2]rotaxane induces changes in the ground-state coconformation and in the corresponding excited-state properties of the BODIPY rotor. In the starting redox state, when no external potential is applied, the cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) ring component encircles the tetrathiafulvalene (TTF) unit on the dumbbell component, leaving the BODIPY rotor unhindered and exhibiting low fluorescence. Upon oxidation of the TTF unit to a TTF²⁺ dication, the CBPQT⁴⁺ ring is forced toward the molecular rotor, leading to an increased energy barrier for the excited state to rotate the rotor into the state with a high nonradiative rate constant, resulting in an overall 3.4-fold fluorescence enhancement. On the other hand, when the solvent polarity is high enough to stabilize the excited charge-transfer state between the BODIPY rotor and the CBPQT⁴⁺ ring, movement of the ring toward the BODIPY rotor produces an unexpectedly strong fluorescence signal decrease as the result of photoinduced electron transfer from the BODIPY rotor to the CBPQT⁴⁺ ring. The nanoconfinement effect introduced by mechanical bonding can effectively lead to modulation of the physicochemical properties as observed in this bistable [2]rotaxane. On account of the straightforward synthetic strategy and the facile modulation of switchable electrochromic behavior, our approach could pave the way for the development of new stimuli-responsive materials based on mechanically interlocked molecules for future electro-optical applications, such as sensors, molecular memories, and molecular logic gates.

Synthesis and investigation of BODIPYs with restricted meso-8-aryl rotation

Three BODIPYs bearing 1,3,5,7-tetramethyl substituents and a meso-8-aryl group were synthesized and investigated, both experimentally and computationally. The presence of the 1,7-methyl groups and of ortho-substituents on the meso-8-aryl ring prevent free rotation of the meso-8-aryl group, resulting in high fluorescence quantum yields. Substitution at the 2,6-positions of these BODIPYs with chlorine atoms causes pronounced red-shifted absorptions and emissions, and in the case of 2,6-dichloro-1,3,5,7-tetramethyl-8-(2,4,6-triphenylphenyl)-BODIPY 2c increases its fluorescence quantum yields to 0.93 in dichloromethane and 0.98 in toluene. The X-ray structure of 1,3,5,7-tetramethyl-8-(2,4,6-triphenylphenyl)-BODIPY shows increased deviation from planarity and smaller dihedral angle of the meso-8-aryl group compared with the meso-8-phenyl- and meso-8-mesityl-BODIPY analogs. The presence of 2,6-chlorine atoms was found to not significantly affect the rotational barriers of the meso-8-aryl-groups.

Temperature- and Structure-Dependent Optical Properties and Photophysics of BODIPY Dyes

We report on the temperature- and structural-dependent optical properties and photophysics of a set of boron dipyrromethene (BODIPY) dyes with different substitution patterns of their meso-aryl subunit. Single-crystal X-ray diffraction analysis of the compounds enabled a classification of the dyes into a sterically hindered and a unhindered group. The steric hindrance refers to a blocked rotational motion of the aryl subunit around the bond connecting this moiety to the meso-position of the BODIPY core. The energy barriers related to this rotation were simulated by DFT calculations. As follows from the relatively low rotational barrier calculated to about 17 kcal/mol, a free rotation is only possible for sterically unhindered compounds. Rotational barriers of more than 40 kcal/mol determined for the sterically hindered compounds suggest an effective freezing of the rotational motion in these molecules. With the aid of temperature-dependent spectroscopic measurements, we could show that the ability to rotate directly affects the optical properties of our set of BODIPY dyes. This accounts for the strong temperature dependence of the fluorescence of the sterically unhindered compounds which show a drastic decrease in fluorescence quantum yield and a significant shortening in fluorescence lifetime upon heating. The optical properties of the sterically hindered compounds, however, are barely affected by temperature. Our results suggest a nonradiative deactivation of the first excited singlet state of the sterically unhindered compounds caused by a conical intersection of the potential energy surfaces of the ground and first excited state which is accessible by rotation of the meso-subunit. This is in good agreement with previously reported deactivation mechanisms. In addition, our results suggest the presence of a second nonradiative depopulation pathway of the first excited singlet state which is particularly relevant for the sterically hindered compounds.

Ready Access to Molecular Rotors Based on Boron Dipyrromethene Dyes-Coumarin Dyads Featuring Broadband Absorption

Herein we report on a straightforward access method for boron dipyrromethene dyes (BODIPYs)-coumarin hybrids linked through their respective 8- and 6- positions, with wide functionalization of the coumarin fragment, using salicylaldehyde as a versatile building block. The computationally-assisted photophysical study unveils broadband absorption upon proper functionalization of the coumarin, as well as the key role of the conformational freedom of the coumarin appended at the meso position of the BODIPY. Such free motion almost suppresses the fluorescence signal, but enables us to apply these dyads as molecular rotors to monitor the surrounding microviscosity.

Two π-Electrons Make the Difference: From BODIPY to BODIIM Switchable Fluorescent Dyes

(aza-)BODIPY dyes (boron dipyrromethene dyes) are well-established fluorophores due to their large quantum yields, stability, and diversity, which led to promising applications including imaging techniques, sensors, organic (opto)electronic materials, or biomedical applications. Although the control of the optical properties in (aza-)BODIPY dyes by peripheral functional groups is well studied, we herein present a novel approach to modify the 12 π-electron core of the dipyrromethene scaffold. The replacement of two carbon atoms in the β-position of a BODIPY dye by two nitrogen atoms afforded a 14 π-electron system, which was termed BODIIM (boron diimidazolylmethene) in systematic analogy to the BODIPY dyes. Remarkably, the BODIIM dye was obtained with a BH2 -rigidifying entity, which is currently elusive and highly sought after for the BODIPY dye class. DFT-Calculations confirm the [12+2] π-electron relationship between BODIPY and BODIIM and reveal a strong shape correlation between LUMO in the BODIPY and the HOMO of the BODIIM. The modification of the π-system leads to a dramatic shift of the optical properties, of which the fluorescent emission is most noteworthy and occurs at much larger Stokes shift, that is, ≈500 cm-1 in BODIPY versus >4170 cm-1 in BODIIM system in all solvents investigated. Nucleophilic reactivity was found at the meso-carbon atom in the formation of stable borane adducts with a significant shift of the fluorescent emission, and this behavior contrasts the reactivity of conventional BODIPY systems. In addition, the reverse decomplexation of the borane adducts was demonstrated in reactions with a representative N-heterocyclic carbene to retain the strongly fluorescent BODIIM compound, which suggests applications as fully reversible fluorescent switch.

BODIPY-amino acid conjugates – tuning the optical response with a meso-heteroatom

The presence of a heteroatom at the meso-position of BODIPY significantly influences the π-cloud of the main chromophore, modifying the final optical properties.

Turning weak emitters into outstanding luminescent materials using rigid host media

The incorporation into rigid silica host structures leads successfully to a significant luminescence enhancement of two zinc(ii) dipyrrins, known to be weak emitters in solution. One of these complexes shows a fluorescence efficiency of 55% and prolonged photo-stability once entrapped in silica, demonstrating high potential for applications in energy conversion.

Through incorporation into host–guest silica structures, typically poorly emissive zinc(ii) dipyrrins exhibit up to 100-fold fluorescence enhancement and prolonged photostability.