Photophysical Studies of α,ω-Dicyano-oligothiophenes NC(C4H2S)nCN (n = 1−6)

Solvent-Driven Self-Organization of Meso-Substituted Porphyrins: Morphological Analysis from Fluorescence Lifetime Imaging Microscopy

A morphological analysis of different thin films of meso-tetra-p-(di-p-phenylamino)phenylporphyrin, H₂T(TPA)₄P, was made by fluorescence lifetime imaging microscopy (FLIM) and scanning electron microscopy (SEM). A comprehensive study of H₂T(TPA)₄P was undertaken through UV/vis absorption and fluorescence techniques in different solvents, solvent mixtures and in thin films. In solution, occurrence of intramolecular energy transfer from the triphenylamine (TPA) moieties to the porphyrin core, with quenching efficiencies in the order of 94-97%, is observed. The energy transfer rate constants are determined assuming Förster's dipole-dipole and Dexter's electron exchange mechanisms. In drop-cast-prepared thin films, from samples with different solvent mixtures, the photoluminescence (PL) quantum yield (Φ_PL) decreases ∼1 order of magnitude compared to the solution behavior. FLIM and SEM experiments showed the self-organization and morphology of H₂T(TPA)₄P in thin films to be highly dependent on the solvent mixture used to prepare the film. In chloroform, the solvent's evaporation results in the formation of elongated and overlapped microrod structures. Introduction of a cosolvent, namely, a polar cosolvent, promotes changes in the morphology of the self-assembled structures, with the formation of three-dimensional spherical structures and hollow spheres. H₂T(TPA)₄P dispersed in a polymer matrix shows enhanced Φ_PL values when compared to the drop-cast films. FLIM images showed coexistence of three different states or domains: aggregated, interface, and nonaggregated or less-aggregated states. This work highlights the importance of FLIM in the morphological characterization of heterogeneous films, together with the photophysical characterization of nano- and microdomains.

Electron‐Rich EDOT Linkers in Tetracationic bis‐Triarylborane Chromophores: Influence on Water Stability, Biomacromolecule Sensing, and Photoinduced Cytotoxicity

Three novel tetracationic bis‐triarylboranes with 3,4‐ethylenedioxythiophene (EDOT) linkers, and their neutral precursors, showed significant red‐shifted absorption and emission compared to their thiophene‐containing analogues, with one of the EDOT‐derivatives emitting in the NIR region. Only the EDOT‐linked trixylylborane tetracation was stable in aqueous solution, indicating that direct attachment of a thiophene or even 3‐methylthiophene to the boron atom is insufficient to provide hydrolytic stability in aqueous solution. Further comparative analysis of the EDOT‐linked trixylylborane tetracation and its bis‐thiophene analogue revealed efficient photo‐induced singlet oxygen production, with the consequent biological implications. Thus, both analogues bind strongly to ds‐DNA and BSA, very efficiently enter living human cells, accumulate in several different cytoplasmic organelles with no toxic effect but, under intense visible light irradiation, they exhibit almost instantaneous and very strong cytotoxic effects, presumably attributed to singlet oxygen production. Thus, both compounds are intriguing theranostic agents, whose intracellular and probably intra‐tissue location can be monitored by strong fluorescence, allowing switching on of the strong bioactivity by well‐focused visible light.

Aggregation-Induced Emission: From Small Molecules to Polymers-Historical Background, Mechanisms and Photophysics

The enhancement of photoluminescence through formation of molecular aggregates in organic oligomers and conjugated organic polymers is reviewed. A historical contextualization of aggregation-induced emission (AIE) phenomena is presented. This includes the loose bolt or free rotor effect and J-aggregation phenomena, and discusses their characteristic features, including structures and mechanisms. The basis of both effects is examined in key molecules, with a particular emphasis on the AIE effect occurring in conjugated organic polymers with a polythiophene (PT) skeleton with triphenylethylene (TPE) units. Rigidification of the excited state structure is one of the defining conditions required to obtain AIE, and thus, by changing from a flexible ground state to rigid (quinoidal-like) structures, oligo and PTs are among the most promising emerging molecules alongside with the more extensively used TPE derivatives. Molecular structures moving away from the domination of aggregation-caused quenching to AIE are presented. Future perspectives for the rational design of AIEgen structures are discussed.

Higher activation barriers can lift exothermic rate restrictions in electron transfer and enable faster reactions

Electron transfer reactions are arguably the simplest chemical reactions but they have not yet ceased to intrigue chemists. Charge-separation and charge-recombination reactions are at the core of life-sustaining processes, molecular electronics and solar cells. Intramolecular electron donor-acceptor systems capture the essential features of these reactions and enable their fundamental understanding. Here, we report intramolecular electron transfers covering a range of 100 kcal mol^-1 in exothermicities that show an increase, then a decrease, and finally an increase in rates with the driving force of the reactions. Concomitantly, apparent activation energies change from positive, to negative and finally to positive. Reactions with positive activation energies are found to be faster than analogous reactions with negative effective activation energies. The increase of the reorganization energy with the driving force of the reactions can explain the peculiar free-energy relationship observed in this work.

Advances on photodynamic therapy of melanoma through novel ring-fused 5,15-diphenylchlorins

The synthesis, photophysical behaviour and photosensitization ability of novel 4,5,6,7-tetrahydropyrazolo[1,5-a]pyridine-fused 5,15-diphenylchlorins against melanoma cells are described. All studied chlorins were found to be extremely active against melanoma cell lines A375 showing IC₅₀ values below 20 nM. Furthermore, a dihydroxymethyl diphenylchlorin was identified as an excellent candidate to allow modulating of different types of cell death, apoptosis vs. necrosis, by varying its concentration. This can be explored as a tool to improve the effectiveness of PDT since inflammatory response resulting from necrotic cell death after PDT can activate the antitumor immune response with implications also regarding the vascular damage. This feature combined with very low cytotoxicity against human melanoma cells in the absence of light activation and against human fibroblast HFF-1 cells makes this chlorin a candidate of choice as a photosensitizer for PDT. A comprehensive photophysical investigation including the determination of quantum yields for fluorescence, singlet oxygen sensitization and internal conversion, lifetimes and rate constants of all the excited state deactivation processes has been undertaken.

Thiophene-Based Organic Semiconductors

Thiophene-based π-conjugated organic small molecules and polymers are the research subject of significant current interest owing to their potential use as organic semiconductors in material chemistry. Despite simple and similar molecular structures, the hitherto reported properties of thiophene-based organic semiconductors are rather diverse. Design of high performance organic semiconducting materials requires a thorough understanding of inter- and intra-molecular interactions, solid-state packing, and the influence of both factors on the charge carrier transport. In this chapter, thiophene-based organic semiconductors, which are classified in terms of their chemical structures and their structure-property relationships, are addressed for the potential applications as organic photovoltaics (OPVs), organic field-effect transistors (OFETs) and organic light emitting diodes (OLEDs).

An Indigo Carmine-Based Hybrid Nanocomposite with Supramolecular Control of Dye Aggregation and Photobehavior

Zn-Al layered double hydroxides (LDHs) containing solely indigo carmine (IC) or 1-hexanesulfonate (HS) anions, or a mixture of the two with different HS/IC molar ratios, were prepared by the direct synthesis method and characterized by various techniques. Hydrotalcite-type phases were obtained with basal spacings of 17.6 Å for the LDH intercalated by IC (IC-LDH) and 18.2-18.3 Å for the other materials containing HS. From the basal spacing for IC-LDH and UV/Vis spectroscopic data, it is proposed that the dye molecules assemble within the interlayer galleries to form a J-type stacking arrangement. A comprehensive electronic spectral and photophysical study was undertaken for IC in solution and all materials, aiming to obtain a detailed characterization of the host-guest and guest-guest interactions. In solution (the solvent surrounded "isolated" molecule), IC presents a fast excited state proton transfer with rate constants of ∼1.2-1.4×10(11)  s(-1) , which is linked to the very efficient radiationless deactivation channel. In the solid state it is shown that incorporation of IC within the LDH decreases the level of aggregation, and that further addition of HS induces the appearance of isolated IC units within the LDH galleries. The indigo carmine-based nanocomposites reported constitute a step forward in the design of hybrid materials with tunable properties.

Fluorescent thiophene-based materials and their outlook for emissive applications

An overview of fluorescent thiophene-based materials and their applications, highlighting in particular the various methods employed to achieve highly emissive materials.

The effect of polyaromatic hydrocarbons on the spectral and photophysical properties of diaryl-pyrrole derivatives: an experimental and theoretical study

A new class of diaryl-pyrrole derivatives of the polyaromatic hydrocarbons (PAH) benzene, naphthalene, anthracene and pyrene were synthesized in a multicomponent reaction under microwave irradiation and studied in solution at room (293 K) and low (77 K) temperature. The study includes a complete spectroscopic evaluation (singlet-singlet and triplet-triplet absorption, fluorescence and phosphorescence spectra) as well as photophysical evaluation (fluorescence, phosphorescence and triplet lifetimes together with fluorescence and triplet occupation and singlet oxygen sensitization quantum yields). From the above evaluation, a complete set of deactivation rate constants (kF, kIC and kISC) could be obtained. The study was further complemented with TDDFT calculations. It is shown that, with the exception of the anthracene derivative, the diaryl-pyrrole moiety strongly influences the spectral and photophysical properties of the PAH and that with the exception of the benzene derivative, the excited state internal conversion deactivation channel of the diaryl-pyrrole derivatives is higher than that of the PAH counterparts.

The effect of diketopyrrolopyrrole (DPP) group inclusion in p-cyanophenyl end-capped oligothiophene used as a dopant in P3HT:PCBM BHJ solar cells

Synthesis and properties of DPP-(2TPhCN)2 dopant molecules, which absorb light and transfer energy to PC₆₀BM, increasing the BHJ cell efficiency.

Computational engineering of low bandgap copolymers

We present a conceptual approach to low bandgap copolymers, in which we clarify the physical parameters which control the optical bandgap, develop a fundamental understanding of bandgap tuning, unify the terminology, and outline the minimum requirements for accurate prediction of polymer bandgaps from those of finite length oligomers via extrapolation. We then test the predictive power of several popular hybrid and long-range corrected (LC) DFT functionals when applied to this task by careful comparison to experimental studies of homo- and co-oligomer series. These tests identify offset-corrected M06HF, with 100% HF exchange, as a useful alternative to the poor performance of tested hybrid and LC functionals with lower fractions of HF exchange (B3LYP, CAM-B3LYP, optimally-tuned LC-BLYP, BHLYP), which all significantly overestimate changes in bandgap as a function of system size.

Synthesis and characterization of the ground and excited states of tripodal-like oligothienyl-imidazoles

Six new thiophene oligomers, here designated as tripodal-like oligothienyl-imidazoles, were synthesized and have been investigated in ethanol solution at room and low temperature. The oligomers bear a common core where two or more thiophenes are linked to one or more imidazole units that further links through its alpha-position to a different number of incremental thiophene units. The study involves a comprehensive spectral and photophysical investigation where the properties of the singlet and triplet states have been investigated regarding absorption, fluorescence and phosphorescence, transient triplet-triplet absorption together with all relevant quantum yields (fluorescence, phi(F), internal conversion, phi(IC), intersystem crossing, phi(T,) and singlet oxygen, phi(Delta)) and lifetimes. In addition, density functional theory quantum chemical calculations were performed to gain a detailed understanding of the molecular geometry and optical properties of the investigated oligomers. From the overall data, the radiative (k(F)) and radiationless (k(NR), k(IC), and k(ISC)) rate constants have been determined and it is shown that, in contrast with the parent oligothiophenes, the radiative competes with the radiationless deactivation channels. The results show that, by comparison with the oligothiophene counterparts, there is an augment of the relative contributions of the internal conversion and fluorescence processes relative to the S(1)~~-->T(1) intersystem crossing. Phosphosphorescence emission was found for the simplest member of the investigated compounds with a low quantum yield (phi(Ph) = 0.009) and a lifetime of 8 micros. The data also show that the introduction of a 4,5-dithienyl-imidazole moiety in a bi- or terthiophene oligomer results in, respectively, a 20-fold and a 3-fold increase of the fluorescence quantum yield relative to their oligothiophene counterparts. The synergy of the structural and photophysical properties, combined with the exceptional thermal stabilities, opens new perspectives related to the copolymerization of oligothiophenes with thienyl-imidazole units with potential application as organic light emitting devices.

Aqueous solution behavior of anionic fluorene-co-thiophene-based conjugated polyelectrolytes

Two anionic fluorene-thiophene alternating copolymers, poly[9,9-bis(4-sulfonylbutoxyphenyl)fluorene-2,7-diyl-2,5-thienylene] (PBS-PFT) and poly[9,9-bis(4-sulfonylbutoxyphenyl)fluorene-2,7-diyl-2,2'-bithiophene-5,5'-diyl] (PBS-PF2T), have been synthesized and their solution behaviors in water studied by UV-vis absorption spectroscopy, fluorescence, and electrical conductivity and compared with that of the previously studied conjugated polyelectrolyte (CPE) poly[9,9-bis(4-sulfonylbutoxyphenyl)fluorene-2,7-diyl-1,4-phenylene] (PBS-PFP). These conjugated polymers do not form solutions at the molecular level in water but instead form clusters. Information on the structure of these clusters for PBS-PF2T comes from small-angle X-ray and neutron scattering. The relative ease of dispersing the copolymers in water increases with an increase in the number of thiophene rings in these alternating copolymers. Semiempirical calculations on the structure suggest that this results from bending of the chains and increased conformational flexibility, decreasing interchain interactions. These CPEs can be dissolved in water at the molecular level using the nonionic surfactants n-dodecylpentaoxyethylene glycol ether (C12E5) or Triton X-100 to obtain systems with increased photoluminescence quantum yield and increased electrical conductivity that can be solution-processed for potential applications as components of sensory or optoelectronic devices.

Spectral and photophysical studies on cruciform oligothiophenes in solution and the solid state

The photophysical and spectroscopic properties of a new class of oligothiophene derivatives, designated as cruciform oligomers, have been investigated in solution (room and low temperature) and in the solid state (as thin films in Zeonex matrixes). The study comprises absorption, emission, and triplet-triplet absorption spectra, together with quantitative measurements of quantum yields (fluorescence, intersystem crossing, internal conversion, and singlet oxygen formation) and lifetimes. The overall data allow the determination of the rate constants for all decay processes. From these, several conclusions are drawn. First, in solution, the main deactivation channels for the compounds are the radiationless processes: S(1) --> S(0) internal conversion and S(1) --> T(1) intersystem crossing. Second, in general, in the solid state, the fluorescence quantum yields decrease relative to solution. A comparison is made with the analogous linear alpha-oligothiophenes, revealing a lower fluorescence quantum efficiency and, in contrast to the normal oligothiophenes, that internal conversion is an important channel for the deactivation of the singlet excited state. Replacement of thiophene by 1,4-phenylene units in the longer-sized cruciform oligomer increases the fluorescence efficiency. The highly efficient generation of singlet oxygen through energy transfer from the triplet state (S(Delta) approximately 1) provides support for the measured intersystem crossing quantum yields and suggests that reaction with this may be an important pathway to consider for degradation of devices produced with these compounds.

Intramolecular triplet energy transfer via higher triplet excited state during stepwise two-color two-laser irradiation

We studied the energy transfer processes in the molecular array consisting of pyrene (Py), biphenyl (Ph2), and bisphthalimidethiophene (ImT), (Py-Ph2)2-ImT, during two-color two-laser flash photolysis (2-LFP). The first laser irradiation predominantly generates ImT in the lowest triplet excited state (ImT(T1)) because of the efficient singlet energy transfer from Py in the lowest singlet excited state to ImT and, then, intersystem crossing of ImT. ImT(T1) was excited to the higher triplet excited state (Tn) with the second laser irradiation. Then, the triplet energy was rapidly transferred to Py via a two-step triplet energy transfer (TET) process through Ph2. The efficient generation of Py(T1) was suggested from the nanosecond-picosecond 2-LFP. The back-TET from Py(T1) to ImT was observed for several tens of microseconds after the second laser irradiation. The estimated intramolecular TET rate from Py(T1) to ImT was as slow as 3.1 x 104 s-1. Hence, long-lived Py(T1) was selectively and efficiently produced during the 2-LFP.

Spectral and Photophysical Characterization of Donor-π-Acceptor Arylthienyl- and Bithienyl-Benzothiazole Derivatives in Solution and Solid State

A comprehensive study has been made in solution at room temperature (293 K), low temperature (77 K), and in thin films (Zeonex matrixes) of the spectral and photophysical properties of six arylthienyl- and bithienyl-benzothiazole derivatives functionalized with different donor groups. Similar experiments have been carried out with two related precursors (containing the arylthienyl and aryl-bithienyl conjugated systems), and results are compared. Singlet-singlet and triplet-triplet absorption spectra, emission spectra together with lifetimes and quantum yields have been obtained, and from these data the rates for all the radiative and nonradiative processes determined, providing information on the dominant decay processes. The arylthienyl-benzothiazole derivatives show high fluorescence quantum yields (phi(F)) with negligible internal conversion (phi(IC)), whereas the bithienyl-benzothiazoles display lower but still significant phi(F) values, but now radiationless processes (phi(IC) and phi(ISC)) are competitive. A comparison with the analogous oligothiophenes is made. Singlet oxygen yields were also determined and the triplet energy transfer to (3)O2 to produce (1)O2 was found to be highly efficient with values of S(Delta)(= phi(Delta)/phi(T)) varying from 0.4 to 1.