Theoretical Studies of the Photochemical Dynamics of Acetylacetone: Isomerzation, Dissociation, and Dehydration Reactions

WFOT: A Wave Function Overlap Tool between Single- and Multi-Reference Electronic Structure Methods for Spectroscopy Simulation

We report the development of a novel diagnostic tool, named wave function overlap tool (WFOT), designed to evaluate the overlap between wave functions computed at single-reference [i.e., time-dependent density functional theory or configuration interaction singles (CIS)] and multireference (i.e., CASSCF/CASPT2) electronic structure levels of theory. It relies on truncating the single- and multireference WFs to CIS-like expansions spanning the same configurational space and maximizing the molecular orbital overlap by means of a unitary transformation. To demonstrate the functionality of the tool, we calculate the transient spectrum of acetylacetone by evaluating excited state absorption signals with multireference quality on top of single-reference on-the-fly dynamics simulations. Semiautomatic spectra generation is facilitated by interfacing the tool with the COBRAMM package, which also allows one to use WFOT with several quantum chemistry codes such as Gaussian, NWChem, and OpenMolcas. Other exciting possibilities for the utilization of the code beyond the simulation of transient absorption spectroscopy are eventually discussed.

Acetylacetone Photolysis at 280 nm Studied by Velocity-Map Ion Imaging

The photolysis of acetylacetone (AcAc) has been studied using velocity-map ion imaging with pulsed nanosecond lasers. The enolone tautomer of AcAc (CH3C(O)CH═C(OH)CH3) was excited in the strong UV absorption band by UV pulses at 280 nm, preparing the S2(ππ*) state, and products were probed after a short time delay by single-photon VUV ionization at 118.2 nm. Two-color UV + VUV time-of-flight mass spectra show enhancement of fragments at m/z = 15, 42, 43, 58, and 85 at the lowest UV pulse energies and depletion of the parent ion at m/z = 100. Ion images of the five major fragments are all isotropic, indicating dissociation lifetimes that are long on the timescale of molecular rotation but shorter than the laser pulse duration (<6 ns). The m/z = 15 and 85 fragments have identical momentum distributions with moderate translational energy release, suggesting that they are formed as a neutral product pair and likely via a Norrish type I dissociation of the enolone to form CH3 + C(O)CH═C(OH)CH3 over a barrier on a triplet surface. The m/z = 43 fragment may be tentatively assigned to the alternative Norrish type I pathway that produces CH3CO + CH2C(O)CH3 on S0 following phototautomerization to the diketone, although alternative mechanisms involving dissociative ionization of a larger primary photoproduct cannot be conclusively ruled out. The m/z = 42 and 58 fragments are not momentum-matched and consequently are not formed as a neutral pair via a unimolecular dissociation pathway on S0. They also likely originate from the dissociative ionization of primary photofragments. RRKM calculations suggest that unimolecular dissociation pathways that lead to molecular products on S0 are generally slow, implying an upper-limit lifetime of <46 ns after excitation at 280 nm. Time-dependent measurements suggest that the observed photofragments likely do not arise from dissociative ionization of energized AcAc S0*.

UV photoreaction pathways of acetylacetaldehyde trapped in cryogenic matrices

The broadband UV photochemistry kinetics of acetylacetaldehyde, the hybrid form between malonaldehyde and acetylacetone (the two other most simple molecules exhibiting an intramolecular proton transfer), trapped in four cryogenic matrices, neon, nitrogen, argon, and xenon, has been followed by FTIR and UV spectroscopy. After deposition, only the two chelated forms are observed while they isomerize upon UV irradiation toward nonchelated species. From previous UV irradiation effects, we have already identified several nonchelated isomers, capable, in turn, of isomerizing and fragmenting; even fragmentation seems to be most unlikely due to cryogenic cages confinement. Based on these findings, we have attempted an approach to understand the reaction path of electronic relaxation. Indeed, we have demonstrated, in previous studies, that in the case of malonaldehyde, this electronic relaxation pathway proceeds through singlet states while it proceeds through triplet ones in the case of acetylacetone. We observed CO and CO₂ formations when photochemistry is almost observed among nonchelated forms, i.e., when the parent molecule is almost totally consumed. In order to identify a triplet state transition, we have tried to observe a "heavy atom effect" by increasing the weight of the matrix gas, from Ne to Xe, and to quench the T₁ state by doping the matrices with O₂. It appears that, as in the case of acetylacetone, it is the nonchelated forms that fragment. It also appears that these fragmentations certainly take place in the T₁ triplet state and originate in an Π* ← n transition.

Ultrafast X-ray Spectroscopy of Intersystem Crossing in Hexafluoroacetylacetone: Chromophore Photophysics and Spectral Changes in the Face of Electron-Withdrawing Groups

Intersystem crossings between singlet and triplet states represent a crucial relaxation pathway in photochemical processes. Herein, we probe the intersystem crossing in hexafluoro-acetylacetone with ultrafast X-ray transient absorption spectroscopy at the carbon K-edge. We observe the excited state dynamics following excitation with 266 nm UV light to the ¹ππ* (S₂) state with element and site-specificity using a broadband soft X-ray pulse produced by high harmonic generation. These results are compared to X-ray spectra computed from orbital optimized density functional theory methods. It is found that the electron-withdrawing fluorine atoms decongest the X-ray absorption spectrum by enhancing separation between features originating from different carbon atoms. This facilitates the elucidation of structural and electronic dynamics at the chromophore. The evolution of the core-to-valence resonances at the carbon K-edge reveals an ultrafast population transfer between the ¹nπ* (S₁) and ³ππ* (T₁) states on a 1.6 ± 0.4 ps time scale, which is similar to the 1.5 ps time scale earlier observed for acetylacetone [ J. Am. Chem. Soc. 2017, 139, 16576-16583, DOI: 10.1021/jacs.7b07532]. It therefore appears that terminal fluorination has little influence on the intersystem crossing rate of the acetylacetone chromophore. In addition, the significant role of hydrogen-bond opened and twisted rotational isomers is elucidated in the excited state dynamics by comparison of the experimental transient X-ray spectra with theory.

In situ nanopores enrichment of Mesh-like palladium nanoplates for bifunctional fuel cell reactions: A joint etching strategy

Two-dimensional (2D) nanomaterials with nanopore display an enhancement effect on electrocatalysis behavior, whereas the nanopore engineering for 2D nanocatalysts remains an insurmountable challenge. We advance the synthesis of multilayer Pd nanoplates (Pd NPs) and two types of meshy nanoplates (Pd LMNPs/MNPs) with escalating nanopores from none and sparse to porous. Specially, an in situ nanopore enrichment on these Pd nanoplates hinges on a joint etching strategy with integrated manipulation of reaction kinetics. The optimized Pd MNPs exhibit exceptional oxygen reduction reaction performance, owing to the enhanced intermediates protonation on Pd site neighboring nanopore, which has been elucidated by density functional theory calculations. In addition, Pd MNPs also deliver excellent performances in fuel cell anodic reactions, including ethanol oxidation reaction and formic acid oxidation reaction. This study highlights a new strategy for in situ nanopores engineering, providing a prospect for designing superior nanocatalysts.

Key structural features that determine the selectivity of UV/acetylacetone for the degradation of aromatic pollutants when compared to UV/H2O2

Acetylacetone (AA) has proven to be a potent photo-activator for the decolorization of dyes. However, there is very limited information on the quantitative structure-activity relationship (QSAR) and the mechanisms of dye degradation by UV/AA. Herein, the photolysis of 65 aromatic compounds (dyes and dye precursors) was investigated at three pH values (4.0, 6.0, 9.0) by UV/AA and UV/H₂O₂. The obtained pseudo-first-order photodegradation rate constants (k₁) were processed using statistical analysis. The correlation between the k₁ values and the number of photons absorbed by AA, together with the observed pH effect, suggested that the protonated enol structure of AA plays a crucial role in the photodecolorization of dyes. According to quantum chemical computation, photo-induced direct electron transfer between the excited state of AA and the dye was the main mechanism in the UV/AA process. QSAR models demonstrated that the molecular size and stability were the key factors that determined the efficiency of UV/H₂O₂ for dye degradation. Statistically, the UV/AA process was target-selective and suffered less from the inner filter effect, which made it more effective than the UV/H₂O₂ process for dye degradation. The selectivity of the UV/AA process was mainly embodied in the substituent effects: dyes with hydroxyl groups in conjugated systems decomposed faster than those with nitro-substitution or ortho-substituted sulfonate groups. The results can be used for the selection of appropriate photochemical approaches for the treatment of dye-contaminated water.

Role of complexation in the photochemical reduction of chromate by acetylacetone

Organic ligands can alter the redox behavior of metal species through the generation of metal-ligand complexes. Photo-induced complexation between ligands and metals is an important, but under-appreciated, aspect of process. Acetylacetone (AA) is a good chelating agent due to keto-enol tautomerization. In the presence of AA, photoreduction of Cr(VI) is accelerated; however, it is unclear exactly how complexation is involved in UV/AA mediated Cr(VI) reduction. On the basis of spectral and kinetic analyses, this study shows that the formation of {Cr(VI)-AA}* complexes is the main mechanism of Cr(VI) reduction by UV/AA. Evidence for this includes (1) the formation rate constant of Cr(III)-AA complexes in the UV system was 2-3 orders of magnitude greater than that in the thermal system; (2) there was a linear relationship between the photons absorbed by AA and the reduction rate constants of Cr(VI); and (3) the reaction appeared initially zero-order in Cr(VI) and turned to first-order as the pool of available Cr(VI) ran out. The results presented here are not only important for the better understanding of the complexation effects in the reduction of Cr(VI), but also crucial for the possible application of the UV/AA process in many other scenarios.

UV Photochemistry of Acetylacetaldehyde Trapped in Cryogenic Matrices

The broad band UV photochemistry of acetylacetaldehyde, the hybrid form between malonaldehyde and acetylacetone (the two other most simple molecules exhibiting an intramolecular proton transfer), trapped in four cryogenic matrices, neon, nitrogen, argon, and xenon, has been studied by IRTF spectroscopy. These experimental results have been supported by B3LYP/6-311G++(2d,2p) calculations in order to get S₀ minima together with their harmonic frequencies. On those minima, we have also calculated their vibrationally resolved UV absorption spectra at the time-dependent DFT ωB97XD/6-311++G(2d,2p) level. After deposition, only the two chelated forms are observed while they isomerize upon UV irradiation toward nonchelated species. From UV irradiation effects we have identified several nonchelated isomers, capable, in turn, of isomerizing and fragmenting, even if this last phenomenon seems to be most unlikely due to cryogenic cages confinement. On the basis of these findings, we have attempted a first approach to the reaction path of electronic relaxation. It appeared that, as with acetylacetone, the path of electronic relaxation seems to involve triplet states.

Short-wavelength probes in time-resolved photoelectron spectroscopy: an extended view of the excited state dynamics in acetylacetone

Time-resolved photoelectron spectroscopy using a vacuum ultraviolet probe brings new insight to the excited state dynamics operating in acetylacetone.

UV and IR Photochemistries of Malonaldehyde Trapped in Cryogenic Matrices

UV and IR photochemistries of malonaldehyde, the simplest molecule exhibiting an intramolecular proton exchange, have been studied in four cryogenic matrices at 4.3 K, N₂, Ne, Ar, and Xe. Samples have been irradiated using a UV and IR OPO type tunable laser, and with a broad band UV mercury lamp. UV and IR spectra have been recorded and compared with theoretical calculations carried out at the SAC-CI/6-31++G(d,p) (UV transitions) and B3LYP/6-311++G(2d,2p) (IR spectra) levels of theory. After deposition, the intramolecularly H-bonded form is found exclusively, while several open forms are formed upon UV irradiation. These open forms show ability to interconvert upon UV irradiation too. Some of them are also able to isomerize upon selective IR irradiations. The whole set of results allowed us to identify seven isomers among the eight postulated. The photodynamics of the electronic relaxation of malonaldehyde have also been investigated. By following the decay or rise of suited specific vibrational bands in the IR spectra, and by comparing the results with an earlier study of the homologous acetylacetone, we deduced that the electronic relaxation of malonaldehyde proceeds through singlet states, most probably through a 3-fold conical intersection, as postulated from theoretical calculations. In contrast with acetylacetone, malonaldehyde does not show fragmentation after UV excitation.

Acetylacetone photodynamics at a seeded free-electron laser

The first steps in photochemical processes, such as photosynthesis or animal vision, involve changes in electronic and geometric structure on extremely short time scales. Time-resolved photoelectron spectroscopy is a natural way to measure such changes, but has been hindered hitherto by limitations of available pulsed light sources in the vacuum-ultraviolet and soft X-ray spectral region, which have insufficient resolution in time and energy simultaneously. The unique combination of intensity, energy resolution, and femtosecond pulse duration of the FERMI-seeded free-electron laser can now provide exceptionally detailed information on photoexcitation–deexcitation and fragmentation in pump-probe experiments on the 50-femtosecond time scale. For the prototypical system acetylacetone we report here electron spectra measured as a function of time delay with enough spectral and time resolution to follow several photoexcited species through well-characterized individual steps, interpreted using state-of-the-art static and dynamics calculations. These results open the way for investigations of photochemical processes in unprecedented detail.

The first steps in photochemical processes involve changes in electronic and geometric structure on extremely short timescales. Here, the authors report femtosecond dynamics in prototypical acetylacetone, by pump-probe photoexcitation-photoemission experiments and static and dynamics calculations.

Acetylacetone as an efficient electron shuttle for concerted redox conversion of arsenite and nitrate in the opposite direction

The redox conversion of arsenite and nitrate has direct effects on their potential environment risks. Due to the similar reduction potentials, there are few technologies that can simultaneously oxidize arsenite and reduce nitrate in one process. Here, we demonstrate that a diketone-mediated photochemical process could efficiently do this. A combined experimental and theoretical investigation was conducted to elucidate the mechanisms behind the redox conversion in the UV/acetylacetone (AA) process. Our key finding is that UV irradiation significantly changed the redox potential of AA. The excited AA, ³(AA)*, acted as a semiquinone radical-like electron shuttle. For arsenite oxidation, the efficiency of ³(AA)* was 1-2 orders of magnitude higher than those of quinone-type electron shuttles, whereas the consumption of AA was 2-4 orders of magnitude less than those of benzonquinones. The oxidation of arsenite and reduction of nitrate could be both accelerated when they existed together in UV/AA process. The results indicate that small diketones are some neglected but potent electron shuttles of great application potential in regulating aquatic redox reactions with the combination of UV irradiation.

Double deuterated acetylacetone in neon matrices: infrared spectroscopy, photoreactivity and the tunneling process

Open enol conformers of double deuterated acetylacetone are produced by UV and IR irradiation, allowing the analysis of the tunnelling effect between them.

A new insight into the photochemistry of avobenzone in gas phase and acetonitrile from ab initio calculations

Coupled cluster based calculations on the ground and excited states of avobenzone provide mechanistic understanding of formation of transient tautomers upon photoexcitation of the chelated enol form.

Iron in non-hydroxyl radical mediated photochemical processes for dye degradation: Catalyst or inhibitor?

The acetylacetone (AA) mediated photochemical process has been proven as an efficient approach for decoloration. For azo dyes, the UV/AA process was several to more than ten times more efficient than the UV/H2O2 process. Iron is one of the most common elements on the earth. It is well known that iron can improve the UV/H2O2 process through thermal Fenton and photo-Fenton reactions. What will be the role of iron in the UV/AA process? Could iron-AA complexes act as photocatalysts in environmental remediation? To answer these questions, the photo-degradation of an azo dye, Acid Orange 7 (AO7), was conducted under the variant combinations of AA with iron species in both ionic (Fe2+, Fe3+) and complex (Fe(AA)3) forms. The pseudo-first-order decoloration rate constants of AO7 in these photochemical processes followed such an order: UV/Fe(II)/AA<UV/Fe(III)/AA<UV/Fe(AA)3<UV/AA. The results demonstrate that iron species, in either ionic or complex form, acts as an inhibitor rather than a catalyst in the UV/AA process. Based on spectroscopic analysis, the inner filter effect of iron and the competition between Fe(III) and AA for the complexation with AO7 were attributed to the inhibition effect of iron on the UV/AA process. The understanding of the role of iron provides insight into the practical application of the UV/AA process.

Acetone and the precursor ligand acetylacetone: distinctly different electron beam induced decomposition?

In focused electron beam induced deposition (FEBID) acetylacetone plays a role as a ligand in metal acetylacetonate complexes. As part of a larger effort to understand the chemical processes in FEBID, the electron-induced reactions of acetylacetone were studied both in condensed layers and in the gas phase and compared to those of acetone. X-ray photoelectron spectroscopy (XPS) shows that the electron-induced decomposition of condensed acetone layers yields a non-volatile hydrocarbon residue while electron irradiation of acetylacetone films produces a non-volatile residue that contains not only much larger amounts of carbon but also significant amounts of oxygen. Electron-stimulated desorption (ESD) and thermal desorption spectrometry (TDS) measurements reveal striking differences in the decay kinetics of the layers. In particular, intact acetylacetone suppresses the desorption of volatile products. Gas-phase studies of dissociative electron attachment and electron impact ionization suggest that this effect cannot be traced back to differences in the initial fragmentation reactions of the isolated molecules but is due to subsequent dissociation processes and to an efficient reaction of released methyl radicals with adjacent acetylacetone molecules. These results could explain the incorporation of large amounts of ligand material in deposits fabricated by FEBID processes using acetylacetonate complexes.

Atmospheric chemistry of acetylacetone

A kinetic study on the reactions of the OH radical and ozone with acetylacetone (AcAc) has been performed in a 1080 L quartz glass reaction chamber using in situ FTIR spectroscopy analysis. Temperature dependent rate coefficients for the reaction of AcAc with the OH radical were determined over the temperature range 285-310 K using the relative kinetic method. The following Arrhenius expression was derived: k = 3.35 x 10(-12) exp((983 +/- 130)/T) cm3 molecule(-1) s(-1), where the indicated error is the two least-squares deviation. A rate coefficient (in units of cm3 molecule(-1) s(-1)) of (1.03 +/- 0.31) x 10(-18) has been obtained at (298 +/- 3) K for the reaction of ozone with AcAc. A product investigation on the gas-phase reaction of OH radical with AcAc was conducted in a 405 L borosilicate glass chamber using in situ FTIR spectroscopy to monitor reactants and products. Methylglyoxal, acetic acid, peroxy acetic nitrate (PAN) were positively identified as products with molar yields of (20.8 +/- 4.5)%, (16.9 +/- 3.4)%, and (2.0 +/- 0.5)%, respectively. From the residual infrared spectrum the main products are attributed to 2,3,4-pentantrione (CH3-CO-CO-CO-CH3) and its hydrated analogue pentan-2,3-dione-4-diol (CH3-CO-CO-C(OH)2-CH3). Based on the observed products, a simplified mechanism for the reaction of the OH radical with AcAc is proposed.

Luminescence and Raman Spectra of Acetylacetone at Low Temperatures

Raman spectra of acetylacetone were recorded for molecules isolated in an argon matrix at 10 K and for a polycrystalline sample. In the solid sample, broad bands appear superimposed on a much weaker Raman spectrum corresponding mainly to the stable enol form. The position of these bands depends on the excitation wavelength (514.5 and 488.8 nm argon ion laser lines were used), sample temperature, and cooling history. They are attributed to transitions from an excited electronic state to various isomer states in the ground electronic state. Laser photons have energies comparable to energies of a number of excited triplet states predicted for a free acetylacetone molecule (Chen, X.-B.; Fang, W.-H.; Phillips, D. L. J. Phys. Chem. A 2006, 110, 4434). Since singlet-to-triplet photon absorption transitions are forbidden, states existing in the solid have mixed singlet/triplet character. Their decay results in population of different isomer states, which except for the lowest isomers SYN enol, TS2 enol (described in Matanović I.; Doslić, N. J. Phys. Chem. A 2005, 109, 4185), and the keto form, which can be detected in the Raman spectra of the solid, are not vibrationally resolved. Differential scanning calorimetry detected two signals upon cooling of acetylacetone, one at 229 K and one at 217 K, while upon heating, they appear at 254 and 225 K. The phase change at higher temperature is attributed to a freezing/melting transition, while the one at lower temperature seems to correspond to freezing/melting of keto domains, as suggested by Johnson et al. (Johnson, M. R.; Jones, N. H.; Geis, A; Horsewill. A. J.; Trommsdorff, H. P. J. Chem. Phys. 2002, 116, 5694). Using matrix isolation in argon, the vibrational spectrum of acetylacetone at 10 K was recorded. Strong bands at 1602 and 1629 cm(-1) are assigned as the SYN enol bands, while a weaker underlying band at 1687 cm(-1) and a medium shoulder at 1617 cm(-1) are assigned as TS2 enol bands.

Computational study on the bond dissociation enthalpies in the enolic and ketonic forms of beta-diketones: their influence on metal-ligand bond enthalpies

A computational study on the thermodynamic properties of 13 beta-diketones is presented. The B3LYP//6-311+G(2d,2p)//B3LYP/6-31G(d) theoretical approach was employed to compute the O-H and C-H bond dissociation enthalpies and enthalpy of tautomerization and to estimate standard gas-phase enthalpies of formation for the radicals and for the parent molecules. The gas-phase enthalpies of formation for the neutral molecules are in excellent agreement with available experimental data, supporting the estimates made for the radicals. The latter are very important for the clarification of the thermochemistry of many beta-diketonato metal complexes previously reported in the literature. Importantly, when substituents R = -CHR' are attached to the beta-diketone's scaffold, C-H homolytic bond cleavage is always favored with respect to O-H bond scission.