Infrared Study of the Effect of Hydration on the Amide I Band and Aggregation Properties of Helical Peptides

Chasing weakly-bound biological water in aqueous environment near the peptide backbone by ultrafast 2D infrared spectroscopy

There has been a long-standing debate as to how many hydrogen bonds a peptide backbone amide can form in aqueous solution. Hydrogen-bonding structural dynamics of N-ethylpropionamide (a β-peptide model) in water was examined using infrared (IR) spectroscopy. Two amide-I sub bands arise mainly from amide C=O group that forms strong H-bonds with solvent water molecules (SHB state), and minorly from that involving one weak H-bond with water (WHB state). This picture is supported by molecular dynamics simulations and ab-initio calculations. Further, thermodynamics and kinetics of the SHB and WHB species were examined mainly by chemical-exchange two-dimensional IR spectroscopy, yielding an activation energy for the SHB-to-WHB exchange of 13.25 ± 0.52 kJ mol‒1, which occurs in half picosecond at room temperature. Our results provided experimental evidence of an unstable water molecule near peptide backbone, allowing us to gain more insights into the dynamics of the protein backbone hydration.

How do Antimicrobial Peptides Interact with the Outer Membrane of Gram-Negative Bacteria? Role of Lipopolysaccharides in Peptide Binding, Anchoring, and Penetration

Gram-negative bacteria possess a complex structural cell envelope that constitutes a barrier for antimicrobial peptides that neutralize the microbes by disrupting their cell membranes. Computational and experimental approaches were used to study a model outer membrane interaction with an antimicrobial peptide, melittin. The investigated membrane included di[3-deoxy-d-manno-octulosonyl]-lipid A (KLA) in the outer leaflet and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) in the inner leaflet. Molecular dynamics simulations revealed that the positively charged helical C-terminus of melittin anchors rapidly into the hydrophilic headgroup region of KLA, while the flexible N-terminus makes contacts with the phosphate groups of KLA, supporting melittin penetration into the boundary between the hydrophilic and hydrophobic regions of the lipids. Electrochemical techniques confirmed the binding of melittin to the model membrane. To probe the peptide conformation and orientation during interaction with the membrane, polarization modulation infrared reflection absorption spectroscopy was used. The measurements revealed conformational changes in the peptide, accompanied by reorientation and translocation of the peptide at the membrane surface. The study suggests that melittin insertion into the outer membrane affects its permeability and capacitance but does not disturb the membrane's bilayer structure, indicating a distinct mechanism of the peptide action on the outer membrane of Gram-negative bacteria.

Functional Characterization, Antimicrobial Effects, and Potential Antibacterial Mechanisms of NpHM4, a Derived Peptide of Nautilus pompilius Hemocyanin

Hemocyanins present in the hemolymph of invertebrates are multifunctional proteins that are responsible for oxygen transport and play crucial roles in the immune system. They have also been identified as a source of antimicrobial peptides during infection in mollusks. Hemocyanin has also been identified in the cephalopod ancestor Nautilus, but antimicrobial peptides derived from the hemocyanin of Nautilus pompilius have not been reported. Here, the bactericidal activity of six predicted peptides from N. pompilius hemocyanin and seven mutant peptides was analyzed. Among those peptides, a mutant peptide with 15 amino acids (1RVFAGFLRHGIKRSR15), NpHM4, showed relatively high antibacterial activity. NpHM4 was determined to have typical antimicrobial peptide characteristics, including a positive charge (+5.25) and a high hydrophobic residue ratio (40%), and it was predicted to form an alpha-helical structure. In addition, NpHM4 exhibited significant antibacterial activity against Gram-negative bacteria (MBC = 30 μM for Vibrio alginolyticus), with no cytotoxicity to mammalian cells even at a high concentration of 180 µM. Upon contact with V. alginolyticus cells, we confirmed that the bactericidal activity of NpHM4 was coupled with membrane permeabilization, which was further confirmed via ultrastructural images using a scanning electron microscope. Therefore, our study provides a rationalization for the development and optimization of antimicrobial peptide from the cephalopod ancestor Nautilus, paving the way for future novel AMP development with broad applications.

Antarctic krill-derived peptides with consecutive Glu residues enhanced iron binding, solubility, and absorption

Three peptides containing three glutamic acid (Glu) residues at different positions derived from Antarctic krill were obtained to investigate their iron-binding properties, digestive stability, and effectiveness on enhancing iron solubility and absorption. Results indicated that Fe2+ bound to the carbonyl, carboxyl, or hydroxyl groups of DELEDSLER, EEEFDATR, and DTDSEEEIR at stoichiometric ratios of 0.453, 0.466, and 0.490, respectively. DTDSEEEIR with three consecutive Glu in the middle of the sequence possessed higher iron-binding ability and iron release potential than EEEFDATR with three consecutive Glu in the N-terminal, and DELEDSLER with three discontinuous Glu showed the lowest values. Although EEEFDATR showed remarkably lower digestion stability than DTDSEEEIR, the effect of EEEFDATR-iron on iron solubility and absorption was comparable to that of DTDSEEEIR-iron, but better than that of DELEDSLER-iron and FeSO4. Thus, peptides with consecutive Glu have the potential as an effective iron carrier to improve iron absorption.

The role of water in the primary nucleation of protein amyloid aggregation

The understanding of the complex conformational landscape of amyloid aggregation and its modulation by relevant physicochemical and cellular factors is a prerequisite for elucidating some of the molecular basis of pathology in amyloid related diseases, and for developing and evaluating effective disease-specific therapeutics to reduce or eliminate the underlying sources of toxicity in these diseases. Interactions of proteins with solvating water have been long considered to be fundamental in mediating their function and folding; however, the relevance of water in the process of protein amyloid aggregation has been largely overlooked. Here, we provide a perspective on the role water plays in triggering primary amyloid nucleation of intrinsically disordered proteins (IDPs) based on recent experimental evidences. The initiation of amyloid aggregation likely results from the synergistic effect between both protein intermolecular interactions and the properties of the water hydration layer of the protein surface. While the self-assembly of both hydrophobic and hydrophilic IDPs would be thermodynamically favoured due to large water entropy contributions, large desolvation energy barriers are expected, particularly for the nucleation of hydrophilic IDPs. Under highly hydrating conditions, primary nucleation is slow, being facilitated by the presence of nucleation-active surfaces (heterogeneous nucleation). Under conditions of poor water activity, such as those found in the interior of protein droplets generated by liquid-liquid phase separation, however, the desolvation energy barrier is significantly reduced, and nucleation can occur very rapidly in the bulk of the solution (homogeneous nucleation), giving rise to structurally distinct amyloid polymorphs. Water, therefore, plays a key role in modulating the transition free energy of amyloid nucleation, thus governing the initiation of the process, and dictating the type of preferred primary nucleation and the type of amyloid polymorph generated, which could vary depending on the particular microenvironment that the protein molecules encounter in the cell.

The extent of protein hydration dictates the preference for heterogeneous or homogeneous nucleation generating either parallel or antiparallel β-sheet α-synuclein aggregates

α-Synuclein amyloid self-assembly is the hallmark of a number of neurodegenerative disorders, including Parkinson's disease, although there is still very limited understanding about the factors and mechanisms that trigger this process. Primary nucleation has been observed to be initiated in vitro at hydrophobic/hydrophilic interfaces by heterogeneous nucleation generating parallel β-sheet aggregates, although no such interfaces have yet been identified in vivo. In this work, we have discovered that α-synuclein can self-assemble into amyloid aggregates by homogeneous nucleation, without the need of an active surface, and with a preference for an antiparallel β-sheet arrangement. This particular structure has been previously proposed to be distinctive of stable toxic oligomers and we here demonstrate that it indeed represents the most stable structure of the preferred amyloid pathway triggered by homogeneous nucleation under limited hydration conditions, including those encountered inside α-synuclein droplets generated by liquid-liquid phase separation. In addition, our results highlight the key role that water plays not only in modulating the transition free energy of amyloid nucleation, and thus governing the initiation of the process, but also in dictating the type of preferred primary nucleation and the type of amyloid polymorph generated depending on the extent of protein hydration. These findings are particularly relevant in the context of in vivo α-synuclein aggregation where the protein can encounter a variety of hydration conditions in different cellular microenvironments, including the vicinity of lipid membranes or the interior of membraneless compartments, which could lead to the formation of remarkably different amyloid polymorphs by either heterogeneous or homogeneous nucleation.

Multiplicity of α-Synuclein Aggregated Species and Their Possible Roles in Disease

α-Synuclein amyloid aggregation is a defining molecular feature of Parkinson's disease, Lewy body dementia, and multiple system atrophy, but can also be found in other neurodegenerative disorders such as Alzheimer's disease. The process of α-synuclein aggregation can be initiated through alternative nucleation mechanisms and dominated by different secondary processes giving rise to multiple amyloid polymorphs and intermediate species. Some aggregated species have more inherent abilities to induce cellular stress and toxicity, while others seem to be more potent in propagating neurodegeneration. The preference for particular types of polymorphs depends on the solution conditions and the cellular microenvironment that the protein encounters, which is likely related to the distinct cellular locations of α-synuclein inclusions in different synucleinopathies, and the existence of disease-specific amyloid polymorphs. In this review, we discuss our current understanding on the nature and structure of the various types of α-synuclein aggregated species and their possible roles in pathology. Precisely defining these distinct α-synuclein species will contribute to understanding the molecular origins of these disorders, developing accurate diagnoses, and designing effective therapeutic interventions for these highly debilitating neurodegenerative diseases.

FTIR Analysis of Molecular Changes Associated with Warming Injury in Cryopreserved Leukocytes

In this article, we explored the effects of cooling rate, dimethyl sulfoxide (DMSO) concentration, and thawing protocol on the post-thaw viability of frozen human white blood cells (WBCs). Different cooling rates (1, 2, 5, 10, 20, and 50 °C/min) at two DMSO concentrations (5 and 10% v/v) were tested as the samples were cooled to -120 °C. Frozen samples were thawed following either a fast (100 °C/min) or slow (2 °C/min) warming protocol applied in either a single stage or in two stages interrupted by a 6 min hold at -40, -50, -60, -70, or -80 °C. The highest post-thaw viability was obtained when WBCs were cooled at 2 °C/min in a 5% DMSO solution and warmed at the fastest rate (100 °C/min) without any interruption. Post-thaw viability decreased when the warming rate was reduced or when rapid warming was interrupted by a hold at a temperature below -60 °C. To elucidate the mechanisms of warming injury in addition to the biological response, several key interfacial and molecular phenomena require greater understanding; thus, we used Fourier transform infrared (FTIR) spectroscopy to investigate the roles of molecular structure and conformation in damage to cryopreserved WBCs during warming. During warming, FTIR spectra revealed the accumulation of cellular protein and lipid membrane damage below -60 °C if the samples were thawed slowly at 2 °C/min. The results presented here suggest that irreversible alterations of biomolecular structure are correlated with cell injury during warming; these deleterious effects appeared to be caused by one or more low-temperature kinetic processes, consistent with eutectic formation/melting and/or devitrification in the intracellular milieu.

Localized Nanoscale Heating Leads to Ultrafast Hydrogel Volume-Phase Transition

The rate of the volume-phase transition for stimuli-responsive hydrogel particles ranging in size from millimeters to nanometers is limited by the rate of water transport, which is proportional to the surface area of the particle. Here, we hypothesized that the rate of volume-phase transition could be accelerated if the stimulus is geometrically controlled from the inside out, thus facilitating outward water ejection. To test this concept, we applied transient absorption spectroscopy, laser temperature-jump spectroscopy, and finite-element analysis modeling to characterize the dynamics of the volume-phase transition of hydrogel particles with a gold nanorod core. Our results demonstrate that the nanoscale heating of the hydrogel particle core led to an ultrafast, 60 ns particle collapse, which is 2-3 orders of magnitude faster than the response generated from conventional heating. This is the fastest recorded response time of a hydrogel material, thus opening potential applications for such stimuli-responsive materials.

Surface-Enhanced Infrared Absorption Spectroscopy of Bacterial Nitric Oxide Reductase under Electrochemical Control Using a Vibrational Probe of Carbon Monoxide

Nitric oxide reductases (NORs) reduce nitric oxide to nitrous oxide in the denitrification pathway of the global nitrogen cycle. NORs contain four iron cofactors and the NO reduction occurs at the heme b₃/nonheme Fe_B binuclear active site. The determination of reduction potentials of the iron cofactors will help us elucidate the enzymatic reaction mechanism. However, previous reports on these potentials remain controversial. Herein, we performed electrochemical and surface-enhanced infrared absorption (SEIRA) spectroscopic measurements of Pseudomonas aeruginosa NOR immobilized on gold electrodes. Cyclic voltammograms exhibited two reduction peaks at -0.11 and -0.44 V vs SHE, and a SEIRA spectrum using a vibrational probe of CO showed a characteristic band at 1972 cm^-1 at -0.4 V vs SHE, which was assigned to νCO of heme b₃-CO. Our results suggest that the reduction of heme b₃ initiates the enzymatic NO reduction.

Synthesis of whey peptide-iron complexes: Influence of using different iron precursor compounds

Iron-binding peptides are an alternative for increasing the bioavailability of iron and to decreasing its pro-oxidant effect. This study aimed to synthesize and characterize peptide-iron complexes using FeCl₂ or FeSO₄ as the iron precursor compounds. Whey protein isolate (WPI), WPI hydrolyzed with pancreatin, and its fractions obtained via ultrafiltration (cut-off 5kDa) were used as ligands. The fluorescence intensity of the ligands significantly decreased as the iron concentration increased as a result of metal coordination with the iron-binding sites, which may have led to changes in the microenvironment of tryptophan. For both iron precursor compounds, the primary iron-binding site was carboxylate groups, and the linkage occurred via a bidentate coordination mode with two vibrational modes assigned to the COOFe linkage. However, infrared spectroscopy and thermal analysis results showed that the dynamics of the interaction is different for the iron precursor. The iron source may be of great importance because it may impact iron absorption and the pro-oxidant effect of the mineral.

Demixing of water and ethanol causes conformational redistribution and gelation of the cationic GAG tripeptide

The cationic tripeptide GAG undergoes three conformational changes in binary mixtures of water and ethanol. At 17 mol% of ethanol conformational sampling is shifted from pPII towards β-strands. A more pronounced shift in the same direction occurs at 40 mol%. At ca. 55 mol% of ethanol and above a peptide concentration of ca. 0.2 M the ternary peptide-water-ethanol mixture forms a hydrogel which is comprised of unusually large crystalline like non-β sheet fibrils forming a sample spanning matrix.

Inhibition of multidrug resistant Listeria monocytogenes by peptides isolated from combinatorial phage display libraries

The aim of the study was to isolate and characterize novel antimicrobial peptides from peptide phage library with antimicrobial activity against multidrug resistant Listeria monocytogenes. Combinatorial phage-display library was used to affinity select peptides binding to the cell surface of multidrug resistant L. monocytogenes. After several rounds of affinity selection followed by sequencing, three peptides were revealed as the most promising candidates. Peptide L2 exhibited features common to antimicrobial peptides (AMPs), and was rich in Asp, His and Lys residues. Peptide L3 (NSWIQAPDTKSI), like peptide L2, inhibited bacterial growth in vitro, without any hemolytic or cytotoxic effects on eukaryotic cells. L1 peptide showed no inhibitory effect on Listeria. Structurally, peptides L2 and L3 formed random coils composed of α-helix and β-sheet units. Peptides L2 and L3 exhibited antimicrobial activity against multidrug resistant isolates of L. monocytogenes with no haemolytic or toxic effects. Both peptides identified in this study have the potential to be beneficial in human and veterinary medicine.

Fourier transform infrared spectroscopy on external perturbations inducing secondary structure changes of hemoglobin

The secondary structure of proteins and their conformation are intimately related to their biological functions.

Interplay between Lipid Interaction and Homo-coiling of Membrane-Tethered Coiled-Coil Peptides

The designed coiled-coil-forming peptides E [(EIAALEK)3] and K [(KIAALKE)3] are known to trigger efficient membrane fusion when they are tethered to lipid vesicles in the form of lipopeptides. Knowledge of their secondary structure is a key element in understanding their role in membrane fusion. Special conditions can be found at the interface of the membrane, where the peptides are confined in close proximity to other peptide molecules as well as to the lipid interface. Consequently, different structural states were proposed for the peptides when tethered to this interface. Due to the multitude of possible states, determining the structure solely on the basis of circular dichroism (CD) spectra at a single temperature can be misleading. In addition, it has not yet been possible to unambiguously distinguish between the membrane-bound and the coiled-coil states of these peptides by means of infrared (IR) spectroscopy due to their very similar amide I' bands. Here, the molecular basis of this similarity is investigated by means of site-specific (13)C-labeled FTIR spectroscopy. Structural similarities between the membrane-interacting helix of K and the homo-coiled-coil-forming helix of E are shown to cause the similar spectroscopic properties. Furthermore, the peptide structure is investigated using temperature-dependent CD and IR spectroscopy, and it is shown that the different states can be distinguished on the basis of their thermal behavior. It is shown that the two peptides behave fundamentaly differently when tethered to the lipid membrane, which implies that their role during membrane fusion is different and the mechanism of this process is asymmetric.

Exploring the role of hydration and confinement in the aggregation of amyloidogenic peptides Aβ(16-22) and Sup35(7-13) in AOT reverse micelles

Knowledge of how intermolecular interactions of amyloid-forming proteins cause protein aggregation and how those interactions are affected by sequence and solution conditions is essential to our understanding of the onset of many degenerative diseases. Of particular interest is the aggregation of the amyloid-β (Aβ) peptide, linked to Alzheimer's disease, and the aggregation of the Sup35 yeast prion peptide, which resembles the mammalian prion protein linked to spongiform encephalopathies. To facilitate the study of these important peptides, experimentalists have identified small peptide congeners of the full-length proteins that exhibit amyloidogenic behavior, including the KLVFFAE sub-sequence, Aβ16-22, and the GNNQQNY subsequence, Sup357-13. In this study, molecular dynamics simulations were used to examine these peptide fragments encapsulated in reverse micelles (RMs) in order to identify the fundamental principles that govern how sequence and solution environment influence peptide aggregation. Aβ16-22 and Sup357-13 are observed to organize into anti-parallel and parallel β-sheet arrangements. Confinement in the sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles is shown to stabilize extended peptide conformations and enhance peptide aggregation. Substantial fluctuations in the reverse micelle shape are observed, in agreement with earlier studies. Shape fluctuations are found to facilitate peptide solvation through interactions between the peptide and AOT surfactant, including direct interaction between non-polar peptide residues and the aliphatic surfactant tails. Computed amide I IR spectra are compared with experimental spectra and found to reflect changes in the peptide structures induced by confinement in the RM environment. Furthermore, examination of the rotational anisotropy decay of water in the RM demonstrates that the water dynamics are sensitive to the presence of peptide as well as the peptide sequence. Overall, our results demonstrate that the RM is a complex confining environment where substantial direct interaction between the surfactant and peptides plays an important role in determining the resulting ensemble of peptide conformations. By extension the results suggest that similarly complex sequence-dependent interactions may determine conformational ensembles of amyloid-forming peptides in a cellular environment.

Biomolecular Crowding Arising from Small Molecules, Molecular Constraints, Surface Packing, and Nano-Confinement

The effect of macromolecular crowding on the structure, dynamics, and reactivity of biomolecules is well established and the relevant research has been extensively reviewed. Herein, we focus our discussion on crowding effects arising from small cosolvent molecules and densely packed surface conditions. In addition, we highlight recent efforts that capitalize on the excluded volume effect for various tailored biochemical and biophysical applications. Specifically, we discuss how a targeted increase in local mass density can be exploited to gain insight into the folding dynamics of the protein of interest and how confinement via reverse micelles can be used to study a range of biophysical questions, from protein hydration dynamics to amyloid formation.

Hydration and vibrational dynamics of betaine (N,N,N-trimethylglycine)

Zwitterions are naturally occurring molecules that have a positive and a negative charge group in its structure and are of great importance in many areas of science. Here, the vibrational and hydration dynamics of the zwitterionic system betaine (N,N,N-trimethylglycine) is reported. The linear infrared spectrum of aqueous betaine exhibits an asymmetric band in the 1550-1700 cm(-1) region of the spectrum. This band is attributed to the carboxylate asymmetric stretch of betaine. The potential of mean force computed from ab initio molecular dynamic simulations confirms that the two observed transitions of the linear spectrum are related to two different betaine conformers present in solution. A model of the experimental data using non-linear response theory agrees very well with a vibrational model comprising of two vibrational transitions. In addition, our modeling shows that spectral parameters such as the slope of the zeroth contour plot and central line slope are both sensitive to the presence of overlapping transitions. The vibrational dynamics of the system reveals an ultrafast decay of the vibrational population relaxation as well as the correlation of frequency-frequency correlation function (FFCF). A decay of ∼0.5 ps is observed for the FFCF correlation time and is attributed to the frequency fluctuations caused by the motions of water molecules in the solvation shell. The comparison of the experimental observations with simulations of the FFCF from ab initio molecular dynamics and a density functional theory frequency map shows a very good agreement corroborating the correct characterization and assignment of the derived parameters.

Dissecting amide-I vibration in β-peptide helices

The vibrational properties of the amide-I modes of β-peptides in five helical conformations (8-helix, 10-helix, 12-helix, 14-helix, and 10/12-helix) from tetramer to heptamer were examined by ab initio calculations. The normal modes have been first decoupled into local modes, whose transition energies are found to be intrinsically sensitive to peptide structure and intramolecular hydrogen bonding interactions. By further removing the intramolecular hydrogen bonding interactions, pure local modes are obtained, whose transition energies still exhibit some conformational dependence in 8-helix and 10/12 hybrid helix, but not much in homogeneous 10-, 12-, and 14-helical conformations. This suggests that a set of nearly degenerated pure local-mode transitions can be specified when excitonic modeling the amide-I vibration in latter cases. The work provides important benchmark measurements for understanding the complexity of the amide-I absorption spectra of β-polypeptides.

Interaction of a novel platinum drug with bovine serum albumin: FTIR and UV-Vis spectroscopy analysis

Platinum-Blue docks at a hydrophobic cavity at low concentrations with a binding constant comparable to that of cisplatin.

Sodium dodecyl sulfate monomers induce XAO peptide polyproline II to α-helix transition

XAO peptide (Ac–X₂A₇O₂–NH₂; X: diaminobutyric acid side chain, −CH₂CH₂NH₃⁺; O: ornithine side chain, −CH₂CH₂CH₂NH₃⁺) in aqueous solution shows a predominantly polyproline II (PPII) conformation without any detectable α-helix-like conformations. Here we demonstrate by using circular dichroism (CD), ultraviolet resonance Raman (UVRR) and nuclear magnetic resonance (NMR) spectroscopy that sodium dodecyl sulfate (SDS) monomers bind to XAO and induce formation of α-helix-like conformations. The stoichiometry and the association constants of SDS and XAO were determined from the XAO–SDS diffusion coefficients measured by pulsed field gradient NMR. We developed a model for the formation of XAO–SDS aggregate α-helix-like conformations. Using UVRR spectroscopy, we calculated the Ramachandran ψ angle distributions of aggregated XAO peptides. We resolved α-, π- and 3₁₀- helical conformations and a turn conformation. XAO nucleates SDS aggregation at SDS concentrations below the SDS critical micelle concentration. The XAO₄–SDS₁₆ aggregates have four SDS molecules bound to each XAO to neutralize the four side chain cationic charges. We propose that the SDS alkyl chains partition into a hydrophobic core to minimize the hydrophobic area exposed to water. Neutralization of the flanking XAO charges enables α-helix formation. Four XAO–SDS₄ aggregates form a complex with an SDS alkyl chain-dominated hydrophobic core and a more hydrophilic shell where one face of the α-helix peptide contacts the water environment.

Membrane interactions of fusogenic coiled-coil peptides: implications for lipopeptide mediated vesicle fusion

Fusion of lipid membranes is an important natural process for the intra- and intercellular exchange of molecules. However, little is known about the actual fusion mechanism at the molecular level. In this study we examine a system that models the key features of this process. For the molecular recognition between opposing membranes two membrane anchored heterodimer coiled-coil forming peptides called 'E' (EIAALEK)3 and 'K' (KIAALKE)3 were used. Lipid monolayers and IR reflection absorption spectroscopy (IRRAS) revealed the interactions of the peptides 'E', 'K', and their parallel coiled-coil complex 'E/K' with the phospholipid membranes and thereby mimicked the pre- and postfusion states, respectively. The peptides adopted α-helical structures and were incorporated into the monolayers with parallel orientation. The strength of binding to the monolayer differed for the peptides and tethering them to the membrane increased the interactions even further. Remarkably, these interactions played a role even in the postfusion state. These findings shed light on important mechanistic details of the membrane fusion process in this model system. Furthermore, their implications will help to improve the rational design of new artificial membrane fusion systems, which have a wide range of potential applications in supramolecular chemistry and biomedicine.

Empirical maps for the calculation of amide I vibrational spectra of proteins from classical molecular dynamics simulations

New sets of parameters (maps) for calculating amide I vibrational spectra for proteins through a vibrational exciton model are proposed. The maps are calculated as a function of electric field and van der Waals forces on the atoms of peptide bonds, taking into account the full interaction between peptide bonds and the surrounding environment. The maps are designed to be employed using data obtained from standard all-atom molecular simulations without any additional constraints on the system. Six proteins representing a wide range of sizes and secondary structure complexity were chosen as a test set. Spectra calculated for these proteins reproduce experimental data both qualitatively and quantitatively. The proposed maps lead to spectra that capture the weak second peak observed in proteins containing β-sheets, allowing for clear distinction between α-helical and β-sheet proteins. While the parametrization is specific to the CHARMM force field, the methodology presented can be readily applied to any empirical force field.

Amide-I characteristics of helical β-peptides by linear infrared measurement and computations

In this work, we have examined the amide-I characteristics of three β-peptide oligomers in typical helical conformations (two in 14-helix and one in 12/10-helix), solvated in water, methanol, and chloroform, respectively. Local-mode frequencies and their distributions were computed using a molecular-mechanics force field based frequency map that was constructed on the basis of molecular dynamics simulations. The local-mode frequencies were found to be determined primarily by peptide backbone and side chain, rather by solvent, suggesting their local structural sensitivities. Intermode vibrational couplings computed using a transition dipole scheme were found to be very sensitive to peptide conformation, with their signs and magnitudes varying periodically along the peptide chain. Linear infrared absorption spectra of the three peptides, simulated using a frequency-frequency time-correlation function method, were found to be in fair agreement with experimental results. Normalized potential energy distribution analysis indicated that the amide-I mode can delocalize over a few amide units. However, the IR band structure appears to be more sophisticated in helical β-peptides than in helical α-peptides.

Interactions between inorganic pigments and proteinaceous binders in reference paint reconstructions

The degradation of the proteinaceous binders, ovalbumin (OVA) and casein, and their interactions with azurite (Cu(3)(CO(3))(2)(OH)(2)), calcium carbonate (CaCO(3)), hematite (Fe(2)O(3)) and red lead (Pb(3)O(4)) pigments were studied. A multi-analytical approach based on Thermogravimetric Analysis (TG), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR) and Size Exclusion Chromatography (SEC) was used. The research was carried out on a set of paint reconstructions, which were analysed before and after artificial light ageing. We highlighted that in most cases the inorganic pigments interact with both proteins by decreasing their thermal stability and their intermolecular β-sheet content, and that ageing induces aggregation. We hypothesized that pigments intercalate between protein molecules, producing a partial disruption to the protein-protein intermolecular interaction. In the case of casein, these phenomena continued during ageing. In fact, we observed a complete disappearance of intermolecular β-sheets and an increase in intramolecular β-sheets and random coil during ageing. This result is in agreement with the structural properties of casein, whose aggregation is known to be induced by hydrophobic interactions. On the other hand, in aged OVA paint replicas, we observed the formation of new intermolecular β-sheets and an increase in thermostability. In addition FTIR showed oxidation of the side chains of the aged OVA/hematite sample and aged casein pigment samples, and SEC highlighted hydrolysis phenomena in aged carbonate, azurite and red lead/OVA complexes and in aged casein/calcium carbonate and casein/azurite samples.

Probing the structure and dynamics of confined water in AOT reverse micelles

Reverse micelles are attractive nanoscale systems used for the confinement of molecules in studies of structure and chemical reactions, including protein folding, and aggregation. The simulation of reverse micelles, in which a water "pool" is separated from a nonpolar bulk phase by a surfactant layer, poses significant challenges to empirical force fields due to the diversity of interactions between nonpolar, polar, and charged groups. We have explored the dependence of system density, reverse micelle structure, and water configurational relaxation times as a function of reverse micelle composition, including water:surfactant ratio, absolute number of water molecules, and force field using molecular dynamics simulations. The resulting structures and dynamics are found to depend more on the force field used than on varying interpretations of the water:surfactant ratio in terms of absolute size of the reverse micelle. Substantial deviations from spherical reverse micelle geometries are observed in all unrestrained simulations. Rotational anisotropy decay times and water residence times show a strong dependence on force field and water model used, but power-law relaxation in time is observed independent of the force field. Our results suggest the need for further experimental study of reverse micelles that can provide insight into the distribution and dynamics of shape fluctuations in these complex systems.

The effects of ferulic acid on β-amyloid fibrillar structures investigated through experimental and computational techniques

BACKGROUND

Current research has indicated that small natural compounds could interfere with β-amyloid fibril growth and have the ability to disassemble preformed folded structures. Ferulic acid (FA), which possesses both hydrophilic and hydrophobic moieties and binds to peptides/proteins, is a potential candidate against amyloidogenesis. The molecular mechanisms connected to this action have not been elucidated in detail yet.

METHODS

Here the effects of FA on preformed fibrils are investigated by means of a concerted experimental-computational approach. Spectroscopic techniques, such as FTIR, fluorescence, size exclusion chromatography and confocal microscopy in combination with molecular dynamics simulations are used to identify those features which play a key role in the destabilization of the aggregates.

RESULTS

Experimental findings highlight that FA has disruptive effects on the fibrils. The computational analysis suggests that dissociation of peptides from the amyloid superstructures could take place along the fibril axis and be primarily determined by the cooperative rupture of the backbone hydrogen bonds and of the Asp-Lys salt bridges.

CONCLUSION

FA clusters could induce a sort of stabilization and tightening of the fibril structure in the short term and its disruption in the long term, inhibiting further fibril re-assembly through FA screening effects.

GENERAL SIGNIFICANCE

The combination of experimental and computational techniques could be successfully used to identify the disrupting action of FA on preformed Aβ fibrils in water solution.

Infrared spectroscopy of proteins in reverse micelles

Reverse micelles are a versatile model system for the study of crowded microenvironments containing limited water, such as those found in various tissue spaces or endosomes. They also preclude protein aggregation. Reverse micelles are amenable to study by linear and nonlinear infrared spectroscopies, which have demonstrated that the encapsulation of polypeptides and enzymatically active proteins into reverse micelles leads to conformational changes not seen in bulk solution. The potential value of this model system for understanding the folding and kinetic behavior of polypeptides and proteins in biologically important circumstances warrants increased study of reverse micelle systems by infrared spectroscopy. This article is part of a Special Issue entitled: FTIR in membrane proteins and peptide studies.

Solute's perspective on how trimethylamine oxide, urea, and guanidine hydrochloride affect water's hydrogen bonding ability

While the thermodynamic effects of trimethylamine oxide (TMAO), urea, and guanidine hydrochloride (GdnHCl) on protein stability are well understood, the underlying mechanisms of action are less well characterized and, in some cases, even under debate. Herein, we employ the stretching vibration of two infrared (IR) reporters, i.e., nitrile (C≡N) and carbonyl (C═O), to directly probe how these cosolvents mediate the ability of water to form hydrogen bonds with the solute of interest, e.g., a peptide. Our results show that these three agents, despite having different effects on protein stability, all act to decrease the strength of the hydrogen bonds formed between water and the infrared probe. While the behavior of TMAO appears to be consistent with its protein-protecting ability, those of urea and GdnHCl are inconsistent with their role as protein denaturants. The latter is of particular interest as it provides strong evidence indicating that although urea and GdnHCl can perturb the hydrogen-bonding property of water their protein-denaturing ability does not arise from a simple indirect mechanism.

Thermally induced protein unfolding probed by isotope-edited IR spectroscopy

Infrared (IR) spectroscopy has been widely utilized for the study of protein folding, unfolding, and misfolding processes. We have previously developed a theoretical method for calculating IR spectra of proteins in the amide I region. In this work, we apply this method, in combination with replica-exchange molecular dynamics simulations, to study the equilibrium thermal unfolding transition of the villin headpiece subdomain (HP36). Temperature-dependent IR spectra and spectral densities are calculated. The spectral densities correctly reflect the unfolding conformational changes in the simulation. With the help of isotope labeling, we are able to capture the feature that helix 2 of HP36 loses its secondary structure before global unfolding occurs, in agreement with experiment.

Temperature dependence of water interactions with the amide carbonyls of α-helices

Hydration is a key determinant of the folding, dynamics, and function of proteins. In this study, temperature-dependent Fourier transform infrared (FTIR) spectroscopy combined with singular value decomposition (SVD) and global fitting were used to investigate both the interaction of water with α-helical proteins and the cooperative thermal unfolding of these proteins. This methodology has been applied to an isolated α-helix (Fs peptide) and to globular α-helical proteins including the helical subdomain and full-length villin headpiece (HP36 and HP67). The results suggest a unique IR signature for the interaction of water with the helical amide carbonyl groups of the peptide backbone. The IR spectra indicate a weakening of the net hydrogen bond strength of water to the backbone carbonyls with increasing temperature. This weakening of the backbone solvation occurs as a discrete transition near the maximum of the temperature-dependent hydrophobic effect, not a continuous change with increasing temperature. Possible molecular origins of this effect are discussed with respect to previous molecular dynamics simulations of the temperature-dependent solvation of the helix backbone.

Spectroscopic studies of protein folding: linear and nonlinear methods

Although protein folding is a simple outcome of the underlying thermodynamics, arriving at a quantitative and predictive understanding of how proteins fold nevertheless poses huge challenges. Therefore, both advanced experimental and computational methods are continuously being developed and refined to probe and reveal the atomistic details of protein folding dynamics and mechanisms. Herein, we provide a concise review of recent developments in spectroscopic studies of protein folding, with a focus on new triggering and probing methods. In particular, we describe several laser-based techniques for triggering protein folding/unfolding on the picosecond and/or nanosecond timescales and various linear and nonlinear spectroscopic techniques for interrogating protein conformations, conformational transitions, and dynamics.

Roles of hydrophobicity and charge distribution of cationic antimicrobial peptides in peptide-membrane interactions

Cationic antimicrobial peptides (CAPs) occur as important innate immunity agents in many organisms, including humans, and offer a viable alternative to conventional antibiotics, as they physically disrupt the bacterial membranes, leading to membrane lysis and eventually cell death. In this work, we studied the biophysical and microbiological characteristics of designed CAPs varying in hydrophobicity levels and charge distributions by a variety of biophysical and biochemical approaches, including in-tandem atomic force microscopy, attenuated total reflection-FTIR, CD spectroscopy, and SDS-PAGE. Peptide structural properties were correlated with their membrane-disruptive abilities and antimicrobial activities. In bacterial lipid model membranes, a time-dependent increase in aggregated β-strand-type structure in CAPs with relatively high hydrophobicity (such as KKKKKKALFALWLAFLA-NH(2)) was essentially absent in CAPs with lower hydrophobicity (such as KKKKKKAAFAAWAAFAA-NH(2)). Redistribution of positive charges by placing three Lys residues at both termini while maintaining identical sequences minimized self-aggregation above the dimer level. Peptides containing four Leu residues were destructive to mammalian model membranes, whereas those with corresponding Ala residues were not. This finding was mirrored in hemolysis studies in human erythrocytes, where Ala-only peptides displayed virtually no hemolysis up to 320 μM, but the four-Leu peptides induced 40-80% hemolysis at the same concentration range. All peptides studied displayed strong antimicrobial activity against Pseudomonas aeruginosa (minimum inhibitory concentrations of 4-32 μM). The overall findings suggest optimum routes to balancing peptide hydrophobicity and charge distribution that allow efficient penetration and disruption of the bacterial membranes without damage to mammalian (host) membranes.

Power-law dependence of the melting temperature of ubiquitin on the volume fraction of macromolecular crowders

The dependence of the melting temperature increase (ΔT(m)) of the protein ubiquitin on the volume fraction (ϕ) of several commonly used macromolecular crowding agents (dextran 6, 40, and 70 and ficoll 70) was quantitatively examined and compared to a recently developed theoretical crowding model, i.e., ΔT(m) ∼ (R(g)∕R(c))(α)φ(α∕3). We found that in the current case this model correctly predicts the power-law dependence of ΔT(m) on φ but significantly overestimates the role of the size (i.e., R(c)) of the crowding agent. In addition, we found that for ubiquitin the exponent α is in the range of 4.1-6.5, suggesting that the relation of α=3∕(3ν-1) is a better choice for estimating α based on the Flory coefficient (ν) of the polypeptide chain. Taken together these findings highlight the importance of improving our knowledge and theoretical treatment of the microcompartmentalization of the commonly used model crowding agents.

Transmembrane orientation and possible role of the fusogenic peptide from parainfluenza virus 5 (PIV5) in promoting fusion

Membrane fusion is required for diverse biological functions ranging from viral infection to neurotransmitter release. Fusogenic proteins increase the intrinsically slow rate of fusion by coupling energetically downhill conformational changes of the protein to kinetically unfavorable fusion of the membrane-phospholipid bilayers. Class I viral fusogenic proteins have an N-terminal hydrophobic fusion peptide (FP) domain, important for interaction with the target membrane, plus a C-terminal transmembrane (C-term-TM) helical membrane anchor. The role of the water-soluble regions of fusogenic proteins has been extensively studied, but the contributions of the membrane-interacting FP and C-term-TM peptides are less well characterized. Typically, FPs are thought to bind to membranes at an angle that allows helix penetration but not traversal of the lipid bilayer. Here, we show that the FP from the paramyxovirus parainfluenza virus 5 fusogenic protein, F, forms an N-terminal TM helix, which self-associates into a hexameric bundle. This FP also interacts strongly with the C-term-TM helix. Thus, the fusogenic F protein resembles SNARE proteins involved in vesicle fusion by having water-soluble coiled coils that zipper during fusion and TM helices in both membranes. By analogy to mechanosensitive channels, the force associated with zippering of the water-soluble coiled-coil domain is expected to lead to tilting of the FP helices, promoting interaction with the C-term-TM helices. The energetically unfavorable dehydration of lipid headgroups of opposing bilayers is compensated by thermodynamically favorable interactions between the FP and C-term-TM helices as the coiled coils zipper into the membrane phase, leading to a pore lined by both lipid and protein.