Conformational substates of horse heart cytochrome c exhibit different thermal unfolding of the heme cavity

Anion-Specific Effects on the Alkaline State of Cytochrome c

Specific effects of anions on the structure, thermal stability, and peroxidase activity of native (state III) and alkaline (state IV) cytochrome c (cyt c) have been studied by the UV-VIS absorbance spectroscopy, intrinsic tryptophan fluorescence, and circular dichroism. Thermal and isothermal denaturation monitored by the tryptophan fluorescence and circular dichroism, respectively, implied lower stability of cyt c state IV in comparison with the state III. The pK_a value of alkaline isomerization of cyt c depended on the present salts, i.e., kosmotropic anions increased and chaotropic anions decreased pK_a (Hofmeister effect on protein stability). The peroxidase activity of cyt c in the state III, measured by oxidation of guaiacol, showed clear dependence on the salt position in the Hofmeister series, while cyt c in the alkaline state lacked the peroxidase activity regardless of the type of anions present in the solution. The alkaline isomerization of cyt c in the presence of 8 M urea, measured by Trp59 fluorescence, implied an existence of a high-affinity non-native ligand for the heme iron even in a partially denatured protein conformation. The conformation of the cyt c alkaline state in 8 M urea was considerably modulated by the specific effect of anions. Based on the Trp59 fluorescence quenching upon titration to alkaline pH in 8 M urea and molecular dynamics simulation, we hypothesize that the Lys79 conformer is most likely the predominant alkaline conformer of cyt c. The high affinity of the sixth ligand for the heme iron is likely a reason of the lack of peroxidase activity of cyt c in the alkaline state.

Sample Flow Rate Scan in Electrospray Ionization Mass Spectrometry Reveals Alterations in Protein Charge State Distribution

Sample flow rate is one of the parameters that influence the sensitivity of electrospray ionization (ESI) mass spectrometry. By varying the sample flow rate, initial droplets of different sizes can be generated. Protein molecules in small droplets may form gas-phase ions earlier than the ones in large droplets. Here, we have systematically studied the influence of sample flow rate on the ESI charge state distributions (CSDs) of model proteins. A dedicated programmable sample flow rate scanner was used to infuse protein samples at different flow rates into a mass spectrometer. The synergistic influence of sample flow rate and various electrolytes (ammonium acetate, ammonium bicarbonate, ammonium formate, and piperidine) was studied. Significant alterations to the CSDs with increasing flow rate were observed. For example, in the presence of ammonium acetate, at low flow rates, lower charge states of proteins showed high intensities, while at high flow rates, ions related to higher charge states of proteins dominated the spectra. On the other hand, in the presence of piperidine, a significant reduction in the ion currents of all charge states was observed during the flow rate scan. Our observations suggest that at low flow rates the protein molecules follow a charged residue model of ionization mechanism, and at high flow rates-due to structural changes in protein molecules in large ESI droplets-the charged residue and chain ejection models can possibly coexist. We propose the use of sample flow rate scan as a way to reveal the influence of flow rate on the CSDs of the studied proteins.

Sub-micron sized cytochrome c particles adsorbing to solid surfaces: A comparison between solution phase and colloidal system

Present work reports on Cytochrome C (Cyt C) adsorption from solution and as sub-micron sized colloidal particles (pH 7.5) at fluid/solid interface. The colloidal particles from 2 methods ((method 1 freeze-thaw); (method 2-Decane/water interface)) have been characterized by UV-Visible spectroscopy, Static and Time resolved Fluorescence spectra and Circular dichroic spectroscopy. Morphology and size studies indicate that the colloids are solid and well-packed. Using Quartz crystal microbalance with dissipation, elastic compliance of the protein on quartz surface has been monitored. Properties of the protein from solution and as colloids assembled from method 2 are similar in elastic compliance (65.53 ± 1.2 and 73.5 ± 1.1 GPa^-1 respectively) due to polar/non-polar interactions at the solid surface. For particles from method 1, irregular desolvation of water on the particle surface results in higher compliance (104.3 ± 1.3 GPa^-1). Change in work of adhesion from contact angle profiles shows optimal adhesion for colloids from method 1 whereas the protein solution and as colloids from method 2, show subnormal adhesion. The work shows the role of extensive H-bonding with the hydrodynamically coupled water leading to a fluid like system in protein colloids from method 1 whereas those from method 2 behaved more like the pure protein adsorbing from solution.

Autoxidation of Reduced Horse Heart Cytochrome c Catalyzed by Cardiolipin-Containing Membranes

Visible circular dichroism, absorption, and fluorescence spectroscopy were used to probe the binding of horse heart ferrocytochrome c to anionic cardiolipin (CL) head groups on the surface of 1,1',2,2'-tetraoleoyl cardiolipin (TOCL)/1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) (20%:80%) liposomes in an aerobic environment. We found that ferrocytochrome c undergoes a conformational transition upon binding that leads to complete oxidation of the protein at intermediate and high CL concentrations. At low lipid concentrations, the protein maintains a structure that is only slightly different from its native one, whereas an ensemble of misligated predominantly hexacoordinated low-spin states become increasingly populated at high lipid concentrations. A minor fraction of conformations with either high- or quantum-mixed-spin states were detected at a CL to protein ratio of 200 (the largest one investigated). The population of the non-native state is less pronounced than that found for cytochrome c-CL interactions initiated with oxidized cytochrome c. Under anaerobic conditions, the protein maintains its reduced state but still undergoes some conformational change upon binding to CL head groups on the liposome surface. Our data suggest that CL-containing liposomes function as catalysts by reducing the activation barrier for a Fe²⁺ → O₂ electron transfer. Adding NaCl to the existing cytochrome-liposome mixtures under aerobic conditions inhibits protein autoxidation of ferrocytochrome c and stabilizes the reduced state of the membrane-bound protein.

Screen-printed graphite macroelectrodes for the direct electron transfer of cytochrome c: a deeper study of the effect of pH on the conformational states, immobilization and peroxidase activity

The direct electron transfer of cytochrome c has been studied at screen-printed graphite macroelectrodes without recourse to mediators or the need for any electrode pre-treatment as is commonly employed within the literature. A wide range of pH values from 2.0 to 11.0 have been explored upon the electrochemical response of cytochrome c and different voltammetric signatures have been observed. The direct electron transfer of the alkaline transition of cytochrome c was found impeded within alkaline media leading to either an irreversible redox process or even no voltammetric responses. In acidic aqueous media the electrochemical process is observed to undergo a mixed diffusion and adsorption controlled process rather than a purely diffusional process of the native conformation as observed at pH 7.0. Interestingly, at pH 3.5 a new conformational state is revealed in cooperation with the native conformation. The immobilization of the protein was satisfactorily obtained using a simple method by cycling the protein at specific solution pH values allowing amperometric responses to be obtained and gives rise to useful pseudo-peroxidase activity for sensing H2O2. Apparent Michaelis-Menten constant values (Km) were calculated via the Lineweaver-Burk method with deduced values of 25 ± 4, 98 ± 12 and 230 ± 30 mM, respectively for pH values of 2.0, 3.0 and 7.0. Such work is important for those utilising cytochrome c in bio-electrochemical and related applications.

Salt as a catalyst in the mitochondria: returning cytochrome c to its native state after it misfolds on the surface of cardiolipin containing membranes

Cytochrome c binding to cardiolipin receptors on the surface of TOCL/DOPC(20% : 80%) liposomes induces a conformational change, which is not reversible after the protein's dissociation at low ionic strength. Addition of 100 mM NaCl switches the protein back to its native state.

Cytochrome c: A Multifunctional Protein Combining Conformational Rigidity with Flexibility

Cytochrome has served as a model system for studying redox reactions, protein folding, and more recently peroxidase activity induced by partial unfolding on membranes. This review illuminates some important aspects of the research on this biomolecule. The first part summarizes the results of structural analyses of its active site. Owing to heme-protein interactions the heme group is subject to both in-plane and out-of-plane deformations. The unfolding of the protein as discussed in detail in the second part of this review can be induced by changes of pH and temperature and most prominently by the addition of denaturing agents. Both the kinetic and thermodynamic folding and unfolding involve intermediate states with regard to all unfolding conditions. If allowed to sit at alkaline pH (11.5) for a week, the protein does not return to its folding state when the solvent is switched back to neutral pH. It rather adopts a misfolded state that is prone to aggregation via domain swapping. On the surface of cardiolipin containing liposomes, the protein can adopt a variety of partially unfolded states. Apparently, ferricytochrome c can perform biological functions even if it is only partially folded.

The role of key residues in structure, function, and stability of cytochrome-c

Cytochrome-c (cyt-c), a multi-functional protein, plays a significant role in the electron transport chain, and thus is indispensable in the energy-production process. Besides being an important component in apoptosis, it detoxifies reactive oxygen species. Two hundred and eighty-five complete amino acid sequences of cyt-c from different species are known. Sequence analysis suggests that the number of amino acid residues in most mitochondrial cyts-c is in the range 104 ± 10, and amino acid residues at only few positions are highly conserved throughout evolution. These highly conserved residues are Cys14, Cys17, His18, Gly29, Pro30, Gly41, Asn52, Trp59, Tyr67, Leu68, Pro71, Pro76, Thr78, Met80, and Phe82. These are also known as "key residues", which contribute significantly to the structure, function, folding, and stability of cyt-c. The three-dimensional structure of cyt-c from ten eukaryotic species have been determined using X-ray diffraction studies. Structure analysis suggests that the tertiary structure of cyt-c is almost preserved along the evolutionary scale. Furthermore, residues of N/C-terminal helices Gly6, Phe10, Leu94, and Tyr97 interact with each other in a specific manner, forming an evolutionary conserved interface. To understand the role of evolutionary conserved residues on structure, stability, and function, numerous studies have been performed in which these residues were substituted with different amino acids. In these studies, structure deals with the effect of mutation on secondary and tertiary structure measured by spectroscopic techniques; stability deals with the effect of mutation on T m (midpoint of heat denaturation), ∆G D (Gibbs free energy change on denaturation) and folding; and function deals with the effect of mutation on electron transport, apoptosis, cell growth, and protein expression. In this review, we have compiled all these studies at one place. This compilation will be useful to biochemists and biophysicists interested in understanding the importance of conservation of certain residues throughout the evolution in preserving the structure, function, and stability in proteins.

Conformational substates of ferricytochrome c revealed by combined optical absorption and electronic circular dichroism spectroscopy at cryogenic temperature

We have investigated the heterogeneity of the Fe(III)-Met80 linkage of horse heart ferricytochrome c by probing the 695nm charge transfer band with absorption and electronic circular dichroism (ECD) spectroscopy. In order to verify the connection between conformational substates of the Fe(III)-Met80 linkage and the 695nm band spectral heterogeneity, we have performed experiments as a function of pH (neutral and acidic) and temperature (room and 20K). At room temperature, the ECD spectrum is blue shifted with respect to the absorption one; the shift is more pronounced at acidic pH and is compatible with the presence of sub-bands. ECD measurements at 20K highlighted the heterogeneous nature of the 695nm band and provided direct experimental evidence for the presence of sub-bands. Indeed, while the absorption spectra remained deceivingly unstructured, the ECD spectra showed well resolved peaks and shoulders. A consistent fit of the 20K absorption and ECD spectra showed that five Gaussians (each centered at the same frequency in the absorption and ECD spectrum) are able to reproduce the observed lineshapes. A careful analysis of frequency shifts and intensity ratios of these sub-bands enabled us to identify at least three distinct sub-bands arising from taxonomic conformational substates of the Fe(III)-Met80 linkage. In view of the major influence of the Fe(III)-Met80 linkage on the redox potential of ferricytochrome c, we speculate that these spectrally distinguishable substates may have different functional roles.

Investigations on the Q and CT Bands of Cytochrome c Submonolayer Adsorbed on an Alumina Surface Using Broadband Spectroscopy with Single-Mode Integrated Optical Waveguides

In this work, we report experimental results on the molar absorptivity of cytochrome c adsorbed at different submonolayer levels onto an aluminum oxide waveguide surface; our data show a clear dependence of the protein optical properties on its surface density. The measurements were performed using the broadband, single-mode, integrated optical waveguide spectroscopic technique, which is an extremely sensitive tool able to reach submonolayer levels of detection required for this type of studies. This investigation focuses on the molar absorptivity at the Q-band (centered at 525 nm) and, for the first time to our knowledge, the weak charge transfer (CT) band (centered at 695 nm) of surface-adsorbed cyt c. Polarized light in the spectral region from 450 to 775 nm was all-coupled into an alumina thin film, which functioned as a single-mode planar optical waveguide. The alumina thin-film waveguide used for this work had a thickness of 180 nm and was deposited on a glass substrate by the atomic layer deposition process. The protein submonolayer was formed on the alumina waveguide surface through electrostatic adsorption from an aqueous buffer solution at neutral pH. The optical properties of the surface-adsorbed cyt c were investigated for bulk protein concentrations ranging from 5 nM to 8200 nM in the aqueous buffer solution. For a protein surface density of 2.3 pmol/cm(2), the molar absorptivity measured at the charge transfer band was 335 M(-1) cm(-1), and for a surface density of 15 pmol/cm(2) was 720 M(-1) cm(-1), which is much closer to the value of cyt c dissolved in an aqueous neutral buffer (830 M(-1) cm(-1)). The modification of the protein molar absorptivity and its dependence on the surface density can most likely be attributed to conformational changes of the surface-adsorbed species.

The conformational manifold of ferricytochrome c explored by visible and far-UV electronic circular dichroism spectroscopy

The oxidized state of cytochrome c is a subject of continuous interest, owing to the multitude of conformations which the protein can adopt in solution and on surfaces of artificial and cell membranes. The structural diversity corresponds to a variety of functions in electron transfer, peroxidase and apoptosis processes. In spite of numerous studies, a comprehensive analysis and comparison of native and non-native states of ferricytochrome c has thus far not been achieved. This results in part from the fact that the influence of solvent conditions (i.e., ionic strength, anion concentration, temperature dependence of pH values) on structure, function and equilibrium thermodynamics has not yet been thoroughly assessed. The current study is a first step in this direction, in that it provides the necessary experimental data to compare different non-native states adopted at high temperature and alkaline pH. To this end, we employed visible electronic circular dichroism (ECD) and absorption spectroscopy to probe structural changes of the heme environment in bovine and horse heart ferricytochrome c as a function of temperature between 278 and 363 K at different neutral and alkaline pH values. A careful selection of buffers enabled us to monitor the partial unfolding of the native state at room temperature while avoiding a change to an alkaline state at high temperatures. We found compelling evidence for the existence of a thermodynamic intermediate of the thermal unfolding/folding process, termed III h, which is structurally different from the alkaline states, IV 1 and IV 2, contrary to current belief. At neutral or slightly acidic pH, III h is populated in a temperature region between 320 and 345 K. The unfolded state of the protein becomes populated at higher temperatures. The ECD spectra of the B-bands of bovine and horse heart cytochrome c (pH 7.0) exhibit a pronounced couplet that is maintained below 343 K, before protein unfolding replaces it by a rather strong positive Cotton band. A preliminary vibronic analysis of the B-band profile reveals that the couplet reflects a B-band splitting of 350 cm (-1), which is mostly of electronic origin, due to the internal electric field in the heme cavity. Our results suggest that the conformational transition from the native state, III, into a thermally activated intermediate state, III h, does not substantially affect the internal electric field and causes only moderate rearrangements of the heme pocket, which involves changes, rather than a rupture, of the Fe (3+)-M80 linkage. In the unfolded state, as well as in the alkaline states IV and V, the band splitting is practically eliminated, but the positive Cotton effect observed for the B-band suggests that the proximal environment, encompassing H18 and the two cysteine residues 14 and 17, is most likely still intact and covalently bound to the heme chromophore. Both alkaline states IV and V were found to melt via intermediate states. Unfolded states probed at neutral and alkaline pH can be discriminated, owing to the different intensities of the Cotton bands of the respective B-band transitions. Differences between the ECD intensities of the B-bands of the different unfolded states and alkaline states most likely reflect different degrees of openness of the corresponding heme crevice.

Structural changes of horse heart ferricytochrome C induced by changes of ionic strength and anion binding

To test the validity of the notion that changes in ionic strength and ion binding do not cause any major functionally relevant structural changes in cytochrome c, we measured the absorption and electronic circular dichroism (ECD) of horse heart ferricytochrome c for the Soret and 695 nm charge-transfer band as a function of dihydrogen phosphate and sodium acetate concentrations. This band is known to probe the integrity of the functionally pivotal Fe3+-M80 linkage. Spectral changes indicate that an ionic strength increase (via an increasing acetate ion concentration) affects only a subset of conformational substates of the Fe-M80 interface, probed by the 695 nm charge-transfer band, without a substantial modification of the heme environment. This result suggests that the substates probed by the 695 nm band differ with respect to their capability to transduce changes of solvent-protein interactions to the active site. The binding of H2PO4- ions causes more significant structural changes, which give rise to a large increase of the oscillator strength of the 695 nm band. This reflects a strengthening of the Fe-M80 bond in all substates, which probably destabilizes the oxidized state but stabilizes the folded state of the protein. Additional structural variations are likely to involve aromatic side chains, such as F82 and W59, and the hydrogen-bonding network in the heme pocket. In contrast to the current belief that anion binding to the binding domain of the protein for cytochrome c oxidase does not cause any functionally relevant structural changes, our results show that the structural variations that occur in the heme pocket are most likely of functional significance.

Computational study of the release of H2 from ammonia borane dimer (BH3NH3)2 and its ion pair isomers

High-level electronic structure calculations have been used to map out the relevant portions of the potential energy surfaces for the release of H2 from dimers of ammonia borane, BH3NH3 (AB). Using the correlation-consistent aug-cc-pVTZ basis set at the second-order perturbation MP2 level, geometries of stationary points were optimized. Relative energies were computed at these points using coupled-cluster CCSD(T) theory with the correlation-consistent basis sets at least up to the aug-cc-pVTZ level and in some cases extrapolated to the complete basis set limit. The results show that there are a number of possible dimers involving different types of hydrogen-bonded interactions. The most stable gaseous phase (AB)2 dimer results from a head-to-tail cyclic conformation and is stabilized by 14.0 kcal/mol with respect to two AB monomers. (AB)2 can generate one or two H2 molecules via several direct pathways with energy barriers ranging from 44 to 50 kcal/mol. The diammoniate of diborane ion pair isomer, [BH4-][NH3BH2NH3+] (DADB), is 10.6 kcal/mol less stable than (AB)2 and can be formed from two AB monomers by overcoming an energy barrier of approximately 26 kcal/mol. DADB can also be generated from successive additions of two NH3 molecules to B2H6 and from condensation of AB with separated BH3 and NH3 molecules. The pathway for H2 elimination from DADB is characterized by a smaller energy barrier of 20.1 kcal/mol. The alternative ion pair [NH4+][BH3NH2BH3-] is calculated to be 16.4 kcal/mol above (AB)2 and undergoes H2 release with an energy barrier of 17.7 kcal/mol. H2 elimination from both ion pair isomers yields the chain BH3NH2BH2NH3 as product. Our results suggest that the neutral dimer will play a minor role in the release of H2 from ammonia borane, with a dominant role from the ion pairs as observed experimentally in ionic liquids and the solid state.

Heats of Formation of Boron Hydride Anions and Dianions and Their Ammonium Salts [BnHmy-][NH4+]y with y = 1−2

Thermochemical parameters of the closo boron hydride BnHn2- dianions, with n=5-12, the B3H8- and B11H14- anions, and the B5H9 and B10H14 neutral species were predicted by high-level ab initio electronic structure calculations. Total atomization energies obtained from coupled-cluster CCSD(T)/complete basis set (CBS) extrapolated energies, plus additional corrections were used to predict the heats of formation of the simplest BnHmy- species in the gas phase in kcal/mol at 298 K: DeltaHf(B3H8-)=-23.1+/-1.0; DeltaHf(B5H52-)=119.4+/-1.5; DeltaHf(B6H62-)=64.1+/-1.5; and DeltaHf(B5H9)=24.1+/-1.5. The heats of formation of the larger species were evaluated by the G3 method from hydrogenation reactions (values at 298 K, in kcal/mol with estimated error bars of+/-3 kcal/mol): DeltaHf(B7H72-)=51.8; DeltaHf(B8H82-)=46.1; DeltaHf(B9H92-)=24.4; DeltaHf(B10H102-)=-12.5; DeltaHf(B11H112-)=-11.8; DeltaHf(B12H122-)=-86.3; DeltaHf(B11H14-)=-57.3; and DeltaHf(B10H14)=18.7. A linear correlation between atomization energies of the dianions and energies of the BH units was found. The heats of formation of the ammonium salts of the anions and dianions were predicted using lattice energies (UL) calculated from an empirical expression based on ionic volumes. The UL values (0 K) of the BnHn2- dianions range from 319 to 372 kcal/mol. The values of UL for the B3H8- and B11H14- anions are 113 and 135 kcal/mol, respectively. The calculated lattice energies and gas-phase heats of formation of the constituent ions were used to predict the heats of formation of the ammonium crystal salts [BnHmy-][NH4+]y. These results were used to evaluate the thermodynamics of the H2 release reactions from the ammonium hydro-borate salts.