Intramolecular Vibrational Force Fields for Linear Carbon Chains through an Adaptative Linear Scaling Scheme

Impact of Halogen Termination and Chain Length on π-Electron Conjugation and Vibrational Properties of Halogen-Terminated Polyynes

We explored the optoelectronic and vibrational properties of a new class of halogen-terminated carbon atomic wires in the form of polyynes using UV-vis, infrared absorption, Raman spectroscopy, X-ray single-crystal diffraction, and DFT calculations. These polyynes terminate on one side with a cyanophenyl group and on the other side, with a halogen atom X (X = Cl, Br, I). We focus on the effect of different halogen terminations and increasing lengths (i.e., 4, 6, and 8 sp-carbon atoms) on the π-electron conjugation and the electronic structure of these systems. The variation in the sp-carbon chain length is more effective in tuning these features than changing the halogen end group, which instead leads to a variety of solid-state architectures. Shifts between the vibrational frequencies of samples in crystalline powders and in solution reflect intermolecular interactions. In particular, the presence of head-to-tail dimers in the crystals is responsible for the modulation of the charge density associated with the π-electron system, and this phenomenon is particularly important when strong I··· N halogen bonds occur.

Electron-phonon coupling and vibrational properties of size-selected linear carbon chains by resonance Raman scattering

UV resonance Raman spectroscopy of size-selected linear sp-carbon chains unveils vibrational overtones and combinations up to the fifth order. Thanks to the tunability of the synchrotron source, we excited each H-terminated polyyne (HC_nH with n = 8,10,12) to the maxima of its vibronic absorption spectrum allowing us to precisely determine the electronic and vibrational structure of the ground and excited states for the main observed vibrational mode. Selected transitions are shown to enhance specific overtone orders in the Raman spectrum in a specific way that can be explained by a simple analytical model based on Albrecht's theory of resonance Raman scattering. The determined Huang-Rhys factors indicate a strong and size-dependent electron-phonon coupling increasing with the sp-carbon chain length.

Vibrational properties of graphdiynes as 2D carbon materials beyond graphene

Two-dimensional (2D) hybrid sp–sp² carbon systems are an appealing subject for science and technology. For these materials, topology and structure significantly affect electronic and vibrational properties. We investigate here by periodic density-functional theory (DFT) calculations the Raman and IR spectra of 2D carbon crystals belonging to the family of graphdiynes (GDYs) and having different structures and topologies. By joining DFT calculations with symmetry analysis, we assign the IR and Raman modes in the spectra of all the investigated systems. On this basis, we discuss how the modulation of the Raman and IR active bands depends on the different interactions between sp and sp² domains. The symmetry-based classification allows identifying the marker bands sensitive to the different peculiar topologies. These results show the effectiveness of vibrational spectroscopy for the characterization of new nanostructures, deepening the knowledge of the subtle interactions that take place in these 2D materials.

Raman and IR spectra investigation of 2D carbon crystals belonging to the family of graphdiynes (GDYs) and having different structures is performed in this paper, focusing on how these spectra are affected by different topological features.

Optical Spectra of Oligofurans: A Theoretical Approach to the Transition Energies, Reorganization Energies, and the Vibronic Activity

There is experimental evidence of high vibronic activity that accompanies the allowed transition between the ground state and the lowest electronic singlet excited state of oligofurans that contain two, three, and four furan rings. The absorption and emission spectra of the three lowest oligofurans measured at liquid nitrogen temperature show distinct fine structures that are reproduced using the projection-based model of vibronic coupling (with Dushinsky rotation included) parameterized utilizing either Density Functional Theory (DFT, with several different exchange-correlation functionals) or ab initio (CC2) quantum chemistry calculations. Using as a reference the experimental data concerning the electronic absorption and fluorescence for the eight lowest oligofurans, we first analyzed the performance of the exchange-correlation functionals for the electronic transition energies and the reorganization energies. Subsequently, we used the best functionals alongside with the CC2 method to explore how the reorganization energies are distributed among the totally symmetric vibrations, identify the normal modes that dominate in the fine structures present in the absorption and emission bands, and trace their evolution with the increasing number of rings in the oligofuran series. Confrontation of the simulated spectra with the experiment allows for the verification of the performance of the selected DFT functionals and the CC2 method.

Structure modulated charge transfer in carbon atomic wires

sp-Hybridized carbon atomic wires are appealing systems with large property tunability. In particular, their electronic properties are intimately related to length, structure, and type of functional end-groups as well as to other effects such as the intermolecular charge transfer with metal nanoparticles. Here, by a combined Raman, Surface Enhanced Raman Scattering (SERS) investigation and first principles calculations of different N,N-dimethylanilino-terminated polyynes, we suggest that, upon charge transfer interaction with silver nanoparticles, the function of sp-carbon atomic wire can change from electron donor to electron acceptor by increasing the wire length. In addition, the insertion into the wire of a strong electrophilic group (1,1,4,4-tetracyanobuta-1,3-diene-2,3-diyl) changes the electron-accepting molecular regions involved in this intermolecular charge transfer. Our results indicate that carbon atomic wires could display a tunable charge transfer between the sp-wire and the metal, and hold promise as active materials in organic optoelectronics and photovoltaics.

Preparation of long linear carbon chain inside multi-walled carbon nanotubes by cooling enhanced hydrogen arc discharge method

Long linear carbon chains with sp hybridization inside multi-walled carbon nanotubes (LLCC@MWCNTs) can be prepared in the cathode deposits obtained by hydrogen arc discharge. In this work, a cooling system was introduced into the hydrogen arc discharge method to improve the growth yield of LLCC@MWCNTs samples, as indicated by the corresponding stronger Raman peaks between 1780 cm-1 and 1880 cm-1, compared with conventional systems. Moreover, the cooling largely expanded the narrow scope of suitable conditions for the preparation of LLCC@MWCNTs, and high purity samples were easily produced. Qualitative analysis of arc discharge process helped conclude that cooling helps to increase the temperature of arc plasma, which is beneficial to improve both the growth yield of LLCC@MWCNTs and the purity of MWCNTs. This work provides a new approach to improve the growth yield of LLCC@MWCNTs and will benefit further studies and future applications of this new one-dimensional allotrope.

Confined linear carbon chains as a route to bulk carbyne

Strong chemical activity and extreme instability in ambient conditions characterize carbyne, an infinite sp(1) hybridized carbon chain. As a result, much less has been explored about carbyne as compared to other carbon allotropes such as fullerenes, nanotubes and graphene. Although end-capping groups can be used to stabilize carbon chains, length limitations are still a barrier for production, and even more so for application. We report a method for the bulk production of long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. The synthesis of very long arrangements is confirmed by a combination of transmission electron microscopy, X-ray diffraction and (near-field) resonance Raman spectroscopy. Our results establish a route for the bulk production of exceptionally long and stable chains composed of more than 6,000 carbon atoms, representing an elegant forerunner towards the final goal of carbyne's bulk production.

Carbon-atom wires: 1-D systems with tunable properties

This review provides a discussion of the current state of research on linear carbon structures and related materials based on sp-hybridization of carbon atoms (polyynes and cumulenes). We show that such systems have widely tunable properties and thus represent an intriguing and mostly unexplored field for both fundamental and applied sciences. We discuss the rich interplay between the structural, vibrational, and electronic properties focusing on recent advances and the future perspectives of carbon-atom wires and novel hybrid sp-sp(2)-carbon architectures.

Raman spectroscopy as a tool to investigate the structure and electronic properties of carbon-atom wires

Graphene, nanotubes and other carbon nanostructures have shown potential as candidates for advanced technological applications due to the different coordination of carbon atoms and to the possibility of π-conjugation. In this context, atomic-scale wires comprised of sp-hybridized carbon atoms represent ideal 1D systems to potentially downscale devices to the atomic level. Carbon-atom wires (CAWs) can be arranged in two possible structures: a sequence of double bonds (cumulenes), resulting in a 1D metal, or an alternating sequence of single-triple bonds (polyynes), expected to show semiconducting properties. The electronic and optical properties of CAWs can be finely tuned by controlling the wire length (i.e., the number of carbon atoms) and the type of termination (e.g., atom, molecular group or nanostructure). Although linear, sp-hybridized carbon systems are still considered elusive and unstable materials, a number of nanostructures consisting of sp-carbon wires have been produced and characterized to date. In this short review, we present the main CAW synthesis techniques and stabilization strategies and we discuss the current status of the understanding of their structural, electronic and vibrational properties with particular attention to how these properties are related to one another. We focus on the use of vibrational spectroscopy to provide information on the structural and electronic properties of the system (e.g., determination of wire length). Moreover, by employing Raman spectroscopy and surface enhanced Raman scattering in combination with the support of first principles calculations, we show that a detailed understanding of the charge transfer between CAWs and metal nanoparticles may open the possibility to tune the electronic structure from alternating to equalized bonds.

Synthesis and transformation of linear adamantane assemblies inside carbon nanotubes

We report the assembly and thermal transformation of linear diamondoid assemblies inside carbon nanotubes. Our calculations and observations indicate that these molecules undergo selective reactions within the narrow confining space of a carbon nanotube. Upon vacuum annealing of adamantane molecules encapsulated in a carbon nanotube, we observe a sharp Raman feature at 1857 cm(-1), which we interpret as a stretching mode of carbon chains formed by thermal conversion of adamantane inside a carbon nanotube. Introduction of pure hydrogen during thermal annealing, however, suppresses the formation of carbon chains and seems to keep adamantane intact.

Energetics of linear carbon chains in one-dimensional restricted environment

The energetics of even and odd linear C(n) carbon chain clusters are investigated by hybrid density functional theory (DFT) calculations. These molecular species are especially interesting due to their recent observation inside carbon nanotubes by polarized resonant Raman spectroscopy and high-resolution transmission electron microscopy (HRTEM) by different research groups. Neutral, anionic and dianionic carbon chains were studied with sizes up to n=75, although most presented calculations are limited to n<or= 24. Aggregation into longer chains is favored for neutral and anionic chains of any size. The barrier to aggregation of 2C(n)<-->C(2n) is of the order of 40-20 kcal mol(-1), which gradually decreases with increasing chain size, n. These barriers can be overcome during the high temperature synthesis or annealing conditions, but not when cooled down for the HRTEM and Raman experiments. Therefore, in addition to the already observed long chains also shorter chains should be observable under appropriate conditions inside carbon nanotubes.