Real-Space Transmission Electron Microscopy Investigations of Attachment of Functionalized Magnetic Nanoparticles to DNA-Coils Acting as a Biosensor

Cooperative dynamics of DNA-grafted magnetic nanoparticles optimize magnetic biosensing and coupling to DNA origami

Magnetic nanoparticles (MNPs) provide new opportunities for enzyme-free biosensing of nucleic acid biomarkers and magnetic actuation by patterning on DNA origami, yet how the DNA grafting density affects their dynamics and accessibility remains poorly understood. Here, we performed surface functionalization of MNPs with single-stranded DNA (ssDNA) via click chemistry with a tunable grafting density, which enables the encapsulation of single MNPs inside a functional polymeric layer. We used several complementary methods to show that particle translational and rotational dynamics exhibit a sigmoidal dependence on the ssDNA grafting density. At low densities, ssDNA strands adopt a coiled conformation that results in minor alterations to particle dynamics, while at high densities, they organize into polymer brushes that collectively influence particle dynamics. Intermediate ssDNA densities, where the dynamics are most sensitive to changes, show the highest magnetic biosensing sensitivity for the detection of target nucleic acids. Finally, we demonstrate that MNPs with high ssDNA grafting densities are required to efficiently couple to DNA origami. Our results establish ssDNA grafting density as a critical parameter for the functionalization of MNPs for magnetic biosensing and functionalization of DNA nanostructures.

Magnetic DNA Nanomachine for On-Particle Cascade Amplification-Based Ferromagnetic Resonance Detection of Plant MicroRNA

Plant microRNAs play critical roles in post-transcriptional gene regulation of many processes, thus motivating the development of accurate and user-friendly microRNA detection methods for better understanding of, e.g., plant growth, development, and abiotic/biotic stress responses. By integrating the capture probe, fuel strand, primer, and template onto the surface of a magnetic nanoparticle (MNP), we demonstrated a magnetic DNA nanomachine that could conduct an on-particle cascade amplification reaction in response to the presence of target microRNA. The cascade amplification consists of an exonuclease III-assisted target recycling step and a rolling circle amplification step, leading to changes in the MNP arrangement that can be quantified by ferromagnetic resonance spectroscopy. After a careful investigation of the exonuclease III side reaction, the biosensor offers a detection limit of 15 fM with a total assay time of ca. 70 min. Moreover, our magnetic DNA nanomachine is capable of discriminating the target microRNA from its family members. Our biosensor has also been tested on total endogenous microRNAs extracted from Arabidopsis thaliana leaves, with a performance comparable to qRT-PCR.

Nucleic acid amplification strategies for volume-amplified magnetic nanoparticle detection assay

Magnetic nanoparticles (MNPs) can be quantified based on their magnetic relaxation properties by volumetric magnetic biosensing strategies, for example, alternating current susceptometry. Volume-amplified magnetic nanoparticle detection assays (VAMNDAs) employ analyte-initiated nucleic acid amplification (NAA) reactions to increase the hydrodynamic size of MNP labels for magnetic sensing, achieving attomolar to picomolar detection limits. VAMNDAs offer rapid and user-friendly analysis of nucleic acid targets but present inherence defects determined by the chosen amplification reactions and sensing principles. In this mini-review, we summarize more than 30 VAMNDA publications and classify their detection models for NAA-induced MNP size increases, highlighting the performances of different linear, cascade, and exponential NAA strategies. For some NAA strategies that have not yet been reported in VAMNDA, we predicted their performances based on the reaction kinetics and feasible detection models. Finally, challenges and perspectives are given, which may hopefully inspire and guide future VAMNDA studies.

Insights into the Formation of DNA-Magnetic Nanoparticle Hybrid Structures: Correlations between Morphological Characterization and Output from Magnetic Biosensor Measurements

Understanding the binding mechanism between probe-functionalized magnetic nanoparticles (MNPs) and DNA targets or amplification products thereof is essential in the optimization of magnetic biosensors for the detection of DNA. Herein, the molecular interaction forming hybrid structures upon hybridization between DNA-functionalized magnetic nanoparticles, exhibiting Brownian relaxation, and rolling circle amplification products (DNA-coils) is investigated by the use of atomic force microscopy in a liquid environment and magnetic biosensors measuring the frequency-dependent magnetic response and the frequency-dependent modulation of light transmission. This approach reveals the qualitative and quantitative correlations between the morphological features of the hybrid structures with their magnetic response. The suppression of the high-frequency peak in the magnetic response and the appearance of a new peak at lower frequencies match the formation of larger sized assemblies upon increasing the concentration of DNA-coils. Furthermore, an increase of the DNA-coil concentration induces an increase in the number of MNPs per hybrid structure. This study provides new insights into the DNA–MNP binding mechanism, and its versatility is of considerable importance for the mechanistic characterization of other DNA-nanoparticle biosensor systems.

Homogeneous circle-to-circle amplification for real-time optomagnetic detection of SARS-CoV-2 RdRp coding sequence

Circle-to-circle amplification (C2CA) is a specific and precise cascade nucleic acid amplification method consisting of more than one round of padlock probe ligation and rolling circle amplification (RCA). Although C2CA provides a high amplification efficiency with a negligible increase of false-positive risk, it contains several step-by-step operation processes. We herein demonstrate a homogeneous and isothermal nucleic acid quantification strategy based on C2CA and optomagnetic analysis of magnetic nanoparticle (MNP) assembly. The proposed homogeneous circle-to-circle amplification eliminates the need for additional monomerization and ligation steps after the first round of RCA, and combines two amplification rounds in a one-pot reaction. The second round of RCA produces amplicon coils that anneal to detection probes grafted onto MNPs, resulting in MNP assembly that can be detected in real-time using an optomagnetic sensor. The proposed methodology was applied for the detection of a synthetic complementary DNA of SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2, also known as 2019-nCoV) RdRp (RNA-dependent RNA polymerase) coding sequence, achieving a detection limit of 0.4 fM with a dynamic detection range of 3 orders of magnitude and a total assay time of ca. 100 min. A mathematical model was set up and validated to predict the assay performance. Moreover, the proposed method was specific to distinguish SARS-CoV and SARS-CoV-2 sequences with high similarity.

Rolling circle amplification-mediated in situ synthesis of palladium nanoparticles for the ultrasensitive electrochemical detection of microRNA

Herein, an ultrasensitive and label-free electrochemical biosensor was developed for microRNA (miRNA) based on rolling circle amplification (RCA)-mediated palladium nanoparticles (PdNPs). The sensor was fabricated by immobilizing dual-functionalized hairpin probes onto an electrode. The specific recognition of target miRNA-21 by the hairpin probes could trigger the RCA reaction, which produced numerous guanine (G)-rich long single-stranded DNAs (ssDNAs). Based on the interaction of the Pd^II species with the nitrogen atoms of the G bases, these G-rich long ssDNAs served as specific templates in the in situ synthesis of massive PdNPs as electrochemical indicators. The formation of PdNPs was demonstrated to be exactly along the RCA products by high-resolution transmission electron microscopy. Using this cascade signal amplification strategy, the developed biosensor achieved a linear range of 50 aM-100 fM with an ultralow detection limit of 8.6 aM miRNA-21. Furthermore, the developed biosensor exhibited good selectivity, reproducibility, stability and satisfactory feasibility for miRNA-21 detection in human serum samples; this ensured significant potential of this biosensor in disease diagnosis and prognosis applications.

Functionalized magnetic nanoparticles attenuate cancer cells proliferation: Transmission electron microscopy analysis

The penetration and transportation of nanoparticles (NPs) inside the cancer cells is critical to study. In this article, cancer cells (HCT-116) were treated with functionalized magnetic NPs for the period of 48 hr and studied their ultrastructure by transmission electron microscopy (TEM). The NPs-treated cells were prepared by chemical fixation and sliced into electron-transparent arbitrary sections (200 × 200 μm² ) by ultramicrotome. Major events of NPs-cell interaction, such as penetration of NPs, encapsulation of NPs into the intracellular compartments, transportation of NPs, and NPs exit, were examined by TEM to understand the mechanism of cell death. The NPs showed the uniform spherical shape with broad size distribution (100-400 nm), while cells displayed irregular morphology with average diameter ~5 μm. Our results showed the successful penetration of NPs deep into the cell, encapsulation, transportation, and exocytosis. Furthermore, we tested the different concentrations (0, 1.5, 12.5, and 50 μg/ml) of NPs on cancer cells and evaluated the cell viability. Laser confocal microscopy and colorimetric analysis together demonstrated that the cell viability is a dose-dependent phenomenon, where 50 μg/ml specimen showed the highest killing of cancer cells compared to other dosages.

Detection of the Malaria causing Plasmodium Parasite in Saliva from Infected Patients using Topoisomerase I Activity as a Biomarker

Malaria is among the major threats to global health with the main burden of disease being in rural areas of developing countries where accurate diagnosis based on non-invasive samples is in high demand. We here present a novel molecular assay for detection of malaria parasites based on technology that may be adapted for low-resource settings. Moreover, we demonstrate the exploitation of this assay for detection of malaria in saliva. The setup relies on pump-free microfluidics enabled extraction combined with a DNA sensor substrate that is converted to a single-stranded DNA circle specifically by topoisomerase I expressed by the malaria causing Plasmodium parasite. Subsequent rolling circle amplification of the generated DNA circle in the presence of biotin conjugated deoxynucleotides resulted in long tandem repeat products that was visualized colorimetrically upon binding of horse radish peroxidase (HRP) and addition of 3,3′,5,5′-Tetramethylbenzidine that was converted to a blue colored product by HRP. The assay was directly quantitative, specific for Plasmodium parasites, and allowed detection of Plasmodium infection in a single drop of saliva from 35 out of 35 infected individuals tested. The results could be determined directly by the naked eye and documented by quantifying the color intensity using a standard paper scanner.

Volume-amplified magnetic bioassay integrated with microfluidic sample handling and high-Tc SQUID magnetic readout

A bioassay based on a high-T_c superconducting quantum interference device (SQUID) reading out functionalized magnetic nanoparticles (fMNPs) in a prototype microfluidic platform is presented. The target molecule recognition is based on volume amplification using padlock-probe-ligation followed by rolling circle amplification (RCA). The MNPs are functionalized with single-stranded oligonucleotides, which give a specific binding of the MNPs to the large RCA coil product, resulting in a large change in the amplitude of the imaginary part of the ac magnetic susceptibility. The RCA products from amplification of synthetic Vibrio cholera target DNA were investigated using our SQUID ac susceptibility system in microfluidic channel with an equivalent sample volume of 3 μl. From extrapolation of the linear dependence of the SQUID signal versus concentration of the RCA coils, it is found that the projected limit of detection for our system is about 1.0 × 10⁵ RCA coils (0.2 × 10⁻¹⁸ mol), which is equivalent to 66 fM in the 3 μl sample volume. This ultra-high magnetic sensitivity and integration with microfluidic sample handling are critical steps towards magnetic bioassays for rapid detection of DNA and RNA targets at the point of care.

Interlinked DNA nano-circles for measuring topoisomerase II activity at the level of single decatenation events

DNA nano-structures present appealing new means for monitoring different molecules. Here, we demonstrate the assembly and utilization of a surface-attached double-stranded DNA catenane composed of two intact interlinked DNA nano-circles for specific and sensitive measurements of the life essential topoisomerase II (Topo II) enzyme activity. Topo II activity was detected via the numeric release of DNA nano-circles, which were visualized at the single-molecule level in a fluorescence microscope upon isothermal amplification and fluorescence labeling. The transition of each enzymatic reaction to a micrometer sized labeled product enabled quantitative detection of Topo II activity at the single decatenation event level rendering activity measurements in extracts from as few as five cells possible. Topo II activity is a suggested predictive marker in cancer therapy and, consequently, the described highly sensitive monitoring of Topo II activity may add considerably to the toolbox of individualized medicine where decisions are based on very sparse samples.

On-slide detection of enzymatic activities in selected single cells

With increasing recognition of the importance in addressing cell-to-cell heterogeneity for the understanding of complex biological systems, there is a growing need for assays capable of single cell analyses. In the current study, we describe the measurement of human topoisomerase I activity in single CD44 positive Caco2 cells specifically captured from a mixed population on glass slides, which were dual functionalized with anti-CD44-antibodies and specific DNA primers. On-slide lysis of captured CD44 positive cells, resulted in the release of human topoisomerase I, allowing the enzyme to circularize a specific linear DNA substrate added to the slides. The generated circles hybridized to the anchored DNA primers and acted as templates for a solid support rolling circle amplification reaction leading to the generation of long tandem repeat products that were detected at the single molecule level in a fluorescent microscope upon hybridization of fluorescent labelled probes. The on-slide detection system was demonstrated to be directly quantitative and specific towards CD44 positive cells. Moreover, it allowed reproducible detection of human topoisomerase I activity in single cells.

Optimized Detection of Plasmodium falciparum Topoisomerase I Enzyme Activity in a Complex Biological Sample by the Use of Molecular Beacons

The so-called Rolling Circle Amplification allows for amplification of circular DNA structures in a manner that can be detected in real-time using nucleotide-based molecular beacons that unfold upon recognition of the DNA product, which is being produced during the amplification process. The unfolding of the molecular beacons results in a fluorescence increase as the Rolling Circle Amplification proceeds. This can be measured in a fluorometer. In the current study, we have investigated the possibility of using two different molecular beacons to detect two distinct Rolling Circle Amplification reactions proceeding simultaneously and in the same reaction tube by measurement of fluorescence over time. We demonstrate the application of this fluorometric readout method, for automated and specific detection of the activity of the type IB topoisomerase from the malaria parasite Plasmodium falciparum in the presence of human cell extract containing the related topoisomerase I from humans. The obtained results point towards a future use of the presented assay setup for malaria diagnostics or drug screening purposes. In longer terms the method may be applied more broadly for real-time sensing of various Rolling Circle Amplification reactions.

Cascade Signal Amplification Based on Copper Nanoparticle-Reported Rolling Circle Amplification for Ultrasensitive Electrochemical Detection of the Prostate Cancer Biomarker

An ultrasensitive and highly selective electrochemical assay was first attempted by combining the rolling circle amplification (RCA) reaction with poly(thymine)-templated copper nanoparticles (CuNPs) for cascade signal amplification. As proof of concept, prostate specific antigen (PSA) was selected as a model target. Using a gold nanoparticle (AuNP) as a carrier, we synthesized the primer-AuNP-aptamer bioconjugate for signal amplification by increasing the primer/aptamer ratio. The specific construction of primer-AuNP-aptamer/PSA/anti-PSA sandwich structure triggered the effective RCA reaction, in which thousands of tandem poly(thymine) repeats were generated and directly served as the specific templates for the subsequent CuNP formation. The signal readout was easily achieved by dissolving the RCA product-templated CuNPs and detecting the released copper ions with differential pulse stripping voltammetry. Because of the designed cascade signal amplification strategy, the newly developed method achieved a linear range of 0.05-500 fg/mL, with a remarkable detection limit of 0.020 ± 0.001 fg/mL PSA. Finally, the feasibility of the developed method for practical application was investigated by analyzing PSA in the real clinical human serum samples. The ultrasensitivity, specificity, convenience, and capability for analyzing the clinical samples demonstrate that this method has great potential for practical disease diagnosis applications.

Detection of rolling circle amplified DNA molecules using probe-tagged magnetic nanobeads in a portable AC susceptometer

Here, the volume-amplified magnetic nanobead detection assay (VAM-NDA) is for the first time applied for detection of rolling circle amplified (RCA) DNA molecules in a portable, commercial AC susceptometer that operates at ambient temperatures and with an analysis time of about 20 min. The performance of the assay is investigated using three different magnetic nanobead sizes: 50, 130 and 250nm. The performance of the assay using the AC susceptometer is compared to the performance achieved using a superconducting quantum interference device (SQUID). It is found that the performance of the assay is comparable in the two setups with a quantitative detection limit of ∼4pM for all bead sizes under study. The findings show that the VAM-NDA holds promise for future wide-spread implementation in commercial AC susceptometer setups thus opening up for the possibility to perform magnetic bead-based DNA detection in point-of-care and outpatient settings.