Intermolecular Vibrational Spectra of C3v CXY3 Molecular Liquids, CHCl3, CHBr3, CFBr3, and CBrCl3

Study on Reaction Mechanism and Process Safety for Epoxidation

The reaction mechanism and process safety for epoxidation were investigated in this study. 1-(2-Chlorophenyl)-2-(4-fluorophenyl)-3-(1,2,4-triazole) propene (triazolene), a typical representative of high steric olefinic compounds, was chosen as the raw material. In addition, hydrogen peroxide was chosen as the oxygen source in the reaction. Online Raman spectroscopy combined with high-performance liquid chromatography (HPLC) was used for the process monitoring analysis. The results of this study indicated that the epoxidation process is exothermic, and the apparent reaction heat was 1340.0 kJ·kg-1 (measured by the mass of triazolene). The heat conversion rate was 39.7% immediately after hydrogen peroxide dosing to a triazolene and maleic anhydride mixture solution in chloroform. This result indicated that a considerable amount of heat is accumulated during the epoxidation reaction, which leads to a potential high safety concern. The study of the reaction mechanism showed that maleic anhydride reacts with hydrogen peroxide quickly to form maleic acid peroxide, which is controlled by hydrogen peroxide feeding, and the formed maleic acid peroxide further reacts with triazolenes slowly, which is a kinetically controlled reaction. Decomposition kinetics studies revealed that the temperatures corresponding to the time of maximum reaction rate for 8 and 24 h are TD24 = 89.9 °C and TD8 = 104.1 °C, respectively.

Ultrafast supercontinuum generation in halomethane-filled liquid-core fibers

Here, we demonstrate the properties of bromotrichloromethane (CBrCl3) in the context of ultrafast supercontinuum generation in liquid-core fibers. Broadband interferometric and spectroscopic measurements of liquids and fibers indicate suitable optical properties of this halomethane for near-IR supercontinuum generation, which were confirmed in corresponding experiments using ultrashort pulses. The associated simulations showed consistent broadband power redistributions, thus confirming that this halomethane is a suitable candidate for ultrafast nonlinear frequency conversion in liquid-core fibers. It uniquely combines the advantages of an inorganic, i.e., CH-free, material with a non-vanishing hyperpolarizability, allowing to anticipate an integration of second-order nonlinearity into the fiber.

Intermolecular Dynamics of Positively and Negatively Charged Aromatics and Their Isoelectronic Neutral Analogs in Aqueous Solutions

In this study, we investigated the temperature dependence of intermolecular vibrations and orientational dynamics in the aqueous solutions of imidazole hydrochloride, imidazole, sodium triazolide, and triazole using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES) and steady-state Raman spectroscopy. The difference low-frequency Raman spectra under 250 cm-1 of the aqueous solutions relative to the neat water showed that the spectral shoulder in the high-frequency region at 60-100 cm-1, assigned to the libration of an aromatic ring, was higher in frequency for the imidazolium cation but lower for the triazolide anion than those of the respective neutral aromatics. The results of the ab initio quantum chemistry calculations of the clusters of the aromatics and water molecule(s) were consistent with the experimental spectra of the aqueous solutions. Further, the results of the temperature-dependent experiments showed that the signal intensity in the low-frequency region below 50 cm-1 increased for all solutions with an increase in temperature. In contrast, the spectral density in the high-frequency region above 80 cm-1 exhibited almost no shift for the 1.0 M solutions, while a significant red shift was observed for the 5.0 M solutions. In addition, the temperature-dependent densities, viscosities, and surface tensions were characterized for the aqueous aromatic solutions from 293 to 353 K.

Low-Frequency Spectra of 1-Methyl-3-octylimidazolium Tetrafluoroborate Mixtures with Poly(ethylene glycol) by Femtosecond Raman-Induced Kerr Effect Spectroscopy

This is the first report on low-frequency spectra of ionic liquid (IL)/polymer mixtures using femtosecond Raman-induced Kerr effect spectroscopy. We studied mixtures of 1-methyl-3-octylimidazolium tetrafluoroborate ([MOIm][BF₄]) and poly(ethylene glycol) (PEG) with M_n = 400 (PEG400) at various concentrations. To elucidate the unique features of the IL/polymer mixture system, mixtures of PEG400 with a molecular liquid, 1-octhylimidazole (OIm), which is a neutral analog of the cation, were also studied. In addition, mixtures of [MOIm][BF₄] with ethylene glycol (EG) and poly(ethylene glycol) with M_n = 4000 (PEG4000) were also investigated. The first moments of broad low-frequency spectra, mainly due to intermolecular vibrations for the [MOIm][BF₄]/PEG400 and OIm/PEG400, increased slightly with increasing concentration of PEG400, indicating that microscopic intermolecular interactions, in general, are slightly enhanced. We also compared the [MOIm][BF₄] mixtures with EG, PEG400, and PEG4000 at concentrations of 5 and 10 wt % PEG or EG. The low-frequency spectra of samples with the same concentrations were quite similar, but a comparison of the normalized spectra showed that the spectral intensity in the low-frequency region below ∼50 cm^-1 of the [MOIm][BF₄] mixtures with PEG400 and PEG4000 is somewhat lower than that of the [MOIm][BF₄] mixtures with EG. Although the effect of the polymer is small compared to other polymer solution systems, this feature is attributed to a suppression of translational motion in the mixtures of [MOIm][BF₄] with PEG compared to the mixtures of [MOIm][BF₄] with EG due to the greater mass of PEG than EG. Density, surface tension, viscosity, and electrical conductivity were also estimated. From Walden plots, it was found that the [MOIm][BF₄]/PEG4000 system showed more ideal electrical conductive behavior than the [MOIm][BF₄]/PEG400 and [MOIm][BF₄]/EG systems.

Few-layer Black Phosphorous Catalyzes Radical Additions to Alkenes Faster than Low-valence Metals

The substitution of catalytic metals by p-block main elements has a tremendous impact not only in the fundamentals but also in the economic and ecological fingerprint of organic reactions. Here we show that few-layer black phosphorous (FL-BP), a recently discovered and now readily available 2D material, catalyzes different radical additions to alkenes with an initial turnover frequency (TOF0) up to two orders of magnitude higher than representative state-of-the-art metal complex catalysts at room temperature. The corresponding electron-rich BP intercalation compound (BPIC) KP6 shows a nearly twice TOF0 increase with respect to FL-BP. This increase in catalytic activity respect to the neutral counterpart also occurs in other 2D materials (graphene vs. KC8) and metal complex catalysts (Fe0 vs. Fe2- carbon monoxide complexes). This reactive parallelism opens the door for cross-fertilization between 2D materials and metal catalysts in organic synthesis.

Low-Frequency Vibrational Motions of Polystyrene in Carbon Tetrachloride: Comparison with Model Monomer and Dependence on Concentration and Molecular Weight

In this study, the low-frequency vibrational dynamics of polystyrene (PS) in CCl₄ was investigated by femtosecond Raman-induced Kerr effect spectroscopy. Ethylbenzene (EBz) was also investigated as a model monomer of the polymer to elucidate the unique dynamical features of PS in solution. The broadened low-frequency spectrum of the PS/CCl₄ in the frequency region below 150 cm^-1 is significantly different from that of the EBz/CCl₄. Difference spectra between the PS or EBz solutions and neat CCl₄, normalized to an internal vibrational mode of CCl₄, clearly show a much lower spectral intensity for the PS/CCl₄ than the EBz/CCl₄ in the low-frequency region below ca. 20 cm^-1. This indicates that translational motions are suppressed in the PS/CCl₄ compared to the EBz/CCl₄. Moreover, the high-frequency motion at ca. 70 cm^-1, mainly due to phenyl ring librations, occurs at higher frequency in PS (78 cm^-1) than EBz (65 cm^-1). In addition, the results of concentration-dependent experiments show that the first moment (M₁) of the low-frequency difference spectra of both PS/CCl₄ and EBz/CCl₄ is almost independent of the concentration. The molecular weight dependence of the low-frequency spectrum in the PS/CCl₄ shows that the M₁ value of the low-frequency spectral band of PS shifts to higher frequencies when the molecular weight of PS increases up to M_w = ∼1000, which corresponds approximately to the decamer, and then remains constant upon further increasing the molecular weight.

Signatures of Intra- and Intermolecular Vibrational Coupling in Halogenated Liquids Revealed by Two-Dimensional Raman-Terahertz Spectroscopy

Hybrid two-dimensional (2D) Raman-terahertz spectroscopy with the Raman-terahertz-terahertz (RTT) pulse sequence is used to explore the ultrafast intra- and intermolecular degrees of freedom of liquid bromoform (CHBr₃) in the frequency range of 1-8 THz. Cross peaks observed in these 2D spectra are assigned to the coupling between the narrow intramolecular modes of the molecules and the much broader intermolecular degrees of freedom of the liquid. This assignment is based on the frequency position of the cross peaks; however, it is shown that these frequency positions can be deduced accurately only when properly taking into account the convolution of the molecular response with the instrument response function of the experimental setup, the latter of which distorts the 2D spectra considerably. The assignment is supported by additional experiments on diiodomethane (CH₂I₂), which has only one intramolecular mode in the frequency range of the experiment, and hence excludes the possibility of intramolecular couplings.