In Situ IRRAS Studies of Molecular Recognition of Barbituric Acid Lipids to Melamine at the Air–Water Interface

Three-dimensional nanoporous gold/gold nanoparticles substrate for surface-enhanced Raman scattering detection of illegal additives in food

Owing to their nanoscale size and porous structure, both colloidal gold nanoparticles (AuNPs) and nanoporous gold (NPG) have demonstrated good and stable surface-enhanced Raman scattering (SERS) activity, and are therefore widely used as SERS substrates for the rapid detection of various components in food, environmental, biological, and other samples. In this study, we fabricated a novel, sensitive, and reproducible composite three-dimensional (3D) substrate for rapid SERS-based detection of illegal additives in food products. AuNPs and NPGs were prepared by chemical reduction and chemical dealloying methods, with the particle size of AuNPs about 60 nm and the pore size of NPG in the range of 5-36 nm. The AuNPs were then assembled on the surface of NPG to form the composite substrate 3D-NPG/AuNPs, which was characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and other methods. Finally, the new SERS substrate combined with a portable Raman spectrometer was used to detect the illegal food additives 6-benzylaminopurine and melamine, with detection limits of 1 × 10-9 M and 5 × 10-7 M respectively. We further analyzed the relationship between the dealloying time-controlled morphology and the SERS properties of NPG, demonstrating that 3D-NPG/AuNPs as a novel SERS substrate have strong practical application potential in the rapid detection of food additives and other substances.

Plasmonic filter paper for preconcentration, separation and SERS detection harmful chemicals in chili product by fluid flow

We proposed a triple functional SERS substrate by immobilized Ag nanoparticles on the surface of filter paper. The high dense Ag nanoparticles were distributed on the SERS substrate via in-situ growth process. By optimizing the parameter in preparation process, the optimal filter paper SERS substrate was fabricated by using 30 mM of AgNO3 with 20 S growth time. Due to capillary-effect wicking of cellulose fiber, the paper SERS substrate provide simple, fast and pump-free function for transferring analyte onto sharp tip through development of fluid. The fluid flow also brings target concentrate effect within the tip area. Furthermore, the separation feasibility was obtained during the development process of fluid. The preconcentrated effects not only enhanced the SERS signal of analyte, but also improve the fluorescence visible effect. The filter paper SERS substrate was successfully used for separating, concentrating and detecting Sudan dye from chili product, the detection limit could achieve 10-6 M. This study developed a portable, cost-effective and eco-friendly SERS substrate for separating and detecting trace chemical in food.

A Fluorescence-Based Chemical Sensor for Detection of Melamine in Aqueous Solutions

Melamine, an industrial chemical, receives wide attention nowadays because of its unethical usage as a nitrogen enhancer in protein-rich foods and dairy products. Since most of the existing melamine detection methods are highly expensive and time-consuming, high sensitivity biosensor-based detection methods have arisen in the scientific literature as promising alternatives. This study reports the design, synthesis, and fluorescent investigations of a carbazole-based sensor (CB) for the detection of melamine in aqueous solutions. The titration studies and microplate experiments on a CB-cyanuric acid mixture (CB-CA) with melamine suggested that the novel sensor could detect melamine even at very low concentrations in both aqueous solutions and dairy samples.

Comparing C2=O and C2=S Barbiturates: Different Hydrogen-Bonding Patterns of Thiobarbiturates in Solution and the Solid State

Carbonyl-centered hydrogen bonds with various strength and geometries are often exploited in materials to embed dynamic and adaptive properties, with the use of thiocarbonyl groups as hydrogen-bonding acceptors remaining only scarcely investigated. We herein report a comparative study of C2=O and C2=S barbiturates in view of their differing hydrogen bonds, using the 5,5-disubstituted barbiturate B and the thiobarbiturate TB as model compounds. Owing to the different hydrogen-bonding strength and geometries of C2=O vs. C2=S, we postulate the formation of different hydrogen-bonding patterns in C2=S in comparison to the C2=O in conventional barbiturates. To study differences in their association in solution, we conducted concentration- and temperature-dependent NMR experiments to compare their association constants, Gibbs free energy of association ∆Gassn., and the coalescence behavior of the N-H‧‧‧S=C bonded assemblies. In Langmuir films, the introduction of C2=S suppressed 2D crystallization when comparing B and TB using Brewster angle microscopy, also revealing a significant deviation in morphology. When embedded into a hydrophobic polymer such as polyisobutylene, a largely different rheological behavior was observed for the barbiturate-bearing PB compared to the thiobarbiturate-bearing PTB polymers, indicative of a stronger hydrogen bonding in the thioanalogue PTB. We therefore prove that H-bonds, when affixed to a polymer, here the thiobarbiturate moieties in PTB, can reinforce the nonpolar PIB matrix even better, thus indicating the formation of stronger H-bonds among the thiobarbiturates in polymers in contrast to the effects observed in solution.

Simultaneous colorimetric and surface-enhanced Raman scattering detection of melamine from milk

We present a dual-mode readout sensing mechanism that can effectively distinguish true and false-positive signals of melamine in milk by combining colorimetric analysis and surface-enhanced Raman scattering (SERS) spectroscopy. The colorimetry analysis takes advantage of color change of plasmonic nanoparticles upon the presence of melamine. We discovered that Ag colloids with 20 nm diameter was suitable for both colorimetric and SERS methods. However, the colorimetric method may present false-positive signals with the presence of interfering compounds. SERS spectroscopy can overcome this limitation and directly obtain signature spectra from the same plasmonic NPs used for the colorimetric assay without any modification. Melamine/s-triazine can be reliably differentiated by probing the SERS spectra based on surface-selection rules. The limit of detection of sensing melamine from milk by this method could reached to 0.05 ppm. Therefore, the combination of colorimetric and SERS method not only allows for rapid preliminary screening of melamine by naked eyes, but also greatly reduces false-positive signals by surface selection rules in SERS.

Hydrogen Bonds and Molecular Orientations of Supramolecular Structure between Barbituric Acid and Melamine Derivative at the Air/Water Interface Revealed by Heterodyne-Detected Vibrational Sum Frequency Generation Spectroscopy

We studied the supramolecular structure between barbituric acid (pyrimidine-2,4,6(1H,3H,5H)-trione, BA) and an amphiphilic melamine derivative at the air/water interface by heterodyne-detected vibrational sum frequency generation (HD-VSFG) spectroscopy. HD-VSFG measurements in situ showed a positive broad band from 2300 to 2950 cm^-1. By comparing the experimental results with ab initio molecular dynamics (AIMD) simulations, we assigned the broad band to the NH stretching modes of BA strongly hydrogen-bonded to the melamine derivative. In addition, we report in situ HD-VSFG spectra of the interfacial supramolecular structure in the CO stretching region. Two CO stretching bands were identified. On the basis of the signs of the C=O bands, we uniquely determined the orientation of BA. The strong hydrogen bonds and the molecular orientations are direct evidence for the supramolecular structure based on complementary hydrogen bonds at the air/water interface.

Ultra-Sensitive Lab-on-a-Chip Detection of Sudan I in Food using Plasmonics-Enhanced Diatomaceous Thin Film

Sudan I is a carcinogenic compound containing an azo group that has been illegally utilized as an adulterant in food products to impart a bright red color to foods. In this paper, we develop a facile lab-on-a-chip device for instant, ultra-sensitive detection of Sudan I from real food samples using plasmonics-enhanced diatomaceous thin film, which can simultaneously perform on-chip separation using thin layer chromatography (TLC) and highly specific sensing using surface-enhanced Raman scattering (SERS) spectroscopy. Diatomite is a kind of nature-created photonic crystal biosilica with periodic pores and was used both as the stationary phase of the TLC plate and photonic crystals to enhance the SERS sensitivity. The on-chip chromatography capability of the TLC plate was verified by isolating Sudan I in a mixture solution containing Rhodamine 6G, while SERS sensing was achieved by spraying gold colloidal nanoparticles into the sensing spot. Such plasmonics-enhanced diatomaceous film can effectively detect Sudan I with more than 10 times improvement of the Raman signal intensity than commercial silica gel TLC plates. We applied this lab-on-a-chip device for real food samples and successfully detected Sudan I in chili sauce and chili oil down to 1 ppm, or 0.5 ng/spot. This on-chip TLC-SERS biosensor based on diatomite biosilica can function as a cost-effective, ultra-sensitive, and reliable technology for screening Sudan I and many other illicit ingredients to enhance food safety.

Chemical and Biological Sensing Using Diatom Photonic Crystal Biosilica With In-Situ Growth Plasmonic Nanoparticles

In this paper, we described a new type of bioenabled nano-plasmonic sensors based on diatom photonic crystal biosilica with in-situ growth silver nanoparticles and demonstrated label-free chemical and biological sensing based on surface-enhanced Raman scattering (SERs) from complex samples. Diatoms are photosynthetic marine micro-organisms that create their own skeletal shells of hydrated amorphous silica, called frustules, which possess photonic crystal-like hierarchical micro- & nanoscale periodic pores. Our research shows that such hybrid plasmonic-biosilica nanostructures formed by cost-effective and eco-friendly bottom-up processes can achieve ultra-high limit of detection for medical applications, food sensing, water/air quality monitoring and geological/space research. The enhanced sensitivity comes from the optical coupling of the guided-mode resonance of the diatom frustules and the localized surface plasmons of the silver nanoparticles. Additionally, the nanoporous, ultra-hydrophilic diatom biosilica with large surface-to-volume ratio can concentrate more analyte molecules to the surface of the SERS substrates, which can help to detect biomolecules that cannot be easily adsorbed by metallic nanoparticles.

Phase changes in mixed lipid/polymer membranes by multivalent nanoparticle recognition

Selective addressing of membrane components in complex membrane mixtures is important for many biological processes. The present paper investigates the recognition between multivalent surface functionalized nanoparticles (NPs) and amphiphilic block copolymers (BCPs), which are successfully incorporated into lipid membranes. The concept involves the supramolecular recognition between hybrid membranes (composed of a mixture of a lipid (DPPC or DOPC), an amphiphilic triazine-functionalized block copolymer TRI-PEO13-b-PIB83 (BCP 2), and nonfunctionalized BCPs (PEO17-b-PIB87 BCP 1)) with multivalent (water-soluble) nanoparticles able to recognize the triazine end group of the BCP 2 at the membrane surface via supramolecular hydrogen bonds. CdSe-NPs bearing long PEO47-thymine (THY) polymer chains on their surface specifically interacted with the 2,4-diaminotriazine (TRI) moiety of BCP 2 embedded within hybrid lipid/BCP mono- or bilayers. Experiments with GUVs from a mixture of DPPC/BCP 2 confirm selective supramolecular recognition between the THY-functionalized NPs and the TRI-functionalized polymers, finally resulting in the selective removal of BCP 2 from the hybrid vesicle membrane as proven via facetation of the originally round and smooth vesicles. GUVs (composed of DOPC/BCP 2) show that a selective removal of the polymer component from the fluid hybrid membrane results in destruction of hybrid vesicles via membrane rupture. Adsorption experiments with mixed monolayers from lipids with either BCP 2 or BCP 1 (nonfunctionalized) reveal that the THY-functionalized NPs specifically recognize BCP 2 at the air/water interface by inducing significantly higher changes in the surface pressure when compared to monolayers from nonspecifically interacting lipid/BCP 1 mixtures. Thus, recognition of multivalent NPs with specific membrane components of hybrid lipid/BCP mono- and bilayers proves the selective removal of BCPs from mixed membranes, in turn inducing membrane rupture. Such recognition events display high potential in controlling permeability and fluidity of membranes (e.g., in pharmaceutics).

Self-assembly and molecular recognition of adenine- and thymine-functionalized nucleolipids in the mixed monolayers and thymine-functionalized nucleolipids on aqueous melamine at the air-water interface

Self-assembly and molecular recognition of the monolayers composed of an equimolar mixture of adenine- and thymine-functionalized nucleolipids at the air-water interface have been investigated in detail using surface pressure-molecular area isotherms and in situ infrared reflection absorption spectroscopy (IRRAS). Prior to molecular recognition, the adenine moieties in the monolayer were almost oriented on an end-on mode through π-stacking and hydrogen bonding interactions, and the C-C-C planes of the alkyl chains were preferentially oriented perpendicular to the water surface, while the thymine moieties in the monolayer were involved in hydrogen bonding almost with a flat-on orientation. On aqueous subphases containing complementary bases, no significant molecular recognition was observed for the monolayers of individual nucleolipids. In the monolayer of equimolar mixture, molecular recognition occurred between the adenine and thymine moieties through hydrogen bonding probably with the development of cyclic structures of adenine-thymine-adenine-thymine quartets. Although molecular recognition between the monolayer of thymine-functionalized nucleolipids and aqueous melamine took place through triple hydrogen bonds, no melamine binding to the monolayer of equimolar mixture was observed, which reflects the formation of the quartets in the mixed monolayers at the air-water interface. FTIR and small-angle X-ray diffraction (XRD) results of the corresponding Langmuir-Blodgett films support the hydrogen bonding recognition and molecular orientation.