Effects of Interaction of Ionic and Nonionic Surfactants on Self-Assembly of PEO–PPO–PEO Triblock Copolymer in Aqueous Solution

Development of Polyurethane/Peptide-Based Carriers with Self-Healing Properties

In situ-forming gels with self-assembling and self-healing properties are materials of high interest for various biomedical applications, especially for drug delivery systems and tissue regeneration. The main goal of this research was the development of an innovative gel carrier based on dynamic inter- and intramolecular interactions between amphiphilic polyurethane and peptide structures. The polyurethane architecture was adapted to achieve the desired amphiphilicity for self-assembly into an aqueous solution and to facilitate an array of connections with peptides through physical interactions, such as hydrophobic interactions, dipole-dipole, electrostatic, π–π stacking, or hydrogen bonds. The mechanism of the gelation process and the macromolecular conformation in water were evaluated with DLS, ATR-FTIR, and rheological measurements at room and body temperatures. The DLS measurements revealed a bimodal distribution of small (~30–40 nm) and large (~300–400 nm) hydrodynamic diameters of micelles/aggregates at 25 °C for all samples. The increase in the peptide content led to a monomodal distribution of the peaks at 37 °C (~25 nm for the sample with the highest content of peptide). The sol–gel transition occurs very quickly for all samples (within 20–30 s), but the equilibrium state of the gel structure is reached after 1 h in absence of peptide and required more time as the content of peptide increases. Moreover, this system presented self-healing properties, as was revealed by rheological measurements. In the presence of peptide, the structure recovery after each cycle of deformation is a time-dependent process, the recovery is complete after about 300 s. Thus, the addition of the peptide enhanced the polymer chain entanglement through intermolecular interactions, leading to the preparation of a well-defined gel carrier. Undoubtedly, this type of polyurethane/peptide-based carrier, displaying a sol–gel transition at a biologically relevant temperature and enhanced viscoelastic properties, is of great interest in the development of medical devices for minimally invasive procedures or precision medicine.

Ionic Liquids Mediated Micellization of Pluronic Copolymers: Aggregation Behavior of Amphiphilic Triblock Copolymers

Understanding the micellization of amphiphilic triblock copolymers, especially Pluronics can play a persuasive role in engineering "smart" formulations for drug delivery applications. Their underlying self-assembly in the presence of designer solvents such as ionic liquids (ILs) provides combinatorial benefits of unique munificent properties of ILs and copolymers. The complex molecular interactions in the Pluronic copolymers/ILs mixed system influence the aggregation mechanism of copolymers depending on various aspects with no standardized factors to govern the structure-property relationship, which led to the practical applications. Here, we summarized recent progress in understanding the micellization process of IL-Pluronic mixed systems. Special emphasis was given to pure Pluronic systems (i.e., PEO-PPO-PEO) without any structural modifications, such as copolymerization with other functional groups, and ILs having cholinium and imidazolium groups. We expect that the correlation between existing/developing experimental and theoretical studies will provide the necessary basis and impetus for successful utilization in drug delivery applications.

Direct and Reverse Pluronic Micelles: Design and Characterization of Promising Drug Delivery Nanosystems

Pluronics are a family of amphiphilic block copolymers broadly explored in the pharmaceutical field. Under certain conditions, Pluronics self-assemble in different structures including nanosized direct and reverse micelles. This review provides an overview about the main parameters affecting the micellization process of Pluronics, such as polymer length, fragments distribution within the chain, solvents, additives and loading of cargo. Furthermore, it offers a guide about the most common techniques used to characterize the structure and properties of the micelles. Finally, it presents up-to-date approaches to improve the stability and drug loading of Pluronic micelles. Special attention is paid to reverse Pluronics and reverse micelles, currently underexplored in the literature. Pluronic micelles present a bright future as drug delivery agents. A smart design and thorough characterization will improve the transfer to clinical applications.

Non-Ionic Surfactant Effects on Innate Pluronic 188 Behavior: Interactions, and Physicochemical and Biocompatibility Studies

The aim of this research was to prepare novel block copolymer-surfactant hybrid nanosystems using the triblock copolymer Pluronic 188, along with surfactants of different hydrophilic to lipophilic balance (HLB ratio-which indicates the degree to which a surfactant is hydrophilic or hydrophobic) and thermotropic behavior. The surfactants used were of non-ionic nature, of which Tween 80^® and Brij 58^® were more hydrophilic, while Span 40^® and Span 60^® were more hydrophobic. Each surfactant has unique innate thermal properties and an affinity towards Pluronic 188. The nanosystems were formulated through mixing the pluronic with the surfactants at three different ratios, namely 90:10, 80:20, and 50:50, using the thin-film hydration technique and keeping the pluronic concentration constant. The physicochemical characteristics of the prepared nanosystems were evaluated using various light scattering techniques, while their thermotropic behavior was characterized via microDSC and high-resolution ultrasound spectroscopy. Microenvironmental parameters were attained through the use of fluorescence spectroscopy, while the cytotoxicity of the nanocarriers was studied in vitro. The results indicate that the combination of Pluronic 188 with the above surfactants was able to produce hybrid homogeneous nanoparticle populations of adequately small diameters. The different surfactants had a clear effect on physicochemical parameters such as the size, hydrodynamic diameter, and polydispersity index of the final formulation. The mixing of surfactants with the pluronic clearly changed its thermotropic behavior and thermal transition temperature (Tm) and highlighted the specific interactions that occurred between the different materials, as well as the effect of increasing the surfactant concentration on inherent polymer characteristics and behavior. The formulated nanosystems were found to be mostly of minimal toxicity. The obtained results demonstrate that the thin-film hydration method can be used for the formulation of pluronic-surfactant hybrid nanoparticles, which in turn exhibit favorable characteristics in terms of their possible use in drug delivery applications. This investigation can be used as a road map for the selection of an appropriate nanosystem as a novel vehicle for drug delivery.

Different Agglomeration Processes Induced by the Varied Interaction of Fe-Fe Analogues with Differently Charged Surfactants

The catalytic activity of Prussian blue analogues (PBAs) is mainly tuned via the control of material sizes and morphologies. However, the shapes and sizes of many PBAs are difficult to control. In this work, a facile approach is demonstrated using differently charged surfactants to tune the catalytic activity of PBAs. Fe-Fe PBAs prepared with non-ionic P123, cationic cetyltrimethylammonium bromide, and anionic sodium dodecyl sulfate are chosen to study the effect of surfactant charges on the catalytic activity. The transesterification of propylene carbonate to dimethyl carbonate by methanol is selected as a model reaction. Owing to the different agglomeration processes of PB particles after modified with differently charged surfactants, significantly varied shapes and sizes were observed. Accordingly, the catalytic activity is greatly varied by adding surfactants. The different catalytic activities may arise from the different behaviors of agglomeration of PB particles after surfactant modification as well as the material size and shape changes. Besides, apparent activation energies for PBs adding different surfactants were derived. Finally, the agglomeration mechanism of PB particles in the presence of differently charged surfactants was proposed.

TiO2 Nanoparticles Dispersion in Block-Copolymer Aqueous Solutions: Nanoarchitectonics for Self-Assembly and Aggregation

Achieving homogenous dispersion of nanoparticles inside a polymeric matrix is a great challenge for numerous applications. In the present study, we aim at understanding the role of different factors on the dispersion properties of TiO₂ in pluronic F-127 mixtures. The mixtures were prepared with different pH and guest/host ratios and investigated by UV-Vis spectroscopy, dynamic light scattering, infrared spectroscopy and electrical conductivity. Depending on the preparation conditions, different amounts of TiO₂ were loaded within the copolymer as quantitatively determined by UV-Vis spectroscopy. The different content of nanoparticles has direct implications on the gelation and micellization of pluronic analyzed by dynamic light scattering. The information derived on the self-assembly behavior was interpreted in relation to the infrared and conductivity measurements results. Together, these results shed light on the most favorable conditions for improving the nanoparticle dispersion inside the copolymer matrix and suggest a possible strategy to design functional nanoparticle-polymer systems.

Aceclofenac-loaded pluronic F108/L81 mixed polymeric micelles: effect of HLB on solubilization

Pluronic block copolymers have phase behavioural characteristics which are extensively studied for drug delivery applications. In this study, we explored hydrophilic pluronic F108 (HLB = 27), hydrophobic pluronic L81 (HLB = 2) and their mixed micelles acting as solubilising mediums for model drug aceclofenac. The drug solubilisation and interactions have been analysed using UV-visible spectroscopy, Fluorescence spectroscopy, Rheology studies, Fourier-transform infrared spectroscopy, Scanning electron microscope, Dynamic light scattering, Cloud point and partition coefficient measurements. The investigation from UV-spectrophotometry demonstrated that mixed pluronic entrapped greater number of aceclofenac molecules than both the neat pluronics at same concentration. Excimer formation was evidenced from fluorescence spectra with pyrene as a probe. The rheological studies showed difference in viscosity over low shear range. Studies on FTIR demonstrated probable bonding between the aceclofenac and mixed pluronic molecules. The DLS studies on mixed pluronic showed swelling of micellar diameter from 317.6 nm to 413.5 nm. Thermodynamic parameters of the above system revealed higher partition coefficient value for mixed pluronic and spontaneity in drug solubilisation. This study can be exploited to use a hydrophobic copolymeric micelle in mixed pluronic formulation for better drug solubilisation.

Sodium dodecyl sulfate modulates the structure and rheological properties of Pluronic F108-poly(acrylic acid) coacervates)

Micelles formed within coacervate phases can impart functional properties, but it is unclear if this micellization provides mechanical reinforcement of the coacervate whereby the micelles act as high functionality crosslinkers. Here, we examine how sodium dodecyl sulfate (SDS) influences the structure and properties of Pluronic F108-polyacrylic acid (PAA) coacervates as SDS is known to decrease the aggregation number of Pluronic micelles. Increasing the SDS concentration leads to larger water content in the coacervate and an increase in the relative concentration of PAA to the other solids. Rheological characterization with small angle oscillatory shear (SAOS) demonstrates that these coacervates are viscoelastic liquids with the moduli decreasing with the addition of the SDS. The loss factor (tan δ) initially increases linearly with the addition of SDS, but a step function increase in the loss factor occurs near the reported CMC of SDS. However, this change in rheological properties does not appear to be correlated with any large scale structural differences in the coacervate as determined by small angle X-ray scattering (SAXS) with no signature of Pluronic micelles in the coacervate when SDS concentration is >4 mM during formation of the coacervate, which is less than that observed (6 mM SDS) in initial Pluronic F108 solution despite the higher polymer concentration in the coacervate. These results suggest that the mechanical properties of polyelectrolyte-non-ionic surfactant coacervates are driven by the efficicacy of binding between the complexing species driving the coacervate, which can be disrupted by competitive binding of the SDS to the Pluronic.

Interaction between sodium dodecylsulfate (SDS) and pluronic L61 in aqueous medium: assessment of the nature and morphology of the formed mixed aggregates by NMR, EPR, SANS and FF-TEM measurements

The interaction of copolymer L61 i.e., (EO)2(PO)32(EO)2 (where EO and PO are ethylene and propylene oxides, respectively) with surfactant SDS (sodium dodecylsulfate) in relation to their self-aggregation, dynamics and microstructures has been physicochemically studied in detail employing the Nuclear Magnetic Resonance (NMR), Electron Paramagnetic Resonance (EPR), Small-Angle Neutron Scattering (SANS), and Freeze-Fracture Transmission Electron Microscopy (FF-TEM) methods. The NMR self-diffusion study indicated a synergistic interaction between SDS and L61 forming L61-SDS mixed complex aggregates, and deuterium (2H) NMR pointed out the nonspherical nature of these aggregates with increasing [L61]. EPR spectral analysis of the motional parameters of 5-doxyl steraric acid (5-DSA) as a spin probe provided information on the microviscosity of the local environment of the L61-SDS complex aggregates. SANS probed the geometrical aspects of the SDS-L61 assemblies as a function of both [L61] and [SDS]. Progressive evolution of the mixed-aggregate geometries from globular to prolate ellipsoids with axial ratios ranging from 2 to 10 with increasing [L61] was found. Such morphological changes were further corroborated with the results of 2H NMR and FF-TEM measurements. The strategy of the measurements, and data analysis for a concerted conclusion have been presented.

Porous Graphitic Carbons Containing Nitrogen by Structuration of Chitosan with Pluronic P123

Using Pluronic P123 as a structure-directing agent and chitosan as a carbon precursor, different porous carbons with remarkable morphologies such as orthohedra or spheres with diametrically opposite holes are obtained. These particles of micrometric size are constituted by the stacking of thin sheets (60 nm) that become increasingly bent in the opposite sense, concave in the upper and convex in the bottom hemispheres, as the chitosan proportion increases. TEM images, after dispersion of the particles by sonication, show that besides micrometric graphene sheets, the material is constituted by nanometric onion-like carbons. The morphology and structure of these porous carbons can be explained based on the ability of Pluronic P123 to undergo self-assembly in aqueous solution due to its amphoteric nature and the filmogenic properties of chitosan to coat Pluronic P123 nanoobjects undergoing structuration and becoming transformed into nitrogen-doped graphitic carbons. XPS analysis reveals the presence of nitrogen in their composition. These porous carbons exhibit a significant CO2 adsorption capacity of above 3 mmol g-1 under 100 kPa at 273 K attributable to their large specific surface area, ultraporosity, and the presence of basic N sites. In addition, the presence of dopant elements in the graphitic carbons opening the gap is responsible for the photocatalytic activity for H2 generation in the presence of sacrificial electron donors, reaching a H2 production of 63 μmol g-1 in 24 h.

Several Shapes of Single Crystalline Gold Nanomaterials Prepared in the Surfactant Mixture of CTAB and Pluronics

Twin structures in gold nanomaterials are destined because they reduce the severe strains in the misfit region of nanostructures. Defect-free single crystalline plasmonic nanomaterials gain interests these days as the integration of plasmonic materials or plasmons into electronic devices and circuits becomes more common. In this study, without subtle experimental adjustments, such as pH or halide additives, several shapes of single crystalline gold nanoparticles (NPs) are prepared in the surfactant mixture of cetyltrimethylammonium bromide (CTAB) and Pluronic triblock copolymers. The synthesized NPs are primarily composed of {100} planes with small numbers of particles possessing a [110] zone axis. Pluronic copolymers with low number average molecular weights (M _n), such as L-31 (M _n ≈ 1100) and L-64 (M _n ≈ 2900), prefer anisotropic nanorods with the aspect ratios of 4.3 and 3.0, respectively, while Pluronics with high M _n values, such as F-68 (M _n ≈ 8400) and F-108 (M _n ≈ 14 600), favor more concentric and isotropic cube-like NPs. Extended micelles are believed to form in Pluronics with low M _n values in which hydrophobic cores are merged with the increase of temperature, while the corona regions that are composed of long tails of PEO prevent the merge of hydrophobic cores, and the growth of the micelles is limited in Pluronic copolymers with high M _n values. The catalytic degradation reactions of methyl orange are conducted, and rather than isotropic particles, gold nanorods exhibit better catalytic performances. More hydrophilic environment and the steric alignment of rigid aromatic structures of methyl orange along the nanorods are thought to contribute to the catalytic activities. Overall, highly confined geometries of the appropriately swollen micellar templates of Pluronics and CTAB, which is not so hydrophobic as for the formation of contracted deswollen templates and for the inhibition of the growth of NPs, and which is not so hydrophilic as for the formation of coarse templates and for the formation of isotropic spheres with varying sizes, are believed as the main factor for the formation of single crystalline gold NPs.

Thermosensitive hydrogels for vaginal delivery of secnidazole as an approach to overcome the systemic side-effects of oral preparations

Secnidazole (SEC) has been suggested as an alternative agent against Trichomonas vaginalis to overcome the adverse effects, antimicrobial resistance problems and poor adherence to the currently available therapy. Once no topical formulation may be found in the market until now, SEC was incorporated in thermosensitive bioadhesive systems to extend the contact time in the mucosa and to avoid a systemic drug disposition. Formulations containing 20% poloxamer 407, 1% poloxamer 188 and 1 or 2.5% chitosan showed suitable sol-gel transition temperature (> 30 °C), presenting a fast gelation time (100-115 s). Rheological, dynamic light scattering and infrared spectroscopy analysis suggested molecular interactions among polymers. Chitosan increased the mucoadhesion strength of the formulations. In addition, hydrogels showed a tendency to decrease the drug transport rate through mucosa when compared to the control. Mucin was also added onto mucosa for a more realistic simulation of permeability/retention. In the presence of this agent, hydrogels containing chitosan reduced the permeability/retention of the drug in approximately 2.0-fold when compared to the control. Therefore, the hydrogels presented suitable characteristics to remain in the vaginal environment, which would result in effective local treatment of trichomoniasis.

Adsorption of P103 Nanoaggregates on Graphene Oxide Nanosheets: Role of Electrostatic Forces in Improving Nanosheet Dispersion

Graphene oxide (GO) nanosheet suspension is not stable in physiological ionic fluids. To improve stability, surfactants such as Pluronic 103 (P103) have been tested. Going further, this work investigated whether conferring positive surface charge to the surfactant may improve the adsorption ability of P103 micelles on GO sheets. Positive charge on the surfactant was induced by adding dodecyltrimethylammonium bromide (DTAB, a cationic surfactant) in P103 micelles. Subsequent changes in aggregation parameters were investigated through dynamic light scattering and small-angle neutron scattering studies. DTAB incorporation was accompanied by a steady increase in the ζ potential and mixed micelle formation. At high surface charge density, the interaction between adjacent head groups was distorted, which led to dissociation of mixed micelles. Structural developments during the adsorption of mixed micelles on the sheet surface (mass fractal formation) were monitored in terms of changes in the scattering features of aggregates. These fractals emerged as a result of electrostatic interactions. Our observations point toward the existence of small-sized building blocks at low DTAB concentration (≤4 mM). With a superior adsorption, mixed micelles are expected to occupy the intersheet space and maintain a hydration layer. However, at a higher DTAB concentration (≥10 mM), micelles dissociate to produce DTAB-rich unimers and P103-rich loose aggregates. At this point, sheets tend to aggregate in the solvent, regardless of fractal formation.

Depletion Forces Induced by Mixed Micelles of Nonionic Block Copolymers and Anionic Surfactants

Depletion forces were measured between a silica sphere and a silica plate in solutions containing nonionic Pluronic P123 poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) triblock copolymers and anionic sodium dodecyl sulfate (SDS) surfactants using colloidal probe atomic force microscopy. Prior research established synergistic depletion force enhancement in solutions containing SDS and unimeric Pluronic F108 block copolymers via formation of large pseudo-polyelectrolyte complexes. The current work addresses a more complex system where the polymer is above its critical micelle concentration, and surfactant binding alters not only the size and charge of the micelles but also the number of polymers per micelle. Force profiles were measured in 10 000 ppm P123 (1 wt %, corresponding to 1.72 mM based on average molar mass) solutions containing SDS at concentrations up to 64 mM and compared to micellar P123 solutions and to P123-free SDS solutions. Whereas force profiles in the SDS-free micellar P123 solutions were purely repulsive, P123/SDS complexation produced synergistic depletion force enhancement for SDS concentrations between 2 and 32 mM. The synergism that occurred within a finite SDS concentration range was explained by comparing the hydrodynamic size, molar mass, charge, and concentration of depletants in P123/SDS mixtures and their respective single-component solutions obtained with the aid of dynamic light scattering, static light scattering, and dodecyl sulfate ion-selective electrode measurements. These measurements showed that complexation produced effects that would be mutually counteracting with respect to depletion forces: decreasing the mixed micelle hydrodynamic diameter relative to SDS-free P123 micelles would tend to weaken depletion forces, while adding charge and decreasing the aggregation number of polymers per micelle (thereby increasing the number concentration of micellar depletants) would tend to strengthen depletion forces.

Effect of Pyrrolidinium Formate Ionic Liquid on Micellization of Direct and Reverse Pluronics in Aqueous Solutions

The behavior of direct and reverse Pluronic, copolymer nonionic surfactants, poly(ethylene oxide) PEO, and poly(propylene oxide) PPO copolymers, in aqueous solution and in the pyrrolidinium formate ([pyrr][F]) ionic liquid, was investigated using Fourier transform infrared spectroscopy (FTIR spectroscopy). The study was performed for a fixed Pluronic concentration at room temperature. We showed that in aqueous solution, the spectra associated with the direct and reverse Pluronics are similar irrespective of the difference in length of the various PPO and PEO blocks, their positions and the PPO:PEO ratio. The study of those same Pluronics dissolved in a pure pyrrolidinium formate solution showed that the Pluronic types were soluble and that the micellization process can take place at room temperature. The interaction between the Pluronic 10R5 aqueous solutions and the [pyrr][F] for various ionic liquid volumes is reported.

Coarse-Grained Molecular Dynamic and Experimental Studies on Self-Assembly Behavior of Nonionic F127/HS15 Mixed Micellar Systems

The self-assembly of a nonionic triblock copolymer (F127) and a nonionic surfactant (HS15) has been investigated due to favorable changes in properties in their mixtures. The effect of the mixing ratio on the self-assembly process and on the structural stability of the mixtures was studied by coarse-grained molecular dynamic simulation (CGMD) and experimental measurements (transmission electron microscopy, dynamic light scattering measurement, drug loading stability analysis, and fluorescence spectroscopy measurement). The CGMD provided the information on self-assembly behavior. The microstructure and micellar stability are affected by different proportions of F127/HS15. Pure HS15 molecules (system I) can rapidly form stable aggregates driven by strong hydrophobic force, including two steps: the formation of seed clusters and the fusion of them. At low F127 ratio (system II), the self-assembly process is dynamic unstable, and a volatile "coil/cluster-like" aggregate is formed under the single "binding" effect. As the ratio of added F127 increase, such as system III, stable "lotus-seedpod-like" aggregates form under the double effects of "binding plus wrapping". Its dynamic equilibrium can be achieved rapidly. The experimental results approved the assumption of "different mixing ratio with different structural stability" and even different loading stability of F127/HS15 systems for drugs with different log P, such as PUE and DTX, which means different loading area for them in the micellar systems at different mixing ratios because of less hydrophobic microdomains with the increase of F127 molecules.

Efficacy of several additives to modulate the phase behavior of biomedical polymers: A comprehensive and comparative outlook

Several new classes of polymeric materials are being introduced with unique properties. Thermoresponsive polymers (TRPs) are one of the most fascinating and emerging class of biomaterials in biomedical research. The design of TRPs with good response to temperature and its ability to exhibit coil to globular transition behavior near to physiological temperature made them more promising materials in the field of biomaterials and biomedicines. Instead of numerous studies on TRPs, the mechanistic interplay among several additives and TRPs is still not understood clearly and completely. The lack of complete understanding of biomolecular interactions of various additives with TRPs is limiting their applications in interdisciplinary science as well as pharmaceutical industry. There is a great need to provide a collective and comprehensive information of various additives and their behavior on widely accepted biopolymers, TRPs such as poly(N-isopropylacrylamide) (PNIPAM), poly(vinyl methyl ether) (PVME), poly(N-vinylcaprolactum) (PVCL) and poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) in aqueous solution. Obviously, as the literature on the influence of various additives on TRPs is very vast, therefore we focus our review only on these four selected TRPs. Additives such as polyols, methylamines, surfactants and denaturants basically made the significant changes in water structure associated to polymer via their entropy variation which is the direct influence of their directly or indirectly binding abilities. Eventually, this review addresses a brief overview of the most recent literature of applications based phase behavior of four selected TRPs in response to external stimuli. The work enhances the knowledge for use of TRPs in the advanced development of drug delivery system and in many more pharmaceutical applications. These kinds of studies provide powerful impact in exploring the utility range of polymeric materials in various field of science.

Printing Life-Inspired Subcellular Scale Compartments with Autonomous Molecularly Crowded Confinement

A simple, rapid, and highly controlled platform to prepare life-inspired subcellular scale compartments by inkjet printing has been developed. These compartments consist of fL-scale aqueous droplets (few µm in diameter) incorporating biologically relevant molecular entities with programmed composition and concentration. These droplets are ink-jetted in nL mineral oil drop arrays allowing for lab-on-chip studies by fluorescence microscopy and fluorescence life time imaging. Once formed, fL-droplets are stable for several hours, thus giving the possibility of readily analyze molecular reactions and their kinetics and to verify molecular behavior and intermolecular interactions. Here, this platform is exploited to unravel the behavior of different molecular probes and biomolecular systems (DNA hairpins, enzymatic cascades, protein-ligand couples) within the compartments. The fL-scale size induces the formation of molecularly crowded confined shell structures (hundreds of nanometers in thickness) at the droplet surface, allowing discovery of specific features (e.g., heterogeneity, responsivity to molecular triggers) that are mediated by the intermolecular interactions in these peculiar environments. The presented results indicate the possibility of using this platform for designing nature-inspired confined reactors allowing for a deepened understanding of molecular confinement effects in living subcellular compartments.

Synthesis of Prolate-Shaped Au Nanoparticles and Au Nanoprisms and Study of Catalytic Reduction Reactions of 4-Nitrophenol

The growth into anisotropic one or two dimensions is important in plasmonic gold nanomaterials because extinction occurs along multiple axes and sometimes the resonance extends to the near-infrared region. The surfactant mixture of cetyltrimethylammonium bromide (CTAB) and Pluronic triblock copolymers has been recently demonstrated to be efficient anisotropic soft templates for the growth of noble metal nanomaterials. Seed-mediated growth of two types of anisotropic Au nanoparticles is achieved in this study. One is one-dimensional prolate-shaped Au nanoparticles with the average aspect ratios of 2.29 and 2.59, and the other is two-dimensional gold nanoprisms with the average edge length of 50.4 nm. These anisotropic structures are believed to be produced by the tendency of Pluronic copolymers to be micellized anisotropically at the elevated temperatures and by the preference for being lamellar mesophases in the phase diagrams when the concentration is highest. When prepared in the surfactant mixture of CTAB and L-64 (17.9%), Au nanoparticles containing spherical particles (27.9 nm) as the major products show the best catalytic performances in the reduction reactions of 4-nitrophenol.

Polymer-assisted drug sequestration from plasma protein by a surfactant with curtailed denaturing capacity

The capability of a surfactant to sequester a drug bound to plasma protein was investigated using steady-state and time-resolved spectroscopic techniques. Surfactants are known to denature protein, and hence are not suitable for the sequestration of a drug from protein. Herein, we show that the denaturing capacity of a surfactant is curtailed completely and its drug sequestration power is enhanced in the presence of biocompatible Pluronic micelles due to the formation of unique supramolecular assemblies. Further, our detailed studies indicate that the concentration of surfactant required for the sequestration of a drug is less than its critical micellar concentration (CMC). The extent of sequestration of drug by polymer-surfactant supramolecular assemblies can be tuned finely by controlling the concentration of surfactant. Detailed analysis showed that up to ∼85% sequestration of a drug from plasma protein could be achieved using a sub-CMC concentration of surfactant. Our results clearly show that controlled sequestration of a drug from plasma protein can be achieved with a reduction in the protein denaturing properties of surfactants.

A, Paul A. Tuning water oxidation reactivity by employing surfactant directed synthesis of porous Co3O4 nanomaterials

We have explored Co₃O₄ based nanomaterials for the oxygen evolution reaction prepared via a surfactant directed soft-templating strategy.

Solubilization and interaction of ciprofloxacin with pluronics and their mixed micelles

The hydrophobic drug ciprofloxacin in the core of mixed micelles of Pluronic F108 and Pluronic L81.

Ag(i)-mediated self-assembly of anisotropic rods and plates in the surfactant mixture of CTAB and Pluronics

One-dimensional (1D) metallogels are commonly observed in metal-coordinated complexes, but there are not many examples of soft crystalline solids which are generated by the self-assembly of metal–polymer complexation in a non-gel state. In a continued effort to obtain 1D materials by utilizing the tendency of Pluronic triblock copolymers to be micellized anisotropically at an elevated temperature, we investigate Ag(i)-mediated self-assembly of the surfactant mixture of Pluronic copolymers and cetyltrimethylammonium bromide (CTAB). At sufficiently high temperature, Pluronic copolymers are known to organize into many crystalline mesophases, such as body-centered-cubic, hexagonal, and lamellar phases. Four Pluronics of L-31, L-64, P-123, and F-108 were studied, and at the concentration of 17.9%, macroscale 1D rods with the aspect ratios ranging from 3.07 to 12.8 are obtained. At the concentration of 35.7%, anisotropic two dimensional (2D) planar plates are observed. These planar structures were believed to be generated from 2D lamellar mesophases, which is consistent with the general phase diagram of Pluronic copolymers that shows lamellar phase with the highest concentration. In the absence of ascorbic acid, rods and plates of larger size are produced. Rather than as a reductant, ascorbic acid is thought to play the roles of an agent to increase the hydrophilicity, and as a mediator to determine the dimension of rods and plates by hindering the long range self-assembly of alkyl chains. Dehydration by the addition of AgNO₃, and the increase of hydrophobicity enable self-assembly of alkyl groups of CTAB and Pluronics and promote the formation of crystalline soft solids.

Macroscale anisotropic rods and plates were generated by the self-assembly of CTAB and Pluronics in the presence of AgNO₃.

Hard Pd Nanorods in the Soft Surfactant Mixture of CTAB and Pluronics: Seedless Synthesis and Their Self-Assembly

Seedless synthesis of Pd nanorods and their self-assembly into the layered smectic ordering are described. Aqueous Pluronic triblock copolymers (14.3-35.7%) are used as a soft template along with cetyltrimethylammonium bromide for inducing one-dimensional growth of Pd nanorods. Pluronic triblock copolymers are probably the most used polymer surfactants, and they are composed of poly(ethylene oxide) (PEO)-poly(propylene oxide) (PPO)-PEO triblocks. Neither pH adjustment nor AgNO₃ and other additives, such as poly(vinyl pyrrolidone) and ethylene glycol, are required to obtain Pd nanorods. Sonochemical synthesis at 43 °C, followed by thermal annealing for 1 h at 65 °C produces Pd nanorods with the aspect ratio from 3.1 (17.9%, Pluronic L-64) to 6.7 (35.7%, Pluronic P-123). Two-dimensional self-assembly of the nanorods is observed, and both nematic ordering between the mesogens and smectic ordering between the layers is identified. Micellar hydrophobic PPO with hydrated PEO coronas are known to self-assemble into many crystalline orders, including cubic, hexagonal, lamellar, and inverse hexagonal mesophases, which extend into cylindrical micelles with increasing temperature. Relatively small size of Pluronic copolymers with regard to general polymers, but rather large size of their micelles and their tendency to organize into crystalline mesophases are thought to contribute to the anisotropic growth of Pd nanorods.

Ionic Liquid-Assisted Synthesis of Mesoporous Carbons with Surface-Enriched Nitrogen for the Hydrogen Evolution Reaction

Heteroatom-doped carbon materials are promising metal-free catalysts for the hydrogen evolution reaction (HER) at low voltage with high durability. However, many of the active sites introduced by heteroatom doping are hardly accessible within the bulk carbon structure and consequently contribute little to the catalytic activity. Here we report a facile ionic liquid-assisted method for synthesizing mesoporous nitrogen-doped carbons, enabling enrichment of nitrogen atoms at the pore surface, demonstrated by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of carbon dioxide (CO₂-TPD). The resulting metal-free nitrogen-doped mesoporous carbons exhibit a remarkable electrocatalytic activity in HER. The accessible and efficient utilization of nitrogen atoms is responsible for the superior HER catalytic activity.

Formulation of Poloxamers for Drug Delivery

Poloxamers, also known as Pluronics®, are block copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), which have an amphiphilic character and useful association and adsorption properties emanating from this. Poloxamers find use in many applications that require solubilization or stabilization of compounds and also have notable physiological properties, including low toxicity. Accordingly, poloxamers serve well as excipients for pharmaceuticals. Current challenges facing nanomedicine revolve around the transport of typically water-insoluble drugs throughout the body, followed by targeted delivery. Judicious design of drug delivery systems leads to improved bioavailability, patient compliance and therapeutic outcomes. The rich phase behavior (micelles, hydrogels, lyotropic liquid crystals, etc.) of poloxamers makes them amenable to multiple types of processing and various product forms. In this review, we first present the general solution behavior of poloxamers, focusing on their self-assembly properties. This is followed by a discussion of how the self-assembly properties of poloxamers can be leveraged to encapsulate drugs using an array of processing techniques including direct solubilization, solvent displacement methods, emulsification and preparation of kinetically-frozen nanoparticles. Finally, we conclude with a summary and perspective.

Agarose hydrogel containing immobilized pH buffer microemulsion without increasing permselectivity

A heterogeneous pH buffer based on a colloidal emulsion containing ion-exchanger and lipophilic base is described that can be integrated into hydrogels without affecting their ion-exchange properties. Each sphere works on the basis of reversible ion-exchange of hydrogen ions with solution cations, acting as a pH buffer while staying removed from solution in the nonpolar core of the spheres. The ion-exchange mechanism is supported by titration experiments in aqueous emulsion, showing that the nature and concentration of the exchanging solution cations influences the buffer action, with increasing lipophilicity moving the equilibrium to lower pH values. Agarose gels with entrapped pH buffer emulsions and mounted in a transport cell are shown by zero current potentiometry to exhibit negligible permselective properties above an ionic strength of 1mM, a behavior no different from unmodified agarose, with an observed ion-exchanger concentration of 7mM in dry agarose. This suggests that such pH buffers do not give rise to substantial ion-exchange properties of the gel material. In a first attempt to control the pH in the vicinity of an electrode surface by this approach, the emulsion was entrapped in an agarose gel in direct contact with a pH electrode, demonstrating the ability to buffer such gel films.

Influence of additives on thermoresponsive polymers in aqueous media: a case study of poly(N-isopropylacrylamide)

Thermoresponsive polymers (TRPs) in different solvent media have been studied over a long period and are important from both scientific and technical points of view.

Effects of Salt-Controlled Self-Assembly of Triblock Copolymers F68 on Interaction Forces between Oil Drops in Aqueous Solution

Nonionic triblock copolymers, surfactant Pluronic F68 (PEO76-PPO29-PEO76), are widely used in industrial processes, such as foaming, emulsification, and stabilization. The behaviors of triblock copolymers such as the salt-dependent self-assembly in bulk solution and the irreversible adsorption at the oil/water interface are mainly focused to explore their effects on the interaction forces between nano-spacing interfaces of oil droplets. In this study, the atomic force microscopy (AFM) technique was employed to measure the drop interaction forces with different F68 bulk concentrations. All selected bulk concentrations (≥100 μM) of copolymers can ensure the formation of a stable layer structure of stretched polymer chains ("brush") at the oil/water interface, which behaved as a mechanical barrier at the interface. This study quantified the forces caused by the space hindrance of F68 copolymers both in the bulk phase and at the interface of oil/F68 aqueous solution during drop interaction. The effects of monovalent electrolyte (NaCl)-induced self-assembly behavior of triblock copolymers F68 in bulk solution on drop interaction forces were measured through the AFM technique.

Anticancer Activities of Surfactin and Potential Application of Nanotechnology Assisted Surfactin Delivery

Surfactin, a cyclic lipopeptide biosurfactant produced by various strains of Bacillus genus, has been shown to induce cytotoxicity against many cancer types, such as Ehrlich ascites, breast and colon cancers, leukemia and hepatoma. Surfactin treatment can inhibit cancer progression by growth inhibition, cell cycle arrest, apoptosis, and metastasis arrest. Owing to the potent effect of surfactin on cancer cells, numerous studies have recently investigated the mechanisms that underlie its anticancer activity. The amphiphilic nature of surfactin allows its easy incorporation nano-formulations, such as polymeric nanoparticles, micelles, microemulsions, liposomes, to name a few. The use of nano-formulations offers the advantage of optimizing surfactin delivery for an improved anticancer therapy. This review focuses on the current knowledge of surfactin properties and biosynthesis; anticancer activity against different cancer models and the underlying mechanisms involved; as well as the potential application of nano-formulations for optimal surfactin delivery.

Polymer-Amphiphile Interactions: An Overview

Interactions between the polymers and amphiphiles in aqueous solutions have generated considerable interest among researchers because of the widespread applications, relatively complex behavior and improved physicochemical properties of the mixtures. Numerous studies on the surfactant-polymer systems have been carried out in recent years and the number of scientific reports has considerably increased. Various applications of polymers in different areas and many works concerning the amphiphiles are being published every year. Usually, the mixed systems containing polymers and amphiphiles show solution properties different from those of individual solutions due to interaction between the components. The present review article mainly focuses on the behaviour of polymers in aqueous solutions, in the absence or presence of amphiphiles, such as surfactants, drugs, etc. It also summarizes effect of the nature of amphiphiles on aggregation properties of polymers in aqueous solution, and interaction of conventional as well as gemini surfactants with polymers.