pH- and voltage-responsive chitosan hydrogel through covalent cross-linking with catechol

Advances in Stimuli-Responsive Chitosan Hydrogels for Drug Delivery Systems

Sustainable and controllable drug transport is one of the most efficient ways of disease treatment. Due to high biocompatibility, good biodegradability, and low costs, chitosan and its derivatives are widely used in biomedical fields. Specifically, chitosan hydrogel enables drugs to pass through biological barriers because of their abundant amino and hydroxyl groups that can interact with human tissues. Moreover, the multi-responsive nature (pH, temperature, ions strength, and magnetic field, etc.) of chitosan hydrogels makes precise drug release a possibility. Here, the synthesis methods, modification strategies, stimuli-responsive mechanisms of chitosan-based hydrogels, and their recent progress in drug delivery are summarized. Chitosan hydrogels that carry and release drugs through subcutaneous (dealing with wound dressing), oral (dealing with gastrointestinal tract), and facial (dealing with ophthalmic, ear, and brain) are reviewed. Finally, challenges toward clinic application and the future prospects of stimuli-responsive chitosan-based hydrogels are indicated.

Research progress on chitin/chitosan-based emulsion delivery systems and their application in lipid digestion regulation

Excessive lipid intake is linked to an elevated risk of health problems. However, reducing lipid contents may influence food structure and flavor. Some alternatives are needed to control the lipid absorption. Emulsions are common carriers for lipids, which can control the hydrolysis and absorption of lipids. Chitin (Ch) and chitosan (CS) are natural polysaccharides with good biodegradability, biocompatibility, and unique cationic properties. They have been reported to be able to delay lipolysis, which can be regarded as one of the most promising agents that regulates lipid digestion (LiD). The application of Ch/CS and their derivatives in emulsions are summarized in this review with a focus on their performances and mechanisms for LiD regulation, aiming to provide theoretical guidance for the development of novel Ch/CS emulsions, and the regulation of LiD. A reasonable design of emulsion interface can provide its resistance to the external environment and then control LiD. The properties of emulsion interface are the key factors affecting LiD. Therefore, systematic study on the relationship between Ch/CS-based emulsion structure and LiD can not only instruct the reasonable design of emulsion interface to accurately regulate LiD, but also provide scientific guidelines for applying Ch/CS in functional food, medicine and other fields.

Mussel-Based Biomimetic Strategies in Musculoskeletal Disorder Treatment: From Synthesis Principles to Diverse Applications

Musculoskeletal disorders are the second leading cause of disability worldwide, posing a huge global burden to the public sanitation system. Currently, tissue engineering-based approaches act as effective strategies, which are, however, challenging in limited application scenarios. Mussel-based biomimetic materials, exhibit numerous unique properties such as intense adhesion, biocompatibility, moisture resistance, and injectability, to name only a few, and have attracted extensive research interest. In particular, featuring state-of-the-art properties, mussel-inspired biomaterials have been widely explored in innumerable musculoskeletal disorder treatments including osteochondral defects, osteosarcoma, osteoarthritis, ligament rupture, and osteoporosis. Nevertheless, a comprehensive and timely discussion of their applications in musculoskeletal disorders is insufficient. In this review, we emphasize on (1) the main categories and characteristics of mussel foot proteins and their fundamental mechanisms for the spectacular adhesion in mussels; (2) the diverse synthetic methods and modification of various polymers; and (3) the emerging applications of mussel-biomimetic materials, the future perspectives, and challenges, especially in the area of musculoskeletal disorder. We envision that this review will provide a unique and insightful perspective to improve the development of a new generation of mussel biomimetic strategies.

Amphiphilic sodium alginate-polylysine hydrogel with high antibacterial efficiency in a wide pH range

Bacterial infection is a major pathological factor leading to persistent wounds. With the aging of population, wound infection has gradually become a global health-issue. The wound site environment is complicated, and the pH changes dynamically during healing. Therefore, there is an urgent need for new antibacterial materials that can adapt to a wide pH range. To achieve this goal, we developed a thymol-oligomeric tannic acid/amphiphilic sodium alginate-polylysine hydrogel film, which exhibited excellent antibacterial efficacy in the pH range from 4 to 9, achieving the highest achievable 99.993 % (4.2 log units) and 99.62 % (2.4 log units) against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, respectively. The hydrogel films exhibited excellent cytocompatibility, suggesting that the materials are promising as a novel wound healing material without the concern of biosafety.

Polysaccharide-based nanocomposites for biomedical applications: a critical review

Polysaccharides (PSA) have taken specific position among biomaterials for advanced applications in medicine. Nevertheless, poor mechanical properties are known as the main drawback of PSA, which highlights the need for PSA modification. Nanocomposites PSA (NPSA) are a class of biomaterials widely used as biomedical platforms, but despite their importance and worldwide use, they have not been reviewed. Herein, we critically reviewed the application of NPSA by categorizing them into generic and advanced application realms. First, the application of NPSA as drug and gene delivery systems, along with their role in the field as an antibacterial platform and hemostasis agent is discussed. Then, applications of NPSA for skin, bone, nerve, and cartilage tissue engineering are highlighted, followed by cell encapsulation and more critically cancer diagnosis and treatment potentials. In particular, three features of investigations are devoted to cancer therapy, i.e., radiotherapy, immunotherapy, and photothermal therapy, are comprehensively reviewed and discussed. Since this field is at an early stage of maturity, some other aspects such as bioimaging and biosensing are reviewed in order to give an idea of potential applications of NPSA for future developments, providing support for clinical applications. It is well-documented that using nanoparticles/nanomaterials above a critical concentration brings about concerns of toxicity; thus, their effect on cellular interactions would become critical. We compared nanoparticles used in the fabrication of NPSA in terms of toxicity mechanism to shed more light on future challenging aspects of NPSA development. Indeed, the neutralization mechanisms underlying the cytotoxicity of nanomaterials, which are expected to be induced by PSA introduction, should be taken into account for future investigations.

Recent Applications of Dual-Stimuli Responsive Chitosan Hydrogel Nanocomposites as Drug Delivery Tools

Polysaccharides are a versatile class of macromolecules that are involved in many biological interactions critical to life. They can be further modified for added functionality. Once derivatized, these polymers can exhibit new chemical properties that can be further optimized for applications in drug delivery, wound healing, sensor development and others. Chitosan, derived from the N-deacetylation of chitin, is one example of a polysaccharide that has been functionalized and used as a major component of polysaccharide biomaterials. In this brief review, we focus on one aspect of chitosan's utility, namely we discuss recent advances in dual-responsive chitosan hydrogel nanomaterials.

Nanocapsules modify membrane interaction of polymyxin B to enable safe systemic therapy of Gram-negative sepsis

Systemic therapy of Gram-negative sepsis remains challenging. Polymyxin B (PMB) is well suited for sepsis therapy due to the endotoxin affinity and antibacterial activity. However, the dose-limiting toxicity has limited its systemic use in sepsis patients. For safe systemic use of PMB, we have developed a nanoparticulate system, called D-TZP, which selectively reduces the toxicity to mammalian cells but retains the therapeutic activities of PMB. D-TZP consists of an iron-complexed tannic acid nanocapsule containing a vitamin D core, coated with PMB and a chitosan derivative that controls the interaction of PMB with endotoxin, bacteria, and host cells. D-TZP attenuated the membrane toxicity associated with PMB but retained the ability of PMB to inactivate endotoxin and kill Gram-negative bacteria. Upon intravenous injection, D-TZP protected animals from pre-established endotoxemia and polymicrobial sepsis, showing no systemic toxicities inherent to PMB. These results support D-TZP as a safe and effective systemic intervention of sepsis.

Simple, rapidly electroassembled thiolated PEG-based sensor interfaces enable rapid interrogation of antibody titer and glycosylation

Process conditions established during the development and manufacture of recombinant protein therapeutics dramatically impacts their quality and clinical efficacy. Technologies that enable rapid assessment of product quality are critically important. Here, we describe the development of sensor interfaces that directly connect to electronics and enable near real-time assessment of antibody titer and N-linked galactosylation. We make use of a spatially resolved electroassembled thiolated polyethylene glycol hydrogel that enables electroactivated disulfide linkages. For titer assessment, we constructed a cysteinylated protein G that can be linked to the thiolated hydrogel allowing for robust capture and assessment of antibody concentration. For detecting galactosylation, the hydrogel is linked with thiolated sugars and their corresponding lectins, which enables antibody capture based on glycan pattern. Importantly, we demonstrate linear assessment of total antibody concentration over an industrially relevant range and the selective capture and quantification of antibodies with terminal β-galactose glycans. We also show that the interfaces can be reused after surface regeneration using a low pH buffer. Our functionalized interfaces offer advantages in their simplicity, rapid assembly, connectivity to electronics, and reusability. As they assemble directly onto electrodes that also serve as I/O registers, we envision incorporation into diagnostic platforms including those in manufacturing settings.

Polymeric Hydrogel Systems as Emerging Biomaterial Platforms to Enable Hemostasis and Wound Healing

Broad interest in developing new hemostatic technologies arises from unmet needs in mitigating uncontrolled hemorrhage in emergency, surgical, and battlefield settings. Although a variety of hemostats, sealants, and adhesives are available, development of ideal hemostatic compositions that offer a range of remarkable properties including capability to effectively and immediately manage bleeding, excellent mechanical properties, biocompatibility, biodegradability, antibacterial effect, and strong tissue adhesion properties, under wet and dynamic conditions, still remains a challenge. Benefiting from tunable mechanical properties, high porosity, biocompatibility, injectability and ease of handling, polymeric hydrogels with outstanding hemostatic properties have been receiving increasing attention over the past several years. In this review, after shedding light on hemostasis and wound healing processes, the most recent progresses in hydrogel systems engineered from natural and synthetic polymers for hemostatic applications are discussed based on a comprehensive literature review. Most studies described used in vivo models with accessible and compressible wounds to assess the hemostatic performance of hydrogels. The challenges that need to be tackled to accelerate the translation of these novel hemostatic hydrogel systems to clinical practice are emphasized and future directions for research in the field are presented.

Facile Electrochemical Demethylation of 2-Methoxyphenol to Surface-Confined Catechol on the MWCNT and Its Efficient Electrocatalytic Hydrazine Oxidation and Sensing Applications

Owing to its biological significance, preparation of stable surface-confined catechol (CA) is a long-standing interest in electrochemistry and surface chemistry. In this connection, various chemical approaches such as covalent immobilization (using amine- and carboxylate-functionalized CA, diazotization-based coupling, and Michael addition reaction), self-assembled monolayer on gold (thiol-functionalized CA is assembled on the gold surface), CA adsorption on the ad-layer of a defect-free single-crystal Pt surface, π-π bonding, CA pendant metal complexes, and CA-functionalized polymer-modified electrodes have been reported in the literature. In general, these conventional methods are involved with a series of time-consuming synthetic procedures. Indeed, the preparation of a surface-fouling-free surface-confined system is a challenging task. Herein, we introduce a new and facile approach based on electrochemical demethylation of 2-methoxyphenol as a precursor on the graphitic surface (MWCNT) at a bias potential, 0.5 V vs Ag/AgCl in neutral pH solution. Such an electrochemical performance resulted in the development of a stable and well-defined redox peak at E ^o' = 0.15 (A2/C2) V vs Ag/AgCl within 10 min of preparation time in pH 7 phosphate buffer solution. Calculated surface excess (16.65 × 10^-9 mol cm^-2) is about 10-1000 times higher than the values reported with other preparation methods. The product (catechol) formed on the modified electrode was confirmed by collective electrochemical and physicochemical characterizations such as potential segment analysis, TEM, Raman, IR, UV-vis, GC-MS, and NMR spectroscopic techniques, and thin-layer chromatographic studies. The electrocatalytic efficiency of the surface-confined CA system was demonstrated by studying hydrazine oxidation and sensing reactions in a neutral pH solution. This new system is found to be tolerant to various interfering biochemicals such as uric acid, xanthine, hypoxanthine, glucose, nitrate, hydrogen peroxide, ascorbic acid, Cu²⁺, and Fe²⁺. Since the approach is simple, rapid, and reproducible, a variety of surface-confined CA systems can be prepared.

Covalently and ionically, dually crosslinked chitosan nanoparticles block quorum sensing and affect bacterial cell growth on a cell-density dependent manner

In our efforts to improve the quality and stability of chitosan nanoparticles (NPs), we describe here a new type of chitosan NPs dually crosslinked with genipin and sodium tripolyphosphate (TPP) that display quorum quenching activity. These NPs were created using a simplified and robust procedure that resulted in improved physicochemical properties and enhanced stability. This procedure involves the covalent crosslinking of chitosan with genipin, followed by the formation of chitosan NPs by ionic gelation with TPP. We have optimized the conditions to obtain genipin pre-crosslinked nanoparticles (PC-NPs) with positive ς-potential (~ +30 mV), small diameter (~130 nm), and low size distributions (PdI = 0.1-0.2). PC-NPs present physicochemical properties that are comparable to those of other dually crosslinked chitosan NPs fabricated with different protocols. In contrast to previously characterized NPs, however, we found that PC-NPs strongly reduce the acyl homoserine lactone (AHL)-mediated quorum sensing response of an Escherichia coli fluorescent biosensor. Thus, PC-NPs combine, in a single design, the stability of dually crosslinked chitosan NPs and the quorum quenching activity of ionically crosslinked NPs. Similar to other chitosan NPs, the mode of action of PC-NPs is consistent with the existence of a "stoichiometric ratio" of NP/bacterium, at which the positive charge of the NPs counteracts the negative ς-potential of the bacterial envelope. Notably, we found that the time of the establishment of the "stoichiometric ratio" is a function of the NP concentration, implying that these NPs could be ideal for applications aiming to target of bacterial populations at specific cell densities. We are confident that our PC-NPs are up-and-coming candidates for the design of efficient anti-quorum sensing and a new generation antimicrobial strategies.

Characterization of ginsenoside compound K loaded ionically cross-linked carboxymethyl chitosan-calcium nanoparticles and its cytotoxic potential against prostate cancer cells

Backgroud

Ginsenoside compound K (GK) is a major metabolite of protopanaxadiol-type ginsenosides and has remarkable anticancer activities in vitro and in vivo. This work used an ionic cross-linking method to entrap GK within O-carboxymethyl chitosan (OCMC) nanoparticles (Nps) to form GK-loaded OCMC Nps (GK–OCMC Nps), which enhance the aqueous solubility and stability of GK.

Methods

The GK–OCMC Nps were characterized using several physicochemical techniques, including x-ray diffraction, transmission electron microscopy, zeta potential analysis, and particle size analysis via dynamic light scattering. GK was released from GK–OCMC Nps and was conducted using the dialysis bag diffusion method. The effects of GK and GK–OCMC Nps on PC3 cell viability were measured by using the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide assay. Fluorescent technology based on Cy5.5-labeled probes was used to explore the cellular uptake of GK–OCMC Nps.

Results

The GK–OCMC NPs had a suitable particle size and zeta potential; they were spherical with good dispersion. In vitro drug release from GK–OCMC NPs was pH dependent. Moreover, the in vitro cytotoxicity study and cellular uptake assays indicated that the GK–OCMC Nps significantly enhanced the cytotoxicity and cellular uptake of GK toward the PC3 cells. GK–OCMC Nps also significantly promoted the activities of both caspase-3 and caspase-9.

Conclusion

GK–OCMC Nps are potential nanocarriers for delivering hydrophobic drugs, thereby enhancing water solubility and permeability and improving the antiproliferative effects of GK.

Melanin deposition in two Cryptococcus species depends on cell-wall composition and flexibility

Cryptococcus neoformans and Cryptococcus gattii are two species complexes in the large fungal genus Cryptococcus and are responsible for potentially lethal disseminated infections. These two complexes share several phenotypic traits, such as production of the protective compound melanin. In C. neoformans, the pigment associates with key cellular constituents that are essential for melanin deposition within the cell wall. Consequently, melanization is modulated by changes in cell-wall composition or ultrastructure. However, whether similar factors influence melanization in C. gattii is unknown. Herein, we used transmission EM, biochemical assays, and solid-state NMR spectroscopy of representative isolates and "leaky melanin" mutant strains from each species complex to examine the compositional and structural factors governing cell-wall pigment deposition in C. neoformans and C. gattii. The principal findings were the following. 1) C. gattii R265 had an exceptionally high chitosan content compared with C. neoformans H99; a rich chitosan composition promoted homogeneous melanin distribution throughout the cell wall but did not increase the propensity of pigment deposition. 2) Strains from both species manifesting the leaky melanin phenotype had reduced chitosan content, which was compensated for by the production of lipids and other nonpolysaccharide constituents that depended on the species or mutation. 3) Changes in the relative rigidity of cell-wall chitin were associated with aberrant pigment retention, implicating cell-wall flexibility as an independent variable in cryptococcal melanin assembly. Overall, our results indicate that cell-wall composition and molecular architecture are critical factors for the anchoring and arrangement of melanin pigments in both C. neoformans and C. gattii species complexes.

A review on applications of chitosan-based Schiff bases

Biopolymers have become very attractive as they are degradable, biocompatible, non-toxic and renewable. Due to the intrinsic reactive amino groups, chitosan is vibrant in the midst of other biopolymers. Using the versatility of these amino groups, various structural modifications have been accomplished on chitosan through certain chemical reactions. Chemical modification of chitosan via imine functionalization (RR'CNR″; R: alkyl/aryl, R': H/alkyl/aryl and R″: chitosan ring) is significant as it recommends the resultant chitosan-based Schiff bases (CSBs) for the important applications in the fields like biology, catalysis, sensors, water treatment, etc. CSBs are usually synthesized by the Schiff condensation reaction between chitosan's amino groups and carbonyl compounds with the removal of water molecules. In this review, we first introduce the available synthetic approaches for the preparation of CSBs. Then, we discuss the biological applications of CSBs including antimicrobial activity, anticancer activity, drug carrier ability, antioxidant activity and tissue engineering capacity. Successively, the applications of CSBs in other fields such as catalysis, adsorption and sensors are demonstrated.

Voltage Stimulated Anion Binding of Metalloporphyrin-induced Crystalline 2D Nanoflakes

Voltage-stimulated redox-active materials have received significant attention in the field of organic electronics and sensor technology. Such stimuli-responsive materials trigger the formation of crystalline nanostructures and facilitate the design of efficient smart devices hitherto unknown. Herein, we report that free-base and metallo-tetratolylporphyrin-linked ferrocene derivatives (H₂ TTP-Fc and ZnTTP-Fc) undergo distinct proton/anion binding mechanism in CHCl₃ during bulk electrolysis at applied voltage of 1.4 V to give [H₄ TTP-Fc]⁺ Cl^- and H⁺ [(Cl)ZnTTP-Fc]^- followed by nanospheres and crystalline 2D nanoflakes formation, confirmed by SEM and TEM images, by methanol vapor diffusion (MVD) approach. Moreover, X-ray diffraction analysis suggest that protonated H₂ TTP-Fc aggregates exhibit amorphous nature, whereas H⁺ [(Cl)ZnTTP-Fc]^- depict crystalline nature from layer-by-layer arrangement of nanoflakes assisted by π-π stacking and ion-dipole interactions.

Coupling Self-Assembly Mechanisms to Fabricate Molecularly and Electrically Responsive Films

Biomacromolecules often possess information to self-assemble through low energy competing interactions which can make self-assembly responsive to environmental cues and can also confer dynamic properties. Here, we coupled self-assembling systems to create biofunctional multilayer films that can be cued to disassemble through either molecular or electrical signals. To create functional multilayers, we: (i) electrodeposited the pH-responsive self-assembling aminopolysaccharide chitosan, (ii) allowed the lectin Concanavalin A (ConA) to bind to the chitosan-coated electrode (presumably through electrostatic interactions), (iii) performed layer-by-layer self-assembly by sequential contacting with glycogen and ConA, and (iv) conferred biological (i.e., enzymatic) function by assembling glycoprotein (i.e., enzymes) to the ConA-terminated multilayer. Because the ConA tetramer dissociates at low pH, this multilayer can be triggered to disassemble by acidification. We demonstrate two approaches to induce acidification: (i) glucose oxidase can induce multilayer disassembly in response to molecular cues, and (ii) anodic reactions can induce multilayer disassembly in response to electrical cues.

Aptamer-Patterned Hydrogel Films for Spatiotemporally Programmable Capture and Release of Multiple Proteins

Various hydrogels have been used for protein delivery in the treatment of human diseases. Nevertheless, it is always difficult to control the capture and release of multiple proteins in different regions and periods. This research successfully proves that multiple proteins can be captured and released from the aptamer-patterned hydrogel films with an adjustable release rate at a prospective time and in specific regions utilizing the complementary DNA strand of aptamers via photoclick chemistry and DNA hybridization. The hydrogel film is successfully applied to complex matrixes such as human serum and has excellent cytocompatibility. Thus, the aptamer-patterned hydrogel film will be a good candidate for controlled delivery of multiple proteins.

N-acetylglucosamine affects Cryptococcus neoformans cell-wall composition and melanin architecture

Cryptococcus neoformans is an environmental fungus that belongs to the phylum Basidiomycetes and is a major pathogen in immunocompromised patients. The ability of C. neoformans to produce melanin pigments represents its second most important virulence factor, after the presence of a polysaccharide capsule. Both the capsule and melanin are closely associated with the fungal cell wall, a complex structure that is essential for maintaining cell morphology and viability under conditions of stress. The amino sugar N-acetylglucosamine (GlcNAc) is a key constituent of the cell-wall chitin and is used for both N-linked glycosylation and GPI anchor synthesis. Recent studies have suggested additional roles for GlcNAc as an activator and mediator of cellular signalling in fungal and plant cells. Furthermore, chitin and chitosan polysaccharides interact with melanin pigments in the cell wall and have been found to be essential for melanization. Despite the importance of melanin, its molecular structure remains unresolved; however, we previously obtained critical insights using advanced nuclear magnetic resonance (NMR) and imaging techniques. In this study, we investigated the effect of GlcNAc supplementation on cryptococcal cell-wall composition and melanization. C. neoformans was able to metabolize GlcNAc as a sole source of carbon and nitrogen, indicating a capacity to use a component of a highly abundant polymer in the biospherenutritionally. C. neoformans cells grown with GlcNAc manifested changes in the chitosan cell-wall content, cell-wall thickness and capsule size. Supplementing cultures with isotopically ¹⁵N-labelled GlcNAc demonstrated that the exogenous monomer serves as a building block for chitin/chitosan and is incorporated into the cell wall. The altered chitin-to-chitosan ratio had no negative effects on the mother-daughter cell separation; growth with GlcNAc affected the fungal cell-wall scaffold, resulting in increased melanin deposition and assembly. In summary, GlcNAc supplementation had pleiotropic effects on cell-wall and melanin architectures, and thus established its capacity to perturb these structures, a property that could prove useful for metabolic tracking studies.

Complete prevention of blood loss with self-sealing haemostatic needles

Bleeding is largely unavoidable following syringe needle puncture of biological tissues and, while inconvenient, this typically causes little or no harm in healthy individuals. However, there are certain circumstances where syringe injections can have more significant side effects, such as uncontrolled bleeding in those with haemophilia, coagulopathy, or the transmission of infectious diseases through contaminated blood. Herein, we present a haemostatic hypodermic needle able to prevent bleeding following tissue puncture. The surface of the needle is coated with partially crosslinked catechol-functionalized chitosan that undergoes a solid-to-gel phase transition in situ to seal punctured tissues. Testing the capabilities of these haemostatic needles, we report complete prevention of blood loss following intravenous and intramuscular injections in animal models, and 100% survival in haemophiliac mice following syringe puncture of the jugular vein. Such self-sealing haemostatic needles and adhesive coatings may therefore help to prevent complications associated with bleeding in more clinical settings.

Tough and Cell-Compatible Chitosan Physical Hydrogels for Mouse Bone Mesenchymal Stem Cells in Vitro

Most hydrogels involve synthetic polymers and organic cross-linkers that cannot simultaneously fulfill the mechanical and cell-compatibility requirements of biomedical applications. We prepared a new type of chitosan physical hydrogel with various degrees of deacetylation (DDs) via the heterogeneous deacetylation of nanoporous chitin hydrogels under mild conditions. The DD of the chitosan physical hydrogels ranged from 56 to 99%, and the hydrogels were transparent and mechanically strong because of the extra intra- and intermolecular hydrogen bonding interactions between the amino and hydroxyl groups on the nearby chitosan nanofibrils. The tensile strength and Young's modulus of the chitosan physical hydrogels were 3.6 and 7.9 MPa, respectively, for a DD of 56% and increased to 12.1 and 92.0 MPa for a DD of 99% in a swelling equilibrium state. In vitro studies demonstrated that mouse bone mesenchymal stem cells (mBMSCs) cultured on chitosan physical hydrogels had better adhesion and proliferation than those cultured on chitin hydrogels. In particular, the chitosan physical hydrogels promoted the differentiation of the mBMSCs into epidermal cells in vitro. These materials are promising candidates for applications such as stem cell research, cell therapy, and tissue engineering.

Bio-inspired adhesive catechol-conjugated chitosan for biomedical applications: A mini review

The development of adhesive materials, such as cyanoacrylate derivatives, fibrin glues, and gelatin-based adhesives, has been an emerging topic in biomaterial science because of the many uses of these materials, including in wound healing patches, tissue sealants, and hemostatic materials. However, most bio-adhesives exhibit poor adhesion to tissue and related surfaces due to the presence of body fluid. For a decade, studies have aimed at addressing this issue by developing wet-resistant adhesives. Mussels demonstrate robust wet-resistant adhesion despite the ceaseless waves at seashores, and mussel adhesive proteins play a key role in this adhesion. Adhesive proteins located at the distal end (i.e., those that directly contact surfaces) are composed of nearly 60% of amino acids called 3,4-dihydroxy-l-phenylalanine (DOPA), lysine, and histidine, which contain side chains of catechol, primary amines, and secondary amines, respectively. Inspired by the abundant catecholamine in mussel adhesive proteins, researchers have developed various types of polymeric mimics, such as polyethylenimine-catechol, chitosan-catechol, and other related catecholic polymers. Among them, chitosan-catechol is a promising adhesive polymer for biomedical applications. The conjugation of catechol onto chitosan dramatically increases its solubility from zero to nearly 60mg/mL (i.e., 6% w/v) in pH 7 aqueous solutions. The enhanced solubility maximizes the ability of catecholamine to behave similar to mussel adhesive proteins. Chitosan-catechol is biocompatible and exhibits excellent hemostatic ability and tissue adhesion, and thus, chitosan-catechol will be widely used in a variety of medical settings in the future. This review focuses on the various aspects of chitosan-catechol, including its (1) preparation methods, (2) physicochemical properties, and (3) current applications.

Metals & polymers in the mix: fine-tuning the mechanical properties & color of self-healing mussel-inspired hydrogels

Ways to orchestrate the mechanical properties and colors of mussel-inspired metal cross-linked hydrogels based on DOPA functionalized cationic polymers are demonstrated. This is achieved by systematically varying the hardness of the coordinating metal and/or the cationic polymer.

Anticoagulant surface coating using composite polysaccharides with embedded heparin-releasing mesoporous silica

Release of heparin from the surface of biomaterials is a feasible and efficient manner for preventing blood coagulation because of the high bioactivity of free heparin and a low application dosage compared to intravenous injection of heparin. Here we report a novel method featuring a blend of heparin-loaded SBA-15, catechol-modified chitosan (CCS), and heparin as a heparin-releasing film. The release of heparin was based on its leakage from heparin-loaded amino-functionalized mesoporous silica SBA-15 (SBA-15-NH2), which was controlled by the amino density of the SBA-15-NH2. Heparin-loaded SBA-15-NH2, CCS, and heparin were mixed together, and the mixture was cast onto the surface of a polydopamine-modified substrate, forming a heparin-releasing film on the surface of the substrate. The polydopamine acted as an adhesive interlayer that stabilized the film coated on the substrate. The sustained release rates of heparin from the film ranged from 15.8 to 2.1 μg/cm(2)/h within 8 h. The heparin-releasing film showed low fibrinogen adsorption, platelet adhesion, and hemolysis rate, indicating that it has good blood compatibility. This new approach would be very useful for modifying the surface of versatile blood-contacting biomaterials and ultimately improve their anticoagulation performance.

Dopamine-Mediated Sclerotization of Regenerated Chitin in Ionic Liquid

Chitin is a promising structural material for biomedical applications, due to its many advantageous properties and abundance in nature. However, its usage and development in the biomedical field have been stagnant, because of chitin’s poor mechanical properties in wet conditions and the difficulties in transforming it into an applicable form. To overcome these challenges, we created a novel biomimetic chitin composite. This regenerated chitin, prepared with ionic liquid, showed improved mechanical properties in wet conditions by mimicking insect cuticle and squid beak sclerotization, i.e., catechol-meditated cross-linking. By ionic liquid-based heat treatment, dopamine oxidation produced melanin-like compounds and dopamine-meditated cross-links without any solvent evaporation and oxidant utilization. The dopamine-meditated sclerotization increased the ultimate tensile strength (UTS) of the regenerated chitin by 2.52-fold, measured after six weeks of phosphate-buffered saline (PBS) submersion. In addition, the linear swelling ratio (LSR) of the chitin film was reduced by about 22%. This strategy raises a possibility of using regenerated chitin as an artificial hard tissue in wet conditions.

Interfacial structure of a DOPA-inspired adhesive polymer studied by sum frequency generation vibrational spectroscopy

Marine mussels deposit adhesive proteins containing 3,4-dihydroxyphenylalanine (DOPA) to attach themselves to different surfaces. Isolating such proteins from biological sources for adhesion purposes tends to be challenging. Recently, a simplified synthetic adhesive polymer, poly[(3,4-dihydroxystyrene)-co-styrene] (PDHSS), was developed to mimic DOPA-containing proteins. The pendant catechol group in this polymer provides cross-linking and adhesion much like mussel proteins do. In this work, sum frequency generation (SFG) vibrational spectroscopy was applied to reveal the structures of this DOPA-inspired polymer at air, water, and polymer interfaces. SFG spectroscopy results showed that when underwater, the catechol rings and the quinone rings were ordered, ready to adhere to surfaces. At the hydrophobic polystyrene interface, benzene π-π stacking is likely the adhesive force, whereas at the hydrophilic poly(allylamine) interface, primary amines may form hydrogen bonds with catechol or react with quinones for adhesion.

Catechol-based biomimetic functional materials

Catechols are found in nature taking part in a remarkably broad scope of biochemical processes and functions. Though not exclusively, such versatility may be traced back to several properties uniquely found together in the o-dihydroxyaryl chemical function; namely, its ability to establish reversible equilibria at moderate redox potentials and pHs and to irreversibly cross-link through complex oxidation mechanisms; its excellent chelating properties, greatly exemplified by, but by no means exclusive, to the binding of Fe(3+); and the diverse modes of interaction of the vicinal hydroxyl groups with all kinds of surfaces of remarkably different chemical and physical nature. Thanks to this diversity, catechols can be found either as simple molecular systems, forming part of supramolacular structures, coordinated to different metal ions or as macromolecules mostly arising from polymerization mechanisms through covalent bonds. Such versatility has allowed catechols to participate in several natural processes and functions that range from the adhesive properties of marine organisms to the storage of some transition metal ions. As a result of such an astonishing range of functionalities, catechol-based systems have in recent years been subject to intense research, aimed at mimicking these natural systems in order to develop new functional materials and coatings. A comprehensive review of these studies is discussed in this paper.

Electrodeposition of a biopolymeric hydrogel: potential for one-step protein electroaddressing

The electrodeposition of hydrogels provides a programmable means to assemble soft matter for various technological applications. We report an anodic method to deposit hydrogel films of the aminopolysaccharide chitosan. Evidence suggests the deposition mechanism involves the electrolysis of chloride to generate reactive chlorine species (e.g., HOCl) that partially oxidize chitosan to generate aldehydes that can couple covalently with amines (presumably through Schiff base linkages). Chitosan's anodic deposition is controllable spatially and temporally. Consistent with a covalent cross-linking mechanism, the deposited chitosan undergoes repeated swelling/deswelling in response to pH changes. Consistent with a covalent conjugation mechanism, proteins could be codeposited and retained within the chitosan film even after detergent washing. As a proof-of-concept, we electroaddressed glucose oxidase to a side-wall electrode of a microfabricated fluidic channel and demonstrated this enzyme could perform electrochemical biosensing functions. Thus, anodic chitosan deposition provides a reagentless, single-step method to electroaddress a stimuli-responsive and biofunctionalized hydrogel film.