ZnO nano reactor on textiles and polymers: ex situ and in situ synthesis, application, and characterization

Green Nanoengineered Fabrics: Waste-Derived Polyphenol-Zinc@ Silica Core-Shell Reactive Janus Nanoparticles for Functional Fabrics

Fabricating Janus nanoparticle-functionalized fabrics with UV protection, strength enhancement, self-cleaning properties, and wash durability, with a biocompatible nature, is crucial in modern functional fabrics engineering. Particularly, tailoring multifunctional nanoparticles capable of exhibiting several distinct properties, utilizing low-cost raw materials, and adhering to green chemistry principles is pivotal. A fabrication strategy for developing multifunctional reactive Janus nanoparticles, utilizing waste-derived natural polyphenol (quercetin-3-glucuronide, myricetin-3-galactoside, gossypin, phlorizin, kaempferol, myricetin-3-arabinoside)-integrated zinc-silica core-shell Janus nanoparticles with UV protection, strength enhancement, and self-cleaning properties, is proposed. Polyphenols were utilized as sustainable precursors for synthesizing zinc-polyphenol complexes, which were then encapsulated within a silica shell to form a core-shell structure. Furthermore, Janus particles were created by introducing a bifunctional layer with half amine/carboxylic acid and half methyl terminals, imparting reactive hydrophilic and hydrophobic properties. Janus-coated textiles and leather exhibited significant attenuation of harmful UV radiation, with water contact angle measurements confirming improved water repellency. The coexistence of natural phenols and bifunctional groups within a material bolstered textile strength, fostering superior adhesion and markedly enhancing wash durability. This eco-friendly approach, utilizing waste-derived materials, presents a promising solution for sustainable textile engineering with enhanced performance in UV protection and water resistance, thereby contributing to the advancement of green nanotechnology in textile applications.

Continuous preparation and antibacterial mechanisms of biodegradable polylactic acid/nano-zinc oxide/additives antibacterial non-wovens

Biodegradable polylactic acid (PLA)/nano‑zinc oxide (ZnO)/additives non-woven slices were prepared by melt blending method. The effects of antibacterial agent nano-ZnO, antioxidant pentaerythrityl tetrakis-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate (1010), and chain extender multi-functional epoxy (ADR), on the melt flow rate, mechanical properties, thermal stabilities and micromorphology of the slices were investigated. The melt flow rate decreased from 26.94 g/10 min to 17.76 g/10 min, and the tensile strength increased from 10.518 MPa to 30.427 MPa with the increase of nano-ZnO and additives content. The slices were further spunbonded. The wettability and antibacterial properties of PLA/nano-ZnO/additives antibacterial non-wovens were studied, and the antibacterial action mechanism was clarified. The results showed that the biodegradable PLA/nano-ZnO/additives antibacterial non-wovens were prepared continuously successfully. The prepared non-woven fabrics exhibited good hydrophobicity and antibacterial properties. The mechanism study shows that zinc ion produced by nano-ZnO and photocatalytic reaction make the fabrics have good antibacterial activity at low nano-ZnO content. When nano-ZnO concentration reaches 1.5 wt%, the antibacterial rate against Escherichia coli and Staphylococcus aureus reaches 98.52 % and 98.13 %, respectively.

Plasmonic photocatalytic nanocomposite of in-situ synthesized MnO2 nanoparticles on cellulosic fabric with structural color

The textile industry produces 20 % of the industrial water pollution containing toxic substances mostly dyes. Reducing material consumption and developing more efficient and scalable textile waste-water treatment methods such as photocatalytic degradation is essential. In this work, manganese dioxide nanoparticles (MnO2 NPs) were synthesized on the cotton fabric via a facile in-situ process. The preparation process was optimized for the highest photocatalytic activity under sunlight and color change originating from the plasmonic structural color of the nanoparticles. This promotes the photocatalytic activity by delocalization of the hot electrons while demonstrating the best washing and light fastness by using the least chemicals, and energy in a short time. In this way, the fabric was colored without any dye and possessed robust photocatalytic activity. Further, no dye-containing waste-water is made, and also accomplished to degrade dyes in a few hours under sunlight which is substantial for sustainable development. The treated fabrics indicated favorable mechanical properties, enhanced thermal stability, and perfect biocompatibility.

Enhancing the multifunctional properties of cellulose fabrics through in situ hydrothermal deposition of TiO2 nanoparticles at low temperature for antibacterial self-cleaning under UV-Vis illumination

This study aimed to improve the multifunctional properties (including photocatalysis, stability reusability, self-cleaning, antibacterial effects, and thermal radiation shielding) of cellulose fabrics through incorporation of TiO2 nanoparticles. To achieve this, anatase TiO2 nanoparticles were synthesized in situ and deposited onto cotton fabrics through hydrothermal method. The presence of TiO2 nanoparticles in cellulose fabrics greatly enhanced the photocatalytic efficiency and adsorption range and did not damage the fabric fibers. The TiO2-coated cotton exhibited an outstanding photocatalytic efficiency, with dye removal rates of 92.20 % ± 0.015 % and 99.68 % ± 0.002 % under UV-A and visible illumination, respectively. In addition, the material exhibited thermal radiation shielding properties, in which no heat absorption was observed within 60 min at 40 °C-70 °C. To further enhance the hydrophobicity, the TiO2-coated cotton was surface-modified with 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDTS). The resulting PFDTS/TiO2-coated cotton was superhydrophobic with a water contact angle of 156.50° ± 0.05° with a sliding angle of 4.33° ± 0.47° and roughness of 67.35 nm. The superhydrophobicity of the PFDTS/TiO2-coated cotton also facilitated self-cleaning through water injection to remove soil impurities. Furthermore, the PFDTS/TiO2-coated cotton exerted antibacterial effects against gram-negative (Escherichia coli) and gram-positive (Staphylococcus aureus) bacteria under UV-A or visible illumination. These nanocomposite fabrics with multifunctional properties have potential for industrial, military, and medical applications.

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

Piezoelectric Nanogenerators Fabricated Using Spin Coating of Poly(vinylidene fluoride) and ZnO Composite

In this context, the open-circuit voltage generated by either poly (vinylidene fluoride) or PVDF and ZnO composite sample before being enhanced to 4.2 V compared to 1.2 V for the samples of pure PVDF. The spin coating method was used to create a composite film, which served as a piezoelectric nanogenerator (PNG). Zinc oxide (ZnO) nanoparticles and PVDF serve as the matrix for the coating structure. Thin films were created that employed the spin coating method to achieve the desired results of ZnO's non-brittle outcome and piezoelectric characteristics, as well as PVDF for use in self-powered devices. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and fourier transform infrared (FT-IR) were used to evaluate the properties of these formations. The electrical properties of the film were measured using an oscilloscope. Results indicated that by adding ZnO nanoparticles to the PVDF samples, piezoelectric capabilities were enhanced compared to samples containing PVDF only. These results point to promising uses for various wearable devices, such as water strider robot systems and self-operating equipment.

An In-Situ Fabrication Method of ZnO and Other Zn(II) Compounds Containing Polypropylene Composites

This study investigated the methods of preparation of zinc oxide-polypropylene nanocomposites and their antibacterial properties. Seven solutions with ZnO nanoparticles or zinc ions were formulated as a PP additive. Two methods of ZnO NPs syntheses were carried out: (1) a modified hydrothermal method where a water solution of zinc acetate dihydrate, PEI, and ammonia were mixed with a final pH 11; (2) a thermal decomposition of a water solution of zinc acetate in the presence of PEI and ammonia using a two-screw extruder. During the experiments, the influence of various amounts of particle stabilizer, heating of the solutions, and the temperatures of the syntheses were examined. As a result, the simultaneous crystallization of ZnO in the extrusion process confirmed this method's attractiveness from the application point of view. Fabricated PP-ZnO composite shows antibacterial properties against Staphylococcus aureus, Escherichia coli, and Klebsiella pneumoniae.

Ultrasonic assisted synthesis of RGO supported HoVO4-ZnO nanocomposites, their enhanced photocatalytic activities and Rhodamine B degradation

The RGO-supported HoVO₄-ZnO nanocomposite was synthesized using the ultra sonication process. X-ray diffraction patterns, Field emission scanning electron microscopy, high resolution transmission electron microscopy, Diffractive Reflectance spectroscopy, and photoluminescence spectroscopy were employed to examine the heterostructured photocatalyst in this research study. The photocatalytic efficiency of the RGO-supported HoVO₄-ZnO nanoparticles, under UV light irradiation, in the degradation of Rhodamine-B dye was investigated. Undoped ZnO, bare HoVO4, and HoVO₄ -ZnO, degraded at 55.6, 57.5, and 74.33 percent in 45 min, respectively. This new RGO coupled HoVO₄-ZnO exhibits enhanced photocatalytic efficiency compared to the bare ZnO and HoVO₄-ZnO nanocomposite.

Cesium ion adsorption and desorption on electrospun mesoporous silica nanofibers immobilized with Prussian blue

To fabricate an efficient Cs ion adsorbent and prevent unexpected loss of Prussian blue (PB) colloidal particles during use, PB was immobilized on the surface of electrospun mesoporous silica nanofibers (MSFs) via a newly developed method of double exposure to Fe (III) ions. To introduce PB on MSFs, the MSFs were functionalized with ethylenediamine moiety to bind to Fe (III) ions, which would firmly anchor PB. MSFs were pretreated with Fe (III) ions and exposed to K₄ [Fe(II) (CN)₆] to form PB. We found that this process did not provide a sufficient PB amount on the MSFs. To increase the PB amount, after initial PB formation, the MSFs were treated with Fe (III) ions again so that the unreacted K₄ [Fe(II) (CN)₆] remaining on the MSFs could become PB. An investigation of the adsorption isotherms and kinetics of the nanofibrous adsorbent indicated that monolayer chemisorption had occurred. The maximum Cs ion adsorption capacity using the method of double exposure to Fe (III) ions was determined to be 14.66 mg/g, which was higher by a factor of 2.24 than the case that was not prepared by this method. Cs ions were selectively adsorbed over other cations and could be removed in both acidic and basic conditions, presumably because of the robust MSFs.

Importance of Protocol Design for Suitable Green In Situ Synthesis of ZnO on Cotton Using Aqueous Extract of Japanese Knotweed Leaves as Reducing Agent

This work presents two protocols for the green in situ synthesis of zinc oxide nanoparticles (ZnO-NP) on cotton with the aim to develop sustainable cotton fabric with an ultraviolet protection factor (UPF). The protocols differed in the order of immersing cotton fabric in reactive solutions of three batches, i.e., precursor (0.1 M zinc acetate dihydrate), reducing agent (aqueous extract of Japanese knotweed leaves) and alkali (wood ash waste). The scanning electron microscope (SEM) results showed that ZnO-NP were successfully synthesised on cotton using both protocols; however, only the protocol where cotton was first immersed in alkali, then in the precursor and, lastly, in the reducing agent enabled very high UPF and higher amount of Zn present on the sample. Due to the different order of cotton fabric immersion in the reactive solutions, dissimilar morphology of the ZnO particles was observed, which resulted in different UV blocking abilities of the samples. The antioxidant analysis (DPPH) showed that the natural reducing agent prepared from Japanese knotweed leaves has very high antioxidant activity, which is attributed to phenolic compounds present in the plant. The reflectance spectroscopy results confirmed that the colour yield and colour of the samples did not influence the UPF value. This protocol is an example of green circular economy where waste materials of invasive alien plant species and pellet heating was used as a natural source of phytochemicals, for the direct synthesis of ZnO-NP to develop cotton fabric with UV-protective properties.

Facile In Situ Synthesis of ZnO Flower-like Hierarchical Nanostructures by the Microwave Irradiation Method for Multifunctional Textile Coatings

ZnO nanoparticle-based multifunctional coatings were prepared by a simple, time-saving microwave method. Arginine and ammonia were used as precipitation agents, and zinc acetate dehydrate was used as a zinc precursor. Under the optimized conditions, flower-like morphologies of ZnO aggregates were obtained. The prepared nanopowders were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and UV/Visible spectroscopy. The developed in situ synthesis with microwave irradiation enabled significant ZnO nanoparticle deposition on cotton fabrics, without additional steps. The functionalized textiles were tested as a photocatalyst in methylene blue (MB) photodegradation and showed good self-cleaning and UV-blocking properties. The coated cotton fabrics exhibited good antibacterial properties against common microbial trains (Staphylococcus aureus, Escherichia coli, and Candida albicans), together with self-cleaning and photocatalytic efficiency in organic dye degradation. The proposed microwave-assisted in situ synthesis of ZnO nanocoatings on textiles shows high potential as a rapid, efficient, environmentally friendly, and scalable method to fabricate functional fabrics.

Novel Green In Situ Synthesis of ZnO Nanoparticles on Cotton Using Pomegranate Peel Extract

This work presents the novel and entirely green in situ synthesis of zinc oxide nanoparticles (ZnO-NP) on cotton fabric. Pomegranate peel extract was used as a reducing agent and wood ash extract was used as an alkali source for the formation of ZnO-NP from zinc acetate. Four different synthesis methods, which varied in drying between immersion of fabric in the active solutions for synthesis and the use of padding and ultrasonication, were investigated to evaluate the most suitable one to achieve excellent ultraviolet (UV) protective properties of the functionalized textile. For comparison, the cotton fabrics were also functionalized with each active solution separately or in a combination of two (i.e., Zn-acetate and plant extract). Scanning electron microscopy (SEM), inductively coupled plasma mass spectroscopy (ICP-MS), Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) analysis, and atomic force microscopy (AFM) confirm the successful formation of ZnO-NP on cotton. Among the synthesis methods, the method that included continuous drying of the samples between immersion in the active solutions for synthesis (Method 4) was found to be the most suitable to deliver uniformly impregnated cotton fibers with numerous small ZnO wurtzite structured crystals and excellent UV protection, with a UV protection factor of 154.0. This research presents an example of a green circular economy where a bio-waste material can be used to produce ZnO-NP directly on cotton at low temperatures and short treatment times without the addition of chemicals and enables the production of cellulosic fabrics with excellent UV protection.

Recent Advances on Antimicrobial and Anti-Inflammatory Cotton Fabrics Containing Nanostructures

Hydrophilic cotton textiles, used in hospitals and sportswear, are prone to the growth of microorganisms (bacteria, fungi) resulting in hygiene and health risks. Thus, healthcare concerns have motivated the interest for the development of multifunctional antimicrobial cotton fabrics. Moreover, cotton textiles are also used in medical applications such as wound dressings. Their functionalization with anti-inflammatory agents is desirable in order to accelerate cicatrisation in the treatment of chronic wounds. This review summarizes recent advances (from January 2016 to January 2021) on the modification and coating of cotton fabrics with nanostructures (mainly metal and metal oxide nanoparticles, functionalized silica nanoparticles) to provide them antimicrobial (antibacterial and antifungal) and anti-inflammatory properties.

Suppressed photocatalytic activity of ZnO based Core@Shell and RCore@Shell nanostructure incorporated in the cellulose nanofiber

The protection of skin cells against intense ultra-violet (UV) rays is of greater concern and needs immediate attention. Sustainable efforts and strategies are in progress to minimize the factors that adversely affect skin cells. Herein, we synthesized zinc oxide (ZnO) in the form of core-shell (Core@Shell) or reverse core-shell (RCore@Shell) structure where silica was synthesized as a shell or core, respectively on the surface of cellulose nanofiber (CNF). Both cases exhibited much higher UV-blocking performance as well as alleviate the whitening effect because these particles retain their nanoscale dimensions as favored by the cosmetic industry. Significantly, these nanostructures shows the less photocatalysis activity than that of pristine ZnO nanoparticles. And we found that the photocatalytic activity of ZnO in RCore@Shell/CNF was more suppressed that Core@Shell/CNF, showing that it is a proper structure to neutralize or scavenge free radicals prior to their exit from the particles. Our results suggest that, reduction in photocatalysis induced by Core@Shell/CNF and RCore@Shell/CNF nanostructures is a promising strategy for skincare products in cosmetic industry.

Textiles Functionalized with ZnO Nanoparticles Obtained by Chemical and Green Synthesis Protocols: Evaluation of the Type of Textile and Resistance to UV Radiation

The study evaluates five types of commercial textiles with different cotton and polyester contents widely used in the garment industry. These textile samples have been subjected to treatment by the exhaustion method using zinc oxide nanoparticles (NP ZnO) (textile functionalization) with the aim of improving their efficiency in blocking UV radiation. The ZnO nanoparticles have been obtained by two methods: The green or also called biosynthesis (using the extract of Coriandrum sativum as an organic reducing agent), and the chemical method (using NaOH as an inorganic reducing agent). The results related to the green method show having achieved a defined geometric configuration with an average size of 97.77 nm (SD: 9.53). On the contrary, the nanostructures obtained by the chemical method show pentagonal configurations with average sizes of 113 nm (SD: 6.72). The textiles functionalized with NP ZnO obtained by biosynthesis showed a better efficiency in blocking ultraviolet radiation (UV).

Antibacterial Cotton Fabric Functionalized with Copper Oxide Nanoparticles

Textiles functionalized with cupric oxide (CuO) nanoparticles have become a promising option to prevent the spread of diseases due to their antimicrobial properties, which strongly depend on the structure and morphology of the nanoparticles and the method used for the functionalization process. This article presents a review of work focused on textiles functionalized with CuO nanoparticles, which were classified into two groups, namely, in situ and ex situ. Moreover, the analyzed bacterial strains, the resistance of the antimicrobial properties of textiles to washing processes, and their cytotoxicity were identified. Finally, the possible antimicrobial mechanisms that could develop in Gram-positive and Gram-negative bacteria were described.

A review on nanotoxicity and nanogenotoxicity of different shapes of nanomaterials

Nanomaterials (NMs) generally display fascinating physical and chemical properties that are not always present in bulk materials; therefore, any modification to their size, shape, or coating tends to cause significant changes in their chemical/physical and biological characteristics. The dramatic increase in efforts to use NMs renders the risk assessment of their toxicity highly crucial due to the possible health perils of this relatively uncharted territory. The different sizes and shapes of the nanoparticles are known to have an impact on organisms and an important place in clinical applications. The shape of nanoparticles, namely, whether they are rods, wires, or spheres, is a particularly critical parameter to affect cell uptake and site-specific drug delivery, representing a significant factor in determining the potency and magnitude of the effect. This review, therefore, intends to offer a picture of research into the toxicity of different shapes (nanorods, nanowires, and nanospheres) of NMs to in vitro and in vivo models, presenting an in-depth analysis of health risks associated with exposure to such nanostructures and benefits achieved by using certain model organisms in genotoxicity testing. Nanotoxicity experiments use various models and tests, such as cell cultures, cores, shells, and coating materials. This review article also attempts to raise awareness about practical applications of NMs in different shapes in biology, to evaluate their potential genotoxicity, and to suggest approaches to explain underlying mechanisms of their toxicity and genotoxicity depending on nanoparticle shape.

Re-stickable All-Solid-State Supercapacitor Supported by Cohesive Thermoplastic for Textile Electronics

The textile-based flexible electronic device has attracted considerable attention due to its excellent conformability, skin affinity, and compatibility with the clothing industry. However, the machine-washing process may damage the electronic components, further resulting in the failure of the device. Herein, parafilm, a commercially available cohesive thermoplastic, is introduced as both a substrate and encapsulating material to fabricate an all-solid-state supercapacitor, which could be tightly stuck on and easily peeled off from a fabric. The supercapacitor possesses excellent capacitive behavior (73.7 F/g at a current density of 1 A/g), long cycle life (capacitance retention >90% after 5000 cycles), and great flexibility (capacitance retention >98% after 100 times of bending/twisting). After water flushing and soaking, the capacitance of the supercapacitor could be retained at about 98% of its original level. A parafilm-based piezoresistive sensor with good pressure-sensing performance has also been fabricated via the same approach to demonstrate the universality of the proposed strategy for textile re-stickable electronics. This work may not only fabricate novel flexible electronic systems for wearable applications but also provide a universal strategy to address the machine-washing issues in textile electronics.

Development of agri-biomass based lignin derived zinc oxide nanocomposites as promising UV protectant-cum-antimicrobial agents

A green and one-step synthesis of agri-biomass lignin derived zinc oxide nanocomposites has been achieved, which exhibited excellent antimicrobial and UV-protection potential.

Surface modification of poly(vinyl alcohol) sponge by acrylic acid to immobilize Prussian blue for selective adsorption of aqueous cesium

Prussian blue (PB) is known to be an effective cesium adsorbent, but the direct application of PB is limited by the difficulty of its recovery from solution. In this study, PB was immobilized on a porous support media, poly(vinyl alcohol) (PVA) sponge, for use as a selective material for cesium adsorption. The commercially available PVA sponge was functionalized by the addition of poly(acrylic acid) (PAA) (i.e., PAA-PVA) to enhance the PB immobilization, which increased both PB loading and binding strength. The AA functionalization changed the major functional groups from hydroxyl to carboxylic, as confirmed by Fourier-transform infrared spectroscopy. PB was further synthesized in the PAA-PVA using layer-by-layer (LBL) assembly, which contributed to more stable PB formation, and reduced detachment of PB during washing. The prepared adsorbent, PAA-L@PVA-PB, was tested for cesium adsorption capability. Cesium adsorption was equilibrated within three hours, and the maximum cesium adsorption capacity was 4.082 mg/g, which was 5.7 times higher than Pure-L@PVA-PB. The observed decrease in solution pH during cesium adsorption inhibited overall cesium uptake, however, this was minimized by buffering. The prepared PAA-L@PVA-PB was used as a column filling material and its potential use as a countermeasure for removing radioactive cesium from a contaminated water stream was demonstrated.

Dimensionally stable cellulosic aerogels functionalized by titania

The study is aimed at imparting dimensional stability and some functionalities to cellulosic aerogels. The polysaccharide suffers from mechanical strength loss in wetted state that restricts its application. Improvement is achieved by mean of microfibrillation of cellulosic fibers combining intense mechanical treatment with freeze-thawing. Addition of the latter decreases the number of cycles. Aerogels prepared from microfibrillated cellulose by freeze-drying hold their dimensional stability in solutions that makes possible treating them chemically without loss in shape. Here a method of directional sol-gel processing is applied to mineralize such aerogels by titania. Owing to covalent bonds to cellulose macromolecules formed via the condensation reactions, titania coating possesses good adhesion, not separating at heating when it is transferred in anatase form. Its photocatalytic activity results in self-cleaning of cellulose aerogels under outdoor sunlight irradiation. Calcination in air or carbonization in an inert gas atmosphere can serve to prepare metal oxide or composites with carbon of various shape and dimensionality.

Efficient coverage of ZnO nanoparticles on cotton fibres for antibacterial finishing using a rapid and low cost in situ synthesis

Antibacterial fabric using a simple, reproducible and low cost technique to synthesize high-quality ZnONPs was prepared and characterized.

Homogeneous grafting of cellulose with polycaprolactone using quaternary ammonium salt systems and its application for ultraviolet-shielding composite films

Microcrystalline cellulose grafted polycaprolactone (MCC-g-PCL) was successfully synthesized by ring-opening copolymerization catalyzed by 4-dimethylaminopyridine in a dual tetrabutylammonium acetate/dimethyl sulfoxide solvent system. A novel ultraviolet-shielding film based on MCC-g-PCL was prepared by introducing graphene oxide (GO). The results obtained showed that the introduction of GO not only obviously influenced the inherent structure of the MCC-g-PCL but remarkably changed the surface morphology of the composite film. Moreover, the GO/MCC-g-PCL composite showed a significant improvement in tensile strength, from 2.63 to 4.55 MPa, as well as elongation-at-break, from 6.4% to 15.5%, compared with the pure MCC-g-PCL film, owing to the strong hydrogen-bonding interaction that physically crosslinked GO with MCC-g-PCL. Importantly, GO/MCC-g-PCL composite films offered an effective high-energy light-shielding capacity; in particular MCC-g-PCL film containing 1.0 wt% GO possessed good absorbance between 200 nm and 300 nm. This study provides a framework for developing cellulose-based ultraviolet-shielding polymers and better understanding the ultraviolet-shielding mechanism.

Microcrystalline cellulose graft polycaprolactone (MCC-g-PCL) was successfully synthesized by ring-opening copolymerization catalyzed by 4-dimethylaminopyridine in a dual tetrabutylammonium acetate/dimethyl sulfoxide solvent system.

Multifunctional properties of cotton fabrics coated with in situ synthesis of zinc oxide nanoparticles capped with date seed extract

In situ formation of zinc oxide nanoparticles (ZnO-NPs) was studied within the framework of several factors. variables examined include (i) innovation of a new capping agent; (ii) nature of the cotton fabric related to its processing; (iii) formation of Zinc hydroxide (Zn(OH)₂) due to reduction of zinc acetate with sodium hydroxide (iv) treatment of the differently processed cotton fabrics with (Zn(OH)₂) functionalized dispersion as per the exhaustion method, (v) further treatment of the cotton fabrics with (Zn(OH)₂) dispersion according to the pad-dry-cure method and (Vi) conversion of (Zn(OH)₂) to ZnO-NPs during the curing step in the latter method. Results depict that the incorporation of the bio-extract obtained from date seed waste works effectively as capping material which stabilize ZnO-NPs. Mercerized bleached cotton fabric proves to be a better candidate than mercerized loomstate cotton fabric in conferring sustainable bactericidal and UV blocking.

Ultrasound irradiation based in-situ synthesis of star-like Tragacanth gum/zinc oxide nanoparticles on cotton fabric

Application of natural biopolymers for green and safe synthesis of zinc oxide nanoparticles on the textiles is a novel and interesting approach. The present study offers the use of natural biopolymer, Tragacanth gum, as the reducing, stabilizing and binding agent for in-situ synthesis of zinc oxide nanoparticles on the cotton fabric. Ultrasonic irradiation leads to clean and easy synthesis of zinc oxide nanoparticles in short-time at low-temperature. FESEM/EDX, XRD, FT-IR spectroscopy, DSC, photocatalytic activities and antimicrobial assay are used to characterize Tragacanth gum/zinc oxide nanoparticles coated cotton fabric. The analysis confirmed synthesis of star-like zinc oxide nanoparticles with hexagonal wurtzite structure on the cotton fabric with the average particle size of 62nm. The finished cotton fabric showed a good photocatalytic activity on degradation of methylene blue and 100% antimicrobial properties with inhibition zone of 3.3±0.1, 3.1±0.1 and 3.0±0.1mm against Staphylococcus aureus, Escherichia coli and Candida albicans.

Silver nanomaterials as future colorants and potential antimicrobial agents for natural and synthetic textile materials

Over the past few years, antimicrobial textiles have gained considerable interest for use in different application fields.

Drosophila melanogaster as a suitable in vivo model to determine potential side effects of nanomaterials: A review

Despite being a relatively new field, nanoscience has been in the forefront among many scientific areas. Nanoparticle materials (NM) present interesting physicochemical characteristics not necessarily found in their bulky forms, and alterations in their size or coating markedly modify their physical, chemical, and biological properties. Due to these novel properties there is a general trend to exploit these NM in several fields of science, particularly in medicine and industry. The increased presence of NM in the environment warrants evaluation of potential harmful effects in order to protect both environment and human exposed populations. Although in vitro approaches are commonly used to determine potential adverse effects of NM, in vivo studies generate data expected to be more relevant for risk assessment. As an in vivo model Drosophila melanogaster was previously found to possess reliable utility in determining the biological effects of NM, and thus its usage increased markedly over the last few years. The aims of this review are to present a comprehensive overview of all apparent studies carried out with NM and Drosophila, to attain a clear and comprehensive picture of the potential risk of NM exposure to health, and to demonstrate the advantages of using Drosophila in nanotoxicological investigations.

A robust super-paramagnetic TiO2:Fe3O4:Ag nanocomposite with enhanced photo and bio activities on polyester fabric via one step sonosynthesis

High intensity ultrasound was used for the synthesis and simultaneous deposition of TiO2:Fe3O4:Ag nanocomposites on polyester surface providing a feasible route for imparting magnetic and enhanced antibacterial and self-cleaning activities with controllable hydrophilicity/hydrophobicity at low temperature. Synergistic impact of sonochemistry and physical effects of ultrasound originating from implosive collapse of bubbles were responsible for the formation and adsorption of nanomaterials on the fabric surface during ultrasound irradiation. The increase in photocatalytic activity of TiO2 was obtained attributing to the co-operation of iron oxide and silver nanoparticles nucleated on TiO2 surface boosting the electron-hole pair separation and prolonging their recombination rate. The process was further optimized in terms of reagents concentrations including Fe(2+)/TiO2 and Ag/TiO2 molar ratios using central composite design in order to achieve the best self-cleaning property of the treated fabric. The magnetic measurements indicated the super-paramagnetic behavior of the treated fabric with saturation magnetization of 4.5 (emu/g). Findings suggest the potential of the proposed facial method in producing an intelligent fabric with durable multi-functional activities that can be suitable for various applications including medical, military, bio-separation, bio-sensors, magneto graphic printing, magnetic screens and magnetic filters.

Zinc oxide nanostructure-modified textile and its application to biosensing, photocatalysis, and as antibacterial material

Recently, one-dimensional nanostructures with different morphologies (such as nanowires, nanorods (NRs), and nanotubes) have become the focus of intensive research, because of their unique properties with potential applications. Among them, zinc oxide (ZnO) nanomaterials has been found to be highly attractive, because of the remarkable potential for applications in many different areas such as solar cells, sensors, piezoelectric devices, photodiode devices, sun screens, antireflection coatings, and photocatalysis. Here, we present an innovative approach to create a new modified textile by direct in situ growth of vertically aligned one-dimensional (1D) ZnO NRs onto textile surfaces, which can serve with potential for biosensing, photocatalysis, and antibacterial applications. ZnO NRs were grown by using a simple aqueous chemical growth method. Results from analyses such as X-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed that the ZnO NRs were dispersed over the entire surface of the textile. We have demonstrated the following applications of these multifunctional textiles: (1) as a flexible working electrode for the detection of aldicarb (ALD) pesticide, (2) as a photocatalyst for the degradation of organic molecules (i.e., Methylene Blue and Congo Red), and (3) as antibacterial agents against Escherichia coli. The ZnO-based textile exhibited excellent photocatalytic and antibacterial activities, and it showed a promising sensing response. The combination of sensing, photocatalysis, and antibacterial properties provided by the ZnO NRs brings us closer to the concept of smart textiles for wearable sensing without a deodorant and antibacterial control. Perhaps the best known of the products that is available in markets for such purposes are textiles with silver nanoparticles. Our modified textile is thus providing acceptable antibacterial properties, compared to available commercial modified textiles.