Phase Separation of Aqueous Poly(2-dimethylaminoethyl methacrylate-block-N-vinylcaprolactams)

Tailoring thermoresponsiveness of biocompatible polyethers: copolymers of linear glycerol and ethyl glycidyl ether

Linear polyglycerol is known as a highly hydrophilic and biocompatible polymer that is currently considered for numerous medical applications. Derived from this well-known structure, the synthesis of highly biocompatible, thermoresponsive polyether copolymers via statistical anionic ring-opening copolymerization of ethyl glycidyl ether (EGE) and ethoxy ethyl glycidyl ether (EEGE) is described. Subsequent deprotection of the acetal groups of EEGE yields copolymers of linear glycerol (linG) and EGE, P(linG-co-EGE). These copolymers showed monomodal and narrow molecular weight distributions with dispersities Đ ≤ 1.07. The microstructure was investigated via in situ¹H NMR kinetics experiments, revealing reactivity ratios of r_EEGE = 1.787 ± 0.007 and r_EGE = 0.560 ± 0.002, showing a slightly favored incorporation of EEGE over EGE. Due to the deliberate incorporation of rather hydrophobic EGE units into the water soluble linPG, tunable thermoresponsive behavior is achieved with cloud point temperatures T_cp between 9.0-71.4 °C. Besides the commonly utilized method turbidimetry, temperature-dependent ¹H NMR measurements were used for more accurate and reproducible results. The change of the hydrodynamic radii r_H of the copolymers and their aggregates upon reaching T_cp was investigated via DOSY NMR spectroscopy. To explore possible biomedical applications, as an example, the cell viability and immunology of an exemplary P(linG-co-EGE) copolymer sample was investigated. Since both, cell viability and immunology are comparable to the gold standard PEG, the herein presented copolymers show high potential as biocompatible and thermoresponsive alternatives to PEG for biomedical applications.

Tunable Thermo-Responsive Properties of Hydroxybutyl Chitosan Oligosaccharide

In this study, a simple method was used to synthesize novel thermosensitive hydroxybutyl chitosan oligosaccharide (HBCOS) by introducing hydroxybutyl groups to C₆–OH of chitosan oligosaccharide (COS) chain. The variation in light scattering demonstrated that HBCOS had good thermosensitive properties and the particle size of HBCOS changed from 2.21–3.58 to 281.23–4,162.40 nm as the temperature increased to a critical temperature (LCST). The LCST of HBCOS (10 mg/ml) decreased from 56.25°C to 40.2°C as the degrees of substitution (DSs) increased from 2.96 to 4.66. The LCST of HBCOS with a DS of 4.66 decreased to 33.5°C and 30°C as the HBCOS and NaCl concentrations increased to 50 mg/ml and 4% (w/v), respectively. Variable-temperature FTIR spectroscopy confirmed that dehydration of hydrophobic chains and the transition of hydrogen bonds were the driving forces for the phase transition of HBCOS. Moreover, HBCOS was not cytotoxic at different concentrations. This work generated a novel thermosensitive HBCOS with tunable thermoresponsive properties and excellent biocompatibility, which may be a potential nanocarrier for the biomedical application.

Photoluminescent polymer micelles with thermo-/pH-/metal responsibility and their features in selective optical sensing of Pd(ii) cations

Photoluminescent polymers can be divided into two types of structures: one is the well-known conventional π-conjugated rigid chain polymers bearing π-conjugated chromophores in their side chains, and the other is the common flexible polymers without π-conjugated chromophores in their main or side chains but with a feature of clustering electron-rich and/or dipole groups in their main and/or side chains. In this work, we found a new photoluminescent polymer comprising theophylline (T) and imidazole (I) residues in a suitable ratio in the side chains on the common polystyrenic block (PVB-T/I). We synthesized a block copolymer (denoted as P2) consisting of hydrophobic PVB-T/I and hydrophilic poly(N-isopropylacrylamide), and we investigated its self-assembly into micelles and their micellar features, such as thermo-responsibility, fluorescence emission, pH, and metal ion-dependent photoluminescence, in detail. Especially, the micelles self-assembled from P2 showed intrinsic blue emission which was emitted from the charge transfer association between T and I residues in the intra-chains. Weakening the association by adjustment of the pH or addition of metal ions could evidently reduce the photoluminescence in the micellar state. Very interestingly, among many metal cations, only Pd2+, which can chelate strongly with theophylline, strongly quenched the photoluminescence from the micelles. Therefore, the polymer micelles functioned as an optical sensor for Pd(ii) ion not only by spectroscopy but also with the naked eye.

Precise Synthesis and Thermoresponsive Property of Poly(ethyl glycidyl ether) and Its Block and Statistic Copolymers with Poly(glycidol)

In this paper, we describe a comprehensive study of the thermoresponsive properties of statistic copolymers and multiblock copolymers synthesized by poly(glycidol)s (PG) and poly(ethyl glycidyl ether) (PEGE) with different copolymerization methods. These copolymers were first synthesized by ring-opening polymerization (ROP), which was initiated by tert-butylbenzyl alcohol (tBBA) and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris(dimethylamino)phosphoranylidenamino]-2Λ⁵,4Λ⁵-catenadi(phosphazene) (t-Bu-P₄) as the catalyst, and then the inherent protective groups were removed to obtain the copolymers without any specific chain end groups. The thermoresponsive property of the statistic copolymer PG_x-stat-PEGE_y was compared with the diblock copolymer PG_x-b-PEGE_y, and the triblock copolymers were compared with the pentablock copolymers. Among them, PG-stat-PEGE, PG-b-PEGE-b-PG-b-PEGE-b-PG, and PEGE-b-PG-b-PEGE-b-PG-b-PEGE, and even the specific ratio of PEGE-b-PG-b-PEGE, exhibited LCST-type phase transitions in water, which were characterized by cloud point (T_cp). Although the ratio of x to y affected the value of the T_cp of PG_x-stat-PEGE_y, we found that the disorder of the copolymer has a decisive effect on the phase-transition behavior. The phase-transition behaviors of PG-b-PEGE, part of PEGE-b-PG-b-PEGE, and PG-b-PEGE-b-PG copolymers in water present a two-stage phase transition, that is, firstly LCST-type and then the upper critical solution temperature (UCST)-like phase transition. In addition, we have extended the research on the thermoresponsive properties of EGE homopolymers without specific α-chain ends.

Insulin-induced conformational transition of fluorescent copolymers: a perspective of self-assembly between protein and micellar solutions of smart copolymers

Synthesizing and understanding phase transition behavior of novel block copolymers is very crucial for fabricating next generation of smart materials with foreseeable applications. In this regard, we synthesized three random (r) copolymers of poly(N-vinyl-caprolactam) (PVCL) and poly(2-dimethyl amino ethyl methacrylate) (PDMAEMA) with varying percentages of each block and characterized them using nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) patterns, time-resolved fluorescence spectroscopy, and atomic force microscopy (AFM). Synthesized copolymers i.e. PVCL₃₀-PDMAEMA₇₀, PVCL₅₀-PDMAEMA₅₀ and PVCL₇₀-PDMAEMA₃₀ have fluorescence properties, which were confirmed by time-resolved fluorescence spectra and emission spectra, and emission bands were observed at ∼310, ∼435 and ∼424 nm, respectively. The fluorescence lifetime for PVCL₅₀-PDMAEMA₅₀ is larger than those of the other two copolymers suggesting a slow decay of the excited state. The copolymers have spherical geometry as micelles, which were confirmed by TEM. We observed patterned arrangement of micelles and the arranged micelles appear to be pentagon in shape, creating space in between the arranged micelles; however, for PVCL₅₀-PDMAEMA₅₀, the arranged micelles do not form any particular shape. The thermal phase transition of PVCL-r-PDMAEMA in aqueous solution was studied by differential scanning calorimetry and thermal fluorescence spectroscopy. In order to design a biomimetic polymer for bio-specific applications and to understand novel concepts towards polymer-protein interactions, we studied the effect of insulin on lower critical solution temperature (LCST) of PVCL-r-PDMAEMA using multiple sophisticated techniques. The LCST is finely tuned by incorporation of two blocks with various block compositions and the value falls within the range of human body temperature, making PVCL₅₀-PDMAEMA₅₀ a highly compatible material for bio-medical and bio-material applications. Insulin forms a self-assembly with the monomers of PVCL-r-PDMAEMA, which leads to enhancing the micellar aggregates and the eventual decrease in the LCST of the diblock copolymer aqueous solution. The present study provides new insights into insulin-copolymer interactions and can be used for self-assembling nanocarriers and designing protein resistance surfaces.

Poly( N-isopropylacrylamide)-Based Polymer-Inducing Isothermal Hydrophilic-to-Hydrophobic Phase Transition via Detachment of Hydrophilic Acid-Labile Moiety

The polymerization of N-isopropylacrylamide (NIPAAm) with ionizable monomers results in pH-responsive lower critical solution temperature (LCST) polymer which works in an ionization-dependent manner. However, gradual ionization of the comonomer occurs at a broad pH range due to the electrostatic field generated by the polymers, limiting the extent of LCST shift in response to pH change. Furthermore, excess introduction of comonomer may dull phase transition behavior. Here, we report the development of an ionization-independent LCST polymer that exerts a sharp isothermal hydrophilic-to-hydrophobic phase transition in response to slight pH change. Our polymer has a poly(NIPAAm/2-aminoisoprpylacrylamide (AIPAAm)) (P(NIPAAm/AIPAAm)) backbone that retains the continuous structural similarity of N-alkyl groups for preserving phase transition sensitivity, and primary amine for forming hydrophilic acid-labile 2-propionic-3-methylmaleic (PMM) amide linkage. The PMM moiety improves the polymer's hydrophilicity and drastically increases the LCST. Detachment of the PMM moiety in response to mild acidic condition (pH < 6.8) lowers the LCST to that of original P(NIPAAm/AIPAAm), permitting isothermal pH-responsive phase transition. Utilizing this mechanism, P(NIPAAm/AIPAAm) modified with PMM amide linkage exhibits a sharp hydrophilic-to-hydrophobic transition at a physiological temperature (37 °C) and, strikingly, facilitates interaction with cultured cells. Most importantly, our polymer showed significantly higher accumulation within a solid tumor after systemic injection compared to conventional PNIPAAm, which may be due to its phase transition responding to slightly acidic tumor microenvironment. Thus, this study provides a novel polymer that offers delicate control of LCST and pH-responsiveness suitable for use in even fuzzy biological environments.

The emulsion polymerization induced self-assembly of a thermoresponsive polymer poly(N-vinylcaprolactam)

A thermoresponsive polymer, poly(N-vinylcaprolactam) (PNVCL), was synthesized in an emulsion above its thermal transition temperature to produce particles via polymerization induced self-assembly (PISA).

Effect of chain architecture on the swelling and thermal response of star-shaped thermo-responsive (poly(methoxy diethylene glycol acrylate)-block-polystyrene)3 block copolymer films

The effect of chain architecture on the swelling and thermal response of thin films obtained from an amphiphilic three-arm star-shaped thermo-responsive block copolymer poly(methoxy diethylene glycol acrylate)-block-polystyrene ((PMDEGA-b-PS)₃) is investigated by in situ neutron reflectivity (NR) measurements. The PMDEGA and PS blocks are micro-phase separated with randomly distributed PS nanodomains. The (PMDEGA-b-PS)₃ films show a transition temperature (TT) at 33 °C in white light interferometry. The swelling capability of the (PMDEGA-b-PS)₃ films in a D₂O vapor atmosphere is better than that of films from linear PS-b-PMDEGA-b-PS triblock copolymers, which can be attributed to the hydrophilic end groups and limited size of the PS blocks in (PMDEGA-b-PS)₃. However, the swelling kinetics of the as-prepared (PMDEGA-b-PS)₃ films and the response of the swollen film to a temperature change above the TT are significantly slower than that in the PS-b-PMDEGA-b-PS films, which may be related to the conformation restriction by the star-shape. Unlike in the PS-b-PMDEGA-b-PS films, the amount of residual D₂O in the collapsed (PMDEGA-b-PS)₃ films depends on the final temperature. It decreases from (9.7 ± 0.3)% to (7.0 ± 0.3)% or (6.0 ± 0.3)% when the final temperatures are set to 35 °C, 45 °C and 50 °C, respectively. This temperature-dependent reduction of embedded D₂O originates from the hindrance of chain conformation from the star-shaped chain architecture.

Double thermoresponsive pentablock copolymers: synthesis by one-pot RAFT polymerization and self-assembly in aqueous solutions

Pentablock copolymers synthesized by one-pot successive RAFT polymerization are double thermoresponsive and exhibit block sequence dependent aggregation in aqueous solutions.

Exploration of Doubly Thermal Phase Transition Process of PDEGA-b-PDMA-b-PVCL in Water

Understanding of phase transition mechanism of thermoresponsive polymers is the basis for the rational design of smart materials with predictable properties. Linear ABC triblock terpolymer poly(di(ethylene glycol)ethyl ether acrylate)-b-poly(N,N-dimethylacrylamide)-b-poly(N-vinylcaprolactam) (PDEGA-b-PDMA-b-PVCL) was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. The doubly thermal phase transition of PDEGA-b-PDMA-b-PVCL in aqueous solution was investigated by a combination of nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), turbidimetry, and dynamic light scattering (DLS). The terpolymer self-assembles into micelles with PDEGA being the core-forming block during the first lower critical solution temperature (LCST) transition corresponding to PDEGA, which is followed by a second LCST transition corresponding to PVCL, resulting in the formation of micellar aggregates. The PDMA middle segment plays an important role as an isolation zone to prevent cooperative dehydration of the PDEGA and PVCL segments, and therefore, two independent LCST transitions corresponding to PDEGA and PVCL were observed. Furthermore, FT-IR with perturbation correlation moving window (PCMW) and two-dimensional spectroscopy (2DCOS) was applied to elucidate the two-step phase transition mechanism of this terpolymer. It was observed that the CH, ester carbonyl, and ether groups of PDEGA change prior to the CH and amide carbonyl groups of PVCL, further supporting that the two phase transitions corresponding to PDEGA and PVCL indeed occur without mutual interferences.

Role of Side-Chain Molecular Features in Tuning Lower Critical Solution Temperatures (LCSTs) of Oligoethylene Glycol Modified Polypeptides

A series of thermoresponsive polypeptides has been synthesized using a methodology that allowed facile adjustment of side-chain functional groups. The lower critical solution temperature (LCST) properties of these polymers in water were then evaluated relative to systematic molecular modifications in their side-chains. It was found that in addition to the number of ethylene glycol repeats in the side-chains, terminal and linker groups also have substantial and predictable effects on cloud point temperatures (Tcp). In particular, we found that the structure of these polypeptides allowed for inclusion of polar hydroxyl groups, which significantly increased their hydrophilicity and decreased the need to use long oligoethylene glycol repeats to obtain LCSTs. The thioether linkages in these polypeptides were found to provide an additional structural feature for reversible switching of both polypeptide conformation and thermoresponsive properties.

Comparison of LCST-transitions of homopolymer mixture, diblock and statistical copolymers of NIPAM and VCL in water

The LCST-transitions of linear, well-defined polymers of N-isopropylacrylamide (NIPAM) and N-vinylcaprolactam (VCL), including a homopolymer mixture, diblock and statistical copolymers, in water are explored and compared by applying turbidity and FTIR measurements in combination with two-dimensional correlation spectroscopy (2Dcos). Only one transition is observed in all polymer systems, suggesting a dependent aggregation of poly(N-isopropylacrylamide) (PNIPAM) and poly(N-vinylcaprolactam) (PVCL) parts in the phase transition processes. With the help of 2Dcos analysis, it is discovered that the hydrophobic interaction among C-H groups is the driving force for simultaneous collapse of the two distinct thermo-responsive segments. Additionally, the delicate differences within the LCST-transitions thereof have been emphasized, where the phase separation temperatures of the homopolymer mixture and the diblock copolymer are close while that of the statistical copolymer is relatively higher. Moreover, both diblock and statistical copolymers exhibit rather sharp phase transitions while the homopolymer mixture demonstrates a moderately continuous one.