Structural Evolution in Microbial Polyesters

Using an aromatic amide as nucleating agent to enhance the crystallization and dimensional stability of poly(3-hydroxybutyrate-co-3-hydroxyhexanate)

Biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) has emerged as a promising biodegradable polymer with a great potential to compete with traditional petroleum-based plastics, however, the poor crystallization ability makes it challenge to transform into high-performance products via common melt-processing methods. Herein, we demonstrate that N,N'-dicyclohexyl-2,6-naphthalenedicarboxamide (TMB) can serve as an efficient nucleating agent to significantly enhance the crystallization and resulting storage stability of PHBHHx. The results indicate that PHBHHx with small amounts of TMB (0.3-0.5 wt%) can crystallize completely even under a rapid cooling rate of 100 °C/min and the isothermal crystallization time is greatly reduced. As a result, the crystallinity of the injection-molded PHBHHx products is increased from 24.5 % to 39.5 %, without secondary crystallization after being stored at room temperature for 6 h. The products exhibit superior dimensional stability and the post-shrinkage can be decreased to as low as 0.1 %. Our work offers a feasible method to develop high-performance PHBHHx materials with remarkably enhanced crystallization ability.

Plasticization of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with an Oligomeric Polyester: Miscibility and Effect of the Microstructure and Plasticizer Distribution on Thermal and Mechanical Properties

In the last few decades, many efforts have been made to make poly(3-hydroxybutyrate) (PHB) and its copolymers more suitable for industrial production and large-scale use. Plasticization, especially using biodegradable oligomeric plasticizers, has been one of the strategies for this purpose. However, PHB and its copolymers generally present low miscibility with plasticizers. An understanding of the plasticizer distribution between the mobile and rigid amorphous phases and how this influences thermal, mechanical, and morphological properties remains a challenge. Herein, formulations of poly(hydroxybutyrate-co-valerate) (PHBV) plasticized with an oligomeric polyester based on lactic acid, adipic acid, and 1,2-propanediol (PLAP) were prepared by melt extrusion. The effects of the PLAP content on the processability, miscibility, and microstructure of the semicrystalline PHBV and on the thermal, morphological, and mechanical properties of the formulations were investigated. The compositions of the mobile and rigid amorphous phases of the PHBV/PLAP formulations were easily estimated by combining dynamic mechanical data and the Fox equation, which showed a heterogeneous distribution of PLAP in these two phases. An increase in the PLAP mass fraction in the formulations led to progressive changes in the composition of the amorphous phases, an increase of both crystalline lamellae and interlamellar layer thickness, and a decrease in the melting and glass transition temperatures as well as the PHBV stiffness. The Flory-Huggins interaction parameter varied with the formulation composition in the range of -0.299 to -0.081. The critical PLAP mass fraction of 0.37 obtained from thermodynamic data is close to the value estimated from dynamic mechanical analysis (DMA) data and the Fox equation. The mechanical properties showed a close relationship with the distribution of PLAP in the rigid and mobile amorphous phases as well as with the microstructure of the crystalline phase of PHBV in the formulations.

Crystallization Kinetics and Multiple Melting Behavior of Biodegradable Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

The crystallization and melting behavior of biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] with 11 % 4HB content was investigated by differential scanning calorimetry (DSC), small and wide angle X-ray scattering (SAXS and WAXS). The Avrami analysis was performed to obtain the kinetic parameters of crystallization. The results showed that the Avrami equation was suitable for describing the isothermal and nonisothermal crystallization processes of P(3HB-co-4HB). Based on the values of the equilibrium melting temperature and the half-time of crystallization, its nucleation constant of crystal growth kinetics was obtained by using the Lauritzen-Hoffman model, which was found to be 1.92 × 105 K2, lower than that for pure PHB. During the subsequent heating process, quite different multiple melting behaviors were observed for P(3HB-co-4HB) crystallized isothermally or nonisothermally. The origins of the multiple melting behaviors were discussed based on either the presence of dual lamellar thicknesses or the melt-recrystallization mechanism. In general, the crystallization and melting behaviors were elucidated by this work.

Probing the self-assembled nanostructures of functional polymers with synchrotron grazing incidence X-ray scattering

For advanced functional polymers such as biopolymers, biomimic polymers, brush polymers, star polymers, dendritic polymers, and block copolymers, information about their surface structures, morphologies, and atomic structures is essential for understanding their properties and investigating their potential applications. Grazing incidence X-ray scattering (GIXS) is established for the last 15 years as the most powerful, versatile, and nondestructive tool for determining these structural details when performed with the aid of an advanced third-generation synchrotron radiation source with high flux, high energy resolution, energy tunability, and small beam size. One particular merit of this technique is that GIXS data can be obtained facilely for material specimens of any size, type, or shape. However, GIXS data analysis requires an understanding of GIXS theory and of refraction and reflection effects, and for any given material specimen, the best methods for extracting the form factor and the structure factor from the data need to be established. GIXS theory is reviewed here from the perspective of practical GIXS measurements and quantitative data analysis. In addition, schemes are discussed for the detailed analysis of GIXS data for the various self-assembled nanostructures of functional homopolymers, brush, star, and dendritic polymers, and block copolymers. Moreover, enhancements to the GIXS technique are discussed that can significantly improve its structure analysis by using the new synchrotron radiation sources such as third-generation X-ray sources with picosecond pulses and partial coherence and fourth-generation X-ray laser sources with femtosecond pulses and full coherence.

Unusual hierarchical distribution of β-crystals and improved mechanical properties of injection-molded bars of isotactic polypropylene

Shish-kebab and β-cylindrite morphology were observed simultaneously in the GAIM iPP part, which showed greatly improved mechanical properties.

pH-dependent structures of ferritin and apoferritin in solution: disassembly and reassembly

The pH-dependent structures of the ferritin shell (apoferritin, 24-mer) and the ferrihydrite core, under physiological conditions that permit enzymatic activity, were investigated by synchrotron small-angle X-ray scattering (SAXS). The solution structure of apoferritin was found to be nearly identical to the crystal structure. The shell thickness and hollow core volumes were estimated. The intact hollow spherical apoferritin was stable over a wide pH range, 3.40-10.0, and the ferrihydrite core was stable over the pH range 2.10-10.0. The apoferritin subunits underwent aggregation below pH 0.80, whereas the ferrihydrite cores aggregated below pH 2.10 as a result of the disassembly of the ferritin shell under the strongly acidic conditions. As the pH decreased from 3.40 to 0.80, apoferritin underwent stepwise disassembly by first forming a hollow sphere with two holes, then a headset-shaped structure, and, finally, rodlike oligomers. As the pH was increased from pH 1.96, the disassembled rodlike oligomers recovered only to the headset-shaped structure, and the disassembled headset-shaped intermediates recovered only to the hollow spherical structure with two hole defects. The apoferritin hole defects that formed during the disassembly process did not heal as the pH was increased to neutral or slightly basic conditions. The pH-induced apoferritin disassembly and reassembly processes were not fully reversible, although they were pseudoreversible over a limited pH range, between 10.0 and 2.66.

Microbial production of polyhydroxyalkanoate block copolymer by recombinant Pseudomonas putida

Polyhydroxyalkanoate (PHA) synthesis genes phaPCJ(Ac) cloned from Aeromonas caviae were transformed into Pseudomonas putida KTOY06ΔC, a mutant of P. putida KT2442, resulting in the ability of the recombinant P. putida KTOY06ΔC (phaPCJ(A.c)) to produce a short-chain-length and medium-chain-length PHA block copolymer consisting of poly-3-hydroxybutyrate (PHB) as one block and random copolymer of 3-hydroxyvalerate (3HV) and 3-hydroxyheptanoate (3HHp) as another block. The novel block polymer was studied by differential scanning calorimetry (DSC), nuclear magnetic resonance, and rheology measurements. DSC studies showed the polymer to possess two glass transition temperatures (T(g)), one melting temperature (T(m)) and one cool crystallization temperature (T(c)). Rheology studies clearly indicated a polymer chain re-arrangement in the copolymer; these studies confirmed the polymer to be a block copolymer, with over 70 mol% homopolymer (PHB) of 3-hydroxybutyrate (3HB) as one block and around 30 mol% random copolymers of 3HV and 3HHp as the second block. The block copolymer was shown to have the highest tensile strength and Young's modulus compared with a random copolymer with similar ratio and a blend of homopolymers PHB and PHVHHp with similar ratio. Compared with other commercially available PHA including PHB, PHBV, PHBHHx, and P3HB4HB, the short-chain- and medium-chain-length block copolymer PHB-b-PHVHHp showed differences in terms of mechanical properties and should draw more attentions from the PHA research community.

Effect of C(60) fullerene on the duplex formation of i-motif DNA with complementary DNA in solution

The structural effects of fullerene on i-motif DNA were investigated by characterizing the structures of fullerene-free and fullerene-bound i-motif DNA, in the presence of cDNA and in solutions of varying pH, using circular dichroism and synchrotron small-angle X-ray scattering. To facilitate a direct structural comparison between the i-motif and duplex structures in response to pH stimulus, we developed atomic scale structural models for the duplex and i-motif DNA structures, and for the C(60)/i-motif DNA hybrid associated with the cDNA strand, assuming that the DNA strands are present in an ideal right-handed helical conformation. We found that fullerene shifted the pH-induced conformational transition between the i-motif and the duplex structure, possibly due to the hydrophobic interactions between the terminal fullerenes and between the terminal fullerenes and an internal TAA loop in the DNA strand. The hybrid structure showed a dramatic reduction in cyclic hysteresis.

pH-dependent structures of an i-motif DNA in solution

We have investigated for the first time the structure of i-motif DNA in solution at various pH conditions by using synchrotron small-angle X-ray scattering technique. To facilitate direct structural comparison between solution structures of i-motif DNA at various pH values, we created atomic coordinates of i-motif DNA from a fully folded to unfolded atomic model. Under mild acidic conditions, the conformations for i-motif DNA appeared to be similar to that of the partially unfolded i-motif atomic model in overall shape, rather than the fully folded i-motif atomic model. Collectively, our observations indicate that i-motif DNA molecule is structurally dynamic over a wide pH range, adopting multiple conformations ranging from the folded i-motif structure to a random coil conformation. As the i-motif structure has been used as an important component in nanomachines, we can therefore believe that the structural evidence presented herein will promote the development of future DNA-based molecular-actuator devices.