Fibronectin adsorption on tantalum: the influence of nanoroughness

Plasma polymerized bio-interface directs fibronectin adsorption and functionalization to enhance "epithelial barrier structure" formation via FN-ITG β1-FAK-mTOR signaling cascade

BACKGROUND

Transepithelial medical devices are increasing utilized in clinical practices. However, the damage of continuous natural epithelial barrier has become a major risk factor for the failure of epithelium-penetrating implants. How to increase the "epithelial barrier structures" (focal adhesions, hemidesmosomes, etc.) becomes one key research aim in overcoming this difficulty. Directly targeting the in situ "epithelial barrier structures" related proteins (such as fibronectin) absorption and functionalization can be a promising way to enhance interface-epithelial integration.

METHODS

Herein, we fabricated three plasma polymerized bio-interfaces possessing controllable surface chemistry. Their capacity to adsorb and functionalize fibronectin (FN) from serum protein was compared by Liquid Chromatography-Tandem Mass Spectrometry. The underlying mechanisms were revealed by molecular dynamics simulation. The response of gingival epithelial cells regarding the formation of epithelial barrier structures was tested.

RESULTS

Plasma polymerized surfaces successfully directed distinguished protein adsorption profiles from serum protein pool, in which plasma polymerized allylamine (ppAA) surface favored adsorbing adhesion related proteins and could promote FN absorption and functionalization via electrostatic interactions and hydrogen bonds, thus subsequently activating the ITG β1-FAK-mTOR signaling and promoting gingival epithelial cells adhesion.

CONCLUSION

This study offers an effective perspective to overcome the current dilemma of the inferior interface-epithelial integration by in situ protein absorption and functionalization, which may advance the development of functional transepithelial biointerfaces. Tuning the surface chemistry by plasma polymerization can control the adsorption of fibronectin and functionalize it by exposing functional protein domains. The functionalized fibronectin can bind to human gingival epithelial cell membrane integrins to activate epithelial barrier structure related signaling pathway, which eventually enhances the formation of epithelial barrier structure.

Investigation of SARS-CoV-2 nucleocapsid protein interaction with a specific antibody by combined spectroscopic ellipsometry and quartz crystal microbalance with dissipation

Detailed evaluations of the antigen and antibody interaction rate and strength of the immune complex formed are very important for medical and bioanalytical applications. These data are crucial for the development of sensitive and fast immunosensors suitable for continuous measurements. Therefore, combined spectroscopic ellipsometry (SE) and quartz crystal microbalance with dissipation (QCM-D) technique (SE/QCM-D) was used for the evaluation: (i) of covalent immobilization of SARS-CoV-2 nucleocapsid protein (SCoV2-N) on QCM-D sensor disc modified by self-assembled monolayer based on 11-mercaptoundecanoic acid and (ii) interaction of immobilized SCoV2-N with specific polyclonal anti-SCoV2-N antibodies followed by immune complex formation process. The results show that the SCoV2-N monolayer is rigid due to the low energy dissipation registered during the QCM-D measurement. In contrast, the anti-SCoV2-N layer produced after interaction with the immobilized SCoV2-N formed a soft and viscous layer. It was determined, that the sparse distribution of SCoV2-N on the surface affected the spatial arrangement of the antibody during the formation of immune complexes. The hinge-mediated flexibility of the antibody Fab fragments allows them to reach the more distantly located SCoV2-N and establish a bivalent binding between proteins in the formed SCoV2-N/anti-SCoV2-N complex. It was noted that the SE/QCM-D method can provide more precise quantitative information about the flexibility and conformational changes of antibody during the formation of the immune complex on the surface over time.

Adsorption behavior of serum proteins on anodized titanium is driven by surface nanomorphology

Protein adsorption behavior can play a critical role in defining the outcome of a material by affecting the subsequent in vivo response to it. To date, the effect of surface properties on protein adsorption behavior has been mainly focused on surface chemistry, but research on the effect of nanoscale surface topography remains limited. In this study, the adsorption behavior of human serum albumin, immunoglobulin G, and fibrinogen in terms of the adsorbed amount and conformational changes were investigated on bare and anodized titanium (Ti) samples (40 and 60 V applied voltages). While the surface chemistry, RMS surface roughness, and arithmetic surface roughness of the anodized samples were similar, they had distinctly different nanomorphologies identified by atomic force microscopy and scanning electron microscopy, and the surface statistical parameters, surface skewness Ssk and kurtosis Sku. The Feret pore size distribution was more uniform on the 60 V sample, and surface nanostructures were more symmetrical with higher peaks and deeper pores. On the other hand, the 40 V sample surface presented a nonuniform pore size distribution and asymmetrical surface nanostructures with lower peaks and shallower pores. The amount of surface-adsorbed protein increased on the sample surfaces in the order of Ti < 40 V < 60 V with the predominant factor affecting the amount of surface-adsorbed protein being the increased surface area attained by pore formation. The secondary structure of all adsorbed proteins deviated from that of their native counterparts. While comparing the secondary structure components of proteins on anodized surfaces, it was observed that all three proteins retained more of their secondary structure composition on the surface with more uniform and symmetrical nanofeatures than the surface having asymmetrical nanostructures. Our results suggest that the nanomorphology of the peaks and outer walls of the nanotubes can significantly influence the conformation of adsorbed serum proteins, even for surfaces having similar roughness values.

Cluster-Assembled Nanoporous Super-Hydrophilic Smart Surfaces for On-Target Capturing and Processing of Biological Samples for Multi-Dimensional MALDI-MS

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) on cluster-assembled super-hydrophilic nanoporous titania films deposited on hydrophobic conductive-polymer substrates feature a unique combination of surface properties that significantly improve the possibilities of capturing and processing biological samples before and during the MALDI-MS analysis without changing the selected sample target (multi-dimensional MALDI-MS). In contrast to pure hydrophobic surfaces, such films promote a remarkable biologically active film porosity at the nanoscale due to the soft assembling of ultrafine atomic clusters. This unique combination of nanoscale porosity and super-hydrophilicity provides room for effective sample capturing, while the hydrophilic-hydrophobic discontinuity at the border of the dot-patterned film acts as a wettability-driven containment for sample/reagent droplets. In the present work, we evaluate the performance of such advanced surface engineered reactive containments for their benefit in protein sample processing and characterization. We shortly discuss the advantages resulting from the introduction of the described chips in the MALDI-MS workflow in the healthcare/clinical context and in MALDI-MS bioimaging (MALDI-MSI).

Oxygen Ion Implantation Improving Cell Adhesion on Titanium Surfaces through Increased Attraction of Fibronectin PHSRN Domain

Mechanistic understanding of fibronectin (FN) adsorption which determines cell adhesion on cell-implant interfaces is significant for improving the osteoconduction and soft-tissue healing of implants. Here, it is shown that the adsorption behavior of FN on the titanium oxide surface (TiO₂ ) is highly relative to its Pro-His-Ser-Arg-Asn (PHSRN) peptide. FN lacking PHSRN fails to bind to surfaces, resulting in inhibited cell adhesion and spreading. Molecular dynamics simulation shows higher affinity and greater adsorption energy of PHSRN peptide with TiO₂ surface due to the stronger hydrogen bonds formed by the serine and arginine residues with O ion of the substrate. Finally, by increasing O content in TiO₂ surfaces through O ion-beam implantation, improving the cell adhesion, cell differentiation, and the subsequent biomineralization on titanium implant is realized. This study reveals the vital role of PHSRN in FN-mediated cell adhesion on implant surfaces, providing a promising new target for further tissue integration and implant success.

The competing influence of surface roughness, hydrophobicity, and electrostatics on protein dynamics on a self-assembled monolayer

Surface morphology, in addition to hydrophobic and electrostatic effects, can alter how proteins interact with solid surfaces. Understanding the heterogeneous dynamics of protein adsorption on surfaces with varying roughness is experimentally challenging. In this work, we use single-molecule fluorescence microscopy to study the adsorption of α-lactalbumin protein on the glass substrate covered with a self-assembled monolayer (SAM) with varying surface concentrations. Two distinct interaction mechanisms are observed: localized adsorption/desorption and continuous-time random walk (CTRW). We investigate the origin of these two populations by simultaneous single-molecule imaging of substrates with both bare glass and SAM-covered regions. SAM-covered areas of substrates are found to promote CTRW, whereas glass surfaces promote localized motion. Contact angle measurements and atomic force microscopy imaging show that increasing SAM concentration results in both increasing hydrophobicity and surface roughness. These properties lead to two opposing effects: increasing hydrophobicity promotes longer protein flights, but increasing surface roughness suppresses protein dynamics resulting in shorter residence times. Our studies suggest that controlling hydrophobicity and roughness, in addition to electrostatics, as independent parameters could provide a means to tune desirable or undesirable protein interactions with surfaces.

Ion Beam Nanopatterning of Biomaterial Surfaces

Ion beam irradiation of solid surfaces may result in the self-organized formation of well-defined topographic nanopatterns. Depending on the irradiation conditions and the material properties, isotropic or anisotropic patterns of differently shaped features may be obtained. Most intriguingly, the periodicities of these patterns can be adjusted in the range between less than twenty and several hundred nanometers, which covers the dimensions of many cellular and extracellular features. However, even though ion beam nanopatterning has been studied for several decades and is nowadays widely employed in the fabrication of functional surfaces, it has found its way into the biomaterials field only recently. This review provides a brief overview of the basics of ion beam nanopatterning, emphasizes aspects of particular relevance for biomaterials applications, and summarizes a number of recent studies that investigated the effects of such nanopatterned surfaces on the adsorption of biomolecules and the response of adhering cells. Finally, promising future directions and potential translational challenges are identified.

Nanoscale Surface Topography Modulates hIAPP Aggregation Pathways at Solid-Liquid Interfaces

The effects that solid–liquid interfaces exert on the aggregation of proteins and peptides are of high relevance for various fields of basic and applied research, ranging from molecular biology and biomedicine to nanotechnology. While the influence of surface chemistry has received a lot of attention in this context, the role of surface topography has mostly been neglected so far. In this work, therefore, we investigate the aggregation of the type 2 diabetes-associated peptide hormone hIAPP in contact with flat and nanopatterned silicon oxide surfaces. The nanopatterned surfaces are produced by ion beam irradiation, resulting in well-defined anisotropic ripple patterns with heights and periodicities of about 1.5 and 30 nm, respectively. Using time-lapse atomic force microscopy, the morphology of the hIAPP aggregates is characterized quantitatively. Aggregation results in both amorphous aggregates and amyloid fibrils, with the presence of the nanopatterns leading to retarded fibrillization and stronger amorphous aggregation. This is attributed to structural differences in the amorphous aggregates formed at the nanopatterned surface, which result in a lower propensity for nucleating amyloid fibrillization. Our results demonstrate that nanoscale surface topography may modulate peptide and protein aggregation pathways in complex and intricate ways.

Fibrinogen, collagen, and transferrin adsorption to poly(3,4-ethylenedioxythiophene)-xylorhamno-uronic glycan composite conducting polymer biomaterials for wound healing applications

We present the conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT) doped with an algal-derived glycan extract, Phycotrix™ [xylorhamno-uronic glycan (XRU84)], as an innovative electrically conductive material capable of providing beneficial biological and electrical cues for the promotion of favorable wound healing processes. Increased loading of the algal XRU84 into PEDOT resulted in a reduced surface nanoroughness and interfacial surface area and an increased static water contact angle. PEDOT-XRU84 films demonstrated good electrical stability and charge storage capacity and a reduced impedance relative to the control gold electrode. A quartz crystal microbalance with dissipation monitoring study of protein adsorption (transferrin, fibrinogen, and collagen) showed that collagen adsorption increased significantly with increased XRU84 loading, while transferrin adsorption was significantly reduced. The viscoelastic properties of adsorbed protein, characterized using the ΔD/Δf ratio, showed that for transferrin and fibrinogen, a rigid, dehydrated layer was formed at low XRU84 loadings. Cell studies using human dermal fibroblasts demonstrated excellent cell viability, with fluorescent staining of the cell cytoskeleton illustrating all polymers to present excellent cell adhesion and spreading after 24 h.

Protein Adsorption at Nanorough Titanium Oxide Surfaces: The Importance of Surface Statistical Parameters beyond Surface Roughness

The nanoscale surface topography of biomaterials can have strong effects on protein adsorption. While there are numerous surface statistical parameters for the characterization of nanorough surfaces, none of them alone provides a complete description of surface morphology. Herein, a selection of nanorough titanium oxide surfaces has been fabricated with root-mean-square roughness (Sq) values below 2.7 nm but very different surface morphologies. The adsorption of the proteins myoglobin (MGB), bovine serum albumin (BSA), and thyroglobulin (TGL) at these surfaces was investigated in situ by ellipsometry to assess the importance of six of the most common surface statistical parameters. For BSA adsorption, both protein film thickness and time constant of adsorption were found to scale linearly with Sq s. For TGL, however, the same adsorption characteristics depend linearly on the surface skewness (Ssk), which we attribute to the rather extreme size of this protein. Finally, a mixed behavior is observed for MGB adsorption, showing different linear correlations with Sq and Ssk. These results demonstrate the importance of a thorough morphological characterization of the surfaces employed in protein adsorption and possibly also cell adhesion studies.

Fibronectin adsorption on oxygen plasma-treated polyurethane surfaces modulates endothelial cell response

Fibronectin coating increases implant biocompatibility by enhancing surface endothelialization via integrin-mediated binding.

Biological responses to physicochemical properties of biomaterial surface

Biomedical scientists use chemistry-driven processes found in nature as an inspiration to design biomaterials as promising diagnostic tools, therapeutic solutions, or tissue substitutes. While substantial consideration is devoted to the design and validation of biomaterials, the nature of their interactions with the surrounding biological microenvironment is commonly neglected. This gap of knowledge could be owing to our poor understanding of biochemical signaling pathways, lack of reliable techniques for designing biomaterials with optimal physicochemical properties, and/or poor stability of biomaterial properties after implantation. The success of host responses to biomaterials, known as biocompatibility, depends on chemical principles as the root of both cell signaling pathways in the body and how the biomaterial surface is designed. Most of the current review papers have discussed chemical engineering and biological principles of designing biomaterials as separate topics, which has resulted in neglecting the main role of chemistry in this field. In this review, we discuss biocompatibility in the context of chemistry, what it is and how to assess it, while describing contributions from both biochemical cues and biomaterials as well as the means of harmonizing them. We address both biochemical signal-transduction pathways and engineering principles of designing a biomaterial with an emphasis on its surface physicochemistry. As we aim to show the role of chemistry in the crosstalk between the surface physicochemical properties and body responses, we concisely highlight the main biochemical signal-transduction pathways involved in the biocompatibility complex. Finally, we discuss the progress and challenges associated with the current strategies used for improving the chemical and physical interactions between cells and biomaterial surface.

Effect of TiO2 addition on adhesion and biological behavior of BCP-TiO2 composite films deposited by magnetron sputtering

The present investigation focuses on the deposition of biphasic calcium phosphate (BCP) and titania (TiO₂) composite films on Ti-6Al-4V substrates using radio frequency (RF) magnetron sputtering. Three different compositions such as 100% BCP, 25% TiO₂-75% BCP and 50% TiO₂-50% BCP films were fabricated, and the physical, mechanical and biological behaviors of the films were analyzed. Post deposition, the films were annealed at 700 °C for 2 h to induce the crystallinity and to study its effect on different properties. The wettability was found to be 95°(±3°) for 100% BCP, 73°(±2°) for 25% TiO₂-75% BCP and 35°(±1°) for 50% TiO₂-50% BCP films, indicating improvement in wettability with an increase of TiO₂ weight percent in the composite films. The value of critical load (L_c2) for 100 BCP film improved from 8.7 N to 14.8 N (25 TiO₂-BCP) and >19 N (50 TiO₂-BCP film), indicating improvement in bonding strength with TiO₂ addition. The fetal bovine serum (FBS) adsorption decreased from 7.11 ± 0.25 to 4.42 ± 0.17 μg/cm² with TiO₂ weight percent from 0 to 50%. Cell adhesion and proliferation significantly improved in 100% BCP, 25% TiO₂-75% BCP and 50% TiO₂-50% BCP films as compared to uncoated Ti-6Al-4V. The maximum cell proliferation was found on the surface of 50% TiO₂-50% BCP film (210.1 ± 6.5%) after 6 days of incubation. However, after annealing all the films exhibited less cell adhesion and cytocompatibility presumably due to change in composition. Globular apatite structure was observed on all modified surfaces after 7 days immersion in simulated body fluid (SBF); however, the growth rate was higher for 50 TiO₂-BCP films. All these results revealed that the addition of TiO₂ in BCP film (without annealing) is advantageous for improving the bonding strength as well as the bioactivity of implants, which can be used for long-term dental and orthopedic applications.

Domesticating the foreign body response: Recent advances and applications

The foreign body response is an immunological process that leads to the rejection of implanted devices and presents a fundamental challenge to their performance, durability, and therapeutic utility. Recent advances in materials development and device design are now providing strategies to overcome this immune-mediated reaction. Here, we briefly review our current mechanistic understanding of the foreign body response and highlight new anti-FBR technologies from this decade that have been applied successfully in biomedical applications relevant to implants, devices, and cell-based therapies. Further development of these important technologies promises to enable new therapies, diagnostics, and revolutionize the management of patient care for many intractable diseases.

Biomaterials: Foreign Bodies or Tuners for the Immune Response?

The perspectives of regenerative medicine are still severely hampered by the host response to biomaterial implantation, despite the robustness of technologies that hold the promise to recover the functionality of damaged organs and tissues. In this scenario, the cellular and molecular events that decide on implant success and tissue regeneration are played at the interface between the foreign body and the host inflammation, determined by innate and adaptive immune responses. To avoid adverse events, rather than the use of inert scaffolds, current state of the art points to the use of immunomodulatory biomaterials and their knowledge-based use to reduce neutrophil activation, and optimize M1 to M2 macrophage polarization, Th1 to Th2 lymphocyte switch, and Treg induction. Despite the fact that the field is still evolving and much remains to be accomplished, recent research breakthroughs have provided a broader insight on the correct choice of biomaterial physicochemical modifications to tune the reaction of the host immune system to implanted biomaterial and to favor integration and healing.

Adsorption of Proteins on Degradable Magnesium-Which Factors are Relevant?

Although the adsorption of proteins on the Mg surface was ascribed to be the main reason for the effect of proteins on magnesium (Mg) degradation, few studies about the adsorption of proteins on the Mg surface were performed due to the labile circumstances during immersion. In the present study, the adsorption of bovine serum albumin (BSA) and fibrinogen (Fib) on the Mg surface during and after immersion was extensively investigated in different media for the first time. The results revealed that BSA and Fib showed a similar adsorption trend on the Mg surface during and after immersion, and they adsorbed more on the Mg surface in Hank's balanced salt solution (HBSS) than in Dulbecco's modified Eagle medium Glutamax-I (DMEM). The possible influence factors for protein adsorption, such as pH, surface roughness, and wettability, were considered to elucidate different adsorption in HBSS and DMEM. It was found that the participation of Ca²⁺ in the formation of degradation products largely affected the degradation rate of Mg, changed surface roughness, compactness, and surface charge during immersion, which largely suppressed the adsorption of proteins on the Mg surface.

Quartz Crystal Microbalance With Dissipation Monitoring: A Powerful Method to Predict the in vivo Behavior of Bioengineered Surfaces

The Quartz Crystal Microbalance with dissipation monitoring (QCM-D) is a tool to measure mass and viscosity in processes occurring at or near surfaces, or within thin films. QCM-D is able to detect extremely small chemical, mechanical, and electrical changes taking place on the sensor surface and to convert them into electrical signals which can be investigated to study dynamic process. Surface nanotopography and chemical composition are of pivotal importance in biomedical applications since interactions of medical devices with the physiological environment are mediated by surface features. This review is intended to provide readers with an up-to-date summary of QCM-D applications in the study of cell behavior and to discuss the future trends for the use of QCM-D as a high-throughput method to study cell/surface interactions overcoming the current challenges in the design of biomedical devices.

Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants

Titanium (Ti) plays a predominant role as the material of choice in orthopaedic and dental implants. Despite the majority of Ti implants having long-term success, premature failure due to unsuccessful osseointegration leading to aseptic loosening is still too common. Recently, surface topography modification and biological/non-biological coatings have been integrated into orthopaedic/dental implants in order to mimic the surrounding biological environment as well as reduce the inflammation/infection that may occur. In this review, we summarize the impact of various Ti coatings on cell behaviour both in vivo and in vitro. First, we focus on the Ti surface properties and their effects on osteogenesis and then on bacterial adhesion and viability. We conclude from the current literature that surface modification of Ti implants can be generated that offer both osteoinductive and antimicrobial properties.

Lipid Layers on Nanoscale Surface Topography: Stability and Effect on Protein Adsorption

Herein, we report the coating of a surface with a random nanoscale topography with a lipid film formed by an anchoring stearic acid (SA) monolayer and phospholipid (DPPC) layers. For this purpose, different procedures were used for phospholipid coating, including adsorption from solution, drop deposition, and spin-coating. Our results reveal that the morphology of the obtained lipid films is strongly influenced by the topography of the underlying substrate but also impacted by other factors, including the coating procedure and surface wettability (modulated by the presence of SA). These coated surfaces showed a remarkable antifouling behavior toward proteins, with different yields of repellency (Y_rp) depending on the amount/organization of DPPC on the nanostructured substrate. The interaction between the proteins and phospholipids involves a partial detachement of the film. The use of characterization techniques with different charcateristics (accuracy, selectivity, analysis depth) did not reveal any obvious vertical heterogenity of the probed interface, indicating that the lipid film acts as a nonfouling coating on the whole surface, including the outermost part (nanoprotrusions) and deeper regions (valleys).

Protein-crystal interface mediates cell adhesion and proangiogenic secretion

The nanoscale materials properties of bone apatite crystals have been implicated in breast cancer bone metastasis and their interactions with extracellular matrix proteins are likely involved. In this study, we used geologic hydroxyapatite (HAP, Ca10(PO4)6(OH)2), closely related to bone apatite, to investigate how HAP surface chemistry and nano/microscale topography individually influence the crystal-protein interface, and how the altered protein deposition impacts subsequent breast cancer cell activities. We first utilized Förster resonance energy transfer (FRET) to assess the molecular conformation of fibronectin (Fn), a major extracellular matrix protein upregulated in cancer, when it adsorbed onto HAP facets. Our analysis reveals that both low surface charge density and nanoscale roughness of HAP facets individually contributed to molecular unfolding of Fn. We next quantified cell adhesion and secretion on Fn-coated HAP facets using MDA-MB-231 breast cancer cells. Our data show elevated proangiogenic and proinflammatory secretions associated with more unfolded Fn adsorbed onto nano-rough HAP facets with low surface charge density. These findings not only deconvolute the roles of crystal surface chemistry and topography in interfacial protein deposition but also enhance our knowledge of protein-mediated breast cancer cell interactions with apatite, which may be implicated in tumor growth and bone metastasis.

Nanoscale Surface Modifications of Orthopaedic Implants: State of the Art and Perspectives

Background:

Orthopaedic implants such as the total hip or total knee replacement are examples of surgical interventions with postoperative success rates of over 90% at 10 years. Implant failure is associated with wear particles and pain that requires surgical revision. Improving the implant - bone surface interface is a key area for biomaterial research for future clinical applications. Current implants utilise mechanical, chemical or physical methods for surface modification.

Methods:

A review of all literature concerning the nanoscale surface modification of orthopaedic implant technology was conducted.

Results:

The techniques and fabrication methods of nanoscale surface modifications are discussed in detail, including benefits and potential pitfalls. Future directions for nanoscale surface technology are explored.

Conclusion:

Future understanding of the role of mechanical cues and protein adsorption will enable greater flexibility in surface control. The aim of this review is to investigate and summarise the current concepts and future directions for controlling the implant nanosurface to improve interactions.

Adsorption of Human Plasma Albumin and Fibronectin onto Nanostructured Black Silicon Surfaces

The protein adsorption of two human plasma proteins-albumin (Alb) and fibronectin (Fn)-onto synthetic nanostructured bactericidal material-black silicon (bSi) surfaces (that contain an array of nanopillars) and silicon wafer (nonstructured) surfaces-was investigated. The adsorption behavior of Alb and Fn onto two types of substrata was studied using a combination of complementary analytical techniques. A two-step Alb adsorption mechanism onto the bSi surface has been proposed. At low bulk concentrations (below 40 μg/mL), the Alb preferentially adsorbed at the base of the nanopillars. At higher bulk concentrations, the Alb adsorbed on the top of the nanopillars. In the case of Fn, the protein preferentially adsorbed on the top of the nanopillars, irrespective of its bulk concentration.

The contribution of inflammasome components on macrophage response to surface nanotopography and chemistry

Implantable devices have become an established part of medical practice. However, often a negative inflammatory host response can impede the integration and functionality of the device. In this paper, we interrogate the role of surface nanotopography and chemistry on the potential molecular role of the inflammasome in controlling macrophage responses. To achieve this goal we engineered model substrata having precisely controlled nanotopography of predetermined height and tailored outermost surface chemistry. Bone marrow derived macrophages (BMDM) were harvested from genetically engineered mice deficient in the inflammasome components ASC, NLRP3 and AIM2. These cells were then cultured on these nanoengineered substrata and assessed for their capacity to attach and express pro-inflammatory cytokines. Our data provide evidence that the inflammasome components ASC, NLRP3 and AIM2 play a role in regulating macrophage adhesion and activation in response to surface nanotopography and chemistry. The findings of this paper are important for understanding the inflammatory consequences caused by biomaterials and pave the way to the rational design of future implantable devices having controlled and predictable inflammatory outcomes.

Planar and tubular patterning of micro and nano-topographies on poly(vinyl alcohol) hydrogel for improved endothelial cell responses

Poly(vinyl alcohol) hydrogel (PVA) is a widely used material for biomedical devices, yet there is a need to enhance its biological functionality for in vitro and in vivo vascular application. Significance of surface topography in modulating cellular behaviour is increasingly evident. However, hydrogel patterning remains challenging. Using a casting method, planar PVA were patterned with micro-sized features. To achieve higher patterning resolution, nanoimprint lithography with high pressure and temperature was used. In vitro experiment showed enhanced human endothelial cell (EC) density and adhesion on patterned PVA. Additional chemical modification via nitrogen gas plasma on patterned PVA further improved EC density and adhesion. Only EC monolayer grown on plasma modified PVA with 2 μm gratings and 1.8 μm concave lens exhibited expression of vascular endothelial cadherin, indicating EC functionality. Patterning of the luminal surface of tubular hydrogels is not widely explored. The study presents the first method for simultaneous tubular molding and luminal surface patterning of hydrogel. PVA graft with 2 μm gratings showed patency and endothelialization, while unpatterned grafts were occluded after 20 days in rat aorta. The reproducible, high yield and high-fidelity methods enable planar and tubular patterning of PVA and other hydrogels to be used for biomedical applications.

Conjugated polymers for the optical control of the electrical activity of living cells

Different conjugated polymers are proposed as bio-optical interfaces. Selected polymers are capable to sustain thermal sterilization but provide different optical coupling with living cells.

In vitro and ex vivo hemocompatibility of off-the-shelf modified poly(vinyl alcohol) vascular grafts

Synthetic small diameter vascular grafts with mechanical properties of native arteries, resistance to thrombosis and capacity to stimulate in situ endothelialization are an unmet clinical need. Poly(vinyl alcohol) hydrogel (PVA) is an excellent candidate as a vascular graft due to its tunable mechanical properties. However, the hydrophilicity and bio-inertness of PVA prevents endothelialization in vivo. We hypothesize that the modification of PVA with biomolecules and topographies creates a hemocompatible environment that also enhances bioactivity. PVA modified with fibronectin, RGDS peptide, cyclicRGD (cRGD) peptide, or heparin provided cell-adhesion motifs, which were confirmed by detection of nitrogen through X-ray photoelectron spectroscopy. Protein- and peptide-modified surfaces showed a slight increase in human vascular endothelial cell proliferation over unmodified PVA. With the exception of fibronectin modification, modified surfaces showed in vitro hemocompatibility comparable with unmodified PVA. To further improve bioactivity, cRGD-PVA was combined with gratings and microlens topographies. Combined modifications of 2 μm gratings or convex topography and cRGD significantly improved human vascular endothelial cell viability on PVA. In vitro hemocompatibility testing showed that topography on cRGD-PVA did not significantly trigger an increase of platelet adhesion or activation compared with unpatterned PVA. Using the more physiologically relevant ex vivo hemocompatibility testing, all PVA grafts tested showed similar platelet adhesion to ePTFE and significantly lower platelet accumulation compared to collagen-coated ePTFE grafts. The biochemical and topographical modification of PVA demonstrates excellent hemocompatibility with enhanced bioactivity of PVA, thus highlighting its potential as a vascular graft.

STATEMENT OF SIGNIFICANCE

New synthetic small diameter vascular grafts with mechanical properties, blood-clot resistance and endothelial lining mimicking native arteries remains an unresolved critical clinical need. We aim to achieve this by modifying the mechanically-tunable poly(vinyl alcohol) hydrogel (PVA) vascular graft with both biochemical and biophysical cues in the lumenal surface. PVA modified with cyclic RGD peptide and ordered micrometer-sized topography showed low platelet adhesion in both a rabbit in vitro and baboon ex vivo blood compatibility assay. Modified PVA also exhibited significant enhancement of human vascular endothelial cell viability and proliferation in vitro. The readily available, modified PVA grafts are the first to show biophysical and biochemical modification in a three-dimensional scaffold with hemocompatibility, biofunctionality and excellent potential for clinical application.

Fibrinogen adsorption and platelet adhesion to silica surfaces with stochastic nanotopography

In this study, the effect of surface nanoscale roughness on fibrinogen adsorption and platelet adhesion was investigated. Nanorough silica surfaces with a low level of surface roughness (10 nm Rrms) were found to support the same level of fibrinogen adsorption as the planar silica surfaces, while nanorough silica surfaces with higher levels of surface roughness (15 nm Rrms) were found to support significantly less fibrinogen adsorption. All surfaces analyzed were found to support the same level of platelet adhesion; however, platelets were rounded in morphology on the nanorough silica surfaces while platelets were spread with a well-developed actin cytoskeleton on the planar silica. Unique quartz crystal microbalance with dissipation monitoring (QCM-D) responses was observed for the interactions between platelets and each of the surfaces. The QCM-D data indicated that platelets were more weakly attached to the nanorough silica surfaces compared with the planar silica. These data support the role of surface nanotopography in directing platelet-surface interactions even when the adsorbed fibrinogen layer is able to support the same level of platelet adhesion.

Innate Immunity and Biomaterials at the Nexus: Friends or Foes

Biomaterial implants are an established part of medical practice, encompassing a broad range of devices that widely differ in function and structural composition. However, one common property amongst biomaterials is the induction of the foreign body response: an acute sterile inflammatory reaction which overlaps with tissue vascularisation and remodelling and ultimately fibrotic encapsulation of the biomaterial to prevent further interaction with host tissue. Severity and clinical manifestation of the biomaterial-induced foreign body response are different for each biomaterial, with cases of incompatibility often associated with loss of function. However, unravelling the mechanisms that progress to the formation of the fibrotic capsule highlights the tightly intertwined nature of immunological responses to a seemingly noncanonical “antigen.” In this review, we detail the pathways associated with the foreign body response and describe possible mechanisms of immune involvement that can be targeted. We also discuss methods of modulating the immune response by altering the physiochemical surface properties of the biomaterial prior to implantation. Developments in these areas are reliant on reproducible and effective animal models and may allow a “combined” immunomodulatory approach of adapting surface properties of biomaterials, as well as treating key immune pathways to ultimately reduce the negative consequences of biomaterial implantation.

Effect of the Materials Properties of Hydroxyapatite Nanoparticles on Fibronectin Deposition and Conformation

Hydroxyapatite (HAP, Ca₁₀(PO₄)₆(OH)₂) nanoparticles with controlled materials properties have been synthesized through a two-step hydrothermal aging method to investigate fibronectin (Fn) adsorption. Two distinct populations of HAP nanoparticles have been generated: HAP1 particles had smaller size, plate-like shape, lower crystallinity, and more negative ζ potential than HAP2 particles. We then developed two-dimensional platforms containing HAP and Fn and analyzed both the amount and the conformation of Fn via Förster resonance energy transfer (FRET) at various HAP concentrations. Our FRET analysis reveals that larger amounts of more compact Fn molecules were adsorbed onto HAP1 than onto HAP2 particles. Additionally, our data show that the amount of compact Fn adsorbed increased with increasing HAP concentration due to the formation of nanoparticle agglomerates. We propose that both the surface chemistry of single nanoparticles and the size and morphology of HAP agglomerates play significant roles in the interaction of Fn with HAP. Collectively, our findings suggest that the HAP-induced conformational changes of Fn, a critical mechanotransducer protein involved in the communication of cells with their environment, will ultimately affect downstream cellular behaviors. These results have important implications for our understanding of organic-inorganic interactions in physiological and pathological biomineralization processes such as HAP-related inflammation.

Regulation of stem cell fate by nanomaterial substrates

Stem cells are increasingly studied because of their potential to underpin a range of novel therapies, including regenerative strategies, cell type-specific therapy and tissue repair, among others. Bionanomaterials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. New advances in these fields are presented in this review. This work highlights the importance of topography and elasticity of the nano-/micro-environment, or niche, for the initiation and induction of stem cell differentiation and proliferation.

Interaction of human osteoblast-like Saos-2 and MG-63 cells with thermally oxidized surfaces of a titanium-niobium alloy

An investigation was made of the adhesion, growth and differentiation of osteoblast-like MG-63 and Saos-2 cells on titanium (Ti) and niobium (Nb) supports and on TiNb alloy with surfaces oxidized at 165°C under hydrothermal conditions and at 600°C in a stream of air. The oxidation mode and the chemical composition of the samples tuned the morphology, topography and distribution of the charge on their surfaces, which enabled us to evaluate the importance of these material characteristics in the interaction of the cells with the sample surface. Numbers of adhered MG-63 and Saos-2 cells correlated with the number of positively-charged (related with the Nb₂O₅ phase) and negatively-charged sites (related with the TiO₂ phase) on the alloy surface. Proliferation of these cells is correlated with the presence of positively-charged (i.e. basic) sites of the Nb₂O₅ alloy phase, while cell differentiation is correlated with negatively-charged (acidic) sites of the TiO₂ alloy phase. The number of charged sites and adhered cells was substantially higher on the alloy sample oxidized at 600°C than on the hydrothermally treated sample at 165°C. The expression values of osteoblast differentiation markers (collagen type I and osteocalcin) were higher for cells grown on the Ti samples than for those grown on the TiNb samples. This was more particularly apparent in the samples treated at 165°C. No considerable immune activation of murine macrophage-like RAW 264.7 cells on the tested samples was found. The secretion of TNF-α by these cells into the cell culture media was much lower than for either cells grown in the presence of bacterial lipopolysaccharide, or untreated control samples. Thus, oxidized Ti and TiNb are both promising materials for bone implantation; TiNb for applications where bone cell proliferation is desirable, and Ti for induction of osteogenic cell differentiation.

The synergistic effect of nanotopography and sustained dual release of hydrophobic and hydrophilic neurotrophic factors on human mesenchymal stem cell neuronal lineage commitment

A combination of nanotopography and controlled release is a potential platform for neuronal tissue engineering applications. Previous studies showed that combining both physical and chemical guidance was more effective than individual cues in the directional promotion of neurite outgrowth. Nanotopography can direct human mesenchymal stem cells (hMSCs) into neuronal lineage, while controlled release of neurotrophic factors can deliver temporally controlled biochemical signals. Hypothesizing that the synergistic effect will enhance neuronal lineage commitment of hMSCs, a fabrication method for multiple neurotrophic factors delivery from a single nanopatterned (350 nm gratings), poly-ɛ-caprolactone (PCL) film was developed and evaluated. Our results showed a synergistic effect on hMSC differentiation cultured on substrates with both nanotopographical and biochemical cues. The protein/drug encapsulation into PCL nanopatterned films was first optimized using a hydrophilic model protein, bovine serum albumin. The hydrophobic retinoic acid (RA) molecule was directly incorporated into PCL films. To achieve sustained release, hydrophilic nerve growth factor (NGF) was first encapsulated within polyelectrolyte complexation fibers before they were embedded within the nanopatterned PCL film. Our results showed that nanotopography on the fabricated polymer films remained intact, while release of bioactive RA and NGF was sustained over a period of 3 weeks. Under the combinatorial effect of physical and biochemical cues, we observed an enhanced upregulation of neuronal genes such as microtubule-associated protein 2 (MAP2) and neurofilament light (NFL) as compared with sustained delivery of individual cues and bolus delivery. Quantitative polymerase chain reaction analysis showed that MAP2 and NFL gene upregulation in hMSCs was most pronounced on the nanogratings with sustained release of both RA and NGF. The fabricated platforms supported the sustained delivery of multiple neurotrophins, including both hydrophobic and hydrophilic therapeutic agents, while providing surface patterning versatility for application in neural regeneration and tissue engineering.

Nanoscale roughness affects the activity of enzymes adsorbed on cluster-assembled titania films

In this study, we investigated how the adsorption properties governed by the nanometer-scale surface morphology of cluster-assembled titanium oxide films influence the catalytic activity of immobilized serine-protease trypsin. We developed an activity assay for the parallel detection of physisorbed enzyme activity and mass density of the adsorbed proteins in microarray format. The method combines a microarray-based technique and advanced quantitative confocal microscopy approaches based on fluorescent labeling of enzymes and covalent labeling of active sites of surface-bound enzymes. The observed diminishing trypsin binding affinity with increasing roughness, as opposed to the steep rise in its saturation uptake, was interpreted as heterogeneous nucleation-driven adsorption of trypsin at the rough nanoporous titania surface. The increase in relative activity of adsorbed trypsin is proportional to the fractional saturation of titania surfaces, expressed as percentage of saturation uptake. In turn, the specific activity, that is, the ratio of active proteins to the absolute number of adsorbed proteins, drops with growing saturation uptake and surface roughness, witnessing a reduction in the accessibility of enzyme active sites. Both geometrical constraints of titania nanopores and the clusterwise adsorption of trypsin were identified as the key factors underpinning the steric hindrance of the immobilized enzyme. These findings are relevant for the optimization of rough nanoporous surfaces as carriers of immobilized enzymes. The proposed activity assay is particularly advantageous in the screening of candidate materials for enzyme immobilization.

Genetically engineered bacteriophage delivers a tumor necrosis factor alpha antagonist coating on neural electrodes

This paper reports a novel approach for the formation of anti-inflammatory surface coating on a neural electrode. The surface coating is realized using a recombinant f88 filamentous bacteriophage, which displays a short platinum binding motif and a tumor necrosis factor alpha antagonist (TNF-α antagonist) on p3 and p8 proteins, respectively. The recombinant bacteriophages are immobilized on the platinum surface by a simple dip coating process. The selective and stable immobilization of bacteriophages on a platinum electrode is confirmed by quartz crystal microbalance with dissipation monitoring, atomic force microscope and fluorescence microscope. From the in vitro cell viability test, the inflammatory cytokine (TNF-α) induced cell death was prevented by presenting recombinant bacteriophage coating, albeit with no significant cytotoxic effect. It is also observed that the bacteriophage coating does not have critical effects on the electrochemical properties such as impedance and charge storage capacities. Thus, this approach demonstrates a promising anti-apoptotic as well as anti-inflammatory surface coating for neural implant applications.

Quantitative determination of protein molecular weight with an acoustic sensor; significance of specific versus non-specific binding

A multi-analyte acoustic biosensor determines the molecular weight of proteinsviathe phase change of the acoustic signal.

Quantifying fibronectin adhesion with nanoscale spatial resolution on glycosaminoglycan doped polypyrrole using Atomic Force Microscopy

BACKGROUND

The interaction of ECM proteins is critical in determining the performance of materials used in biomedical applications such as tissue regeneration, implantable bionics and biosensing.

METHODS

To improve our understanding of ECM protein-conducting polymer interactions, we have used Atomic Force Microscopy (AFM) to elucidate the interactions of fibronectin (FN) on polypyrrole (PPy) doped with different glycosaminoglycans.

RESULTS

We were able to classify four main types of FN interactions, including those related to 1) non-specific adhesion, 2) protein unfolding and subsequent unbinding from the surface, 3) desorption and 4) interactions with no adhesion. FN adhesion on PPy/hyaluronic acid showed a significantly lower density of surface adhesion with the adhesion restricted to nodule structures, as opposed to their peripheries, of the polymer morphology. In contrast, PPy/chondroitin sulfate showed a significantly higher density of surface adhesion to the point where the distribution of adhesion effectively masked the topography. Through conductive AFM imaging, we found that the conductive regions correlated with regions of FN adhesion.

CONCLUSIONS

Given that the conductivity requires doping of the polymer, these findings suggest that FN adhesion is mediated by interactions with chondroitin sulfate and hyaluronic acid at the polymer surface and may be indicative of specific interactions due to contributions from electrostatic attraction between the FN and sulfate/anionic groups of the dopants.

GENERAL SIGNIFICANCE

This study demonstrates the ability of AFM to resolve the protein-conducting polymer interactions at the molecular and nanoscale level, which will be important for interfacing these polymer materials with biological systems. This article is part of a Special Issue entitled Organic Bioelectronics - Novel Applications in Biomedicine.

Engineering a biocompatible scaffold with either micrometre or nanometre scale surface topography for promoting protein adsorption and cellular response

Surface topographical features on biomaterials, both at the submicrometre and nanometre scales, are known to influence the physicochemical interactions between biological processes involving proteins and cells. The nanometre-structured surface features tend to resemble the extracellular matrix, the natural environment in which cells live, communicate, and work together. It is believed that by engineering a well-defined nanometre scale surface topography, it should be possible to induce appropriate surface signals that can be used to manipulate cell function in a similar manner to the extracellular matrix. Therefore, there is a need to investigate, understand, and ultimately have the ability to produce tailor-made nanometre scale surface topographies with suitable surface chemistry to promote favourable biological interactions similar to those of the extracellular matrix. Recent advances in nanoscience and nanotechnology have produced many new nanomaterials and numerous manufacturing techniques that have the potential to significantly improve several fields such as biological sensing, cell culture technology, surgical implants, and medical devices. For these fields to progress, there is a definite need to develop a detailed understanding of the interaction between biological systems and fabricated surface structures at both the micrometre and nanometre scales.

A comprehensive study of lysozyme adsorption using dual polarization interferometry and quartz crystal microbalance with dissipation

Protein adsorption plays a crucial role in biomaterial surface science as it is directly linked to the biocompatibility of artificial biomaterial devices. Here, elucidation of protein adsorption mechanism is effected using dual polarization interferometry and a quartz crystal microbalance to characterize lysozyme layer properties on a silica surface at different coverage values. Lysozyme is observed to adsorb from sparse monolayer to multilayer coverage. At low coverage an irreversibly adsorbed layer is formed with slight deformation consistent with side-on orientation. At higher coverage values dynamic re-orientation effects are observed which lead to monolayer surface coverages of 2-3 ng/mm² corresponding to edge-on or/and end-on orientations. These monolayer thickness values ranged between 3 and 4.5 nm with a protein density value of 0.60 g/mL and with 50 wt% solvent mass. Further increase of coverage results formation of a multilayer structure. Using the hydration content and other physical layer properties a tentative model lysozyme adsorption is proposed.