Effect of Cations on the Structure of Bilayers Formed by Lipopolysaccharides Isolated from Pseudomonas aeruginosa PAO1

Molecular interactions with bilayer membrane stacks using neutron and X-ray diffraction

Lamellar unit cell reconstruction from neutron and X-ray diffraction data provides information about the disposition and position of molecules and molecular segments with respect to the bilayer. When supplemented with the judicious use of molecular deuteration, the technique probes the molecular interactions and conformations within the bilayer membrane and the water layer which constitute the crystallographic unit cell. The perspective is model independent, and potentially, with a higher degree of resolution than is available with other techniques. In the case of neutron diffraction the measurement consists of carefully normalised diffracted intensity under conditions of contrast variation of the water layer. The subsequent Fourier reconstruction of the unit cell is made using the phase information from variation of peak intensities with contrast. Although the phase problem is not as easily solved for the corresponding X-ray measurements, an intuitive approach can often suffice. Here we discuss the two complimentary techniques as probes of scattering length density profiles of a bilayer, and how such a perspective provides information about the location and orientation of molecules within or between lipid bilayers. Within the basic paradigm of lamellar phases this method has provided, for example, detailed insights into the location and interaction of cryoprotectants and stress proteins, of the mechanisms of actions of viral proteins, antimicrobial compounds and drugs, and the underlying structure of the stratum corneum. In this paper we review these techniques and provide examples of the systems that have been examined. We finish with a future outlook on the use of these techniques to improve our understanding of the interactions of membranes with biomolecules.

Integrating Navajo Pottery Techniques To Improve Silver Nanoparticle-Enabled Ceramic Water Filters for Disinfection

Point-of-use treatment technologies can increase access to safe drinking water in rural areas. Sustained use of these technologies is uncommon due to oversight of community needs, user-perceived risks, long-term maintenance, and conflict with traditional practices. Nanosilver-enabled ceramic water filters are unique due to the use of locally sourced materials available at or near the target community; however, technical limitations persist (e.g., nanosilver's uncontrolled release and passivation from sulfide or chloride). This work aims to overcome these limitations by impregnating nanosilver onto ceramics with a Navajo pottery rosin, collected from pinyon trees with a third-generation artisan. Here, we investigate this sustainable and novel material for drinking water treatment; the study ranges from a proof of concept to testing under realistic conditions. Results show that when embedded in a thin film, the biopolymer controlled ionic silver dissolution and prevented silver passivation from sulfide and chloride. When applied to ceramic filters, the biopolymer effectively immobilized nanosilver in a range of waters. Over a 25 day study to emulate household-use conditions, this coating method sustained disinfection of a coculture of Gram-positive and Gram-negative bacteria while controlling biofouling. Overall, the use of this Navajo pottery material can facilitate adoption while providing the needed technological advancement to these widely used treatment devices.

Exploring the Molecular Dynamics of a Lipid-A Vesicle at the Atom Level: Morphology and Permeation Mechanism

Lipid-A was previously shown to spontaneously aggregate into a vesicle via the hybrid particle field approach. We assess the validity of the proposed vesiculation mechanism by simulating the resulting lipid-A vesicle at the atom level. The spatial confinement imposed by the vesicle geometry on the conformation and packing of lipid-A induces significant heterogeneity of physical properties in the inner and outer leaflets. It also induces tighter molecular packing and lower acyl chain order compared to the lamellar arrangement. Around 5% of water molecules passively permeates the vesicle membrane inward and outward. The permeation is facilitated by interactions with water molecules that are transported across the membrane by a network of electrostatic interactions with the hydrogen bond donors/acceptors in the N-acetylglucosamine ring and upper region of the acyl chains of lipid-A. The permeation process takes place at low rates but still at higher frequencies than observed for the lamellar arrangement of lipid-A. These findings not only substantiate the proposed lipid-A vesiculation mechanism but also reveal the complex structural dynamics of an important nonlamellar arrangement of lipid-A.

Effect of Glycosylation on Self-Assembly of Lipid A Lipopolysaccharides in Aqueous Solutions

Lipopolysaccharides (LPSs) based on lipid A produced by bacteria are of interest due to their bioactivity in stimulating immune responses, as are simpler synthetic components or analogues. Here, the self-assembly in water of two monodisperse lipid A derivatives based on simplified bacterial LPS structures is examined and compared to that of a native Escherichia coli LPS using small-angle X-ray scattering and cryogenic transmission electron microscopy. The critical aggregation concentration is obtained from fluorescence probe experiments, and conformation is probed using circular dichroism spectroscopy. The E. coli LPS is found to form wormlike micelles, whereas the synthetic analogues bearing six lipid chains and with four or two saccharide head groups (Kdo₂-lipid A and monophosphoryl lipid A) self-assemble into nanosheets or vesicles, respectively. These observations are rationalized by considering the surfactant packing parameter.

Structure-Thermodynamic Relationship of a Polysaccharide Gel (Alginate) as a Function of Water Content and Counterion Type (Na vs Ca)

Biofilms are the predominant mode of microbial life on Earth, and so a deep understanding of microbial communities─and their impacts on environmental processes─requires a firm understanding of biofilm properties. Because of the importance of biofilms to their microbial inhabitants, microbes have evolved different ways of engineering and reconfiguring the matrix of extracellular polymeric substances (EPS) that constitute the main non-living component of biofilms. This ability makes it difficult to distinguish between the biotic and abiotic origins of biofilm properties. An important route toward establishing this distinction has been the study of simplified models of the EPS matrix. This study builds on such efforts by using atomistic simulations to predict the nanoscale (≤10 nm scale) structure of a model EPS matrix and the sensitivity of this structure to interpolymer interactions and water content. To accomplish this, we use replica exchange molecular dynamics (REMD) simulations to generate all-atom configurations of ten 3.4 kDa alginate polymers at a range of water contents and Ca-Na ratios. Simulated systems are solvated with explicitly modeled water molecules, which allows us to capture the discrete structure of the hydrating water and to examine the thermodynamic stability of water in the gels as they are progressively dehydrated. Our primary findings are that (i) the structure of the hydrogels is highly sensitive to the identity of the charge-compensating cations, (ii) the thermodynamics of water within the gels (specific enthalpy and free energy) are, surprisingly, only weakly sensitive to cation identity, and (iii) predictions of the differential enthalpy and free energy of hydration include a short-ranged enthalpic term that promotes hydration and a longer-ranged (presumably entropic) term that promotes dehydration, where short and long ranges refer to distances shorter or longer than ∼0.6 nm between alginate strands.

New understanding of multidrug efflux and permeation in antibiotic resistance, persistence, and heteroresistance

Antibiotics effective against Gram-negative ESKAPE pathogens are a critical area of unmet need. Infections caused by these pathogens are not only difficult to treat but finding new therapies to overcome Gram-negative resistance is also a challenge. There are not enough antibiotics in development that target the most dangerous pathogens and there are not enough novel drugs in the pipeline. The major obstacle in the antibiotic discovery pipeline is the lack of understanding of how to breach antibiotic permeability barriers of Gram-negative pathogens. These barriers are created by active efflux pumps acting across both the inner and the outer membranes. Overproduction of efflux pumps alone or together with either modification of the outer membrane or antibiotic-inactivating enzymes and target mutations contribute to clinical levels of antibiotics resistance. Recent efforts have generated significant advances in the rationalization of compound efflux and permeation across the cell envelopes of Gram-negative pathogens. Combined with earlier studies and novel mathematical models, these efforts have led to a multilevel understanding of how antibiotics permeate these barriers and how multidrug efflux and permeation contribute to the development of antibiotic resistance and heteroresistance. Here, we discuss the new developments in this area.

New antimicrobial peptide-antibiotic combination strategy for Pseudomonas aeruginosa inactivation

Novel antimicrobials or new treatment strategies are urgently needed to treat Pseudomonas aeruginosa (P. aeruginosa) related infections and especially to address the problem of antibiotic resistance. We propose a novel strategy that combines the human antimicrobial peptide (AMP) LL37 with different antibiotics to find synergistic AMP-antibiotic combinations against P. aeruginosa strains in vitro. Our results showed that LL37 exhibited synergistic inhibitory and bactericidal effects against P. aeruginosa strains PAO1 and PA103 when combined with the antibiotics vancomycin, azithromycin, polymyxin B, and colistin. In addition, LL37 caused strong outer membrane permeabilization, as demonstrated through measurement of an increased uptake of the fluorescent probe N-phenyl-1-naphthylamine. The membrane permeabilization effects appear to explain why it was easier to rescue the effectiveness of the antibiotic toward the bacteria because the outer membrane of P. aeruginosa exhibits barrier function for antibiotics. Furthermore, the change in the zeta potential was measured for P. aeruginosa strains with the addition of LL37. Zeta potentials for P. aeruginosa strains PAO1 and PA103 were -40.9 and -10.9 mV, respectively. With the addition of LL37, negative zeta potentials were gradually neutralized. We found that positively charged LL37 can interact with and neutralize the negatively charged bacterial outer membrane through electrostatic interactions, and the process of neutralization is believed to have contributed to the increase in outer membrane permeability. Finally, to further illustrate the relationship between outer membrane permeabilization and the uptake of antibiotics, we used LL37 to make the outer membrane of P. aeruginosa strains more permeable, and minimum inhibitory concentrations (MICs) for several antibiotics (colistin, gentamicin, polymyxin B, vancomycin, and azithromycin) were measured. The MICs decreased were twofold to fourfold, in general. For example, the MICs of azithromycin and vancomycin decreased more than fourfold when against P. aeruginosa strain PAO1, which were the greatest decrease of any of the antibiotics tested in this experiment. As for PA103, the MIC of polymyxin B2 decreased fourfold, which was the strongest decrease seen for any of the antibiotics tested in this experiment. The increased uptake of antibiotics not only demonstrates the barrier role of the outer membrane but also validates the mechanism of synergistic effects that we have proposed. These results indicate the great potential of an LL37-antibiotic combination strategy and provide possible explanations for the mechanisms behind this synergy.

Lipopolysaccharides at Solid and Liquid Interfaces: Models for Biophysical Studies of the Gram-negative Bacterial Outer Membrane

Lipopolysaccharides (LPSs) are a constitutive element of the cell envelope of Gram-negative bacteria, representing the main lipid in the external leaflet of their outer membrane (OM) lipid bilayer. These unique surface-exposed glycolipids play a central role in the interactions of Gram-negative organisms with their surrounding environment and represent a key element for protection against antimicrobials and the development of antibiotic resistance. The biophysical investigation of a wide range of different types of in vitro model membranes containing reconstituted LPS has revealed functional and structural properties of these peculiar membrane lipids, providing molecular-level details of their interaction with antimicrobial compounds. LPS assemblies reconstituted at interfaces represent a versatile tool to study the properties of the Gram-negative OM by exploiting several surface-sensitive techniques, in particular X-ray and neutron scattering, which can probe the structure of thin films with sub-nanometer resolution. This review provides an overview of different approaches employed to investigate structural and biophysical properties of LPS, focusing on studies on Langmuir monolayers of LPS at the air/liquid interface and a range of supported LPS-containing model membranes reconstituted at solid/liquid interfaces.

Clinically Relevant Bacterial Outer Membrane Models for Antibiotic Screening Applications

Antibiotic resistance is a growing global health concern that has been increasing in prevalence over the past few decades. In Gram-negative bacteria, the outer membrane is an additional barrier through which antibiotics must traverse to kill the bacterium. In addition, outer membrane features and properties, like membrane surface charge, lipopolysaccharide (LPS) length, and membrane porins, can be altered in response to antibiotics and therefore, further mediate resistance. Model membranes have been used to mimic bacterial membranes to study antibiotic-induced membrane changes but often lack the compositional complexity of the actual outer membrane. Here, we developed a surface-supported membrane platform using outer membrane vesicles (OMVs) from clinically relevant Gram-negative bacteria and use it to characterize membrane biophysical properties and investigate its interaction with antibacterial compounds. We demonstrate that this platform maintains critical features of outer membranes, like fluidity, while retaining complex membrane components, like OMPs and LPS, which are central to membrane-mediated antibiotic resistance. This platform offers a non-pathogenic, cell-free surface to study such phenomena that is compatible with advanced microscopy and surface characterization tools like quartz crystal microbalance. We confirm these OMV bilayers recapitulate membrane interactions (or lack thereof) with the antibiotic compounds polymyxin B, bacitracin, and vancomycin, validating their use as representative models for the bacterial surface. By forming OMV bilayers from different strains, we envision that this platform could be used to investigate underlying biophysical differences in outer membranes leading to resistance, to screen and identify membrane-active antibiotics, or for the development of phage technologies targeting a particular membrane surface component.

The tug of war between Al3+ and Na+ for order-disorder transitions in lipid-A membranes

Cations play a critical role in the stability and morphology of lipid-A aggregates by neutralizing, hydrating and cross-linking these glycolipid molecules. Monophosphorylated lipid-A is the major immunostimulatory principle in commercially available adjuvants containing Al3+ such as adjuvant system 04 (AS04). The antagonist/agonist immunomodulatory properties of lipid-A are associated with chemical variations (e.g. the number of acyl chains and phosphate groups) and their aggregate arrangements (e.g. lamellar, nonlamellar or mixed). Therefore, the identification of the active form of lipid-A can provide valuable guidance in the development of vaccine adjuvants capable of boosting the immune system with decreased reactogenicity. Although the effect of mono and divalent cations on the structural polymorphism and endotoxicity of LPS has been previously investigated, much less is known about the effect of trivalent cations. We have investigated the effect of NaCl and AlCl3 salt solutions on the structural dynamics and stability of mono and diphosphorylated lipid-A membranes via atomistic MD simulations. The Al3+ ion exerts two major effects on the structural dynamics of lipid-A membranes. It acts as an efficient cross-linker of mono or diphosphorylated lipid-A molecules, thus stabilizing the lamellar arrangement of these glycolipids. It also alters the lipid-A packing and membrane fluidity, inducing disorder → order structural transitions of the membrane. This effect is promptly reversed upon the addition of NaCl solution, which promotes a nearly threefold increase in the amount of water in the carbohydrate moiety of the Al3+-containing lipid-A membranes. The exchange dynamics and residence times of cation-coordinated water molecules in these membranes provide insights into the molecular mechanism for the Na+-induced transition from a densely packed ordered phase to a disordered one. Al3+ counter-ions favor ordered lamellar aggregates, which has been previously associated with the lack of endotoxic activity and cytokine-inducing action. The resulting microscopic understanding of the structure and dynamics of lipid-A aggregates in the presence of Al3+ and Na+ salts can provide valuable guidance in the development of vaccine adjuvants capable of boosting the immune system with decreased reactogenicity.

Dual-Function Potentiation by PEG-BPEI Restores Activity of Carbapenems and Penicillins against Carbapenem-Resistant Enterobacteriaceae

The rise of life-threatening carbapenem-resistant Enterobacteriaceae (CRE) infections has become a critical medical threat. Some of the most dangerous CRE bacteria can produce enzymes that degrade a wide range of antibiotics, including carbapenems and β-lactams. Infections by CRE have a high mortality rate, and survivors can have severe morbidity from treatment with toxic last-resort antibiotics. CRE have mobile genetic elements that transfer resistance genes to other species. These bacteria also circulate throughout the healthcare system. The mobility and spread of CRE need to be curtailed, but these goals are impeded by having few agents that target a limited range of pathogenic CRE species. Against CRE possessing the metallo-β-lactamase NDM-1, Klebsiella pneumoniae ATCC BAA-2146 and Escherichia coli ATCC BAA-2452, the potentiation of meropenem and imipenem is possible with low-molecular weight branched polyethylenimine (600 Da BPEI) and its poly(ethylene glycol) (PEG)ylated derivative (PEG-BPEI) that has a low in vivo toxicity. The mechanism of action is elucidated with fluorescence assays of drug influx and isothermal calorimetry data showing the chelation of essential Zn2+ ions. These results suggested that 600 Da BPEI and PEG-BPEI may also improve the uptake of antibiotics and β-lactamase inhibitors. Indeed, the CRE E. coli strain is rendered susceptible to the combination of piperacillin and tazobactam. These results expand the possible utility of 600 Da BPEI potentiators, where previously we have demonstrated the ability to improve antibiotic efficacy against antibiotic resistant clinical isolates of Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis.

Evolution of the analytical scattering model of live Escherichia coli

A previously reported multi-scale model for (ultra-)small-angle X-ray (USAXS/SAXS) and (very) small-angle neutron scattering (VSANS/SANS) of live Escherichia coli was revised on the basis of compositional/metabolomic and ultrastructural constraints. The cellular body is modeled, as previously described, by an ellipsoid with multiple shells. However, scattering originating from flagella was replaced by a term accounting for the oligosaccharide cores of the lipopolysaccharide leaflet of the outer membrane including its cross-term with the cellular body. This was mainly motivated by (U)SAXS experiments showing indistinguishable scattering for bacteria in the presence and absence of flagella or fimbrae. The revised model succeeded in fitting USAXS/SAXS and differently contrasted VSANS/SANS data of E. coli ATCC 25922 over four orders of magnitude in length scale. Specifically, this approach provides detailed insight into structural features of the cellular envelope, including the distance of the inner and outer membranes, as well as the scattering length densities of all bacterial compartments. The model was also successfully applied to E. coli K12, used for the authors' original modeling, as well as for two other E. coli strains. Significant differences were detected between the different strains in terms of bacterial size, intermembrane distance and its positional fluctuations. These findings corroborate the general applicability of the approach outlined here to quantitatively study the effect of bactericidal compounds on ultrastructural features of Gram-negative bacteria without the need to resort to any invasive staining or labeling agents.

Molecular dynamics simulations of bacterial outer membrane lipid extraction: Adequate sampling?

The outer membrane of Gram-negative bacteria is almost exclusively composed of lipopolysaccharide in its outer leaflet, whereas the inner leaflet contains a mixture of phospholipids. Lipopolysaccharide diffuses at least an order of magnitude slower than phospholipids, which can cause issues for molecular dynamics simulations in terms of adequate sampling. Here, we test a number of simulation protocols for their ability to achieve convergence with reasonable computational effort using the MARTINI coarse-grained force-field. This is tested in the context both of potential of mean force (PMF) calculations for lipid extraction from membranes and of lateral mixing within the membrane phase. We find that decoupling the cations that cross-link the lipopolysaccharide headgroups from the extracted lipid during PMF calculations is the best approach to achieve convergence comparable to that for phospholipid extraction. We also show that lateral lipopolysaccharide mixing/sorting is very slow and not readily addressable even with Hamiltonian replica exchange. We discuss why more sorting may be unrealistic for the short (microseconds) timescales we simulate and provide an outlook for future studies of lipopolysaccharide-containing membranes.

Out of Sight, Out of Mind: The Effect of the Equilibration Protocol on the Structural Ensembles of Charged Glycolipid Bilayers

Molecular dynamics (MD) simulations represent an essential tool in the toolbox of modern chemistry, enabling the prediction of experimental observables for a variety of chemical systems and processes and majorly impacting the study of biological membranes. However, the chemical diversity of complex lipids beyond phospholipids brings new challenges to well-established protocols used in MD simulations of soft matter and requires continuous assessment to ensure simulation reproducibility and minimize unphysical behavior. Lipopolysaccharides (LPS) are highly charged glycolipids whose aggregation in a lamellar arrangement requires the binding of numerous cations to oppositely charged groups deep inside the membrane. The delicate balance between the fully hydrated carbohydrate region and the smaller hydrophobic core makes LPS membranes very sensitive to the choice of equilibration protocol. In this work, we show that the protocol successfully used to equilibrate phospholipid bilayers when applied to complex lipopolysaccharide membranes occasionally leads to a small expansion of the simulation box very early in the equilibration phase. Although the use of a barostat algorithm controls the system dimension and particle distances according to the target pressure, fluctuation in the fleeting pressure occasionally enables a few water molecules to trickle into the hydrophobic region of the membrane, with spurious solvent buildup. We show that this effect stems from the initial steps of NPT equilibration, where initial pressure can be fairly high. This can be solved with the use of a stepwise-thermalization NVT/NPT protocol, as demonstrated for atomistic MD simulations of LPS/DPPE and lipid-A membranes in the presence of different salts using an extension of the GROMOS forcefield within the GROMACS software. This equilibration protocol should be standard procedure for the generation of consistent structural ensembles of charged glycolipids starting from atomic coordinates not previously pre-equilibrated. Although different ways to deal with this issue can be envisioned, we investigated one alternative that could be readily available in major MD engines with general users in mind.

Factors That Affect the Enlargement of Bacterial Protoplasts and Spheroplasts

Cell enlargement is essential for the microinjection of various substances into bacterial cells. The cell wall (peptidoglycan) inhibits cell enlargement. Thus, bacterial protoplasts/spheroplasts are used for enlargement because they lack cell wall. Though bacterial species that are capable of gene manipulation are limited, procedure for bacterial cell enlargement does not involve any gene manipulation technique. In order to prevent cell wall resynthesis during enlargement of protoplasts/spheroplasts, incubation media are supplemented with inhibitors of peptidoglycan biosynthesis such as penicillin. Moreover, metal ion composition in the incubation medium affects the properties of the plasma membrane. Therefore, in order to generate enlarged cells that are suitable for microinjection, metal ion composition in the medium should be considered. Experiment of bacterial protoplast or spheroplast enlargement is useful for studies on bacterial plasma membrane biosynthesis. In this paper, we have summarized the factors that influence bacterial cell enlargement.

Atomic Force Microscopy Investigation of the Contributions of Listeria monocytogenes Cell-Wall Biomacromolecules to Their Adherence and Mechanics

In this work, the contributions of the pathogenic Listeria monocytogenes cell-wall biomacromolecules to the bacterial mechanics and adhesion to a model inert surface of silicon nitride in water were investigated by atomic force microscopy. Chemical ethylenediaminetetraacetic acid (EDTA) and biological enzymatic trypsin treatments of cells were performed to partially or totally remove the bacterial cell-wall proteins and carbohydrates. Removal of 48.2% proteins and 29.2% of carbohydrates from the cell-wall of the bacterium by the EDTA treatment resulted in a significant decrease in the length of the bacterial cell-wall biomacromolecules and an increase in the rigidity of the bacterial cells as predicted from fitting a model of steric repulsion to the force-distance approach data and classic Hertz model to the indentation-force data, respectively. In comparison, removal of almost all the cell-wall proteins (99.5% removal) and 8.6% of cell-wall carbohydrates by the trypsin treatment resulted in an increase in the elasticity of the bacterial cells, an increase in the extension of the cell-wall biomacromolecules, and a significant decrease in their apparent grafting densities. In addition, adhesion strength of native-untreated L. monocytogenes to silicon nitride in water decreased by 30% on average after the EDTA treatment and further decreased by 60% on average after the trypsin treatment, showing a positive correlation with the% removal of cell-wall proteins by the EDTA and trypsin treatments, respectively.

Ionic Environment Affects Bacterial Lipopolysaccharide Packing and Function

The interaction of lipopolysaccharides (LPS) with metal cations strongly affects the stability and function of the Gram-negative bacterial outer membrane. The sensitivity of deep rough (Re) LPS packing and function to the ionic environment, as affected by cation valency and ionic radius, has been determined using molecular dynamics simulations and Langmuir balance experiments. The degree of LPS aggregation within the LPS models in the presence of different cations is assessed by measuring the effective mean molecular area (Â_m) of each LPS molecule projected onto the interfacial plane at the end of the equilibration. These results are compared to the LPS mean molecular area from experimental measurements in which the LPS monolayers are assembled at the air-water interface using a Langmuir film balance. We found that packing of the LPS arrays is sensitive to the ionic radius and ion valency of the cations present in solution during LPS array packing. Using enhanced sampling of the free energy for the intercalation of oligo(allylamine HCl) (OAH) into deep rough Salmonella enterica LPS bilayers, we obtained the affinity of the core section of LPS to OAH as a function of the nature of the metal cations present in solution. We found that packing of the solvated LPS bilayer models is sensitive to ionic radius and ion valency of the neutralizing cations. This further suggests that ion bridging and steric barriers rather than charge shielding are important factors in mitigating ligand intercalation under conditions with low ionic concentrations.

Lipopolysaccharide Simulations Are Sensitive to Phosphate Charge and Ion Parameterization

The high proportion of lipopolysaccharide (LPS) molecules in the outer membrane of Gram-negative bacteria makes it a highly effective barrier to small molecules, antibiotic drugs, and other antimicrobial agents. Given this vital role in protecting bacteria from potentially hostile environments, simulations of LPS bilayers and outer membrane systems represent a critical tool for understanding the mechanisms of bacterial resistance and the development of new antibiotic compounds that circumvent these defenses. The basis of these simulations is parameterizations of LPS, which have been developed for all major molecular dynamics force fields. However, these parameterizations differ in both the protonation state of LPS and how LPS membranes behave in the presence of various ion species. To address these discrepancies and understand the effects of phosphate charge on bilayer properties, simulations were performed for multiple distinct LPS chemotypes with different ion parameterizations in both protonated or deprotonated lipid A states. These simulations show that bilayer properties, such as the area per lipid and inter-lipid hydrogen bonding, are highly influenced by the choice of phosphate group charges, cation type, and ion parameterization, with protonated LPS and monovalent cations with modified nonbonded parameters providing the best match to the experiments. Additionally, alchemical free energy simulations were performed to determine theoretical pK_a values for LPS and subsequently validated by ³¹P solid-state nuclear magnetic resonance experiments. Results from these complementary computational and experimental studies demonstrate that the protonated state dominates at physiological pH, contrary to the deprotonated form modeled by many LPS force fields. Overall, these results highlight the sensitivity of LPS simulations to phosphate charge and ion parameters while offering recommendations for how existing models should be updated for consistency between force fields as well as to best match experiments.

Aggregation of Lipid A Variants: A Hybrid Particle-Field Model

Lipid A is one of the three components of bacterial lipopolysaccharides constituting the outer membrane of Gram-negative bacteria, and is recognized to have an important biological role in the inflammatory response of mammalians. Its biological activity is modulated by the number of acyl-chains that are present in the lipid and by the dielectric medium, i.e., the type of counter-ions, through electrostatic interactions. In this paper, we report on a coarse-grained model of chemical variants of Lipid A based on the hybrid particle-field/molecular dynamics approach (hPF-MD). In particular, we investigate the stability of Lipid A bilayers for two different hexa- and tetra-acylated structures. Comparing particle density profiles along bilayer cross-sections, we find good agreement between the hPF-MD model and reference all-atom simulation for both chemical variants of Lipid A. hPF-MD models of constituted bilayers composed by hexa-acylated Lipid A in water are stable within the simulation time. We further validate our model by verifying that the phase behavior of Lipid A/counterion/water mixtures is correctly reproduced. In particular, hPF-MD simulations predict the correct self-assembly of different lamellar and micellar phases from an initially random distribution of Lipid A molecules with counterions in water. Finally, it is possible to observe the spontaneous formation and stability of Lipid A vesicles by fusion of micellar aggregates.

Dewetting-induced formation and mechanical properties of synthetic bacterial outer membrane models (GUVs) with controlled inner-leaflet lipid composition

The double-membrane cellular envelope of Gram-negative bacteria enables them to endure harsh environments and represents a barrier to many clinically available antibiotics. The outer membrane (OM) is exposed to the environment and is the first point of contact involved in bacterial processes such as signaling, pathogenesis, and motility. As in the cytoplasmic membrane, the OM in Gram-negative bacteria has a phospholipid-rich inner leaflet and an outer leaflet that is predominantly composed of lipopolysaccharide (LPS). We report on a microfluidic technique for fabricating monodisperse asymmetric giant unilamellar vesicles (GUVs) possessing the Gram-negative bacterial OM lipid composition. Our continuous microfluidic fabrication technique generates 50-150 μm diameter water-in-oil-in-water double emulsions at high-throughput. The water-oil and oil-water interfaces facilitate the self-assembly of phospholipid and LPS molecules to create the inner and outer leaflets of the lipid bilayer, respectively. The double emulsions have ultrathin oil shells, which minimizes the amount of residual organic solvent that remains trapped between the leaflets of the GUV membrane. An extraction process by ethanol and micropipette aspiration of the ultrathin oil shells triggers an adhesive interaction between the two lipid monolayers assembled on the water-oil and oil-water interfaces (i.e., dewetting transition), forcing them to contact and form a lipid bilayer membrane. The effect of different inner-leaflet lipid compositions on the emulsion/vesicle stability and the dewetting transition is investigated. We also report on the values for bending and area expansion moduli of synthetic asymmetric model membranes with lipid composition/architecture that is physiologically relevant to the OM in Pseudomonas aeruginosa bacteria.

Conformation of Single and Interacting Lipopolysaccharide Surfaces Bearing O-Side Chains

The outer surfaces of Gram-negative bacteria are composed of lipopolysaccharide (LPS) molecules exposing oligo- and polysaccharides to the aqueous environment. This unique, structurally complex biological interface is of great scientific interest as it mediates the interaction of bacteria with antimicrobial agents as well as with neighboring bacteria in colonies and biofilms. Structural studies on LPS surfaces, however, have so far dealt almost exclusively with rough mutant LPS of reduced molecular complexity and limited biological relevance. Here, by using neutron reflectometry, we structurally characterize planar monolayers of wild-type LPS from Escherichia coli O55:B5 featuring strain-specific O-side chains in the presence and absence of divalent cations and under controlled interaction conditions. The model used for the reflectivity analysis is self-consistent and based on the volume fraction profiles of all chemical components. The saccharide profiles are found to be bimodal, with dense inner oligosaccharides and more dilute, extended O-side chains. For interacting LPS monolayers, we establish the pressure-distance curve and determine the distance-dependent saccharide conformation.

Atomistic Scale Effects of Lipopolysaccharide Modifications on Bacterial Outer Membrane Defenses

Lipopolysaccharides (LPS) are a main constituent of the outer membrane of Gram-negative bacteria. Salmonella enterica, like many other bacterial species, are able to chemically modify the structure of their LPS molecules through the PhoPQ pathway as a defense mechanism against the host immune response. These modifications make the outer membrane more resistant to antimicrobial peptides (AMPs), large lipophilic drugs, and cation depletion, and are crucial for survival within a host organism. It is believed that these LPS modifications prevent the penetration of large molecules and AMPs through a strengthening of lateral interactions between neighboring LPS molecules. Here, we performed a series of long-timescale molecular dynamics simulations to study how each of three key S. enterica lipid A modifications affect bilayer properties, with a focus on membrane structural characteristics, lateral interactions, and the divalent cation bridging network. Our results discern the unique impact each modification has on strengthening the bacterial outer membrane through effects such as increased hydrogen bonding and tighter lipid packing. Additionally, one of the modifications studied shifts Ca²⁺ from the lipid A region, replacing it as a major cross-linking agent between adjacent lipids and potentially making bacteria less susceptible to AMPs that competitively displace cations from the membrane surface. These results further improve our understanding of outer membrane chemical properties and help elucidate how outer membrane modification systems, such as PhoPQ in S. enterica, are able to alter bacterial virulence.

Calcium ion induces outer membrane fusion of Deinococcus grandis spheroplasts to generate giant spheroplasts with multiple cytoplasms

Generally, enlarged spheroplasts of the Gram-negative bacterium Deinococcus grandis contain a single cytoplasm and a large periplasmic space. Enlargement of D. grandis spheroplasts requires the presence of divalent cation Ca2+ or Mg2+. In this study, we elucidated the effects of concentrations of these divalent cations on the enlargement of spheroplasts. We compared the cell sizes of the spheroplasts at five different concentrations (16.2, 62, 100, 200 and 333 mM) of CaCl2 or MgCl2. At the lowest concentration (16.2 mM) of CaCl2 or MgCl2, the inner membrane of D. grandis spheroplasts collapsed and the spheroplasts did not enlarge. At the highest concentration (333 mM) of CaCl2 or MgCl2, enlargement was inhibited. At 200 mM of CaCl2, the outer membranes of D. grandis spheroplasts were fused repeatedly, but the inner membranes were not fused. Thus, at 200 mM of CaCl2, giant cells that have multiple cytoplasms were observed and were ≥ 500 μm in diameter. However, cell fusions were not observed in any concentrations of MgCl2. This indicates that Ca2+ induces lipopolysaccharide dehydration more strongly than Mg2+ and outer membranes may be fused by hydrophobic bonding. Our findings show the different functions of Ca2+ and Mg2+ on the outer membrane stability.

Molecular dynamics modeling of Pseudomonas aeruginosa outer membranes

Pseudomonas aeruginosa is a common Gram-negative bacterium and opportunistic human pathogen. The distinctive structure of its outer membrane (OM) and outer membrane vesicles (OMVs) plays a fundamental role in bacterial virulence, colonization ability, and antibiotic resistance. To provide critical insights into OM and OMV functionality, we conducted an all-atom molecular dynamics study of asymmetric membranes that are biologically relevant to P. aeruginosa. We hybridized a GLYCAM06-based lipopolysaccharides force field with the Stockholm lipids force field (Slipids) to model bilayer membranes with Lipid A molecules in one leaflet and physiologically relevant phospholipid molecules in the other, including 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG), and 1,2-dioleoyl-sn-glycero-3-phosphoglycerol (DOPG). In particular, a membrane with phospholipid composition representing the P. aeruginosa OM was constructed and modeled by mixing the physiologically dominant components. The detailed structure of membranes was characterized by area per lipid, transmembrane mass and charge densities, radial distribution function (RDF), deuterium order parameter (SCD) of acyl chains, and inclination angles of phosphates and disaccharide in Lipid A. The membrane fluidity in equilibrium and the hydration of functional groups were probed and characterized quantitatively. The consistent properties of the Lipid A leaflets in different membranes demonstrate its compatibility with various phospholipids present in the P. aeruginosa OM. The more ordered acyl chains of Lipid A compared to the cytoplasmic cell membrane contribute to the low permeability of bacterial outer membrane. The findings of this computational investigation of P. aeruginosa OM will further the understanding of microbial pathogenesis and enable future study of OMV biogenesis.

Direct and highly productive conversion of cyanobacteria Arthrospira platensis to ethanol with CaCl2 addition

BACKGROUND

The cyanobacterium Arthrospira platensis shows promise as a carbohydrate feedstock for biofuel production. The glycogen accumulated in A. platensis can be extracted by lysozyme-degrading the peptidoglycan layer of the bacterial cell walls. The extracted glycogen can be converted to ethanol through hydrolysis by amylolytic enzymes and fermentation by the yeast Saccharomyces cerevisiae. Thus, in the presence of lysozyme, a recombinant yeast expressing α-amylase and glucoamylase can convert A. platensis directly to ethanol, which would simplify the procedure for ethanol production. However, the ethanol titer and productivity in this process are lower than in ethanol production from cyanobacteria and green algae in previous reports.

RESULTS

To increase the ethanol titer, a high concentration of A. platensis biomass was employed as the carbon source for the ethanol production using a recombinant amylase-expressing yeast. The addition of lysozyme to the fermentation medium increased the ethanol titer, but not the ethanol productivity. The addition of CaCl₂ increased both the ethanol titer and productivity by causing the delamination of polysaccharide layer on the cell surface of A. platensis. In the presence of lysozyme and CaCl₂, ethanol titer, yield, and productivity improved to 48 g L^-1, 93% of theoretical yield, and 1.0 g L^-1 h^-1 from A. platensis, corresponding to 90 g L^-1 of glycogen.

CONCLUSIONS

We developed an ethanol conversion process using a recombinant amylase-expressing yeast from A. platensis with a high titer, yield, and productivity by adding both lysozyme and CaCl₂. The direct and highly productive conversion process from A. platensis via yeast fermentation could be applied to multiple industrial bulk chemicals.

Cation-containing lipid membranes – experiment and md simulations

Using small angle neutron diffraction and molecular dynamics simulations we studied the interactions between calcium (Ca2+) or zinc (Zn2+) cations, and oriented gel phase dipalmitoyl-phosphatidylcholine (DPPC) bilayers. For both cations studied at ~1:7 divalent metal ion to lipid molar ratio (Me2+:DPPC), bilayer thickness increased. Simulation results helped reveal subtle differences in the effects of the two cations on gel phase membranes.

Bacterial lipopolysaccharides form physically cross-linked, two-dimensional gels in the presence of divalent cations

We established a bacterial membrane model with monolayers of bacterial lipopolysaccharides (LPS Re and LPS Ra) and quantified their viscoelastic properties by using an interfacial stress rheometer coupled to a Langmuir film balance. LPS Re monolayers exhibited purely viscous behaviour in the absence of calcium ions, while the same monolayers underwent a viscous-to-elastic transition upon compression in the presence of Ca(2+). Our results demonstrated for the first time that LPSs in bacterial outer membranes can form two-dimensional elastic networks in the presence of Ca(2+). Different from LPS Re monolayers, the LPS Ra monolayers showed a very similar rheological transition both in the presence and absence of Ca(2+), suggesting that longer saccharide chains can form 2D physical gels even in the absence of Ca(2+). By exposure of the monolayers to the antimicrobial peptide protamine, we could directly monitor the differences in resistance of bacterial membranes according to the presence of calcium.

Water and Lipid Bilayers

Water is crucial to the structure and function of biological membranes. In fact, the membrane's basic structural unit, i.e. the lipid bilayer, is self-assembled and stabilized by the so-called hydrophobic effect, whereby lipid molecules unable to hydrogen bond with water aggregate in order to prevent their hydrophobic portions from being exposed to water. However, this is just the beginning of the lipid-bilayer-water relationship. This mutual interaction defines vesicle stability in solution, controls small molecule permeation, and defines the spacing between lamella in multi-lamellar systems, to name a few examples. This chapter will describe the structural and dynamical properties central to these, and other water- lipid bilayer interactions.

Surface-lattice model describes electrostatic interactions of ions and polycations with bacterial lipopolysaccharides: ion valence and polycation's excluded area

The bacterial outer membrane (OM) is compositionally distinct and contains polyanionic lipopolysaccharide (LPS) in the outer layer as a main component. It has long been known that the cation-binding ability of LPS is one of the key determinants of OM permeability. Here we present a two-dimensional lattice model of the outer LPS layer, in which the lattice is decorated with bound ions or polycations; while small ions can occupy single binding sites, polycations, modeled as (charged) rods, compete for binding sites through their area exclusion, a consequence of their multisite binding. Our results suggest that in the parameter space of biological relevance, the effect of area exclusion is well-reflected in the competitive binding of Mg(2+) and polycations onto LPS; by reducing the apparent binding affinity of polycations, it enhances Mg(2+) binding. Despite simplifications, our results are generally consistent with the common view of Mg(2+) as OM-stabilizing and polycations as OM-perturbing agents. They will be useful for understanding how cationic antimicrobials can gain entry into the cytoplasmic membrane. We also outline a few strategies for extending our model toward a more realistic modeling of OM permeability.

Ionic strength and composition govern the elasticity of biological membranes. A study of model DMPC bilayers by force- and transmission IR spectroscopy

Infrared (IR) spectroscopy was used to quantify the ion mixture effect of seawater (SW), particularly the contribution of Mg(2+) and Ca(2+) as dominant divalent cations, on the thermotropic phase behaviour of 1,2-dimyristoyl-sn-glycero-3-posphocholine (DMPC) bilayers. The changed character of the main transition at 24 °C from sharp to gradual in films and the 1 °C shift of the main transition temperature in dispersions reflect the interactions of lipid headgroups with the ions in SW. Force spectroscopy was used to quantify the nanomechanical hardness of a DMPC supported lipid bilayer (SLB). Considering the electrostatic and ion binding equilibrium contributions while systematically probing the SLB in various salt solutions, we showed that ionic strength had a decisive influence on its nanomechanics. The mechanical hardness of DMPC SLBs in the liquid crystalline phase linearly increases with the increasing fraction of all ion-bound lipids in a series of monovalent salt solutions. It also linearly increases in the gel phase but almost three times faster (the corresponding slopes are 4.9 nN/100 mM and 13.32 nN/100 mM, respectively). We also showed that in the presence of divalent ions (Ca(2+) and Mg(2+)) the bilayer mechanical hardness was unproportionally increased, and that was accompanied with the decrease of Na(+) ion and increase of Cl(-) ion bound lipids. The underlying process is a cooperative and competitive ion binding in both the gel and the liquid crystalline phase. Bilayer hardness thus turned out to be very sensitive to ionic strength as well as to ionic composition of the surrounding medium. In particular, the indicated correlation helped us to emphasize the colligative properties of SW as a naturally occurring complex ion mixture.

Electrostatic modification of the lipopolysaccharide layer: competing effects of divalent cations and polycationic or polyanionic molecules

The outer membrane (OM) of Gram-negative bacteria is asymmetrical with its outer layer mainly populated with polyanionic lipopolysaccharide (LPS). Much empirical evidence shows how OM permeability can be altered electrostatically: if Mg(2+) or divalent cations are required for the integrity of the OM, antimicrobial peptides (AMPs) or ethylene-diaminetetraacetic acid (EDTA) can permeabilize it. Using a coarse-grained model of the outer LPS layer, in which the layer is viewed as forming discrete binding sites for opposite charges, we study how the LPS layer can be modified electrostatically. In particular, we capture systematically ion-pairing and lateral-charge correlations on the LPS layer. Our results offer a clear picture of (competitive) ion binding onto the LPS layer and its impact on the lateral packing of LPS molecules, similarly to what has been seen in experiments: divalent cations such as Mg(2+) not only neutralize the LPS layer but also make its planar charge distribution heterogeneous, thus tightening the LPS layer; on the other hand, polycationic AMPs or polyanionic EDTA can displace Mg(2+) ions from the LPS layer and counteract the favorable effect of Mg(2+). Our result will be useful for clarifying to what extent OM permeability can be modified electrostatically.

Life at the border: adaptation of proteins to anisotropic membrane environment

This review discusses main features of transmembrane (TM) proteins which distinguish them from water-soluble proteins and allow their adaptation to the anisotropic membrane environment. We overview the structural limitations on membrane protein architecture, spatial arrangement of proteins in membranes and their intrinsic hydrophobic thickness, co-translational and post-translational folding and insertion into lipid bilayers, topogenesis, high propensity to form oligomers, and large-scale conformational transitions during membrane insertion and transport function. Special attention is paid to the polarity of TM protein surfaces described by profiles of dipolarity/polarizability and hydrogen-bonding capacity parameters that match polarity of the lipid environment. Analysis of distributions of Trp resides on surfaces of TM proteins from different biological membranes indicates that interfacial membrane regions with preferential accumulation of Trp indole rings correspond to the outer part of the lipid acyl chain region-between double bonds and carbonyl groups of lipids. These "midpolar" regions are not always symmetric in proteins from natural membranes. We also examined the hydrophobic effect that drives insertion of proteins into lipid bilayer and different free energy contributions to TM protein stability, including attractive van der Waals forces and hydrogen bonds, side-chain conformational entropy, the hydrophobic mismatch, membrane deformations, and specific protein-lipid binding.

Lipopolysaccharide-induced dynamic lipid membrane reorganization: tubules, perforations, and stacks

Lipopolysaccharide (LPS) is a unique lipoglycan, with two major physiological roles: 1), as a major structural component of the outer membrane of Gram-negative bacteria and 2), as a highly potent mammalian toxin when released from cells into solution (endotoxin). LPS is an amphiphile that spontaneously inserts into the outer leaflet of lipid bilayers to bury its hydrophobic lipidic domain, leaving the hydrophilic polysaccharide chain exposed to the exterior polar solvent. Divalent cations have long been known to neutralize and stabilize LPS in the outer membrane, whereas LPS in the presence of monovalent cations forms highly mobile negatively-charged aggregates. Yet, much of our understanding of LPS and its interactions with the cell membrane does not take into account its amphiphilic biochemistry and charge polarization. Herein, we report fluorescence microscopy and atomic force microscopy analysis of the interaction between LPS and fluid-phase supported lipid bilayer assemblies (sLBAs), as model membranes. Depending on cation availability, LPS induces three remarkably different effects on simple sLBAs. Net-negative LPS-Na(+) leads to the formation of 100-μm-long flexible lipid tubules from surface-associated lipid vesicles and the destabilization of the sLBA resulting in micron-size hole formation. Neutral LPS-Ca(2+) gives rise to 100-μm-wide single- or multilamellar planar sheets of lipid and LPS formed from surface-associated lipid vesicles. Our findings have important implications about the physical interactions between LPS and lipids and demonstrate that sLBAs can be useful platforms to study the interactions of amphiphilic virulence factors with cell membranes. Additionally, our study supports the general phenomenon that lipids with highly charged or bulky headgroups can promote highly curved membrane architectures due to electrostatic and/or steric repulsions.

E. coli outer membrane and interactions with OmpLA

The outer membrane of Gram-negative bacteria is a unique asymmetric lipid bilayer composed of phospholipids (PLs) in the inner leaflet and lipopolysaccharides (LPSs) in the outer leaflet. Its function as a selective barrier is crucial for the survival of bacteria in many distinct environments, and it also renders Gram-negative bacteria more resistant to antibiotics than their Gram-positive counterparts. Here, we report the structural properties of a model of the Escherichia coli outer membrane and its interaction with outer membrane phospholipase A (OmpLA) utilizing molecular dynamics simulations. Our results reveal that given the lipid composition used here, the hydrophobic thickness of the outer membrane is ∼3 Å thinner than the corresponding PL bilayer, mainly because of the thinner LPS leaflet. Further thinning in the vicinity of OmpLA is observed due to hydrophobic matching. The particular shape of the OmpLA barrel induces various interactions between LPS and PL leaflets, resulting in asymmetric thinning around the protein. The interaction between OmpLA extracellular loops and LPS (headgroups and core oligosaccharides) stabilizes the loop conformation with reduced dynamics, which leads to secondary structure variation and loop displacement compared to that in a DLPC bilayer. In addition, we demonstrate that the LPS/PL ratios in asymmetric bilayers can be reliably estimated by the per-lipid surface area of each lipid type, and there is no statistical difference in the overall membrane structure for the outer membranes with one more or less LPS in the outer leaflet, although individual lipid properties vary slightly.

Molecular dynamics and NMR spectroscopy studies of E. coli lipopolysaccharide structure and dynamics

Lipopolysaccharide (LPS), a component of Gram-negative bacterial outer membranes, comprises three regions: lipid A, core oligosaccharide, and O-antigen polysaccharide. Using the CHARMM36 lipid and carbohydrate force fields, we have constructed a model of an Escherichia coli R1 (core) O6 (antigen) LPS molecule. Several all-atom bilayers are built and simulated with lipid A only (LIPA) and varying lengths of 0 (LPS0), 5 (LPS5), and 10 (LPS10) O6 antigen repeating units; a single unit of O6 antigen contains five sugar residues. From (1)H,(1)H-NOESY experiments, cross-relaxation rates are obtained from an O-antigen polysaccharide sample. Although some experimental deviations are due to spin-diffusion, the remaining effective proton-proton distances show generally very good agreement between NMR experiments and molecular dynamics simulations. The simulation results show that increasing the LPS molecular length has an impact on LPS structure and dynamics and also on LPS bilayer properties. Terminal residues in a LPS bilayer are more flexible and extended along the membrane normal. As the core and O-antigen are added, per-lipid area increases and lipid bilayer order decreases. In addition, results from mixed LPS0/5 and LPS0/10 bilayer simulations show that the LPS O-antigen conformations at a higher concentration of LPS5 and LPS10 are more orthogonal to the membrane and less flexible. The O-antigen concentration of mixed LPS bilayers does not have a significant effect on per-lipid area and hydrophobic thickness. Analysis of ion and water penetration shows that water molecules can penetrate inside the inner core region, and hydration is critical to maintain the integrity of the bilayer structure.

Evaluation of engineered nanoparticle toxic effect on wastewater microorganisms: current status and challenges

The use of engineered nanoparticles (ENPs) in a wide range of products is associated with an increased concern for environmental safety due to their potential toxicological and adverse effects. ENPs exert antimicrobial properties through different mechanisms such as the formation of reactive oxygen species, disruption of physiological and metabolic processes. Although there are little empirical evidences on environmental fate and transport of ENPs, biosolids in wastewater most likely would be a sink for ENPs. However, there are still many uncertainties in relation to ENPs impact on the biological processes during wastewater treatment. This review provides an overview of the available data on the plausible effects of ENPs on AS and AD processes, two key biologically relevant environments for understanding ENPs-microbial interactions. It indicates that the impact of ENPs is not fully understood and few evidences suggest that ENPs could augment microbial-mediated processes such as AS and AD. Further to this, wastewater components can enhance or attenuate ENPs effects. Meanwhile it is still difficult to determine effective doses and establish toxicological guidelines, which is in part due to variable wastewater composition and inadequacy of current analytical procedures. Challenges associated with toxicity evaluation and data interpretation highlight areas in need for further research studies.

Structural adaptations of proteins to different biological membranes

To gain insight into adaptations of proteins to their membranes, intrinsic hydrophobic thicknesses, distributions of different chemical groups and profiles of hydrogen-bonding capacities (α and β) and the dipolarity/polarizability parameter (π*) were calculated for lipid-facing surfaces of 460 integral α-helical, β-barrel and peripheral proteins from eight types of biomembranes. For comparison, polarity profiles were also calculated for ten artificial lipid bilayers that have been previously studied by neutron and X-ray scattering. Estimated hydrophobic thicknesses are 30-31Å for proteins from endoplasmic reticulum, thylakoid, and various bacterial plasma membranes, but differ for proteins from outer bacterial, inner mitochondrial and eukaryotic plasma membranes (23.9, 28.6 and 33.5Å, respectively). Protein and lipid polarity parameters abruptly change in the lipid carbonyl zone that matches the calculated hydrophobic boundaries. Maxima of positively charged protein groups correspond to the location of lipid phosphates at 20-22Å distances from the membrane center. Locations of Tyr atoms coincide with hydrophobic boundaries, while distributions maxima of Trp rings are shifted by 3-4Å toward the membrane center. Distributions of Trp atoms indicate the presence of two 5-8Å-wide midpolar regions with intermediate π* values within the hydrocarbon core, whose size and symmetry depend on the lipid composition of membrane leaflets. Midpolar regions are especially asymmetric in outer bacterial membranes and cell membranes of mesophilic but not hyperthermophilic archaebacteria, indicating the larger width of the central nonpolar region in the later case. In artificial lipid bilayers, midpolar regions are observed up to the level of acyl chain double bonds.