Influence of water on diffusion in imidazolium-based ionic liquids: a pulsed field gradient NMR study

Evaluating the contributions to conductivity in room temperature ionic liquids

The conductivity of room temperature ionic liquids is not described adequately by the Nernst-Einstein equation, which accounts only for Brownian motion of the ions. We report on the conductivity of the ionic liquid 1-butyl-3-methylimidazolum bis(trifluoromethylsulfonyl) imide (BMIM TFSI), comparing the known conductivity of this RTIL to the diffusion constants of the cationic and anionic species over a range of length scales, using time-resolved fluorescence depolarization and fluorescence recovery after photobleaching (FRAP) measurements of chromophores in the RTIL. Our data demonstrate that the diffusional contribution to molar conductivity is ca. 50%. Another mechanism for the transmission of charged species in RTILs is responsible for the "excess" molar conductivity, and we consider possible contributions.

Do Electrostatics Control the Diffusive Dynamics of Solitary Water? NMR and MD Studies of Water Translation and Rotation in Dipolar and Ionic Solvents

NMR-based measurements of the diffusion coefficients and rotation times of solitary water and benzene at 300 K are reported in a diverse collection of 13 conventional organic solvents and 10 imidazolium ionic liquids. Proton chemical shifts of water are found to be correlated to water OH-stretching frequencies, confirming the importance of electrostatic interactions in these shifts. However, the influence of magnetic interactions in aromatic solvents renders chemical shifts a less reliable indicator of electrostatics. Diffusion coefficients (DB) and rotational correlation times (τB) of benzene in the solvents examined are accurately described as functions of viscosity (η) by DB ∝ η-0.81 and τB ∝ η0.64. Literature values of DB and τB in alkane and normal alcohols, which were not included among the solvents studied here, are systematically faster than predicted by these correlations, indicating that factors beyond solvent viscosity play a role in determining the friction on benzene. In contrast to benzene, water diffusion and rotation are poorly described in terms of viscosity alone, even in the dipolar and ionic solvents measured here. The present data and the substantial literature data already available on dilute water diffusion show a systematic dependence of DW on solvent polarity among isoviscous solvents. The aspect of solvent polarity most relevant to water dynamics is the ability of a solvent to accept hydrogen bonds from water, as conveniently quantified by the frequency of water's OH stretching band, ΔνOH. The friction on translation, ζtr = kBT/DW, and rotation, ζrot = kBTτW, are both well correlated by functions of the form ζ(η, ΔνOH) = a1ηa2 exp (a3ΔνOH), where the ai are adjustable parameters. Molecular dynamics simulations reveal a strong coupling between electrostatic and nonelectrostatic water-solvent interactions, which makes it impossible to dissect the friction on water into additive dielectric and hydrodynamic components. Simulations also provide a tentative explanation for the unusual form of the correlating function ζ(η, ΔνOH), at least in the case of ζrot.

Insights into the Structure and Dynamics of Imidazolium Ionic Liquid and Tetraethylene Glycol Dimethyl Ether Cosolvent Mixtures: A Molecular Dynamics Approach

In this work, the effect of molecular cosolvents tetraethylene glycol dimethyl ether (TEGDME) on the structure and versatile nature of mixtures of these compounds with imidazolium-based ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) is analyzed and discussed at a molecular level by means of all-atom molecular dynamics (MD) simulations. In the whole concentration range of the binary mixtures, the structures and properties evolution was studied by means of systematic molecular dynamics simulations of the fraction of hydrogen bonds, the radial and spatial distribution functions for the various molecular ions and molecular species in the system, together with the snapshots visualization of equilibrated simulation boxes with a color-coding scheme and the rotational dynamics of coumarin 153 (C153) in the binary mixtures. The goal of the work is to provide a molecular-level understanding of significant improvement of ionic conductivity and self-diffusion with the presence of TEGDME as a cosolvent, which causes an enhancement to the ion translational motion and fluidity in the [bmim][PF₆] ionic liquids (ILs). Under a mixture concentration change, the microstructure changes of [bmim][PF₆] with the TEGDME molar fraction (X_TEG) above 0.50 show a slight difference from that of neat [bmim][PF₆] IL and concentrated [bmim][PF₆]/TEGDME mixture in terms of the radial and spatial distribution functions. The relative diffusivities of solvent molecules to cations as a function of concentration were found to depend on the solvent but not on the anion. A TEGDME increase is found to be advantageous to the dissipation of the polar regions as well as the nonpolar regions in the [bmim][PF₆] ionic liquids. These conclusions are consistent with the experimental results, which verified that the unique, complex, and versatile nature of [bmim][PF₆]/TEGDME mixture can be correctly modeled and discussed at a molecular level using MD simulation data.

Influence of Alkyl Chain Length on Thermal Properties, Structure, and Self-Diffusion Coefficients of Alkyltriethylammonium-Based Ionic Liquids

The application of ionic liquids (ILs) has grown enormously, from their use as simple solvents, catalysts, media in separation science, or electrolytes to that as task-specific, tunable molecular machines with appropriate properties. A thorough understanding of these properties and structure-property relationships is needed to fully exploit their potential, open new directions in IL-based research and, finally, properly implement the appropriate applications. In this work, we investigated the structure-properties relationships of a series of alkyltriethylammonium bis(trifluoromethanesulfonyl)imide [TEA-R][TFSI] ionic liquids in relation to their thermal behavior, structure organization, and self-diffusion coefficients in the bulk state using DSC, FT-IR, SAXS, and NMR diffusometry techniques. The phase transition temperatures were determined, indicating alkyl chain dependency. Fourier-transformed infrared spectroscopy studies revealed the structuration of the ionic liquids along with alkyl chain elongation. SAXS experiments clearly demonstrated the existence of polar/non-polar domains. The alkyl chain length influenced the expansion of the non-polar domains, leading to the expansion between cation heads in polar regions of the structured IL. 1H NMR self-diffusion coefficients indicated that alkyl chain elongation generally caused the lowering of the self-diffusion coefficients. Moreover, we show that the diffusion of anions and cations of ILs is similar, even though they vary in their size.

Hydrogen Bonding Strength Determines Water Diffusivity in Polymer Ionogels

Polymeric ionogels, cross-linked gels swollen by ionic liquids (ILs), are useful vehicles for the release and storage of molecular solutes in separation, delivery, and other applications. Although rapid solute diffusion is often critical for performance, it remains challenging to predict diffusivities across multidimensional composition spaces. Recently, we showed that water (a neutral solute) diffuses through alkyl-methylimidazolium halide ILs by hopping between hydrogen bonding sites on relatively immobile cations. Here, we expand on this activated hopping mechanism in two significant ways. First, we demonstrate that water diffuses through poly(ethylene glycol)diacrylate ionogels via the same mechanism at a reduced rate. Second, we hypothesize that the activation energy barrier can be determined from relatively simple ¹H NMR chemical shift measurements of the proton responsible for H-bonding. This relationship enables water's diffusivity in ionogels of this class to be predicted quantitatively, requiring only (1) the composition-dependent diffusivity and Arrhenius behavior of a single IL and (2) ¹H NMR spectra of the ionogels of interest. High-throughput microfluidic Fabry-Perot interferometry measurements verify prediction accuracy across a broad formulation space (four ILs, 0 ≤ x_H2O ≤ 0.7, 0 ≤ ϕ_PEGDA ≤ 0.66). The predictive model may expedite IL-material screening; moreover, it intimates a powerful connection between solute mobility and hydrogen bonding and suggests targets for rational design.

Insights into the translational and rotational dynamics of cations and anions in protic ionic liquids by means of NMR fast-field-cycling relaxometry

Understanding the translational and rotational dynamics of cations and anions in hydrogen bonded protic ionic liquids (PIls) is still a challenge. In this study, we determine self-diffusion coefficients and rotational correlation times of both ions in triethylammonium based PILs by means of NMR Fast-Field-Cycling (FFC) relaxometry. Global fits of 1H and 19F nuclear magnetic relaxation dispersion (NMRD) curves allowed proper separation into intra and inter molecular relaxation rates for both NMR sensitive nuclei and thus a reliable description of translational and rotational motion for both ions individually. The diffusion coefficients of the cations are in the order of 6 × 10-11 m2 s-1 at room temperature and about 50 per cent larger than those of the anions. The diffusion coefficients of cations and anions in both PILs were compared with those we derived from applying an universal dispersion power law and those known from pulsed field gradient (PFG) NMR studies. Considering the Nernst-Einstein equation, molar conductivities were calculated from cationic and anionic diffusion coefficients and related to directly measured molar conductivities, allowing the determination of the degree of dissociation. The rotational correlation times τR ranging from 50 ps up to 2 ns as a function of temperature were compared with those obtained from high-field NMR quadrupolar relaxation time measurements addressing explicitly the rotation of the NH vector and giving insights into the acidic proton mobility. The Stokes-Einstein and Stokes-Einstein-Debye relations were applied to relate the diffusion coefficients and rotational correlation times to the macroscopic bulk viscosity. The results were also discussed with respect to the archetypical PIL ethylammonium nitrate.

Ion Dissociation in Ionic Liquids and Ionic Liquid Solutions

The extent to which cations and anions in ionic liquids (ILs) and ionic liquid solutions are dissociated is of both fundamental scientific interest and practical importance because ion dissociation has been shown to impact viscosity, density, surface tension, volatility, solubility, chemical reactivity, and many other important chemical and physical properties. When mixed with solvents, ionic liquids provide the unique opportunity to investigate ion dissociation from infinite dilution in the solvent to a completely solvent-free state, even at ambient conditions. The most common way to estimate ion dissociation in ILs and IL solutions is by comparing the molar conductivity determined from ionic conductivity measurements such as electrochemical impedance spectroscopy (EIS) (which measure the movement of only the charged, i.e., dissociated, ions) with the molar conductivity calculated from ion diffusivities measured by pulse field gradient nuclear magnetic resonance spectroscopy (PFG-NMR, which gives movement of all of the ions). Because the NMR measurements are time-consuming, the number of ILs and IL solutions investigated by this method is relatively limited. We have shown that use of the Stokes-Einstein equation with estimates of the effective ion Stokes radii allows ion dissociation to be calculated from easily measured density, viscosity, and ionic conductivity data (ρ, η, λ), which is readily available in the literature for a much larger number of pure ILs and IL solutions. Therefore, in this review, we present values of ion dissociation for ILs and IL solutions (aqueous and nonaqueous) determined by both the traditional molar conductivity/PFG-NMR method and the ρ, η, λ method. We explore the effect of cation and anion alkyl chain length, structure, and interaction motifs of the cation and anion, temperature, and the strength of the solvent in IL solutions.

Effect of Water on Molecular and Transport Phenomena Behaviors of [Bmim][Ac]/Water/CO2, Using Molecular Dynamics Strategy

Mixing ionic liquids (ILs) with water proposes an effective way of designing IL solutions with engineered properties that have applications in various processes/industries. Understanding molecular interactions of ILs, water, and carbon dioxide (CO₂) is of great importance in the selection of ILs with high selectivity and solubility for CO₂ capture application. We perform molecular dynamics simulations to investigate the effects of water concentration on excess energy, molecular distribution, and dynamic behaviors of mixtures of 1-butyl-3-methylimidazolium acetate ([Bmim][Ac]), water (W), and CO₂ at different water concentrations. The results of this study include radial distribution functions, coordination numbers, water cluster size distribution, hydrogen bonding, and diffusivity coefficients in IL/W and CO₂/IL/W systems, using [Bmim][Ac] as the IL, at various process conditions. Analysis of the water clusters in the IL/W system reveals that the water clusters are connected mainly through hydrogen bonds. The presence of water in the IL solutions increases the diffusivity of cations, anions, water, and CO₂ molecules in the mixture because of the reduced viscosity of the solution and the hydrophilicity of [Bmim][Ac]. This study highlights the effect of water (as an additive to IL) on key parameters such as diffusion coefficient and cluster formation in optimal design and operation of carbon capture processes.

Thermodynamic and Transport Properties of Tetrabutylphosphonium Hydroxide and Tetrabutylphosphonium Chloride-Water Mixtures via Molecular Dynamics Simulation

Thermodynamic, structural, and transport properties of tetrabutylphosphonium hydroxide (TBPH) and tetrabutylphosphonium chloride (TBPCl)–water mixtures have been investigated using all-atom molecular dynamics simulations in response to recent experimental work showing the TBPH–water mixtures capability as a cellulose solvent. Multiple transitional states exist for the water—ionic liquid (IL) mixture between 70 and 100 mol% water, which corresponds to a significant increase in water hydrogen bonds. The key transitional region, from 85 to 92.5 mol% water, which coincides with the mixture’s maximum cellulose solubility, reveals small and distinct water veins with cage structures formed by the TBP⁺ ions, while the hydroxide and chloride ions have moved away from the P atom of TBP⁺ and are strongly hydrogen bonded to the water. The maximum cellulose solubility of the TBPH–water solution at approximately 91.1 mol% water, appears correlated with the destruction of the TBP’s interlocking structure in the simulations, allowing the formation of water veins and channeling structures throughout the system, as well as changing from a subdiffusive to a near-normal diffusive regime, increasing the probability of the IL’s interaction with the cellulose polymer. A comparison is made between the solution properties of TBPH and TBPCl with those of alkylimidazolium-based ILs, for which water appears to act as anti-solvent rather than a co-solvent.

Dealing with supramolecular structure for ionic liquids: a DOSY NMR approach

Diffusion-ordered spectroscopy (DOSY) is a powerful method for the NMR analysis of ionic liquids. Thus the dynamic-structural behaviour of imidazolium ionic liquids has been investigated by measurements of direct ¹H diffusion coefficients in different solvents.

Colorimetric Humidity Sensor Using Inverse Opal Photonic Gel in Hydrophilic Ionic Liquid

We demonstrate a fast response colorimetric humidity sensor using a crosslinked poly(2-hydroxyethyl methacrylate) (PHEMA) in the form of inverse opal photonic gel (IOPG) soaked in 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM⁺][BF₄−]), a non-volatile hydrophilic room temperature ionic liquid (IL). An evaporative colloidal assembly enabled the fabrication of highly crystalline opal template, and a subsequent photopolymerization of PHEMA followed by solvent-etching and final soaking in IL produced a humidity-responsive IOPG showing highly reflective structural color by Bragg diffraction. Three IOPG sensors with different crosslinking density were fabricated on a single chip, where a lightly crosslinked IOPG exhibited the color change response over entire visible spectrum with respect to the humidity changes from 0 to 80% RH. As the water content increased in IL, thermodynamic interactions between PHEMA and [BMIM⁺][BF₄−] became more favorable, to show a red-shifted structural color owing to a longitudinal swelling of IOPG. Highly porous IO structure enabled fast humidity-sensing kinetics with the response times of ~1 min for both swelling and deswelling. Temperature-dependent swelling of PHEMA in [BMIM⁺][BF₄−] revealed that the current system follows an upper critical solution temperature (UCST) behavior with the diffraction wavelength change as small as 1% at the temperature changes from 10 °C to 30 °C.

A review of NMR methods used in the study of the structure and dynamics of ionic liquids

Recently, NMR spectroscopy has been emerging out as a powerful tool to study the structure and dynamics of ionic liquids (ILs) and ILs-Li⁺ salt mixtures. This mini-review primarily focuses on the applications of various NMR spectroscopic techniques such as self-diffusion measurements, NMR relaxometry, two-dimensional NMR, and other novel NMR approaches to study the structure and dynamics of ILs and its mixtures with lithium salts. Copyright © 2017 John Wiley & Sons, Ltd.

Transport Matters: Boosting CO2 Electroreduction in Mixtures of [BMIm][BF4 ]/Water by Enhanced Diffusion

Room-temperature ionic liquids (RTILs) are promising new electrolytes for efficient carbon dioxide reduction. However, due to their high viscosity, the mass transport of CO₂ in RTILs is typically slow, at least one order of magnitude slower than in aqueous systems. One possibility to improve mass transport in RTILs is to decrease their viscosity through dilution with water. Herein, defined amounts of water are added to 1-butyl-3methylimidazolium tetrafluoroborate ([BMIm][BF₄ ]), which is a hydrophilic RTIL. Electrochemical measurements on quiescent and hydrodynamic systems both indicate enhanced CO₂ electroreduction. This enhancement has its origin in thermodynamic/kinetic effects (the addition of water increases the availability of H⁺ , which is a reaction partner of CO₂ electroreduction) and in an increased rate of transport due to lower viscosity. Electrochemically determined diffusion coefficients for CO₂ in [BMIm][BF₄ ]/water systems agree well with values determined by NMR spectroscopy.

From Nanoscale to Microscale: Crossover in the Diffusion Dynamics within Two Pyrrolidinium-Based Ionic Liquids

Knowledge of the ion motion in room temperature ionic liquids (RTILs) is critical for their applications in a number of fields, from lithium batteries to dye-sensitized solar cells. Experiments on a limited number of RTILs have shown that on macroscopic time scales the ions typically undergo conventional, Gaussian diffusion. On shorter time scales, however, non-Gaussian behavior has been observed, similar to supercooled fluids, concentrated colloidal suspensions, and more complex systems. Here we characterize the diffusive motion of ionic liquids based on the N-butyl-N-methylpyrrolidinium (PYR₁₄) cation and bis(trifluoro methanesulfonyl)imide (TFSI) or bis(fluorosulfonyl)imide (FSI) anions. A combination of pulsed gradient spin-echo (PGSE) NMR experiments and molecular dynamics (MD) simulations demonstrates a crossover from subdiffusive behavior to conventional Gaussian diffusion at ∼10 ns. The deconvolution of molecular displacements into a continuous spectrum of diffusivities shows that the short-time behavior is related to the effects of molecular caging. For PYR₁₄FSI, we identify the change of short-range ion-counterion associations as one possible mechanism triggering long-range displacements.

The properties of residual water molecules in ionic liquids: a comparison between direct and inverse Kirkwood–Buff approaches

Atomistic molecular dynamics simulations of aqueous ionic liquid mixtures were performed in order to compare the resulting Kirkwood–Buff integrals with experimental data and the corresponding integrals derived by an inverse Kirkwood–Buff approach.

In silico insights into the solvation characteristics of the ionic liquid 1-methyltriethoxy-3-ethylimidazolium acetate for cellulosic biomass

Lignocellulosic biomass is a domestically grown, sustainable, and potentially carbon-neutral feedstock for the production of liquid fuels and other value added chemicals. This underutilized renewable feedstock has the potential to alleviate some of the current socio-economic dependence on foreign petroleum supplies while stimulating rural economies. Unfortunately, the potential of biomass has largely been underdeveloped due to the recalcitrant nature of lignocellulosic materials. Task-specific ionic liquids (ILs) have shown considerable promise as an alternative non-aqueous solvent for solvation and deconstruction of lignocellulose in the presence of metal chloride catalyst or enzymes. Recently it has been hypothesized that adding oxygen atoms to the tail of an imidazolium cation would alleviate some of the negative characteristics of the ILs by increasing mass transport properties, and decreasing IL deactivation of enzymes, while at the same time retaining favorable solvation characteristics for lignocellulose. Reported here are fully atomistic molecular dynamic simulations of 1-methyltriethoxy-3-ethylimidazolium acetate ([Me-(OEt)3-Et-IM(+)] [OAc(-)]) that elucidate promising molecular-level details pertaining to the solvation characteristics of model compounds of cellulose, and IL-induced side-chain and ring puckering conformations. It is found that the anion interactions with the saccharide induce alternate ring puckering conformations from those seen in aqueous environments (i.e.(1)C4), while the cation interactions are found to influence the conformation of the ω dihedral. These perturbations in saccharide structures are discussed in the context of their contribution to the disruption of hydrogen bonding in cellulosic architecture and their role in solvation.

Effect of water presence on choline chloride-2urea ionic liquid and coating platings from the hydrated ionic liquid

In the present study, hygroscopicity of the choline chloride-urea (ChCl-2Urea) ionic liquid (IL) was confirmed through Karl-Fisher titration examination, indicating that the water content in the hydrated ChCl-2Urea IL was exposure-time dependent and could be tailored by simple heating treatment. The impact of the absorbed water on the properties of ChCl-2Urea IL, including viscosity, electrical conductivity, electrochemical window and chemical structure was investigated. The results show that water was able to dramatically reduce the viscosity and improve the conductivity, however, a broad electrochemical window could be persisted when the water content was below ~6 wt.%. These characteristics were beneficial for producing dense and compact coatings. Nickel (Ni) coatings plating from hydrated ChCl-2Urea IL, which was selected as an example to show the effect of water on the electroplating, displayed that a compact and corrosion-resistant Ni coating was plated from ChCl-2Urea IL containing 6 wt.% water doped with 400 mg/L NA at a moderate temperature. As verified by FTIR analysis, the intrinsic reason could be ascribed that water was likely linked with urea through strong hydrogen bond so that the water decomposition was suppressed during plating. Present study may provide a reference to prepare some similar water-stable ILs for plating.

Effect of water on the transport properties of protic and aprotic imidazolium ionic liquids - an analysis of self-diffusivity, conductivity, and proton exchange mechanism

In this paper we report on the transport properties of protic and aprotic ionic liquids of the imidazolium cation (C2C1Im(+) or C2HIm(+)) and the TFSI(-) or TfO(-) anion as a function of added water. We observe that the self-diffusion coefficient of the ionic species increases upon addition of water, and that the cation diffuses faster than the anion in the entire water concentration range investigated. We also observe that the overall increase of anionic and cationic diffusion coefficients is significant for C2HImTfO while it is rather weak for C2C1ImTFSI, the former being more hydrophilic. Moreover, the difference between cationic and anionic self-diffusivity specifically depends on the structure of the ionic liquid's ions. The degree of ion-ion association has been investigated by comparing the molar conductivity obtained by impedance measurements with the molar conductivity calculated from NMR data using the Nernst-Einstein equation. Our data indicate that the ions are partly dissociated (Λimp/ΛNMR in the range 0.45-0.75) but also that the degree of association decreases in the order C2HImTfO > C2HImTFSI ≈ C2C1ImTfO > C2C1ImTFSI. From these results, it seems that water finds different sites of interaction in the protic and aprotic ionic liquids, with a strong preference for hydrogen bonding to the -NH group (when available) and a stronger affinity to the TfO anion as compared to the TFSI. For the protic ionic liquids, the analysis of (1)H NMR chemical shifts (upon addition of H2O and D2O, respectively) indicates a water-cation interaction of hydrogen bonding nature. In addition, we could probe proton exchange between the -NH group and deuterated water for the protic cation, which occurs at a significantly faster rate if associated with the TfO anion as compared to the TFSI.

Effect of water on the local structure and phase behavior of imidazolium-based protic ionic liquids

We report on the effect of water on local structure and phase behavior of two protic ionic liquids, C2HImTFSI and C2HImTfO. Raman and infrared spectroscopy are employed to investigate the local coordination state. We find that water interacts weakly with TFSI(-) while more specifically with TfO(-) through the -SO3 group. Additionally, we observe that upon addition of water the -NH stretching frequency does not change in C2HImTFSI, while it red-shifts in C2HImTfO, indicative of different hydrogen bonding configurations. Supported by the appearance of some additional features in the 800-1000 cm(-1) frequency range where ring out-of-plane bending (γ) modes are found, we hypothesize that in C2HImTFSI water interacts only with the cation coordinating to the ring C(2)H and the N(3)H sites, while it interacts with both cation and anion in C2HImTfO forming hydrogen bonds that involve the cationic N-H site as well as the anionic -SO3 group. These different local structures also reflect in the phase behavior investigated by DSC, which reveals a more homogeneous solution when water is added to C2HImTfO, as compared to H2O/C2HImTFSI mixtures. Finally we report that the addition of water also significantly affects both Tm and Tg.

The Influence of Water and Metal Salt on the Transport and Structural Properties of 1-Octyl-3-methylimidazolium Chloride

The addition of diluents to ionic liquids (ILs) has recently been shown to enhance the transport properties of ILs. In the context of electrolyte design, this enhancement allows the realisation of IL-based electrolytes for metal–air batteries and other storage devices. It is likely that diluent addition not only impacts the viscosity of the IL, but also the ion–ion interactions and structure. Here, we investigate the nano-structured 1-methyl-3-octylimidazolium chloride (OMImCl) with varying water concentrations in the presence of two metal salts, zinc chloride and magnesium chloride. We find that the choice of metal salt has a significant impact on the structure and transport properties of the system; this is explained by the water structuring and destructing properties of the metal salt.

Water in ionic liquids at electrified interfaces: the anatomy of electrosorption

Complete removal of water from room-temperature ionic liquids is nearly impossible. For the electrochemical applications of ionic liquids, how water is distributed in the electrical double layers when the bulk liquids are not perfectly dry can potentially determine whether key advantages of ionic liquids, such as a wide electrochemical window, can be harnessed in practical systems. In this paper, we study the adsorption of water on electrode surfaces in contact with humid, imidazolium-based ionic liquids using molecular dynamics simulations. The results revealed that water molecules tend to accumulate within sub-nanometer distance from charged electrodes. At low amount of water in the bulk, the distributions of ions and of electrostatic potential in the double layer are affected weakly by the presence of water, but the spatial distribution of water molecules is strongly dependent on both. The preferential positions of water molecules in double layers are determined by the balance of several factors: the tendency to follow the positions of the maximal absolute value of the electrical field, the association with their ionic surroundings, and the propensity to settle at positions where more free space is available. The balance between these factors changes with charging the electrode, but the adsorption of water generally increases with voltage. The ion specificity of water electrosorption is manifested in the stronger presence of water near positive electrodes (where anions are the counterions) than near negative electrodes (where cations are counterions). These predictions await experimental verification.

Water Phase Diagram Is Significantly Altered by Imidazolium Ionic Liquid

We report unusually large changes in the boiling temperature, saturated vapor pressure, and structure of the liquid-vapor interface for a range of 1-butyl-3-methyl tetrafluoroborate, [C4C1IM][BF4]-water mixtures. Even modest molar fractions of [C4C1IM][BF4] significantly affect the phase behavior of water, as represented, for instance, by strong negative deviations from Raoult's law, extending far beyond the standard descriptions. The investigation was carried out using classical molecular dynamics employing a specifically refined force field. The changes in the liquid-vapor interface and saturated vapor pressures are discussed at the atomistic resolution. The reported results guide the search for novel scientific and technological applications of ion-molecular systems.

Relationship between Diffusion and Chemical Exchange in Mixtures of Carbon Dioxide and an Amine-Functionalized Ionic Liquid by High Field NMR and Kinetic Monte Carlo Simulations

NMR exchange spectroscopy (EXSY) and NMR diffusion spectroscopy (PFG NMR) were applied in combination with kinetic Monte Carlo (MC) simulations to investigate self-diffusion in a mixture of carbon dioxide and an amine-functionalized ionic liquid under conditions of an exchange of carbon dioxide molecules between the reacted and unreacted states in the mixture. EXSY studies enabled residence times of carbon dioxide molecules to be obtained in the two states, whereas PFG NMR revealed time-dependent effective diffusivities for diffusion times comparable with and larger than the residence times. Analytical treatment of the PFG NMR attenuation curves as well as fitting of the PFG NMR effective diffusivities by KMC simulations enabled determination of diffusivities of carbon dioxide in the reacted and unreacted states. In contrast to carbon dioxide, the ion diffusivities were found to be diffusion time independent.

Diffusion of 1-ethyl-3-methyl-imidazolium acetate in glucose, cellobiose, and cellulose solutions

Solutions of glucose, cellobiose and microcrystalline cellulose in the ionic liquid 1-ethyl-3-methyl-imidazolium ([C2mim][OAc]) have been examined using pulsed-field gradient ¹H NMR. Diffusion coefficients of the cation and anion across the temperature range 20–70 °C have been determined for a range of concentrations (0–15% w/w) of each carbohydrate in [C2mim][OAc]. These systems behave as an “ideal mixture” of free ions and ions that are associated with the carbohydrate molecules. The molar ratio of carbohydrate OH groups to ionic liquid molecules, α, is the key parameter in determining the diffusion coefficients of the ions. Master curves for the diffusion coefficients of cation, anion and their activation energies are generated upon which all our data collapses when plotted against α. Diffusion coefficients are found to follow an Arrhenius type behavior and the difference in translational activation energy between free and associated ions is determined to be 9.3 ± 0.9 kJ/mol.

State of hydrophobic and hydrophilic ionic liquids in aqueous solutions: are the ions fully dissociated?

Molecular dynamics simulations were performed for aqueous solutions of five ionic liquids (ILs): 1-ethyl-3-methylimidazolium ([C2mim]) bis(trifluoromethanesulfonyl) imide ([NTf2]), 1-n-butyl-3-methylimidazolium ([C4mim]) [NTf2], 1-n-hexyl-3-methylimidazolium ([C6mim]) [NTf2], [C2mim] ethylsulfate ([C2H5SO4]), and [C2mim] chloride (Cl) to determine whether the ions of these ILs are associated at relatively high dilutions and whether the association is governed by hydrophobicity/hydrophilicity of the ILs. The adaptive biasing force technique was applied to calculate the potential of mean force (PMF) for each IL ion pair. For all of the ILs, the PMF is characterized by two distinct contact minima in which the ions have different relative conformations. The hydrophobic ILs bearing the anion [NTf2](-) exist predominantly in the associative state; the strength of the association of these ILs increases with increase in the alkyl chain length. The most hydrophilic IL [C2mim] Cl was determined to be almost fully dissociated at the concentration examined in the study. [C2mim] [C2H5SO4] showed hydration behavior that was intermediate between that exhibited by the ILs in which the anion is substituted with either Cl(-) or [NTf2](-) paired with [C2mim](+). Association constants for these ILs were also computed. Radial distribution functions calculated by constraining the ions at the contact minima showed that hydration of the anion plays the dominant role in determining the microscopic behavior of these ILs in aqueous solutions.

Structure, dynamics, and activity of xylanase solvated in binary mixtures of ionic liquid and water

We have discovered that a family 11 xylanase from Trichoderma longibrachiatum maintains significant activity in low concentrations of the ionic liquids (IL) 1-ethyl-3-methyl-imidazolium acetate ([EMIM][OAc]) or 1-ethyl-3-methyl-imidazolium ethyl sulfate ([EMIM][EtSO4]) in water. In order to understand the mechanisms by which the ionic liquids affect the activity of xylanase, we conducted molecular dynamics simulations of the enzyme in various concentrations of the cosolvent. The simulations show that higher concentrations of ionic liquid correlate with less deviation from the starting crystallographic structure. Dynamic motion of the protein is severely dampened by even the lowest tested concentrations of ionic liquid as measured by root-mean-square fluctuation. Principal component analysis shows that the characteristics of the main modes of enzyme motion are greatly affected by the choice of solvent. Cations become kinetically trapped in the binding pocket, allowing them to act as a competitive inhibitor to the natural substrate. Dynamic light scattering and kinetic studies evaluated the stability of the enzyme in the new solvents. These studies indicate that likely factors in the loss of enzyme activity for this xylanase are the dampening of dynamic motion and kinetic trapping of cations in the binding pocket as opposed to the denaturing of the protein.

Theoretical studies of the 1-ethyl-3-methylimidazolium glycine, [EMIM][Gly], ionic liquid – water mixture — I. Prediction of the solvation and structural properties

Gaussian-based HF/MP2 and DFT/B3LYP methods have been explored to study the microsolvation of glycine anion with water, [Gly]–(W)n, and 1-ethyl-3-methylimidazolium glycine ionic liquid (IL) with water, [EMIM][Gly](W)n, n = 1–6 and 12. The water molecules are either isolated or aggregated around [Gly]– and [EMIM][Gly]. Their electronic structures have been calculated clearly to verify the molecular state of H2O and the results were used to compare with experiments. The water effect on the interaction energies and local packing of [EMIM][Gly] is considered. We identified an important factor: the variation of [EMIM][Gly](W)n polarity with the different numbers of H2O. As the amount of H2O increases, the polar network is continuously broken up. The dipole moments are changed to be lowest when the H-bonding ability of [Gly]– is almost saturated. Meanwhile, the nonpolar groups of the cation form an enhanced aggregation. Such observation can provide initial insights for the experimental nanostructural evolution in the IL–water mixtures.