Enhanced Binding and Biosensing of Carbohydrate-Functionalized Monolayers to Target Proteins by Surface Molecular Imprinting

Proteinous Polymeric Shell Decorated Nanocrystals for the Recognition of Immunoglobulin M

This study demonstrates the preparation of photosensitively orientated and crosslinked proteinous polymeric shell having quantum dot based nanocrystals through Amino acid Decorated and Light Underpinning Conjugation Approach (ANADOLUCA). ANADOLUCA is based on photo-electron transfer method and uses these decorated nanocrystals for specifically and effectively recognition and detection of Immunoglobulin M in the aqueous environment. The conjugation method effectively provides an orientation of affinity pairs on the surface of quantum dots nanocrystals. This photosensitive ruthenium-based amino acid monomer is a synthetic and inexpensive material for the preparation of bioconjugates. The nanocrystals give advantages for using a wide pH and temperature range. The construction and preparation method is applicable to silica materials, superparamagnetic particles, quantum dots, carbon nanotubes, Ag/Au nanoparticles, Au surfaces, and polymeric materials. This prepared proteinous polymeric shell decorated nanocrystals are of great potential in applications in life sciences and can be used in infection case studies or allergy symptoms.

Synthesis of Perdeuterated 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine ([D82 ]POPC) and Characterisation of Its Lipid Bilayer Membrane Structure by Neutron Reflectometry

1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), an unsaturated acyl chain containing lipid, is often the predominant lipid in eukaryotic cell membranes in which it is crucial for the fluidity of membranes under physiological conditions. Commercially available, partially deuterated [D₃₁ ]1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine ([D₃₁ ]POPC) does not provide sufficient isotopic contrast for detailed structural studies of multicomponent membranes through neutron techniques. Herein, a relatively straightforward and generic chemical deuteration method is discussed for the asymmetric synthesis of perdeuterated [D₃₁ ]1-palmitoyl-[D₃₃ ]2-oleoyl-sn-[D₅ ]glycero-[D₁₃ ]3-phosphocholine ([D₈₂ ]POPC) that also allows selective deuteration of any of its constituent groups. Neutron reflectivity of a [D₈₂ ]POPC-supported bilayer was used to experimentally determine the neutron scattering length density profile of the lipid. The acyl chains of [D₈₂ ]POPC are closely contrast-matched to heavy water, whereas the very high scattering length density of the deuterated glycerophosphocholine head groups provides good contrast to membrane-binding agents in both deuterated and non-deuterated solvent environments.

Selective adsorption of elastase by surface molecular imprinting materials prepared with novel monomer

A new functional monomer with diol groups was synthesized and applied to fabricate surface molecular imprinting polymers (SMIPs) microspheres for selective adsorption of elastase.

Fibrillar structures formed by covalently bound, short, β-stranded peptides on self-assembled monolayers

The ability to maintain or reproduce biomolecular structures on inorganic substrates has the potential to impact diverse fields such as sensing and molecular electronics, as well as the study of biological self-assembly and structure-function relationships. Because the structure and self-assembly of biomolecules are exquisitely sensitive to their local chemical and electrostatic environment, the goal of reproducing or mimicking biological function in an abiological environment, including at a surface, is challenging. However, simple and well-characterized chemical modifications of prepared surfaces can be used to tune surface chemistry, structure, electrostatics, and reactivity of inorganic materials to facilitate biofunctionalization and function. Here, we describe the covalent attachment of 13-residue β-stranded peptides containing alkyne groups to a flat gold surface functionalized with an azide-terminated self-assembled monolayer through a Huisgen cycloaddition, or "click", reaction. The chemical composition and structural morphology of these surfaces were characterized using X-ray photoelectron spectroscopy, grazing incidence angle reflection-absorption infrared spectroscopy, surface circular dichroism, and atomic force microscopy. The surface-bound β-strands self-assemble into antiparallel β-sheets to form fibrillar structures 24.9 ± 1.6 nm in diameter and 2.83 ± 0.74 nm in height on the reactive surface. The results herein provide a platform for studying and controlling the self-assembly process of biomolecules into larger supermolecular structures while allowing tunable control through chemical functionalization of the surface. Interest in the mechanisms of formation of fibrillar structures has most commonly been associated with neurodegenerative diseases, such as Alzheimer's and Parkinson's, but fibrils may actually represent the thermodynamic low-energy conformation of a much larger class of peptides and proteins. The protocol developed here is an important step toward uncovering not only the factors that dictate self-assembly but also the mechanisms by which this fibrillar class of superstructures forms.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Synergetic gating of metal-latching ligands and metal-chelating proteins for mesoporous silica nanovehicles to enhance delivery efficiency

Stimuli-responsive drug delivery systems are highly desirable for improved therapeutic efficacy and minimized adverse effects of drugs. Mesoporous silica nanoparticles (MSNs) functionalized with pentadentate ligands, N-(3-trimethoxysilylpropyl)ethylenediamine triacetate (TSP-DATA), in the presence of metal ions with and without myoglobin (Mb)-containing surface-accessible histidine residues, were constructed for pH-triggered controlled release. The DATA ligands immobilized on the MSN pore outlets could encapsulate cargo within the pores by metal latching across pore openings, and release efficiency increased with the increase of surface density of the DATA ligands. The release efficiencies for the metal-chelating protein nanogates, through multiple-site binding of Mb with the metal-chelating ligands, were higher than those for the metal-latching ligand nanogates but were almost independent of surface density of the ligands investigated. Both the metal-latching ligands and the metal-chelating proteins played a synergetic role in gating MSNs for high-loading drug delivery and stimuli-responsive controlled release. The constructed Mb-Cu(2+)-gated MSN delivery system has promising applications in targeted drug therapy of tumors.

Creating protein-imprinted self-assembled monolayers with multiple binding sites and biocompatible imprinted cavities

Imprinted monolayers have several advantages over bulk imprinted polymers such as excellent mass transfer of molecules into and out of imprinted sites and transduction of binding signals detected in real time. Protein-imprinted self-assembled monolayers (SAMs) were created with multiple binding sites and biocompatible imprinted cavities from functional thiols and novel disulfide compounds containing an oligoethylene glycol (OEG) terminal moiety and two amide groups incorporated in the chain (DHAP) in a biologically benign solution. DHAP played an important role in the formation of multiple binding sites and biocompatible cavities in addition to resisting nonspecific protein binding. The created protein-imprinted SAMs exhibited the excellent ability of specific binding of target proteins determined by multiple binding sites and imprinted cavities. The strategy generates tailor-made monolayer surfaces with specific protein binding and opens the possibility of controlled assembly of intellectual biomaterials and preparation of biosensors.

Myoglobin-directed assemblies of binary monolayers functionalized with iminodiacetic acid ligands at the air-water interface through metal coordination for multivalent protein binding

Myoglobin binding to the binary monolayers composed of sodium hexadecylimino diacetate and hexadecanol at the air-water interface by means of metal coordination has been investigated using infrared reflection absorption spectroscopy (IRRAS). In the absence of Cu(2+), no myoglobin binding to the binary monolayers was observed. In the presence of Cu(2+), remarkable myoglobin binding to the binary monolayers resulted from the formation of ternary complexes of iminodiacetate (IDA)-Cu(2+)-surface histidine. Myoglobin-directed assemblies of the binary monolayers facilitated multivalent protein binding through lateral rearrangements of the IDA ligands and reorientations of the alkyl chains for enhanced protein binding. Myoglobin binding to and desorption from the binary monolayers could be readily controlled through metal coordination.

Comparative Study of the Binding of Concanavalin A to Self-Assembled Monolayers Containing a Thiolated α-Mannoside on Flat Gold and on Nanoporous Gold

We have prepared SAMs containing 8-mercaptooctyl α-D-mannopyranoside, either as a single component or in mixed SAMs with n-octanethiol on flat gold surfaces and on nanoporous gold. Electrochemical impedance spectroscopy showed that the mixed SAMs on flat gold surfaces showed the highest Con A binding near 1:9 solution molar ratio of thiolatedα-mannoside to n-octanethiol whereas those on NPG showed the highest response at 1:19 solution molar ratio of thiolated α-mannoside to n-octanethiol. Atomic force microscopy was employed to image the monolayers, and also to image the bound Con A protein.

Multivalent protein binding in carbohydrate-functionalized monolayers through protein-directed rearrangement and reorientation of glycolipids at the air-water interface

Multivalent protein binding plays an important role not only in biological recognition but also in biosensor preparation. Infrared reflection absorption spectroscopy and surface plasmon resonance techniques have been used to investigate concanavalin A (Con A) binding to binary monolayers composed of 1,2-di-O-hexadecyl-sn-glycerol and derived glycolipids with the mannose moieties. The glycolipids in the binary monolayers at the air-water interface underwent both lateral rearrangement and molecular reorientation directed by Con A in the subphase favorable to access of the carbohydrate ligands to protein binding pockets for the formation of multivalent binding sites and the minimization of steric crowding of neighboring ligands for enhanced binding. The amounts of specifically bound proteins in the binary monolayers at the air-water interface were accordingly increased in comparison with those in the initially immobilized monolayers at the air-water interface. The directed rearranged binary monolayers with multivalent protein binding were preserved for the preparation of biosensors.