Effect of Tween 20 on freeze-thawing- and agitation-induced aggregation of recombinant human factor XIII

Molecular mechanisms for stabilizing biologics in the solid state

Protein drugs exhibit challenges of biophysical and biochemical instability due to their structural complexity and rich dynamics. Solid-state biologics aim to enhance stability by increasing molecular rigidity within the formulation matrix, representing a primary category of drug products alongside sterile liquid formulations. Understanding the molecular mechanisms behind the stabilization and destabilization of protein drugs, influenced by formulation composition and drying processes, provides scientific rationale for drug product design. This review aims to elaborate on the two primary models of water-to-sugar substitution and matrix vitrification, respectively, via thermodynamic and kinetic stabilization. It offers an up-to-date review of experimental investigations into these hypotheses, specifically elucidating protein structure and protein-excipient interactions at the molecular level, molecular dynamics across a broad range of motion regimes, and microscopic attributes such as protein-sugar and protein-salt miscibility and microenvironmental acidity, in relevant liquid, frozen, and solid states, using advanced biophysical techniques for solid-state analysis. Moreover, we discuss how these mechanistic understandings facilitate the investigation and prediction of critical stability behaviors and enables the design of solid biological drug products.

Glass Silicone Oil Free Pre-filled Syringe as Primary Container in Autoinjector

OBJECTIVE

Pre-filled syringes (PFSs) have become popular as a convenient and cost-effective container closure system for delivering biotherapeutics. However, standard siliconized PFSs may compromise the stability of therapeutic proteins due to their exposure to the silicone oil-water interface. To address this concern, silicone oil-free (SOF) glass syringes coupled with silicone-oil free plunger stoppers have been developed. This study aims to compare the impact of silicone oil-free (SOF) and siliconized syringes as primary container on protein stability and device functionality of the combination products.

METHODS

The stability of proteins with different modalities was assessed in SOF and siliconized 1 mL glass syringes for up to 6 months at 5℃, 25℃, and 40℃ with levels of subvisible particles and soluble aggregate determined by micro-flow imaging (MFI) and ultra performance size-exclusion chromatography (UP-SEC). The functionality of SOF glass syringes, including break loose force, extrusion force and delivery time in autoinjectors, was evaluated at different time points during the stability study. Additionally, SOF glass syringes were filled with viscosity surrogate ranging from 1 to 90 cP to understand the impact of solution viscosity on break loose force, extrusion force, and autoinjector delivery time.

RESULTS

SOF demonstrates compatibility with proteins and exhibited significantly low particle counts compared to siliconized PFS. SOF syringes show significantly higher break-loose and extrusion forces. However, unlike siliconized syringes where silicone oil migration increases extrusion force, no significant change in functionality was observed in SOF glass syringe during stability testing. Overall, SOF glass syringes showed great potential as an alternative package for biologics with comparable performance on functionality as siliconized PFS.

CONCLUSIONS

The combination of SOF glass and its PTFE coated stopper presents a new primary container closure system with both adequate protein stability and desired functionality features.

Charge-Reversed Exosomes for Targeted Gene Delivery to Cartilage for Osteoarthritis Treatment

Gene therapy has the potential to facilitate targeted expression of therapeutic proteins to promote cartilage regeneration in osteoarthritis (OA). The dense, avascular, aggrecan-glycosaminoglycan (GAG) rich negatively charged cartilage, however, hinders their transport to reach chondrocytes in effective doses. While viral vector mediated gene delivery has shown promise, concerns over immunogenicity and tumorigenic side-effects persist. To address these issues, this study develops surface-modified cartilage-targeting exosomes as non-viral carriers for gene therapy. Charge-reversed cationic exosomes are engineered for mRNA delivery by anchoring cartilage targeting optimally charged arginine-rich cationic motifs into the anionic exosome bilayer by using buffer pH as a charge-reversal switch. Cationic exosomes penetrated through the full-thickness of early-stage arthritic human cartilage owing to weak-reversible ionic binding with GAGs and efficiently delivered the encapsulated eGFP mRNA to chondrocytes residing in tissue deep layers, while unmodified anionic exosomes do not. When intra-articularly injected into destabilized medial meniscus mice knees with early-stage OA, mRNA loaded charge-reversed exosomes overcame joint clearance and rapidly penetrated into cartilage, creating an intra-tissue depot and efficiently expressing eGFP; native exosomes remained unsuccessful. Cationic exosomes thus hold strong translational potential as a platform technology for cartilage-targeted non-viral delivery of any relevant mRNA targets for OA treatment.

Pharmaceutical proteins at the interfaces and the role of albumin

A critical measure of the quality of pharmaceutical proteins is the preservation of native conformations of the active pharmaceutical ingredients. Denaturation of the active proteins in any step before administration into patients could lead to loss of potency and/or aggregation, which is associated with an increased risk of immunogenicity of the products. Interfacial stress enhances protein instability as their adsorption to the air-liquid and liquid-solid interfaces are implicated in the formation of denatured proteins and aggregates. While excipients in protein formulations have been employed to reduce the risk of aggregation, the roles of albumin as a stabilizer have not been reviewed from practical and theoretical standpoints. The amphiphilic nature of albumin makes it accumulate at the interfaces. In this review, we aim to bridge the knowledge gap between interfacial instability and the influence of albumin as a surface-active excipient in the context of reducing the immunogenicity risk of protein formulations.

Visible light triggers the formation of reactive oxygen species in monoclonal antibody formulations

Most monoclonal antibody formulations require the presence of a surfactant, such as polysorbate, to ensure protein stability. The presence of high concentrations of polysorbate have been shown to enhance photooxidation of certain protein drug products when exposed to visible light. The current literature, however, suggest that photooxidation of polysorbate only occurs when exposed to visible light in combination with UVA light. This is probable as peroxides present in polysorbate solutions can be cleaved homolytically in the UVA region. In the visible region, photooxidation is not expected to occur as cleavage of peroxides is not expected at these wavelengths. This report presents findings suggesting that the presence of one or more photosensitiser(s) in polysorbate must be a cause and is required to catalyse the aerobic oxidation of polysorbate solutions upon exposure to visible light. Our investigation aimed to clarify the mechanism(s) of polysorbate photooxidation and explore the kinetics and the identity of the generated radicals and their impact on monoclonal antibody (mAb) degradation. Our study reveals that when polysorbate solutions are exposed to visible light between 400 - 800 nm in the absence of proteins, discolouration, radical formation, and oxygen depletion occur. We discuss the initial formation of reactive species, most likely occurring directly after reaction of molecular oxygen, with the presence of a triplet state photosensitiser, which is generated by intersystem crossing of the excited singlet state. When comparing the photooxidation of PS20 and PS80 in varying quality grades, we propose that singlet oxygen possesses potential for reacting with unsaturated fatty acids in PS80HP, however, PS20HP itself exhibited no measurable oxidation under the tested conditions. The study's final part delves into the photooxidation behaviour of different PS grades, examining its influence on the integrity of a mAb in the formulation. Finally, we examined the effect of photooxidation on the integrity of monoclonal antibodies. Our findings show that the exposure to visible light in polysorbate-containing mAb solutions at high PS concentrations of 4 mg·ml-1 results in increased monoclonal antibody degradation, highlighting the need for cautious evaluation of the correct PS concentration to stabilise protein therapeutics.

High-Throughput Fluorometric Assay For Quantifying Polysorbate In Biopharmaceutical Products Using Micelle Activated Fluorescence Probe N-Phenyl-1-Naphthylamine

PURPOSE

Polysorbates are among the most used surfactants in biopharmaceutical products containing proteins. Our work aims to develop a high-throughput fluorometric assay to further diversify the analytical toolbox for quantification of PSs.

METHOD

The assay leverages the micelle activated fluorescence signal from N-Phenyl-1-Naphthylamine (NPN). The development and optimization of assay parameters were guided by the pre-defined analytical target profile. Furthermore, NMR was used to probe the interaction between protein, PS80 and NPN in the measurement system and understand protein interference.

RESULTS

All assay parameters including excitation and emission wavelengths, standard curve, NPN concentration, and incubation time have been optimized and adapted to a microplate format, making it compatible with automated solutions that will be pursued in the near future to drive consistency and efficiency in our workflows. The specificity, accuracy, and precision of the assay have been demonstrated through a case study. Furthermore, NMR results provided additional insight into the change of the interaction dynamics between PS80 and NPN as the protein concentration increases. The results indicate minimal interaction between the protein and PS80 at lower concentration. However, when the concentration exceeds 75 mg/mL, there is a significant interaction between the protein and PS-80 micelle and monomer.

CONCLUSION

A high-throughput fluorometric assay has been developed for quantification of polysorbates in biopharmaceutical samples including in-process samples, drug substance and drug product. The assay reported herein could serve as a powerful analytical tool for polysorbate quantification and control, complementing the widely used liquid chromatography with charged aerosol detection method.

Quantification of Biopharmaceutically Relevant Nonionic Surfactant Excipients Using Benchtop qNMR

Nonionic surfactant excipients (NISEs) are commonly added to biologics formulations to mitigate the effects of stress incurred by the active biotherapeutic during manufacturing, transport, and storage. During manufacturing, NISEs are added by dilution of a stock solution directly into a protein formulation, and their accurate addition is critical in maintaining the quality and integrity of the drug product and thus ensuring patient safety. This is especially true for the common NISEs, polysorbates 20 and 80 (PS20 and PS80, respectively) and poloxamer 188 (P188). With the increasing diversity of biologic modalities within modern pharmaceutical pipelines, there is thus a critical need to develop and deploy convenient and user-accessible analytical techniques that can rapidly and reliably quantify these NISEs under biopharmaceutically relevant conditions. We thus pursued 60 MHz benchtop quantitative NMR (qNMR) as a nondestructive and user-friendly analytical technique for the quantification of PS20, PS80, and P188 under such conditions. We demonstrated the ability of benchtop qNMR (1) to quantify simulated PS20, PS80, and P188 stock solutions representative of those used during the drug substance (DS) formulation step in biomanufacturing and (2) to quantify these NISEs at and below their target concentrations (≤0.025% w/v) directly in biologics formulations containing histidine, sucrose, and one of three biotherapeutic modalities (monoclonal antibody, antibody-drug conjugate, and Fc-fusion protein). Our results demonstrate that benchtop qNMR offers a fit-for-purpose, reliable, user-friendly, and green analytical route by which NISE of interest to the biopharmaceutical industry may be readily and reliably quantified. We conclude that benchtop qNMR has the potential to be applied to other excipient formulation components in the presence of various biological modalities as well as the potential for routine integration within analytical and QC laboratories across pharmaceutical development and manufacturing sites.

Combined Effect of Shaking Orbit and Vial Orientation on the Agitation-Induced Aggregation of Proteins

Orbital shaking in a glass vial is a commonly used forced degradation test to evaluate protein propensity for agitation-induced aggregation. Vial shaking in horizontal orientation has been widely recommended to maximize the air-liquid interface area while ensuring solution contact with the stopper. We evaluated the impact of shaking orbit diameter and frequency, and glass vial orientation (horizontal versus vertical) on the aggregation of three proteins prepared in surfactant-free formulation buffers. As soon as an orbit-specific frequency threshold was reached, an increase in turbidity was observed for the three proteins in vertical orientation only when using a 3 mm agitation orbit, and in horizontal orientation only when using a 30 mm agitation orbit. Orthogonal analyses confirmed turbidity was linked to protein aggregation. The most turbid samples had a visually more homogeneous appearance in vertical than in horizontal orientation, in line with the predicted dispersion of air and liquid phases obtained from computational fluid dynamics agitation simulations. Both shaking orbits were used to assess the performance of nonionic surfactants. We show that the propensity of a protein to aggregate in a vial agitated in horizontal or vertical orientation depends on the shaking orbit, and confirm that Brij® 58 and FM1000 prevent proteins from agitation-induced aggregation at lower concentrations than polysorbate 80.

Understanding adsorption behavior of Polysorbate-20 to sterile filters in therapeutic proteins final filtration process

Surfactants are commonly used in the therapeutic protein manufacturing process as stabilizer. Polysorbate-20 (PS-20) is one of the most commonly used surfactants to mitigate protein aggregation in the therapeutic protein formulation. It has been observed that polysorbate can be adsorbed by sterile filters during the final filtration process, which poses risk of uneven distribution and potentially reduced polysorbate concentration in final products. In this study, we evaluated the PS-20 adsorption behavior using commonly used sterilizing-grade microfiltration (MF) membranes via a customized filtration set-up. The effect of membrane properties, including the membrane materials, modification, and layer configuration were studied. In addition, the effect of PS-20 concentration was evaluated and the PS-20 adsorption amount by each type of membranes was determined quantitatively and showed good agreement with the in-process adsorption results. Finally, the selection of sterile filters and strategy of pre-flush are discussed for ensuring accurate PS-20 content in the final therapeutic protein drug product.

Strategies for overcoming protein and peptide instability in biodegradable drug delivery systems

The global pharmaceutical market has recently shifted its focus from small molecule drugs to peptide, protein, and nucleic acid drugs, which now comprise a majority of the top-selling pharmaceutical products on the market. Although these biologics often offer improved drug specificity, new mechanisms of action, and/or enhanced efficacy, they also present new challenges, including an increased potential for degradation and a need for frequent administration via more invasive administration routes, which can limit patient access, patient adherence, and ultimately the clinical impact of these drugs. Controlled-release systems have the potential to mitigate these challenges by offering superior control over in vivo drug levels, localizing these drugs to tissues of interest (e.g., tumors), and reducing administration frequency. Unfortunately, adapting controlled-release devices to release biologics has proven difficult due to the poor stability of biologics. In this review, we summarize the current state of controlled-release peptides and proteins, discuss existing techniques used to stabilize these drugs through encapsulation, storage, and in vivo release, and provide perspective on the most promising opportunities for the clinical translation of controlled-release peptides and proteins.

Raman Marker Bands for Secondary Structure Changes of Frozen Therapeutic Monoclonal Antibody Formulations During Thawing

In this work we use Raman spectroscopy for protein characterization in the frozen state. We investigate the behavior of frozen therapeutic monoclonal antibody IgG1 formulation upon thawing by Raman spectroscopy. Secondary and tertiary structure of the protein in three different mab formulations in the frozen state are followed through observation of marker bands for α-helix, β-sheet and random coil. We identify the tyrosine intensity ratio I₈₅₆/I₈₃₀ as a marker for mab aggregation. Upon fast cooling (40 °C/min) to -80 °C we observe a significant increase of random coil and α -helical structures, while this is not the case for slower cooling (20 °C/min) to -80 °C. Most changes in the protein's secondary structure are observed in the course of thawing in the range up to -20 °C, when passing through the glass transitions and cold-crystallization of the two types of freeze-concentrated solutions formed through macro- and microcryoconcentration. An increase of protein concentration and the addition of mannitol suppress secondary structural changes but do no impact on aggregation.

Alternative Excipients for Protein Stabilization in Protein Therapeutics: Overcoming the Limitations of Polysorbates

Given their safety and efficiency in protecting protein integrity, polysorbates (PSs) have been the most widely used excipients for the stabilization of protein therapeutics for years. In recent decades, however, there have been numerous reports about visible or sub-visible particles in PS-containing biotherapeutic products, which is a major quality concern for parenteral drugs. Alternative excipients that are safe for parenteral administration, efficient in protecting different protein drugs against various stress conditions, effective in protein stabilization in high-concentrated liquid formulations, stable under the storage conditions for the duration of the product's shelf-life, and compatible with other formulation components and the primary packaging are highly sought after. The aim of this paper is to review potential alternative excipients from different families, including surfactants, carbohydrate- and amino acid-based excipients, synthetic amphiphilic polymers, and ionic liquids that enable protein stabilization. For each category, important characteristics such as the ability to stabilize proteins against thermal and mechanical stresses, current knowledge related to the safety profile for parenteral administration, potential interactions with other formulation components, and primary packaging are debated. Based on the provided information and the detailed discussion thereof, this paper may pave the way for the identification or development of efficient excipients for biotherapeutic protein stabilization.

Selection of cryoprotectants for freezing and freeze-drying of gold nanoparticles towards further uses in various applications

Recently, cryopreservation of AuNPs without aggregation has been attempted to improve their long-term stability. This study investigated criteria to select cryoprotectants for AuNPs using a variety of materials, including sugar (sucrose), surfactant (Tween 20), polymers (polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP)), and biopolymer (pectin). For cryoprotective performance, UV-vis spectroscopy reveals the potential of all cryoprotectants for preventing citrate-capped AuNPs (cit-AuNPs) from irreversible aggregation under freezing. While sucrose, PVP, and pectin were more suitable than Tween 20 and PVA as cryoprotectants for lyophilization of AuNPs with the maintained redispersability. For storage and further use, Luria-Bertani agar plate, dynamic light scattering (DLS), and transmission electron microscopy (TEM) results indicate impacts of the cryoprotectant coexisted with AuNPs after resuspension and imply that washing of the restored AuNPs is encouraged. Otherwise, running the restored AuNPs through applications, such as functionalization, protein conjugation, and surface-enhanced Raman scattering (SERS), without washing the cryoprotectant could lead to inaccurate results. This study also serves as a guideline for a comprehensive practice flow of AuNP handling, encompassing the synthesis step, cryopreservation, and use after resuspension.

Enhanced protein aggregation suppressor activity of N-acetyl-l-arginine for agitation-induced aggregation with silicone oil and its impact on innate immune responses

Previously, N-acetyl-l-arginine (NALA) suppressed the aggregation of intravenous immunoglobulins (IVIG) more effectively and with a minimum decrease in transition temperature (T_m) than arginine monohydrochloride. In this study, we performed a comparative study with etanercept (commercial product: Enbrel®), where 25 mM arginine monohydrochloride (arginine) was added to the prefilled syringe. The biophysical properties were investigated using differential scanning calorimetry (DSC), dynamic light scattering (DLS), size-exclusion chromatography (SEC), and flow-imaging microscopy (FI). NALA retained the transition temperature of etanercept better than arginine, where arginine significantly reduced the T_m by increasing its concentration. End-over-end rotation was applied to each formulation for 5 days to accelerate protein aggregation and subvisible particle formation. Higher monomeric content was retained with NALA with a decrease in particle level. Higher aggregation onset temperature (T_agg) was detected for etanercept with NALA than arginine. The results of this comparative study were consistent with previous study, suggesting that NALA could be a better excipient for liquid protein formulations. Agitated IVIG and etanercept were injected into C57BL/6 J female mice to observe immunogenic response after 24 h. In the presence of silicone oil, NALA dramatically reduced IL-1 expression, implying that decreased aggregation was related to reduced immunogenicity of both etanercept and IVIG.

Emerging Challenges and Innovations in Surfactant-mediated Stabilization of Biologic Formulations

Biologics may be subjected to various destabilizing conditions during manufacturing, transportation, storage, and use. Therefore, biologics must be appropriately formulated to meet their desired quality target product profiles. In the formulations of protein-based biologics, one critical component is surfactant. Polysorbate 80 and Polysorbate 20 remain the most commonly used surfactants. Surfactants can stabilize proteins through different mechanisms and help the proteins withstand destabilization stresses. However, the challenges associated with surfactants, for instance, impurities, degradation, and potential triggering of adverse immune responses, have been encountered. Therefore, there are continued efforts to develop novel surfactants to overcome these challenges associated with traditional surfactants. Meanwhile, surfactants have also found their use in formulations of newer and novel modalities, namely, antibody-drug conjugates, bispecific antibodies, and adeno-associated viruses (AAV). This review provides an updated in-depth discussion of surfactants in the above-mentioned areas, namely mechanism of action of surfactants, a critical review of challenges with surfactants and current mitigation approaches, and emerging technologies to develop novel surfactants. In addition, gaps, current mitigations, and future directions have been presented to trigger further discussion and research to facilitate the use and development of novel surfactants.

Monitoring heterogeneity in therapeutic samples using Schlieren

Antigen, antibodies, and other therapeutic biomolecule solutions are likely to undergo physical and chemical processes during their development, manufacturing, transport, and storage. This can induce internal stresses in the sample, resulting in aggregation, heterogeneities, and an overall reduction in the sample quality, e.g., freeze-thawing of samples for storage. Monitoring mixing is thus crucial to ensure homogeneity and consistency while further optimizing downstream processes. We present a simple and portable all-lens Schlieren setup to detect, visualize, and quantify heterogeneities in the protein/antigen or other pharmaceutical solutions during and after thawing in real-time. We illustrate the capabilities of the proposed method by visualizing and quantifying heterogeneities during the thawing of BSA and IgG in four different formulation buffers. The local concentration gradients in a thawing sample lead to light intensity variations which are captured using the Schlieren technique. The sample heterogeneity can then be quantified by relating these light intensity variations to concentration gradients. To this end, we first measure the refractive index of the sample solutions, which varies linearly with the sample concentration. This linear relation is then used to extract the concentration gradient field from the light intensity data. We establish the validity of the proposed approach by demonstrating its accuracy in measuring the diffusion coefficient of a diffusing interface. The portability of the setup and its applicability to a wide range of pharmaceutical solutions make this Schlieren-based technique suitable for monitoring the mixing, heterogeneity, and stability of pharmaceutical samples.

Aggregation of protein therapeutics enhances their immunogenicity: causes and mitigation strategies

Protein aggregation in biotherapeutics has been identified to increase immunogenicity, leading to immune-mediated adverse effects, such as severe allergic responses including anaphylaxis. The induction of anti-drug antibodies (ADAs) moreover enhances drug clearance rates, and can directly block therapeutic function. In this review, identified immune activation mechanisms triggered by protein aggregates are discussed, as well as physicochemical properties of aggregates, such as size and shape, which contribute to immunogenicity. Furthermore, factors which contribute to protein stability and aggregation are considered. Lastly, with these factors in mind, we encourage an innovative and multidisciplinary approach with regard to further research in the field, with the overall aim to avoid immunogenic aggregation in future drug development.

Freeze-drying of nanoparticles: How to overcome colloidal instability by formulation and process optimization

Lyophilization of nanoparticle (NP) suspensions is a promising technology to improve stability, especially during long-term storage, and offers new routes of administration in solid state. Although considered as a gentle drying process, freeze-drying is also known to cause several stresses leading to physical instability, e.g. aggregation, fusion, or content leakage. NPs are heterogeneous regarding their physico-chemical properties which renders them different in their sensitivity to lyophilization stress and upon storage. But still basic concepts can be deducted. We summarize basic colloidal stabilization mechanisms of NPs in the liquid and the dried state. Furthermore, we give information about stresses occurring during the freezing and the drying step of lyophilization. Subsequently, we review the most commonly investigated NP types including lipophilic, polymeric, or vesicular NPs regarding their particle properties, stabilization mechanisms in the liquid state, and important freeze-drying process, formulation and storage strategies. Finally, practical advice is provided to facilitate purposeful formulation and process development to achieve NP lyophilizates with high colloidal stability.

The Role of Cyclodextrins against Interface-Induced Denaturation in Pharmaceutical Formulations: A Molecular Dynamics Approach

Protein-based pharmaceutical products are subject to a variety of environmental stressors, during both production and shelf-life. In order to preserve their structure, and, therefore, functionality, it is necessary to use excipients as stabilizing agents. Among the eligible stabilizers, cyclodextrins (CDs) have recently gained interest in the scientific community thanks to their properties. Here, a computational approach is proposed to clarify the role of β-cyclodextrin (βCD) and 2-hydroxypropyl-β-cyclodextrin (HPβCD) against granulocyte colony-stimulating (GCSF) factor denaturation at the air–water and ice–water interfaces, and also in bulk water at 300 or 260 K. Both traditional molecular dynamics (MD) simulations and enhanced sampling techniques (metadynamics, MetaD) are used to shed light on the underlying molecular mechanisms. Bulk simulations revealed that CDs were preferentially included within the surface hydration layer of GCSF, and even included some peptide residues in their hydrophobic cavity. HPβCD was able to stabilize the protein against surface-induced denaturation in proximity of the air–water interface, while βCD had a destabilizing effect. No remarkable conformational changes of GCSF, or noticeable effect of the CDs, were instead observed at the ice surface. GCSF seemed less stable at low temperature (260 K), which may be attributed to cold-denaturation effects. In this case, CDs did not significantly improve conformational stability. In general, the conformationally altered regions of GCSF seemed not to depend on the presence of excipients that only modulated the extent of destabilization with either a positive or a negative effect.

Hydrolytic polysorbate 20 degradation - Sensitive detection of free fatty acids in biopharmaceuticals via UPLC-QDa analytics with isolator column

The enzymatic hydrolysis of polysorbates, e.g. induced by specific host cell proteins in biologics, is a known risk factor regarding the potential particle formation in the product over time. One of the root causes for this observation is an increase in free fatty acids (FA) within the formulation, which indicates the need for convenient monitoring of FA release. This study presents a novel UPLC-QDa based method to evaluate the content of the FAs esterified to polysorbate 20 (PS20) after hydrolysis. The presented method is label-free, i.e. independent of elaborate fluorophore-labeling and able to directly measure the ionized FAs. Furthermore, the method allows the determination of released FAs as percentage of ester bond hydrolysis and as absolute concentration expressed in ng/mL. Additionally, we describe for the first time in FA analytics the application of an isolator column, to remove trace levels of FAs present in the eluents to improve the sensitivity of the method. Lastly, the capabilities of the newly developed method are proven in case studies with three different monoclonal antibodies, which display characteristic FA release patterns in PS20-containing formulations. In summary, we developed a reliable, sensitive method for FA quantification in biologics, which could also be used as a predictive tool, considering FA solubility, regarding the formation of particles.

Light-Induced Histidine Adducts to an IgG1 Molecule Via Oxidized Histidine Residue and the Potential Impact of Polysorbate-20 Concentration

PURPOSE

Histidine (His) undergoes light-induced reactions such as oxidation, crosslinking and addition. These reactions are initiated by singlet oxygen (¹O₂) to generate His photo-oxidation products, which are subject to nucleophilic attack by a non-oxidized His residue from another protein or by nucleophilic buffer components such as Tris and His. This report aims to identify light-induced His-adducts to a monoclonal antibody (mAb-1) due to the reaction of His molecules in the buffer with the photooxidized His residues under ICH light conditions. Since polysorbate-20 (PS-20) is a commonly used excipient in biotherapeutics formulation, it is also important to study the impact of PS-20 concentration on protein photostability.

RESULTS

We identified and characterized light-induced His-adducts of mAb-1 by LC-MS/MS. We showed that the levels of light-induced His-adducts generally correlate with the solvent accessibility of His residues in the protein. In addition, the presence of PS-20 at concentrations commonly used in protein drug formulations can significantly increase the levels of light-induced His-adducts.

CONCLUSIONS

Since His residues are present in a conserved region in the Fc domain, and may be present in the complementarity-determining region (CDR), the impact on the biological functions of the His-adducts observed here should be further studied to evaluate the risk of their presence.

A fast and facile platform for fabricating phase-change materials-based drug carriers powered by chemical Marangoni effect

Emulsions of oil droplets as drug carriers are typically formulated by emulsification, which is complex and time-consuming and requires high energy input. To address these concerns, a fast and facile method for fabricating lipid-based oil droplets, using propulsive forces that arise from the chemical Marangoni effect, is developed for the oral delivery of lipophilic drugs, such as vitamin D. The oil droplets are prepared by solubilizing vitamin D in a phase-changeable fatty acid with the addition of ethanol as an oil phase, which is then deposited on a water bath. As a result of the differing surface tensions of water and ethanol (chemical energy), propulsive Marangoni forces are generated (kinetic energy), rapidly spreading the oil phase into many tiny oil droplets. To prevent their coalescence, the generated oil droplets are solidified by reducing their environmental temperature. Following oral administration, the fluidity of the solidified droplets increases at body temperature; they can be further emulsified into the vitamin D-containing micelles by intestinal bile salts. The micelles are then taken up by the intestinal epithelial cells, enabling their contained vitamin D to be absorbed into systemic circulation, improving its oral bioavailability.

N-Acetylated-L-arginine (NALA) is an enhanced protein aggregation suppressor under interfacial stresses and elevated temperature for protein liquid formulations

Even though arginine hydrochloride has been recognized as a protein aggregation suppressor in the biopharmaceutical industry, its use has been questioned due to decreasing transition unfolding temperatures (T_m). Four compounds were designed to enhance the role of arginine by changing the length of the carbon chain with removal or N-acetylation of α-amino group. Biophysical properties were observed by differential scanning calorimetry (DSC), dynamic light scattering (DLS), size-exclusion chromatography (SEC), and flow imaging (FI). N-Acetyl-L-arginine (NALA) performed the best at minimizing decrease in T_m with arginine at different pH. NALA also demonstrated relatively higher colloidal stability than arginine hydrochloride, especially in the acidic pH, thereby reducing agitation stress of IgG. Moreover, NALA exhibited a cooperative effect with commercially used glycine buffer for IVIG to maintain the monomer contents with almost no change and suppressed larger particle formation after agitation with heat. The study concludes that the decreasing T_m of proteins by arginine hydrochloride is due to amide group in the α-carbon chain. Moreover, chemical modification on the group compared to removing it will be a breakthrough of arginine's limitations and optimize storage stability of protein therapeutics.

Stability Studies of the Vaccine Adjuvant U-Omp19

Unlipidated outer membrane protein 19 (U-Omp19) is a novel mucosal adjuvant in preclinical development to be used in vaccine formulations. U-Omp19 holds two main properties, it is capable of inhibiting gastrointestinal and lysosomal peptidases, increasing the amount of co-administered antigen that reaches the immune inductive sites and its half-life inside cells, and it is able to stimulate antigen presenting cells in vivo. These activities enable U-Omp19 to enhance the adaptive immune response to co-administrated antigens.

To characterize the stability of U-Omp19 we have performed an extensive analysis of its physicochemical and biological properties in a 3-year long-term stability study, and under potentially damaging freeze-thawing and lyophilization stress processes. Results revealed that U-Omp19 retains its full protease inhibitor activity, its monomeric state and its secondary structure even when stored in solution for 36 months or after multiple freeze-thawing cycles. Non-enzymatic hydrolysis resulted the major degradation pathway for storage in solution at 4 °C or room temperature which can be abrogated by lyophilization yet increasing protein tendency to form aggregates.

This information will play a key role in the development of a stable formulation of U-Omp19, allowing an extended shelf-life during manufacturing, storage, and shipping of a future vaccine containing this pioneering adjuvant.

The Impact of Formulation Composition and Process Settings of Traditional Batch Versus Continuous Freeze-Drying On Protein Aggregation

The long-term stability of therapeutic protein products can be extended by freeze-drying. However, the freeze-drying process itself has several harmful stresses. A rationalized formulation design can significantly mitigate protein damage caused by freezing, dehydration and interfacial stresses of lyophilization and reconstitution. Recently, a continuous spin-freeze-drying concept was proposed as a more economical, controllable, flexible and qualitative alternative to batch freeze-drying. The purpose of this work is to compare spin-freeze-drying to traditional batch freeze-drying with regard to protein physical stability. The impacts of spinning, freezing and drying were investigated for both processing methods. Herewith, the interaction between these process phases and two common rational formulation strategies, (i.e. adding a disaccharide and a surfactant) was examined. Protein aggregates formed due to the process phase stresses were characterized with particle counting techniques and size exclusion chromatography. It was found that spin-freeze-drying exhibited essentially identical stresses causing comparable aggregation in all the process phases as compared to batch freeze-drying. Moreover, there were also analogous impacts of the formulation excipients. These observations led to the conclusion that similar freeze-drying formulation excipients and strategies tested for decades in batch freeze-drying of proteins can be utilized for spin-freeze-drying; in order to maintain protein stability during processing.

Controlled polysorbate 20 hydrolysis - A new approach to assess the impact of polysorbate 20 degradation on biopharmaceutical product quality in shortened time

Hydrolysis of polysorbate in biopharmaceutical liquid formulations upon long-term storage represents a risk factor, since reduction of the intact surfactant concentration may compromise protein stability. Moreover, accumulation of polysorbate degradation products is associated with the formation of particulates potentially affecting drug product stability and quality. These effects are conventionally assessed by real-time end-of-shelf life studies constituting an integral yet lengthy process of formulation development. To accelerate this procedure, we describe here a powerful tool to conduct shake stress studies based on the controlled hydrolysis of polysorbate 20 by beads-immobilized lipases. For this purpose, the production of stable, partially degraded material characterized by a representative presence of non-emulsifying degradants such as ethoxylated sorbitan and free fatty acids was monitored by state-of-the-art chromatographic methods ensuring realistic pharmaceutical conditions. Freeze-thaw, shaking and shipping stress studies of a mAb formulation did not only demonstrate that this approach is useful to determine the critical degradation level impairing drug product quality, but furthermore revealed significant differences in protective effects depending on the hydrolysis pattern. As these results emphasize, the outlined strategy may support formulation scientists to unveil the interrelationship between polysorbate hydrolysis products and stabilization of the active pharmaceutical ingredient in a holistic and time-saving manner.

Comprehensive Temperature Excursion Management Program for the Commercial Distribution of Biopharmaceutical Drug Products

Biopharmaceutical drug products may be exposed to temperatures outside of the intended storage temperature range (typically 2-8°C) during commercial distribution due to uncontrolled variables and unexpected events. Pharmaceutical companies are expected to ensure that product quality and stability are not negatively impacted by temperature excursions defined as being acceptable for the product. It is imperative that all firms involved in the distribution understand key elements of the temperature excursion management program in place to overcome the challenges of global distribution and comply with regulatory requirements. Proactive implementation of a comprehensive temperature excursion management program is expected to help achieve successful commercial distribution. In this article, important aspects related to the key elements of a comprehensive temperature excursion management program are summarized, including standard stability testing, regulatory expectations related to the justification of temperature excursions, thermal cycling studies to assess and support potential temperature excursions (including how/when thermal cycling study data is used to support temperature excursions), good distribution practices to minimize temperature excursions and use of theoretical methods/mathematical simulation models to assess temperature excursions. A comprehensive temperature excursion management program is expected to ensure product quality and help minimize, assess, and justify temperature excursions more efficiently, ensure regulatory compliance and avoid business impact caused by the loss of products or inadequate supply.

Spatially Resolved Effects of Protein Freeze-Thawing in a Small-Scale Model Using Monoclonal Antibodies

Protein freeze-thawing is frequently used to stabilize and store recombinantly produced proteins after different unit operations in upstream and downstream processing. However, freeze-thawing is often accompanied by product damage and, hence, loss of product. Different effects are responsible, including cold denaturation, aggregation effects, which are caused by inhomogeneities in protein concentration, as well as pH and buffer ingredients, especially during the freeze cycle. In this study, we tested a commercially available small-scale protein freezing unit using immunoglobin G (IgG) as monoclonal antibody in a typical formulation buffer containing sodium phosphate, sodium chloride, and Tween 80. Different freezing rates were used respectively, and the product quality was tested in the frozen sample. Spatially resolved tests for protein concentration, pH, conductivity, and aggregation revealed high spatial differences in the frozen sample. Usage of slow freezing rates revealed high inhomogeneities in terms of buffer salt and protein distribution, while fast rates led to far lower spatial differences. These protein and buffer salt inhomogeneities can be reliably monitored using straight forward analytics, like conductivity and photometric total protein concentration measurements, reducing the need for HPLC analytics in screening experiments. Summarizing, fast freezing using steep rates shows promising results concerning homogeneity of the final frozen product and inhibits increased product aggregation.

Efficient optimization of high-dose formulation of novel lyophilizates for dry powder inhalation by the combination of response surface methodology and time-of-flight measurement

Inhalation of proteins/peptides has recently received attention as various biopharmaceuticals have emerged on the market. Novel lyophilisates for dry powder inhalation (LDPIs), which are aerosolized by air impact, have been reported and LDPIs are considered an attractive option for the pulmonary administration of biopharmaceuticals. However, desirable disintegration and aerosolization properties have been unavailable in high-dose formulations, which has been a critical issue. This study aimed to investigate high-dose LDPIs and their optimization. In the present study, lysozyme (Lysoz) was used as a stable model protein and formulated with various amino acids. Furthermore, response surface methodology (RSM) and time-of-flight measurement were applied for efficient optimization. Superior disintegration and aerosolization properties were confirmed in the LDPIs with phenylalanine (Phe) and leucine (Leu). RSM results revealed that 0.5 mg/vial of Phe and 1.0 mg/vial of Leu are the optimal quantities for high-dose formulation. Based on these optimum quantities, high-dose LDPI formulations were prepared and the maximum formulable quantity of Lysoz with acceptable inhalation performance was confirmed to be 3.0 mg/vial. The results suggest that LDPI can cover the milligram-order pulmonary administration of proteins/peptides. LDPIs are expected to have biopharmaceutical applications.

M. Brito R. Structure and Aggregation Mechanisms in Amyloids

The aggregation of a polypeptide chain into amyloid fibrils and their accumulation and deposition into insoluble plaques and intracellular inclusions is the hallmark of several misfolding diseases known as amyloidoses. Alzheimer′s, Parkinson′s and Huntington’s diseases are some of the approximately 50 amyloid diseases described to date. The identification and characterization of the molecular species critical for amyloid formation and disease development have been the focus of intense scrutiny. Methods such as X-ray and electron diffraction, solid-state nuclear magnetic resonance spectroscopy (ssNMR) and cryo-electron microscopy (cryo-EM) have been extensively used and they have contributed to shed a new light onto the structure of amyloid, revealing a multiplicity of polymorphic structures that generally fit the cross-β amyloid motif. The development of rational therapeutic approaches against these debilitating and increasingly frequent misfolding diseases requires a thorough understanding of the molecular mechanisms underlying the amyloid cascade. Here, we review the current knowledge on amyloid fibril formation for several proteins and peptides from a kinetic and thermodynamic point of view, the structure of the molecular species involved in the amyloidogenic process, and the origin of their cytotoxicity.

Armoring the Interface with Surfactants to Prevent the Adsorption of Monoclonal Antibodies

The pharmaceutical industry uses surface-active agents (excipients) in protein drug formulations to prevent the aggregation, denaturation, and unwanted immunological response of therapeutic drugs in solution as well as at the air/water interface. However, the mechanism of adsorption, desorption, and aggregation of proteins at the interface in the presence of excipients remains poorly understood. The objective of this work is to explore the molecular-scale competitive adsorption process between surfactant-based excipients and two monoclonal antibody (mAb) proteins, mAb-1 and mAb-2. We use pendant bubble tensiometry to measure the ensemble average adsorption dynamics of mAbs with and without the excipient. The surface tension measurements allow us to quantify the rate at which the molecules "race" to the interface in single-component and mixed systems. These results define the phase space, where coadsorption of both mAbs and excipients occurs onto the air/water interface. In parallel, we use X-ray reflectivity (XR) measurements to understand the molecular-scale dynamics of competitive adsorption, revealing the surface-adsorbed amounts of the antibody and excipient. XR has revealed that at a sufficiently high surface concentration of the excipient, mAb adsorption to the surface and subsurface domains was inhibited. In addition, despite the fact that both mAbs adsorb via a similar mechanistic pathway and with similar dynamics, a key finding is that the competition for the interface directly correlates with the surface activity of the two mAbs, resulting in a fivefold difference in the concentration of the excipient needed to displace the antibody.

Controlled Peptide-Mediated Vesicle Fusion Assessed by Simultaneous Dual-Colour Time-Lapsed Fluorescence Microscopy

We have employed a model system, inspired by SNARE proteins, to facilitate membrane fusion between Giant Unilamellar Vesicles (GUVs) and Large Unilamellar Vesicles (LUVs) under physiological conditions. In this system, two synthetic lipopeptide constructs comprising the coiled-coil heterodimer-forming peptides K₄, (KIAALKE)₄, or E₄, (EIAALEK)₄, a PEG spacer of variable length, and a cholesterol moiety to anchor the peptides into the liposome membrane replace the natural SNARE proteins. GUVs are functionalized with one of the lipopeptide constructs and the fusion process is triggered by adding LUVs bearing the complementary lipopeptide. Dual-colour time lapse fluorescence microscopy was used to visualize lipid- and content-mixing. Using conventional confocal microscopy, lipid mixing was observed on the lipid bilayer of individual GUVs. In addition to lipid-mixing, content-mixing assays showed a low efficiency due to clustering of K₄-functionalized LUVs on the GUVs target membranes. We showed that, through the use of the non-ionic surfactant Tween 20, content-mixing between GUVs and LUVs could be improved, meaning this system has the potential to be employed for drug delivery in biological systems.

Kappa-on-Heavy (KoH) bodies are a distinct class of fully-human antibody-like therapeutic agents with antigen-binding properties

We describe a Kappa-on-Heavy (KoH) mouse that produces a class of highly diverse, fully human, antibody-like agents. This mouse was made by replacing the germline variable sequences of both the Ig heavy-chain (IgH) and Ig kappa (IgK) loci with the human IgK germline variable sequences, producing antibody-like molecules with an antigen binding site made up of 2 kappa variable domains. These molecules, named KoH bodies, structurally mimic naturally existing Bence-Jones light-chain dimers in their variable domains and remain wild-type in their antibody constant domains. Unlike artificially diversified, nonimmunoglobulin alternative scaffolds (e.g., DARPins), KoH bodies consist of a configuration of normal Ig scaffolds that undergo natural diversification in B cells. Monoclonal KoH bodies have properties similar to those of conventional antibodies but exhibit an enhanced ability to bind small molecules such as the endogenous cardiotonic steroid marinobufagenin (MBG) and nicotine. A comparison of crystal structures of MBG bound to a KoH Fab versus a conventional Fab showed that the KoH body has a much deeper binding pocket, allowing MBG to be held 4 Å further down into the combining site between the 2 variable domains.

Novel High-Throughput Assay for Polysorbate Quantification in Biopharmaceutical Products by Using the Fluorescent Dye DiI

Polysorbates (PSs) are the most common surfactants in therapeutic protein formulations, and it is crucial to monitor their concentration along the life cycle of biopharmaceuticals. We developed a simple multi-well plate fluorescence-based assay for the rapid determination of PS20 and PS80 content in biopharmaceutical products. The method is based on the detection of the fluorescence emission intensity of the fluorescent dye 1,1'-Dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate in the presence of PSs at concentrations below their critical micelle concentration. This method can be applied for PS content determination in protein formulations (≤100 mg/mL) without the need of a previous protein removal step. The 1,1'-Dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate assay implemented in multi-well plate format is suitable for high-throughput concentration screening. It has a linear range from 0.00020% to 0.0025% (w/v) PS20, and the limits of detection and quantification were 0.00020% and 0.00055% (w/v), respectively. This assay is markedly more selective and shows no or lower interferences due to hydrophobic components (e.g., silicone oil) potentially present in finished products than the fluorescence micelle assay based on N-phenyl-1-naphthylamine. It also provides comparable results for the PS content in liquid chromatography with charged aerosol detection analysis with protein removal, providing a fast alternative.

Clinical-Grade Oncolytic Adenovirus Purification Using Polysorbate 20 as an Alternative for Cell Lysis

Introduction:

Oncolytic virus therapy is currently considered as a promising therapeutic ap-proach for cancer treatment. Adenovirus is well-known and extensively characterized as an oncolytic agent. The increasing number of clinical trials using this virus generates the demand for the development of a well-established purification approach. Triton X-100 is commonly used in cell lysis buffer prepara-tions. The addition of this surfactant in the list of substances with the very high concern of the Registra-tion, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation promoted the research for effective alternatives.

Methods:

In this work, a purification strategy for oncolytic adenovirus compatible with phase I clinical trials, using an approved surfactant – Polysorbate 20 was developed. The proposed downstream train, composed by clarification, concentration using tangential flow filtration, intermediate purification with anion exchange chromatography, followed by a second concentration and a final polishing step was evaluated for both Triton X-100 and Polysorbate 20 processes. The impact of cell lysis with Polysorb-ate20 and Triton X-100 for each downstream step was evaluated in terms of product recovery and impu-rities removal. Overall, 61 ± 4% of infectious viral particles were recovered. Depletion of host cell pro-teins and ds-DNA was 99.9% and 97.1%, respectively.

Results & Conclusion:

The results indicated that Polysorbate 20 can be used as a replacement for Triton X-100 during cell lysis with no impact on product recovery, potency, and purity. Moreover, the devel-oped process is scalable and able to provide a highly purified product to be used in phase I and II clinical trials.

Stabilization of Intrinsically Disordered DKK2 Protein by Fusion to RNA-Binding Domain

Intrinsic disorders are a common feature of hub proteins in eukaryotic interactomes controlling the signaling pathways. The intrinsically disordered proteins (IDPs) are prone to misfolding, and maintaining their functional stability remains a major challenge in validating their therapeutic potentials. Considering that IDPs are highly enriched in RNA-binding proteins (RBPs), here we reasoned and confirmed that IDPs could be stabilized by fusion to RBPs. Dickkopf2 (DKK2), Wnt antagonist and a prototype IDP, was fused with lysyl-tRNA synthetase (LysRS), with or without the fragment crystallizable (Fc) domain of an immunoglobulin and expressed predominantly as a soluble form from a bacterial host. The functional competence was confirmed by in vitro Wnt signaling reporter and tube formation in human umbilical vein endothelial cells (HUVECs) and in vivo Matrigel plug assay. The removal of LysRS by site-specific protease cleavage prompted the insoluble aggregation, confirming that the linkage to RBP chaperones the functional competence of IDPs. While addressing to DKK2 as a key modulator for cancer and ischemic vascular diseases, our results suggest the use of RBPs as stabilizers of disordered proteinaceous materials for acquiring and maintaining the structural stability and functional competence, which would impact the druggability of a variety of IDPs from human proteome.

Controlling and quantifying the stability of amino acid-based cargo within polymeric delivery systems

In recent years, the rapid growth and availability of protein and peptide therapeutics has not only expanded the boundaries of modern science but has also revolutionized the practice of medicine today. The potential of such therapies, however, is greatly limited by the innate instabilities of proteins and peptides, which is further magnified during therapeutic formulation processing, transport, storage, and administration. In this paper, we will consider the unique stability challenges associated with protein/peptide polymeric delivery systems from an engineering approach oriented towards the quantification and modification of amino acid-based cargo stability. While a number of methods have been developed for the purposes of quantifying factors affecting protein and peptide stability, current measurement techniques remain largely limited in scope in regard to polymeric drug delivery systems. This paper will primarily describe the influence of water content, pH, and temperature on protein and peptide stability within polymer-based delivery systems. Moreover, we will review current instrumentation used to quantify factors affecting protein/peptide stability with respect to water content, pH, and temperature. Lastly, we will outline several recommendations to help guide future research efforts to develop methods more specific to quantifying protein/peptide stability within polymer-based delivery systems.

Preferential adsorption to air-water interfaces: a novel cryoprotective mechanism for LEA proteins

Late embryogenesis abundant (LEA) proteins comprise a diverse family whose members play a key role in abiotic stress tolerance. As intrinsically disordered proteins, LEA proteins are highly hydrophilic and inherently stress tolerant. They have been shown to stabilise multiple client proteins under a variety of stresses, but current hypotheses do not fully explain how such broad range stabilisation is achieved. Here, using neutron reflection and surface tension experiments, we examine in detail the mechanism by which model LEA proteins, AavLEA1 and ERD10, protect the enzyme citrate synthase (CS) from aggregation during freeze–thaw. We find that a major contributing factor to CS aggregation is the formation of air bubbles during the freeze–thaw process. This greatly increases the air–water interfacial area, which is known to be detrimental to folded protein stability. Both model LEA proteins preferentially adsorb to this interface and compete with CS, thereby reducing surface-induced aggregation. This novel surface activity provides a general mechanism by which diverse members of the LEA protein family might function to provide aggregation protection that is not specific to the client protein.

Enhancing Stability of Exenatide-Containing Pressurized Metered-Dose Inhaler Via Reverse Microemulsion System

The dispersibility and stability issues of peptide drugs during preparation and storage hinder the widespread adoption of pressurized metered-dose inhaler (pMDI). This study aimed to develop a reverse microemulsion (RM) of exenatide (EXE) pMDI through a liquid-based bottom-up method, thus to overcome the stability issue of peptide drugs encountered in traditional top-down methods, such as milling down and high-pressure homogenization. In this study, Pluronic® L64 (L64) was chosen as a surfactant to prepare the EXE-RM pMDI formulations with the assistance of ethanol. The results showed RM possessed a particle size of 123.80 ± 2.91 nm with 0.121 ± 0.024 PdI and a satisfied fine-particle fraction of 41.30 ± 3.73% measured by a next-generation impactor. In addition, the dispersion stability of RM pMDI was maintained after storage at 4 °C for 50 days. The secondary structure of EXE was maintained during the preparation process. Moreover, the results indicated that L64 was compatible with cells and could improve the penetration of EXE through cell monolayers. Through the liquid-based bottom-up method, EXE-RM pMDI was successfully prepared and exhibited favorable stability and aerodynamic performance. This study offers a preparation strategy to enhance the stability of peptides in pMDIs.

Protein Nanoparticles Promote Microparticle Formation in Intravenous Immunoglobulin Solutions During Freeze-Thawing and Agitation Stresses

In this study, we investigated the potential roles of nanoparticles (<100 nm) and submicron (100-1000 nm) particles in the formation of microparticles (>1000 nm) in protein formulations under some pharmaceutically relevant stress conditions. Exposure of intravenous immunoglobulin solutions to the interface-associated stresses of freeze-thawing or agitation resulted in relatively large increases in microparticle concentrations, which depended directly on the levels of pre-existing nano- and submicron particles. Thus, agglomeration of nanoparticles and submicron particles appears to play a role in microparticle formation under these stresses. In contrast, increases in microparticle concentrations during quiescent incubation at elevated temperatures were independent of the initial nano- and submicron particle concentrations in solution.

Impact of Buffer, Protein Concentration and Sucrose Addition on the Aggregation and Particle Formation during Freezing and Thawing

Purpose

This study addresses the effect of freezing and thawing on a therapeutic monoclonal antibody (mAb) solution and the corresponding buffer formulation. Particle formation, crystallization behaviour, morphology changes and cryo-concentration effects were studied after varying the freezing and thawing rates, buffer formulation and protein concentration. The impact of undergoing multiple freeze/thaw (FT)-cycles at controlled and uncontrolled temperature rates on mAb solutions was investigated in terms of particle formation.

Methods

Physicochemical characteristics were analysed by Differential Scanning Calorimetry whereas morphology changes are visualized by cryomicroscopy measurements. Micro Flow Imaging, Archimedes and Dynamic Light Scattering were used to investigate particle formation.

Results

Data retrieved in the present study emphasizes the damage caused by multiple FT-cyles and the need for sucrose as a cryoprotectant preventing cold-crystallization specifically at high protein concentrations. Low protein concentrations cause an increase of micron particle formation. Low freezing rates lead to a decreased particle number with increased particle diameter.

Conclusion

The overall goal of this research is to gain a better understanding of the freezing and thawing behaviour of mAb solutions with the ultimate aim to optimize this process step by reducing the unwanted particle formation, which also includes protein aggregates.

Effect of Surfactants on Mechanical, Thermal, and Photostability of a Monoclonal Antibody

The purpose of this work was to evaluate the effect of commonly used surfactants (at 0.01% w/v concentration) on mechanical, thermal, and photostability of a monoclonal antibody (MAb1) of IgG1 sub-class and to evaluate the minimum concentration of surfactant (Polysorbate 80) required in protecting MAb1 from mechanical stress. Surfactants evaluated were non-ionic surfactants, Polysorbate 80, Polysorbate 20, Pluronic F-68 (polyoxyethylene-polyoxypropylene block polymer), Brij 35 (polyoxyethylene lauryl ether), Triton X-100, and an anionic surfactant, Caprylic acid (1-Heptanecarboxylic acid). After evaluating effect of surfactants and determining stabilizing effect of Polysorbate 80 against mechanical stress without compromising thermal and photostability of MAb1, the minimum concentration of Polysorbate 80 required for mechanical stability was further examined. Polysorbate 80 concentration was varied from 0 to 0.02%. Mechanical stability was evaluated by agitation of MAb1 at 300 rotations per minute at room temperature for 72 h. Samples were analyzed for purity by SEC-HPLC, turbidity by absorbance at 350 nm, visible particles by visual inspection, and sub-visible particles by light obscuration technique on a particle analyzer. All non-ionic surfactants tested showed a similar effect in protecting against mechanical stress and did not exhibit any significant negative effect on thermal and photostability. However, Caprylic acid had a slightly negative effect on mechanical and photostability when compared to the non-ionic surfactants or sample without surfactant. This work demonstrated that polysorbate 80 is better than other surfactants tested and that a concentration of at least 0.005% (w/v) Polysorbate 80 is needed to protect MAb1 against mechanical stress.