Superstructure of TiO2 Crystalline Nanoparticles Yields Effective Conduction Pathways for Photogenerated Charges

Efficient Exciton Dissociation through the Edge Interfacial State in Metal Halide Perovskite-Based Photocatalysts

Metal halide perovskites (MHPs) with superior optoelectronic properties have recently been actively pursued as catalysts in heterogeneous photocatalysis. Dissociating excitons into charge carriers holds the key to enhancing the photocatalytic performance of MHP-based photocatalysts, especially for those with strong quantum-confinement effects. However, attaining efficient exciton dissociation has been rather challenging. Herein, we propose a novel concept that the edge interfacial state can trigger anisotropic electron transfer to promote exciton dissociation. By taking Cs₄PbBr₆/TiO₂ mesocrystal heterojunction as a proof-of-concept, we demonstrate that the unique interfacial state at the edge of the system is generated by the defect-mediated chemical interaction and acts as a trap state, which brings on a directionally favored electron transfer from the center to edge regions, thereby significantly enhancing the desired exciton dissociation. Consequently, such a system achieves an excellent performance in photocatalytic CO₂ reduction. This paradigmatic work sheds light on the excitonic aspects for rational design of advanced photocatalysts toward high performance.

Interdependence of Kinetics and Fluid Dynamics in the Design of Photocatalytic Membrane Reactors

Photocatalytic membrane reactors (PMRs) are a promising technology for wastewater reclamation. The principles of PMRs are based on photocatalytic degradation and membrane rejection, the different processes occurring simultaneously. Coupled photocatalysis and membrane filtration has made PMRs suitable for application in the removal of emerging contaminants (ECs), such as diclofenac, carbamazepine, ibuprofen, lincomycin, diphenhydramine, rhodamine, and tamoxifen, from wastewater, while reducing the likelihood of byproducts being present in the permeate stream. The viability of PMRs depends on the hypotheses used during design and the kinetic properties of the systems. The choice of design models and the assumptions made in their application can have an impact on reactor design outcomes. A design’s resilience is due to the development of a mathematical model that links material and mass balances to various sub-models, including the fluid dynamic model, the radiation emission model, the radiation absorption model, and the kinetic model. Hence, this review addresses the discrepancies with traditional kinetic models, fluid flow dynamics, and radiation emission and absorption, all of which have an impact on upscaling and reactor design. Computational and analytical descriptions of how to develop a PMR system with high throughput, performance, and energy efficiency are provided. The potential solutions are classified according to the catalyst, fluid dynamics, thickness, geometry, and light source used. Two main PMR types are comprehensively described, and a discussion of various influential factors relating to PMRs was used as a premise for developing an ideal reactor. The aim of this work was to resolve potential divergences that occur during PMRs design as most real reactors do not conform to the idealized fluid dynamics. Lastly, the application of PMRs is evaluated, not only in relation to the removal of endocrine-disrupting compounds (EDCs) from wastewater, but also in dye, oil, heavy metals, and pesticide removal.

Impact of Nanoparticle Consolidation on Charge Separation Efficiency in Anatase TiO2 Films

Mesoporous films and electrodes were prepared from aqueous slurries of isolated anatase TiO₂ nanoparticles. The resulting layers were annealed in air at temperatures 100°C ≤ T ≤ 450°C upon preservation of internal surface area, crystallite size and particle size. The impact of processing temperature on charge separation efficiency in nanoparticle electrodes was tracked via photocurrent measurements in the presence of methanol as a hole acceptor. Thermal annealing leads to an increase of the saturated photocurrent and thus of the charge separation efficiency at positive potentials. Furthermore, a shift of capacitive peaks in the cyclic voltammograms of the nanoparticle electrodes points to the modification of the energy of deep traps. Population of these traps triggers recombination possibly due to the action of local electrostatic fields attracting photogenerated holes. Consequently, photocurrents saturate at potentials, at which deep traps are mostly depopulated. Charge separation efficiency was furthermore investigated for nanoparticle films and was tracked via the decomposition of hydrogen peroxide. Our observations evidence an increase of charge separation efficiency upon thermal annealing. The effect of particle consolidation, which we associate with minute atomic rearrangements at particle/particle contacts, is attributed to the energetic modification of deep traps and corresponding modifications of charge transport and recombination, respectively.

Unprecedented Ag-Cu2O composited mesocrystals with efficient charge separation and transfer as well as visible light harvesting for enhanced photocatalytic activity

Mesocrystals with highly ordered subunits can provide good charge transfer tunnels and more active sites for catalytic reactions. So far, single-component mesocrystals have been well-developed in metals or metal oxides in the past decades, but the construction of mesocrystals in nanocomposites has been a great challenge. Herein we demonstrated a simple, one-pot wet chemical strategy for the preparation of plate-like Ag-Cu2O composited mesocrystals (CMCs) without any organic capping agent, which broke through the traditional dependence on organic capping agents for the synthesis of mesocrystals. As expected, these unprecedented Ag-Cu2O CMCs displayed superior visible-light-driven photodegradation performance toward tetracycline solution compared to the core-shell Ag@Cu2O and pure Cu2O photocatalysts. The improved photocatalytic activity of Ag-Cu2O CMCs could be ascribed to the synergistic effect of an ordered crystallographic orientation, the Schottky barrier and localized surface plasmon resonance (LSPR) for simultaneously enhancing charge separation and transfer as well as visible light harvesting. This research might stimulate in-depth investigations on the exploration of new synthetic methods for the design and construction of novel composited mesocrystals.

Facile one-step hydrothermal synthesis of single-crystalline SnNb2O6 nanosheets with greatly extended visible-light response for enhanced photocatalytic performance and mechanism insight

The conventional preparation of SnNb₂O₆ invariably involves complex and laborious steps, which unavoidably introduces defect into the host lattice and also increases the reaction period and costs, resulting in undesired recombination of photo-generated electron-hole pairs. For the first time in this work, we manage to synthesize single-crystalline two-dimensional (2D) SnNb₂O₆ nanosheets with ultrathin structure through a facile one-step hydrothermal method. Comparative studies were explored to analyze the structure and phase evolution during the preparation course. The synthesized 2D structure demonstrated a narrower band gap of 2.09 eV and specific surface area of 76.1 m² g^-1, which exhibited significantly extended visible-light-responsive range and larger surface area by contrast with the state-of-the-art reports, resulting in excellent visible-light-driven photoactivity towards H₂ production and water purification as well. Additionally, further enhanced photocatalytic performance was achieved by the incorporation of Pt as co-catalyst to indirectly indicate the advantage of the SnNb₂O₆ nanosheets in this method over other reported counterparts. It was found that, a very small amount of Pt loaded on the surface of SnNb₂O₆ nanosheets would contribute to remarkably higher activity than pure SnNb₂O₆ nanosheets and exhibit superior stability as well. Moreover, a deep insight into the underlying photocatalytic mechanism was proposed. This work sheds light on a new facile way to fabricate high-performance photocatalytic materials and provided new opportunities for solar-energy conversion.

Surface engraving engineering of polyhedral photocatalysts

Surface engraving engineering of polyhedral photocatalysts is overviewed based on synthetic strategies and engraved surface-related photocatalytic mechanisms. Some challenges and perspectives are also proposed.

Visible-Light Photocatalysts and Their Perspectives for Building Photocatalytic Membrane Reactors for Various Liquid Phase Chemical Conversions

Photocatalytic organic synthesis/conversions and water treatment under visible light are a challenging task to use renewable energy in chemical transformations. In this review a brief overview on the mainly employed visible light photocatalysts and a discussion on the problems and advantages of Vis-light versus UV-light irradiation is reported. Visible light photocatalysts in the photocatalytic conversion of CO2, conversion of acetophenone to phenylethanol, hydrogenation of nitro compounds, oxidation of cyclohexane, synthesis of vanillin and phenol, as well as hydrogen production and water treatment are discussed. Some applications of these photocatalysts in photocatalytic membrane reactors (PMRs) for carrying out organic synthesis, conversion and/or degradation of organic pollutants are reported. The described cases show that PMRs represent a promising green technology that could shift on applications of industrial interest using visible light (from Sun) active photocatalysts.

TiO2 superstructures with oriented nanospaces: a strategy for efficient and selective photocatalysis

Highly ordered superstructures of semiconductor nanocrystals contain abundant nanometer-scale pores between the crystals; however, there have been difficulties in controlling the size and orientation of these nanospaces without the use of a template or a capping reagent. This constraint has affected their development and applications in potential fields including catalysis and optoelectronics adversely. In this study, we synthesized a rod-shaped TiO2 mesocrystal (TMC) having a length of a few hundreds of micrometers and comprising regularly ordered anatase TiO2 nanocrystals that form oriented nanospaces by exposed {001} facets. Finite-difference time-domain (FDTD) calculations of electric fields and in situ fluorescence imaging with a polarization sensitive dye on a single mesocrystal were performed to reveal anisotropic adsorption and excitation of the dyes. Furthermore, the photodegradation of the dyes was found to be more facilitated in nanospaces formed by the specific facets, as compared with the dyes randomly adsorbed on the outer surfaces. Consequently, the selectivity of photocatalytic reactions based on the molecular size and redox was enhanced by introducing the concept of oriented nanospace.

Mesocrystalline Ta3N5 superstructures with long-lived charges for improved visible light photocatalytic hydrogen production

Highly ordered mesocrystalline semiconductors often indicate tremendous prospects in the clean energy production and environmental photocatalysis mainly because of their unique superstructure for efficient charge transport pathways and long-lived charges. Here, superstructure Ta₃N₅ mesocrystals with the high-energy surface {2 0 0} planes exposed were the first time to be successfully fabricated by topological transformation of Ta₂O₅ mesocrystals. The prepared Ta₃N₅ mesocrystals showed enhanced visible-light photocatalytic hydrogen production activity of 98.67 μmol g^-1 for 180 min irradiation, which was approximately 5.28 times that of comm-Ta₃N₅ prepared with commercial Ta₂O₅ as the starting material, mainly due to the formation of long-distance electron conduction pathways and long-lived charges. The detailed electronic band structures of the prepared Ta₃N₅ mesocrystals were also investigated by electrochemical method. Finally, possible visible-light photocatalytic mechanisms of Ta₃N₅ mesocrystals for enhanced hydrogen production was also proposed in detail. Current work also indicates that tantalum-based mesocrystals show great potential to enhance the charge separation for efficient photocatalytic water splitting.

Carbon dot-based composites for catalytic applications

We summarize the construction methods and influencing factors of CDs-based composites and discuss their catalytic applications, including photocatalysis, chemical catalysis, peroxidase-like catalysis, Fenton-like catalysis and electrocatalysis.

Van der Waals Integrated Hybrid POM-Zirconia Flexible Belt-Like Superstructures

A facile one-step solvothermal approach to engineer a van der Waals integrated heteromaterial self-assembled superstructure composed of two structurally distinct species that is polyoxomolybdate and zirconia (POM-ZrO₂ ) is reported. Nonclassical aggregation-based self-assembly process grows the superstructure. The introduced POM not only behaves as a catalytically active component of the hybrid structure but also imparts flexibility to the developed POM-ZrO₂ superstructures. The material shows high performance toward oxygenation of thioethers as a result of its morphology, composition, and structure. This growing strategy may introduce a viable pathway to the rational design of Van der Waals integrated complex hybrid, catalytically active assemblies with potential applications in different fields.

Self-Assembly of Ultrathin Nanocrystals to Multidimensional Superstructures

The self-assembly of ultrathin nanocrystals (UTNCs) into well-organized multidimensional superstructures is one of the key topics in material chemistry and physics. Highly ordered nanocrystal assemblies also known as superstructures or synthetic structures have remained a focus for researchers over the past few years due to synergy in their properties as compared to their components. Here, we aim to present the recent progress being made in this field with highlights of our research group endeavors in the engineering of self-assembled complex multidimensional superstructures of various inorganic materials, including polyoxometalates. The driving forces for the assembly process and its kinetics along with the potential applications associated with these unique ordered and spatially complex superstructures are also discussed.

Hollow, Rough, and Nitric Oxide-Releasing Cerium Oxide Nanoparticles for Promoting Multiple Stages of Wound Healing

Wound healing is a complex and sequential biological process that involves multiple stages. Although various nanomaterials are applied to accelerate the wound healing process, only a single stage is promoted during the process, lacking hierarchical stimulation. Herein, hollow CeO₂ nanoparticles (NPs) with rough surface and l-arginine inside (_Ah CeO₂ NPs) are developed as a compact and programmable nanosystem for sequentially promoting the hemostasis, inflammation, and proliferation stages. The rough surface of _Ah CeO₂ NPs works as a nanobridge to rapidly closure the wounds, promoting the hemostasis stage. The hollow structure of _Ah CeO₂ NPs enables the multireflection of light inside particles, significantly enhancing the light harvest efficiency and electron-hole pair abundance. Simultaneously, the porous shell of _Ah CeO₂ NPs facilitates the electron-hole separation and reactive oxygen species production, preventing wound infection and promotion wound healing during the inflammation stage. The enzyme mimicking property of _Ah CeO₂ NPs can alleviate the oxidative injury in the wound, and the released l-arginine can be converted into nitric oxide (NO) under the catalysis of inducible NO synthase, both of which promote the proliferation stage. A series of in vitro and in vitro biological assessments corroborate the effectiveness of _Ah CeO₂ NPs in the wound healing process.

Rational Design of Photoelectrodes with Rapid Charge Transport for Photoelectrochemical Applications

Photoelectrode materials are the heart of photoelectrochemical (PEC) cells, which hold great promise to address global energy and environmental issues by converting solar energy into electricity or chemical fuels. In recent decades, significant research efforts have been devoted to the design and construction of photoelectrodes for the efficient generation and utilization of charge carriers to boost PEC performance. Herein, insights from a literature study on the relationship between the architecture and charge dynamics of photoelectrodes are presented. After briefly introducing the fundamental theories of charge dynamics in nanostructured photoelectrodes, the development of photoelectrode design in 1D polycrystalline nanotube arrays, 1D single-crystalline nanowire arrays, and hierarchical and mesoporous nanowire arrays is reviewed with a focus on the interplay between architecture and charge transport properties. For each design, commonly used synthetic approaches and the corresponding charge transport properties are discussed. Subsequently, the applications of these photoelectrodes in PEC systems are summarized. In conclusion, future challenges in the rational design of photoelectrode architecture are presented. The basic relationships between the architectures and charge dynamics of photoelectrode materials discussed here are expected to provide pertinent guidance and a reference for future advanced material design targeting improved light energy conversion systems.

Oxygen-Deficient Dumbbell-Shaped Anatase TiO2-x Mesocrystals with Nearly 100 % Exposed {101} Facets: Synthesis, Growth Mechanism, and Photocatalytic Performance

The development of hierarchical TiO₂ superstructures with new morphologies and intriguing photoelectric properties for utilizing solar energy is known to be an effective approach to alleviate the serious problems of environmental pollution. Herein, unique oxygen-deficient dumbbell-shaped anatase TiO_2-x mesocrystals (DTMCs) enclosed by nearly 100 % {101} facets were readily synthesized by mesoscale transformation in TiCl₃ /acetic acid (HAc) mixed solution, followed by calcination under vacuum. These mesocrystals exhibited much higher photoreactivity toward removing the model pollutants methyl orange and Cr^VI than truncated tetragonal bipyramidal anatase nanocrystals (TNCs), anatase mesocrystals built from truncated tetragonal bipyramidal anatase nanocrystals (TTMCs), and anatase mesocrystals constructed by anatase nanocrystals with nearly 100 % exposed {101} facets (TMCs), revealing that both the oxidation and reduction abilities of anatase TiO₂ were simultaneously enhanced upon fabricating an oxygen-deficient mesocrystalline architecture with about 100 % exposed {101} facets. Further characterization illustrated that such an enhancement of photoreactivity was mainly due to the strengthened light absorption, boosted charge carrier separation, and nearly 100 % exposed {101} facets of the oxygen-deficient dumbbell-shaped anatase mesocrystals. This work will be useful for guiding the synthesis of oxygen-deficient ordered superstructures of metal oxides with desired morphologies and exposed facets for promising applications in environmental remediation.

Titanium Dioxide (TiO2) Mesocrystals: Synthesis, Growth Mechanisms and Photocatalytic Properties

Hierarchical TiO2 superstructures with desired architectures and intriguing physico-chemical properties are considered to be one of the most promising candidates for solving the serious issues related to global energy exhaustion as well as environmental deterioration via the well-known photocatalytic process. In particular, TiO2 mesocrystals, which are built from TiO2 nanocrystal building blocks in the same crystallographical orientation, have attracted intensive research interest in the area of photocatalysis owing to their distinctive structural properties such as high crystallinity, high specific surface area, and single-crystal-like nature. The deeper understanding of TiO2 mesocrystals-based photocatalysis is beneficial for developing new types of photocatalytic materials with multiple functionalities. In this paper, a comprehensive review of the recent advances toward fabricating and modifying TiO2 mesocrystals is provided, with special focus on the underlying mesocrystallization mechanism and controlling rules. The potential applications of as-synthesized TiO2 mesocrystals in photocatalysis are then discussed to shed light on the structure–performance relationships, thus guiding the development of highly efficient TiO2 mesocrystal-based photocatalysts for certain applications. Finally, the prospects of future research on TiO2 mesocrystals in photocatalysis are briefly highlighted.

Mesocrystals for photocatalysis: a comprehensive review on synthesis engineering and functional modifications

Mesocrystals are a new class of superstructures that are generally made of crystallographically highly ordered nanoparticles and could function as intermediates in a non-classical particle-mediated aggregation process. In the past decades, extensive research interest has been focused on the structural and morphogenetic aspects, as well as the growth mechanisms, of mesocrystals. Unique physicochemical properties including high surface area and ordered porosity provide new opportunities for potential applications. In particular, the oriented interfaces in mesocrystals are considered to be beneficial for effective photogenerated charge transfer, which is a promising photocatalytic candidate for promoting charge carrier separation. Only recently, remarkable advances have been reported with a special focus on TiO2 mesocrystal photocatalysts. However, there is still no comprehensive overview on various mesocrystal photocatalysts and their functional modifications. In this review, different kinds of mesocrystal photocatalysts, such as TiO2 (anatase), TiO2 (rutile), ZnO, CuO, Ta2O5, BiVO4, BaZrO3, SrTiO3, NaTaO3, Nb3O7(OH), In2O3-x (OH) y , and AgIn(WO4)2, are highlighted based on the synthesis engineering, functional modifications (including hybridization and doping), and typical structure-related photocatalytic mechanisms. Several current challenges and crucial issues of mesocrystal-based photocatalysts that need to be addressed in future studies are also given.

Formation of an oriented Bi2WO6 photocatalyst induced by in situ Bi reduction and its use for efficient nitrogen fixation

An in situ Bi reduction strategy to induce a preferential orientation that significantly enhanced the photocatalytic nitrogen fixation performance of Bi₂WO₆.

Defective Anatase TiO2-x Mesocrystal Growth In Situ on g-C3 N4 Nanosheets: Construction of 3D/2D Z-Scheme Heterostructures for Highly Efficient Visible-Light Photocatalysis

Environmental remediation by employing visible-light-active semiconductor heterostructures provides effective solutions for handling emerging contaminants by a much greener and lower cost approach compared with other methods. This report demonstrates that the in situ growth of nanosized single-crystal-like defective anatase TiO_2-x mesocrystals (DTMCs) on g-C₃ N₄ nanosheets (NSs) can produce a 3D/2D DTMC/g-C₃ N₄ NS heterostructure with the two components held together by chemical bonds to form tight interfaces. This nanostructured heterostructure displayed remarkably improved photocatalytic activity toward the removal of the model pollutants Methyl Orange (MO) and Cr^VI under visible-light irradiation in comparison with the pristine DTMC and g-C₃ N₄ NS components, which suggests that both the oxidation and reduction abilities of the DTMC/g-C₃ N₄ NSs were simultaneously enhanced after fabrication. On the basis of the results of a systematic characterization, a reasonable mechanism for the photocatalytic activity based on a direct Z-scheme heterojunction is proposed and further verified by the measurement of ^. OH. This novel Z-scheme heterojunction endows the heterostructure with improved photogenerated electron/hole pair separation and a strong redox ability for the efficient degradation of wastewater pollutants. This work will be useful for the design and fabrication of direct Z-scheme heterostructured photocatalysts with novel architectures for applications in energy conversion and environmental remediation.

Construction of Indium and Cerium Codoped Ordered Mesoporous TiO2 Aerogel Composite Material and Its High Photocatalytic Activity

In this study, ordered mesoporous In2O3-CeO2/TiO2 aerogel composite material is fabricated via a sol-gel method. According to the preparation process of the aerogel, different weight percentages Ce(NO3)3 and In(NO3)3 are dissolved in the solvent, which would be completely dispersed in the porous gel when the system completely becomes gel. The prepared materials are used to degrade the Rhodamine B (Rh B) under visible light irradiation. 0.2 wt% In2O3-0.2 wt% CeO2/TiO2 (In0.2-Ce0.2/TiO2) sample has the highest degradation rate which reaches to 96.20%. When degradation time is continuously increased to 110 min, the degradation efficiency of In0.2-Ce0.2/TiO2 sample is basically retained. The prepared In0.2-Ce0.2/TiO2 sample has much better stability and reproducibility under visible light irradiation, the photocatalytic degradation efficiency of In0.2-Ce0.2/TiO2 sample is still stable at more than 90% after the five times cycle.

Photoexcited charge carrier dynamics of interconnected TiO2 nanoparticles: evidence of enhancement of charge separation at anatase–rutile particle interfaces

Hydrothermal treatment can improve the charge separation efficiency of P25.

Superstructure Ta2O5 mesocrystals derived from (NH4)2Ta2O3F6 mesocrystals with efficient photocatalytic activity

Superstructured mesocrystalline Ta₂O₅ nanosheets were successfully prepared from mesocrystalline (NH₄)₂Ta₂O₃F₆ nanorods by the annealing method.

g-C3N4/TiO2 Mesocrystals Composite for H2 Evolution under Visible-Light Irradiation and Its Charge Carrier Dynamics

The photocatalytic performance of graphitic carbon nitride (g-C₃N₄) has been limited to low efficiency due to fast charge recombination. Here, we constructed g-C₃N₄ nanosheets/TiO₂ mesocrystals metal-free composite (g-C₃N₄ NS/TMC) to promote the efficiency of charge separation. The photocatalytic H₂ evolution experiments indicate that coupling g-C₃N₄ NS with TMC increases photogenerated charge carriers in g-C₃N₄ NS/TMC composite due to efficient charge separation. g-C₃N₄ NS (31 wt %)/TMC shows the highest photocatalytic activity and the corresponding H₂ evolution rate is 3.6 μ mol h^-1. This value is 20 times larger than that of g-C₃N₄ NS without any noble metal cocatalyst under visible-light irradiation (λ > 420 nm). The photocatalytic activity of g-C₃N₄ NS/TMC (3.6 μmol h^-1) is 7 times higher than that of g-C₃N₄ NS/P25 (0.5 μ mol h^-1), confirming the importance of strong interface interaction between two-dimensional g-C₃N₄ NS and plate-shape TMC. Femtosecond time-resolved diffuse reflectance (fs-TDR) was employed to study the fundamental photophysical processes of bulk g-C₃N₄, g-C₃N₄ NS, and g-C₃N₄/TMC composite which are essential to explain the photocatalytic activity. Using fs-TDR, we demonstrate that the photocatalytic activity depends on the increased driving force for photoinduced electron transfer and a higher percentage of photogenerated charges.

Enhanced photoreduction of Cr(vi) and photooxidation of NO over TiO2−x mesoporous single crystals

The extended wide-spectrum absorption and the high-active holes and electrons on Ti³⁺-MSCs lead to the high decontamination ability and an improved selectivity of NO₂ in the NOx photo-oxidation process.

Synthesis of plasmonic Ti3+ doped Au/Cl-TiO2 mesocrystals with enhanced visible light photocatalytic activity

We successfully synthesized willow leaf-like plasmonic Ti³⁺ doped Au/Cl-TiO₂ mesocrystals by facile modified two-phase vapor hydrolysis and photoreduction methods.

Controllable nanothorns on TiO2mesocrystals for efficient charge separation in hydrogen evolution

Herein, we investigated that sheet-like TiO₂mesocrystals with controllable nanothorns on the {101} facet during the topotactic transformation exhibit facet-induced charge separation and anisotropic electron flow, realizing the superior facet-dependent photocatalysis in solar energy conversion.

Nanoparticle Clusters: Assembly and Control Over Internal Order, Current Capabilities, and Future Potential

The current state of the art in the use of colloidal methods to form nanoparticle assemblies, or clusters (NPCs) is reviewed. The focus is on the two-step approach, which exploits the advantages of bottom-up wet chemical NP synthesis procedures, with subsequent colloidal destabilization to trigger assembly in a controlled manner. Recent successes in the application of functional NPCs with enhanced emergent collective properties for a wide range of applications, including in biomedical detection, surface enhanced Raman scattering (SERS) enhancement, photocatalysis, and light harvesting, are highlighted. The role of the NP-NP interactions in the formation of monodisperse ordered clusters is described and the different assembly processes from a wide range of literature sources are classified according to the nature of the perturbation from the initial equilibrium state (dispersed NPs). Finally, the future for the field and the anticipated role of computational approaches in developing next-generation functional NPCs are briefly discussed.

In Situ Fluorine Doping of TiO2 Superstructures for Efficient Visible-Light Driven Hydrogen Generation

With the aid of breakthroughs in nanoscience and nanotechnology, it is imperative to develop metal oxide semiconductors through visible light-driven hydrogen generation. In this study, TiOF2 was incorporated as an n-type F-dopant source to TiO2 mesocrystals (TMCs) with visible-light absorption during the topotactic transformation. The crystal growth, structural change, and dynamic morphological evolution, from the initial intermediate NH4 TiOF3 to HTiOF3, TiOF2, and F-doped TMCs, were verified through in situ temperature-dependent techniques to elucidate the doping mechanism from intermediate TiOF2. The visible-light efficiencies of photocatalytic hydrogen were dependent on the contents of the dopant as compared with the pure TMC and a controled reference. Using femtosecond time-resolved diffuse reflectance spectroscopy, the charge-transfer dynamics were monitored to confirm the improvement of charge separation after doping.

Remarkable Charge Separation and Photocatalytic Efficiency Enhancement through Interconnection of TiO2 Nanoparticles by Hydrothermal Treatment

Although tremendous effort has been directed to synthesizing advanced TiO2 , it remains difficult to obtain TiO2 exhibiting a photocatalytic efficiency higher than that of P25, a benchmark photocatalyst. P25 is composed of anatase, rutile, and amorphous TiO2 particles, and photoexcited electron transfer and subsequent charge separation at the anatase-rutile particle interfaces explain its high photocatalytic efficiency. Herein, we report on a facile and rational hydrothermal treatment of P25 to selectively convert the amorphous component into crystalline TiO2 , which is deposited between the original anatase and rutile particles to increase the particle interfaces and thus enhance charge separation. This process produces a new TiO2 exhibiting a considerably enhanced photocatalytic efficiency. This method of synthesizing this TiO2 , inspired by a recently burgeoning zeolite design, promises to make TiO2 applications more feasible and effective.