Penetration Barrier of Water through Graphynes' Pores: First-Principles Predictions and Force Field Optimization

Space-Confined Synthesis of Monolayer Graphdiyne in MXene Interlayer

Graphdiyne (GDY) is an artificial carbon allotrope that is conceptually similar to graphene but composed of sp- and sp2 -hybridized carbon atoms. Monolayer GDY (ML-GDY) is predicted to be an ideal 2D semiconductor material with a wide range of applications. However, its synthesis has posed a significant challenge, leading to difficulties in experimentally validating theoretical properties. Here, it is reported that in situ acetylenic homocoupling of hexaethynylbenzene within the sub-nanometer interlayer space of MXene can effectively prevent out-of-plane growth or vertical stacking of the material, resulting in ML-GDY with in-plane periodicity. The subsequent exfoliation process successfully yields free-standing GDY monolayers with micrometer-scale lateral dimensions. The fabrication of field-effect transistor on free-standing ML-GDY makes the first measurement of its electronic properties possible. The measured electrical conductivity (5.1 × 103 S m-1 ) and carrier mobility (231.4 cm2 V-1 s-1 ) at room temperature are remarkably higher than those of the previously reported multilayer GDY materials. The space-confined synthesis using layered crystals as templates provides a new strategy for preparing 2D materials with precisely controlled layer numbers and long-range structural order.

Prospects of 2D graphdiynes and their applications in desalination and wastewater remediation

Water is an indispensable part of human life that affects health and food intake. Water pollution caused by rapid industrialization, agriculture, and other human activities affects humanity. Therefore, researchers are prudent and cautious regarding the use of novel materials and technologies for wastewater remediation. Graphdiyne (GDY), an emerging 2D nanomaterial, shows promise in this direction. Graphdiyne has a highly symmetrical π-conjugated structure consisting of uniformly distributed pores; hence, it is favorable for applications such as oil-water separation and organic-pollutant removal. The acetylenic linkage in GDY can strongly interact with metal ions, rendering GDY applicable to heavy-metal adsorption. In addition, GDY membranes that exhibit 100% salt rejection at certain pressures are potential candidates for wastewater treatment and water reuse via desalination. This review provides deep insights into the structure, properties, and synthesis methods of GDY, owing to which it is a unique, promising material. In the latter half of the article, various applications of GDY in desalination and wastewater treatment have been detailed. Finally, the prospects of these materials have been discussed succinctly.

Ab initio study of water anchored in graphene pristine and vacancy-type defects

CONTEXT

In this paper, we have addressed two issues that are relevant to the interaction of water in pristine and vacant graphene through first-principles calculations based on the Density Functional Theory (DFT). The results showed that for the interaction of pristine graphene with water, the DOWN configuration (with the hydrogen atoms facing downwards) was the most stable, presenting binding energies in the order of -13.62 kJ/mol at a distance of 2.375 Å in the TOP position. We also evaluated the interaction of water with two vacancy models, removing one carbon atom (Vac-1C) and four atoms (Vac-4C). In the Vac-1C system, the most favourable system was the DOWN configuration, with binding energies ranging from -20.60 kJ/mol to -18.41 kJ/mol in the TOP and UP positions, respectively. A different behaviour was observed for the interaction of water with Vac-4C; regardless of the configuration of the water, it is always more favourable for the interaction to occur through the vacancy centre, with binding energies ​​between -13.28 kJ/mol and -20.49 kJ/mol. Thus, the results presented open perspectives for the technological development of nanomembranes as well as providing a better understanding of the wettability effects of graphene sheets, whether pristine or with defects.

METHOD

We evaluated the interaction of pristine and vacant graphene with the water molecule, through calculations based on Density Functional Theory (DFT); implemented by the SIESTA program. The electronic, energetic, and structural properties were analyzed by solving self-consistent Kohn-Sham equations. In all calculations, a double ζ plus a polarized function (DZP) was used for the numerical baise set. Local Density Approximation (LDA) with the Perdew and Zunger (PZ) parameterisation along with a basis set superposition error (BSSE) correction were used to describe the exchange and correlation potential (Vxc). The water and isolated graphene structures were relaxed until the residual forces were less than 0.05 eV/Å^-1 in all atomic coordinates.

Chirality Effects and Semiconductor versus Metallic Nature in Halide Nanotubes

A density functional theory study of the electronic structure of nanostructures based on the hexagonal layers of LuI₃ is reported. Both bulk and slabs with one to three layers exhibit large and indirect bandgaps. Different families of nanotubes can be generated from these layers. Semiconducting nanotubes of two different chiralities have been studied. The direct or indirect nature of the optical gaps depends on the chirality, and a simple rationalization of this observation based on band folding arguments is provided. Remarkably, a metastable form of the armchair LuI₃ nanotubes can be obtained under a structural rearrangement such that some iodine atoms are segregated toward the center of the nanotube forming chains of dimerized iodines. These nanotubes having an Lu_2N I_5N backbone are predicted to be metallic and should be immune toward a Peierls distortion. The iodine chains in the inner part of the nanotubes are weakly bound to the backbone so that it should be possible to remove these chains to generate a new series of neutral Lu_2N I_5N nanotubes which could exhibit interesting magnetic behavior. Because the LuI₃ structure occurs for a large number of lanthanide and actinide trihalides, a tuning of the optical, transport, and probably magnetic properties of these new families of nanotubes can be a challenging prospect for future experimental studies.

Graphynes and Graphdiynes for Energy Storage and Catalytic Utilization: Theoretical Insights into Recent Advances

Carbon allotropes have contributed to all aspects of people's lives throughout human history. As emerging carbon-based low-dimensional materials, graphyne family members (GYF), represented by graphdiyne, have a wide range potential applications due to their superior physical and chemical properties. In particular, graphdiyne (GDY), as the leader of the graphyne family, has been practically applied to various research fields since it was first successfully synthesized. GYF have a large surface area, both sp and sp² hybridization, and a certain band gap, which was considered to originate from the overlap of carbon 2p_z orbitals and the inhomogeneous π-bonds of carbon atoms in different hybridization forms. These properties mean GYF-based materials still have many potential applications to be developed, especially in energy storage and catalytic utilization. Since most of the GYF have yet to be synthesized and applications of successfully synthesized GYF have not been developed for a long time, theoretical results in various application fields should be shared to experimentalists to attract more intentions. In this Review, we summarized and discussed the synthesis, structural properties, and applications of GYF-based materials from the theoretical insights, hoping to provide different viewpoints and comments.

Recent advances on graphyne and its family members as membrane materials for water purification and desalination

Graphyne and its family members (GFMs) are allotropes of carbon (a class of 2D materials) having unique properties in form of structures, pores and atom hybridizations. Owing to their unique properties, GFMs have been widely utilized in various practical and theoretical applications. In the past decade, GFMs have received considerable attention in the area of water purification and desalination, especially in theoretical and computational aspects. More recently, GFMs have shown greater prospects in achieving optimal separation performance than the experimentally derived commercial polyamide membranes. In this review, recent theoretical and computational advances made in the GFMs research as it relates to water purification and desalination are summarized. Brief details on the properties of GFMs and the commonly used computational methods were described. More specifically, we systematically reviewed the various computational approaches employed with emphasis on the predicted permeability and selectivity of the GFM membranes. Finally, the current challenges limiting their large-scale practical applications coupled with the possible research directions for overcoming the challenges are proposed.

Graphdiyne applications in sensors: A bibliometric analysis and literature review

Graphdiyne is a two-dimensional carbon nanomaterial synthesized artificially in 2010. Its outstanding performance is considered to have great potential in different fields. This article summarizes the work of graphdiyne in the sensing field by literature summary and bibliometrics analysis. The development of graphdiyne in the field of sensing has gone through a process from theoretical calculation to experimental verification. Especially in the last three years, there has been very rapid development. The theoretical calculations suggest that graphdiyne is an excellent gas sensing material, but there is little experimental evidence in this direction. On the contrary, graphdiyne has been widely reported in the field of electrochemical sensing. At the same time, graphdiyne can also be used as a molecular switch for DNA sequencing. Fluorescent sensors based on graphdiyne have also been reported. In general, the potential of graphdiyne in sensing still needs to be explored. Current research results do not show that graphdiyne has irreplaceable advantages in sensing. The bibliometric analysis used in this review also provides cooperative network analysis and co-citation analysis on this topic. This provides a reference for the audience wishing to undertake research on the topic. In addition, according to the analysis, we also listed the direction that which this field deserves attention in the future.

Fast water transport and molecular sieving through ultrathin ordered conjugated-polymer-framework membranes

The development of membranes that block solutes while allowing rapid water transport is of great importance. The microstructure of the membrane needs to be rationally designed at the molecular level to achieve precise molecular sieving and high water flux simultaneously. We report the design and fabrication of ultrathin, ordered conjugated-polymer-framework (CPF) films with thicknesses down to 1 nm via chemical vapour deposition and their performance as separation membranes. Our CPF membranes inherently have regular rhombic sub-nanometre (10.3 × 3.7 Å) channels, unlike membranes made of carbon nanotubes or graphene, whose separation performance depends on the alignment or stacking of materials. The optimized membrane exhibited a high water/NaCl selectivity of ∼6,900 and water permeance of ∼112 mol m^-2 h^-1 bar^-1, and salt rejection >99.5% in high-salinity mixed-ion separations driven by osmotic pressure. Molecular dynamics simulations revealed that water molecules quickly and collectively pass through the membrane by forming a continuous three-dimensional network within the hydrophobic channels. The advent of ordered CPF provides a route towards developing carbon-based membranes for precise molecular separation.

Multilayer Graphtriyne Membranes for Separation and Storage of CO2: Molecular Dynamics Simulations of Post-Combustion Model Mixtures

The ability to remove carbon dioxide from gaseous mixtures is a necessary step toward the reduction of greenhouse gas emissions. As a contribution to this field of research, we performed a molecular dynamics study assessing the separation and adsorption properties of multi-layered graphtriyne membranes on gaseous mixtures of CO₂, N₂, and H₂O. These mixtures closely resemble post-combustion gaseous products and are, therefore, suitable prototypes with which to model possible technological applications in the field of CO₂ removal methodologies. The molecular dynamics simulations rely on a fairly accurate description of involved force fields, providing reliable predictions of selectivity and adsorption coefficients. The characterization of the interplay between molecules and membrane structure also permitted us to elucidate the adsorption and crossing processes at an atomistic level of detail. The work is intended as a continuation and a strong enhancement of the modeling research and characterization of such materials as molecular sieves for CO₂ storage and removal.

Molecular hydrogen isotope separation by a graphdiyne membrane: a quantum-mechanical study

Graphdiyne (GDY) has emerged as a very promising two-dimensional (2D) membrane for gas separation technologies. One of the most challenging goals is the separation of deuterium (D₂) and tritium (T₂) from a mixture with the most abundant hydrogen isotope, H₂, an achievement that would be of great value for a number of industrial and scientific applications. In this work we study the separation of hydrogen isotopes in their transport through a GDY membrane due to mass-dependent quantum effects that are enhanced by the confinement provided by its intrinsic sub-nanometric pores. A reliable improved Lennard-Jones force field, optimized on accurate ab initio calculations, has been built to describe the molecule-membrane interaction, where the molecule is treated as a pseudoatom. The quantum dynamics of the molecules impacting on the membrane along a complete set of incidence directions have been rigorously addressed by means of wave packet calculations in the 3D space, which have allowed us to obtain transmission probabilities and, in turn, permeances, as the thermal average of the molecular flux per unit pressure. The effect of the different incidence directions on the probabilities is analyzed in detail and it is concluded that restricting the simulations to a perpendicular incidence leads to reasonable results. Moreover, it is found that a simple 1D model-using a zero-point energy-corrected interaction potential-provides an excellent agreement with the 3D probailities for perpendicular incidence conditions. Finally, D₂/H₂ and T₂/H₂ selectivities are found to reach maximum values of about 6 and 21 at ≈50 and 45 K, respectively, a feature due to a balance between zero-point energy and tunneling effects in the transport dynamics. Permeances at these temperatures are below recommended values for practical applications, however, at slightly higher temperatures (77 K) they become acceptable while the selectivities preserve promising values, particularly for the separation of tritium.

Ab Initio Study of Graphene/hBN Van der Waals Heterostructures: Effect of Electric Field, Twist Angles and p-n Doping on the Electronic Properties

In this work, we study the structural and electronic properties of boron nitride bilayers sandwiched between graphene sheets. Different stacking, twist angles, doping, as well as an applied external gate voltage, are reported to induce important changes in the electronic band structure near the Fermi level. Small electronic lateral gaps of the order of few meV can appear near the Dirac points K. We further discuss how the bandstructures change applying a perpendicular external electric field, showing how its application lifts the degeneracy of the Dirac cones and, in the twisted case, moves their crossing points away from the Fermi energy. Then, we consider the possibility of co-doping, in an asymmetric way, the two external graphene layers. This is a situation that could be realized in heterostructures deposited on a substrate. We show that the co-doping acts as an effective external electric field, breaking the Dirac cones degeneracy. Finally, our work demonstrates how, by playing with field strength and p-n co-doping, it is possible to tune the small lateral gaps, pointing towards a possible application of C/BN sandwich structures as nano-optical terahertz devices.

Modeling the Adsorption of Polycyclic Aromatic Hydrocarbons on Graphynes: An Improved Lennard-Jones Formulation

Research on the development of theoretical methodologies for modeling noncovalent interactions governing the adsorption of polycyclic aromatic hydrocarbons (PAHs) on graphene and other two-dimensional materials is being intensely pursued in recent times. Highly accurate empirical potentials have emerged as a viable alternative to first-principles calculations for performing large-scale simulations. Herein, we report exploration of the potential energy surfaces for the adsorption of cata-condensed and peri-condensed PAHs on graphynes (GYs) using the improved Lennard-Jones (ILJ) potential. Initially, the ILJ potential is parametrized against benchmark electronic structure calculations performed on a selected set of PAH-GY complexes using dispersion-corrected density functional theory. The accuracy of the parametrization scheme is then assessed by a comparison of the adsorption features predicted from the ILJ potential with those computed using electronic structure calculations. The potential energy profiles as well as the single point energy calculations and geometry reoptimizations performed on the minimum-energy configurations predicted by the ILJ potential for a broader range of PAH-GY complexes provided a validation of the parametrization scheme. Finally, by an extrapolation of the PAH adsorption energies on various GYs, we estimated the interlayer cohesion energies for the van der Waals bilayer heterostructures of GYs with graphene to be in the range of 25-50 meV/atom.

In pursuit of accurate interlayer potentials for twisted bilayer graphynes

Recent explorations of twist in bilayer graphene and the discovery of superconducting phases at certain magic angles have laid the groundwork for a new branch in materials science called twistronics. However, theoretical studies on twisted layered materials are impeded due to the computational expense associated with first-principles calculations. Empirical force field approaches that include anisotropic terms to describe interlayer interactions have come to the fore as excellent alternatives to deal with such a stumbling block. Taking a cue from these formulations, herein, we describe our pursuit of capturing the interlayer interactions in bilayer graphynes with atomistic empirical potentials. The choice of the potentials, namely the improved Lennard-Jones potential and Hod's interlayer potential, is motivated by the objective of bringing out the role of anisotropy explicitly. Empirical parameters for both the potentials are calibrated against dispersion-corrected DFT calculations that are performed to incorporate the stacking, sliding and twisting features of the bilayer configurations. Although the isotropic improved Lennard-Jones potential is able to describe the interlayer stacking of graphynes, it is inadequate to account for the interlayer twist properties. The anisotropic Hod's interlayer potential portrays the interlayer twisting energy profiles of the benchmark DFT calculations with a reasonable accuracy. Our potential formulations can bestow impetus to the research on the homo- and hetero-bilayer structures of graphynes and other two-dimensional materials.

Isotopic separation of helium through graphyne membranes: a ring polymer molecular dynamics study

Microscopic-level understanding of the separation mechanism for two-dimensional (2D) membranes is an active area of research due to potential implications of this class of membranes for various technological processes. Helium (He) purification from the natural resources is of particular interest due to the shortfall in its production. In this work, we applied the ring polymer molecular dynamics (RPMD) method to graphdiyne (Gr2) and graphtriyne (Gr3) 2D membranes having variable pore sizes for the separation of He isotopes, and compare for the first time with rigorous quantum calculations. We found that the transmission rate through Gr3 is many orders of magnitude greater than Gr2. The selectivity of either isotope at low temperatures is a consequence of a delicate balance between the zero-point energy effect and tunneling of ⁴He and ³He. In particular, a remarkable tunneling effect is reported on the Gr2 membrane at 10 K, leading to a much larger permeation of the lighter species as compared to the heavier isotope. RPMD provides an efficient approach for studying the separation of He isotopes, taking into account quantum effects of light nuclei motions at low temperatures, which classical methods fail to capture.

Recent progress in the development of thermal interface materials: a review

Modern electronic devices are characterized by high-power and high-frequency with excessive heat accumulation. Thermal interface materials (TIMs) are of crucial importance for efficient heat dissipation to maintain proper functions and lifetime for these devices. The most promising TIMs are those polymer-based nanocomposites consisting of polymers and low-dimensional materials with high thermal conductivity (TC). This perspective summarizes the recent progress on the thermal transport properties of newly discovered one-dimensional (1D) nanomaterials and two-dimensional (2D) nanomaterials as well as three-dimensional (3D) nanostructures consisting of these 1D and 2D nanomaterials. Moreover, the applications of various nanomaterials in polymer nanocomposites for advanced TIMs are critically reviewed and the mechanism of TC enhancement is analysed. It is hoped that the present review could provide better understanding of the thermal transport properties of recently developed 2D nanomaterials and various 3D nanostructures as well as relevant polymer-based TIMs, shedding more light on the thermal management research.

Hydrogenated Ψ-graphene as an ultraviolet optomechanical sensor

PSI (ψ)-graphene is a dynamically and thermally stable two-dimensional (2D) allotrope of carbon composed of 5-6-7 carbon rings. Herein, we study the opto/mechanical behavior of two graphene allotropes, Ψ-graphene and its hydrogenated form, Ψ-graphane under uniaxial and biaxial strain using density functional theory (DFT) calculations. We calculated the elastic constants and second Piola-Kirchhoff (PK2) stresses, in which both nanostructures indicate a similar elasticity behavior to graphene. Also, the plasmonic behavior of these structures in response to various strains has been studied. As a result, plasmonic peaks varied up to about 2 eV under strain. Our findings reveal that these two structures have a large peak in the ultraviolet (UV) region and can be tuned by different applied strain. In addition, Ψ-graphene has smaller peaks in the IR and UV regions. Therefore, both Ψ-graphene and Ψ-graphane can be used as UV optomechanical sensors, whereas Ψ-graphene could be used as an infrared (IR) and visible sensor.

PSI (ψ)-graphene is a dynamically and thermally stable two-dimensional (2D) allotrope of carbon composed of 5-6-7 carbon rings.

Interaction and Reactivity of Cisplatin Physisorbed on Graphene Oxide Nano-Prototypes

The physical adsorption of cisplatin (CP) on graphene oxide (GO) and reduced graphene oxide (rGO) is investigated at the DFT level of theory by exploiting suitable molecular prototypes representing the most probable adsorbing regions of GO and rGO nano-structures. The results show that the CP binding energy is enhanced with respect to that for the interaction with pristine graphene. This is due to the preferential adsorption of the drug in correspondence of the epoxy and hydroxy groups located on GO basal plane: an energy decomposition analysis of the corresponding binding energy reveals that the most attractive contribution comes from the electrostatic attraction between the -NH3 ends of CP and the oxygen groups on (r)GO, which can be associated with hydrogen bonding effects. Moreover, it is found that the reactivity of the physically adsorbed CP is practically unaltered being the free energy variation of the first hydrolysis reaction almost matching that of its free (unadsorbed drug) counterpart. The reported results suggest that the CP physical adsorption on GO and rGO carriers is overall feasible being an exergonic process in aqueous solution. The CP adsorption could facilitate its solubility and transport in water solutions, exploiting the high hydrophilicity of the peripheral carboxylic groups located on the edge of the GO and rGO nano-structures. Moreover, the the higher affinity of CP with respect to the oxidized sites suggests a possible dependence of drug loading and release on pH conditions, which would highly facilitate its specific delivery.

Multiscale Design of Graphyne-Based Materials for High-Performance Separation Membranes

By varying the number of acetylenic linkages connecting aromatic rings, a new family of atomically thin graph-n-yne materials can be designed and synthesized. Generating immense scientific interest due to its structural diversity and excellent physical properties, graph-n-yne has opened new avenues toward numerous promising engineering applications, especially for separation membranes with precise pore sizes. Having these tunable pore sizes in combination with their excellent mechanical strength to withstand high pressures, free-standing graph-n-yne is theoretically posited to be an outstanding membrane material for separating or purifying mixtures of either gases or liquids, rivaling or even dramatically exceeding the capabilities of current, state-of-art separation membranes. Computational modeling and simulations play an integral role in the bottom-up design and characterization of these graph-n-yne materials. Thus, here, the state of the art in modeling α-, β-, γ-, δ-, and 6,6,12-graphyne nanosheets for synthesizing graph-2-yne materials and 3D architectures thereof is discussed. Different synthesis methods are described and a broad overview of computational characterizations of graph-n-yne's electrical, chemical, and thermal properties is provided. Furthermore, a series of in-depth computational studies that delve into the specifics of graph-n-yne's mechanical strength and porosity, which confer superior performance for separation and desalination membranes, are reviewed.

Graphynes for Water Desalination and Gas Separation

Selective transport of mass through membranes, so-called separation, is fundamental to many industrial applications, e.g., water desalination and gas separation. Graphynes, graphene analogs yet containing intrinsic uniformly distributed pores, are excellent candidates for highly permeable and selective membranes owing to their extreme thinness and high porosity. Graphynes exhibit computationally determined separation performance far beyond experimentally measured values of commercial state-of-the-art polyamide membranes; they also offer advantages over other atomically thin membranes like porous graphene in terms of controllability in pore geometry. Here, recent progress in proof-of-concept computational research into various graphynes for water desalination and gas separation is discussed, and their theoretically predicted outstanding permeability and selectivity are highlighted. Challenges associated with the future development of graphyne-based membranes are further analyzed, concentrating on controlled synthesis of graphyne, maintenance of high structural stability to withstand loading pressures, as well asthe demand for accurate computational characterization of separation performance. Finally, possible directions are discussed to align future efforts in order to push graphynes and other 2D material membranes toward practical separation applications.

Aqueous proton-selective conduction across two-dimensional graphyne

The development of direct methanol fuel cells is hindered by the issue of methanol crossover across membranes, despite the remarkable features resulting from the use of liquid fuel. Here we investigate the proton-selective conduction behavior across 2D graphyne in an aqueous environment. The aqueous proton conduction mechanism transitions from bare proton penetration to a mixed vehicular and Grotthuss transportation when the side length of triangular graphyne pores increases to 0.95 nm. A further increase in the side length to 1.2 nm results in the formation of a patterned aqueous/vacuum interphase, enabling protons to be conducted through the water wires via Grotthuss mechanism with low energy barriers. More importantly, it is found that 2D graphyne with the side length of less than 1.45 nm can effectively block methanol crossover, suggesting that 2D graphyne with an appropriate pore size is an ideal material to achieve zero-crossover proton-selective membranes.

Applications of Graphdiyne on Optoelectronic Devices

Graphdiyne (GD) is a novel two-dimensional carbon material composed of sp and sp²-hybridized carbon atoms. This kind of carbon allotrope has attracted more and more attention not only because of the distinctive porous structure but also because of its intriguing electronic properties such as high mobility and conductivity, good field emission properties, and tunable natural band gap. In this review, some representative applications of GD on a variety of optoelectronic devices are described. Starting from the methods of introducing GD into the devices, we analyze the interactions between GD and other device components, summarize the general mechanism of how GD improves performance of the devices, and provide a glimpse into the future of GD at the end.

Multiscale Simulation of the Interaction and Adsorption of Ions on a Hydrophobic Graphene Surface

The adsorption of ions on a graphene surface is very important to control relevant graphene-based processes. In this work, a multiscale simulation was carried out to study the adsorption of Na⁺ /Cl^- ions on graphene by combining quantum mechanics calculations and molecular dynamics (MD) simulations. The interaction energies of the ions with graphene were computed using density functional theory (DFT). It was found that the ions show strong interaction with a graphene cluster and the overwhelming portion of the interaction energy is the ion-π orbital interaction. The large orbital interaction can be ascribed to the two contributions arising from the ion-induced polarization of graphene and the charge transfer between ion and graphene. Their different contribution degrees reveal that the polarization effect plays a main role on the orbital interaction for ion adsorption. Comparatively, for Na/Cl atom adsorption, the charge transfer shows large part to the orbital interaction with weak atom-induced polarization. The obtained interaction energies were applied to develop new interaction potentials between ion and graphene, and then MD simulations were used to study the interfacial adsorption behavior of Na⁺ /Cl^- aqueous solution onto the graphene surface. Due to enhanced ion-π interactions, Na⁺ /Cl^- cooperatively demonstrates a strong ion adsorption layer through direct contact with the hydrophobic graphene surface. Our simulation result presents a new understanding of ion-graphene interactions.

Atomistic Dynamics Investigation of the Thermomechanical Properties and Li Diffusion Kinetics in ψ-Graphene for LIB Anode Material

A fundamental understanding of the thermomechanical properties of electrode materials and Li-ion diffusion kinetics is indispensable for designing high-performance Li-ion batteries (LIBs) with high structural stability and safety. Herein, we performed both molecular dynamics (MD) simulations and density functional theory (DFT) calculations to investigate the thermomechanical properties and Li diffusion kinetics in a two-dimensional (2D) defect-filled graphene-like membrane consisting of 5-, 6-, and 7-membered rings, called psi (ψ)-graphene. Our results reveal that ψ-graphene has a negative linear thermal expansion coefficient, a high specific heat capacity, and high elastic constants that satisfy the Born's criterion for mechanical stability, which can be elucidated as the evidence of strong anharmonicity in ψ-graphene because of the soft out-of-plane bending modes. These characteristics can help prevent the thermal runaway that can occur during overheating and prevent structural damage because of the severe volume expansion of the LIBs. In addition, the Li diffusion coefficient was estimated to be 10^-9 cm²/s at 300 K with a low Li migration activation energy (<0.16 eV), which suggests favorable electrode kinetics with fast Li conduction. Our DFT calculations also show that ψ-graphene can possess a fairly good theoretical capacity (339 mA h g^-1) and a lower Li diffusion barrier (<0.21 eV). Our results suggest that the new fundamental insights presented here will help to stimulate further experimental work on ψ-graphene for promising future applications as a superior electrode material for LIBs.

Graphynes: indispensable nanoporous architectures in carbon flatland

Theoretical design and experimental realization of novel nanoporous architectures in carbon membranes has been a success story in recent times. Research on graphynes, an interesting class of materials in carbon flatland, has contributed immensely to this success story. Graphyne frameworks possessing sp and sp2 hybridized carbon atoms offer a variety of uniformly distributed nanoporous architectures for applications ranging from water desalination, gas separation, and energy storage to catalysis. Theory has played a pivotal role in research on graphynes, starting from the prediction of various structural forms to the emergence of their remarkable applications. Herein, we attempt to provide an up-to-date account of research on graphynes, highlighting contributions from numerous theoretical investigations that have led to the current status of graphynes as indispensable materials in carbon flatland. Despite unsolved challenges in large-scale synthesis, the future appears bright for graphynes in present theoretical and experimental research scenarios.

Fabrication of sub-nanometer pores on graphene membrane for ion selective transport

The ability to sieve ions through nanopores with high throughput has significant importance in seawater desalination and other separation applications. In this study, a plasma etching process has been demonstrated to be an efficient way to produce high-density nanopores on graphene membranes with tunable size in the sub-nanometer range. Besides the pore size, the nanopore density is also controllable through adjusting the exposure time of the sample to argon or oxygen plasma. The plasma-treated graphene membranes can selectively transport protons, Na⁺ and Cl^- ions. Density function theory calculations uncover that the sp³ and vacancy-type defects construct different energy barriers for different ions, which allow the defected graphene membrane to selectively transport ions. Our study indicates that oxygen plasma etching can be used as a very convenient and efficient method for fabricating a monolayer filtration graphene membrane with tunable sub-nanometer pores.

Noncovalent interactions between cisplatin and graphene prototypes

Cisplatin (CP) has been widely used as an anticancer drug for more than 30 years despite severe side effects due to its low bioavailability and poor specificity. For this reason, it is paramount to study and design novel nanomaterials to be used as vectors capable to effectively deliver the drug to the biological target. The CP square-planar geometry, together with its low water solubility, suggests that it could be possibly easily adsorbed on 2D graphene nanostructures through the interaction with the related highly conjugated π-electron system. In this work, pyrene has been first selected as the minimum approximation to the graphene plane, which allows to properly study the noncovalent interactions determining the CP adsorption. In particular, electronic structure calculations at the MP2C and DFT-SAPT levels of theory have allowed to obtain benchmark interaction energies for some limiting configurations of the CP-pyrene complex, as well as to assess the role of the different contributions to the total interaction: it has been found that the parallel configurations of the aggregate are mainly stabilized around the minimum region by dispersion, in a similar way as for complexes bonded through π-π interactions. Then, the benchmark interaction energies have been used to test corresponding estimations obtained within the less expensive DFT to validate an optimal exchange-correlation functional which includes corrections to take properly into account for the dispersion contribution. Reliable DFT interaction energies have been therefore obtained for CP adsorbed on graphene prototypes of increasing size, ranging from coronene, ovalene, and up to C₁₅₀ H₃₀ . Finally, DFT geometry optimizations and frequency calculations have also allowed a reliable estimation of the adsorption enthalpy of CP on graphene, which is found particularly favorable (about -20 kcal/mol at 298 K and 1 bar) being twice that estimated for the corresponding benzene adsorption. © 2017 Wiley Periodicals, Inc.

On the importance of non-covalent interactions for porous membranes: unraveling the role of pore size

Unfolding the diffusion barrier into its physical energy components is of paramount importance to understand and quantify the balance between the pore size and chemical affinity of a porous structure.

3D graphene-based nanostructured materials as sorbents for cleaning oil spills and for the removal of dyes and miscellaneous pollutants present in water

Oil spills over seawater and dye pollutants in water cause economic and environmental damage every year. Among various methods to deal oil spill problems, the use of porous materials has been proven as an effective strategy. In recent years, graphene-based porous sorbents have been synthesized to address the shortcomings associated with conventional sorbents such as their low uptake capacity, slow sorption rate, and non-recyclability. This article reviews the research undertaken to control oil spillage using three-dimensional (3D) graphene-based materials. The use of these materials for removal of dyes and miscellaneous environmental pollutants from water is explored and the application of various multifunctional 3D oil sorbents synthesized by surface modification technique is presented. The future prospects and limitations of these materials as sorbents are also discussed.

Fundamental transport mechanisms, fabrication and potential applications of nanoporous atomically thin membranes

Graphene and other two-dimensional materials offer a new approach to controlling mass transport at the nanoscale. These materials can sustain nanoscale pores in their rigid lattices and due to their minimum possible material thickness, high mechanical strength and chemical robustness, they could be used to address persistent challenges in membrane separations. Here we discuss theoretical and experimental developments in the emerging field of nanoporous atomically thin membranes, focusing on the fundamental mechanisms of gas- and liquid-phase transport, membrane fabrication techniques and advances towards practical application. We highlight potential functional characteristics of the membranes and discuss applications where they are expected to offer advantages. Finally, we outline the major scientific questions and technological challenges that need to be addressed to bridge the gap from theoretical simulations and proof-of-concept experiments to real-world applications.

Water flow in carbon-based nanoporous membranes impacted by interactions between hydrated ions and aromatic rings

Carbon-based nanoporous membranes, such as carbon nanotubes (CNTs), graphene/graphene oxide and graphyne, have shown great potential in water desalination and purification, gas and ion separation, biosensors, and lithium-based batteries, etc. A deep understanding of the interaction between hydrated ions in an aqueous solution and the graphitic surface in systems composed of water, ions and a graphitic surface is essential for applications with carbon-based nanoporous membrane platforms. In this review, we describe the recent progress of the interaction between hydrated ions and aromatic ring structures on the carbon-based surface and its applications in the water flow in a carbon nanotube. We expect that these works can be extended to the understanding of water flow in other nanoporous membranes, such as nanoporous graphene, graphyne and stacked sheets of graphene oxide.

Multiscale molecular simulations on interfacial adsorption and permeation of nanoporous graphynes

Unique interfacial adsorption and permeation on nanoporous graphynes have been revealed by a multiscale simulation strategy.

Adsorption of molecular hydrogen on coronene with a new potential energy surface

Adsorption of molecular hydrogen on coronene studied with a new potential energy surface. Path integral Monte Carlo and basin-hopping calculations have been performed to investigate energies and structures of the corresponding (H₂)_N-coronene clusters.

A Novel Nanoporous Graphite Based on Graphynes: First-Principles Structure and Carbon Dioxide Preferential Physisorption

Ubiquitous graphene is a stricly 2D material representing an ideal adsorbing platform due to its large specific surface area as well as its mechanical strength and resistance to both thermal and chemical stresses. However, graphene as a bulk material has the tendency to form irreversible agglomerates leading to 3D graphitic structures with a significant decrease of the area available for adsorption and no room for gas intercalation. In this paper, a novel nanoporous graphite formed by graphtriyne sheets is introduced; its 3D structure is theoretically assessed by means of electronic structure and molecular dynamics computations within the DFT level of theory. It is found that the novel layered carbon allotrope is almost as compact as pristine graphite but the inherent porosity of the 2D graphyne sheets and its relative stacking leads to nanochannels that cross the material and whose subnanometer size could allow the diffusion and storage of gas species. A molecular prototype of the nanochannel is used to accurately determine first-principles adsorption energies and enthalpies for CO₂, N₂, H₂O, and H₂ within the pores. The proposed porous graphite presents no significant barrier for gas diffusion and shows a high propensity for CO₂ physisorption with respect to the other relevant components in both pre- and postcombustion gas streams.

Tunable thermal transport and mechanical properties of graphyne heterojunctions

Tunable thermal transport and mechanical properties of graphyne heterojunctions.

Low-energy structures of benzene clusters with a novel accurate potential surface

The benzene-benzene (Bz-Bz) interaction is present in several chemical systems and it is known to be crucial in understanding the specificity of important biological phenomena. In this work, we propose a novel Bz-Bz analytical potential energy surface which is fine-tuned on accurate ab initio calculations in order to improve its reliability. Once the Bz-Bz interaction is modeled, an analytical function for the energy of the Bzn clusters may be obtained by summing up over all pair potentials. We apply an evolutionary algorithm (EA) to discover the lowest-energy structures of Bzn clusters (for n=2-25), and the results are compared with previous global optimization studies where different potential functions were employed. Besides the global minimum, the EA also gives the structures of other low-lying isomers ranked by the corresponding energy. Additional ab initio calculations are carried out for the low-lying isomers of Bz3 and Bz4 clusters, and the global minimum is confirmed as the most stable structure for both sizes. Finally, a detailed analysis of the low-energy isomers of the n = 13 and 19 magic-number clusters is performed. The two lowest-energy Bz13 isomers show S6 and C3 symmetry, respectively, which is compatible with the experimental results available in the literature. The Bz19 structures reported here are all non-symmetric, showing two central Bz molecules surrounded by 12 nearest-neighbor monomers in the case of the five lowest-energy structures.

“Carbo-aromaticity” and novel carbo-aromatic compounds

Recent advances in experimental and theoretical studies ofcarbo-benzene derivatives, along with the proposition of a generalization of the definition of aromaticity to the two-membered π-rings of triple bonds, suggest relevance for the notion of “carbo-aromaticity”.