Time-Resolved Studies of the Acoustic Vibrational Modes of Metal and Semiconductor Nano-objects

Coherent acoustic vibrations of Au nanoblocks and their modulation by Al2O3 layer deposition

Coherent acoustic phonons induced in metallic nanostructures have attracted tremendous attention owing to their unique optomechanical characteristics. The frequency of the acoustic phonon vibration is highly sensitive to the material adsorption on metallic nanostructures and, therefore, the acoustic phonon offers a promising platform for ultrasensitive mass sensors. However, the physical origin of acoustic frequency modulation by material adsorption has been partially unexplored so far. In this study, we prepared Al2O3-deposited Au nanoblocks and measured their acoustic phonon frequencies using time-resolved pump-probe measurements. By precisely controlling the thickness of the Al2O3 layer, we systematically investigated the relation between the acoustic phonon frequency and the deposited Al2O3 amounts. The time-resolved measurements revealed that the acoustic breathing modes were predominantly excited in the Au nanoblocks, and their frequencies increased with the increment of the Al2O3 thickness. From the relationship between the acoustic phonon frequency and the Al2O3 thickness, we revealed that the acoustic phonon frequency modulation is attributed to the density change of the whole sample. Our results would provide fruitful information for developing quantitative mass sensing devices based on metallic nanostructures.

Excitation and detection of acoustic phonons in nanoscale systems

Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications.

Low-Frequency Oscillations in Optical Measurements of Metal-Nanoparticle Vibrations

Time-resolved optical measurements of vibrating metal nanoparticles have been used extensively to probe the ultrafast mechanical properties of the nanoparticles and of the surrounding liquid, but nearly all investigations so far have been limited to the linear regime. Here, we report the observation of a low-frequency oscillating signal in transient-absorption measurements of nanoparticles with octahedral gold cores and cubic silver shells; the signal appears at the difference of two mechanical vibrational frequencies in the particles, suggesting a nonlinear mixing process. We tentatively attribute this proposed mixing to a nonlinear coupling between a vibrational mode of the nanoparticle and its optical-frequency plasmon resonance. The optimization of this nonlinear transduction may enable high-efficiency opto-mechanical frequency mixing in the GHz-THz frequency regime.

Polymer dependent acoustic mode coupling and Hooke's law spring constants in stacked gold nanoplates

Metal nanoparticles are excellent acoustic resonators and their vibrational spectroscopy has been widely investigated. However, the coupling between vibrational modes of different nanoparticles is less explored. For example, how the intervening medium affects the coupling strength is not known. Here, we investigate how different polymers affect coupling in Au nanoplate-polymer-Au nanoplate sandwich structures. The coupling between the breathing modes of the Au nanoplates was measured using single-particle pump-probe spectroscopy, and the polymer dependent coupling strength was determined experimentally. Analysis of the acoustic mode coupling gives the effective spring constant for the polymers. A relative motion mode was also observed for the stacked Au nanoplates. The frequency of this mode is strongly correlated with the coupling constant for the breathing modes. The breathing mode coupling and relative motion mode were analyzed using a coupled oscillator model. This model shows that both these effects can be described using the same spring constant for the polymer. Finally, we present a new type of mass balance using the strongly coupled resonators. We show that the resonators have a mass detection limit of a few femtograms. We envision that further understanding of the vibrational coupling in acoustic resonators will improve the coupling strength and expand their potential applications.

Spatiotemporal Temperature and Pressure in Thermoplasmonic Gold Nanosphere-Water Systems

We offer a detailed investigation of the photophysical properties of plasmonic solid and hollow gold nanospheres suspended in water by combining ultrafast transient absorption (TA) spectroscopy with molecular dynamics (MD) simulations. TA reveals that hollow gold nanospheres (HGNs) exhibit faster excited state relaxation and larger amplitude acoustic phonon modes than solid gold nanoparticles of the same outer diameter. MD simulation carried out on full scale nanoparticle-water models (over 10 million atoms) to simulate the temporal evolution (0-100 ps) of the thermally excited particles (1000 or 1250 K) provides atomic-scale resolution of the spatiotemporal temperature and pressure maps, as well as visualization of the lattice vibrational modes. For the 1000 K HGN, temperatures upward of 500 K in the vicinity of the shell surface were observed, along with pressures up to several hundred MPa in the inner cavity, revealing potential use as a photoinduced nanoreactor. Our approach of combining TA and MD provides a path to better understanding how thermal-structural properties (such as expansion and contraction) and thermal-optical properties (such as modulated dielectrics) manifest themselves as TA signatures. The detailed picture of heat transfer at interfaces should help guide nanoparticle design for a wide range of applications that rely on photothermal conversion, including photothermal coupling agents for nanoparticle-mediated photothermal therapy and photocatalysts for light-driven chemical reactions.

Optical Properties and Excited-State Dynamics of Atomically Precise Gold Nanoclusters

Understanding the excited-state dynamics of nanomaterials is essential to their applications in photoenergy storage and conversion. This review summarizes recent progress in the excited-state dynamics of atomically precise gold (Au) nanoclusters (NCs). We first discuss the electronic structure and typical relaxation pathways of Au NCs from subpicoseconds to microseconds. Unlike plasmonic Au nanoparticles, in which collective electron excitation dominates, Au NCs show single-electron transitions and molecule-like exciton dynamics. The size-, shape-, structure-, and composition-dependent dynamics in Au NCs are further discussed in detail. For small-sized Au NCs, strong quantum confinement effects give rise to relaxation dynamics that is significantly dependent on atomic packing, shape, and heteroatom doping. For relatively larger-sized Au NCs, strong size dependence can be observed in exciton and electron dynamics. We also discuss the origin of coherent oscillations and their roles in excited-state relaxation. Finally, we provide our perspective on future directions in this area.

Nanoparticle-Fluid Interactions at Ultrahigh Acoustic Vibration Frequencies Studied by Femtosecond Time-Resolved Microscopy

Liquid viscous and viscoelastic properties are very important parameters in determining rheological phenomena. Mechanical resonators with extremely high vibrational frequencies interacting with simple liquids present a wide range of applications from mass sensing to biomechanics. However, a lack of understanding of fluid viscoelasticity greatly hinders the utilization of mechanical resonators. In this paper, the high frequency acoustic vibrations of Au nanoplates with large quality factors were used to probe fluid properties (water, glycerol, and their mixtures) through time-resolved pump-probe microscopy experiments. For water, viscous damping was clearly observed, where an inviscid effect was only detected previously. Adding glycerol to the water increases the fluid viscosity and leads to a bulk viscoelastic response in the system. The experimental results are in excellent agreement with a continuum mechanics model for the damping of nanoplate breathing modes in liquids, confirming the experimental observation of viscoelastic effects. In addition to the breathing modes of the nanoplates, Brillouin oscillations are observed in the experiments. Analysis of the frequency of the Brillouin oscillations also shows the presence of viscoelastic effects in the high-viscosity solvents. The detection and analysis of viscous damping in liquids is important not only for understanding the energy dissipation mechanisms and providing the mechanical relaxation times of the liquids but also for developing applications of nanomechanical resonators for fluid environments.

Transient absorption microscopy: Technological innovations and applications in materials science and life science

Transient absorption (TA) spectroscopy has been extensively used in the study of excited state dynamics of various materials and molecules. The transition from TA spectroscopy to TA microscopy, which enables the space-resolved measurement of TA, is opening new investigations toward a more complete picture of excited state dynamics in functional materials, as well as the mapping of crucial biopigments for precision diagnosis. Here, we review the recent instrumental advancement that is pushing the limit of spatial resolution, detection sensitivity, and imaging speed. We further highlight the emerging application in materials science and life science.

Mass loading effects in the acoustic vibrations of gold nanoplates

The breathing modes of single suspended gold nanoplates have been examined by transient absorption microscopy. These vibrational modes show very high quality factors which means that their frequencies can be accurately measured. Measurements performed before and after removing the organic layer that coats the as synthesized nanoplates show significant increases in frequency, which are consistent with removal of a few nm of organic material from the nanoplate surface. Experiments were also performed after depositing polymer beads on the sample. These measurements show a decrease in frequency in the region of the beads. This implies that adding a localized mass to the nanoplate hybridizes the vibrational normal modes, creating a new breathing mode which has a maximum amplitude at the bead. The nanoplate resonators have a mass sensing detection limit of ca. 10 attograms, which is comparable to the best results that have been achieved with plasmonic nanoparticles.

Making waves: Radiation damping in metallic nanostructures

Metal nanostructures display several types of resonances. In the visible and near-IR spectral regions, there are localized surface plasmon resonances (LSPRs) that involve the coherent oscillation of the conduction electrons. Extended metal nanostructures, such as nanowires or nanoplates, also exhibit propagating surface plasmon polaritons (PSPPs), which are motions of the electrons at the surface of the structure that have a well-defined momentum. In addition, the vibrational normal modes of metal nanostructures give rise to low frequency resonances in the gigahertz to terahertz range. These different types of motions/resonances suffer energy losses from internal effects and from interactions with the environment. The goal of this perspective is to describe the part of the energy relaxation process due to the environment. Even though the plasmon resonances and acoustic vibrational modes arise from very different physics, it turns out that environmental damping is dominated by radiation of waves. The way the rates for radiation damping depend on the size of the nanostructure and the properties of the environment will be discussed for the different processes. For example, it is well known that for LSPRs, the rate of radiation damping increases with particle size. However, the radiation damping rate decreases with increasing dimensions for PSPPs and for the acoustic vibrational modes.

Harnessing Plasmon-Induced Hot Carriers at the Interfaces With Ferroelectrics

This article reviews the scientific understanding and progress of interfacing plasmonic particles with ferroelectrics in order to facilitate the absorption of low-energy photons and their conversion to chemical fuels. The fundamental principles of hot carrier generation and charge injection are described for semiconductors interfaced with metallic nanoparticles and immersed in aqueous solutions, forming a synergistic juncture between the growing fields of plasmonically-driven photochemistry and semiconductor photocatalysis. The underlying mechanistic advantages of a metal-ferroelectric vs. metal-nonferroelectric interface are presented with respect to achieving a more optimal and efficient control over the Schottky barrier height and charge separation. Notable recent examples of using ferroelectric-interfaced plasmonic particles have demonstrated their roles in yielding significantly enhanced photocurrents as well as in the photon-driven production of molecular hydrogen. Notably, plasmonically-driven photocatalysis has been shown to occur for photon wavelengths in the infrared range, which is at lower energies than typically possible for conventional semiconductor photocatalysts. Recent results thus demonstrate that integrated ferroelectric-plasmonic systems represent a potentially transformative concept for use in the field of solar energy conversion.

Ultrafast measurements of the dynamics of single nanostructures: a review

The ability to study single particles has revolutionized nanoscience. The advantage of single particle spectroscopy measurements compared to conventional ensemble studies is that they remove averaging effects from the different sizes and shapes that are present in the samples. In time-resolved experiments this is important for unraveling homogeneous and inhomogeneous broadening effects in lifetime measurements. In this report, recent progress in the development of ultrafast time-resolved spectroscopic techniques for interrogating single nanostructures will be discussed. The techniques include far-field experiments that utilize high numerical aperture (NA) microscope objectives, near-field scanning optical microscopy (NSOM) measurements, ultrafast electron microscopy (UEM), and time-resolved x-ray diffraction experiments. Examples will be given of the application of these techniques to studying energy relaxation processes in nanoparticles, and the motion of plasmons, excitons and/or charge carriers in different types of nanostructures.

Photometrics of ultrafast and fast broadband electronic transient absorption spectroscopy: State of the art

The physical limits of the photometric resolution in broadband electronic transient absorption spectroscopy are discussed together with solutions for how to reach these limits in practice. In the first part, quantitative expressions for the noise contributions to the transient absorption signal are derived and experimentally tested. Experimental approaches described in the literature are discussed and compared on this basis. Guide-lines for designing a setup are established. In the second part, a method for obtaining nearly shot-noise limited kinetics with photometric resolution of the order of 100 μOD in overall measurement times of a few minutes from femtosecond to microsecond time scale is presented. The results are discussed in view of other experiments of step-scan type which are subject to a background or to correlated noise. Finally, detailed information is provided on how to obtain transient absorption spectra where counting statistics are the sole source of noise. A method for how to suppress outliers without introducing bias is discussed. An application example is given to demonstrate the achievable signal-to-noise level and the fast acquisition time.

Controlling the Quality Factor of a Single Acoustic Nanoresonator by Tuning its Morphology

The mechanical vibrations of individual gold nanodisks nanopatterned on a sapphire substrate are investigated using ultrafast time-resolved optical spectroscopy. The number and characteristics of the detected acoustic modes are found to vary with nanodisk geometry. In particular, their quality factors strongly depend on nanodisk aspect ratio (i.e., diameter over height ratio), reaching a maximal value of ≈70, higher than those previously measured for substrate-supported nano-objects. The peculiarities of the detected acoustic vibrations are confirmed by finite-element simulations, and interpreted as the result of substrate-induced hybridization between the vibrational modes of a nanodisk. The present findings demonstrate novel possibilities for engineering the vibrational modes of nano-objects.

Polycrystallinity of Lithographically Fabricated Plasmonic Nanostructures Dominates Their Acoustic Vibrational Damping

The study of acoustic vibrations in nanoparticles provides unique and unparalleled insight into their mechanical properties. Electron-beam lithography of nanostructures allows precise manipulation of their acoustic vibration frequencies through control of nanoscale morphology. However, the dissipation of acoustic vibrations in this important class of nanostructures has not yet been examined. Here we report, using single-particle ultrafast transient extinction spectroscopy, the intrinsic damping dynamics in lithographically fabricated plasmonic nanostructures. We find that in stark contrast to chemically synthesized, monocrystalline nanoparticles, acoustic energy dissipation in lithographically fabricated nanostructures is solely dominated by intrinsic damping. A quality factor of Q = 11.3 ± 2.5 is observed for all 147 nanostructures, regardless of size, geometry, frequency, surface adhesion, and mode. This result indicates that the complex Young's modulus of this material is independent of frequency with its imaginary component being approximately 11 times smaller than its real part. Substrate-mediated acoustic vibration damping is strongly suppressed, despite strong binding between the glass substrate and Au nanostructures. We anticipate that these results, characterizing the optomechanical properties of lithographically fabricated metal nanostructures, will help inform their design for applications such as photoacoustic imaging agents, high-frequency resonators, and ultrafast optical switches.

On the measurement of relaxation times of acoustic vibrations in metal nanowires

Energy relaxation of the breathing modes of metal nanostructures is controlled by radiation of sound waves in the environment.

Acousto-Plasmonic Sensing Assisted by Nonlinear Optical Interactions in Bimetallic Au-Pt Nanoparticles

A strong influence of mechanical action in nonlinear optical transmittance experiments with bimetallic nanoparticles integrated by gold and platinum was observed. The nanostructured samples were synthesized by a sol-gel method and contained in an ethanol suspension. UV-VIS spectroscopy evaluations, Transmission electron microscopy studies and input-output laser experiments were characterized. A two-photon absorption effect was induced by nanosecond pulses at 532 nm wavelength with an important contribution from the plasmonic response of the nanomaterials. All-optical identification of acoustical waves was remarkably improved by optical nonlinearities. High sensitivity for instrumentation of mechano-optical signals sensing particular fluids was demonstrated by using a variable carbon dioxide incorporation to the system.

Harnessing Hot Electrons from Near IR Light for Hydrogen Production Using Pt-End-Capped-AuNRs

Gold nanorods show great potential in harvesting natural sunlight and generating hot charge carriers that can be employed to produce electrical or chemical energies. We show that photochemical reduction of Pt(IV) to Pt metal mainly takes place at the ends of gold nanorods (AuNRs), suggesting photon-induced hot electrons are localized in a time-averaged manner at AuNR ends. To use these hot electrons efficiently, a novel synthetic method to selectively overgrow Pt at the ends of AuNRs has been developed. These Pt-end-capped AuNRs show relatively high activity for the production of hydrogen gas using artificial white light, natural sunlight, and more importantly, near IR light at 976 nm. Tuning of the surface plasmon resonance (SPR) wavelength of AuNRs changes the hydrogen gas production rate, indicating that SPR is involved in hot electron generation and photoreduction of hydrogen ions. This study shows that gold nanorods are excellent for converting low-energy photons into high-energy hot electrons, which can be used to drive chemical reactions at their surfaces.

Pump-Power Dependence of Coherent Acoustic Phonon Frequencies in Colloidal CdSe/CdS Core/Shell Nanoplatelets

Femtosecond optical pump-probe spectroscopy resolves hitherto unobserved coherent acoustic phonons in colloidal CdSe/CdS core/shell nanoplatelets (NPLs). With increasing pump fluence, the frequency of the in-plane acoustic mode increases from 5.2 to 10.7 cm^-1, whereas the frequency of the out-of-plane mode remains at ∼20 cm^-1. Analysis of the oscillation phases suggests that the coherent acoustic phonon generation mechanism transitions from displacive excitation to subpicosecond Auger hole trapping with increasing pump fluence. The measurements yield Huang-Rhys parameters of ∼10^-2 for both acoustic modes. The weak electron-phonon coupling strengths favor the application of NPLs in optoelectronics.

Imaging Intra- and Interparticle Acousto-plasmonic Vibrational Dynamics with Ultrafast Electron Microscopy

We report real-space, time-resolved imaging of coherently excited acoustic phonon modes in plasmonic nanoparticles via femtosecond electron imaging with an ultrafast electron microscope. The particles studied were cetyl trimethylammonium bromide stabilized Au nanorods (40 × 120 nm), and the particular specimen configurations for which photoinduced vibrational modes were visualized consisted of a single, isolated nanocrystal and a cluster of four irregularly arranged and randomly oriented particles, all supported on an amorphous Si₃N₄ membrane. In both configurations, we are able to resolve discrete intraparticle acoustic phonon modes via diffraction-contrast modulation with bright-field femtosecond electron imaging. For the single nanorod, we spatiotemporally mapped the intraparticle vibrational energy distribution and decay times. With Fourier filtering, acoustic phonons ranging from 4 to 30 GHz (250 to 33 ps periods, respectively) were visualized, corresponding to bending, extensional, and higher-order modes. Furthermore, heterogeneously distributed intraparticle decay times, ranging from 3 to 10 ns, were spatially mapped, indicating a strong dependence on coupling of the mode to the underlying substrate. For a cluster of four randomly oriented nanorods, we are able to image acoustic phonon modes that are strongly localized to particular particle-particle contact regions within the aggregate. A vibrational mode occurring at 27 GHz (37 ps period) was observed to occur at a 10 nm side-to-end contact region, with other intraparticle points at distances of 20 and 50 nm from the region showing no such dynamics, although the initial few-picosecond diffraction-contrast response was observed changing sign in moving from the end to the center of the particle. Excellent agreement is found between the spatiotemporally mapped vibrational-mode symmetries and finite-element simulations of supported modes in a polymer-coated Au nanorod supported on a Si₃N₄ membrane. This experiment resolves both the structure and dynamic properties of the plasmonic assembly, providing insight into the characteristics of complex plasmonic assemblies that ultimately determine their response to ultrafast excitation.

Probing the acoustic vibrations of complex-shaped metal nanoparticles with four-wave mixing

We probe the acoustic vibrations of silver nanoprisms and gold nano-octahedrons in aqueous solution with four-wave mixing. The nonlinear optical response shows two acoustic vibrational modes: an in-plane mode of nanoprisms with vertexial expansion and contraction; an extensional mode of nano-octahedrons with longitudinal expansion and transverse contraction. The particles were also analyzed with electron microscopy and the acoustic resonance frequencies were then calculated by the finite element analysis, showing good agreement with experimental observations. The experimental mode frequencies also fit with theoretical approximations, which show an inverse dependence of the mode frequency on the edge length, for both nanoprisms and nano-octahedrons. This technique is promising for in situ monitoring of colloidal growth.

Spatiotemporal Imaging of the Acoustic Field Emitted by a Single Copper Nanowire

The monochromatic and geometrically anisotropic acoustic field generated by 400 and 120 nm diameter copper nanowires simply dropped on a 10 μm silicon membrane is investigated in transmission using three-dimensional time-resolved femtosecond pump-probe experiments. Two pump-probe time-resolved experiments are carried out at the same time on both sides of the silicon substrate. In reflection, the first radial breathing mode of the nanowire is excited and detected. In transmission, the longitudinal and shear waves are observed. The longitudinal signal is followed by a monochromatic component associated with the relaxation of the nanowire's first radial breathing mode. Finite difference time domain (FDTD) simulations are performed and accurately reproduce the diffracted field. A shape anisotropy resulting from the large aspect ratio of the nanowire is detected in the acoustic field. The orientation of the underlying nanowires is thus acoustically deduced.

Ultrafast Surface-Enhanced Raman Probing of the Role of Hot Electrons in Plasmon-Driven Chemistry

Hot electrons generated through plasmonic excitations in metal nanostructures show great promise for efficiently driving chemical reactions with light. However, the lifetime, yield, and mechanism of action of plasmon-generated hot electrons involved in a given photocatalytic process are not well understood. Here, we develop ultrafast surface-enhanced Raman scattering (SERS) as a direct probe of plasmon-molecule interactions in the plasmon-catalyzed dimerization of 4-nitrobenzenethiol to p,p'-dimercaptoazobenzene. Ultrafast SERS probing of these molecular reporters in plasmonic hot spots reveals transient Fano resonances, which we attribute to near-field coupling of Stokes-shifted photons to hot electron-driven metal photoluminescence. Surprisingly, we find that hot spots that yield more photoluminescence are much more likely to drive the reaction, which indirectly proves that plasmon-generated hot electrons induce the photochemistry. These ultrafast SERS results provide insight into the relative reactivity of different plasmonic hot spot environments and quantify the ultrafast lifetime of hot electrons involved in plasmon-driven chemistry.

Breathing mode vibrations and elastic properties of single-crystal and penta-twinned gold nanorods

The acoustic vibrations of individual single-crystal and penta-twinned gold nanorods with widths from ∼7 to ∼26 nm are studied using atomic-level simulations and finite element calculations. It is demonstrated that the continuum model in the limit of an infinite rod length could be used to describe the breathing periods of nanorods with an aspect ratio as small as ∼2.5, in combination with bulk material elastic constants. The elastic moduli of gold nanorods are determined via their atomistically simulated extensional periods and the dispersion relation based on long-wavelength approximation. The twinned nanorods become stiffer as the width is reduced, which is in contrast to the size dependence of the modulus in single-crystal nanorods. Further finite element calculations for the breathing periods of nanorods are performed using isotropic elastic constants of bulk gold. We find that the breathing vibrations of the penta-twinned nanorods are more affected by the crystal structure effect than those of single-crystal nanorods, because a smaller range of crystal directions perpendicular to the long axis is involved in the breathing vibrations of twinned nanorods.

Characterizing gold nanorods in aqueous solution by acoustic vibrations probed with four-wave mixing

We demonstrate continuous-wave four-wave mixing to probe the acoustic vibrations of gold nanorods in aqueous solution. The nonlinear optical response of gold nanorods, resonantly enhanced by electrostriction coupling to the acoustic vibration modes, shows an extensional vibration which combines an expansion along the long axis with a contraction along the short axis. We also observed the extensional vibration of gold nanospheres as byproducts of the gold nanorod synthesis. Theoretical calculation of the nanoparticle size and distribution based on the vibrational frequency agrees well with the experimental results obtained from the scanning electron microscopic examination, indicating the four-wave mixing technique can provide in situ nanoparticle characterization.

Tailored Hypersound Generation in Single Plasmonic Nanoantennas

Ultrashort laser pulses impinging on a plasmonic nanostructure trigger a highly dynamic scenario in the interplay of electronic relaxation with lattice vibrations, which can be experimentally probed via the generation of coherent phonons. In this Letter, we present studies of hypersound generation in the range of a few to tens of gigahertz on single gold plasmonic nanoantennas, which have additionally been subjected to predesigned mechanical constraints via silica bridges. Using these hybrid gold/silica nanoantennas, we demonstrate experimentally and via numerical simulations how mechanical constraints allow control over their vibrational mode spectrum. Degenerate pump-probe techniques with double modulation are performed in order to detect the small changes produced in the probe transmission by the mechanical oscillations of these single nanoantennas.

Imaging nano-objects by linear and nonlinear optical absorption microscopies

Absorption based microscopy measurements are emerging as important tools for studying nanomaterials. This review discusses the three most common techniques for performing these experiments: transient absorption microscopy, photothermal heterodyne imaging, and spatial modulation spectroscopy. The focus is on the application of these techniques to imaging and detection, using examples taken from the authors' laboratory. The advantages and disadvantages of the three methods are discussed, with an emphasis on the unique information that can be obtained from these experiments, in comparison to conventional emission or scattering based microscopy experiments.

Highly sensitive transient absorption imaging of graphene and graphene oxide in living cells and circulating blood

We report a transient absorption (TA) imaging method for fast visualization and quantitative layer analysis of graphene and GO. Forward and backward imaging of graphene on various substrates under ambient condition was imaged with a speed of 2 μs per pixel. The TA intensity linearly increased with the layer number of graphene. Real-time TA imaging of GO in vitro with capability of quantitative analysis of intracellular concentration and ex vivo in circulating blood were demonstrated. These results suggest that TA microscopy is a valid tool for the study of graphene based materials.

Compressible Viscoelastic Liquid Effects Generated by the Breathing Modes of Isolated Metal Nanowires

Transient absorption microscopy is used to examine the breathing modes of single gold nanowires in highly viscous liquids. By performing measurements on the same wire in air and liquid, the damping contribution from the liquid can be separated from the intrinsic damping of the nanowire. The results show that viscous liquids strongly reduce the vibrational lifetimes but not to the extent predicted by standard models for nanomaterial-liquid interactions. To explain these results a general theory for compressible viscoelastic fluid-structure interactions is developed. The theory results are in good agreement with experiment, which confirms that compressible non-Newtonian flow phenomena are important for vibrating nanostructures. This is the first theoretical study and experimental measurement of the compressible viscoelastic properties of simple liquids.

Direct Observation of Gigahertz Coherent Guided Acoustic Phonons in Free-Standing Single Copper Nanowires

We report on gigahertz acoustic phonon waveguiding in free-standing single copper nanowires studied by femtosecond transient reflectivity measurements. The results are discussed on the basis of the semianalytical resolution of the Pochhammer and Chree equation. The spreading of the generated Gaussian wave packet of two different modes is derived analytically and compared with the observed oscillations of the sample reflectivity. These experiments provide a unique way to independently obtain geometrical and material characterization. This direct observation of coherent guided acoustic phonons in a single nano-object is also the first step toward nanolateral size acoustic transducer and comprehensive studies of the thermal properties of nanowires.