Self-assembled shells composed of colloidal particles: fabrication and characterization

Cage-like microstructures via sequential Ugi reactions in aqueous emulsions

Cage-like microstructures were obtained in two steps by sequential Ugi reactions. At the first stage, submicron colloidal particles based on carboxymethylcellulose and chitosan with a domain structure were obtained in an aqueous suspension. In the second stage, the Ugi reaction was carried out on the surface of the Pickering emulsions with toluene. Removal of toluene and redissolution in water resulted in colloidosomes with large holes on the surface. Varying the cross-link density during the Ugi reaction made it possible to obtain structures with different hole sizes.

Structure Formation in Supraparticles Composed of Spherical and Elongated Particles

We studied the evaporation-induced formation of supraparticles from dispersions of elongated colloidal particles using experiments and computer simulations. Aqueous droplets containing a dispersion of ellipsoidal and spherical polystyrene particles were dried on superamphiphobic surfaces at different humidity values that led to varying evaporation rates. Supraparticles made from only ellipsoidal particles showed short-range lateral ordering at the supraparticle surface and random orientations in the interior regardless of the evaporation rate. Particle-based simulations corroborated the experimental observations in the evaporation-limited regime and showed an increase in the local nematic ordering as the diffusion-limited regime was reached. A thin shell of ellipsoids was observed at the surface when supraparticles were made from binary mixtures of ellipsoids and spheres. Image analysis revealed that the supraparticle porosity increased with an increasing aspect ratio of the ellipsoids.

Interfacial Assembly and Jamming of Soft Nanoparticle Surfactants into Colloidosomes and Structured Liquids

Nanoparticle surfactant (NPS) offers a powerful strategy to generate all-liquid constructs that integrate the inherent properties of the NPs into 3D architectures. Here, using the co-assembly of fluorescent polymeric nanoparticles and amine-functionalized polyhedral oligomeric silsesquioxane, the assembly and jamming behavior of a new type of NPS at the oil-water interface is uncovered. Unlike "solid" inorganic nanoparticles, "soft" polymeric nanoparticles can reorganize when jammed, leading to a relaxation and deformation of the interfacial assemblies, for example, the 3D printed sugar-coated haw stick-like liquid tubules. With NPS serving as emulsifiers, stable Pickering emulsions are prepared that can be converted into robust colloidosomes with pH responsiveness, showing numerous potential applications for encapsulation and controlled release.

Hydrophobically modified chitosan biopolymer connects halloysite nanotubes at the oil-water interface as complementary pair for stabilizing oil droplets

The integration of cationic and hydrophobic functionalities into hydrophobically modified chitosan (HMC) biopolymer facilitates complementary emulsion stabilization with negatively charged halloysite clay nanotubes (HNT). Oil-in-water emulsions with smaller droplet sizes and significantly improved interfacial resistance to droplet coalescence are obtained on complementary emulsion stabilization by HNT and HMC compared to the individual emulsifiers alone. Contact angle measurements shows that the adsorption of the cationic HMC onto the negatively charged HNT modifies the surface wettability of the nanotubes, facilitating the attachment of the nanotubes to the oil-water interface. High resolution cryo-SEM imaging reveals that free HMC chains locks the nanotubes together at the oil-water interface, creating a high barrier to droplet coalescence. The emulsion stability is an order of magnitude higher for conditions in which the aqueous HNT dispersion is stabilized by the HMC compared to conditions where the negatively charged HNT is strongly flocculated by the cationic HMC. The hydrophobic interaction between HMC chains, insertion of HMC hydrophobes into the oil phase and electrostatic interactions between HMC and HNT are proposed as key mechanisms driving the increased emulsion stability. For potential application as a dispersant system for crude oil spill treatment, the nanotubular morphology of HNT was further exploited for the encapsulation of the water-insoluble surfactant, sorbitan monooleate (Span 80). The HMC and HNT sterically strengthens the oil-water interfacial layer while release of the Span 80 surfactant from the HNT lumen lowers the oil-water interfacial tension. The concepts advanced here are relevant in the development of environmentally-benign dispersants for oil spill remediation.

Biocatalytic self-assembled synthetic vesicles and coacervates: From single compartment to artificial cells

Compartmentalization is an intrinsic feature of living cells that allows spatiotemporal control over the biochemical pathways expressed in them. Over the years, a library of compartmentalized systems has been generated, which includes nano to micrometer sized biomimetic vesicles derived from lipids, amphiphilic block copolymers, peptides, and nanoparticles. Biocatalytic vesicles have been developed using a simple bag containing enzyme design of liposomes to multienzymes immobilized multi-vesicular compartments for artificial cell generation. Additionally, enzymes were also entrapped in membrane-less coacervate droplets to mimic the cytoplasmic macromolecular crowding mechanisms. Here, we have discussed different types of single and multicompartment systems, emphasizing their recent developments as biocatalytic self-assembled structures using recent examples. Importantly, we have summarized the strategies in the development of the self-assembled structure to improvise their adaptivity and flexibility for enzyme immobilization. Finally, we have presented the use of biocatalytic assemblies in mimicking different aspects of living cells, which further carves the path for the engineering of a minimal cell.

Structured micro/nano materials synthesized via electrospray: a review

The development of synthetic methods for micro/nano materials with precisely controlled structures, morphologies, and local compositions is of great importance for the advancement of modern nanotechnology. The electrospray method is a "platform" approach for the preparation of a broad range of micro-/nanostructures; electrospray is simple and scalable. This review summarizes recent research on the micro-/nanostructures prepared via the electrospray route. These include spherical structures (e.g. simple, porous, Janus, and core-shell particles), non-spherical structures (e.g. red blood cell-like and spindle-like particles, multi-compartment microrods, 2D holey nanosheets, and nanopyramids), and assembled structures. The experimental details, underlying physical/chemical principles, and key benefits of these structures are comprehensively discussed. The effects and importance of nozzle design, properties of feeding solutions (e.g. concentration of solute, polymer additives, solvent/nonsolvent combinations), working environment (e.g. temperature and humidity), and types of collection media are highlighted.

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

The potential of magnetic heating for fabricating Pickering-emulsion-based capsules

Pickering emulsions (particle-stabilized emulsions) have been widely explored due to their potential applications, one of which is using them as precursors for the formation of colloidal capsules that could be utilized in, among others, the pharmacy and food industries. Here, we present a novel approach to fabricating such colloidal capsules by using heating in the alternating magnetic field. When exposed to the alternating magnetic field, magnetic particles, owing to the hysteresis and/or relaxation losses, become sources of nano- and micro-heating that can significantly increase the temperature of the colloidal system. This temperature rise was evaluated in oil-in-oil Pickering emulsions stabilized by both magnetite and polystyrene particles. When a sample reached high enough temperature, particle fusion caused by glass transition of polystyrene was observed on surfaces of colloidal droplets. Oil droplets covered with shells of fused polystyrene particles were proved to be less susceptible to external stress, which can be evidence of the successful formation of capsules from Pickering emulsion droplets as templates.

Direction-Specific Release from Capsules with Homogeneous or Janus Shells Using an Ultrasound Approach

A variety of approaches have been developed to release contents from capsules, including techniques that use electric or magnetic fields, light, or ultrasound as a stimulus. However, in the majority of the known approaches, capsules are disintegrated in violent way and the liberation of the encapsulated material is often in a random direction. Thus, the controllable and direction-specific release from microcapsules in a simple and effective way is still a great challenge. This greatly limits the use of microcapsules in applications where targeted and directional release is desirable. Here, we present a convenient ultrasonic method for controllable and unidirectional release of an encapsulated substance. The release is achieved by using MHz-frequency ultrasound that enables the inner liquid stretching, which imposes mechanical stress on the capsule's shell. This leads to the puncturing of the shell and enables smooth liberation of the liquid payload in one direction. We demonstrate that 1-4.3 MHz acoustic waves with the intensity of a few W/cm² are capable of puncturing of particle capsules with diameters ranging from around 300 μm to 5 mm and the release of the encapsulated liquid in a controlled manner. Various aspects of our route, including the role of the capsule size, ultrasound wavelength, and intensity in the performance of the method, are studied in detail. We also show that the additional control of the release can be achieved by using capsules having patchy shells. The presented method can be used to facilitate chemical reactions in micro- and nanolitre droplets and various small-scale laboratory operations carried in bulk liquids in microenvironment. Our results may also serve as an entry point for testing other uses of the method and formulation of theoretical modeling of the presented ultrasound mechanism.

Spherical structure factor and classification of hyperuniformity on the sphere

Understanding how particles are arranged on the surface of a sphere is not only central to numerous physical, biological, soft matter, and materials systems but also finds applications in computational problems, approximation theory, and analysis of geophysical and meteorological measurements. Objects that lie on a sphere experience constraints that are not present in Euclidean (flat) space and that influence both how the particles can be arranged as well as their statistical properties. These constraints, coupled with the curved geometry, require a careful extension of quantities used for the analysis of particle distributions in Euclidean space to distributions confined to the surface of a sphere. Here, we introduce a framework designed to analyze and classify structural order and disorder in particle distributions constrained to the sphere. The classification is based on the concept of hyperuniformity, which was first introduced 15 years ago and since then studied extensively in Euclidean space, yet has only very recently been considered also for spherical surfaces. We employ a generalization of the structure factor on the sphere, related to the power spectrum of the corresponding multipole expansion of particle density distribution. The spherical structure factor is then shown to couple with cap number variance, a measure of density variations at different scales, allowing us to analytically derive different forms of the variance pertaining to different types of distributions. Based on these forms, we construct a classification of hyperuniformity for scale-free particle distributions on the sphere and show how it can be extended to include other distribution types as well. We demonstrate that hyperuniformity on the sphere can be defined either through a vanishing spherical structure factor at low multipole numbers or through a scaling of the cap number variance-in both cases extending the Euclidean definition, while at the same time pointing out crucial differences. Our work thus provides a comprehensive tool for detecting global, long-range order on spheres and for the analysis of spherical computational meshes, biological and synthetic spherical assemblies, and ordering phase transitions in spherically distributed particles.

Synthesis of Mesoporous/Macroporous Microparticles Using Three-Dimensional Assembly of Chitosan-Functionalized Halloysite Nanotubes and Their Performance in the Adsorptive Removal of Oil Droplets from Water

Halloysite nanotubes (HNTs) were assembled into mesoporous/macroporous microparticles (c-g-HNTs MPs) using Pickering template-assisted approach. To unravel the stabilization mechanism in Pickering emulsion form, several emulsions and microparticles were prepared at various conditions and visualized using confocal laser scanning microscopy. The prepared c-g-HNTs MPs were used to treat emulsified oil solutions resulting in a maximum removal efficiency of 94.47%. The kinetics data of oil adsorption onto c-g-HNTs MPs was best fitted by the pseudo-second-order kinetic model ( R² = 0.9983). The maximum monolayer adsorption capacity of oil onto c-g-HNTs MPs as predicted by the multilayer Brunauer-Emmett-Teller model was found to be 788 mg/g. Compared with pristine HNTs, c-g-HNTs MPs exhibited higher self-settleability rates in aqueous solutions as well as in emulsified oil solutions, demonstrating their candidacy for practical water treatment applications. The c-g-HNTs MPs were repeatedly used for five adsorption-desorption cycles with minimal losses noticed in their performance.

Fabrication of Protease-Sensitive and Light-Responsive Microcapsules Encompassed with Single Layer of Gold Nanoparticles by Using Self-Assembly Protein of α-Synuclein

A bioapplicable cargo delivery system requires the following characteristics of biocompatibility, in vivo stability, and selective cargo release at target sites. We introduce herein the microcapsules enclosed with a single-layered shell of gold nanoparticles (AuNPs) mutually connected by an amyloidogenic protein of α-synuclein (αS). The microcapsules were fabricated by producing oil(chloroform)-in-water Pickering emulsions of the αS-encapsulated AuNPs and subsequent molecular engagement of the outlying αS molecules, leading to formidable β-sheet formation in the presence of chloroform. The wrinkled skin of microcapsules obtained after evaporation of the internal chloroform also reflects robustness of the protein-protein interaction, which was experimentally confirmed by their rheological stability. For the emulsions loaded with rhodamine 6G, their dye release was demonstrated to be controlled by proteases. Along with their photothermal activity, the AuNP-containing microcapsules and their proteolyzed fragments were therefore suggested to be capable of eliminating aberrant cells in the protease-activated pathologically affected areas. Orthogonal cargo loading was also achieved by encapsulating both hydrophobic and hydrophilic substances either directly dissolved in chloroform or prepackaged in inverted micelles, respectively. Microcapsule's functionality was further expanded by localizing quantum dots, magnetic nanoparticles, and antibodies inside or on the surface of the microcapsules. Taken together, these multimodal AuNP microcapsules are suggested to be an ideal cargo carrier system, which could be employed in not only biomedical theranostic applications as they exhibit structural robustness, specific targeting, triggered release, and photothermal activity but also sensor development in general.

A fabrication method of gold coated colloidosomes and their application as targeted drug carriers

Colloidosomes have attracted considerable attention in recent years because of their potential applications in a range of industries, such as food, bioreactors and medicine. However, traditional polymer shell colloidosomes leak low molecular weight encapsulated materials due to their intrinsic shell permeability. Here, we report aqueous core colloidosomes coated with a gold shell, which make the capsules impermeable. The shells can be ruptured using ultrasound. The gold coated colloidosomes are prepared by making an aqueous core capsule with a polymer shell and then adding HAuCl4, surfactant and l-ascorbic acid to form a second shell. We propose to use the capsules as drug carriers. The gold coated colloidosomes demonstrate a low cytotoxicity and after triggering, both encapsulated doxorubicin and broken gold fragments kill cancer cells. In addition, we set up a targeting model by modifying the gold shell colloidosomes using 4,4'-dithiodibutyric acid and crosslinking them with proteins-rabbit immunoglobulin G (IgG). Label-free surface plasmon resonance was used to test the specific targeting of the functional gold shells with rabbit antigen. The results demonstrate that a new type of functional gold coated colloidosome with non-permeability, ultrasound sensitivity and immunoassay targeting could be applied to many medical applications.

Silver-Coated Colloidosomes as Carriers for an Anticancer Drug

Small drug molecules are widely developed and used in the pharmaceutical industry. In the past few years, loading and delivering such molecules using polymer-shell colloidosomes has attracted interest. Traditional polymer capsules fail to encapsulate low-molecular-weight materials for long times, since they are inherently porous and permeable for small molecules. In this paper, we report a method for encapsulating an anticancer drug with small molecule weight, for cell viability tests. The silver-coated colloidosomes are prepared by making an aqueous core capsule with a polymer shell and then adding AgNO₃, surfactant, and l-ascorbic acid to form a second shell. The capsules are impermeable and can be triggered using ultrasound. We propose to use the capsules as drug carriers. The silver demonstrates a low cytotoxicity for up to 10 capsules per cell. After the silver shells are triggered by ultrasound, the released doxorubicin, the broken silver fragments, and the doxorubicin loading on the capsule surface all kill cells. The results demonstrate a nonpermeable silver-shell microcapsule with ultrasound sensitivity for potential medical applications.

Pickering Emulsions Stabilized by pH-Responsive Microgels and Their Scalable Transformation to Robust Submicrometer Colloidoisomes with Selective Permeability

Colloidosomes are micrometer-sized hollow particles that have shells consisting of coagulated or fused colloid particles. While many large colloidosomes with sizes well above 1.0 μm have been prepared, there are fewer examples of submicrometer colloidosomes. Here, we establish a simple emulsion templating-based method for the preparation of robust submicrometer pH-responsive microgel colloidosomes. The colloidosomes are constructed from microgel particles based on ethyl acrylate and methacrylic acid with peripheral vinyl groups. The pH-responsive microgels acted as both a Pickering emulsion stabilizer and macro-cross-linker. The emulsion formation studies showed that the minimum droplet diameter was reached when the microgel particles were partially swollen. Microgel colloidosomes were prepared by covalently interlinking the microgels adsorbed at the oil-water interface using thermal free-radical coupling. The colloidosomes were prepared using a standard high-shear mixer with two different rotor sizes that corresponded to high shear (HS) and very high shear (VHS) mixing conditions. The latter enabled the construction of submicrometer pH-responsive microgel-colloidosomes on the gram scale. The colloidosomes swelled strongly when the pH increased to above 6.0. The colloidosomes were robust and showed no evidence of colloidosome breakup at high pH. The effect of solute size on shell permeation was studied using a range of FITC-dextran polymers, and size-selective permeation occurred. The average pore size of the VHS microgel-colloidosomes was estimated to be between 6.6 and 9.0 nm at pH 6.2. The microgel-colloidosome properties suggest that they have the potential for future applications in cosmetics, photonics, and delivery.

Responsive Particle-Stabilized Emulsions: Formation and Applications

Responsive Pickering emulsions have attracted increasing attention over the last decade. These ‘surfactant-free’ emulsions are stabilized by particulate stabilizers and their properties and stability can be controlled by applying stimuli to the system. The excellent stability of Pickering emulsions makes them even more beneficial when they are compared to conventional emulsions which are stabilized by low molecular weight surfactants or amphiphilic polymers. Different responsive Pickering emulsions systems have been developed and reported by researchers. For example, they include pH responsiveness, magnetic responsiveness, thermo-responsiveness, ion-specific systems and photo-responsiveness. In this chapter, the formation and stabilization of such emulsions are discussed, with examples of different categories of particulate stabilizers, including inorganic, biological and polymeric particles. The discussion then moves on to the applications of such responsive emulsions in the pharmaceutical industry, petroleum processing, extraction and Pickering emulsion polymerization.

Giant pH-responsive microgel colloidosomes: preparation, interaction dynamics and stability

The interactions of two oil droplets grown in the presence of swollen, lightly cross-linked cationic poly(tert-butylamino)ethyl methacrylate (PTBAEMA) microgels was monitored using a high-speed video camera. Three oils (n-dodecane, isopropyl myristate and sunflower oil) were investigated, each in the absence and presence of an oil-soluble cross-linker [tolylene 2,4-diisocyanate-terminated poly(propylene glycol), PPG-TDI]. Adsorption of the swollen microgel particles was confirmed by interfacial tension, interfacial elasticity and dilational viscosity measurements on single pendant oil droplets, and assessment of the oscillatory dynamics for coalescing droplet pairs. Like the analogous bulk emulsions, particle adsorption alone did not prevent coalescence of pairs of giant Pickering emulsion droplets. However, prior addition of surface-active PPG-TDI cross-linker to the oil phase results in the formation of highly stable microgel colloidosomes via reaction with the secondary amine groups on the PTBAEMA chains. Colloidosome stability depended on the age of the oil-water interface. This reflects a balance between the adsorption kinetics of the PPG-TDI cross-linker and the microgel particles, each of which must be present at the interface to form a stable colloidosome. Colloidosome formation was virtually instantaneous in n-dodecane, but took up to 120 s in the case of isopropyl myristate. The impact of an acid-induced latex-to-microgel transition on the interaction of giant colloidosomes (originally prepared at pH 10 using isopropyl myristate) was also studied. This acid challenge did not result in coalescence, which is consistent with a closely-related study (A. J. Morse et al., Langmuir, 2014, 30(42), 12509-12519). No evidence was observed for inter-colloidosome cross-linking, which was attributed to retention of an aqueous film between the adjacent pair of colloidosomes.

Interfacial adsorption and surfactant release characteristics of magnetically functionalized halloysite nanotubes for responsive emulsions

Magnetically responsive oil-in-water emulsions are effectively stabilized by a halloysite nanotube supported superparamagnetic iron oxide nanoparticle system. The attachment of the magnetically functionalized halloysite nanotubes at the oil-water interface imparts magnetic responsiveness to the emulsion and provides a steric barrier to droplet coalescence leading to emulsions that are stabilized for extended periods. Interfacial structure characterization by cryogenic scanning electron microscopy reveals that the nanotubes attach at the oil-water interface in a side on-orientation. The tubular structure of the nanotubes is exploited for the encapsulation and release of surfactant species that are typical of oil spill dispersants such as dioctyl sulfosuccinate sodium salt and polyoxyethylene (20) sorbitan monooleate. The magnetically responsive halloysite nanotubes anchor to the oil-water interface stabilizing the interface and releasing the surfactants resulting in reduction in the oil-water interfacial tension. The synergistic adsorption of the nanotubes and the released surfactants at the oil-water interface results in oil emulsification into very small droplets (less than 20μm). The synergy of the unique nanotubular morphology and interfacial activity of halloysite with the magnetic properties of iron oxide nanoparticles has potential applications in oil spill dispersion, magnetic mobilization and detection using magnetic fields.

Nozzleless Fabrication of Oil-Core Biopolymeric Microcapsules by the Interfacial Gelation of Pickering Emulsion Templates

Ionotropic gelation has been an attractive method for the fabrication of biopolymeric oil-core microcapsules due to its safe and mild processing conditions. However, the mandatory use of a nozzle system to form the microcapsules restricts the process scalability and the production of small microcapsules (<100 μm). We report, for the first time, a nozzleless and surfactant-free approach to fabricate oil-core biopolymeric microcapsules through ionotropic gelation at the interface of an O/W Pickering emulsion. This approach involves the self-assembly of calcium carbonate (CaCO3) nanoparticles at the interface of O/W emulsion droplets followed by the addition of a polyanionic biopolymer into the aqueous phase. Subsequently, CaCO3 nanoparticles are dissolved by pH reduction, thus liberating Ca(2+) ions to cross-link the surrounding polyanionic biopolymer to form a shell that encapsulates the oil droplet. We demonstrate the versatility of this method by fabricating microcapsules from different types of polyanionic biopolymers (i.e., alginate, pectin, and gellan gum) and water-immiscible liquid cores (i.e., palm olein, cyclohexane, dichloromethane, and toluene). In addition, small microcapsules with a mean size smaller than 100 μm can be produced by selecting the appropriate conventional emulsification methods available to prepare the Pickering emulsion. The simplicity and versatility of this method allows biopolymeric microcapsules to be fabricated with ease by ionotropic gelation for numerous applications.

Hybrid organic-inorganic colloidal composite 'sponges' via internal crosslinking

An effective method for the generation of hybrid organic-inorganic nanocomposite microparticles featuring controlled size and high structural stability is presented. In this process, an oil-in-water Pickering emulsion is formed using hydrophilic amine-functionalized silica nanoparticles. Covalent modification using a hydrophobic maleic anhydride copolymer then alters nanoparticle wettability during crosslinking, causing a core-shell to nanocomposite structural reorganization of the assemblies. The resulting porous nanocomposites maintain discrete microparticle structures and retain payloads in their oil phase even when incubated in competitive solvents such as ethanol.

Arrested coalescence behaviour of giant Pickering droplets and colloidosomes stabilised by poly(tert-butylaminoethyl methacrylate) latexes

The coalescence of two oil droplets grown at pH 10 in the presence of lightly cross-linked 260 nm diameter charge-stabilised poly(tert-butylamino)ethyl methacrylate (PTBAEMA) latexes was monitored using a high-speed video camera. Three model oils (n-dodecane, isopropyl myristate and sunflower oil) were investigated, each in the absence and presence of an oil-soluble cross-linker [tolylene 2,4-diisocyanate-terminated poly(propylene glycol), PPG-TDI]. In the absence of PPG-TDI, rapid coalescence was observed for giant PTBAEMA-stabilised Pickering oil droplets, which exhibited faster coalescence times compared to bare oil droplets. However, an increase in the damping coefficients for coalescing Pickering droplets (compared to those of bare oil droplets) indicated PTBAEMA latex particle adsorption. Addition of PPG-TDI cross-linker to oil droplets in the absence of latex particles led to a reduction in the interfacial tension confirming its surface-active nature. The oil-soluble PPG-TDI reacts with the secondary amine groups on the PTBAEMA latex, producing giant colloidosomes that remain stable to coalescence when brought into contact. This stability to coalescence was not observed for bare oil droplets in the presence of PPG-TDI, confirming that the cross-linked latex particles at the interface provide the additional stability. Finally, interactions between asymmetric n-dodecane droplets were examined. Adding oil-soluble cross-linker to only one droplet resulted in "arrested coalescence" behaviour in the presence of PTBAEMA latex particles. In this context, the droplet ageing time was found to be critical and is attributed to the relatively slow particle adsorption kinetics. Ageing times of less than 60 s led to catastrophic droplet coalescence, whereas ageing times longer than 60 s indicated cross-linker diffusion from one droplet to the other, which produced inter-cross-linked colloidosomes. Arrested coalescence was only observed for ageing times of approximately 60 s.

Electroformation of Janus and patchy capsules

Janus and patchy particles have designed heterogeneous surfaces that consist of two or several patches with different materials properties. These particles are emerging as building blocks for a new class of soft matter and functional materials. Here we introduce a route for forming heterogeneous capsules by producing highly ordered jammed colloidal shells of various shapes with domains of controlled size and composition. These structures combine the functionalities offered by Janus or patchy particles, and those given by permeable shells such as colloidosomes. The simple assembly route involves the synergetic action of electro-hydrodynamic flow and electro-coalescence. We demonstrate that the method is robust and straightforwardly extendable to production of multi-patchy capsules. This forms a starting point for producing patchy colloidosomes with domains of anisotropic chemical surface properties, permeability or mixed liquid-solid phase domains, which could be exploited to produce functional emulsions, light and hollow supra-colloidosome structures, or scaffolds.

Formation of hybrid poly(styrene-co-maleic anhydride)–silica microcapsules

A technique for the micro-encapsulation of a contamination-free aqueous droplet is presented.

Supramolecular colloidosomes: fabrication, characterisation and triggered release of cargo

Supramolecular colloidosomes are self-assembled at the interface of microfluidic droplets via a cucurbit[8]uril host–guest complex, allowing for triggered release of aqueous cargo.

Nanoparticle-filled complex colloidosomes for tunable cargo release

Capsules with a shell made out of nanoparticles, so-called colloidosomes, are very interesting for controlled encapsulation and release because of their selectively permeable shell, their mechanical stability, and the possibility to make them from many materials. Here, we report the creation of complex colloidosomes that can release encapsulated cargo on-demand in single or multiple release events. Unprecedented on-demand, multiple release is achieved by incorporating functional nanoparticles within the colloidosome hollow core. The entrapped nanoparticles enable pH-triggered release by either swelling to rupture the capsule shell in one single event or desorbing on-demand cargo molecules initially adsorbed on their surface. Implementation of such mechanisms in capsules with magnetically responsive shells enabled the creation of colloidosomes exhibiting unique spatiotemporal control of cargo release.