Phase behavior of cationic hydroxyethyl cellulose-sodium dodecyl sulfate mixtures: effects of molecular weight and ethylene oxide side chain length of polymers

Homogeneous synthesis of cationic celluloses with broad-spectrum antibacterial activities for the treatment of vaginitis in mice

Microbial infection is a significant health issue for humans. Despite the development of numerous antibiotics, the continuous rise of drug-resistant bacteria highlights the urgent need for new materials to combat these problems. In this study, four water-soluble quaternized cellulose (QC) derivatives with degrees of substitution (DS) ranging from 0.23 to 0.45 were synthesized homogeneously from cellulose carbamate (CC) in NaOH/ZnO aqueous solution. The QC derivatives exhibited broad-spectrum antibacterial activity against gram-negative/positive bacteria, fungi and drug-resistance bacteria. Models of bacterial vaginitis (BV) and vulvovaginal candidiasis (VVC) were used to evaluate the application of QC derivatives visually. Secretion smears and tissue section staining revealed that treatment with QC derivatives led to a reduction in mycelia and spores in the vagina and secretions in the VVC model, along with improved inflammation. In the BV model, vaginal secretions were reduced, clue cells in smears significantly decreased, and inflammation markedly improved. Additionally, cell experiments and staining of mouse organ tissue sections demonstrated that QC derivatives exhibited good biocompatibility. Therefore, using QC derivatives in flushing douches represents a novel approach for treating vaginitis and could serve as a benchmark for addressing other infectious diseases.

Steady Shear Rheology and Surface Activity of Polymer-Surfactant Mixtures

Understanding the interactions between polymers and surfactants is critical for designing advanced fluid systems used in applications such as enhanced oil recovery, drilling, and chemical processing. This study examines the effects of five surfactants: two anionic (Stepanol WA-100 and Stepwet DF-95), one cationic (HTAB), one zwitterionic (Amphosol CG), and one non-ionic (Alfonic 1412-3 Ethoxylate), on the steady shear rheology and surface activity of two polymers, namely cationic hydroxyethyl cellulose based polymer (LR-400) and anionic polyacrylamide based polymer (Praestol 2540TR). The polymer-surfactant solutions behave as shear-thinning fluids and follow the power-law model. Anionic surfactants exhibit a strong effect on the rheology of cationic polymer LR-400 solution. The consistency index rises sharply with the increase in surfactant concentration. Also, the solutions become highly shear-thinning with the increase in surfactant concentration. The effects of other surfactants on the rheology of cationic polymer solution are small to modest. None of the surfactants investigated exhibit a strong influence on the rheology of anionic polymer Praestol 2540TR. Only weak to modest effects of surfactants are observed on the rheology of anionic polymers. The surface tension of the polymer-surfactant solution decreases with the increase in surfactant concentration. Zwitterionic surfactant Amphosol CG is found to be most effective in reducing the surface tension at a given concentration in ppm. This surfactant also raises the electrical conductivity of the solution to the largest extent. From the changes in slope of surface tension versus surfactant concentration plots, the approximate values of critical aggregation concentration (CAC) and polymer saturation point (PSP) are estimated.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

Controlling the Emulsion Type Using Adjustable Polyelectrolyte-Surfactant Complexes

The combination of polyelectrolytes and ionic surfactants in precise proportions presents the possibility of producing a new class of emulsifiers with tunable emulsification properties. We use chitosan along with dioctyl sulfosuccinate sodium, also known as aerosol-OT (AOT), to demonstrate that emulsion types can be varied, and phase inversion emulsification (PIE) can be induced via changes in the water-phase pH and the molar ratio of the surfactant to the repeat unit of the polyelectrolyte. Confocal microscopy of the emulsions shows that the morphology can be changed from O/W to O/W/O to W/O by varying the surfactant to polyelectrolyte molar ratio at a fixed aqueous-phase pH while maintaining droplet sizes in the range of micrometers to tens of micrometers. Measurements of the oil (toluene)-water partition coefficient suggest that controlling the emulsion type relies on the ability of the surfactants to partition from the bulk oil to the bulk water phase and to induce polyelectrolyte-surfactant aggregation. We confirm this hypothesis using different combinations of polyelectrolytes and surfactants. Changes in the water-phase pH in situ induce phase inversion only in a particular direction, which suggests that the complexes at the interface are in a kinetically trapped state. Changes in the molar ratio in situ by addition of an oppositely charged surfactant also can induce phase inversion.

Growth of wormlike micelles of surfactant induced by embedded polymer: role of polymer chain length

Incorporation of polymer chains into wormlike surfactant micelles, which find a large range of applications, offers the opportunity to modify their structure and properties. In this paper, using spectroscopic, scattering and rheological techniques and computer simulations, we study the incorporation of poly(4-vinylpyridine) of two different molecular weights (MWs) into entangled networks of wormlike surfactant micelles of potassium oleate. Using NMR-spectroscopy we show that, independent of its MW, the polymer incorporates into the core-corona interface of the surfactant micelles. According to SANS data, the polymer does not alter the micelle structure or the micelle radius, but diminishes the packing density of the surfactant. At the same time, rheology reveals a stark difference between the surfactant networks with embedded polymers of different MWs. Networks with the higher-MW polymer possess larger viscosity and a longer relaxation time, which we attribute to the larger length of the hybrid micelles. Moreover, we demonstrate that in an intermediate concentration range the higher-MW polymer is able to link neighbouring surfactant micelles together, which has never been previously observed. However, with a further increase in polymer content the micelles become smaller due to the high breaking susceptibility of the boundaries of polymer-containing sections, leading to the stabilization of micellar end-caps by the embedded macromolecules. This process is more prominent in the case of the shorter polymer. Our finding that an increased MW of macromolecules permits the formation of longer hybrid micelles and enhances their rheological properties is of obvious importance for the fundamental understanding of polymer-surfactant interactions and the development of new industrial formulations based on hybrid polymer-wormlike surfactant micelles.

Poly(allylamine)/tripolyphosphate coacervates enable high loading and multiple-month release of weakly amphiphilic anionic drugs: an in vitro study with ibuprofen

When synthetic polyamines, such poly(allylamine hydrochloride) (PAH), are mixed with crosslink-forming multivalent anions, they can undergo complex coacervation. This phenomenon has recently been exploited in various applications, ranging from inorganic material synthesis, to underwater adhesion, to multiple-month release of small, water-soluble molecules. Here, using ibuprofen as a model drug molecule, we show that these coacervates may be especially effective in the long-term release of weakly amphiphilic anionic drugs. Colloidal amphiphile/polyelectrolyte complex dispersions are first prepared by mixing the amphiphilic drug (ibuprofen) with PAH. Pentavalent tripolyphosphate (TPP) ions are then added to these dispersions to form ibuprofen-loaded PAH/TPP coacervates (where the strongly-binding TPP displaces the weaker-bound ibuprofen from the PAH amine groups). The initial ibuprofen/PAH binding leads to extremely high drug loading capacities (LC-values), where the ibuprofen comprises up to roughly 30% of the coacervate mass. Conversely, the dense ionic crosslinking of PAH by TPP results in very slow release rates, where the release of ibuprofen (a small, water-soluble drug) is extended over timescales that exceed 6 months. When ibuprofen is replaced with strong anionic amphiphiles, however (i.e., sodium dodecyl sulfate and sodium dodecylbenzenesulfonate), the stronger amphiphile/polyelectrolyte binding disrupts PAH/TPP association and sharply increases the coacervate solute permeability. These findings suggest that: (1) as sustained release vehicles, PAH/TPP coacervates might be very attractive for the encapsulation and multiple-month release of weakly amphiphilic anionic payloads; and (2) strong amphiphile incorporation could be useful for tailoring PAH/TPP coacervate properties.

Gel-like coacervates prepared through ionotropic gelation enable very high loading and multiple-month release of weakly amphiphilic small molecules. Conversely, strong amphiphile incorporation disrupts ionic crosslinking and strikingly alters the coacervate properties.

The influence of cellulosic coacervate composition on the flux of an entrained agent through a coacervate/sebum barrier

Complex coacervation is the primary mechanism used in rinse-off formulations to deliver topical agents to the skin and hair; this process produces polycation-surfactant anion coacervates that entrain the agent and enhance its substantivity at these sites. This study investigates the relationship between the transport of agents released from a coacervate vehicle into artificial sebum and the coacervate's composition and properties. The flux of a model compound, kinetin, through a variety of cellulosic coacervate/sebum composite barriers prepared on cell culture inserts was determined. These values were interpreted according to a semi-empirical model based on the composition of the coacervate, polymer properties, and the material stiffness. A multivariate analysis using composition and polymer descriptors yielded a strong correlation (r²=0.72) to the experimental kinetin transport data. Variables that describe the degree of entanglement of the surfactant-linked polymer chain web (specifically, the molar ratio of anions to cations and wt% water) emerged as important predictive variables for kinetin transport. According to the developed model, compositional or ingredient manipulations that expand and untangle the web favor a more rapid release of entrained agents from the coacervate into sebum and, consequently, higher bioavailability on the skin surface.

Evaluating the Transport Kinetics of a Model Compound Released From Cellulosic Coacervate Compositions Into Artificial Sebum

Complex coacervates of cationic polymers and anionic surfactants, which are produced spontaneously during the use of rinse-off formulations, represent an important delivery vehicle for topical agents to the skin surface and appendages. In this study, an artificial sebum-loaded cell culture insert method for determining the sebum diffusion properties of topical agents was optimized for in vitro release testing. This method was subsequently used to evaluate the transport kinetics of a model compound, kinetin, released from semi-solid coacervate formulations into sebum. Coacervate compositions were prepared with cationic-hydroxyethyl cellulose dodecyl sulfate (cat-HECDS), sodium dodecyl sulfate (NaDS), and water. Tested compositions ranged from 90 to 50 wt% water and had a cat-HECDS to NaDS wt% ratio of 2:1, 1:1, or 1:2, mimicking the in vivo hydration range and relative excess surfactant content expected from commercial rinse-off formulations. Steady-state flux of the model compound from each coacervate composition was found to vary with water content of the composition. When flux was plotted versus [(cat-HECDS:NaDS) × (1 - weight fraction water)]^-1, a strong linear correlation (R² = 0.89) emerged. The in vitro release testing method proved capable of discriminating between clinically relevant differences in transport kinetics from different coacervate formulations using a practical sample size.

Recent progress of the characterization of oppositely charged polymer/surfactant complex in dilution deposition system

A mixture of oppositely charged polymer and surfactants changes the solubilized state, having a complex precipitation region at the composition of electric neutralization. This complex behavior has been applied to surface modification in the fields of health care and cosmetic products such as conditioning shampoos, as a dilution-deposition system in which the polymer/surfactant mixture at the higher surfactant concentration precipitates the insoluble complex by dilution. A large number of studies over many years have revealed the basic coacervation behavior and physicochemical properties of complexes. However, the mechanism by which a precipitated complex performs surface modification is not well understood. The precipitation region and the morphology of precipitated complex that are changed by molecular structure and additives affect the performance. Hydrophilic groups such as the EO unit in polymers and surfactants, the mixing of nonionic or amphoteric surfactant and nonionic polymer, and the addition of low polar solvent influence the complex precipitation region. Furthermore, the morphology of precipitated complex is formed by crosslinking and aggregating among polymers in the dilution process, and characterizes the performance of products. The polymer chain density in precipitated complex is determined by the charges of both the polymer and surfactant micelle and the conformation of polymer. As a result, the morphology of precipitated complexes is changed from a closely packed film to looser meshes, and/or to small particles, and it is possible for the morphology to control the rheological properties and the amount of adsorbed silicone. In the future, further investigation of the relationships between the morphology and performance is needed.

Thermo-responsive hydrogels from cellulose-based polyelectrolytes and catanionic vesicles for biomedical application

In this study, negatively charged catanionic vesicles/hydrophobically modified hydroxyethylcellulose polymers thermo-responsive hydrogels have been fabricated. Vesicular aggregates were found to act as multifunctional junctions for networking of modified-cellulose water solutions. The contributions of the electrostatic and hydrophobic interactions were evaluated by changing either vesicles composition or the polymer hydrophobic substitution. Thermal-induced size and lamellarity of hydrogel-enclosed vesicles were detected, with further polygonal shape changes induced by cellulose-based polymer addition. The thermal transition was also found to tune hydrogel mechanical behaviour. The network formation was further assessed through molecular insights, which allow to determine the arrangement of the polymer chains on the vesicles' surface. The examined systems exhibited interesting thermo-responsive characteristics. Thus, vesicularly cross-linked hydrogels herein presented can offer a wide variety of applications, i.e. in biomedical field, as multi-drug delivery systems, thanks to their ability to provide for different environments to guest molecules, comprising bulk water, vesicles' interior and bilayers, sites on polymeric chains. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1668-1679, 2016.

Current applications of foams formed from mixed surfactant-polymer solutions

Foams cannot be generated without the use of special foaming agents, as pure liquids do not foam. The most common foaming agents are surfactants, however often for foam stability one active agent is not enough, it is necessary to add other component to increase foam lifetime. Foams on everyday use are mostly made from mixture of different components. Properly chosen combinations of two active ingredients lead to a faster foam formation and increased foam stability. During the last decade polymers (mainly polyelectrolytes and proteins) have become frequently used additives to foaming solutions. Mixtures of surfactants and polymers often demonstrate different foaming properties in comparison to surfactant only or polymer only solutions. The nature of surfactant-polymer interactions is complicated and prediction of resulting foaming properties of such formulations is not straightforward. Properties and foaming of surfactant-polymer mixtures are discussed as well as current applications of foams and foaming agents as foams are widely used in cosmetics, pharmaceutics, medicine and the food industry.

Adsorption and viscoelastic analysis of polyelectrolyte-surfactant complexes on charged hydrophilic surfaces

The aggregation of surfactants around oppositely charged polyelectrolytes brings about a peculiar bulk phase behavior of the complex, known as coacervation, and can control the extent of adsorption of the polyelectrolyte at an aqueous-solid interface. Adsorption kinetics from turbid premixed polyelectrolyte-surfactant mixtures have been difficult to measure using optical techniques such as ellipsometry and reflectometry, thus limiting the correlation between bulk phases and interfacial adsorption. Here, we investigated the adsorption from premixed solutions of a cationic polysaccharide (PQ10) and the anionic surfactant sodium dodecyl sulfate (SDS) on an amphoteric alumina surface using quartz crystal microbalance with dissipation (QCMD). The surface charge on the alumina was tuned by changing the pH of the premixed solutions, allowing us to assess the role of electrostatic interactions by studying the adsorption on both negatively and positively charged surfaces. We observed a maximum extent of adsorption on both negatively and positively charged surfaces from a solution corresponding to the maximum turbidity. Enhanced adsorption upon diluting the redissolved complexes at a high SDS concentration was seen only on the negatively charged surface, and not on the positively charged one, confirming the importance of electrostatic interactions in controlling the adsorption on a hydrophilic charged surface. Using the Voight based viscoelastic model, QCMD also provided information on the effective viscosity, effective shear modulus, and thickness of the adsorbed polymeric complex. The findings of viscoelastic analysis, corroborated by atomic force microscopy measurements, suggest that PQ10 by itself forms a flat, uniform layer, rigidly attached to the surface. The PQ10-SDS complex shows a heterogeneous surface structure, where the underlayer is relatively compact and tightly attached and the top is a loosely bound diffused overlayer, accounting for most of the adsorbate, which gets washed away upon rinsing. Understanding of the surface structure will have important implications toward understanding lubrication.

Formation of liquid-crystalline structures in the bile salt-chitosan system and triggered release from lamellar phase bile salt-chitosan capsules

Nanostructured capsules comprised of the anionic bile salt, sodium taurodeoxycholate (STDC), and the biocompatible cationic polymer, chitosan, were prepared to assess their potential as novel tailored release nanomaterials. For comparison, a previously studied system, sodium dodecyl sulfate (SDS), and polydiallyldimethylammonium chloride (polyDADMAC) was also investigated. Crossed-polarizing light microscopy (CPLM) and small-angle X-ray scattering (SAXS) identified the presence of lamellar and hexagonal phase at the surfactant-polymer interface of the respective systems. The hydrophobic and electrostatic interactions between the oppositely charged components were studied by varying temperature and salt concentration, respectively, and were found to influence the liquid-crystalline nanostructure formed. The hexagonal phase persisted at high temperatures, however the lamellar phase structure was lost above ca. 45 °C. Both mesophases were found to dissociate upon addition of 4% NaCl solution. The rate of release of the model hydrophilic drug, Rhodamine B (RhB), from the lamellar phase significantly increased in response to changes in the solution conditions studied, suggesting that modulating the drug release from these bile salt-chitosan capsules is readily achieved. In contrast, release from the hexagonal phase capsules had no appreciable response to the stimuli applied. These findings provide a platform for these oppositely charged surfactant and polymer systems to function as stimuli-responsive or sustained-release drug delivery systems.

Adsorption of mixtures of poly(amidoamine) dendrimers and sodium dodecyl sulfate at the air-water interface

We relate the adsorption from mixtures of well-defined poly(amidoamine) (PAMAM) dendrimers of generations 4 and 8 with sodium dodecyl sulfate (SDS) at the air-water interface to the bulk solution properties. The anionic surfactant shows strong attractive interactions with the cationic dendrimers at pH 7, and electrophoretic mobility measurements indicate that the association is primarily driven by electrostatic interactions. Optical density measurements highlight the lack of colloidal stability of the formed bulk aggregates at compositions close to charge neutrality, the time scale of which is dependent on the dendrimer generation. Adsorption at the air-water interface was followed from samples immediately after mixing using a combination of surface tension, neutron reflectometry, and ellipsometry measurements. In the phase separation region for dendrimers of generation 4, we observed high surface tension corresponding to a depleted surfactant solution but only when the aggregates carried an excess of surfactant. Interestingly, these depleted adsorption layers contained spontaneously adsorbed macroscopic aggregates, and these embedded particles do not rearrange to spread monomeric material at the interface. These findings are discussed in relation to the interfacial properties of mixtures involving dendrimers of generation 8 as well as polydisperse linear and hyperbranched polyelectrolytes where there is polyelectrolyte bound to a surfactant monolayer. The results presented here demonstrate the capability of dendrimers to sequester anionic surfactants in a controllable manner, with potential applications as demulsification and antifoaming agents.

Control of Rheological Behaviour with Oppositely Charged Polyelectrolyte Surfactant Mixtures

Mixtures of the cationic, cellulose based polyelectrolyte JR 400 and the anionic surfactant sodium dodecylbenzene sulfonate (LAS) have been used to control the rheological behaviour of aqueous solutions. Around charge equilibrium precipitation takes place, but both for the surfactant-rich and the polymer-rich side homogeneous solutions are formed. In these monophasic regions the rheology depends strongly on the mixing ratio between the two components and highly viscous systems can be obtained on the polyelectrolyte rich side upon the addition of relatively small amounts of surfactant. Here the viscosity increases by more than four orders of magnitude before reaching the phase boundary of precipitation. Small-angle neutron scattering (SANS) showed the formation of an interconnected network of rodlike aggregates composed of a polyelectrolyte/surfactant complex, which explains the observed high viscosity due to the high degree of interconnection by the polyelectrolyte.

Characterization of polyelectrolyte features in polysaccharide systems and mucin

This review elucidates several aspects on the behavior of charged polysaccharides and mucin. Viscosification of dilute aqueous solutions of hyaluronan (HA) occurs in the course of time at low shear flow, whereas shear thinning as time evolves is found at moderate shear rates. Hydrogen bonds and electrostatic interaction play an important role for the emergence of these features. No time effect of the viscosity is observed for semidilute HA solutions. A degradation of HA is observed at low and high pH and this effect continues over long times, and it is only in the approximate interval 5<pH<10 that HA is stable. Small angle neutron scattering (SANS) measurements on semidilute aqueous solutions of mucin at pH=7 reveal a fractal dimension of 1.4, and the effect of temperature is insignificant on the fractal structure. This suggests that the mucin chains on a semi-local dimensional scale are rod-like. From various experimental methods on solutions of mucin it was found that at pH values around 2 (uncharged polymer), the intensive hydrophobic interactions lead to large association complexes, whereas at pH>>2 the negative charges suppress the tendency of forming associations. At pH<2, the mucin chains are compressed and they are decorated by some positive charges. In the semidilute regime, a fragmented network is developed. The intense association in semidilute solutions of mucin at pH=2 is further supported by the results from rheo-small angle light scattering measurements. Effects of ionic strength on the radius of gyration (R(g)) for dilute solutions of HA (pH=7) and positively charged hydroxyethylcellulose (HEC(+)) are studied with the aid of Monte Carlo simulations, and essential features of the polyelectrolyte effect on R(g) are captured in the computer simulation. Strong interactions are observed in aqueous mixtures of an anionic polysaccharide (HEC(-)) and an oppositely charged surfactant (cetyltrimethylammonium bromide; CTAB); this gives rise to extensive associations and macroscopic phase separation is approached. The massive association complexes are disclosed in the SANS experiments by a pronounced upturn in the scattered intensity at low values of the wave vector.

Complexes of surfactants with oppositely charged polymers at surfaces and in bulk

Addition of surfactants to aqueous solutions of polyelectrolytes carrying an opposite charge causes the spontaneous formation of complexes in the bulk phase in certain concentration ranges. Under some conditions, compact monodisperse multichain complexes are obtained in the bulk. The size of these complexes depends on the mixing procedure and it can be varied in a controlled way from nanometers up to micrometers. The complexes exhibit microstructures analogous to those of the precipitates formed at higher concentrations. In other cases, however, the bulk complexes are large, soft and polydisperse. In most cases, the dispersions are only kinetically stable and exhibit pronounced non-equilibrium features. Association at air-water interfaces readily occurs, even at very small concentrations. When the surfactant concentration is small, the surface complexes are usually made of a surfactant monolayer to which the polymer binds and adsorbs in a flat-like configuration. However, under some conditions, thicker layers can be found, with bulk complexes sticking to the surface. The association at solid-water interfaces is more complex and depends on the specific interactions between surfactants, polymers and the surface. However, the behaviour can be understood if distinctions between hydrophilic surfaces and hydrophobic surfaces are made. Note that the behaviour at air-water interfaces is closer to that of hydrophobic than that of hydrophilic solid surfaces. The relation between bulk and surface complexation will be discussed in this review. The emphasis will be given to the results obtained by the teams of the EC-funded Marie Curie RTN "SOCON".

Complexation of oppositely charged polyelectrolytes and surfactants in aqueous solutions. A review

Addition of surfactants to aqueous solutions of polyelectrolytes causes the spontaneous formation of complexes in a certain range of concentrations. In some conditions, compact monodisperse multichain complexes are obtained (short surfactant chain length and polymer rigid enough). The size of the complexes can be varied in controlled way from nanometers up to micrometers, but depends on the mixing procedure, whereas the shape of the complexes depends on the polymer backbone rigidity. These complexes exhibit microstructures analogue to that of the precipitates formed at higher concentrations. In most cases, however, the complexes are large, soft and polydisperse.

Homogeneous quaternization of cellulose in NaOH/urea aqueous solutions as gene carriers

Quaternized celluloses (QCs) were homogeneously synthesized by reacting cellulose with 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHPTAC) in NaOH/urea aqueous solutions. The structure and solution properties of the QCs were characterized by using elemental analysis, FTIR, (13)C NMR, SEC-LLS, viscometer, and zeta-potential measurement. The results revealed that water-soluble QCs, with a degree of substitution (DS) value of 0.20-0.63, could be obtained by adjusting the molar ratio of CHPTAC to anhydroglucose unit (AGU) of cellulose and the reaction time. The QC solutions in water displayed a typical polyelectrolyte behavior, and the intrinsic viscosity ([eta]) value determined from the Fuoss-Strauss method increased with increasing DS value. Moreover, two QC samples (DS = 0.46 and 0.63) were selected and studied as gene carriers. The results of gel retardation assay suggested that QCs could condense DNA efficiently. QCs displayed relatively lower cytotoxicity as compared with PEI, and QC/DNA complexes exhibited effective transfection compared to the naked DNA in 293T cells. The quaternized cellulose derivatives prepared in NaOH/urea aqueous solutions could be considered as promising nonviral gene carriers.

Aggregate formation in aqueous solutions of carboxymethylcellulose and cationic surfactants

The addition of cationic surfactants to an aqueous solution of an anionic polymer, carboxymethylcellulose (carboxyMC), causes the spontaneous formation of aggregates in a certain range of concentrations. Here we studied two surfactants, dodecyl and hexadecyl trimethylammonium bromide (DTAB and CTAB, respectively). Using different techniques (light scattering, potentiometry, viscosimetry, and zetametry), we found that a simple lengthening of the surfactant tail length by four CH2 groups drastically changes the aggregate morphology, size, and charge. We explored in detail how the surfactant and polymer concentrations act on these systems.

Nanostructures of colloidal complexes formed in oppositely charged polyelectrolyte/surfactant dilute aqueous solutions

Small-angle neutron scattering measurements were performed on dilute solutions of carboxymethylcellulose/DTAB complexes in water in order to determine their size, shape and internal structures. At low polymer content, the complexes are spherical, rather monodisperse and probably made of polymer chains intercalated between surfactant micelles. Moreover, we show that these micelles have a similar cubic arrangement than found in polymer/surfactant precipitates formed at higher surfactant concentrations. At larger polymer content, in the semi-dilute polyelectrolyte regime, the complexes are larger, softer and polydisperse. However, they possess a similar internal structure in both regimes. Carboxymethylcellulose/CTAB complexes are also large, soft and polydisperse but do not seem to exhibit well-defined internal structures.

Thermodynamics of Self-Assembling of Hydrophobically Modified Cationic Polysaccharides and Their Mixtures with Oppositely Charged Surfactants in Aqueous Solution

Microcalorimetric techniques, combined with turbidity measurements, were used to study the thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution. The studied polyelectrolytes were a series of polymers based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. The parameters for their micellization process are evaluated from the results of the observed dilution enthalpy curves and compared with those of the related cationic surfactants (DTAC and CTAC). The microcalorimetric results for the mixed systems (polyelectrolytes with oppositely charged surfactants) are used along with turbidity measurements to characterize systematically the thermodynamics of their interaction. The phase behavior is described and the interaction enthalpies are derived from the differences between the observed enthalpy curves with and without polyelectrolyte. Therefore, we discuss in detail the effect of changing the alkyl chain length of polyelectrolyte pendant groups, the molecular weight of the dextran backbone, and the temperature of the measurements on the interactions between polyelectrolyte and surfactant.