Human serum albumin self-assembly on weak polyelectrolyte multilayer films structurally modified by pH changes

Improving dental epithelial junction on dental implants with bioengineered peptides

Introduction: The functionalization of titanium (Ti) and titanium alloys (Ti6Al4V) implant surfaces via material-specific peptides influence host/biomaterial interaction. The impact of using peptides as molecular linkers between cells and implant material to improve keratinocyte adhesion is reported. Results: The metal binding peptides (MBP-1, MBP-2) SVSVGMKPSPRP and WDPPTLKRPVSP were selected via phage display and combined with laminin-5 or E-cadherin epithelial cell specific peptides (CSP-1, CSP-2) to engineer four metal-cell specific peptides (MCSPs). Single-cell force spectroscopy and cell adhesion experiments were performed to select the most promising candidate. In vivo tests using the dental implant for rats showed that the selected bi functional peptide not only enabled stable cell adhesion on the trans-gingival part of the dental implant but also arrested the unwanted apical migration of epithelial cells. Conclusion: The results demonstrated the outstanding performance of the bioengineered peptide in improving epithelial adhesion to Ti based implants and pointed towards promising new opportunities for applications in clinical practice.

Control of Specific/Nonspecific Protein Adsorption: Functionalization of Polyelectrolyte Multilayer Films as a Potential Coating for Biosensors

Control of nonspecific/specific protein adsorption is the main goal in the design of novel biomaterials, implants, drug delivery systems, and sensors. The specific functionalization of biomaterials can be achieved by proper surface modification. One of the important strategies is covering the materials with functional coatings. Therefore, our work aimed to functionalize multilayer coating to control nonspecific/specific protein adsorption. The polyelectrolyte coating was formed using a layer-by-layer technique (LbL) with biocompatible polyelectrolytes poly-L-lysine hydrobromide (PLL) and poly-L-glutamic acid (PGA). Nonspecific protein adsorption was minimized/eliminated by pegylation of multilayer films, which was achieved by adsorption of pegylated polycations (PLL-g-PEG). The influence of poly (ethylene glycol) chain length on eliminating nonspecific protein adsorption was confirmed. Moreover, to achieve specific protein adsorption, the multilayer film was also functionalized by immobilization of antibodies via a streptavidin bridge. The functional coatings were tested, and the adsorption of the following proteins confirmed the ability to control nonspecific/specific adsorption: human serum albumin (HSA), fibrinogen (FIB), fetal bovine serum (FBS), carcinoembryonic antigen human (CEA) monitored by quartz crystal microbalance with dissipation (QCM-D). AFM imaging of unmodified and modified multilayer surfaces was also performed. Functional multilayer films are believed to have the potential as a novel platform for biotechnological applications, such as biosensors and nanocarriers for drug delivery systems.

Effect of Multilayer Termination on Nonspecific Protein Adsorption and Antifouling Activity of Alginate-Based Layer-by-Layer Coatings

Layer-by-layer (LbL) assembly is a versatile platform for applying coatings and studying the properties of promising compounds for antifouling applications. Here, alginate-based LbL coatings were fabricated by alternating the deposition of alginic acid and chitosan or polyethylenimine to form multilayer coatings. Films were prepared with either odd or even bilayer numbers to investigate if the termination of the LbL coatings affects the physicochemical properties, resistance against the nonspecific adsorption (NSA) of proteins, and antifouling efficacy. The hydrophilic films, which were characterized using spectroscopic ellipsometry, water contact angle goniometry, ATR-FTIR spectroscopy, AFM, XPS, and SPR spectroscopy, revealed high swelling in water and strongly reduced the NSA of proteins compared to the hydrophobic reference. While the choice of the polycation was important for the protein resistance of the LbL coatings, the termination mattered less. The attachment of diatoms and settling of barnacle cypris larvae revealed good antifouling properties that were controlled by the termination and the charge density of the LbL films.

Albumin-based fluorescence resonance energy transfer nanoprobes for multileveled tumor tissue imaging and dye release imaging

Tumor tissue imaging and drug release imaging are both crucial for tumor imaging and image-guided drug delivery. It is urgent to develop a multileveled tumor imaging platform to realize the multiple imaging applications. In this work, we synthesized an albumin-based fluorescence resonance energy transfer (FRET) probe Cy5/7@HSA NPs containing two near-infrared cyanine dyes (CyBI5 and CyBI7) with high FRET efficiency (97 %). Excellent brightness and efficient FRET inside Cy5/7@HSA NPs enabled high-sensitive cell imaging and tumor imaging. This unique nanoprobe imaged 4T1 tumor-bearing mice with high sensitivity (TBR = 5.2) at 24 h post-injection and the dyes penetrated the tumor interior around 4 h post-injection. The release of dyes from nanoprobes was also tracked. This result shows the strong potential of this albumin-based FRET nanoprobe as multileveled tumor imaging platform for in vivo tumor imaging, drug delivery and image-guided surgery.

Layer-by-layer films of polysaccharides modified with polyethylene glycol and dextran

Layer-by-layer (LbL) films with enhanced resistance to protein adsorption were obtained on the basis of N-grafted copolymers of chitosan with polyethylene glycol (PEG) or dextran (DEX). The copolymers with the backbone molecular weight of 18 and 450 kDa, side chains of PEG of 5.0 and 0.9 kDa, DEX of 6.0 kDa and the degree of amine groups substitution χ_Sub as high as ∼0.25 were alternated with dextran sulfate (DS) to assemble up to 10 bilayer films. The film material contains 85±5% of water with virtually no effect of the copolymer structure. By utilizing the graft copolymers and applying suitable number of copolymer/DS bilayers to the surface, the mass of adsorbed fetal bovine serum proteins was decreased by 70-85% as compared to that on unmodified chitosan/DS film. In terms of overlapping side chains on the LbL surface the copolymers of PEG and DEX are equally effective in tailoring protein-resistant materials.

Integrating Proteins in Layer-by-Layer Assemblies Independently of their Electrical Charge

Layer-by-layer (LbL) assembly is an attractive method for protein immobilization at interfaces, a much wanted step for biotechnologies and biomedicine. Integrating proteins in LbL thin films is however very challenging due to their low conformational entropy, heterogeneous spatial distribution of charges, and polyampholyte nature. Protein-polyelectrolyte complexes (PPCs) are promising building blocks for LbL construction owing to their standardized charge and polyelectrolyte (PE) corona. In this work, lysozyme was complexed with poly(styrenesulfonate) (PSS) at different ionic strengths and pH values. The PPCs size and electrical properties were investigated, and the forces driving complexation were elucidated, in the light of computations of polyelectrolyte conformation, with a view to further unravel LbL construction mechanisms. Quartz crystal microbalance and atomic force microscopy were used to monitor the integration of PPCs compared to the one of bare protein molecules in LbL assemblies, and colorimetric assays were performed to determine the protein amount in the thin films. Layers built with PPCs show higher protein contents and hydration levels. Very importantly, the results also show that LbL construction with PPCs mainly relies on standard PE-PE interactions, independent of the charge state of the protein, in contrast to classical bare protein assembly with PEs. This considerably simplifies the incorporation of proteins in multilayers, which will be beneficial for biosensing, heterogeneous biocatalysis, biotechnologies, and medical applications that require active proteins at interfaces.

Poly(l-glutamic acid)-g-poly(ethylene glycol) external layer in polyelectrolyte multilayer films: Characterization and resistance to serum protein adsorption

Formation of protein-resistant surfaces is a major challenge in the design of novel biomaterials and an important strategy to prevent protein adsorption is the formation of protein-resistant coatings. It can be achieved by proper modification of surfaces, e.g., by immobilization of hydrophilic polymers such as poly(ethylene glycol) (PEG). An appropriate method to immobilize PEG at charged surfaces is the adsorption of copolymers with PEG chains grafted onto polyelectrolyte backbone. The growing interest in the use of polyelectrolyte multilayer coatings in biomedical applications to improve biocompatibility and/or to prepare coating with antiadhesive properties has been the main reason for these studies. Therefore the aim was to produce protein resistant polyelectrolyte multilayer films. They were formed via the layer-by-layer approach, while their pegylation by the deposition of pegylated polyanion, PGA-g-PEG, as an external layer. The influence of PEG chain length and grafting density of PGA-g-PEG copolymers on the protein antiadhesive properties of pegylated polyelectrolyte multilayer films was investigated. To monitor the formation of pegylated and non-pegylated multilayer films, adsorption of the following proteins: HSA, Fibrinogen, and FBS were measured by quartz crystal microbalance (QCM - D). We found that protein adsorption onto all pegylated polyelectrolyte multilayers was significantly reduced in comparison to non-pegylated ones. Long-term performance tests confirmed the stability and the durability of the protein resistant properties of the pegylated multilayers. Antiadhesive properties of tested surfaces pegylated by PGA-g-PEG were compared to the available data for pegylated polycation PLL-g-PEG.

Protein Interactions With Quaternized Chitosan/Heparin Multilayers

Understanding the behavior of single proteins at the polyelectrolyte multilayer film/solution interface is of prime importance for the designing of bio-functionalized surface coatings. In the present paper, we study the adsorption of the model proteins, albumin and lysozyme, as well as basic fibroblast growth factor (FGF-2) on a polysaccharide multilayer film composed of quaternized chitosan and heparin. Several analytical methods were used to describe the formation of the polysaccharide film and its interactions with the proteins. Both albumin and lysozyme adsorbed on quaternized chitosan/heparin films, however this process strongly depended on the terminating polysaccharide. Protein adsorption was driven mainly by electrostatic interactions between protein and the terminal layer of the film. The effective binding of FGF-2 by the heparin-terminated film suggested that other interactions could also contribute to the adsorption process. We believe that this FGF-2-presenting polysaccharide film may serve as a biofunctional surface coating for biologically-related applications.

Layer-by-Layer Assembly of Biopolyelectrolytes onto Thermo/pH-Responsive Micro/Nano-Gels

This review deals with the layer-by-layer (LbL) assembly of polyelectrolyte multilayers of biopolymers, polypeptides (i.e., poly-l-lysine/poly-l-glutamic acid) and polysaccharides (i.e., chitosan/dextran sulphate/sodium alginate), onto thermo- and/or pH-responsive micro- and nano-gels such as those based on synthetic poly(N-isopropylacrylamide) (PNIPAM) and poly(acrylic acid) (PAA) or biodegradable hyaluronic acid (HA) and dextran-hydroxyethyl methacrylate (DEX-HEMA). The synthesis of the ensembles and their characterization by way of various techniques is described. The morphology, hydrodynamic size, surface charge density, bilayer thickness, stability over time and mechanical properties of the systems are discussed. Further, the mechanisms of interaction between biopolymers and gels are analysed. Results demonstrate that the structure and properties of biocompatible multilayer films can be finely tuned by confinement onto stimuli-responsive gels, which thus provides new perspectives for biomedical applications, particularly in the controlled release of biomolecules, bio-sensors, gene delivery, tissue engineering and storage.

Stiff chains inhibit and flexible chains promote protein adsorption to polyelectrolyte multilayers

We tested the hypothesis that the level of protein adsorption onto polyelectrolyte multilayers (PEMs) is influenced by the chain stiffness of the polymers forming the multilayer. The implication being that by altering the chain stiffness, PEMs can be formed that promote or inhibit protein adsorption. Protein adsorption to PEMs consisting of flexible and semi-flexible polyelectrolytes was investigated. The flexible polyelectrolytes were poly(sodium 4-styrene sulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDDA) and the semi-flexible polyelectrolytes were sulfated chitosan (SC) and cationic guar gum (CGG). Polyelectrolytes were used in pairs to produce four types of polyelectrolyte multilayer films. Moreover, each of these films could be terminated with either of the polyelectrolytes resulting in protein adsorption being studied on 8 systems. Protein adsorption was investigated by optical reflectometry and quartz crystal microbalance with dissipation using bovine serum albumin as the test protein. We found that when a pair of semi-flexible polyelectrolytes was used very little protein adsorption took place, irrespective of which polyelectrolyte was used to terminate the film. When the film was formed by flexible polyelectrolytes, significant protein adsorption took place and the degree of adsorption depended strongly on which polyelectrolyte was used to terminate the film. We explain these observations by considering the conformation of the polyelectrolyte in the outermost region of the film and relate this to the flexibility of the polyelectrolyte chains employed to produce the polyelectrolyte multilayer.

Polypeptide multilayer self-assembly studied by ellipsometry

A polypeptide nanofilm made by layer-by-layer (LbL) self-assembly was built on a surface that mimics nonwoven, a material commonly used in wound dressings. Poly-L-lysine (PLL) and poly-L-glutamic acid (PLGA) are the building blocks of the nanofilm, which is intended as an enzymatically degradable lid for release of bactericides to chronic wounds. Chronic wounds often carry infection originating from bacteria such as Staphylococcus aureus and a release system triggered by the degree of infection is of interest. The dry nanofilm was studied with ellipsometry. The thickness of the nanofilm was 60% less in its dry state than in its wet state. The measurements showed that a primer was not necessary to build a stable nanofilm, which is practically important in our case because a nondegradable primer is highly unwanted in a wound care dressing. Added V8 (glutamyl endopeptidase) enzymes only showed adsorption on the nanofilm at room temperature, indicating that the PLL/PLGA “lid” may remain intact until the dressing has been filled with wound exudate at the elevated temperature typical of that of the wound.

Controlled release of an anti-cancer drug from DNA structured nano-films

We demonstrate the generation of systemically releasable anti-cancer drugs from multilayer nanofilms. Nanofilms designed to drug release profiles in programmable fashion are promising new and alternative way for drug delivery. For the nanofilm structure, we synthesized various unique 3-dimensional anti cancer drug incorporated DNA origami structures (hairpin, Y, and X shaped) and assembled with peptide via layer-by-layer (LbL) deposition method. The key to the successful application of these nanofilms requires a novel approach of the influence of DNA architecture for the drug release from functional nano-sized surface. Herein, we have taken first steps in building and controlling the drug incorporated DNA origami based multilayered nanostructure. Our finding highlights the novel and unique drug release character of LbL systems in serum condition taken full advantages of DNA origami structure. This multilayer thin film dramatically affects not only the release profiles but also the structure stability in protein rich serum condition.

In Situ Fibril Formation of κ-Casein by External Stimuli within Multilayer Thin Films

We have developed the in situ fibrillation of κ-casein, employed as amyloid precursor, within multilayer films consisting of κ-casein and poly(acrylic acid) (PAA) prepared by the layer-by-layer (LbL) deposition. The fibrillation of κ-casein within the multilayered films is strongly dependent on the extent of intermolecular interactions between κ-casein and PAA. When films constructed initially at pH 3 were heat treated at the same pH, κ-casein did not transform into fibrils. However, when the films were subjected to heat treatment at pH 5, κ-casein was transformed into fibrils within multilayer films due to weakened intermolecular interactions between κ-casein and PAA. We also noted that the multilayer film was swollen at pH 5 by the charge imbalance within the film, which we believe gives enough mobility for κ-caseins to form fibrils with adjacent κ-caseins within the multilayer. The fibrils were found to be uniformly distributed across the entire film thickness, and the aspect ratio as well as the number density of fibrils increased as a function of incubation time. The present study reveals a strategy to realize in situ nanocomposites within LbL multilayer films simply by triggering the formation of protein fibrils by controlling the intermolecular interactions between amyloid precursors and polyelectrolytes (PEs).

Layer-by-layer film growth using polysaccharides and recombinant polypeptides: a combinatorial approach

Nanostructured films consisting of polysaccharides and elastin-like recombinamers (ELRs) are fabricated in a layer-by-layer manner. A quartz-crystal microbalance with dissipation monitoring (QCM-D) is used to follow the buildup of hybrid films containing one polysaccharide (chitosan or alginate) and one of several ELRs that differ in terms of amino acid content, length, and biofunctionality in situ at pH 4.0 and pH 5.5. The charge density of the ingredients at each pH is determined by measuring their ζ-potential, and the thickness of a total of 36 different films containing five bilayers is estimated using the Voigt-based viscoelastic model. A comparison of the values obtained reveals that thicker films can be obtained when working at a pH close to the acidity constant of the polysaccharide used (near-pKa conditions), suggesting that the construction of such films is more favorable when based on the presence of hydrophobic interactions between ELRs and partially neutralized polysaccharides. Further analysis shows that the molecular weight of the ELRs plays only a minor role in defining the growth tendency. When taken together, these results point to the most favorable conditions for constructing nanostructured films from natural and distinct recombinant polypeptides that can be tuned to exhibit specialized biofunctionality for tissue-engineering, drug-delivery, and biotechnological applications.

Increased protein sorption in poly(acrylic acid)-containing films through incorporation of comb-like polymers and film adsorption at low pH and high ionic strength

In principle, incorporation of comb-like block copolymers in multilayer polyelectrolyte films can both increase film thickness relative to coatings containing linear polymers and provide more swollen films for increased sorption of proteins. In the absence of added salt, alternating adsorption of 5 bilayers of protonated poly(allylamine) (PAH) and comb-like poly(2-hydroxyethyl methacrylate)-graft-poly(acrylic acid) (PHEMA-g-PAA) leads to ∼2-fold thicker coatings than adsorption of PAH and linear PAA, and the difference in the thicknesses of the two coatings increases with the number of bilayers. Moreover, the (PAH/PHEMA-g-PAA)n films sorb 2- to 4-fold more protein than corresponding films prepared with linear PAA, and coatings deposited at pH 3.0 sorb more protein than coatings adsorbed at pH 5.0, 7.0, or 9.0. In fact changes in deposition pH and addition of 0.5 M NaCl to polyelectrolyte adsorption solutions alter protein sorption more dramatically than variations in the constituent polymer architecture. When deposited from 0.5 M NaCl at pH 3.0, both (PAH/PHEMA-g-PAA)5 and (PAH/PAA)5 films increase in thickness more than 400% upon adsorption of lysozyme. These films contain a high concentration of free -COOH groups, and subsequent deprotonation of these groups at neutral pH likely contributes to increased protein binding. Lysozyme sorption stabilizes these films, as without lysozyme films deposited at pH 3.0 from 0.5 M NaCl desorb at neutral pH. Films deposited at pH 9.0 from 0.5 M NaCl are more stable and also bind large amounts of lysozyme. The high binding capacities of these films make them attractive for potential applications in protein isolation or immobilization of enzymes.

Polyelectrolyte Multilayer Assemblies on Materials Surfaces: From Cell Adhesion to Tissue Engineering

Controlling the bulk and surface properties of materials is a real challenge for bioengineers working in the fields of biomaterials, tissue engineering and biophysics. The layer-by-layer (LbL) deposition method, introduced 20 years ago, consists in the alternate adsorption of polyelectrolytes that self-organize on the material's surface, leading to the formation of polyelectrolyte multilayer (PEM) films.1 Because of its simplicity and versatility, the procedure has led to considerable developments of biological applications within the past 5 years. In this review, we focus our attention on the design of PEM films as surface coatings for applications in the field of physical properties that have emerged as being key points in relation to biological processes. The numerous possibilities for adjusting the chemical, physical, and mechanical properties of PEM films have fostered studies on the influence of these parameters on cellular behaviors. Importantly, PEM have emerged as a powerful tool for the immobilization of biomolecules with preserved bioactivity.

Introduction to nanocoatings produced by layer-by-layer (LbL) self-assembly

Studies on the adsorption of oppositely charged colloidal particles ultimately resulted in multilayered polyelectrolyte self-assembly. The inception of layer-by-layer constructed particles facilitated the production of multifunctional, stimuli-responsive carrier systems. An array of synthetic and natural polyelectrolytes, metal oxides and clay nanoparticles is available for the construction of multilayered nanocoats on a multitude of substrates or removable cores. Numerous substrates can be encapsulated utilizing this technique including dyes, enzymes, drugs and cells. Furthermore, the outer surface of the particles presents and ideal platform that can be functionalized with targeting molecules or catalysts. Some processing parameters determining the properties of these successive self-assembly constructs are the surface charge density, coating material concentration, rinsing and drying steps, temperature and ionic strength of the medium. Additionally, the simplicity of the layer-by-layer assembly technique and the availability of established characterization methods, render these constructs extremely versatile in applications of sensing, encapsulation and target- and trigger-responsive drug delivery.

Dynamic aspects of films prepared by a sequential deposition of species: perspectives for smart and responsive materials

The deposition of surface coatings using a step-by-step approach from mutually interacting species allows the fabrication of so called "multilayered films". These coatings are very versatile and easy to produce in environmentally friendly conditions, mostly from aqueous solution. They find more and more applications in many hot topic areas, such as in biomaterials and nanoelectronics but also in stimuli-responsive films. We aim to review the most recent developments in such stimuli-responsive coatings based on layer-by-layer (LBL) depositions in relationship to the properties of these coatings. The most investigated stimuli are based on changes in ionic strength, temperature, exposure to light, and mechanical forces. The possibility to induce a transition from linear to exponential growth in thickness and to change the charge compensation from "intrinsic" to "extrinsic" by controlling parameters such as temperature, pH, and ionic strength are the ways to confer their responsiveness to the films. Chemical post-modifications also allow to significantly modify the film properties.

pH-reversible, high-capacity binding of proteins on a substrate with nanostructure

In this letter, a pH-switchable system for protein adsorption and release is introduced. By combining the pH sensitivity of poly(methacrylic acid) (poly(MAA) chains and the nanoeffects of 3D nanostructured silicon nanowire arrays (SiNWAs), a poly(MAA)-modified SiNWAs material showed an extremely high capacity for binding lysozyme at pH 4 (an ∼80-fold increase compared with that of smooth Si-poly(MAA)). Moreover, ∼90% of the adsorbed lysozyme was released from SiNWAs-poly(MAA) by increasing the pH from 4 to 9, without a loss of enzyme activity.

Crosslink effect and albumin adsorption onto chitosan/alginate multilayered systems: an in situ QCM-D study

The adsorption of HSA onto CHI/ALG multilayer assemblies was assessed in situ using QCM-D. It was found that the behavior of HSA on biomaterials surface can be tuned by adjusting parameters of the polyelectrolyte system such as pH, layer number, crosslinker and polymer terminal layer. Our results confirmed the key role of electrostatic interactions during HSA adsorption, since oppositely charged surfaces were more effective in promoting protein adhesion. QCM-D data revealed that crosslinking (CHI/ALG)(5) CHI films allows HSA to become adsorbed in physiological conditions. Our results suggested that the biological potential of biopolymers and the mild conditions of the LbL technique turn these natural nanoassemblies into a suitable choice to be used as pH-sensitive coatings.

Protein adsorption onto polyelectrolyte layers: effects of protein hydrophobicity and charge anisotropy

Ellipsometry was used to investigate the influence of ionic strength (I) and pH on the adsorption of bovine serum albumin (BSA) or beta-lactoglobulin (BLG) onto preabsorbed layers of two polycations: poly(diallyldimethylammonium chloride) (PDADMAC) or poly(4-vinylpyridine bromide) quaternized with linear aliphatic chains of two (QPVP-C2) or five (QPVP-C5) carbons. Comparisons among results for the three polycations reveal hydrophobic interactions, while comparisons between BSA and BLG-proteins of very similar isoelectric points (pI)-indicate the importance of protein charge anisotropy. At pH close to pI, the ionic strength dependence of the adsorbed amount of protein (Gamma) displayed maxima in the range 10 < I < 25 mM corresponding to Debye lengths close to the protein radii. Visualization of protein charge by Delphi suggested that these ionic strength conditions corresponded to suppression of long-range repulsion between polycations and protein positive domains, without diminution of short-range attraction between polycation segments and locally negative protein domains, in a manner similar to the behavior of PE-protein complexes in solution. (1-4) This description was consistent with the disappearance of the maxima at pH either above or below pI. In the former case, Gamma values decrease exponentially with I(1/2), due to screening of attractions, while in the latter case adsorption of both proteins decreased at low I due to strong repulsion. Close to or below pI both proteins adsorbed more strongly onto QPVP-C5 than onto QPVP-C2 or PDADMAC due to hydrophobic interactions with the longer alkyl group. Above pI, the adsorption was more pronounced with PDADMAC because these chains may assume more loosely bound layers due to lower linear charge density.

Polyelectrolyte multilayers-modified polystyrene plate improves conventional immunoassay: full covering of the blocking reagent

In this study, we fabricated polyelectrolyte multilayers (PEMs) on a polystyrene (PS) plate by a simple and novel alternate drop coating process (Acta Biomaterialia 2008, 4, 1255-1262), leading to the construction of a functional platform for improving conventional enzyme-linked immunosorbent assay (ELISA) systems. Poly(diallyldimethylammonium chloride) (PDDA) and poly(sodium 4-styrenesulfonate) (PSS) were used as cationic and anionic polyelectrolytes, and then positively or negatively charged surfaces were obtained on the PEMs. The PDDA/PSS PEMs on the PS plate had the following favorable characteristics. On the positive PEMs, the coverage of the blocking reagent (ovalbumin from egg white: OVA) was over 100% by electrostatic interaction between the protein and PEMs, hence, nonspecific adsorption from the secondary antibody was efficiently suppressed. Moreover, the positive PEMs showed higher sensitivity on the ELISA than the negative PEMs, including the PS plate. Regularly oscillating behavior for sensitivity (specific signal-to-noise ratio) was observed on 1-10-step assemblies. The calibration curves for antigen detection on the positive PEMs had wide range of concentration from 0.002 to 5 microg/mL, and largest change in signal as compared with the negative PEMs and the PS plate. In summary, we discovered that positive PEMs possessed excellent performance for ELISA systems, and PEMs could easily improve the immunoassay with a convenient process and diverse substrates.

Multilayer buildup and biofouling characteristics of PSS-b-PEG containing films

Thin films exhibiting protein resistance are of interest in diverse areas, ranging from low fouling surfaces in biomedicine to marine applications. Herein, we report the preparation of low protein and cell binding multilayer thin films, formed by the alternate deposition of a block copolymer comprising polystyrene sulfonate and poly(poly(ethylene glycol) methyl ether acrylate) (PSS-b-PEG), and polyallylamine hydrochloride (PAH). Film buildup was followed by quartz crystal microgravimetry (QCM), which showed linear growth and a high degree of hydration of the PSS-b-PEG/PAH films. Protein adsorption studies with bovine serum albumin using QCM demonstrated that multilayer films of PSS/PAH with a terminal layer of PSS-b-PEG were up to 5-fold more protein resistant than PSS-terminated films. Protein binding was dependent on the ionic strength at which the terminal layer of PSS-b-PEG was adsorbed, as well as the pH of the protein solution. It was also possible to control the protein resistance of the films by coadsorption of the final layer with another component (PSS), which showed an increase in protein resistance as the proportion of PSS-b-PEG in the adsorption solution was increased. In addition, protein resistance could also be controlled by the location of a single PSS-b-PEG layer within a PSS/PAH film. Finally, the buildup of PSS-b-PEG/PAH films on colloidal particles was demonstrated. PSS-b-PEG-terminated particles exhibited a 6.5-fold enhancement in cell binding resistance compared with PSS-terminated particles. The stability of PSS-b-PEG films combined with their low protein and cell binding characteristics provide opportunities for the use of the films as low fouling coatings in devices and other surfaces requiring limited interaction with biological interfaces.

Effect of surface morphology and charge on the amount and conformation of fibrinogen adsorbed onto alginate/chitosan microcapsules

We report the influence of surface morphology and charge of alginate/chitosan (ACA) microcapsules on both the amount of adsorbed protein and its secondary structural changes during adsorption. Variations in surface morphology and charge were controlled by varying alginate molecular weight and chitosan concentration. Plasma fibrinogen (Fgn) was chosen to model this adsorption to foreign surfaces. The surface of ACA microcapsules exhibited a granular structure after incubating calcium alginate beads with chitosan solution to form membranes. The surface roughness of ACA microcapsule membranes decreased with decreasing alginate molecular weight and chitosan concentration. Zeta potential measurements showed that there was a net negative charge on the surface of ACA microcapsules which decreased with decreasing alginate molecular weight and chitosan concentration. The increase in both surface roughness and zeta potential resulted in an increase in the amount of Fgn adsorbed. Moreover, the higher the zeta potential was, the stronger the protein-surface interaction between fibrinogen and ACA microcapsules was. More protein molecules adsorbed spread and had a greater conformational change on rougher surfaces for more surfaces being available for protein to attach.

Dual-function nanofilm coatings with diffusion control and protein resistance

To date, limited examples of polyelectrolyte multilayers (PEMs) can be found that truly exploit the power of layer-by-layer nanoassembly to combine multiple functions into a complex multilayer. We demonstrate that PEMs can be designed as optimized coatings for implantable biosensors, exhibiting both diffusion control and protein resistance. PEM coatings comprising strong-weak and weak-weak pairs were evaluated, resulting in decreases in glucose diffusivity up to 5 orders of magnitude compared to water. Addition of poly(ethylene glycol) (PEG)-grafted terminal layers on the base diffusion-controlling multilayers substantially improved resistance to albumin adsorption relative to unmodified PEMs. For transport-controlling films comprising strong-weak polyelectrolyte pairs, the consistent diffusivity was observed even after exposure to protein-containing solutions, indicating minimal effects of biofouling. In contrast, the transport behavior of weak-weak polyelectrolyte pairs was susceptible to alteration by protein exposure, resulting in large variation in diffusivity, even when protein-resistant outer layers were employed.

Multiple functionalities of polyelectrolyte multilayer films: new biomedical applications

The design of advanced functional materials with nanometer- and micrometer-scale control over their properties is of considerable interest for both fundamental and applied studies because of the many potential applications for these materials in the fields of biomedical materials, tissue engineering, and regenerative medicine. The layer-by-layer deposition technique introduced in the early 1990s by Decher, Moehwald, and Lvov is a versatile technique, which has attracted an increasing number of researchers in recent years due to its wide range of advantages for biomedical applications: ease of preparation under "mild" conditions compatible with physiological media, capability of incorporating bioactive molecules, extra-cellular matrix components and biopolymers in the films, tunable mechanical properties, and spatio-temporal control over film organization. The last few years have seen a significant increase in reports exploring the possibilities offered by diffusing molecules into films to control their internal structures or design "reservoirs," as well as control their mechanical properties. Such properties, associated with the chemical properties of films, are particularly important for designing biomedical devices that contain bioactive molecules. In this review, we highlight recent work on designing and controlling film properties at the nanometer and micrometer scales with a view to developing new biomaterial coatings, tissue engineered constructs that could mimic in vivo cellular microenvironments, and stem cell "niches."

Cross-Linked Multilayers of Poly(vinyl amine) as a Single Component and Their Interaction with Proteins

Novel multilayer thin films that consist solely of cross-linked single component layers are generated by a selective cross-linking of the poly(vinyl amine) (PVAm) layers in [PVAm/poly(acrylic acid) (PAA)](n) thin films constructed either on silica particles or silicon wafers, followed by the removal of PAA. The surface topography of the (PVAm)(n) multilayer thin films, before and after the adsorption of human serum albumin (HSA), has been studied by atomic force microscopy on the freeze-dried films. The decrease of the average roughness of the film after the adsorption of HSA showed the protein was adsorbed into the (PVAm)(n) film making these films potential reservoirs for proteins.

Assembly of purple membranes on polyelectrolyte films

The membrane protein bacteriorhodopsin in its native membrane bound form (purple membrane) was adsorbed and incorporated into polyelectrolyte multilayered films, and adsorption was in situ monitored by optical waveguide light-mode spectroscopy. The formation of a single layer or a double layer of purple membranes was observed when adsorbed on negatively or positively charged surfaces, respectively. The purple membrane patches adsorbed on the polyelectrolyte multilayers were also evidenced by atomic force microscopy images. The driving forces of the adsorption process were evaluated by varying the ionic strength of the solution as well as the purple membrane concentration. At high purple membrane concentration, interpenetrating polyelectrolyte loops might provide new binding sites for the adsorption of a second layer of purple membranes, whereas at lower concentrations only a single layer is formed. Negative surfaces do not promote a second protein layer adsorption. Driving forces other than just electrostatic ones, such as hydrophobic forces, should play a role in the polyelectrolyte/purple membrane layering. The subtle interplay of all these factors determines the formation of the polyelectrolyte/purple membrane matrix with a presumably high degree of orientation for the incorporated purple membranes, with their cytoplasmic, or extracellular side toward the bulk on negatively or positively charged polyelectrolyte, respectively. The structural stability of bacteriorhodopsin during adsorption onto the surface and incorporation into the polyelectrolyte multilayers was investigated by Fourier transform infrared spectroscopy in attenuated total reflection mode. Adsorption and incorporation of purple membranes within polyelectrolyte multilayers does not disturb the conformational majority of membrane-embedded alpha-helix structures of the protein, but may slightly alter the structure of the extramembraneous segments or their interaction with the environment. This high stability is different from the lower stability of the predominantly beta-sheet structures of numerous globular proteins when adsorbed onto surfaces.

Photopatterned nanoporosity in polyelectrolyte multilayer films

We report on spatial control of nanoporosity in polyelectrolyte multilayer (PEM) films using photopatterning and its effects on film optical and adsorption properties. Multilayers assembled from poly(acrylic acid-ran-vinylbenzyl acrylate) (PAArVBA), a photo-cross-linking polymer, and poly(allylamine hydrochloric acid) (PAH) were patterned using ultraviolet light followed by immersion in low pH and then neutral pH solutions to induce nanoporosity in unexposed regions. Model charged small molecules rhodamine B, fluorescein, and propidium iodide and the model protein albumin exhibit increased adsorption to nanoporous regions of patterned PEM films as shown by fluorescence microscopy and radiolabeling experiments. Films assembled with alternating stacks of PAH/poly(sodium-4-styrene sulfonate) (SPS), which do not become nanoporous, and stacks of PAH/PAArVBA were patterned to create nanoporous capillary channels. Interdigitated channels demonstrated simultaneous, separate wicking of dimethyl sulfoxide-solvated fluorescein and rhodamine B. In addition, these heterostack structures exhibited patternable Bragg reflectivity of greater than 25% due to refractive index differences between the nanoporous and nonporous stacks. Finally, the PEM assembly process coupled with photo-cross-linking was used to create films with two separate stacked reflective patterns with a doubling in reflectivity where patterns overlapped. The combined adsorptive and reflective properties of these films hold promise for applications in diagnostic arrays and therapeutics delivery.

Response of fibroblast activity and polyelectrolyte multilayer films coating titanium

OBJECTIVES

The study of surface properties is a recent and crucial issue in the biomaterial fields applied to Odontology. The reference biomaterial in dental implantology is titanium. The principal objective is a perfect bio-integration in the oral ecosystem, both in terms of mucosal and bone tissues. The aim of this work was to optimize the tissue-titanium interface by applying polyelectrolyte multilayer films on the surface of titanium.

METHODS

The experimental study was undertaken on pure titanium samples. Two types of film ending with polycations or polyanions were selected. Both film types were built with a first poly(ethyleneimine) (PEI) base layer and composed either of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) or of hyaluronic acid (HA) and poly(l-lysine) (PLL) layers. Final architectures were as follows: PEI-(PSS/PAH)(10), or PEI-(PSS/PAH)(10)-PSS, or chemically cross-linked PEI-(HA/PLL)(10) or PEI-(HA/PLL)(10)-HA. An analysis of the physicochemical characteristics of the surfaces was carried out by tensiometry measurements (dynamic contact angle, wettability, contact angle hysteresis) and atomic force microscopy. A biological study with human fibroblasts was followed over a 7-day culture period at days 0, 2, 4 and 7 to observe the cellular response in terms of morphology (scanning electron microscopy) and viability (Mosmann's test).

RESULTS

The results showed that polyelectrolyte multilayer films could be successfully deposited onto titanium as previously described for glass or composite. Fibroblast adhesion and proliferation was strongly dependent on film type. SEM observations of cells on the different films agreed with the viability cell test. Furthermore, films containing PSS/PAH generated a better cellular response than films containing cross-linked HA/PLL.

CONCLUSION

PSS/PAH polyelectrolyte films coating titanium could represent a new approach for oral bio-integration with great potential for clinical application in the fields of dental implantology. More particularly, the specific biofunctionalization of PSS/PAH films coating titanium could be envisioned by introducing layers of molecules that encourage the bio-integration process between the films.