Small-angle neutron scattering from mixtures of sodium dodecyl sulfate and a cationic, bolaform surfactant containing azobenzene

Light and pH responsive catanionic vesicles based on a chalcone/flavylium photoswitch for smart drug delivery: From molecular design to the controlled release of doxorubicin

Spatially and temporally localized delivery is a promising strategy to circumvent adverse effects of traditional drug therapy such as drug toxicity and prolonged treatments. Stimuli-responsive colloidal nanocarriers can be crucial to attain such goals. Here, we develop a delivery system based on dual light and pH responsive vesicles having a cationic bis-quat gemini surfactant, 12-2-12, and a negatively charged amphiphilic chalcone, C4SCh. The premise is to exploit the chalcone/flavylium interconversion to elicit a morphological change of the vesicles leading to the controlled release of an encapsulated drug. First, the phase behavior of the catanionic system is studied and the desirable composition yielding stable unilamellar vesicles identified and selected for further studies. The solutions containing vesicles (Dh ≈ 200 nm, ζ-potential ≈ 80 mV) are in-depth characterized by light microscopy, cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS) and surface tension measurements. Upon subjecting the vesicles to UV irradiation (λ = 365 nm) at near neutral pH (≈ 6.0), no morphological effects are observed, yet when irradiation is coupled with pH = 3.0, the majority of the vesicles are disrupted into bilayer fragments. The anticancer drug doxorubicin (DOX) is successfully entrapped in the non-irradiated vesicles, yielding an encapsulation efficiency of ≈ 25% and a loading capacity of ≈ 3%. The release profile of the drug-loaded vesicles is then studied in vitro in four conditions: i) no stimuli (pH = 6.0); ii) irradiation, pH = 6.0; iii) no irradiation and adjusted pH = 3.0; iv) irradiation and adjusted pH = 3.0 Crucially, irradiation at pH = 3.0 leads to a sustained release of DOX to ca. 80% (within 4 h), whereas cases i) and ii) lead to only ≈ 25 % release and case iii) to 50% release but precipitation of the vesicles. Thus, our initial hypothesis is confirmed: we present a proof of concept delivery system where light and pH act as inputs of an AND logic gate mechanism for the controlled release of a relevant biomedical drug (output). This may prove useful if the irradiated nanocarriers meet acidified physiological environments such as tumors sites, endosomes or lysosomes.

Inner and Interfacial Environmental Nanoarchitectonics of Supramolecular Assemblies Formed by Amphiphiles: from Emergence to Application

The inner and interfacial environments of self-assemblies provide fascinating nano-space for selective and efficient chemical reactions and processes. In biological systems, various chemical reactions, molecular recognition, and transport occur precisely and selectively by virtue of effective molecular interactions on biological membranes and proteins. Considering these advantages and the concept of nanoarchitectonics, we demonstrated that the photochromism of a lophine dimer was accelerated by using confined nano-spaces formed by surfactant micelles. The photoresponsive micelles were used for the rapid controlled release of a model drug upon ultraviolet light irradiation. Furthermore, selective ion recognition inside the self-assembled molecular films at the interfaces was investigated. The anion-π interaction between the anion and an electron-deficient aromatic ring was evaluated on a solid substrate modified with a naphthalenediimide (NDI) analog. Force curve measurements afforded a quantitative analysis of anion-π interactions on the NDI film. The strength of anion-π interactions is regulated by the electric fields on the electrode. An optical probe was developed to visualize the distribution of Cs ions in the soil, plant bodies, and aqueous media using an optode system. Advances in the development of molecular functional systems are expected based not only on molecular structures but also on the spaces and environments produced by them.

Structure-Performance Relationships for Tail Substituted Zwitterionic Betaine-Azobenzene Surfactants

Azobenzene-containing surfactants (azo-surfactants) have garnered significant attention for their use in generating photoresponsive foams, interfaces, and colloidal systems. The photoresponsive behavior of azo-surfactants is driven by the conformational and electronic changes that occur when the azobenzene chromophore undergoes light-induced trans ⇌ cis isomerization. Effective design of surfactants and targeting of their properties requires a robust understanding of how the azobenzene functionality interacts with surfactant structure and influences overall surfactant behavior. Herein, a library of tail substituted azo-surfactants were synthesized and studied to better understand how surfactant structure can be tailored to exploit the azobenzene photoswitch. This work shows that tail group structure (length and branching) has a profound influence on the critical micelle concentration of azo-surfactants and their properties once adsorbed to an air-water interface. Neutron scattering studies revealed the unique role that intermolecular π-π azobenzene interactions have on the self-assembly of azo-surfactants, and how the influence of these interactions can be tuned using tail group structure to target specific aqueous aggregate morphologies.

Structural transition of reverse cylindrical micelles to reverse vesicles by mixtures of lecithin and inorganic salts

HYPOTHESIS

The transformation from reverse micelles to reverse vesicles is influenced by electrostatic interactions between lecithin headgroups and inorganic salts. The electrostatic interactions are expected to influence molecular geometry of lecithin, resulting in a reduction in critical packing parameter (p). Hence, it should be possible to drive structural transitions of reverse self-assembled structures by addition of inorganic salts to lecithin solutions.

EXPERIMENTS

Structural transitions of reverse micelles and reverse vesicles were formulated including lecithin and inorganic salts as a function of concentration in cyclohexane. A systematic study was performed using inorganic salts with the different valences of the cations such as Li⁺, Ca²⁺, and La³⁺. To probe the nanodomain structures from the lecithin/salt mixtures, small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) were used.

FINDINGS

Adding salts to lecithin solutions induced the systematic transformation of reverse self-assembled structures from reverse spherical micelles to reverse cylindrical micelles and finally to reverse vesicles. The transformation was also correlated with interactions between lecithin headgroups and salts, that is, Li⁺ < Ca²⁺ < La³⁺. In addition, a water-soluble dye such as rhodamine B (RB) can be readily encapsulated into reverse micelles and vesicles, indicating that they are potentially useful for controlled solute delivery.

Rapid controlled release by photo-irradiation using morphological changes in micelles formed by amphiphilic lophine dimers

Photo-induced rapid control of molecular assemblies, such as micelles and vesicles, enables effective and on-demand release of drugs or active components, with applications such as drug delivery systems (DDS) and cosmetics. Thus far, no attempts to optimize the responsiveness of photoresponsive molecular assemblies have been published. We previously reported photoresponsive surfactants bearing a lophine dimer moiety that exhibit fast photochromism in confined spaces, such as inside a molecular assembly. However, rapid control of the micelle structures and solubilization capacity have not yet been demonstrated. In the present work, photo-induced morphological changes in micelles were monitored using in-situ small-angle neutron scattering (SANS) and UV/Vis absorption spectroscopy. An amphiphilic lophine dimer (3TEG-LPD) formed elliptical micelles. These were rapidly elongated by ultraviolet light irradiation, which could be reversed by dark treatment, both within 60 s. For a solution of 3TEG-LPD micelles solubilizing calcein as a model drug molecule, fluorescence and SANS measurements indicated rapid release of the incorporated calcein into the bulk solvent under UV irradiation. Building on these results, we investigated rapid controlled release via hierarchical chemical processes: photoisomerization, morphological changes in the micelles, and drug release. This rapid controlled release system allows for effective and on-demand DDS.

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

Catanionic Surfactant Self-Assembly in Protic Ionic Liquids

Mixing of cationic and anionic surfactants in water can result in pseudo-double-tailed catanionic surfactant ion pairs that form lamellar phases or vesicles that are unstable toward electrolyte addition. Here we show that despite the very high ionic strengths, catanionic surfactants counterintuitively form a wider variety of self-assembled aggregates in pure ionic liquids (ILs, pure salts in a liquid phase) than in water, including micelles, vesicles, and lyotropic phases. Self-assembled structures only form when the IL is sufficiently polar to drive self-assembly through electrostatic interactions and/or H-bond networks, but the catanionic effect is manifested only when the IL does not itself exhibit pronounced amphiphilic nanostructure. This enables the type of catanionic aggregate formed to be designed by changing the hydrogen bonds between the ions through variation of the structures of the cation and anion. These results reveal an entirely new way of controlling catanionic surfactant self-assembly under nonaqueous and high-salt conditions.

Mechanism for Transition of Reverse Cylindrical Micelles to Spherical Micelles Induced by Diverse Alcohols

Herein, the effects of various alcohols on lecithin/CaCl₂ organogels are investigated. Mixtures of lecithin and CaCl₂ form reverse cylindrical micelles, resulting in optically transparent organogels. The addition of various alcohols to a mixture of lecithin and CaCl₂ induces a decrease in viscosity through which reverse cylindrical micelles are transformed into spherical micelles (or short cylindrical micelles). Long-hydrocarbon-chain alcohols decrease the viscosity of lecithin/CaCl₂ mixtures more efficiently. Hydrogen bonding and hydrocarbon chain interactions between lecithin and alcohol play important roles in the morphological transition. More importantly, isothermal titration calorimetry was conducted to obtain thermodynamic variables such as the enthalpy, equilibrium constant, Gibbs free energy, entropy, and stoichiometry of the associated molecules observed in the transition. It was found that the transition is an entropically driven process, in which the endothermic and exothermic behaviors were observed depending on the hydrocarbon chain length in the alcohol. In addition, the enthalpy for the association of the alcohol with lecithin showed a linear relationship depending on the hydrocarbon chain length, in which the magnitude of hydrogen bonding and hydrocarbon chain interactions was obtained quantitatively. To the best of our knowledge, this is the first study reporting the thermodynamic properties of the morphological transition observed in a reverse self-assembly process.

Membrane Environment Enables Ultrafast Isomerization of Amphiphilic Azobenzene

The non-covalent affinity of photoresponsive molecules to biotargets represents an attractive tool for achieving effective cell photo-stimulation. Here, an amphiphilic azobenzene that preferentially dwells within the plasma membrane is studied. In particular, its isomerization dynamics in different media is investigated. It is found that in molecular aggregates formed in water, the isomerization reaction is hindered, while radiative deactivation is favored. However, once protected by a lipid shell, the photochromic molecule reacquires its ultrafast photoisomerization capacity. This behavior is explained considering collective excited states that may form in aggregates, locking the conformational dynamics and redistributing the oscillator strength. By applying the pump probe technique in different media, an isomerization time in the order of 10 ps is identified and the deactivation in the aggregate in water is also characterized. Finally, it is demonstrated that the reversible modulation of membrane potential of HEK293 cells via illumination with visible light can be indeed related to the recovered trans→cis photoreaction in lipid membrane. These data fully account for the recently reported experiments in neurons, showing that the amphiphilic azobenzenes, once partitioned in the cell membrane, are effective light actuators for the modification of the electrical state of the membrane.

Accelerated recombination of lophyl radicals and control of the surface tension with amphiphilic lophine dimers

We report the accelerated photoisomerization of amphiphilic lophine dimers based on the inner environments of molecular assemblies and rapid control of the interfacial properties of aqueous solution with photoirradiation. This novel photoisomerization system enables on-demand controlled release of drugs, perfumes, and other active compounds.

Photoinduced viscosity control of lecithin-based reverse wormlike micellar systems using azobenzene derivatives

This report describes the controlled viscosity changes of photoresponsive reverse wormlike micellar systems formed by soybean lecithin (SoyPC), d-ribose, and azobenzene derivatives in decane.

A Light-Responsive Self-Assembly Formed by a Cationic Azobenzene Derivative and SDS as a Drug Delivery System

The structure of a self-assembly formed from a cationic azobenzene derivative, 4-cholesterocarbonyl-4'-(N,N,N-triethylamine butyloxyl bromide) azobenzene (CAB) and surfactant sodium dodecyl sulfate (SDS) in aqueous solution was studied by cryo-TEM and synchrotron radiation small-angle X-ray scattering (SAXS). Both unilamellar and multilamellar vesicles could be observed. CAB in vesicles were capable to undergo reversible trans-to-cis isomerization upon UV or visible light irradiation. The structural change upon UV light irradiation could be catched by SAXS, which demonstrated that the interlamellar spacing of the cis-multilamellar vesicles increased by 0.2-0.3 nm. Based on this microstructural change, the release of rhodamine B (RhB) and doxorubicin (DOX) could be triggered by UV irradiation. When incubated NIH 3T3 cells and Bel 7402 cells with DOX-loaded CAB/SDS vesicles, UV irradiation induced DOX release decreased the viability of both cell lines significantly compared with the non-irradiated cells. The in vitro experiment indicated that CAB/SDS vesicles had high efficiency to deliver loaded molecules into cells. The in vivo experiment showed that CAB/SDS vesicles not only have high drug delivery efficiency into rat retinas, but also could maintain high drug concentration for a longer time. CAB/SDS catanionic vesicles may find potential applications as a smart drug delivery system for controlled release by light.

One platform solid multicolour emission of terthiophene compounds controlled by mixed self-assembly

Via the mixed self-assembling procedure, solid multicolour emission materials based on an amphiphilic terthiophene compound are obtained from a unimolecular platform. Upon controlling the concentration of the cationic surfactant dodecyltriethyl ammonium bromide (DEAB) in the precipitate-monomer equilibrium system of the terthiophene compound TTC4L, mixed self-assembly of TTC4L-DEAB results in diverse structures (including plates, spheres, and needles) with different emission colours. The multicolour emissions are triggered by the different distances between the terthiophene groups in these mixed self-assemblies. Each distance corresponds to a specific molecular state of terthiophene groups, so that emissions corresponding to the monomers, excimers, and aggregates are obtained. Upon variation of the ratio of DEAB and TTC4L, the relative fraction of emissions corresponding to the monomers, excimers, and aggregates of TTC4L changes. This approach may act as a simple method to control the stacking mode of the oligothiophene group which is anticipated to realize unimolecular-platform multicolour emissions.

Light-induced structural evolution of photoswitchable carbohydrate-based surfactant micelles

We report the light-induced structural evolution of photoswitchable carbohydrate-based surfactant micelles using time-resolved small-angle neutron scattering (TR-SANS), monitoring the structural changes in micellisation in situ over time and demonstrating for the first time the course and implications of this process.

Investigation on the aggregation behavior of photo-responsive system composed of 1-hexadecyl-3-methylimidazolium bromide and 2-methoxycinnamic acid

Mechanism of the aggregation behavior for the photo-responsive system composed of 1-hexadecyl-3-methylimidazolium bromide and 2-methoxycinnamic acid.

Spontaneous unilamellar polymer vesicles in aqueous solution

A unilamellar polymeric vesicle is a self-assembled structure of a block copolymer that forms a spherical single bilayer structure with a hydrophobic interlayer and a hydrophilic surface. Due to their enhanced colloidal stability and mechanical property, controllable surface functionality, or tunable membrane thickness, polymeric vesicles are useful in nano and bio-science, providing potential applications as nanosized carriers for catalysts, drugs, and enzymes. For fabrication of a unilamellar vesicle, however, preparative procedures with a few steps are inherently required. Herein, without complicated preparative procedures, we report spontaneous unilamellar polymeric vesicles with nanometer sizes (<100 nm), which are prepared by simply mixing a triblock copolymer, Pluronic P85 (PEO26PPO40PEO26), and an organic derivative, 5-methyl salicylic acid (5mS), in aqueous solution. Depending on the 5mS concentration and the temperature, the P85-5mS mixtures presented various self-assembled nanostructures such as spherical and cylindrical micelles or vesicles, which were characterized by small angle neutron scattering and cryo-TEM, resulting in a phase diagram drawn as a function of temperature and the 5mS concentration. Interestingly the critical temperature for the micelle-to-vesicle phase transition was easily controlled by varying the 5mS concentration, i.e. it was decreased with increasing the 5mS concentration.

UV-induced bursting of cell-sized multicomponent lipid vesicles in a photosensitive surfactant solution

We study the behavior of multicomponent giant unilamellar vesicles (GUVs) in the presence of AzoTAB, a photosensitive surfactant. GUVs are made of an equimolar ratio of dioleoylphosphatidylcholine (DOPC) and dipalmitoylphosphatidylcholine (DPPC) and various amounts of cholesterol (Chol), where the lipid membrane shows a phase separation into a DPPC-rich liquid-ordered (L(o)) phase and a DOPC-rich liquid-disordered (L(d)) phase. We find that UV illumination at 365 nm for 1 s induces the bursting of a significant fraction of the GUV population. The percentage of UV-induced disrupted vesicles, called bursting rate (Y(burst)), increases with an increase in [AzoTAB] and depends on [Chol] in a non-monotonous manner. Y(burst) decreases when [Chol] increases from 0 to 10 mol % and then increases with a further increase in [Chol], which can be correlated with the phase composition of the membrane. We show that Y(burst) increases with the appearance of solid domains ([Chol] = 0) or with an increase in area fraction of L(o) phase (with increasing [Chol] ≥ 10 mol %). Under our conditions (UV illumination at 365 nm for 1 s), maximal bursting efficiency (Y(burst) = 53%) is obtained for [AzoTAB] = 1 mM and [Chol] = 40 mol %. Finally, by restricting the illumination area, we demonstrate the first selective UV-induced bursting of individual target GUVs. These results show a new method to probe biomembrane mechanical properties using light as well as pave the way for novel strategies of light-induced drug delivery.

Photochemical control of molecular assembly formation in a catanionic surfactant system

Photochemical control of vesicle disintegration and reformation in aqueous solution was examined using a mixture of 4-butylazobenzene-4'-(oxyethyl)trimethylammonium bromide (AZTMA) as the photoresponsive cationic surfactant and sodium dodecylbenzenesulfonate (SDBS) as the anionic surfactant. Spontaneous vesicle formation was found in a wide-ranging composition of the trans-AZTMA/SDBS system. AZTMA molecules constituting vesicles underwent reversible trans-cis photoisomerization when irradiated with ultraviolet and visible light. Transmission electron microscopy observations using the freeze-fracture technique (FF-TEM) showed that UV light irradiation caused the vesicles to disintegrate into coarse aggregates and visible light irradiation stimulated the reformation of vesicles (normal control). A detailed investigation of the phase state and the effects of UV and visible light irradiation on the AZTMA/SDBS system with the use of electroconductivity, dynamic/static light scattering, and surface tension measurements and FF-TEM observations revealed that in the AZTMA-rich composition (AZTMA/SDBS 9:1) a micellar solution before light irradiation became a vesicular solution after UV light irradiation and visible light irradiation allowed the return to a micellar solution (reverse control). Thus, we could photochemically control the disintegration (normal control) and reformation (reverse control) of vesicles in the same system.

Effects of urea on the microstructure and phase behavior of aqueous solutions of polyoxyethylene surfactants

Membrane proteins are made soluble in aqueous buffers by the addition of various surfactants (detergents) to form so-called protein-detergent complexes (PDCs). Properties of membrane proteins are commonly assessed by unfolding the protein in the presence of surfactant in a buffer solution by adding urea. The stability of the protein under these conditions is then monitored by biophysical methods such as fluorescence or circular dichroism spectroscopy. Often overlooked in these experiments is the effect of urea on the phase behavior and micellar microstructure of the different surfactants used to form the PDCs. Here the effect of urea on five polyoxyethylene surfactants - n-octylytetraoxyethylene (C(8)E(4)), n-octylpentaoxyethylene (C(8)E(5)), n-decylhexaoxyethylene (C(10)E(6)), n-dodecylhexaoxyethylene (C(12)E(6)) and n-dodecyloctaoxylethylene (C(12)E(8)) - is explored. The presence of urea increases the critical micelle concentration (CMC) of all surfactants studied, indicating that the concentration of both the surfactant and urea should be considered in membrane protein folding studies. The cloud point temperature of all surfactants studied also increases with increasing urea concentration. Small-angle neutron scattering shows a urea-induced transition from an elongated to a globular shape for micelles of C(8)E(4) and C(12)E(6). In contrast, C(8)E(5) and C(12)E(8) form more globular micelles at room temperature and the micelles remain globular as the urea concentration is increased. The effects of increasing urea concentration on micelle structure are analogous to those of decreasing the temperature. The large changes in micelle structure observed here could also affect membrane protein unfolding studies by changing the structure of the PDC.

Small-angle neutron scattering study of the micellization of photosensitive surfactants in solution and in the presence of a hydrophobically modified polyelectrolyte

The self-assembly behavior of a light-sensitive azobenzene-based surfactant, both in pure surfactant solutions and in the presence of a hydrophobically modified, water-soluble polymer, has been investigated using small-angle neutron scattering (SANS), light scattering, and UV-vis absorption techniques. The surfactant undergoes reversible photoisomerization upon exposure to the appropriate wavelength of light, with the trans form predominant under visible light being more hydrophobic than the cis isomer under UV-light. As a result, the trans form exhibits a lower critical micelle concentration than does the cis form of the surfactant, allowing photoreversible control of micelle formation. The SANS measurements reveal that micelle formation in pure surfactant solutions with the trans surfactant proceeds as commonly observed in traditional alkyl-based surfactants. Fully developed micelles were observed with aggregation numbers >50, whereas the micelle shapes are consistent with triaxial ellipsoids with axes R(a), R(b), and R(c) approximately equal to 20, 30, and 30-35 A, respectively. In contrast, with the surfactant in the cis conformation disk-shaped premicellar aggregates were observed at low surfactant concentrations with aggregation numbers <10, thicknesses of 6-10 A, and radii of 10-20 A whereas elevated cis-azoTAB concentrations eventually gave rise to fully developed micelles akin to the trans micelles. This stark difference between the self-assembly behavior of the two azobenzene isomers is ascribed to the different geometries of the surfactant in the trans (planar) and cis (bent) conformation. In the presence of the hydrophobically modified polymer, however, both surfactant isomers resulted in well-developed micelles at the respective critical aggregation concentrations (cac's), presumably because of the effect of the dodecyl side chains attached to the polymer on the conformation of the mixed alkyl-azobenzene micelles.

Spatial and temporal control of surfactant systems

This paper reviews some recent progress on approaches leading to spatial and temporal control of surfactant systems. The approaches revolve around the use of redox-active and light-sensitive surfactants. Perspectives are presented on experiments that have realized approaches for active control of interfacial properties of aqueous surfactant systems, reversible control of microstructures and nanostructures formed within bulk solutions, and in situ manipulation of the interactions of surfactants with polymers, DNA and proteins. A particular focus of this review is devoted to studies of amphiphiles that contain the redox-active group ferrocene - reversible control of the oxidation state of ferrocene leads to changes in the charge/hydrophobicity of these amphiphiles, resulting in substantial changes in their self-assembly. Light-sensitive surfactants containing azobenzene, which undergo changes in shape/polarity upon illumination with light, are a second focus of this review. Examples of both redox-active and light-sensitive surfactants that lead to large (>20mN/m) and spatially localized ( approximately mm) changes in surface tensions on a time scale of seconds are presented. Systems that permit reversible transformations of bulk solution nanostructures - such as micelle-to-vesicle transitions or monomer-to-micelle transitions - are also described. The broad potential utility of these emerging classes of amphiphiles are illustrated by the ability to drive changes in functional properties of surfactant systems, such as rheological properties and reversible solubilization of oils, as well as the ability to control interactions of surfactants with biomolecules to modulate their transport into cells.

Photo-assisted gene delivery using light-responsive catanionic vesicles

Photoresponsive catanionic vesicles have been developed as a novel gene delivery vector combining enhanced cellular uptake with phototriggered release of vesicle payload following entry into cells. Vesicles with diameters ranging from 50 to 200 nm [measured using cryo-transmission electron microscopy (TEM) and light-scattering techniques] form spontaneously, following mixing of positively charged azobenzene-containing surfactant and negatively charged alkyl surfactant species. Fluorescent probe measurements showed that the catanionic vesicles at a cation/anion ratio of 7:3 formed at surfactant concentrations as low as 10 microM of the azobenzene surfactant under visible light (with the azobenzene surfactant species principally in the trans configuration), while 50-60 microM of the azobenzene surfactant is required to form vesicles under UV illumination (with the azobenzene surfactant species principally in the cis configuration). At intermediate surfactant concentrations (ca. 15-45 microM) under visible light conditions, transport of DNA-vesicle complexes occurred past the cell membrane of murine fibroblast NIH 3T3 cells through endocytosis. Subsequent UV illumination induced rupture of the vesicles and release of uncomplexed DNA into the cell interiors, where it was capable of passing through the nuclear membrane and thereby contributing to enhanced expression. Single-molecule fluorescent images of T4-DNA demonstrated that the formation of vesicles with a net positive charge led to compaction of DNA molecules via complex formation within a few seconds, while UV-induced disruption of the vesicle-DNA complexes led to DNA re-expansion to the elongated-coil state, also within a few seconds. Transfection experiments with eGFP DNA revealed that photoresponsive catanionic vesicles are more effectively taken up by cells compared to otherwise identical alkyl (i.e., nonazobenzene-containing and thus nonlight-responsive) catanionic vesicles, presumably because of pi-pi stacking interactions that enhance bilayer rigidity in the photoresponsive vesicles. Subsequent UV illumination following endocytosis leads to further dramatic enhancements in the transfection efficiencies, demonstrating that vector unpacking and release of DNA from the carrier complex can be the limiting step in the overall process of gene delivery.

Arresting amphiphilic self-assembly

Amphiphilic self-assembly has become the basis for a wide gamut of materials and commercial product applications. In many situations however, the best use of self-assembling complex fluids comes when their microstructures can be made permanent. The impetus for a static microstructure can often be such that an alternative non-aqueous media is preferable. Highlighted here is a new approach to capturing self-assembly through replacement of water in traditional complex fluids with sugars to form room temperature complex glasses. Combining solid and liquid properties at the nanoscale, complex glasses have broad potential applications in encapsulation and materials template synthesis.

Small-angle neutron scattering measurement of silicon nanoparticle size

We have determined the particle size distribution profiles of octane-terminated silicon nanoparticle suspensions, produced using the sonication of electrochemically etched Si wafers. Small-angle neutron scattering data was analyzed separately in high (0.4 nm(-1)<q<3.0 nm(-1)) and low (q<0.4 nm(-1)) scattering vector ranges. Data in the high q range is consistent with the log-normal distribution of isolated spherical particles with median diameter d = 3 ± 0.2 nm. Particle sizes were also indirectly assessed from photoluminescence and optical transmission spectroscopy using the size/bandgap relation: E(g) = 3.44d(-0.5), where E(g) is in eV and d in nm. Both measurements were consistent with the particle size distribution profiles, estimated from ANS data fitting and TEM image analysis. A subpopulation of larger, irregular shape structures in the size range 10-50 nm was also indicated by neutron scattering in the low q range and HRTEM images. However, further studies are warranted to explain a relationship between the slope of scattering intensity versus scattering vector dependence in the intermediate scattering vector range (0.4 nm(-1)<q<1.0 nm(-1)) and the role of non-geometrical Si nanoparticle characteristics (mutual interaction forces, surface termination, etc).

NMR diffusometry and conductometry study of the host–guest association between β-cyclodextrin and dodecane 1,12-bis(trimethylammonium bromide)

Surfactants form association complexes with cyclodextrins. In the present investigation we have used NMR-diffusometry and electrical conductivity to follow the interactions which take place between beta-cyclodextrin and a bolaform surfactant: dodecane 1,12-bis(trimethylammonium bromide). Both (1)H NMR self-diffusion and conductometry data indicate the formation of a 1:1 inclusion complex. Assuming this stoichiometry, it was possible to calculate the association constant; from the analysis of the self-diffusion coefficients of free beta-cyclodextrin and the bolaform surfactant an association constant K=3x10(3)M(-1) was obtained while the analysis of conductivity data gave a comparable value of K=2.5x10(3)M(-1).

Self-assembly of a nonionic photoresponsive surfactant under varying irradiation conditions: a small-angle neutron scattering and cryo-TEM study

We have used small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) to determine the structure of aggregates formed by the photoresponsive surfactants diethylene glycol mono(4',4-butyloxy, butyl-azobenzene) (C4AzoOC4E2) and diethylene glycol mono(4',4-hexyloxy, butyl-azobenzene) (C4AzoOC6E2) under different illumination conditions. At high concentrations, the self-assembly behavior of these surfactants changes remarkably in response to different radiation conditions. The trans isomers assemble into bilamellar (C4AzoOC4E2) and unilamellar (C4AzoOC6E2) vesicles, while the cis isomers (under UV light) form bicontinuous phases. These light-induced structural changes are attributed to a change in the sign of the Gaussian rigidity, which is the direct result of azobenzene photoisomerization.

Photodestructible vesicles

Stable vesicles are formed in a 1.4 wt % solution comprising a 1:3 mixture of the anionic photodestructible surfactant sodium 4-hexylphenylazosulfonate (C6PAS) and inert cationic cetyltrimethylamonium bromide (CTAB). UV irradiation drives an irreversible breakdown of the mixed C6PAS/CATB vesicles, owing to the selective degradation of C6PAS. A light-induced transition from small spherical-like polydisperse vesicles to long needle-like aggregation is observed.