Cisplatin nanoliposomes for cancer therapy: AFM and fluorescence imaging of cisplatin encapsulation, stability, cellular uptake, and toxicity

Platinum-based chemotherapy: trends in organic nanodelivery systems

Despite the investment in platinum drugs research, cisplatin, carboplatin and oxaliplatin are still the only Pt-based compounds used as first line treatments for several cancers, with a few other compounds being approved for administration in some Asian countries. However, due to the severe and worldwide impact of oncological diseases, there is an urge for improved chemotherapeutic approaches. Furthermore, the pharmaceutical application of platinum complexes is hindered by their inherent toxicity and acquired resistance. Nanodelivery systems rose as a key strategy to overcome these challenges, with recognized versatility and ability towards improving the safety, bioavailability and efficacy of the available drugs. Among the known nanocarriers, organic systems have been widely applied, taking advantage of their potential as drug vehicles. Researchers have mainly focused on the development of lipidic and polymeric carriers, including supramolecular structures, with an overall improvement of encapsulated platinum complexes. Herein, an overview of recent trends and strategies is presented, with the main focus on the encapsulation of platinum compounds into organic nanocarriers, showcasing the evolution in the design and development of these promising systems. This comprehensive review highlights formulation methods as well as characterization procedures, providing insights that may be helpful for the development of novel platinum nanocarriers aiming at future pharmaceutical applications.

Green-step assembly of the supramolecular amphiphile constructed by sodium carboxymethyl cellulose and calixarene for facile loading of hydrophobic food bioactive compounds

The use of biologically active compounds is often limited due to their poor aqueous solubility, which generally reduces their bioavailability and useful efficacy. In this regard, a wide search is currently underway for colloidal systems capable of encapsulating these compounds. In the creation of colloidal systems, long-chain molecules of surfactants and polymers are mainly used, which in an individual state do not always aggregate into homogeneous and stable nanoparticles. In the present work, cavity-bearing calixarene was used for the first time to order polymeric molecules of sodium carboxymethyl cellulose. A set of physicochemical methods demonstrated the spontaneous formation of spherical nanoparticles by non-covalent self-assembly contributed by macrocycle and polymer, and formed nanoparticles were able to encapsulate hydrophobic quercetin and oleic acid. The preparation of nanoparticles by supramolecular self-assembly without use of organic solvents, temperature and ultrasound effects can be an effective strategy for creating water-soluble forms of lipophilic bioactive compounds.

Revisiting the Anti-Cancer Toxicity of Clinically Approved Platinating Derivatives

Cisplatin (CDDP), carboplatin (CP), and oxaliplatin (OXP) are three platinating agents clinically approved worldwide for use against a variety of cancers. They are canonically known as DNA damage inducers; however, that is only one of their mechanisms of cytotoxicity. CDDP mediates its effects through DNA damage-induced transcription inhibition and apoptotic signalling. In addition, CDDP targets the endoplasmic reticulum (ER) to induce ER stress, the mitochondria via mitochondrial DNA damage leading to ROS production, and the plasma membrane and cytoskeletal components. CP acts in a similar fashion to CDDP by inducing DNA damage, mitochondrial damage, and ER stress. Additionally, CP is also able to upregulate micro-RNA activity, enhancing intrinsic apoptosis. OXP, on the other hand, at first induces damage to all the same targets as CDDP and CP, yet it is also capable of inducing immunogenic cell death via ER stress and can decrease ribosome biogenesis through its nucleolar effects. In this comprehensive review, we provide detailed mechanisms of action for the three platinating agents, going beyond their nuclear effects to include their cytoplasmic impact within cancer cells. In addition, we cover their current clinical use and limitations, including side effects and mechanisms of resistance.

Liposomes as Versatile Platform for Cancer Theranostics: Therapy, Bio-imaging, and Toxicological Aspects

Liposomes are nano-sized formulations having the benefits of site-specificity, biocompatibility, and biodegradability, which make them useful for the therapy and diagnosis of major diseases like cancer. In this review, various synthetic strategies of liposomes and their biomedical application in special concern to cancer are discussed. In context to the biomedical application, this article gives a detailed insight into subcellular targeted therapy and several therapeutic modifications like immunotherapy, receptor-based therapy, phototherapy, and combination therapy. The review also describes the liposome-based imaging platforms and the toxicity associated with liposomes. Owing to a significant amount of benefits of this carrier system, several products have been approved to be launched in the market and several others have already been marketed for clinical use.

The Permeation Mechanism of Cisplatin Through a Dioleoylphosphocholine Bilayer*

The investigation of the intermolecular interactions between platinum-based anticancer drugs and lipid bilayers is of special relevance to unveil the mechanisms involved in different steps of the anticancer mode of action of these drugs. We have simulated the permeation of cisplatin through a model membrane composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine lipids by means of umbrella sampling classical molecular dynamics simulations. The initial physisorption of cisplatin into the polar region of the lipid membrane is controlled by long-range electrostatic interactions with the choline groups in a first step and, in a second step, by long-range electrostatic and hydrogen bond interactions with the phosphate groups. The second half of the permeation pathway, in which cisplatin diffuses through the nonpolar region of the bilayer, is characterized by the drop of the interactions with the polar heads and the rise of attractive interactions with the non-polar tails, which are dominated by van der Waals contributions. The permeation free-energy profile is explained by a complex balance between the drug/lipid interactions and the energy and entropy contributions associated with the dehydration of the drug along the permeation pathway and with the decrease and increase of the membrane ordering along the first and second half of the mechanism, respectively.

Methodology for characterization of platinum-based drug's targeted delivery nanosystems

Conventional anticancer therapies exploiting platinum-based drugs rely principally on the intravascular injection of the therapeutic agent. The anticancer drug is distributed throughout the body by the systemic blood circulation undergoing cellular uptake, rapid clearance and excretion. Consequently, only a small portion of the platinum-based drug reaches the tumor site, which is associated with severe side effects. For this reason, targeted delivery systems are of great need since they offer enhanced and selective delivery of a drug to cancerous cells making the therapy safe and more effective. Up to date, a variety of the Pt-based drug targeted delivery systems (Pt-based DTDSs) utilizing nanomaterials have been developed and tested using a range of analytical techniques that provided essential information on their synthesis, stability, biodistribution and cytotoxicity. Here we summarize those experimental techniques indicating their applicability at different stages of the research, as well as pointing out their strengths, advantages, drawbacks and limitations. Also, the existing strategies and approaches are critically reviewed with the objective to reveal and give rise to the development of the analytical methodology suitable for reliable Pt-based DTDSs characterization which would eventually result in novel therapies and better patients' outcomes.

Supraamphiphilic Systems Based on Metallosurfactant and Calix[4]resorcinol: Self-Assembly and Drug Delivery Potential

Metallic amphiphiles are used as building blocks in the construction of nanoscale superstructures, where the hydrophobic effects induce the self-assembly of the nanoparticles of interest. However, the influence of synergizing multiple chemical interactions on an effective design of these structures mostly remains an open question. In this regard, supraamphiphilic systems based on flexible surfactant molecules and rigid macrocycles are being actively developed, but there are few works on the interaction between metallosurfactants and macrocycles. In the present work, the self-assembly and biological properties of a metallosurfactant with calixarene were studied for the first time. The metallosurfactant, a complex between lanthanum nitrate and two 4-aza-1-hexadecylazoniabicyclo[2.2.2]octane bromide units, and calix[4]resorcinol containing sulfonate groups on the upper rim were used to form a novel supraamphiphilic composition. The system formed was studied using a variety of physicochemical methods, including spectrophotometry, NMR, XRF, and dynamic and electrophoretic light scattering. It was found that the most optimal tetraanionic calix[4]resorcinol to dicationic metallosurfactant molar ratio, leading to mixed aggregation upon ion pair complexation, is 2:3. The mixed aggregates formed in the pentamolar concentration range were able to encapsulate hydrophilic substrates, including the anticancer drug cisplatin, the pure form of which is more cytotoxic toward healthy cells than toward diseased cells. Interestingly, the drug loaded into the macrocycle-metallosurfactant particles was less cytotoxic to a healthy Chang liver cell line and more cytotoxic to tumor M-HeLa cells. This selectivity depends on the amount of cisplatin added. The more drug is added to the macrocycle-metallosurfactant composition, the greater the biological activity against cancer cells. Taking into account that the appearance of resistance of cancer cells to drugs, especially to cisplatin, is one of the most important problems in treatment, the results of this work envisage the potential application of a mixed macrocycle-metallosurfactant system for the design of therapeutic cisplatin compositions.

Retinal photoreceptors targeting SA-g-AA coated multilamellar liposomes carrier system for cytotoxicity and cellular uptake evaluation

Here, the retinal targeting SA-g-AA coated multilamellar liposomes carrier synthesized to deliver the bioactive agents into the retinal region of the eye. The multilayered targeting macromolecules of liposomes prepared using a layer-by-layer assembly. The curcumin (CUR) and Rhodamine B (RhB) dyes loaded in a multilamellar vesicle (MLV) were synthesised by the lipid film hydration method. The sodium alginate grafted acrylic acid (SA-g-AA) conjugated with riboflavin (RB) was coated over MLV by O/W emulsion method followed by ionotropic gelation. FT-IR and ¹H NMR spectroscopy techniques used to analyse the structural features of the MLV-SA-g-AA-RB. The results of DLS and TEM revealed that the carrier could be of uniform spheres, with a low polydispersity index, and outstanding performance in phrases of dye encapsulation and extended-release ability. An MTT assay investigated cell viability against Fibroblast WS1, and human embryonic stem cells-derived retinal pigment epithelial cells (hESC-RPE) implied that the carrier is of excellent biocompatibility. Retina targeting nature of the system confirmed via cellular uptake results revealed that the increases the dye concentration in the cells. Overall, the outcomes suggested that carriers could lead to the improvement of a feasible two photoreceptors targeting drug carriers, and it has the potential to deliver the multidrug in the retinal region of the eye.

Morphology and microstructural analysis of bioactive-loaded micro/nanocarriers via microscopy techniques; CLSM/SEM/TEM/AFM

Efficient characterization of the physicochemical attributes of bioactive-loaded micro/nano-vehicles is crucial for the successful product development. The introduction of outstanding science-based strategies and techniques makes it possible to realize how the characteristics of the formulation ingredients affect the structural and (bio)functional properties of the final bioactive-loaded carriers. The important points to be solved, at a microscopic level, are investigating how the features of the formulation ingredients affect the morphology, surface, size, dispersity, as well as the particulate interactions within bioactive-comprising nano/micro-delivery systems. This review presents a detailed description concerning the application of advanced microscopy techniques, i.e., confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) in characterizing the attributes of nano/microcarriers for the efficient delivery of bioactive compounds. Furthermore, the fundamental principles of these approaches, instrumentation, specific applications, and the strategy to choose the most proper technique for different carriers has been discussed.

Comparative study between lutein and its liposomal form on cisplatin-induced retinal injury in rabbits

Aim: Lutein is a potent antioxidant that is found in ocular tissue. It protects retina against oxidative stress. We aimed to increase lutein efficiency by encapsulating it into liposome and testing its neuroprotective effect against cisplatin-induced retinal injury in rabbits. Materials and methods: Twenty-four male, New Zealand, rabbits weighing 1.5-2 kg were divided into four groups, as follows: group I as a control, group II received cisplatin, group III received free lutein + cisplatin and group IV received liposomal lutein + cisplatin. All treatments were administrated twice per week for 14 days. Electroretinogram (ERG) was recorded for all rabbits just before decapitation. Then, the retinae were subjected to histopathological evaluations and comet assay. Results: Results indicated significant decrease (p ˂ 0.01) in ERG waves, significant increase (p ˂ 0.01) in all parameters of comet assay (% tailed cells, tail length, DNA% in tail and tail moment), severe fragmentation in photoreceptors layer and changes in inner retina after the administration of cisplatin. There were some sort of improvement in ERG, comet assay and the histological results after the administration of lutein with cisplatin, whereas these tests yielded values comparable to control in the liposomal lutein group. Conclusions: Liposomal lutein administration could prevent the detrimental effects of cisplatin on the retina, while avoiding the use any artificial chemicals. The latter might be preferable but with possible highly toxic effects. Results were promising and worse further future investigations.

Cisplatin-Membrane Interactions and Their Influence on Platinum Complexes Activity and Toxicity

Cisplatin and other platinum(II) analogs are widely used in clinical practice as anti-cancer drugs for a wide range of tumors. The primary mechanism by which they exert their action is through the formation of adducts with genomic DNA. However, multiple cellular targets by platinum(II) complexes have been described. In particular, the early events occurring at the plasma membrane (PM), i.e., platinum-membrane interactions seem to be involved in the uptake, cytotoxicity and cell-resistance to cisplatin. In fact, PM influences signaling events, and cisplatin-induced changes on membrane organization and fluidity were shown to activate apoptotic pathways. This review critically discusses the sequence of events caused by lipid membrane-platinum interactions, with emphasis on the mechanisms that lead to changes in the biophysical properties of the membranes (e.g., fluidity and permeability), and how these correlate with sensitivity and resistance phenotypes of cells to platinum(II) complexes.

Chemotherapeutic resistance: a nano-mechanical point of view

Chemotherapeutic resistance is one of the main obstacles for cancer remission. To understand how cancer cells acquire chemotherapeutic resistance, biochemical studies focusing on drug target alteration, altered cell proliferation, and reduced susceptibility to apoptosis were performed. Advances in nano-mechanobiology showed that the enhanced mechanical deformability of cancer cells accompanied by cytoskeletal alteration is a decisive factor for cancer development. Furthermore, atomic force microscopy (AFM)–based nano-mechanical studies showed that chemotherapeutic treatments reinforced the mechanical stiffness of drug-sensitive cancer cells. However, drug-resistant cancer cells did not show such mechanical responses following chemotherapeutic treatments. Interestingly, drug-resistant cancer cells are mechanically heterogeneous, with a subpopulation of resistant cells showing higher stiffness than their drug-sensitive counterparts. The signaling pathways involving Rho, vinculin, and myosin II were found to be responsible for these mechanical alterations in drug-resistant cancer cells. In the present review, we highlight the mechanical aspects of chemotherapeutic resistance, and suggest how mechanical studies can contribute to unravelling the multifaceted nature of chemotherapeutic resistance.

Atomic Force Microscopy Study on the Stiffness of Nanosized Liposomes Containing Charged Lipids

It has recently been recognized that the mechanical properties of lipid nanoparticles play an important role during in vitro and in vivo behaviors such as cellular uptake, blood circulation, and biodistribution. However, there have been no quantitative investigations of the effect of commonly used charged lipids on the stiffness of nanosized liposomes. In this study, by means of atomic force microscopy (AFM), we quantified the stiffness of nanosized liposomes composed of neutrally charged lipids combined with positively or negatively charged lipids while simultaneously imaging the liposomes in aqueous medium. Our results showed that charged lipids, whether negatively or positively charged, have the effect of reducing the stiffness of nanosized liposomes, independently of the saturation degree of the lipid acyl chains; the measured stiffness values of liposomes containing charged lipids are 30-60% lower than those of their neutral counterpart liposomes. In addition, we demonstrated that the Laurdan generalized polarization values, which are related to the hydration degree of the liposomal membrane interface and often used as a qualitative indicator of liposomal membrane stiffness, do not directly correlate with the physical stiffness values of the liposomes prepared in this study. However, our results indicate that direct quantitative AFM measurement is a valuable method to gain molecular-scale information about how the hydration degree of liposomal interfaces reflects (or does not reflect) liposome stiffness as a macroscopic property. Our AFM method will contribute to the quantitative characterization of the nano-bio interaction of nanoparticles and to the optimization of the lipid composition of liposomes for clinical use.

Mechanical determination of particle–cell interactions and the associated biomedical applications

Mechanical determination of particle–cell interactions and the associated biomedical applications.

Multifunctional stimuli responsive polymer-gated iron and gold-embedded silica nano golf balls: Nanoshuttles for targeted on-demand theranostics

Multi-functional nanoshuttles for remotely targeted and on-demand delivery of therapeutic molecules and imaging to defined tissues and organs hold great potentials in personalized medicine, including precise early diagnosis, efficient prevention and therapy without toxicity. Yet, in spite of 25 years of research, there are still no such shuttles available. To this end, we have designed magnetic and gold nanoparticles (NP)-embedded silica nanoshuttles (MGNSs) with nanopores on their surface. Fluorescently labeled Doxorubicin (DOX), a cancer drug, was loaded in the MGNSs as a payload. DOX loaded MGNSs were encapsulated in heat and pH sensitive polymer P(NIPAM-co-MAA) to enable controlled release of the payload. Magnetically-guided transport of MGNSs was examined in: (a) a glass capillary tube to simulate their delivery via blood vessels; and (b) porous hydrogels to simulate their transport in composite human tissues, including bone, cartilage, tendon, muscles and blood-brain barrier (BBB). The viscoelastic properties of hydrogels were examined by atomic force microscopy (AFM). Cellular uptake of DOX-loaded MGNSs and the subsequent pH and temperature-mediated release were demonstrated in differentiated human neurons derived from induced pluripotent stem cells (iPSCs) as well as epithelial HeLa cells. The presence of embedded iron and gold NPs in silica shells and polymer-coating are supported by SEM and TEM. Fluorescence spectroscopy and microscopy documented DOX loading in the MGNSs. Time-dependent transport of MGNSs guided by an external magnetic field was observed in both glass capillary tubes and in the porous hydrogel. AFM results affirmed that the stiffness of the hydrogels model the rigidity range from soft tissues to bone. pH and temperature-dependent drug release analysis showed stimuli responsive and gradual drug release. Cells' viability MTT assays showed that MGNSs are non-toxic. The cell death from on-demand DOX release was observed in both neurons and epithelial cells even though the drug release efficiency was higher in neurons. Therefore, development of smart nanoshuttles have significant translational potential for controlled delivery of theranostics' payloads and precisely guided transport in specified tissues and organs (for example, bone, cartilage, tendon, bone marrow, heart, lung, liver, kidney, and brain) for highly efficient personalized medicine applications.

AFM nanoindentation of protein shells, expanding the approach beyond viruses

The archetypical protein nanoshell is the capsid that surrounds viral genomes. These capsids protect the viral RNA or DNA and function as transport vehicle for their nucleic acid. The material properties of a variety of viral capsids have been probed by Atomic Force Microscopy. In particular nanoindentation measurements revealed the complex mechanics of these shells and the intricate interplay of the capsid with its genomic content. Furthermore, effects of capsid protein mutations, capsid maturation and the effect of environmental changes have been probed. In addition, biological questions have been addressed by AFM nanoindentation of viruses and a direct link between mechanics and infectivity has been revealed. Recently, non-viral protein nanoshells have come under intense scrutiny and now the nanoindentation approach has been expanded to such particles as well. Both natural as well as engineered non-viral protein shells have been probed by this technique. Next to the material properties of viruses, therefor also the mechanics of encapsulins, carboxysomes, vault particles, lumazine synthase and artificial protein nanoshells is discussed here.

Direct measurement of interaction forces between a platinum dichloride complex and DNA molecules

The interaction forces between a platinum dichloride complex and DNA molecules have been studied using atomic force microscopy (AFM). The platinum dichloride complex, di-dimethylsulfoxide-dichloroplatinum (II) (Pt(DMSO)₂Cl₂), was immobilized on an AFM probe by coordinating the platinum to two amino groups to form a complex similar to Pt(en)Cl₂, which is structurally similar to cisplatin. The retraction forces were measured between the platinum complex and DNA molecules immobilized on mica plates using force curve measurements. The histogram of the retraction force for λ-DNA showed several peaks; the unit retraction force was estimated to be 130 pN for a pulling rate of 60 nm/s. The retraction forces were also measured separately for four single-base DNA oligomers (adenine, guanine, thymine, and cytosine). Retraction forces were frequently observed in the force curves for the DNA oligomers of guanine and adenine. For the guanine DNA oligomer, the most frequent retraction force was slightly lower than but very similar to the retraction force for λ-DNA. A higher retraction force was obtained for the adenine DNA oligomer than for the guanine oligomer. This result is consistent with a higher retraction activation energy of adenine with the Pt complex being than that of guanine because the kinetic rate constant for retraction correlates to exp(FΔx - ΔE) where ΔE is an activation energy, F is an applied force, and Δx is a displacement of distance.

Changes in the biomechanical properties of a single cell induced by nonthermal atmospheric pressure micro-dielectric barrier discharge plasma

Mechanical properties of a single cell are closely related to the fate and functions of the cell. Changes in mechanical properties may cause diseases or cell apoptosis. Selective cytotoxic effects of nonthermal atmospheric pressure micro-dielectric barrier discharge (DBD) plasma have been demonstrated on cancer cells. In this work, changes in the mechanical properties of a single cell induced by nonthermal atmospheric pressure micro-DBD plasma were investigated using atomic force microscopy (AFM). Two cervical cancer cell lines (HeLa and SiHa) and normal human fibroblast cells (HFBs) were exposed to micro-DBD plasma for various exposure times. The elasticity of a single cell was determined by force-distance curve measurement using AFM. Young's modulus was decreased by plasma treatment for all cells. The Young's modulus of plasma-treated HeLa cells was decreased by 75% compared to nontreated HeLa cells. In SiHa cells and HFBs, elasticity was decreased slightly. Chemical changes induced by the plasma treatment, which were observed by Raman spectroscopy, were also significant in HeLa cells compared to SiHa cells and HFBs. These results suggested that the molecular changes induced by micro-DBD plasma were related to cell mechanical changes.

Mechanical Properties of Membranes Composed of Gel-Phase or Fluid-Phase Phospholipids Probed on Liposomes by Atomic Force Spectroscopy

In many liposome applications, the nanomechanical properties of the membrane envelope are essential to ensure, e.g., physical stability, protection, or penetration into tissues. Of all factors, the lipid composition and its phase behavior are susceptible to tune the mechanical properties of membranes. To investigate this, small unilamellar vesicles (SUV; diameter < 200 nm), referred to as liposomes, were produced using either unsaturated 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) or saturated 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) in aqueous buffer at pH 6.7. The respective melting temperatures of these phospholipids were -20 and 41 °C. X-ray diffraction analysis confirmed that at 20 °C DOPC was in the fluid phase and DPPC was in the gel phase. After adsorption of the liposomes onto flat silicon substrates, atomic force microscopy (AFM) was used to image and probe the mechanical properties of the liposome membrane. The resulting force-distance curves were treated using an analytical model based on the shell theory to yield the Young's modulus (E) and the bending rigidity (k_C) of the curved membranes. The mechanical investigation showed that DPPC membranes were much stiffer (E = 116 ± 45 MPa) than those of DOPC (E = 13 ± 9 MPa) at 20 °C. The study demonstrates that the employed methodology allows discrimination of the respective properties of gel- or fluid-phase membranes when in the shape of liposomes. It opens perspectives to map the mechanical properties of liposomes containing both fluid and gel phases or of biological systems.

Electrohydrodynamic fabrication of core-shell PLGA nanoparticles with controlled release of cisplatin for enhanced cancer treatment

Increasing the clinical efficacy of toxic chemotherapy drugs such as cisplatin (CDDP), via targeted drug delivery, is a key area of research in cancer treatment. In this study, CDDP-loaded poly(lactic-co-glycolic acid) (PLGA) polymeric nanoparticles (NPs) were successfully prepared using electrohydrodynamic atomization (EHDA). The configuration was varied to control the distribution of CDDP within the particles, and high encapsulation efficiency (>70%) of the drug was achieved. NPs were produced with either a core-shell (CS) or a matrix (uniform) structure. It was shown that CS NPs had the most sustained release of the 2 formulations, demonstrating a slower linear release post initial "burst" and longer duration. The role of particle architecture on the rate of drug release in vitro was confirmed by fitting the experimental data with various kinetic models. This indicated that the release process was a simple diffusion mechanism. The CS NPs were effectively internalized into the endolysosomal compartments of cancer cells and demonstrated an increased cytotoxic efficacy (concentration of a drug that gives half maximal response [EC50] reaching 6.2 µM) compared to free drug (EC50 =9 µM) and uniform CDDP-distributed NPs (EC50 =7.6 µM) in vitro. Thus, these experiments indicate that engineering the structure of PLGA NPs can be exploited to control both the dosage and the release characteristics for improved clinical chemotherapy treatment.

Competition between Bending and Internal Pressure Governs the Mechanics of Fluid Nanovesicles

Nanovesicles (∼100 nm) are ubiquitous in cell biology and an important vector for drug delivery. Mechanical properties of vesicles are known to influence cellular uptake, but the mechanism by which deformation dynamics affect internalization is poorly understood. This is partly due to the fact that experimental studies of the mechanics of such vesicles remain challenging, particularly at the nanometer scale where appropriate theoretical models have also been lacking. Here, we probe the mechanical properties of nanoscale liposomes using atomic force microscopy (AFM) indentation. The mechanical response of the nanovesicles shows initial linear behavior and subsequent flattening corresponding to inward tether formation. We derive a quantitative model, including the competing effects of internal pressure and membrane bending, that corresponds well to these experimental observations. Our results are consistent with a bending modulus of the lipid bilayer of ∼14kbT. Surprisingly, we find that vesicle stiffness is pressure dominated for adherent vesicles under physiological conditions. Our experimental method and quantitative theory represents a robust approach to study the mechanics of nanoscale vesicles, which are abundant in biology, as well as being of interest for the rational design of liposomal vectors for drug delivery.

Characterization of Gd loaded chitosan-TPP nanohydrogels by a multi-technique approach combining dynamic light scattering (DLS), asymetrical flow-field-flow-fractionation (AF4) and atomic force microscopy (AFM) and design of positive contrast agents for molecular resonance imaging (MRI)

Chitosan CS-tripolyphosphate TPP/hyaluronic acid HA nanohydrogels loaded with gadolinium chelates (GdDOTA ⊂ CS-TPP/HA NGs) synthesized by ionic gelation were designed for lymph node (LN) MRI. In order to be efficiently drained to LNs, nanogels (NGs) needed to exhibit a diameter ϕ < 100 nm. For that, formulation parameters were tuned, using (i) CS of two different molecular weights (51 and 37 kDa) and (ii) variable CS/TPP ratio (2 < CS/TPP < 8). Characterization of NG size distribution by dynamic light scattering (DLS) and asymetrical flow-field-flow-fractionation (AF4) showed discrepancies since DLS diameters were consistently above 200 nm while AF4 showed individual nano-objects with ϕ < 100 nm. Such a difference could be correlated to the presence of aggregates inherent to ionic gelation. This point was clarified by atomic force microscopy (AFM) in liquid mode which highlighted the main presence of individual nano-objects in nanosuspensions. Thus, combination of DLS, AF4 and AFM provided a more precise characterization of GdDOTA ⊂ CS-TPP/HA nanohydrogels which, in turn, allowed to select formulations leading to NGs of suitable mean sizes showing good MRI efficiency and negligible toxicity.

Medical applications of the intrinsic mechanical properties of single cells

The mechanical properties of single cells have been recently identified as the basis of an emerging approach in medical applications because they are closely related to the biological processes of cells and, ultimately, human health conditions. In this article, we provide a brief review of the intrinsic mechanical properties of single cells related to cancer and aging. The mechanical properties can be used as biomarkers for early cancer diagnosis because cancer cells have a lower Young's modulus, indicating higher elasticity or softness than their counterpart normal cells. The metastatic potential of cancer cells is inversely correlated with their elastic properties. Aging induces stiffness through an increased amount of cytoskeletal fiber. Changes in the mechanical properties also show potential for drug screening. Although there are several challenges to be met before clinical applications can be made, such mechanical properties of single cells may provide new approaches to human diseases.

Electrohydrodynamic encapsulation of cisplatin in poly (lactic-co-glycolic acid) nanoparticles for controlled drug delivery

Targeted delivery of potent, toxic chemotherapy drugs, such as cisplatin, is a significant area of research in cancer treatment. In this study, cisplatin was successfully encapsulated with high efficiency (>70%) in poly (lactic-co-glycolic acid) polymeric nanoparticles by using electrohydrodynamic atomization (EHDA) where applied voltage and solution flow rate as well as the concentration of cisplatin and polymer were varied to control the size of the particles. Thus, nanoparticles were produced with three different drug:polymer ratios (2.5, 5 and 10wt% cisplatin). It was shown that smaller nanoparticles were produced with 10wt% cisplatin. Furthermore, these demonstrated the best sustained release (smallest burst release). By fitting the experimental data with various kinetic models it was concluded that the release is dependent upon the particle morphology and the drug concentration. Thus, these particles have significant potential for cisplatin delivery with controlled dosage and release period that are crucial chemotherapy parameters.

Magnetically-responsive silica-gold nanobowls for targeted delivery and SERS-based sensing

Composite colloidal structures with multi-functional properties have wide applications in targeted delivery of therapeutics and imaging contrast molecules and high-throughput molecular bio-sensing. We have constructed a multifunctional composite magnetic nanobowl using the bottom-up approach on an asymmetric silica/polystyrene Janus template consisting of a silica shell around a partially exposed polystyrene core. The nanobowl consists of a silica bowl and a gold exterior shell with iron oxide magnetic nanoparticles sandwiched between the silica and gold shells. The nanobowls were characterized by electron microscopy, atomic force microscopy, magnetometry, vis-NIR and FTIR spectroscopy. Magnetically vectored transport of these nanobowls was ascertained by time-lapsed imaging of their flow in fluid through a porous hydrogel under a defined magnetic field. These magnetically-responsive nanobowls show distinct surface enhanced Raman spectroscopy (SERS) imaging capability. The PEGylated magnetically-responsive nanobowls show size-dependent cellular uptake in vitro.

Microfluidic manufacture of rt-PA -loaded echogenic liposomes

Echogenic liposomes (ELIP), loaded with recombinant tissue-type plasminogen activator (rt-PA) and microbubbles that act as cavitation nuclei, are under development for ultrasound-mediated thrombolysis. Conventional manufacturing techniques produce a polydisperse rt-PA-loaded ELIP population with only a small percentage of particles containing microbubbles. Further, a polydisperse population of rt-PA-loaded ELIP has a broadband frequency response with complex bubble dynamics when exposed to pulsed ultrasound. In this work, a microfluidic flow-focusing device was used to generate monodisperse rt-PA-loaded ELIP (μtELIP) loaded with a perfluorocarbon gas. The rt-PA associated with the μtELIP was encapsulated within the lipid shell as well as intercalated within the lipid shell. The μtELIP had a mean diameter of 5 μm, a resonance frequency of 2.2 MHz, and were found to be stable for at least 30 min in 0.5 % bovine serum albumin. Additionally, 35 % of μtELIP particles were estimated to contain microbubbles, an order of magnitude higher than that reported previously for batch-produced rt-PA-loaded ELIP. These findings emphasize the advantages offered by microfluidic techniques for improving the encapsulation efficiency of both rt-PA and perflurocarbon microbubbles within echogenic liposomes.

Failure of Elevating Calcium Induces Oxidative Stress Tolerance and Imparts Cisplatin Resistance in Ovarian Cancer Cells

Cisplatin is a commonly used chemotherapeutic drug, used for the treatment of malignant ovarian cancer, but acquired resistance limits its application. There is therefore an overwhelming need to understand the mechanism of cisplatin resistance in ovarian cancer, that is, ovarian cancer cells are insensitive to cisplatin treatment. Here, we show that failure of elevating calcium and oxidative stress tolerance play key roles in cisplatin resistance in ovarian cancer cell lines. Cisplatin induces an increase in oxidative stress and alters intracellular Ca(2+) concentration, including cytosolic and mitochondrial Ca(2+) in cisplatin-sensitive SKOV3 cells, but not in cisplatin-resistant SKOV3/DDP cells. Cisplatin induces mitochondrial damage and triggers the mitochondrial apoptotic pathway in cisplatin-sensitive SKOV3 cells, but rarely in cisplatin-resistant SKOV3/DDP cells. Inhibition of calcium signaling attenuates cisplatin-induced oxidative stress and intracellular Ca(2+) overload in cisplatin-sensitive SKOV3 cells. Moreover, in vivo xenograft models of nude mouse, cisplatin significantly reduced the growth rates of tumors originating from SKOV3 cells, but not that of SKOV3/DDP cells. Collectively, our data indicate that failure of calcium up-regulation mediates cisplatin resistance by alleviating oxidative stress in ovarian cancer cells. Our results highlight potential therapeutic strategies to improve cisplatin resistance.

One-step synthesis of silver metallosurfactant as an efficient antibacterial and anticancer material

A silver based double chained metallosurfactant was synthesized and characterized with various analytical methods. Along with the self aggregation behavior, DNA binding abilities of metallomicelles and antimicrobial and anticancer activities were evaluated.

Amphiphilic nanoparticles of resveratrol-norcantharidin to enhance the toxicity in zebrafish embryo

Direct coupling of a hydrophobic drug and a hydrophilic natural product via an ester bond produced an amphiphilic adduct that formed liposomes. Liposomes of resveratrol-norcantharidin adduct are capable of forming a tadpole-like nanoparticle and exhibited high toxicity in zebrafish embryos to give the better transportation and the effective concentration into cells. Using fluorescent chromophore showed the liposome in the stomach and intestinal villi rather than in the skin and muscle. This result may provide an insight into the mechanism of action of traditional Chinese medicines, which often contain a significant amount of flavonoids and polyphenol analogs.

Size-dependent cytotoxicity and genotoxicity of ZnO particles to human lymphoblastoid (WIL2-NS) cells

The relationship between particle size and cytogenotoxicity of ZnO particles was systematically studied in vitro using WIL2-NS human lymphoblastoid cells. Before toxicity measurements, the ZnO particles of three different sizes (26 nm, 78 nm, and 147 nm) were well characterized for their physical and chemical properties to ensure that variations in other properties including surface chemistry and particle shape, which also may influence particle toxicity, were minimal. Cell viability testing showed that increasing cytotoxicity was associated with decreasing particle size. Both the dissolution kinetics of ZnO particles in supplemented cell culture medium and the apparent numbers of ZnO particles internalized by cells were size dependent and showed strong correlation with cytotoxicity. Genotoxicity, as measured by micronucleus formation, was significantly enhanced in the presence of the medium-sized and large-sized particles. The observation that necrosis increased with smaller- sized particles but micronuclei were present to a greater extent with larger- sized particles suggests that different mechanisms of cell damage induction or susceptibilities are operating depending on particle size.

Asymmetric Colloidal Janus Particle Formation Is Core-Size-Dependent

Colloidal particles with asymmetric surface chemistry (Janus particles) have unique bifunctional properties. The size of these particles is an important determinant for their applications in diverse fields from drug delivery to chemical catalysis. The size of Janus particles, with a core surface coated with carboxylate and a partially encapsulating silica shell, depends upon several factors, including the core size and the concentration of carboxylate coating. The role of the carboxylate coating on the Janus particle size is well-understood; however, the role of the core size is not well defined. The role of the carboxylated polystyrene (cPS) core size on the cPS-silica Janus particle morphology (its size and shape) was examined by testing two different silica sizes and five different cPS core sizes. Results from electron microscopy (EM) and dynamic light scattering (DLS) analysis indicate that the composite cPS-silica particle acquires two distinct shapes: (i) when the size of the cPS core is much smaller than the non-cPS silica (b-SiO2) sphere, partially encapsulated Janus particles are formed, and (ii) when the cPS core is larger than or equal to the b-SiO2 sphere, a raspberry-like structure rather than a Janus particle is formed. The cPS-silica Janus particles of ∼100-500 nm size were obtained when the size of the cPS core was much smaller than the non-cPS silica (b-SiO2) sphere. These scalable nanoscale Janus particles will have wide application in a multifunctional delivery platform and catalysis.

Crystallization of Probucol in Nanoparticles Revealed by AFM Analysis in Aqueous Solution

The crystallization behavior of a pharmaceutical drug in nanoparticles was directly evaluated by atomic force microscopy (AFM) force curve measurements in aqueous solution. A ternary spray-dried sample (SPD) was prepared by spray drying the organic solvent containing probucol (PBC), hypromellose (HPMC), and sodium dodecyl sulfate (SDS). The amorphization of PBC in the ternary SPD was confirmed by powder X-ray diffraction (PXRD) and solid-state 13C NMR measurements. A nanosuspension containing quite small particles of 25 nm in size was successfully prepared immediately after dispersion of the ternary SPD into water. Furthermore, solution-state 1H NMR measurements revealed that a portion of HPMC coexisted with PBC as a mixed state in the freshly prepared nanosuspension particles. After storing the nanosuspension at 25 °C, a gradual increase in the size of the nanoparticles was observed, and the particle size changed to 93.9 nm after 7 days. AFM enabled the direct observation of the morphology and agglomeration behavior of the nanoparticles in water. Moreover, AFM force-distance curves were changed from (I) to (IV), depending on the storage period, as follows: (I) complete indentation within an applied force of 1 nN, (II) complete indentation with an applied force of 1-5 nN, (III) partial indentation with an applied force of 5 nN, and (IV) nearly no indentation with an applied force of 5 nN. This stiffness increase of the nanoparticles was attributed to gradual changes in the molecular state of PBC from the amorphous to the crystal state. Solid-state 13C NMR measurements of the freeze-dried samples demonstrated the presence of metastable PBC Form II crystals in the stored nanosuspension, strongly supporting the AFM results.

Plasmin-loaded echogenic liposomes for ultrasound-mediated thrombolysis

Plasmin, a direct fibrinolytic, shows a significantly superior hemostatic safety profile compared to recombinant tissue plasminogen activator (rtPA), the only FDA-approved thrombolytic for the treatment of acute ischemic stroke. The improved safety of plasmin is attributed to the rapid inhibition of free plasmin by endogenous plasmin inhibitors present in very high concentrations (1 μM). However, this rapid inhibition prevents the intravenous (IV) administration of plasmin. In emergency situations, catheter-based local administration is not practical. There is a need for an alternative technique for IV administration of plasmin. A possible solution is the encapsulation of plasmin in echogenic liposomes (ELIP) for protection from inhibitors until ultrasound (US)-triggered release at the clot site. ELIP are bilayer phospholipid vesicles with encapsulated gas microbubbles. US induces oscillation and collapse of the gas bubbles, which facilitates ELIP rupture and delivery of the encapsulated contents. Plasmin-loaded ELIP (PELIP) were manufactured and characterized for size, gas and drug encapsulations, and in vitro thrombolytic efficacy using a human whole blood clot model. Clots were exposed to PELIP with and without exposure to US (center frequency 120 kHz, pulse repetition frequency 1667 Hz, peak-to-peak pressure of 0.35 MPa, 50 % duty cycle). Thrombolytic efficacy was calculated by measuring the change in clot width over a 30-min treatment period using an edge detection MATLAB program. The mean clot lysis obtained with PELIP in the presence of US exposure was 31 % higher than that obtained without US exposure and 15 % higher than that obtained with rtPA treatment (p < 0.05).The enhanced clot lysis is attributed to the US-mediated release of plasmin from the liposomes.

Synthesis of nano-bowls with a Janus template

Colloidal particles with two or more different surface properties (Janus particles) are of interest in catalysis, biological imaging, and drug delivery. Eccentric nanoparticles are a type of Janus particle consisting of a shell that envelops the majority of a core particle, leaving a portion of the core surface exposed. Previous work to synthesize eccentric nanoparticles from silica and polystyrene have only used microemulsion techniques. In contrast we report the sol-gel synthesis of eccentric Janus nanoparticles composed of a silica shell around a carboxylate-modified polystyrene core (Janus templates). In addition, we have synthesized nano-bowl-like structures after the removal of the polystyrene core by organic solvent. These Janus templates and nanobowls can be used as a versatile platform for site-specific functionalization or controlled theranostic delivery.

Nanovesicular carrier-based formulation for skin cancer targeting: evaluation of cytotoxicity, intracellular uptake, and preclinical anticancer activity

CONTEXT

Skin cancer has turned into global epidemic leading to higher incidences among cancer stricken population.

OBJECTIVE

The aim of the present investigation is to evaluate the anticancer potential and intracellular uptake of a novel nanovesicular formulation of 5-FU.

MATERIALS AND METHODS

Detailed intracellular uptake study in conjunction with estimation of intracellular reactive oxygen species was done using skin melanoma cell lines (A375) along with cytotoxicity studies. To further obtain the mechanistic insights into inhibition of tumor cell proliferation, cell-cycle arrest studies were conducted. The preclinical anticancer activity was carried out employing in vivo DMBA-croton oil-induced skin cancer model in mice.

RESULTS AND DISCUSSION

Significant reduction in the number of papillomas was observed in skin cancer-bearing mice on treatment with nanovesicular formulation (51.4 ± 3.2%) in comparison with marketed formulation (21.3 ± 2.1%) of 5-FU. Tumor volume was found to be reduced to 46.3 ± 3.5% with prepared formulation, whereas the marketed formulation-treated group showed the reduction of 18.6 ± 1.8% in comparison with the control (untreated) group.

CONCLUSION

The results of present study demonstrated that nanovesicular formulation of 5-FU possessed the enhanced anticancer activity which could be attributed to better intracellular uptake, cellular retention, and sustained release of drug.

Synthesis and synergetic anti-tumor activity evaluation of dihydroartemisinin-organogermanium(IV) compound

Dihydroartemisinin (DHA), a semi-synthetic derivative of the herb artemisinin, has shown commendable bioactivity. In this paper, a novel dihydroartemisinin-organogermanium (DHA-Ge) compound was synthesized, characterized and its potential anti-tumor activity was evaluated by various methods. MTT results demonstrated that DHA-Ge could effectively inhibit the proliferation of HepG2 cells and showed their dose-dependent properties. The IC50 value of inhibition effect on HepG2 cells of DHA-Ge was 10.23 μg/ml which was lower than 39.44 μg/ml of DHA. Flow cytometric results suggested that DHA-Ge could induce apoptosis of HepG2 cells and the apoptosis rate was 20.26% after 24h treatment with 56.8 μg/ml DHA-Ge concentration. Atomic force microscopy images showed that HepG2 cells were collapsed and the cell nucleus were fragmented after 24h treatment. All these results together showed that the DHA-Ge possessed desirable synergetic enhanced anti-tumor effects and could be developed as a suitable tumor therapeutic agent.

Surface modified multifunctional nanomedicines for simultaneous imaging and therapy of cancer

INTRODUCTION

To date, a growing number of advanced anticancer nanomedicines (e.g., Doxil(®), Lipoxal(®), DepoCyte(®)) have entered into different phases of clinical trials. However, most of these medicaments fail to differentiate between diseased and normal cells. They also do not have capability of real time monitoring of disease status trough on-demand imaging/sensing of target molecule(s). Multifunctional nanomedicines and theranostics can resolve such limitations, while formulation of these advanced seamless systems appear to involve various sophisticated process, exploiting several bioconjugations.

METHODS

Recent works upon multifunctional nanomedicines for simultaneous imaging and therapy of cancer have been systematically reviewed, focusing on surface modification and application of advanced nanobiomaterials.

RESULTS

Ultimate therapy of malignancies, as complex systems, demands implementation of seamless nanosystems (NSs) that can specifically target the cancerous cells and smartly deliver the anticancer agent(s) into the desired target site. Engineering of such NSs requires in-situ coordination of various technologies (e.g., synthesis, surface modification and bioconjugation) in order to achieve improved pharmacokinetics and pharmacodynamics outcomes.

CONCLUSION

Seamless multimodal NSs have potential to simultaneously target and monitor the tumor cells through homing and imaging/sensing devices and deliver the therapeutic agents. However, to achieve superior pharmacokinetics with maximal efficacy and minimal side effects, these advanced NSs need to become much more intelligent to sense the disease condition and liberate therapeutics on demand.

Atomic Force Microscopy and pharmacology: from microbiology to cancerology

BACKGROUND

Atomic Force Microscopy (AFM) has been extensively used to study biological samples. Researchers take advantage of its ability to image living samples to increase our fundamental knowledge (biophysical properties/biochemical behavior) on living cell surface properties, at the nano-scale.

SCOPE OF REVIEW

AFM, in the imaging modes, can probe cells morphological modifications induced by drugs. In the force spectroscopy mode, it is possible to follow the nanomechanical properties of a cell and to probe the mechanical modifications induced by drugs. AFM can be used to map single molecule distribution at the cell surface. We will focus on a collection of results aiming at evaluating the nano-scale effects of drugs, by AFM. Studies on yeast, bacteria and mammal cells will illustrate our discussion. Especially, we will show how AFM can help in getting a better understanding of drug mechanism of action.

MAJOR CONCLUSIONS

This review demonstrates that AFM is a versatile tool, useful in pharmacology. In microbiology, it has been used to study the drugs fighting Candida albicans or Pseudomonas aeruginosa. The major conclusions are a better understanding of the microbes' cell wall and of the drugs mechanism of action. In cancerology, AFM has been used to explore the effects of cytotoxic drugs or as an innovative diagnostic technology. AFM has provided original results on cultured cells, cells extracted from patient and directly on patient biopsies.

GENERAL SIGNIFICANCE

This review enhances the interest of AFM technologies for pharmacology. The applications reviewed range from microbiology to cancerology.

Sirolimus encapsulated liposomes for cancer therapy: physicochemical and mechanical characterization of sirolimus distribution within liposome bilayers

Sirolimus has recently been introduced as a therapeutic agent for breast and prostate cancer. In the current study, conventional and Stealth liposomes were used as carriers for the encapsulation of sirolimus. The physicochemical characteristics of the sirolimus liposome nanoparticles were investigated including the particle size, zeta potential, stability and membrane integrity. In addition atomic force microscopy was used to study the morphology, surface roughness and mechanical properties such as elastic modulus deformation and deformation. Sirolimus encapsulation in Stealth liposomes showed a high degree of deformation and lower packing density especially for dipalmitoyl-phosphatidylcholine (DPPC) Stealth liposomes compared to unloaded. Similar results were obtained by differential scanning calorimetry (DSC) studies; sirolimus loaded liposomes were found to result in a distorted state of the bilayer. X-ray photon electron (XPS) analysis revealed a uniform distribution of sirolimus in multilamellar DPPC Stealth liposomes compared to a nonuniform, greater outer layer lamellar distribution in distearoylphosphatidylcholine (DSPC) Stealth liposomes.

Microfluidic synthesis of PEG- and folate-conjugated liposomes for one-step formation of targeted stealth nanocarriers

PURPOSE

A microfluidic hydrodynamic flow focusing technique enabling the formation of small and nearly monodisperse liposomes is investigated for continuous-flow synthesis of poly(ethylene glycol) (PEG)-modified and PEG-folate-functionalized liposomes for targeted drug delivery.

METHODS

Controlled laminar flow in thermoplastic microfluidic devices facilitated liposome self-assembly from initial lipid compositions including lipid/cholesterol mixtures containing PEG-lipid and folate-PEG-lipid conjugates. Relationships among flow conditions, lipid composition, and liposome size were evaluated; their impact on PEG and folate incorporation were determined through a combination of UV-vis absorbance measurements and characterization of liposome zeta potential.

RESULTS

PEG and folate were successfully incorporated into microfluidic-synthesized liposomes over the full range of liposome sizes studied. Efficiency of PEG-lipid incorporation was inversely correlated with liposome diameter. Folate-lipid was effectively integrated into liposomes at various flow conditions.

CONCLUSIONS

Liposomes incorporating relatively large PEG-modified and folate-PEG-modified lipids were successfully synthesized using the microfluidic flow focusing platform, providing a simple, low cost, rapid method for preparing functionalized liposomes. Relationships between preparation conditions and PEG or folate-PEG functionalization have been elucidated, providing insight into the process and defining paths for optimization of the microfluidic method toward the formation of functionalized liposomes for pharmaceutical applications.