Photochemical control of molecular assembly formation in a catanionic surfactant system

Light and pH responsive catanionic vesicles based on a chalcone/flavylium photoswitch for smart drug delivery: From molecular design to the controlled release of doxorubicin

Spatially and temporally localized delivery is a promising strategy to circumvent adverse effects of traditional drug therapy such as drug toxicity and prolonged treatments. Stimuli-responsive colloidal nanocarriers can be crucial to attain such goals. Here, we develop a delivery system based on dual light and pH responsive vesicles having a cationic bis-quat gemini surfactant, 12-2-12, and a negatively charged amphiphilic chalcone, C4SCh. The premise is to exploit the chalcone/flavylium interconversion to elicit a morphological change of the vesicles leading to the controlled release of an encapsulated drug. First, the phase behavior of the catanionic system is studied and the desirable composition yielding stable unilamellar vesicles identified and selected for further studies. The solutions containing vesicles (Dh ≈ 200 nm, ζ-potential ≈ 80 mV) are in-depth characterized by light microscopy, cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS) and surface tension measurements. Upon subjecting the vesicles to UV irradiation (λ = 365 nm) at near neutral pH (≈ 6.0), no morphological effects are observed, yet when irradiation is coupled with pH = 3.0, the majority of the vesicles are disrupted into bilayer fragments. The anticancer drug doxorubicin (DOX) is successfully entrapped in the non-irradiated vesicles, yielding an encapsulation efficiency of ≈ 25% and a loading capacity of ≈ 3%. The release profile of the drug-loaded vesicles is then studied in vitro in four conditions: i) no stimuli (pH = 6.0); ii) irradiation, pH = 6.0; iii) no irradiation and adjusted pH = 3.0; iv) irradiation and adjusted pH = 3.0 Crucially, irradiation at pH = 3.0 leads to a sustained release of DOX to ca. 80% (within 4 h), whereas cases i) and ii) lead to only ≈ 25 % release and case iii) to 50% release but precipitation of the vesicles. Thus, our initial hypothesis is confirmed: we present a proof of concept delivery system where light and pH act as inputs of an AND logic gate mechanism for the controlled release of a relevant biomedical drug (output). This may prove useful if the irradiated nanocarriers meet acidified physiological environments such as tumors sites, endosomes or lysosomes.

Inner and Interfacial Environmental Nanoarchitectonics of Supramolecular Assemblies Formed by Amphiphiles: from Emergence to Application

The inner and interfacial environments of self-assemblies provide fascinating nano-space for selective and efficient chemical reactions and processes. In biological systems, various chemical reactions, molecular recognition, and transport occur precisely and selectively by virtue of effective molecular interactions on biological membranes and proteins. Considering these advantages and the concept of nanoarchitectonics, we demonstrated that the photochromism of a lophine dimer was accelerated by using confined nano-spaces formed by surfactant micelles. The photoresponsive micelles were used for the rapid controlled release of a model drug upon ultraviolet light irradiation. Furthermore, selective ion recognition inside the self-assembled molecular films at the interfaces was investigated. The anion-π interaction between the anion and an electron-deficient aromatic ring was evaluated on a solid substrate modified with a naphthalenediimide (NDI) analog. Force curve measurements afforded a quantitative analysis of anion-π interactions on the NDI film. The strength of anion-π interactions is regulated by the electric fields on the electrode. An optical probe was developed to visualize the distribution of Cs ions in the soil, plant bodies, and aqueous media using an optode system. Advances in the development of molecular functional systems are expected based not only on molecular structures but also on the spaces and environments produced by them.

Properties and Applications of Highly Stable Vesicles Formed by Nanoarchitectonics of Amphiphilic Molecules

Vesicles (liposomes and niosomes) are bilayer membranous capsules composed of amphiphilic molecules having aqueous phase in their interior and can encapsulate drug ingredients to act as drug delivery systems, a bio-membrane model, and so on. Vesicles also find their applications in cosmetics and foods industries since they can not only entrap water-soluble substances in their core, but also solubilize oily substances in the bilayer membrane. Almost half a century has passed since the discovery of vesicles by Bangham, and research on their basic properties and applications has been gaining momentum once again. In this article, the preparation and properties of vesicles (liposomes, niosomes) with excellent dispersion stability, especially formed in mixtures of amphiphilic molecules, are reported. Furthermore, the preparation of nano-sized silica hollow particles using vesicles as a structure-directing agent and their application to anti-reflection film are also described.

Rosado I, Balestra FR, Huertas P, Rodik RV, Kalchenko VI, Bernal E, Moyá ML, López-Cornejo P, Ostos FJ. Multivalent Calixarene-Based Liposomes as Platforms for Gene and Drug Delivery

The formation of calixarene-based liposomes was investigated, and the characterization of these nanostructures was carried out using several techniques. Four amphiphilic calixarenes were used. The length of the hydrophobic chains attached to the lower rim as well as the nature of the polar group present in the upper rim of the calixarenes were varied. The lipid bilayer was formed with one calixarene and with the phospholipid 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine, DOPE. The cytotoxicity of the liposomes for various cell lines was also studied. From the results obtained, the liposomes formed with the least cytotoxic calixarene, (TEAC₁₂)₄, were used as nanocarriers of both nucleic acids and the antineoplastic drug doxorubicin, DOX. Results showed that (TEAC₁₂)₄/DOPE/p-EGFP-C1 lipoplexes, of a given composition, can transfect the genetic material, although the transfection efficiency substantially increases in the presence of an additional amount of DOPE as coadjuvant. On the other hand, the (TEAC₁₂)₄/DOPE liposomes present a high doxorubicin encapsulation efficiency, and a slow controlled release, which could diminish the side effects of the drug.

Rapid controlled release by photo-irradiation using morphological changes in micelles formed by amphiphilic lophine dimers

Photo-induced rapid control of molecular assemblies, such as micelles and vesicles, enables effective and on-demand release of drugs or active components, with applications such as drug delivery systems (DDS) and cosmetics. Thus far, no attempts to optimize the responsiveness of photoresponsive molecular assemblies have been published. We previously reported photoresponsive surfactants bearing a lophine dimer moiety that exhibit fast photochromism in confined spaces, such as inside a molecular assembly. However, rapid control of the micelle structures and solubilization capacity have not yet been demonstrated. In the present work, photo-induced morphological changes in micelles were monitored using in-situ small-angle neutron scattering (SANS) and UV/Vis absorption spectroscopy. An amphiphilic lophine dimer (3TEG-LPD) formed elliptical micelles. These were rapidly elongated by ultraviolet light irradiation, which could be reversed by dark treatment, both within 60 s. For a solution of 3TEG-LPD micelles solubilizing calcein as a model drug molecule, fluorescence and SANS measurements indicated rapid release of the incorporated calcein into the bulk solvent under UV irradiation. Building on these results, we investigated rapid controlled release via hierarchical chemical processes: photoisomerization, morphological changes in the micelles, and drug release. This rapid controlled release system allows for effective and on-demand DDS.

Synthesis and surface activity of photoresponsive hybrid surfactants containing both fluorocarbon and hydrocarbon chains

HYPOTHESIS

Hybrid surfactants containing both alkyl and fluoroalkyl chains within the same molecule where modification of the azobenzene group will enable us to switch the superhydrophobic nature with an external light source, and the optical behavior will vary depending on the structure of the hydrophobic chains.

EXPERIMENTS

Surface activity and its optically-induced variation of the azobenzene-modified hybrid surfactants were characterized using the surface tensiometry, UV-vis and NMR spectroscopy and theoretical calculation.

FINDINGS

The hybrid surfactants are superhydrophobic in nature reducing the surface tension of water to near 20 mN/m. Photo-isomerization of the azobenzene group induces a drastic surface tension variation (Δγ), and particularly the compositions containing the octyl-fluorocarbon chain exhibit remarkable Δγ as much as 30 mN/m which is even higher than that of the conventional surfactants (Δγ ≈ 14-20 mN/m). Theoretical calculation suggests significantly higher hydrophilicity of the cis isomer, causing the drastic switch in the surface activity. These results indicate the promise of the hybrid surfactants as efficient surface/interface manipulators.

Photoinduced viscosity control of lecithin-based reverse wormlike micellar systems using azobenzene derivatives

This report describes the controlled viscosity changes of photoresponsive reverse wormlike micellar systems formed by soybean lecithin (SoyPC), d-ribose, and azobenzene derivatives in decane.

Light induced micelle to vesicle transition in an aqueous solution of a surface active ionic liquid

A new simple surface active ionic liquid displayed reversible micelle–vesicle transition under alternative UV/vis irradiation without additives.

Light-induced structural evolution of photoswitchable carbohydrate-based surfactant micelles

We report the light-induced structural evolution of photoswitchable carbohydrate-based surfactant micelles using time-resolved small-angle neutron scattering (TR-SANS), monitoring the structural changes in micellisation in situ over time and demonstrating for the first time the course and implications of this process.

Light-controlled formation of vesicles and supramolecular organogels by a cholesterol-bearing amphiphilic molecular switch

A new responsive material composed of an amphiphilic light-switchable dithienylethene unit functionalized with a hydrophobic cholesterol unit and a hydrophilic poly(ethylene glycol)-modified pyridinium group has been designed. This unique single-molecule system shows responsive light-switchable self-assembly in both water and organic solvents. Light-triggered reversible vesicle formation in aqueous solutions is reported. The molecule shows a different behavior in apolar aromatic solvents, in which light-controlled formation of organogel fibers is observed. The light-triggered aggregation behavior of this molecule demonstrates that control of a supramolecular structure with light can be achieved in both aqueous and organic media and that this ability can be present in a single molecule. This opens the way toward the effective development of new strategies in soft nanotechnology for applications in controlled chemical release systems.

Photoinduced demulsification of emulsions using a photoresponsive gemini surfactant

This Article reports on the influence of light irradiation on the stability of emulsions prepared using a photoresponsive gemini surfactant (C7-azo-C7) having an azobenzene skeleton as a spacer. When mixtures of trans C7-azo-C7 aqueous solution and n-octane are homogenized, stable emulsions are obtained in a specific region of weight fraction and surfactant concentration. Fluorescence microscopy observations using a small amount of fluorescent probes show that the stable emulsions are oil-in-water (O/W)-type. UV irradiation of stable O/W emulsions promotes the cis isomerization of trans C7-azo-C7 and leads to the coalescence of the oil (octane) droplets in the emulsions, that is, demulsification. While the equilibrated interfacial tension (IFT) between aqueous trans C7-azo-C7 solution and octane is almost the same as that between aqueous cis C7-azo-C7 and octane, the occupied area per molecule for C7-azo-C7 at octane/water interface decreases with the cis photoisomerization of trans isomer. Dynamic IFT measurement shows that UV irradiation to the interface between aqueous trans C7-azo-C7 solution and octane brings about an increase in the interfacial tension, indicating that the Gibbs free energy at the interface increases. From these results, the cis isomerization of trans C7-azo-C7 molecules at the O/W interface due to UV irradiation leads to direct contact between the water and octane phases, because of the reduction of molecular area at the interface, and subsequently makes the emulsions demulsified.

Incorporation of amphiphilic cyclodextrins into liposomes as artificial receptor units

In this article, we describe the introduction of amphiphilic β-cyclodextrins into liposomes to act as artificial receptor units. Using dynamic light scattering, dye encapsulation, and cryogenic transmission electron microscopy, we show that amphiphilic β-cyclodextrins can be mixed in any proportion with a typical mixture of phospholipids and cholesterol to provide stable, spherical, and unilamellar mixed vesicles. It is also possible to form giant unilamellar vesicles with mixtures of lipids and cyclodextrin. The permeability of the mixed vesicles increases with the percentage of cyclodextrin. The cyclodextrins can act as host molecules for hydrophobic guest molecules, even when they are dispersed at a low percentage in the vesicle membrane. It is shown that mixed vesicles can be decorated with carbohydrate-functionalized guest molecules, with photoresponsive guest molecules, and with dye-functionalized guest molecules. Taken together, it is demonstrated that the host-guest chemistry of amphiphilic cyclodextrins is fully compatible with a liposomal bilayer membrane and the advantages of each can be combined to give superior nanocontainers.

Photoreversible micellar solution as a smart drag-reducing fluid for use in district heating/cooling systems

A photoresponsive micellar solution is developed as a promising working fluid for district heating/cooling systems (DHCs). It can be reversibly switched between a drag reduction (DR) mode and an efficient heat transfer (EHT) mode by light irradiation. The DR mode is advantageous during fluid transport, and the EHT mode is favored when the fluid passes through heat exchangers. This smart fluid is an aqueous solution of cationic surfactant oleyl bis(2-hydroxyethyl)methyl ammonium chloride (OHAC, 3.4 mM) and the sodium salt of 4-phenylazo benzoic acid (ACA, 2 mM). Initially, ACA is in a trans configuration and the OHAC/ACA solution is viscoelastic and exhibits DR (of up to 80% relative to pure water). At the same time, this solution is not effective for heat transfer. Upon UV irradiation, trans-ACA is converted to cis-ACA, and in turn, the solution is converted to its EHT mode (i.e., it loses its viscoelasticity and DR) but it now has a heat-transfer capability comparable to that of water. Subsequent irradiation with visible light reverts the fluid to its viscoelastic DR mode. The above property changes are connected to photoinduced changes in the nanostructure of the fluid. In the DR mode, the OHAC/trans-ACA molecules assemble into long threadlike micelles that impart viscoelasticity and DR capability to the fluid. Conversely, in the EHT mode the mixture of OHAC and cis-ACA forms much shorter cylindrical micelles that contribute to negligible viscoelasticity and effective heat transfer. These nanostructural changes are confirmed by cryo-transmission electron microscopy (cryo-TEM), and the photoisomerization of trans-ACA and cis-ACA is verified by (1)H NMR.

Light responsive polymer membranes: a review

In recent years, stimuli responsive materials have gained significant attention in membrane separation processes due to their ability to change specific properties in response to small external stimuli, such as light, pH, temperature, ionic strength, pressure, magnetic field, antigen, chemical composition, and so on. In this review, we briefly report recent progresses in light-driven materials and membranes. Photo-switching mechanisms, valved-membrane fabrication and light-driven properties are examined. Advances and perspectives of light responsive polymer membranes in biotechnology, chemistry and biology areas are discussed.

Photofoams: remote control of foam destabilization by exposure to light using an azobenzene surfactant

We report evidence for photocontrolled stability and breakage of aqueous foams made from solutions of a cationic azobenzene-containing surfactant over a wide range of concentrations. Exposure to UV or visible lights results in shape and polarity switches in the surfactant molecule, which in turn affects several properties including critical micelle concentration, equilibrium surface tension, and the air-water interfacial composition (cis isomers are displaced by trans ones). We demonstrate that the trans isomer stabilizes foams, whereas the cis isomer forms unstable foams, a property that does not correlate with effects of light on surface tension, nor with total surfactant concentration. Achieving in situ breakage of foam is accordingly ascribed to the remote control of the dynamics of adsorption/desorption of the surfactant, accompanied by gradients of concentrations out of equilibrium. Photomodulation of adsorption kinetics and/or diffusion dynamics on interfaces is reached here by a noninvasive clean trigger, bringing a new tool for the study of foams.

pH-Sensitive self-propelled motion of oil droplets in the presence of cationic surfactants containing hydrolyzable ester linkages

Self-propelled oil droplets in a nonequilibrium system have drawn much attention as both a primitive type of inanimate chemical machinery and a dynamic model of the origin of life. Here, to create the pH-sensitive self-propelled motion of oil droplets, we synthesized cationic surfactants containing hydrolyzable ester linkages. We found that n-heptyloxybenzaldehyde oil droplets were self-propelled in the presence of ester-containing cationic surfactant. In basic solution prepared with sodium hydroxide, oil droplets moved as molecular aggregates formed on their surface. Moreover, the self-propelled motion in the presence of the hydrolyzable cationic surfactant lasted longer than that in the presence of nonhydrolyzable cationic surfactant. This is probably due to the production of a fatty acid by the hydrolysis of the ester-containing cationic surfactant and the subsequent neutralization of the fatty acid with sodium hydroxide. A complex surfactant was formed in the aqueous solution because of the cation and anion combination. Because such complex formation can induce both a decrease in the interfacial tension of the oil droplet and self-assembly with n-heptyloxybenzaldehyde and lauric acid in the aqueous dispersion, the prolonged movement of the oil droplet may be explained by the increase in heterogeneity of the interfacial tension of the oil droplet triggered by the hydrolysis of the ester-containing surfactant.