Voltage-induced swelling and deswelling of weak polybase brushes

Nanoparticles insertion and dimerization in polymer brushes

Molecular dynamics simulations are conducted to systematically investigate the insertion of spherical nanoparticles (NPs) in polymer brushes as a function of their size, strength of their interaction with the polymers, polymer grafting density, and polymer chain length. For attractive interactions between the NPs and the polymers, the depth of NPs' penetration in the brush results from a competition between the enthalpic gain due to the favorable polymer-NP interaction and the effect of osmotic pressure resulting from displaced polymers by the NP's volume. A large number of simulations show that the average depth of the NPs increases by increasing the strength of the interaction strength. However, it decreases by increasing the NPs' diameter or increasing the polymer grafting density. While the NPs' effect on the polymer density is local, their effect on their conformations is long-ranged and extends laterally over length scales larger than the NP's size. This effect is manifested by the emergence of laterally damped oscillations in the normal component of the chains' radius of gyration. Interestingly, we found that for high enough interaction strength, two NPs dimerize in the polymer brush. The dimer is parallel to the substrate if the NPs' depth in the brush is shallow. However, the dimer is perpendicular to the substrate if the NPs' are deep in the brush. These results imply that polymer brushes can be used as a tool to localize and self-assemble NPs in polymer brushes.

Electrical Chain Rearrangement: What Happens When Polymers in Brushes Have a Charge Gradient?

Under the influence of electric fields, the chains in polyelectrolyte brushes can stretch and collapse, which changes the structure of the brush. Copolymer brushes with charged and uncharged monomers display a similar behavior. For pure polyelectrolyte and random copolymer brushes, the field-induced structure changes only the density of the brush and not its local composition, while the latter could be affected if charges are distributed inhomogeneously along the polymer backbone. Therefore, we systematically study the switching behavior of gradient polyelectrolyte brushes in electric fields for different solvent qualities, grafting densities, and charges per chain via coarse-grained molecular dynamics simulations. Similar to random copolymers and pure polyelectrolytes, these brushes show a mixed-phase transition: intermediate states between fully stretched and collapsed are characterized by a bimodal chain-end distribution. Additionally, we find that the total charge of the brush plays a key role in the critical field required for a complete transition. Finally, we find that gradient polyelectrolyte brushes are charge-enriched at the brush-solvent interface under stretched conditions and charge-depleted under collapsed conditions, allowing for control over the local composition and thus the surface charge of the brush due to the inhomogeneous charge along the grafted chains.

Polyelectrolyte Brushes with Protein-Like Nanocolloids

Electrostatic interaction of ampholytic nanocolloidal particles (NPs), which mimic globular proteins, with polyelectrolyte brushes is analyzed within mean-field Poisson-Boltzmann approximation. In accordance with experimental findings, the theory predicts that an electrostatic driving force for the particle uptake by the brush may emerge when the net charge of the particle in the buffer and the charge of the brush are of the same sign. The origin of this driving force is change in the ionization state of weak cationic and anionic groups on the NP surface provoked by interaction with the brush. In experimental systems, the ionic interactions are complemented by excluded-volume, hydrophobic, and other types of interactions that all together control NP uptake by or expulsion from the brush. Here, we focus on the NP-brush ionic interactions. It is demonstrated that deviation between the buffer pH and the NP isoelectric point, considered usually as the key control parameter, does not uniquely determine the insertion free energy patterns. The latter depends also on the proportion of cationic and anionic groups in the NPs and their specific ionization constants as well as on salt concentration in the buffer. The analysis of the free energy landscape proves that a local minimum in the free energy inside the brush appears, provided the NP charge reversal occurs upon insertion into the brush. This minimum corresponds either to a thermodynamically stable or to a metastable state, depending on the pH offset from the IEP and salt concentration, and is separated from the bulk of the solution by a free energy barrier. The latter, being fairly independent of salt concentration in height, may strongly impede the NP absorption kinetically even when it is thermodynamically favorable. Hence, change reversal is a necessary but insufficient condition for the uptake of the NPs by similarly charged polyelectrolyte brushes.

Electroresponse of weak polyelectrolyte brushes

End-tethered polyelectrolytes are widely used to modify substrate properties, particularly for lubrication or wetting. External stimuli, such as pH, salt concentration, or an electric field, can induce profound structural responses in weak polyelectrolyte brushes, which can be utilized to further tune substrate properties. We study the structure and electroresponsiveness of weak polyacid brushes using an inhomogeneous theory that incorporates both electrostatic and chain connectivity correlations at the Debye-Hückel level. Our calculation shows that a weak polyacid brush swells under the application of a negative applied potential, in agreement with recent experimental observation. We rationalize this behavior using a scaling argument that accounts for the effect of the surface charge. We also show that the swelling behavior has a direct influence on the differential capacitance, which can be modulated by the solvent quality, pH, and salt concentration.

Weak polyelectrolyte brushes

I review experimental developments in the growth and application of surface-grafted weak polyelectrolytes (brushes), concentrating on their surface, tribological, and adhesive and bioadhesive properties, and their role as actuators.

Polyelectrolytes as Building Blocks for Next-Generation Membranes with Advanced Functionalities

The global society is in a transition, where dealing with climate change and water scarcity are important challenges. More efficient separations of chemical species are essential to reduce energy consumption and to provide more reliable access to clean water. Here, membranes with advanced functionalities that go beyond standard separation properties can play a key role. This includes relevant functionalities, such as stimuli-responsiveness, fouling control, stability, specific selectivity, sustainability, and antimicrobial activity. Polyelectrolytes and their complexes are an especially promising system to provide advanced membrane functionalities. Here, we have reviewed recent work where advanced membrane properties stem directly from the material properties provided by polyelectrolytes. This work highlights the versatility of polyelectrolyte-based membrane modifications, where polyelectrolytes are not only applied as single layers, including brushes, but also as more complex polyelectrolyte multilayers on both porous membrane supports and dense membranes. Moreover, free-standing membranes can also be produced completely from aqueous polyelectrolyte solutions allowing much more sustainable approaches to membrane fabrication. The Review demonstrates the promise that polyelectrolytes and their complexes hold for next-generation membranes with advanced properties, while it also provides a clear outlook on the future of this promising field.

Electroresponsive Polyelectrolyte Brushes Studied by Self-Consistent Field Theory

End-grafting of polyelectrolyte chains to conducting substrates offers an opportunity to fabricate electro-responsive surfaces capable of changing their physical/chemical properties (adhesion, wettability) in response to applied electrical voltage. We use a self-consistent field numerical approach to compare the equilibrium properties of tethered strong and weak (pH-sensitive) polyelectrolytes to applied electrical field in both salt-free and salt-containing solutions. We demonstrate that both strong and weak polyelectrolyte brushes exhibit segregation of polyions in two populations if the surface is oppositely charged with respect to the brush. This segregation gives rise to complex patterns in the dependence of the brush thickness on salt concentration. We demonstrate that adjustable ionization of weak polyelectrolytes weakens their conformational response in terms of the dependence of brush thickness on the amplitude of the applied voltage.

Simulations of 3-arm polyelectrolyte star brushes under external electric fields

Langevin dynamics (LD) simulations have been performed to study the conformations and stratification of grafted three-arm polyelectrolyte (PE) stars in response to external electric fields. The grafted chains with neutral stems and fully charged branches were immersed in a salt-free solution sandwiched between the grafting electrode and a second oppositely charged electrode. The branching points of neutral-stem PE brushes at low grafting densities exhibit a bimodal distribution normal to the grafting electrode. With increasing grafting density, the molecular conformations in the brush layer become more complex with the emergence of multi-mode distributions of the branching point monomers. Under strong electric fields, the fraction of grafted chains with either nearly completely stretched stems or collapsed branches onto the grafting electrode gradually decreases with increasing grafting density due to the stronger electrostatic screening from counterions and monomer charges at higher grafting densities. Simulation results revealed that a collapsing electric field promotes the stratification within the brush layer, leading to high degrees of charge overcompensation from charged monomers collapsed onto the oppositely charged grafting electrode. An approximate analytical self-consistent field model was developed to examine the stratification within the brush layer. Regarding the fraction of grafted chains with the free branches in the upper layer, the prediction of the analytical model qualitatively agrees with the simulation results.

Response of a Permanently Charged Polyelectrolyte Brush to External Ions: The Aspects of Structure and Dynamics

Structure and dynamics inside permanently charged polyelectrolyte brushes, sodium polystyrene sulfonate brushes, during their response to the introduction of external ions (NaCl) are investigated by neutron reflectivity and dielectric spectroscopy. Neutron reflectivity measurements show that the segmental density of the inner part of the brushes decreases and that of the outer part increases when the salt level is tuned from the salt-free condition to a moderate level (<10^-2 M)-the brushes swell further compared with the salt-free condition. This is attributed to the breakup of the multiplets formed by dipole-dipole pairs, and by this process, the previously constrained chain segments by the multiplets are released. Dielectric spectroscopy discovers a giant dipole by the charge separation of the adsorbed counterions and the PSS^- chains, induced by electric field. The dynamics of the induced giant dipole is accelerated with the increase of external salt, as a result of the charge regularization by elevated salt level. At high-enough salt level, the screening effect reduces the electrostatic repulsion between the neighboring chains and makes the brushes shrink.

Polymers and biopolymers at interfaces

This review updates recent progress in the understanding of the behaviour of polymers at surfaces and interfaces, highlighting examples in the areas of wetting, dewetting, crystallization, and 'smart' materials. Recent developments in analysis tools have yielded a large increase in the study of biological systems, and some of these will also be discussed, focussing on areas where surfaces are important. These areas include molecular binding events and protein adsorption as well as the mapping of the surfaces of cells. Important techniques commonly used for the analysis of surfaces and interfaces are discussed separately to aid the understanding of their application.

Layer-By-Layer Self-Assembly of Polyelectrolytic Block Copolymer Worms on a Planar Substrate

Cationic and anionic block copolymer worms are prepared by polymerization-induced self-assembly via reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion copolymerization of 2-hydroxypropyl methacrylate and glycidyl methacrylate (GlyMA), using a binary mixture of a nonionic poly(ethylene oxide) macromolecular RAFT agent and either a cationic poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride) or an anionic poly(potassium 3-sulfopropyl methacrylate) macromolecular RAFT agent. In each case, covalent stabilization of the worm cores was achieved via reaction of the epoxide groups on the GlyMA repeat units with 3-mercaptopropyltriethoxysilane. Aqueous electrophoresis studies indicated a pH-independent mean zeta potential of +40 mV and -39 mV for the cationic and anionic copolymer worms, respectively. These worms are expected to mimic the rigid rod behavior of water-soluble polyelectrolyte chains in the absence of added salt. The kinetics of adsorption of the cationic worms onto a planar anionic silicon wafer was examined at pH 5 and was found to be extremely fast at 1.0 w/w % copolymer concentration in the absence of added salt. Scanning electron microscopy (SEM) analysis indicated that a relatively constant worm surface coverage of 16% was achieved at 20 °C for adsorption times ranging from just 2 s up to 2 min. Furthermore, the successive layer-by-layer deposition of cationic and anionic copolymer worms onto planar surfaces was investigated using SEM, ellipsometry, and surface zeta potential measurements. These techniques confirmed that the deposition of oppositely charged worms resulted in a monotonic increase in the mean layer thickness, with a concomitant surface charge reversal occurring on addition of each new worm layer. Unexpectedly, two distinct linear regimes were observed when plotting the mean layer thickness against the total number of adsorbed worm layers, with a steeper gradient (corresponding to thicker layers) being observed after the deposition of six worm layers.

Electrowetting of Weak Polyelectrolyte-Coated Surfaces

Polymer coatings are commonly used to modify interfacial properties like wettability, lubrication, or biocompatibility. These properties are determined by the conformation of polymer molecules at the interface. Polyelectrolytes are convenient elementary bricks to build smart materials, given that polyion chain conformation is very sensitive to different environmental variables. Here we discuss the effect of an applied electric field on the properties of surfaces coated with poly(acrylic acid) brushes. By combining atomic force microscopy, quartz crystal microbalance, and contact angle experiments, we show that it is possible to precisely tune polyion chain conformation, surface adhesion, and surface wettability using very low applied voltages if the polymer grafting density and environmental conditions (pH and ionic strength) are properly formulated. Our results indicate that the effective ionization degree of the grafted weak polyacid can be finely controlled with the externally applied field, with important consequences for the macroscopic surface properties.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Single-chain-in-mean-field simulations of weak polyelectrolyte brushes

Structural properties of brushes which are composed of weak acidic and basic polyelectrolytes are studied in the framework of a particle-based approach that implicitly accounts for the solvent quality. Using a semi-grandcanonical partition function in the framework of the Single-Chain-in-Mean-Field (SCMF) algorithm, the weak polyelectrolyte is conceived as a supramolecular mixture of polymers in different dissociation states, which are explicitly treated in the partition function and sampled by the SCMF procedure. One obtains a local expression for the equilibrium acid-base reaction responsible for the regulation of the charged groups that is also incorporated to the SCMF sampling. Coupled to a simultaneous treatment of the electrostatics, the approach is shown to capture the main features of weak polyelectrolyte brushes as a function of the bulk pH in the solution, the salt concentration, and the grafting density. Results are compared to experimental and theoretical works from the literature using coarse-grained representations of poly(acrylic acid) (PAA) and poly(2-vinyl pyridine) (P2VP) polymer-based brushes. As the Born self-energy of ions can be straightforwardly included in the numerical approach, we also study its effect on the local charge regulation mechanism of the brush. We find that its effect becomes significant when the brush is dense and exposed to high salt concentrations. The numerical methodology is then applied (1) to the study of the kinetics of collapse/swelling of a P2VP brush and (2) to the ability of an applied voltage to induce collapse/swelling of a PAA brush in a pH range close to the pK_a value of the polymer.

Poly(N,N-dimethylaminoethyl methacrylate) Brushes: pH-Dependent Switching Kinetics of a Surface-Grafted Thermoresponsive Polyelectrolyte

The temperature-dependent switching behavior of poly(N,N-dimethylaminoethyl methacrylate) brushes in alkaline, neutral, and acidic solutions is examined. A novel microscopic laser temperature-jump technique is employed in order to study characteristic thermodynamic and kinetic parameters. Static laser micromanipulation experiments allow one to determine the temperature-dependent variation of the swelling ratio. The data reveal a strong shift of the volume phase transition of the polymer brushes to higher temperatures when going from pH = 10 to pH = 4. Dynamic laser micromanipulation experiments offer a temporal resolution on a submillisecond time scale and provide a means to determine the intrinsic rate constants. Both the swelling and the deswelling rates strongly decrease in acidic solutions. Complementary experiments using in situ atomic force microscopy show an increased polymer layer thickness at these conditions. The data are discussed on the basis of pH-dependent structural changes of the polymer brushes including protonation of the amine groups and conformational rearrangements. Generally, repulsive electrostatic interactions and steric effects are assumed to hamper and slow down temperature-induced switching in acidic solutions. This imposes significant restrictions for smart polymer surfaces, sensors, and devices requiring fast response times.

Supramolecular Magnetic Brushes: The Impact of Dipolar Interactions on the Equilibrium Structure

The equilibrium structure of supramolecular magnetic filament brushes is analyzed at two different scales. First, we study the density and height distributions for brushes with various grafting densities and chain lengths. We use Langevin dynamics simulations with a bead–spring model that takes into account the cross-links between the surface of the ferromagnetic particles, whose magnetization is characterized by a point dipole. Magnetic filament brushes are shown to be more compact near the substrate than nonmagnetic ones, with a bimodal height distribution for large grafting densities. This latter feature makes them also different from brushes with electric dipoles. Next, in order to explain the observed behavior at the filament scale, we introduce a graph theory analysis to elucidate for the first time the structure of the brush at the scale of individual beads. It turns out that, in contrast to nonmagnetic brushes, in which the internal structure is determined by random density fluctuations, magnetic forces introduce a certain order in the system. Because of their highly directional nature, magnetic dipolar interactions prevent some of the random connections to be formed. On the other hand, they favor a higher connectivity of the chains’ free and grafted ends. We show that this complex dipolar brush microstructure has a strong impact on the magnetic response of the brush, as any weak applied field has to compete with the dipole–dipole interactions within the crowded environment.

pH- and Electro-Responsive Properties of Poly(acrylic acid) and Poly(acrylic acid)-block-poly(acrylic acid-grad-styrene) Brushes Studied by Quartz Crystal Microbalance with Dissipation Monitoring

We report on the synthesis of novel pH- and electro-responsive polyelectrolyte brushes from a gold substrate by direct one-step nitroxide-mediated polymerization of acrylic acid (AA) or copolymerization of AA and styrene (S). In the latter case, amphiphilic brushes of block-gradient copolymers PAA-b-(PAA-grad-PS) comprising one PAA block and one block with the gradient sequence of AA and S were obtained. The block-gradient copolymers are initiated from the surface by the start of the PAA block. The brushes were characterized by XPS and ellipsometry. (1)H NMR confirmed the gradient sequence of the PAA-grad-PS copolymer block. The pH- and electro-responsive properties of the brushes were studied by quartz crystal microbalance with dissipation monitoring (QCM-D) in combination with electrochemistry. This method provides evidence of swelling of the PAA brushes proportional to the contour length of the chains at elevated pH, whereas the response functions of the block-gradient copolymers are more complex and point to intermolecular aggregation in the brush at low pH. Monitoring of the changes in resonance frequency and dissipation of the QCM-D also demonstrates that application of negative voltage to the substrate leads to swelling of the brush; application of a positive voltage provokes only a transient collapse of the brush in proportion to the applied voltage.

Mode of lysozyme protein adsorption at end-tethered polyethylene oxide brushes on gold surfaces determined by neutron reflectivity

The mode of lysozyme protein adsorption at end-tethered thiol-terminated polyethylene oxide brushes grafted upon gold was determined in situ by neutron reflectivity using the INTER instrument at target station 2, ISIS, RAL, UK. It was found that the most probable position of protein adsorption at these weakly protein resistive brushes was at the gold-brush interface in the so-called primary protein position.

Numerical study of weak polybase brushes grafted on neutral or charged spherical surface by the self-consistent field theory

The self-consistent field theory (SCFT) is employed to numerically study the response of weak polybase type polymer chains grafted on a sphere to electric fields generated by the uniform positive or negative charges on the grafting substrate in the planar polyelectrolyte brush limit. Also the effect of curvature of the grafting sphere on the brush height of weak polybase brushes in the absence of surface charges is investigated. The numerical study reveals interesting and nontrivial dependence of the brush height on the radius of the grafting substrate. Consistent with experimental results, in the parameter range of the surface charge density examined, the brush height is found to be independent of the applied electric field at intermediate and high grafting densities. At relatively low grafting density, the applied negative surface charge which is termed as negative bias in this study results in a reduction of the brush height. At rather low grafting density, the positive bias corresponding to applied positive surface charges can lead to a slight increase in the brush height. The underlining mechanism governing the response of weak polybase brushes to the applied electric field is elucidated.

An underwater superoleophobic surface that can be activated/deactivated via external triggers

Poly[(2-dimethylamino)ethyl methacrylate] (pDMAEMA) brush surfaces were prepared using a facile aqueous Activators ReGenerated by Electron Transfer Atom Transfer Radical Polymerization (ARGET-ATRP) protocol at ambient temperature without any need to purge reaction solutions of oxygen. This produced underwater superoleophobic surfaces, which exhibited high advancing (θA, 164-166°) and receding (θR, 153-165°) contact angles (CAs) and low CA hysteresis (1-11°) with a variety of oils. Both in situ spectroscopic ellipsometry and dynamic CA measurements confirmed that pDMAEMA brush surfaces responded to three different external stimuli (pH, ionic strength, and temperature) by changing their thicknesses, degree of hydration, or their chemical composition. Increasing pH resulted in the largest decrease in hydration, followed by increasing temperature, and increasing ionic strength gave the smallest change in hydration. Coincident with these structural changes, stimulus-responsive dynamic dewetting behavior with various oils was observed. Increasing pH or ionic strength drastically reduced the θR values of oil drops and increased CA hysteresis, resulting in a sticky surface on which oil drops were pinned. No noticeable changes in dynamic oleophobicity were observed with increasing temperature. In addition, when oil drops impacted onto the brush surface instead of being gently placed, surfaces did not exhibit stimulus-responsive dewetting properties, being oleophobic under all conditions.

Brush/gold nanoparticle hybrids: effect of grafting density on the particle uptake and distribution within weak polyelectrolyte brushes

The effect of the brush grafting density on the loading of 13 nm gold nanoparticles (AuNPs) into stimuli-responsive poly(N,N-(dimethylamino ethyl) methacrylate) (PDMAEMA) brushes anchored to flat impenetrable substrates is reported. Atom-transfer radical polymerization (ATRP) is used to grow polymer brushes via a "grafting from" approach from a 2-bromo-2-methyl-N-(3-(triethoxysilyl) propyl) propanamide (BTPAm)-covered silicon substrate. The grafting density is varied by using mixtures of initiator and a "dummy" molecule that is not able to initiate polymerization. A systematic study is carried out by varying the brush grafting density while keeping all of the other parameters constant. X-ray reflectivity is a suitable tool for investigating the spatial structure of the hybrid, and it is combined with scanning electron microscopy and UV/vis spectroscopy to study the particle loading and interpenetration of the particles within the polymer brush matrix. The particle uptake increases with decreasing grafting density and is highest for an intermediate grafting density because more space between the polymer chains is available. For very low grafting densities of PDMAEMA brushes, the particle uptake decreases because of a lack of the polymer matrix for the attachment of particles. The structure of the surface-grafted polymer chains changes after particle attachment. More water is incorporated into the brush matrix after particle immobilization, which leads to a swelling of the polymer chains in the hybrid material. Water can be removed from the brush by decreasing the relative humidity, which leads to brush shrinking and forces the AuNPs to get closer to each other.

The relationship between charge density and polyelectrolyte brush profile using simultaneous neutron reflectivity and in situ attenuated total internal reflection FTIR

We report on a novel experimental study of a pH-responsive polyelectrolyte brush at the silicon/D2O interface. A poly[2-(diethylamino)ethyl methacrylate] brush was grown on a large silicon crystal which acted as both a substrate for a neutron reflectivity solid/liquid experiment but also as an FTIR-ATR spectroscopy crystal. This arrangement has allowed for both neutron reflectivities and FTIR spectroscopic information to be measured in parallel. The chosen polybase brush shows strong IR bands which can be assigned to the N-D(+) stretch, D2O, and a carbonyl group. From such FTIR data, we are able to closely monitor the degree of protonation along the polymer chain as well as revealing information concerning the D2O concentration at the interface. The neutron reflectivity data allows us to determine the physical brush profile normal to the solid/liquid interface along with the corresponding degree of hydration. This combined approach makes it possible to quantify the charge on a polymer brush alongside the morphology adopted by the polymer chains.

Coupling pH-responsive polymer brushes to electricity: switching thickness and creating waves of swelling or collapse

Electrolysis of water is proposed as a method to couple the pH-responsive behavior of polymer brushes to an electrical stimulus. It is shown that an electrode in close proximity to a pH-responsive polymer brush can change the local solution pH, inducing either swelling or collapse of the polymer brush. By alternating the bias of the voltage applied to the electrode, either acidic or alkaline conditions can be generated, and reproducible cycles of polymer brush swelling and collapse can be achieved. It was found that the length of time which the electrical stimulus is applied to the electrodes can be as short as 10 s and that, once "switched", polymer brushes remain in the switched state for many minutes after the electrical stimulus is turned off. In other experiments, two electrodes were positioned 10 cm apart with a pH-responsive brush in between. Under these conditions waves of either acidic or alkaline solution pH could be generated which caused a coincident wave of polymer brush swelling or collapse. These waves originate from one electrode and travel across the brush surface toward the opposite electrode with a velocity of ~40 μm s(-1).

Structure of polyelectrolyte brushes subject to normal electric fields

Molecular dynamic simulations of salt-free polyelectrolyte brushes subject to external fields applied normal to the grafting substrate reveal the three-dimensional monomer and counterion distributions. It is found that below a critical electric field, local electroneutrality holds for densely grafted brushes and the brush height remains independent of field intensity. Above this critical field (which scales as 1/3 with grafting density) brush height increases smoothly, and the fraction of condensed counterions decreases. The brush bifurcates into two subpopulations of stretched and collapsed chains when the grafting density is not low. At intermediate grafting densities, the majority of chains are stretched and the minority are nonstretched. At high grafting densities bifurcation and brush height growth occur consecutively. The majority of the chains are nonstretched at high grafting densities. Although not observed prior to overstretching of the chain model, it is predicted that the two subpopulations will re-merge to a single highly stretched phase when field intensity reaches a third critical value. The ability to control subpopulations of chains suggests that utilizing electric fields normal to polyelectrolyte brushes holds potential as controllable gates in microfluidic devices.

Nonfouling capture-release substrates based on polymer brushes for separation of water-dispersed oil droplets

We have demonstrated capture and release of underwater-oil droplets based on fouling-resistant surfaces coated with pH-responsive polymer brushes. In response to the change of environmental pH, oil droplets were captured on the polymer brush-modified surfaces in the high adhesion state. As the droplet volume increased upon coalescence with other oil droplets in the aqueous phase, the captured droplets eventually self-released from the surfaces under the influence of buoyancy and rose to the air-water interface. The fact that the polymer brush surfaces were partially oil-wettable (high oil-in-water contact angles) enabled the adhesion but not the spreading of oil droplets. This allowed buoyancy release of oil droplets and led to fouling-resistant surfaces that could be reused for capture-release of more oil droplets. The practicality and versatility of this oil droplet capture-release system was demonstrated using monodisperse and polydisperse hydrocarbon oil compositions in purified water, tap water, and brines in which the salt concentration was as high as that of seawater.

Structure and collapse of a surface-grown strong polyelectrolyte brush on sapphire

We have used neutron reflectometry to investigate the behavior of a strong polyelectrolyte brush on a sapphire substrate, grown by atom-transfer radical polymerization (ATRP) from a silane-anchored initiator layer. The initiator layer was deposited from vapor, following treatment of the substrate with an Ar/H(2)O plasma to improve surface reactivity. The deposition process was characterized using X-ray reflectometry, indicating the formation of a complete, cross-linked layer. The brush was grown from the monomer [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC), which carries a strong positive charge. The neutron reflectivity profile of the swollen brush in pure water (D(2)O) showed that it adopted a two-region structure, consisting of a dense surface region ∼100 Å thick, in combination with a diffuse brush region extending to around 1000 Å from the surface. The existence of the diffuse brush region may be attributed to electrostatic repulsion from the positively charged surface region, while the surface region itself most probably forms due to polyelectrolyte adsorption to the hydrophobic initiator layer. The importance of electrostatic interactions in maintaining the brush region is confirmed by measurements at high (1 M) added 1:1 electrolyte, which show a substantial transfer of polymer from the brush to the surface region, together with a strong reduction in brush height. On addition of 10(-4) M oppositely charged surfactant (sodium dodecyl sulfate), the brush undergoes a dramatic collapse, forming a single dense layer about 200 Å in thickness, which may be attributed to the neutralization of the monomers by adsorbed dodecyl sulfate ions in combination with hydrophobic interactions between these dodecyl chains. Subsequent increases in surfactant concentration result in slow increases in brush height, which may be caused by stiffening of the polyelectrolyte chains due to further dodecyl sulfate adsorption.

Effects of chain stiffness and salt concentration on responses of polyelectrolyte brushes under external electric field

We report a molecular dynamics study on non-equilibrium dynamics of polyelectrolyte brushes under external electric fields. In this work, the effects of chain stiffness and salt concentration on static and dynamic responses of the brushes are addressed in detail. Our simulations indicate that varying these parameters induce rich electro-responsive behavior of the brushes. The increase of salt concentration results in the enhancement of an opposite electric field formed by non-equilibrium distribution of cations and anions, which resists stretching or shrinkage of grafted chains. At strong positive electric fields, the flexible brushes are more sensitive to the change of salt concentration. When reversing the electric field, the stiff brushes undergo a conformational transition from collapse to complete stretching. At high salt concentrations, dynamic responsive magnitude of the brush thickness to added electric field is strongly reduced. It was found that the fall time for the stiff brush becomes much shorter than that for the flexible brush. Additionally, increasing ion concentration leads to an excess extension or shrinkage of flexible brushes. For strongly stiff brushes, such phenomenon occurs in the presence or absence of salt.