Adsorption, desorption, and removal of polymeric nanomedicine on and from cellulose surfaces: effect of size

Cellulose derivatives as environmentally-friendly additives in water-based drilling fluids: A review

The application of cellulose derivatives including carboxymethyl cellulose (CMC), polyanionic cellulose (PAC), hydroxyethyl cellulose (HEC), cellulose nanofibrils (CNFs), and cellulose nanocrystals (CNCs) has gained enormous interest, especially as environmentally friendly additives for water-based drilling fluids (WBDFs). This is due to their sustainable, biodegradable, and biocompatible nature. Furthermore, cellulose nanomaterials (CNMs), which include both CNFs and CNCs, possess unique properties such as nanoscale dimensions, a large surface area, as well as unique mechanical, thermal, and rheological performance that makes them stand out as compared to other additives used in WBDFs. The high surface hydration capacity, strong interaction with bentonite, and the presence of a complex network within the structure of CNMs enable them to act as efficient rheological modifiers in WBDFs. Moreover, the nano-size dimension and facilely tunable surface chemistry of CNMs make them suitable as effective fluid loss reducers as well as shale inhibitors as they have the ability to penetrate, absorb, and plug the nanopores within the exposed formation and prevent further penetration of water into the formation. This review provides an overview of recent progress in the application of cellulose derivatives, including CMC, PAC, HEC, CNFs, and CNCs, as additives in WBDFs. It begins with a discussion of the structure and synthesis of cellulose derivatives, followed by their specific application as rheological, fluid loss reducer, and shale inhibition additives in WBDFs. Finally, the challenges and future perspectives are outlined to guide further research and development in the effective utilization of cellulose derivatives as additives in WBDFs.

Electrostatics Control Nanoparticle Interactions with Model and Native Cell Walls of Plants and Algae

A lack of mechanistic understanding of nanomaterial interactions with plants and algae cell walls limits the advancement of nanotechnology-based tools for sustainable agriculture. We systematically investigated the influence of nanoparticle charge on the interactions with model cell wall surfaces built with cellulose or pectin and performed a comparative analysis with native cell walls of Arabidopsis plants and green algae (Choleochaete). The high affinity of positively charged carbon dots (CDs) (46.0 ± 3.3 mV, 4.3 ± 1.5 nm) to both model and native cell walls was dominated by the strong ionic bonding between the surface amine groups of CDs and the carboxyl groups of pectin. In contrast, these CDs formed weaker hydrogen bonding with the hydroxyl groups of cellulose model surfaces. The CDs of similar size with negative (-46.2 ± 1.1 mV, 6.6 ± 3.8 nm) or neutral (-8.6 ± 1.3 mV, 4.3 ± 1.9 nm) ζ-potentials exhibited negligible interactions with cell walls. Real-time monitoring of CD interactions with model pectin cell walls indicated higher absorption efficiency (3.4 ± 1.3 10-9) and acoustic mass density (313.3 ± 63.3 ng cm-2) for the positively charged CDs than negative and neutral counterparts (p < 0.001 and p < 0.01, respectively). The surface charge density of the positively charged CDs significantly enhanced these electrostatic interactions with cell walls, pointing to approaches to control nanoparticle binding to plant biosurfaces. Ca2+-induced cross-linking of pectin affected the initial absorption efficiency of the positively charged CD on cell wall surfaces (∼3.75 times lower) but not the accumulation of the nanoparticles on cell wall surfaces. This study developed model biosurfaces for elucidating fundamental interactions of nanomaterials with cell walls, a main barrier for nanomaterial translocation in plants and algae in the environment, and for the advancement of nanoenabled agriculture with a reduced environmental impact.

Influence of Surface Roughness, Nanostructure, and Wetting on Bacterial Adhesion

Bacterial fouling is a persistent problem causing the deterioration and failure of functional surfaces for industrial equipment/components; numerous human, animal, and plant infections/diseases; and energy waste due to the inefficiencies at internal and external geometries of transport systems. This work gains new insights into the effect of surface roughness on bacterial fouling by systematically studying bacterial adhesion on model hydrophobic (methyl-terminated) surfaces with roughness scales spanning from ∼2 nm to ∼390 nm. Additionally, a surface energy integration framework is developed to elucidate the role of surface roughness on the energetics of bacteria and substrate interactions. For a given bacteria type and surface chemistry; the extent of bacterial fouling was found to demonstrate up to a 75-fold variation with surface roughness. For the cases showing hydrophobic wetting behavior, both increased effective surface area with increasing roughness and decreased activation energy with increased surface roughness was concluded to enhance the extent of bacterial adhesion. For the cases of superhydrophobic surfaces, the combination of factors including (i) the surpassing of Laplace pressure force of interstitial air over bacterial adhesive force, (ii) the reduced effective substrate area for bacteria wall due to air gaps to have direct/solid contact, and (iii) the reduction of attractive van der Waals force that holds adhering bacteria on the substrate were summarized to weaken the bacterial adhesion. Overall, this study is significant in the context of designing antifouling coatings and systems as well as explaining variations in bacterial contamination and biofilm formation processes on functional surfaces.

Multifunctional Cellulose and Cellulose-Based (Nano) Composite Adsorbents

In recent years, faced with the improvement of environmental quality problems, cellulose and cellulose-based (nano) composites have attracted great attention as adsorbents. In this review article, we first report the recent progress of modification and functionalization of cellulose adsorbents. In addition, the adsorbents produced by the modification and functionalization of carboxymehyl cellulose are also introduced. Moreover, the cellulose-based (nano) composites as adsorbents are reviewed in detail. Finally, the development prospect of cellulose and cellulose-based (nano) composites is studied in the field of the environment. In this review article, a critical comment is given based on our knowledge. It is believed that these biomass adsorbents will play an increasingly important role in the field of the environment.

Adsorption Behavior of Congo Red onto Barium-Doped ZnO Nanoparticles: Correlation between Experimental Results and DFT Calculations

Ba-loaded ZnO nanoparticles (Ba/ZnO) were obtained by the co-precipitation process and employed as a sorbent for Congo Red (C₃₂H₂₂N₆Na₂O₆S₂) dye (CR). Physicochemical parameters such as particle size, pH, and contact time were checked to characterize the adsorption process. The maximum adsorption capacity of Ba/ZnO NPs for CR (1614.26 mg/g) proves its potential utility in the elimination of CR dye from wastewater. The adsorption mechanism was studied via infrared spectroscopy and density functional theory calculations. The geometrical parameters and electronic properties of the CR-Ba/ZnO complex, particularly the interaction energy, the density of states, and the charge transfer, highlighted the Ba-ion mediation in the chemical bond formation between CR and the surface. The interaction between CR and Ba-doped ZnO has found to show strong chemisorption with charge transfer between the SO₃^- group and adsorbed Ba²⁺ ion on the surface.

Lipophilicity of Cationic Ligands Promotes Irreversible Adsorption of Nanoparticles to Lipid Bilayers

A mechanistic understanding of the influence of the surface properties of engineered nanomaterials on their interactions with cells is essential for designing materials for applications such as bioimaging and drug delivery as well as for assessing nanomaterial safety. Ligand-coated gold nanoparticles have been widely investigated because their highly tunable surface properties enable investigations into the effect of ligand functionalization on interactions with biological systems. Lipophilic ligands have been linked to adverse biological outcomes through membrane disruption, but the relationship between ligand lipophilicity and membrane interactions is not well understood. Here, we use a library of cationic ligands coated on 2 nm gold nanoparticles to probe the impact of ligand end group lipophilicity on interactions with supported phosphatidylcholine lipid bilayers as a model for cytoplasmic membranes. Nanoparticle adsorption to and desorption from the model membranes were investigated by quartz crystal microbalance with dissipation monitoring. We find that nanoparticle adsorption to model membranes increases with ligand lipophilicity. The effects of ligand structure on gold nanoparticle attachment were further analyzed using atomistic molecular dynamics simulations, which showed that the increase in ligand lipophilicity promotes ligand intercalation into the lipid bilayer. Together, the experimental and simulation results could be described by a two-state model that accounts for the initial attachment and subsequent conversion to a quasi-irreversibly bound state. We find that only nanoparticles coated with the most lipophilic ligands in our nanoparticle library undergo conversion to the quasi-irreversible state. We propose that the initial attachment is governed by interaction between the ligands and phospholipid tail groups, whereas conversion into the quasi-irreversibly bound state reflects ligand intercalation between phospholipid tail groups and eventual lipid extraction from the bilayer. The systematic variation of ligand lipophilicity enabled us to demonstrate that the lipophilicity of cationic ligands correlates with nanoparticle-bilayer adsorption and suggested that changing the nonpolar ligand R group promotes a mechanism of ligand intercalation into the bilayer associated with irreversible adsorption.

New insights into interaction of proteins in extracellular polymeric substances of activated sludge with ciprofloxacin using quartz crystal microbalance with dissipation

Proteins in extracellular polymeric substances play a vital role in adsorbing organic contaminants in biological wastewater treatment processes, but there is still lack of a fast and effective approach to monitor their interaction. Quartz crystal microbalance with dissipation (QCM-D) was used to investigate the binding and viscoelastic properties of ciprofloxacin (CIP) on extracellular proteins from activated sludge by a two-step sequential deposition method. A saturated viscoelastic monolayer of proteins was formed on the crystal by injecting 500 mg L^-1 extracellular proteins. Binding of CIP with the extracellular proteins film followed the pseudo-first-order kinetic equation and Langmuir model, with the maximum binding capacity of 172.4 mg g^-1. The binding mass, energy dissipation, and reaction rate constant increased with increasing CIP concentration. A strong binding was obtained at pH 5, suggesting electrostatic interactions as the dominating binding mechanism. Cations inhibited CIP binding with extracellular proteins, probably due to cations competition. Two binding periods were distinguished according to the viscoelastic properties of CIP layer: viscous binding in the initial period and elastic towards binding saturation. Results highlighted QCM-D as an effective and real-time technique to evaluate the role of extracellular proteins in contaminants removal.

Role of membrane-embedded drug efflux ABC transporters in the cancer chemotherapy

One of the major problems being faced by researchers and clinicians in leukemic treatment is the development of multidrug resistance (MDR) which restrict the action of several tyrosine kinase inhibitors (TKIs). MDR is a major obstacle to the success of cancer chemotherapy. The mechanism of MDR involves active drug efflux transport of ABC superfamily of proteins such as Pglycoprotein (P-gp/ABCB1), multidrug resistance-associated protein 2 (MRP2/ABCC2), and breast cancer resistance protein (BCRP/ABCG2) that weaken the effectiveness of chemotherapeutics and negative impact on the future of anticancer therapy. In this review, the authors aim to provide an overview of various multidrug resistance (MDR) mechanisms observed in cancer cells as well as the various strategies developed to overcome these MDR. Extensive studies have been carried out since last several years to enhance the efficacy of chemotherapy by defeating these MDR mechanisms with the use of novel anticancer drugs that could escape from the efflux reaction, MDR modulators or chemosensitizers, multifunctional nanotechnology, and RNA interference (RNAi) therapy.

Simulation of nanoparticle transport and adsorption in a microfluidic lung-on-a-chip device

The effect of air-borne nanoparticles (NPs) on human health is an active area of research, with clinical relevance evidenced by the current COVID-19 pandemic. As in vitro models for such studies, lung-on-a-chip (LOAC) devices can represent key physical and physiological aspects of alveolar tissues. However, widespread adoption of the LOAC device for NP testing has been hampered by low intra-laboratory and inter-laboratory reproducibility. To complement ongoing experimental work, we carried out finite-element simulations of the deposition of NPs on the epithelial layer of a well-established LOAC design. We solved the Navier-Stokes equations for the fluid flow in a three-dimensional domain and studied the particle transport using Eulerian advection-diffusion for fine NPs and Lagrangian particle tracking for coarse NPs. Using Langmuir and Frumkin kinetics for surface adsorption and desorption, we investigated NP adsorption under different exercise and breath-holding patterns. Conditions mimicking physical exercise, through changes in air-flow volume and breathing frequency, enhance particle deposition. Puff profiles typical of smoking, with breath-holding between inhalation and exhalation, also increase particle deposition per breathing cycle. Lagrangian particle tracking shows Brownian motion and gravitational settling to be two key factors, which may cooperate or compete with each other for different particle sizes. Comparisons are made with experimental data where possible and they show qualitative and semi-quantitative agreement. These results suggest that computer simulations can potentially inform and accelerate the design and application of LOAC devices for analyzing particulate- and microbe-alveolar interactions.

Interactions of polymeric drug carriers with DDT reduce their combined cytotoxicity

Attention has been paid to the environmental distribution and fate of nanomedicines. However, their effects on the toxicity of environmental pollutants are lack of knowledge. In this study, the negatively charged poly (ethylene glycol)-b-poly (L-lactide-co-glycolide) (mPEG-PLA) and positively charged polyethyleneimine-palmitate (PEI-PA) nanomicelles were synthesized and served as model drug carriers to study the interaction and combined toxicity with dichlorodiphenyltrichloroethane (DDT). DDT exerted limited effect on the biointerfacial behavior of mPEG-PLA nanomicelles, whereas it significantly mitigated the attachment of PEI-PA nanomicelles on the model cell membrane as monitored by quartz crystal microbalance with dissipation (QCM-D). The cytotoxicity of DDT towards NIH 3T3 cells was greatly decreased by either co-treatment or pre-treatment with the nanomicelles according to the results of real-time cell analysis (RTCA). The cell viability of NIH 3T3 exposed to DDT was increased up to 90% by the co-treatment with mPEG-PLA nanomicelles. Three possible reasons were proposed: (1) decreased amount of free DDT in the cell culture medium due to the partitioning of DDT into nanomicelles; (2) mitigated cellular uptake of nanomicelle-DDT complexes due to the complex agglomeration or electrostatic repulsion between complexes and cell membrane; (3) detoxification effect in the lysosome upon endocytosis of nanomicelle-DDT complexes.

Polylactide-tethered prodrugs in polymeric nanoparticles as reliable nanomedicines for the efficient eradication of patient-derived hepatocellular carcinoma

Nanomedicines have been extensively explored for cancer treatment, and their efficacies have arguably been proven in various cancer cell-derived xenograft (CDX) mouse models. However, they generally fail to show such therapeutic advantages in patients because of the huge pathological differences between human tumors and CDX models. Methods: In this study, we fabricated colloidal ultrastable nanomedicines from polymeric prodrugs and compared the therapeutic efficacies in hepatocellular carcinoma (HCC) CDX and clinically relevant patient-derived xenograft (PDX) mouse models, which closely mimic human tumor pathological properties. Working towards this goal, we esterified a highly potent SN38 (7-ethyl-10-hydroxycamptothecin) agent using oligo- or polylactide (oLA or PLA) segments with varying molecular weights. Results: The resulting SN38 conjugates assembled with polyethylene glycol-block-polylactic acid to form systemically injectable nanomedicines. With increasing PLA chain length, the SN38 conjugates showed extended retention in the nanoparticles and superior antitumor activity, completely eradicating xenografted tumors in both mouse models. Our data implicate that these small-sized and ultrastable nanomedicines might also efficaciously treat cancer in patients. More interestingly, the systemically delivered nanomedicines notably alleviated the incidence of bloody diarrhea. Conclusion: Our studies demonstrate that the appropriate molecular editing of anticancer drugs enables the generation of better tolerated cytotoxic nanotherapy for cancer, which represents a potentially useful scaffold for further clinical translation.

Size-Dependent Thermodynamics and Kinetics of Adsorption on Nanoparticles: A Theoretical and Experimental Study

Owing to their excellent adsorption properties compared with those of the corresponding bulk materials, nanoparticles have been widely applied in many fields. Their properties depend on the thermodynamics and kinetics of adsorption, which depend on the particle size. In this paper, we present universal theories of the thermodynamics and kinetics for nanoadsorption that have been developed over the past few years. Theoretically, we have derived relationships between the adsorption thermodynamic properties and the particle size, as well as those between the adsorption kinetic parameters and the particle size. Moreover, we discuss the regularities and mechanisms of influence of the particle size on the thermodynamics and kinetics of adsorption. Experimentally, taking the adsorption of methyl orange on nano-CeO₂ in aqueous solution as a system, we have studied the size-dependent thermodynamics and kinetics of the system, and the size dependences were confirmed to be consistent with the theoretical relationships. The results indicate that particle size has a significant effect on the thermodynamic properties and kinetic parameters of adsorption: with decreasing particle size of nano-CeO₂, the adsorption equilibrium constant K^⊖ and the adsorption rate constant k increase, while the molar Gibbs free energy of adsorption Δ_ads G_m^⊖, the molar adsorption entropy Δ_ads S_m^⊖, the molar adsorption enthalpy Δ_ads H_m^⊖, the adsorption activation energy E_a, and the adsorption pre-exponential factor A all decrease. Indeed, ln K^⊖, Δ_ads G_m^⊖, Δ_ads S_m^⊖, Δ_ads H_m^⊖, ln  k, E_a, and ln  A are each linearly related to the reciprocal of particle size. Furthermore, thermodynamically, Δ_ads G_m^⊖ and ln  K^⊖ are influenced by the molar surface area and the difference in surface tensions, Δ_ads S_m^⊖ is influenced by the molar surface area and the difference in temperature coefficients of surface tension, and Δ_ads H_m^⊖ is influenced by the molar surface area, the difference in surface tensions, and the difference in temperature coefficients of surface tension. Kinetically, E_a is influenced by the partial molar surface enthalpy of the nanoadsorbent, ln  A is influenced by the partial molar surface entropy, and ln  k is influenced by the partial molar surface Gibbs energy. The theories can quantitatively describe adsorption behavior on nanoparticles, explain the regularities and mechanisms of influence of particle size, and provide guidance for the research and application of nanoadsorption.

An in vitro demonstration of overcoming drug resistance in SKOV3 TR and MCF7 ADR with targeted delivery of polymer pro-drug conjugates

Drug resistance is a common phenomenon that occurs in cancer chemotherapy. Delivery of chemotherapeutic agents as polymer pro-drug conjugates (PPDCs) pretargeted with bispecific antibodies could circumvent drug resistance in cancer cells. To demonstrate this approach to overcome drug resistance, Paclitaxel (Ptxl)-resistant SKOV3 TR human ovarian- and doxorubicin (Dox)-resistant MCF7 ADR human mammary-carcinoma cell lines were used. Pre-targeting over-expressed biotin or HER2/neu receptors on cancer cells was conducted by biotinylated anti-DTPA or anti-HER2/neu affibody - anti-DTPA Fab bispecific antibody complexes. The targeting PPDCs are either D-Dox-PGA or D-Ptxl-PGA. Cytotoxicity studies demonstrate that the pretargeted approach increases cytotoxicity of Ptxl or Dox in SKOV3 TR or MCF7 ADR resistant cell lines by 5.4 and 27 times, respectively. Epifluorescent microscopy - used to track internalization of D-Dox-PGA and Dox in MCF7 ADR cells - shows that the pretargeted delivery of D-Dox-PGA resulted in a 2- to 4-fold increase in intracellular Dox concentration relative to treatment with free Dox. The mechanism of internalization of PPDCs is consistent with endocytosis. Enhanced drug delivery and intracellular retention following pretargeted delivery of PPDCs resulted in greater tumor cell toxicity in the current in vitro studies.

Attapulgite Nanofiber-Cellulose Nanocomposite with Core-Shell Structure for Dye Adsorption

Nanocomposite particle used for adsorption has attracted continuous attention because of large specific surface area and adjustable properties from nanocomponent. Herein nanocomposite particle with cellulose core and attapulgite nanofibers shell was prepared. The size of cellulose core was about 2 mm and the thickness of nanofibers shell is about 300 μm. Adsorption capacity of nanocomposite particle to methylene blue can reach up to 11.07 mg L−1and the best adsorption effect occurs at pH = 8; pseudo-first-order equation and the Langmuir equation best describe the adsorption kinetic and isotherm, respectively; repeated adsorption-desorption experimental results show that 94.64% of the original adsorption capacity can be retained after being reused three times.

Adhesion characteristics of nano/micro-sized particles with dual ligands with different interaction distances

Dual ligand conjugated particle for targeted delivery. Rotational dislodging force on the ligand–receptor interaction. Optimal receptor and ligand ratio exist.

Transport of polymeric nanoparticulate drug delivery systems in the proximity of silica and sand

The contamination of the environment with traditional therapeutics due to metabolic excretion, improper disposal, and industrial waste has been well-recognized. However, knowledge of the environmental distribution and fate of emerging classes of nanomedicine is scarce. This work investigates the effect of surface chemistry of polymeric nanoparticulate drug delivery systems (PNDDS) on their adsorption dynamics and transport in the vicinity of environmentally relevant surfaces for a concentration comparable with hospital and pharmaceutical manufacturing effluents. To this end, five different types of paclitaxel-based nanomedicine having different polymer stabilizers were employed. Their transport behavior was characterized via quartz crystal microbalance, sand column, spectrofluorometry, and dynamic light scattering techniques. PNDDS having positive zeta-potential displayed strong adsorption onto silica surfaces and no mobility in porous media of quartz sand, even in the presence of humic acid. The mobility of negatively charged PNDDS strongly depended on the amount and type of salt present in the aqueous media: Without any salt, such PNDDS demonstrated no adsorption on silica surfaces and high levels of mobility in sand columns. The presence of CaCl2 and CaSO4, even at low ionic strengths (i.e. 10 mM), induced PNDDS adsorption on silica surfaces and strongly limited the mobility of such PNDSS in sand columns.

Flow enhancement of water-based nanoparticle dispersion through microscale sedimentary rocks

Understanding and controlling fluids flow at the microscale is a matter of growing scientific and technological interest. Flow enhancements of water-based nanoparticle dispersions through microscale porous media are investigated through twelve hydrophilic sedimentary rocks with pore-throat radius between 1.2 and 10 μm, which are quantitatively explained with a simple model with slip length correction for Darcy flow. Both as wetting phase, water exhibited no-slip Darcy flow in all cores; however, flow enhancement of nanoparticle dispersions can be up to 5.7 times larger than that of water, and it increases with the decreasing of pore-throat radius. The experimental data reveals characteristic slip lengths are of order 500 and 1000 nm for 3M® and HNPs-1 nanoparticles, respectively, independent of the lithology or nanoparticle concentration or shear rate. Meanwhile, the phenomenon of flow degradation is observed for HNPs-2 nanoparticles. These results explore the feasible application of using nanoparticle dispersions to control flow at the microscale.

Real-time analysis of porphyrin J-aggregation on a plant-esterase-functionalized surface using quartz crystal microbalance with dissipation monitoring

The J-aggregation of meso-tetra (4-sulfonatophenyl) porphine (TPPS4) on a plant-esterase-functionalized surface in a 1:1 v/v mixture of 0.05 M HCl/ethanol (pH ∼1.38) was analyzed in real time using a quartz crystal microbalance with dissipation monitoring (QCM-D). Simultaneous changes in frequency (Δf) and energy dissipation (ΔD) correlated well with mass and structural changes during the sequential phases of slow nucleation, rapid aggregation, and equilibration in J-aggregation. The time-dependent mass adsorption could be quantitatively analyzed with a model, which integrated two simple equations obtained when the surface concentration of TPPS4 (Γ(TPPS4)) was below and above the critical aggregation surface concentration (CASC). This study provides a new view for the protein-induced J-aggregation process, which may be helpful for understanding the interactions of self-assembled nanostructures with biomolecules.

Iron oxide nanoparticles grafted with sulfonated copolymers are stable in concentrated brine at elevated temperatures and weakly adsorb on silica

Magnetic nanoparticles that can be transported in subsurface reservoirs at high salinities and temperatures are expected to have a major impact on enhanced oil recovery, carbon dioxide sequestration, and electromagnetic imaging. Herein we report a rare example of steric stabilization of iron oxide (IO) nanoparticles (NPs) grafted with poly(2-acrylamido-2-methylpropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) that not only display colloidal stability in standard American Petroleum Institute (API) brine (8% NaCl + 2% CaCl2 by weight) at 90 °C for 1 month but also resist undesirable adsorption on silica surfaces (0.4% monolayer NPs). Because the AMPS groups interacted weakly with Ca(2+), they were sufficiently well solvated to provide steric stabilization. The PAA groups, in contrast, enabled covalent grafting of the poly(AMPS-co-AA) chains to amine-functionalized IO NPs via formation of amide bonds and prevented polymer desorption even after a 40,000-fold dilution. The aforementioned methodology may be readily adapted to stabilize a variety of other functional inorganic and organic NPs at high salinities and temperatures.

Cubic phase nanoparticles for sustained release of ibuprofen: formulation, characterization, and enhanced bioavailability study

In order to improve the oral bioavailability of ibuprofen, ibuprofen-loaded cubic nanoparticles were prepared as a delivery system for aqueous formulations. The cubic inner structure was verified by cryogenic transmission electron microscopy. With an encapsulation efficiency greater than 85%, the ibuprofen-loaded cubic nanoparticles had a narrow size distribution around a mean size of 238 nm. Differential scanning calorimetry and X-ray diffraction determined that ibuprofen was in an amorphous and molecular form within the lipid matrix. The in vitro release of ibuprofen from cubic nanoparticles was greater than 80% at 24 hours, showing sustained characteristics. The pharmacokinetic study in beagle dogs showed improved absorption of ibuprofen from cubic nanoparticles compared to that of pure ibuprofen, with evidence of a longer half-life and a relative oral bioavailability of 222% (P < 0.05). The ibuprofen-loaded cubic nanoparticles provide a promising carrier candidate with an efficient drug delivery for therapeutic treatment.

Potential environmental implications of nano-enabled medical applications: critical review

The application of nanotechnology and nanoscience for medical purposes is anticipated to make significant contributions to enhance human health in the coming decades. However, the possible future mass production and use of these medical innovations exhibiting novel and multifunctional properties will very likely lead to discharges into the environment giving rise to potentially new environmental hazards and risks. To date, the sources, the release form and environmental fate and exposure of nano-enabled medical products have not been investigated and little or no data exists, although there are a small number of currently approved medical applications and a number in clinical trials. This paper discusses the current technological and regulatory landscape and potential hazards and risks to the environment of nano-enabled medical products, data gaps and gives tentative suggestions relating to possible environmental hotspots.