Investigation of the hydration of nonfouling material poly(ethylene glycol) by low-field nuclear magnetic resonance

Antibiofilm and antithrombotic hydrogel coating based on superhydrophilic zwitterionic carboxymethyl chitosan for blood-contacting devices

Blood-contacting devices must be designed to minimize the risk of bloodstream-associated infections, thrombosis, and intimal lesions caused by surface friction. However, achieving effective prevention of both bloodstream-associated infections and thrombosis poses a challenge due to the conflicting nature of antibacterial and antithrombotic activities, specifically regarding electrostatic interactions. This study introduced a novel biocompatible hydrogel of sodium alginate and zwitterionic carboxymethyl chitosan (ZW@CMC) with antibacterial and antithrombotic activities for use in catheters. The ZW@CMC hydrogel demonstrates a superhydrophilic surface and good hygroscopic properties, which facilitate the formation of a stable hydration layer with low friction. The zwitterionic-functionalized CMC incorporates an additional negative sulfone group and increased negative charge density in the carboxyl group. This augmentation enhances electrostatic repulsion and facilitates the formation of hydration layer. This leads to exceptional prevention of blood clotting factor adhesion and inhibition of biofilm formation. Subsequently, the ZW@CMC hydrogel exhibited biocompatibility with tests of in vitro cytotoxicity, hemolysis, and catheter friction. Furthermore, in vivo tests of antithrombotic and systemic inflammation models with catheterization indicated that ZW@CMC has significant advantages for practical applications in cardiovascular-related and sepsis treatment. This study opens a new avenue for the development of chitosan-based multifunctional hydrogel for applications in blood-contacting devices.

Effect of Polyelectrolyte Charge Density on the Linear Viscoelastic Behavior and Processing of Complex Coacervate Adhesives

It is well-known that the phase behavior and physicochemical and adhesive properties of complex coacervates are readily tuneable with the salt concentration of the medium. For toxicity reasons, however, the maximum applicable salt concentration in biomedical applications is typically low. Consequently, other strategies must be implemented in order to optimize the properties of the resulting complex coacervates. In this work, the effect of the charge density of a strong polyanion on the properties of complex coacervates was studied. To control this charge density, statistical anionic/charge-neutral hydrophilic copolymers were synthesized by means of an elegant protection/deprotection strategy and subsequently complexed with a strong polycation. The resulting complexes were observed to have an increasing water content as well as faster relaxation dynamics, with either increasing salt concentration or decreasing charge density. Time-salt and time-salt-charge density superpositions could be performed and showed that the relaxation mechanism of the complex coacervates remained unchanged. When the charge density was decreased, lower salt concentration complexes became suitable for viscoelastic adhesion with improved injectability. Such complex coacervates are promising candidates for injectable biomedical adhesives.

Chirality-Selected Coacervate by Chiral Gemini Surfactant

Chiral surfactants present opportunities to self-assemble into supramolecules with a chiral trait; however, the effects of stereochemistry on the formation of simple coacervates remain unclear. Here, we investigate the chirality-selected phase behavior in mixtures of chiral gemini surfactant 1,4-bis(dodecyl-N,N-dimethylammonium bromide)-2,3-butanediol (12-4(OH)2-12) with an oppositely charged chiral mandelic acid (MA). It demonstrates that altering the chirality of surfactants yields a heightened ability to regulate the phase behavior, leading to the formation of three different network-like structures, i.e., wormlike micelle, coacervate, and hydrogel, in the racemate, enantiomer, and mesomer, respectively. The different aggregate structures arise from the intermolecular and intramolecular hydrogen-bond interactions of the two hydroxyl groups located at stereogenic centers. Intriguingly, although they contain similar microstructures, the solid-like hydrogel and liquid-like wormlike micelle show similar low hydration ability and have no encapsulation capability, whereas only coacervate formed by the enantiomers of 12-4(OH)2-12 displays liquid-like characteristics, strong capacity to sequester diverse solutes, and high affinity for tightly bound water simultaneously. These findings further highlight the unique and advantageous properties of coacervates as a promising model for exploring the biological process and understanding how chirality plays a crucial role in early life scenarios and cell evolution at the molecular level.

Integrating Liquification of the Gelated Tumor Interstitium around Nanomedicines with Biconditional GD2-Targeting for Precise and Safe Chemotherapy

The quick diffusion of nanomedicines in the polysaccharide-gel-filling tumor interstitium and precise active targeting are two major obstacles that have not yet been overcome. Here, a poly(L-glutamyl-L-lysine(EK) (p(EK))-camouflaged, doxorubicin (Dox)-conjugated nanomedicine is developed to demonstrate the underlying mechanism of zwitterionic shell in synchronous barrier-penetration and biconditional active targeting. The zwitterionic p(EK) shell liquifies its surrounding water molecules in the polysaccharide gel of tumor interstitium, leading to five times faster diffusion than the pegylated Doxil with similar size in tumor tissue. Its doped sulfonate groups lead to more precise active tumor-targeting than disialoganglioside (GD2) antibody by meeting the dual requirements of tumor microenvironment (TME) pH and overexpression of GD2 on tumor. Consequently, the concentrations of the nanomedicine in tumor are always higher than in life-supported organs in whole accumulation process, reaching over ten times higher Dox in GD2-overexpressing MCF-7 tumors than in life-supporting organs. Furthermore, the nanomedicine also avoids anti-GD2-like accumulation in GD2-expressing kidney in a mouse model. Thus, the nanomedicine expands the therapeutic window of Doxil by more than three times and eliminates tumors with negligible myocardial and acute toxicity. This new insight paves an avenue to design nanodelivery systems for highly precise and safe chemotherapy.

PEG vs. zwitterions: How these surface decorations determine cellular uptake of lipid-based nanocarriers

AIM

To evaluate the impact of polyethylene glycol (PEG) and zwitterionic surface decoration of lipid-based nanocarriers (NC) on cellular uptake.

METHODS

Anionic, neutral and cationic zwitterionic lipid-based NCs based on lecithin were compared with conventional PEGylated lipid-based NCs regarding stability in biorelevant fluids, interaction with endosome mimicking membranes, cytocompatibility, cellular uptake and permeation across intestinal mucosa.

RESULTS

PEGylated and zwitterionic lipid-based NCs exhibited a droplet size between 100 and 125 nm with a narrow size distribution. For the PEGylated and zwitterionic lipid-based NCs only minor alterations in size and PDI in fasted state intestinal fluid and mucus containing buffer were observed, demonstrating similar bioinert properties. Erythrocytes interaction studies revealed enhanced endosomal escape properties for zwitterionic lipid-based NCs compared to PEGylated lipid-based NCs. For the zwitterionic lipid-based NCs negligible cytotoxicity on Caco-2 and HEK cells, even in the highest tested concentration of 1 % (v/v) was recorded. The PEGylated lipid-based NCs showed a cell survival of ≥75 % for concentrations ≤0.05 % on Caco-2 and HEK cells, which was considered as non-toxic. For the zwitterionic lipid-based NCs up to 60-fold higher cellular uptake on Caco-2 cells was determined compared to PEGylated lipid-based NCs. For the cationic zwitterionic lipid-based NCs the highest cellular uptake with 58.5 % and 40.0 % in Caco-2 and HEK cells, respectively, was determined. The results were confirmed visually by life cell imaging. Ex-vivo permeation experiments using rat intestinal mucosa demonstrated up to 8.6-fold enhanced permeation of the lipophilic marker coumarin-6 in zwitterionic lipid-based NCs compared to the control. Up to 6.9-fold enhanced permeation of coumarin-6 in neutral zwitterionic lipid-based NCs compared to the PEGylated counterpart was recorded.

CONCLUSION

The replacement of PEG surfactants with zwitterionic surfactants is a promising approach to overcome the drawbacks of conventional PEGylated lipid-based NCs regarding intracellular drug delivery.

Virus on surfaces: Chemical mechanism, influence factors, disinfection strategies, and implications for virus repelling surface design

While SARS-CoV-2 is generally under control, the question of variants and infections still persists. Fundamental information on how the virus interacts with inanimate surfaces commonly found in our daily life and when in contact with the skin will be helpful in developing strategies to inhibit the spread of the virus. Here in, a critically important review of current understanding of the interaction between virus and surface is summarized from chemistry point-of-view. The Derjaguin-Landau-Verwey-Overbeek and extended Derjaguin-Landau-Verwey-Overbeek theories to model virus attachments on surfaces are introduced, along with the interaction type and strength, and quantification of each component. The virus survival and transfer are affected by a combination of biological, physical, and chemical parameters, as well as environmental parameters. The surface properties for virus and virus survival on typical surfaces such as metals, plastics, and glass are summarized. Attention is also paid to the transfer of virus to/from surfaces and skin. Typical virus disinfection strategies utilizing heat, light, chemicals, and ozone are discussed together with their disinfection mechanism. In the last section, design principles for virus repelling surface chemistry such as surperhydrophobic or surperhydrophilic surfaces are also introduced, to demonstrate how the integration of surface property control and advanced material fabrication can lead to the development of functional surfaces for mitigating the effect of viral infection upon contact.

Strong Inhibition of Ice Growth by Biomimetic Crowding Coacervates

The freezing of biological fluids is intensively studied but remains elusive as it is affected not only by the various components but also by the crowding nature of the biological fluids. Herein, we constructed spherical crowders, fibrous crowders, and coacervates by various components ranging from surfactants to polymers and proteins, to mimic three typical crowders in biological fluids, i.e., globular proteins, fibrous networks, and condensates of biomolecules. It is elucidated that the three crowders exhibit low, moderate, and strong ice growth inhibition activity, respectively, resulting from their different abilities in slowing down water dynamics. Intriguingly, the coacervate consisting of molecules without obvious ice growth inhibition activity strongly inhibits ice growth, which is firstly employed as a highly-potent cryoprotectant. This work provides new insights into the survival of freezing-tolerant organisms and opens an avenue for the design of ice-controlling materials.

Basic amino acid-mediated cationic amphiphilic surfaces for antimicrobial pH monitoring sensor with wound healing effects

BACKGROUND

The wound healing process is a complex cascade of physiological events, which are vulnerable to both our body status and external factors and whose impairment could lead to chronic wounds or wound healing impediments. Conventional wound healing materials are widely used in clinical management, however, they do not usually prevent wounds from being infected by bacteria or viruses. Therefore, simultaneous wound status monitoring and prevention of microbial infection are required to promote healing in clinical wound management.

METHODS

Basic amino acid-modified surfaces were fabricated in a water-based process via a peptide coupling reaction. Specimens were analyzed and characterized by X-ray photoelectron spectroscopy, Kelvin probe force microscopy, atomic force microscopy, contact angle, and molecular electrostatic potential via Gaussian 09. Antimicrobial and biofilm inhibition tests were conducted on Escherichia coli and Staphylococcus epidermidis. Biocompatibility was determined through cytotoxicity tests on human epithelial keratinocytes and human dermal fibroblasts. Wound healing efficacy was confirmed by mouse wound healing and cell staining tests. Workability of the pH sensor on basic amino acid-modified surfaces was evaluated on normal human skin and Staphylococcus epidermidis suspension, and in vivo conditions.

RESULTS

Basic amino acids (lysine and arginine) have pH-dependent zwitterionic functional groups. The basic amino acid-modified surfaces had antifouling and antimicrobial properties similar to those of cationic antimicrobial peptides because zwitterionic functional groups have intrinsic cationic amphiphilic characteristics. Compared with untreated polyimide and modified anionic acid (leucine), basic amino acid-modified polyimide surfaces displayed excellent bactericidal, antifouling (reduction ~ 99.6%) and biofilm inhibition performance. The basic amino acid-modified polyimide surfaces also exhibited wound healing efficacy and excellent biocompatibility, confirmed by cytotoxicity and ICR mouse wound healing tests. The basic amino acid-modified surface-based pH monitoring sensor was workable (sensitivity 20 mV pH-1) under various pH and bacterial contamination conditions.

CONCLUSION

Here, we developed a biocompatible and pH-monitorable wound healing dressing with antimicrobial activity via basic amino acid-mediated surface modification, creating cationic amphiphilic surfaces. Basic amino acid-modified polyimide is promising for monitoring wounds, protecting them from microbial infection, and promoting their healing. Our findings are expected to contribute to wound management and could be expanded to various wearable healthcare devices for clinical, biomedical, and healthcare applications.

Onion-like doxorubicin-carrying polymeric nanomicelles with tumor acidity-sensitive dePEGylation to expose positively-charged chitosan shell for enhanced cancer chemotherapy

To effectively promote antitumor potency of doxorubicin (DOX), a regularly used chemotherapy drug, the tumor acidity-responsive polymeric nanomicelles from self-assembly of the as-synthesized amphiphilic benzoic imine-containing PEGylated chitosan-g-poly(lactic-co-glycolic acid) (PLGA) conjugates were developed as vehicles of DOX. The attained PEGylated chitosan-g-PLGA nanomicelles with high PEGylation degree (H-PEG-CSPNs) were characterized to exhibit a "onion-like" core-shell-corona structure consisting of a hydrophobic PLGA core covered by benzoic imine-rich chitosan shell and outer hydrophilic PEG corona. The DOX-carrying H-PEG-CSPNs (DOX@H-PEG-CSPNs) displayed robust colloidal stability under large-volume dilution condition and in a serum-containing aqueous solution of physiological salt concentration. Importantly, the DOX@H-PEG-CSPNs in weak acidic milieu undergoing the hydrolysis of benzoic imine bonds and increased protonation of chitosan shell showed dePEGylation and surface charge conversion. Also, the considerable swelling of protonated chitosan shell within DOX@H-PEG-CSPNs accelerated drug release. Notably, the cellular internalization of DOX@H-PEG-CSPNs by TRAMP-C1 prostate cancer cells under mimic acidic tumor microenvironment was efficiently boosted upon acidity-triggered detachment of PEG corona and exposure of positively-charged chitosan shell, thus augmenting DOX-mediated anticancer effect. Compared to free DOX molecules, the DOX@H-PEG-CSPNs appreciably suppressed TRAMP-C1 tumor growth in vivo, thereby showing great promise in improving DOX chemotherapy.

Fabrication Strategies Towards Hydrogels for Biomedical Application: Chemical and Mechanical Insights

This review aims at giving selected chemical and mechanical insights on design criteria that should be taken into account in hydrogel production for biomedical applications. Particular emphasis will be given to the chemical aspects involved in hydrogel design: macromer chemical composition, cross-linking strategies and chemistry towards "conventional" and smart/stimuli responsive hydrogels. Mechanical properties of hydrogels in view of regenerative medicine applications will also be considered.

Advanced density-based methods for the characterization of materials, binding events, and kinetics

Investigations of the densities of chemicals and materials bring valuable insights into the fundamental understanding of matter and processes. Recently, advanced density-based methods have been developed with wide measurement ranges (i.e. 0-23 g cm^-3), high resolutions (i.e. 10^-6 g cm^-3), compatibility with different types of samples and the requirement of extremely low volumes of sample (as low as a single cell). Certain methods, such as magnetic levitation, are inexpensive, portable and user-friendly. Advanced density-based methods are, therefore, beneficially used to obtain absolute density values, composition of mixtures, characteristics of binding events, and kinetics of chemical and biological processes. Herein, the principles and applications of magnetic levitation, acoustic levitation, electrodynamic balance, aqueous multiphase systems, and suspended microchannel resonators for materials science are discussed.

Antibacterial Adhesion Strategy for Dental Titanium Implant Surfaces: From Mechanisms to Application

Dental implants are widely used to restore missing teeth because of their stability and comfort characteristics. Peri-implant infection may lead to implant failure and other profound consequences. It is believed that peri-implantitis is closely related to the formation of biofilms, which are difficult to remove once formed. Therefore, endowing titanium implants with anti-adhesion properties is an effective method to prevent peri-implant infection. Moreover, anti-adhesion strategies for titanium implant surfaces are critical steps for resisting bacterial adherence. This article reviews the process of bacterial adhesion, the material properties that may affect the process, and the anti-adhesion strategies that have been proven effective and promising in practice. This article intends to be a reference for further improvement of the antibacterial adhesion strategy in clinical application and for related research on titanium implant surfaces.

Quaternized Sodium Alginate-g-Ethyl-Oxazoline Copolymer Brushes and Their Supramolecular Networks via Hydrogen Bonding

Novel copolymer brushes of quaternized sodium alginate-g-(2-ethyl-2-oxazoline)_n are achieved by the grafting reaction of 2-ethyl-2-oxazoline (EOX) from benzyl bromide groups in quaternized sodium alginate (QSA). The average number of (EOX)_n structural units is mediated from 1 to 5 by changing the molar ratio of the EOX monomer to benzyl bromide side groups. There exists obvious microphase separation between the QSA backbone and (EOX)_n segments in the copolymer brushes due to their thermodynamic incompatibility. The strong hydrogen-bonding interaction between -OH groups in the backbone and N─C═O groups in (EOX)_n segments is helpful for the construction of reversible supramolecular networks. The copolymer brushes show low cytotoxicity for HeLa cells and good antibacterial properties for Escherichia coli and Staphylococcus aureus for the contribution of hydrophilic (EOX)_n segments and antibacterial activity of the quaternary ammonium. The antiprotein behavior of polymer surfaces is improved after rearrangement of (EOX)_n segments by tetrahydrofuran (THF) vapor induction. These copolymer brushes have good prospects for biomedical applications.

Electrospraying Zwitterionic Copolymers as an Effective Biofouling Control for Accurate and Continuous Monitoring of Wastewater Dynamics in a Real-Time and Long-Term Manner

Long-term continuous monitoring (LTCM) of water quality can provide high-fidelity datasets essential for executing swift control and enhancing system efficiency. One roadblock for LTCM using solid-state ion-selective electrode (S-ISE) sensors is biofouling on the sensor surface, which perturbs analyte mass transfer and deteriorates the sensor reading accuracy. This study advanced the anti-biofouling property of S-ISE sensors through precisely coating a self-assembled channel-type zwitterionic copolymer poly(trifluoroethyl methacrylate-random-sulfobetaine methacrylate) (PTFEMA-r-SBMA) on the sensor surface using electrospray. The PTFEMA-r-SBMA membrane exhibits exceptional permeability and selectivity to primary ions in water solutions. NH₄⁺ S-ISE sensors with this anti-fouling zwitterionic layer were examined in real wastewater for 55 days consecutively, exhibiting sensitivity close to the theoretical value (59.18 mV/dec) and long-term stability (error <4 mg/L). Furthermore, a denoising data processing algorithm (DDPA) was developed to further improve the sensor accuracy, reducing the S-ISE sensor error to only 1.2 mg/L after 50 days of real wastewater analysis. Based on the dynamic energy cost function and carbon footprint models, LTCM is expected to save 44.9% NH₄⁺ discharge, 12.8% energy consumption, and 26.7% greenhouse emission under normal operational conditions. This study unveils an innovative LTCM methodology by integrating advanced materials (anti-fouling layer coating) with sensor data processing (DDPA).

Spontaneously Restoring Specific Bioaffinity of RGD in Linear RGD-containing Peptides by Conjugation with Zwitterionic Dendrimers

Peptides are more versatile than small molecule drugs, but their specific bioaffinities are usually lower than their original native proteins because of the loss of preferred conformations. To overcome this key obstacle, we demonstrated a hydrogen bond-induced conformational constraint method to enhance the specific bioaffinities of peptides to achieve a high success rate by using linear RGD-containing peptides as a model of bioactive peptides. By performing molecular simulation, we found that the chemically immobilized linear CRGDS via cysteine (C) at the N-terminus on zwitterionic PAMAM G-5 can not only spontaneously restore the natural conformation of the RGD segment through the assistance of the dynamic hydrogen bond from serine (S) at the C-terminus of the peptide, but it can also narrow the distribution of all possible conformations. Consequently, the conjugates showed comparable or even better high affinity than native proteins without the use of conventional, labor-intensive, synthesis-based structure search methods to construct a binding conformation. In addition, the conjugates showed globular protein-like characteristics chemically, physically, and physiologically. They exhibited not only high efficacy and biosafety both in vitro and in vivo, but they also showed extremely high thermostability even upon boiling in a solution. This approach offers great design flexibility for reviving functional peptides without impairing their high specific affinity for their targets. STATEMENT OF SIGNIFICANCE: : In this work, we developed a swift approach to spontaneously restore the natural conformation of a linear peptide from a nature protein and thus enhance its specific bioaffinity instead of constructing a binding conformation by the labor-intensive, synthesis-based structure search method. In details, our new approach involves dynamically constraining the linear peptide on a zwitterionic PAMAM G-5 surface by a combination of chemical bonding at one terminus and dynamic hydrogen bonding at the other terminus of the linear peptide. The zwitterionic background offers abundant interaction sites for hydrogen bonding as well as resistance to nonspecific interactions. This approach fully restores the specific bioaffinity of RGD segments on a zwitterionic PAMAM G-5 through only one conjugation point at the C-terminus of the peptide. Moreover, the bioaffinity of all three types of RGD-containing peptides is successfully restored, which indicates the high rate of success of this approach in affinity restoring.

Small-molecule fulvic acid with strong hydration ability for non-vitreous cellular cryopreservation

The exploitation of biocompatible ice-control materials especially the small molecules for non-vitreous cryopreservation remains challenging. Here, we report a small molecule of fulvic acid (FA) with strong hydration ability, which enables non-vitreous cellular cryopreservation by reducing ice growth during freezing and reducing ice recrystallization/promoting ice melting during thawing. Without adding any other cryoprotectants, FA can enhance the recovery of sheep red blood cells (RBCs) by three times as compared with a commercial cryoprotectant (hydroxyethyl starch) under a stringent test condition. Investigation of water mobility reveals that the ice-control properties of FA can be ascribed to its strong bondage to water molecules. Furthermore, we found that FA can be absorbed by RBCs and mainly locates on membranes, suggesting the possible contribution of FA to cell protection through stabilizing membranes. This work bespeaks a bright future for small-molecule cryoprotectants in non-vitreous cryopreservation application.

•

FA shows strong hydration ability

•

FA reduces ice growth/recrystallization and promotes ice melting

•

FA can be absorbed by RBCs and mainly locates on membranes

•

FA enables non-vitreous cellular cryopreservation

The effect of hydration and dehydration on the conformation, assembling behavior and photoluminescence of PBLG

Hydration and dehydration play crucial roles in hydrophobic effects (HEs) and are yet to be understood. Poly(γ-benzyl-L-glutamate) (PBLG) homopolymers in THF/water with various water contents were investigated. We discovered that PBLG was hydrated at low water contents and adopted a helical conformation. The chain became dehydrated with increasing water content, which converted the PBLG₁₀₀ helix to a PPII-helix. The variation in the conformation resulted in an alteration of the self-assembled morphologies from fibers to particles. For PBLG₁₂ with a shorter chain, the chain underwent an α-to-β transition in the conformation due to dehydration as the water content increased, and correspondingly the morphologies varied from tapes to helical ribbons, and eventually to toroids at a higher water content. We also observed that this α-to-β transition is accompanied by an increase in intensity of the fluorescence, which is attributed to the through-space-conjugation of tightly packed phenyl groups within the β-sheet. The discovered effect of hydration and dehydration on the PBLG chain conformation, self-assembling behavior and optical function is essential for the innovation of polypeptide materials and understanding of water-mediated biological systems.

Determination of non-freezing water in different nonfouling materials by differential scanning calorimetry

Nonfouling materials have attracted increasing interest for their excellent biocompatibility and low immunogenicity. Strong hydration is believed to be the key reason for their resisting capability to nonspecific protein adsorption. However, little attention has been paid to quantifying their strong water binding capacity. In this study, we synthesized four zwitterionic polymers, including poly(sulfobetaine methacrylate) (pSBMA), poly(carboxybetaine methacrylate) (pCBMA), poly(carboxybetaine acrylamide) (pCBAA) and poly(2-methacryloyloxyethyl phosphorylcholine) (pMPC), and compared non-freezing water of these zwitterionic polymers with typical antifouling polymer poly(ethylene glycol) (PEG) using differential scanning calorimetry (DSC). Non-freezing water of their monomers was also investigated. The non-freezing water of the polymers (per unit) is pMPC (10.7 ± 1.4) ≈ pCBAA (10.8 ± 1.5) > pCBMA (9.0 ± 0.6) > pSBMA (6.6 ± 0.4) > PEG20000 (0.60 ± 0.04). Similar trend is observed for their monomers. For all studied zwitterionic materials, they showed higher binding capacity than PEG. We attribute the stronger hydration of zwitterionic polymers to their strong electrostatic interactions.

Forward-Looking Roadmaps for Long-Term Continuous Water Quality Monitoring: Bottlenecks, Innovations, and Prospects in a Critical Review

Long-term continuous monitoring (LTCM) of water quality can bring far-reaching influences on water ecosystems by providing spatiotemporal data sets of diverse parameters and enabling operation of water and wastewater treatment processes in an energy-saving and cost-effective manner. However, current water monitoring technologies are deficient for long-term accuracy in data collection and processing capability. Inadequate LTCM data impedes water quality assessment and hinders the stakeholders and decision makers from foreseeing emerging problems and executing efficient control methodologies. To tackle this challenge, this review provides a forward-looking roadmap highlighting vital innovations toward LTCM, and elaborates on the impacts of LTCM through a three-hierarchy perspective: data, parameters, and systems. First, we demonstrate the critical needs and challenges of LTCM in natural resource water, drinking water, and wastewater systems, and differentiate LTCM from existing short-term and discrete monitoring techniques. We then elucidate three steps to achieve LTCM in water systems, consisting of data acquisition (water sensors), data processing (machine learning algorithms), and data application (with modeling and process control as two examples). Finally, we explore future opportunities of LTCM in four key domains, water, energy, sensing, and data, and underscore strategies to transfer scientific discoveries to general end-users.

Unraveling Amphiphilic Poly(N-vinylcaprolactam)/Water Interface by Nuclear Magnetic Resonance Relaxometry: Control of Clathrate Hydrate Formation Kinetics

Water-soluble amphiphilic polymers are vital chemicals in the oil and gas industry to retard crystal growth of hydrocarbon hydrate via surface adsorption and suppress nucleation of a pristine hydrate nucleus, thereby preventing formation of hydrate blockages in flow lines during oil and natural gas production. Apart from a few theoretical modeling studies, an experimental method to study the polymer/water interface in the crystal growth is critically needed. Here, water motions in the hydration shells of an exemplary kinetic inhibitor, poly(N-vinylcaprolactam), during hydrate formation from the tetrahydrofuran/water system are revealed via nuclear magnetic resonance relaxometry. Unequivocal experiments show that the pivotal interfacial water in the tightly bound state gradually freezes at rates depending on the polymer molecular weight (MW). This is supported by nonfreezable water analysis, which is correlated to the inhibition time. The polymers tune the kinetics of the hydration process via interaction with and perturbation of the water molecules. The free water component in the polymer solution crystallizes at a very slow rate when in partially restricted mobility, whereas the bound water component increases in the reaction, with the polymer/water interface serving as the reaction sites. The appropriate MW (including average MW and polydispersity values) of the inhibitive polymers can give rise to maximal retardation of the hydrate crystal growth. This work will help control other multiphase crystallization kinetic processes through the design of inhibitors or promoters functioning in the interface.

Novel dopamine-modified cellulose acetate ultrafiltration membranes with improved separation and antifouling performances

Cellulose acetate (CA) is widely used in the preparation of ultrafiltration membranes due to its many excellent characteristics, especially chemical activity and biodegradability. To improve the inherent hydrophobic and antifouling properties of CA membrane, in this work, CA was successfully modified with dopamine (CA-2,3-DA) through selective oxidation and Schiff base reactions, which was confirmed by FTIR and ¹H NMR measurements. Then, CA-2,3-DA membrane with high water permeability and excellent antifouling property was prepared by the phase inversion method. Compared with the original CA membrane, the CA-2,3-DA membrane maintained a higher rejection ratio for BSA (92.5%) with a greatly increased pure water flux (167.3 L m^-2 h^-1), which could overcome the trade-off between permeability and selectivity of the traditional CA membrane to a certain extent. According to static protein adsorption and three-cycle dynamic ultrafiltration experiments, the CA-2,3-DA membrane showed good antifouling performance and superior long-term performance stability, as supported by the experimental results, including flux recovery ratio, flux decline ratio, and filtration resistance. It is expected that this approach can greatly expand the high-value utilization of modified natural organic polysaccharides in separation engineering.

Coordination-Driven Surface Zwitteration for Antibacterial and Antifog Applications

The enhancement of surface wettability by hydrophilic polymer coatings has been of great interest because it has been used to address several technical challenges such as biofouling and surface fogging. Among the hydrophilic polymers, zwitterionic polymers have been extensively utilized to coat solid surfaces due to their excellent capability to bind water molecules, thereby forming dense hydration layers on the solid surfaces. For these zwitterionic polymers to function appropriately on the solid surfaces, techniques for fixing polymers onto the solid surface with high efficiency are required. Herein, we report a new approach to graft zwitterionic polymers onto solid substrates. The approach is based on the mussel-inspired surface chemistry and metal coordination. It consists of polydopamine coating and the coordination-driven grafting of the zwitterionic polymers. Polydopamine coating enables the versatile surface immobilization of catechols. Zwitterionic polymers are then easily fixed onto the catechol-immobilized surface by metal-mediated crosslinking reactions. Using this approach, nanometer-thick zwitterionic polymer layers that are highly resistant to bacterial adhesion and fog generation could be successfully fabricated on solid substrates in a substrate-independent manner.

Kinetic Inhibition of Clathrate Hydrate by Copolymers Based on N-Vinylcaprolactam and N-Acryloylpyrrolidine: Optimization Effect of Interfacial Nonfreezable Water of Polymers

Amphiphilic polymers have now been designed to achieve an icephobic performance and have been used for ice adhesion prevention. They may function by forming a strongly bonded but nonfreezable water shell which serves as a self-lubricating interfacial layer that weakens the adhesion strength between ice and the surface. Here, an analogous concept is built to prevent the formation of clathrate hydrate compounds during oil and natural gas production, in which amphiphilic water-soluble polymers act as efficient kinetic hydrate inhibitors (KHIs). A novel group of copolymers with N-vinylcaprolactam and N-acryloylpyrrolidine structural units are investigated in this study. The relationships among the amphiphilicity, lower critical solution temperature, nonfreezable bound water, and kinetic hydrate inhibition time are analyzed in terms of the copolymer compositions. Low-field NMR relaxometry revealed the crucial interfacial water in tightly bound dynamic states which led to crystal growth rates changing with the copolymer compositions, in accord with the rotational rheometric analysis results. The nonfreezable bound water layer confirmed by a calorimetry analysis also changes with the polymer amphiphilicity. Therefore, in the interface between the KHI polymers and hydrate, water surrounding the polymers plays a critical role by helping to delay the nucleation and growth of embryonic ice/hydrates. Appropriate amphiphilicity of the copolymers can achieve the optimal interfacial properties for slowing down hydrate crystal growth.

Recent Advances in Zwitterionic Hydrogels: Preparation, Property, and Biomedical Application

Nonspecific protein adsorption impedes the sustainability of materials in biologically related applications. Such adsorption activates the immune system by quick identification of allogeneic materials and triggers a rejection, resulting in the rapid failure of implant materials and drugs. Antifouling materials have been rapidly developed in the past 20 years, from natural polysaccharides (such as dextran) to synthetic polymers (such as polyethylene glycol, PEG). However, recent studies have shown that traditional antifouling materials, including PEG, still fail to overcome the challenges of a complex human environment. Zwitterionic materials are a class of materials that contain both cationic and anionic groups, with their overall charge being neutral. Compared with PEG materials, zwitterionic materials have much stronger hydration, which is considered the most important factor for antifouling. Among zwitterionic materials, zwitterionic hydrogels have excellent structural stability and controllable regulation capabilities for various biomedical scenarios. Here, we first describe the mechanism and structure of zwitterionic materials. Following the preparation and property of zwitterionic hydrogels, recent advances in zwitterionic hydrogels in various biomedical applications are reviewed.

Regulating the morphology and size of homopolypeptide self-assemblies via selective solvents

It remains a great challenge to control the morphology and size of self-assembled homopolypeptide aggregates. In this work, rod-like micelles including spindles and cylinders were prepared by a solution self-assembly of poly(γ-benzyl-l-glutamate) (PBLG) homopolypeptides with different degrees of polymerization, in which their size was controlled precisely by tuning the ratio of water/methanol in selective cosolvents. The length of the rod-like micelles increased with an increasing amount of methanol in the selective cosolvents, which was confirmed using the combination of SEM, TEM and AFM. The self-assembly mechanism of PBLG in selective cosolvents was investigated by using complementary Fourier transform infrared (FT-IR), circular dichroism (CD) and low-field NMR analyses. It was found that the shrinkage and swelling of PBLG chains play important roles in the self-assembly process. The obtained results may provide a guideline for the study of regulating the assembled aggregate sizes.

Bioinspired Crowding Inhibits Explosive Ice Growth in Antifreeze Protein Solutions

Antifreeze (glyco)proteins (AF(G)Ps) are naturally evolved ice inhibitors incomparable to any man-made materials, thus, they are gaining intensive interest for cryopreservation and beyond. AF(G)Ps depress the freezing temperature (T_f) noncolligatively below the melting temperature (T_m), generating a thermal hysteresis (TH) gap, within which the ice growth is arrested. However, the ice crystals have been reported to undergo a retaliatory and explosive growth beyond the TH gap, which is lethal to living organisms. Although intensive research has been carried to inhibit such an explosive ice growth, no satisfactory strategy has been discovered until now. Here, we report that crowded solutions mimicking an extracellular matrix (ECM), in which AF(G)Ps are located, can completely inhibit the explosive ice growth. The crowded solutions are the condensates of liquid-liquid phase separation consisting of polyethylene glycol (PEG) and sodium citrate (SC), which possess a nanoscale network and strong hydrogen bond (HB) forming ability, completely different to crowded solutions made of single components, that is, PEG or SC. Due to these unique features, the dynamics of the water is significantly slowed down, and the energy needed for breaking the HB between water molecules is distinctly increased; consequently, ice growth is inhibited as the rate of water molecules joining the ice is substantially reduced. The present work not only opens a new avenue for cryopreservation, but also suggests that the ECM of cold-hardy organisms, which also exhibit great water confining properties, may have a positive effect in protecting the living organisms from freezing damage.

Machine Learning-Enabled Design and Prediction of Protein Resistance on Self-Assembled Monolayers and Beyond

The rational design of highly antifouling materials is crucial for a wide range of fundamental research and practical applications. The immense variety and complexity of the intrinsic physicochemical properties of materials (i.e., chemical structure, hydrophobicity, charge distribution, and molecular weight) and their surface coating properties (i.e., packing density, film thickness and roughness, and chain conformation) make it challenging to rationally design antifouling materials and reveal their fundamental structure-property relationships. In this work, we developed a data-driven machine learning model, a combination of factor analysis of functional group (FAFG), Pearson analysis, random forest (RF) and artificial neural network (ANN) algorithms, and Bayesian statistics, to computationally extract structure/chemical/surface features in correlation with the antifouling activity of self-assembled monolayers (SAMs) from a self-construction data set. The resultant model demonstrates the robustness of Q_CV² = 0.90 and RMSE_CV = 0.21 and the predictive ability of Q_ext² = 0.84 and RMSE_ext = 0.28, determines key descriptors and functional groups important for the antifouling activity, and enables to design original antifouling SAMs using the predicted antifouling functional groups. Three computationally designed molecules were further coated onto the surfaces in different forms of SAMs and polymer brushes. The resultant coatings with negative fouling indexes exhibited strong surface resistance to protein adsorption from undiluted blood serum and plasma, validating the model predictions. The data-driven machine learning model demonstrates their design and predictive capacity for next-generation antifouling materials and surfaces, which hopefully help to accelerate the discovery and understanding of functional materials.

Zwitterionic self-assembled nanoparticles as carriers for Plasmodium targeting in malaria oral treatment

The current decline in antimalarial drug efficacy due to the evolution of resistant Plasmodium strains calls for new strategies capable of improving the bioavailability of antimalarials, especially of those whose lipophilic character imparts them a low solubility in biological fluids. Here we have designed, synthesized and characterized amphiphilic zwitterionic block copolymers forming nanoparticles capable of penetrating the intestinal epithelium that can be used for oral administration. Poly(butyl methacrylate-co-morpholinoethyl sulfobetaine methacrylate) (PBMA-MESBMA)-based nanoparticles exhibited a specific targeting to Plasmodium falciparum-infected vs. parasite-free red blood cells (74.8%/0.8% respectively), which was maintained upon encapsulation of the lipophilic antimalarial drug curcumin (82.6%/0.3%). The in vitro efficacy of curcumin upon encapsulation was maintained relative to the free compound, with an IC50 around 5 μM. In vivo assays indicated a significantly increased curcumin concentration in the blood of mice one hour after being orally fed PBMA-MESBMA-curcumin in comparison to the administration of free drug (18.7 vs. 2.1 ng/ml, respectively). At longer times, however, plasma curcumin concentration equaled between free and encapsulated drug, which was reflected in similar in vivo antimalarial activities in Plasmodium yoelii yoelii-infected mice. Microscopic analysis in blood samples of fluorescently labeled PBMA-MESBMA revealed the presence of the polymer inside P. yoelii yoelii-parasitized erythrocytes one hour after oral administration to infected animals.

Synthesis of papain–polyacrylamide hydrogel microspheres and their catalytic application

A schematic of the formation process of papain–PAHMs.

Effect of Polyol Molecular Structure on Fluidity, Surface Tension, and Printed Pattern Sharpness of Disperse Dye Inks

In the present study, density functional theory (DFT) has been used in simulating and calculating the molecular geometries of differently structured polyols (within a water phase), as well as the weak interactions between these polyols and the water molecules. Furthermore, low field nuclear magnetic resonance (LF-NMR) has been used in studying the transverse relaxation times of different polyols, in addition to their (20.00 wt %) fluidity in an aqueous environment. Moreover, the influence of polyols, with different molecular structures, on the ink fluidity, was also explored. A bubble pressure tensiometer was also used to characterize the surface tension of the aqueous polyol (20.00 wt %) solution, the sodium dodecyl sulfate (SDS, 0.50 wt %) solution, and the ink. This was made to clarify the influence of polyol and SDS on the surface tension of ink. In addition, the particle size, zeta potential, pH value, viscosity, and rheological properties of the ink, were also investigated. The resulting data showed that polyols have certain effects on the particle size, stability, and viscosity of the ink. The jetting performances of different polyol inks were, under certain conditions of the inkjet drive waveform, also explored. The results showed that the fluidity, viscosity, and surface tension of the ink will render a certain influence on the inkjet performances. The prepared polyol ink was thereafter used for polyester fabric printing, and the contour sharpness and color fastness of the printed fabric were accordingly evaluated. The data showed that the increase in ink viscosity, and decrease in fluidity, promote the improvement in contour sharpness. In addition, the printed fabric demonstrated an excellent color fastness.

Rational Design of PMPC/PDMC/PEGDA Hydrogel Micropatterns onto Polylactic Acid with Enhanced Biological Activity

Polylactic acid (PLA) is one of the biodegradable materials that has been used in the areas of surgical healing lines, cancer treatment, and wound healing. However, the application of PLA is still rather limited due to its high hydrophobicity and poor antibacterial activity. In order to enhance the antifouling and antibacterial performances of PLA, here we modified the surface of PLA with various sizes of hydrogel micropatterns in negative or positive mode using plasma treatment, the photomask technique, and UV-graft polymerization. The hydrogel micropatterns consist of poly(ethylene glycol) diacrylate (PEGDA), poly(2-methacryloyloxyethylphosphorylcholine) (PMPC), and poly(methacryloyloxyethyltrimethylammonium chloride) (PDMC). Compared to PLA, the patterned PLA (PLA-PMPC/PDMC/PEGDA) shows obviously enhanced antifouling and antibacterial activities. For PLA-PMPC/PDMC/PEGDA with either positive or negative micropatterns, the antifouling and antibacterial properties are gradually increasing with decreasing the size of micropatterns. Compared with PLA-PMPC/PDMC/PEGDA bearing positive and negative micropatterns in the same size, the PLA-PMPC/PDMC/PEGDA with negative micropatterns exhibits slightly better biological activity and the PLA-PMPC/PDMC/PEGDA with 3 μm negative hydrogel micropatterns shows the best hydrophilicity, antifouling, and antibacterial properties. Combining the in vitro hemolysis assay, cytotoxicity, water absorption test, and degradation test results, it is suggested that the fabrication of hydrogel micropatterns onto the PLA surface could significantly improve biological activities of PLA. We expect that this work would provide a new strategy to potentially develop PLA as a promising wound dressing.

Stabilizing Coacervate by Microfluidic Engulfment Induced by Controlled Interfacial Energy

Low interfacial energy, an intrinsic property of complex coacervate, enables the complex coacervate to easily encapsulate desired cargo substances, making it widely used in encapsulation applications. Despite this advantage, the low interfacial energy of the complex coacervate makes it unstable against mechanical mixing, and changes in pH and salt concentration. Hence, a chemical cross-linker is usually added to enhance the stability of the complex coacervate at the expense of sacrificing all intrinsic properties of the coacervate, including phase transition of the coacervate from liquid to solid. In this study, we observed an abrupt increase in the interfacial energy of the coacervate phase in mineral oil. By controlling the interfacial energy of the coacervate phase using a microfluidic device, we successfully created double engulfed PEG-diacrylate (PEGDA) coacervate microparticles, named DEPOT, in which the coacervate is engulfed in a cross-linked PEGDA shell. The engulfed coacervate remained as a liquid phase, retained its original low interfacial energy property to encapsulate the desired cargo substances, and infiltrated into the target site by a simple solvent exchange from oil to water.

Heterogeneous ice nucleation correlates with bulk-like interfacial water

Establishing a direct correlation between interfacial water and heterogeneous ice nucleation (HIN) is essential for understanding the mechanism of ice nucleation. Here, we study the HIN efficiency on polyvinyl alcohol (PVA) surfaces with different densities of hydroxyl groups. We find that the HIN efficiency increases with the decreasing hydroxyl group density. By explicitly considering that interfacial water molecules of PVA films consist of "tightly bound water," "bound water," and "bulk-like water," we reveal that bulk-like water can be correlated directly to the HIN efficiency of surfaces. As the density of hydroxyl groups decreases, bulk-like water molecules can rearrange themselves with a reduced energy barrier into ice due to the diminishing constraint by the hydroxyl groups on the PVA surface. Our study not only provides a new strategy for experimentally controlling the HIN efficiency but also gives another perspective in understanding the mechanism of ice nucleation.

Molecular Dynamics Simulation of the Effect of Carbon Space Lengths on the Antifouling Properties of Hydroxyalkyl Acrylamides

Surface hydration has been proposed as the key antifouling mechanism of antifouling materials. However, molecular-level details of the structure, dynamics, and interactions of interfacial water around antifouling polymers still remain elusive. In this work, using all-atom molecular dynamics (MD) simulations, we studied four different acrylamides (AMs) for their interfacial water behaviors and their interactions with a protein, with special attention to the effect of carbon spacer lengths (CSLs) on the hydration properties of AMs. Collective MD simulation data revealed that although all four AMs displayed strong hydration, N-hydroxymethyl acrylamide (HMAA) and N-(2-hydroxyethyl)acrylamide (HEAA) with shorter CSLs displayed a longer residence time, slower self-diffusion, and lower coordination number of interfacial water molecules than N-(3-hydroxypropyl)acrylamide (HPAA) and N-(5-hydroxypentyl)-acrylamide (HPenAA) with longer CSLs. The shorter CSLs allow water molecules to form bridging hydrogen bonds with different hydrophilic groups in the same AM chain, thus enhancing the hydration capacity of AMs. Consequently, different from HPenAA, which had a weak but detectable interaction with the protein, HMAA, HEAA, and HPAA had almost zero interactions with the protein. This computational work provides a better fundamental understanding of the surface hydration and protein interaction of different AMs with subtle structural changes from structural, dynamic, and energy aspects at the atomic level, which hopefully will guide the design of new and effective nonfouling materials.

Simple Thermal Pretreatment Strategy to Tune Mechanical and Antifouling Properties of Zwitterionic Hydrogels

Zwitterionic hydrogels are promising biomaterials because of their high water content, three-dimensional network structure, and antifouling property. However, it still remains unclear about how mechanical properties of zwitterionic hydrogels affect their antifouling property. In this work, we propose a simple, thermal-pretreatment method to fabricate poly(sulfobetaine methacrylate) (pSBMA) hydrogels with varied mechanical properties that can be readily tuned by thermal pretreatment time and cross-linker density, as well as to correlate their mechanical property with antifouling property. The resulting thermal-treated pSBMA hydrogels show significantly enhanced mechanical properties with tunable compressive modulus and elastic modulus as compared to the untreated hydrogels. A combination of ELISA investigations and short-term cell adhesion assays also confirm that pSBMA hydrogels exhibit superior antifouling properties to resist protein adsorption and cell adhesion. Further analysis shows a linear inversion correlation between elastic modulus and protein adsorption of pSBMA hydrogels, i.e., the hydrogel with the higher elastic modulus exhibits the lower protein adsorption (the better antifouling property). This work not only provides a simple thermal-pretreatment strategy for fabricating pSBMA hydrogels, but also demonstrates multifunctional properties of the pSBMA hydrogels, which possess a great potential to fulfill some biomedical applications.