Synthesis and characterization of γ-Fe2O3/carbon hybrids and their application in removal of hexavalent chromium ions from aqueous solutions

A two-sorbent system for fast uptake of arsenate from water: Batch and column studies

There is a critical need to use decentralized and/or point-of-use systems to address some challenging water quality issues in society. Sorption-based approaches are uniquely suitable for such applications because of their simplicity in operation; however, the sorbents must possess fast contaminant uptake kinetics to overcome short hydraulic contact times often encountered in small systems. Here we designed a two-sorbent system consisting of Fe₂O₃-coated mesoporous carbon (FeMC) and nano-Fe₂O₃-coated activated carbon (FeAC) and demonstrated its ability to remove arsenate with a < 1 min empty bed contact time (EBCT) by a capture-and-storage process. Batch experiments showed rapid capture of arsenate by FeMC, likely occurred on the rod-like structures protruding to the liquid film. The captured arsenate could subsequently be relocated to FeAC for storage, which had a higher apparent sorption capacity. Column studies, operated with a 10 h running time followed by a 14 h pump-off time, showed that with a 102 μg-As/L influent concentration and at 0.85 min EBCT, the column treated 20,022 bed volumes until the 10 μg-As/L breakthrough, corresponding to a sorption density of 2.36 mg-As/g. This capture-and-storage technique resulted in a rapid and high-capacity arsenate removal through a combined effect of facile access to sorption sites on one sorbent and dynamic equilibrium in the two-sorbent system possessing a large total sorption capacity.

Use of a Hybrid Porous Carbon Material Derived from Expired Polysaccharides Snack/Iron Salt Exhibiting Magnetic Properties, for Hexavalent Chromium Removal

Nowadays, the scientific interest is focused more and more on the development of new strategies in recycling of waste products as well as on the development of clean technologies due to the increased environmental pollution. In this work we studied the valorization of an expired cheese-tomato flavor corn snack, which is polysaccharide food product, by producing advanced hybrid magnetic materials for environmental remediation purposes. The carbonization-chemical activation of this snack using potassium hydroxide leads to a microporous activated carbon with high surface area (SgBET ~800 m2/g). The magnetic hybrid material was synthesized via an in-situ technique using iron acetate complex as the precursor to produce iron based magnetic nanoparticles. The resulting material retains a fraction of the microporous structure with surface area SgBET ~500 m2/g. Such material consists, of homogenously dispersed magnetic isolated zero valent iron nanoparticles and of iron carbides (Fe3C), into the carbon matrix. The magnetic carbon exhibited high adsorption capacity in Cr(VI) removal applications following a pseudosecond order kinetic model. The maximum adsorption capacity was 88.382 mgCr(VI)/gAC at pH = 3. Finally, oxidation experiments, in combination with FT-IR, Mössbauer, and VSM measurements indicated that the possible Cr6+ removal mechanism involves oxidation of iron phases and reduction of Cr6+ to Cr3+.

Superparamagnetic Iron Oxide Nanoparticle Nanodevices Based on Fe3O4 Coated by Megluminic Ligands for the Adsorption of Metal Anions from Water

The uptake ability toward arsenic(V), chromium(VI), and boron(III) ions of ad hoc functionalized magnetic nanostructured devices has been investigated. To this purpose, ligands based on meglumine have been synthesized and used to coat magnetite nanoparticles (Fe₃O₄) obtained by the co-precipitation methodology. The as-prepared hybrid material was characterized by infrared spectroscopy (IR), X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy combined with energy-dispersive X-ray analysis. Moreover, its magnetic hysteresis properties were measured to evaluate its magnetic properties, and the adsorption kinetics and isothermal models were applied to discern between the different adsorption phenomena. Specifically, the better fitting was observed by the Langmuir isotherm model for all metal ions tested, highlighting a higher uptake in arsenic (28.2 mg/g), chromium (12.3 mg/g), and boron (23.7 mg/g) sorption values if compared with other magnetic nanostructured materials. After adsorption, an external magnetic stimulus can be used to efficiently remove nanomaterials from the water. Finally the nanomaterial can be reused up to five cycles and regenerated for another three cycles.

Meso- and macroporous silica-based arsenic adsorbents: effect of pore size, nature of the active phase, and silicon release

Arsenic pollution in ground and drinking water is a major problem worldwide due to the natural abundance of arsenic by dissolution from ground sediment or mining activities from anthropogenic activities. To overcome this issue, iron oxides as low-cost and non-toxic materials, have been widely studied as efficient adsorbents for arsenic removal, including when dispersed within porous silica supports. In this study, two head-to-head comparisons were developed to highlight the As(v)-adsorptive ability of meso- and macrostructured silica-based adsorbents. First, the role of the textural properties of a meso-(SBA15) and macrostructured (MOSF) silica support in affecting the structural-morphological features and the adsorption capacity of the active phase (Fe2O3) have been studied. Secondly, a comparison of the arsenic removal ability of inorganic (Fe2O3) and organic (amino groups) active phases was carried out on SBA15. Finally, since silica supports are commonly proposed for both environmental and biomedical applications as active phase carriers, we have investigated secondary silicon and iron pollution. The batch tests at different pH revealed better performance from both Fe2O3-composites at pH 3. The values of q m of 7.9 mg g-1 (53 mg gact -1) and 5.5 mg g-1 (37 mg gact -1) were obtained for SBA15 and MOSF, respectively (gact stands for mass of the active phase). The results suggest that mesostructured materials are more suitable for dispersing active phases as adsorbents for water treatment, due to the obtainment of very small Fe2O3 NPs (about 5 nm). Besides studying the influence of the pore size of SBA15 and MOSF on the adsorption process, the impact of the functionalization was analyzed on SBA15 as the most promising sample for As(v)-removal. The amino-functionalized SBA15 adsorbent (3-aminopropyltriethoxysilane, APTES) exhibited a q m of 12.4 mg g-1 and faster kinetics. Furthermore, issues associated with the release of iron and silicon during the sorption process, causing secondary pollution, were evaluated and critically discussed.

Designing of a nanoscale zerovalent iron@fly ash composite as efficient and sustainable adsorbents for hexavalent chromium (Cr(VI)) from water

The present study encompasses a unique concept involving the formation of core-shell particles with surface-activated fly ash (FA) as core and nanoscale zerovalent iron (nZVI) particles as shell, which not only imparts high adsorption efficiency for Cr(VI) but also contributes to fruitful utilization of FA while overcoming the drawbacks associated with ZVI nanoparticles (aggregation, rapid oxidation and less durability). The otherwise inert surface of FA has been modified and activated to achieve a uniform and stable layer of nZVI over FA. The functionalized particles were studied using FE-SEM/EDAX, HR-TEM, XRD and FT-IR studies for its physical, functional and morphological characteristics. The results indicate the strong adsorption ability of nZVI@FA particles, with 100% removal efficiency within 10 min at low initial concentrations of Cr(VI), which is appreciably higher than that of pure fly ash (26%) after 60 min of reaction. Besides, the so-formed structure of composite aids to improve its life, as the synthesized nZVI@FA particles could be efficiently regenerated and reused up to 5 subsequent adsorption-desorption cycles, which is in contrast with the ability of fly ash considering its low desorption potential. Hence, the composite material proves to be an effective and sustainable alternative for treatment of a waste using a waste.

Interactions of iron-based nanoparticles with soil dissolved organic matter: adsorption, aging, and effects on hexavalent chromium removal

The interactions and mechanisms between soil dissolved organic matter (DOM) and three types of iron-based nanoparticles (NPs), i.e., nanoscale zero-valent iron (nZVI) particles, Fe₂O₃ NPs, and Fe₃O₄ NPs, were investigated in short-term exposure experiments. The adsorption results showed that soil DOM was rapidly adsorbed on the surface of the iron-based NPs with the adsorption rate varying according to Fe₃O₄ > Fe₂O₃ > nZVI. Spectral analysis results revealed that aromatic DOM fractions with high-molecular-weights were preferentially adsorbed. The binding mechanism was determined as hydrogen bonding and ligand exchange via Fourier transform infrared spectroscopy (FT-IR) analysis. Scanning electron microscopy, FT-IR, X-ray photoelectron spectroscopy, and X-ray diffraction were used to identify the corrosion products of the three iron-based NPs at the adsorption equilibrium. The results suggest that Fe₃O₄ and/or γ-Fe₂O₃ and α-FeOOH were the main corrosion products of nZVIs and α-FeOOH was obtained as an aged product of Fe₃O₄ NPs. Results of Cr(VI) removal tests suggest that the aged nZVI achieved 79.87% of Cr(VI) removal and the Cr(VI) removal efficiency was significantly improved by coating DOM onto Fe₂O₃ NPs. The overall data indicate the fate and transformation of iron-based NPs and the enhancement for Cr(VI) removal after interactions between DOM and NPs.

Magnetic nanomaterials based electrochemical (bio)sensors for food analysis

It is widely accepted that nanotechnology attracted more interest because of various values that nanomaterial applications offers in different fields. Recently, researchers have proposed nanomaterials based electrochemical sensors and biosensors as one of the potent alternatives or supplementary analytical tools to the conventional detection procedures that consumes a lot of time. Among different nanomaterials, researchers largely considered magnetic nanomaterials (MNMs) for developing and fabricating the electrochemical (bio)sensors for numerous utilizations. Among several factors, healthier and higher quality foods are the most important preferences of consumers and manufacturers. For this reason, developing new techniques for rapid, precise as well as sensitive determination of components or contaminants of foods is very important. Therefore, developing the new electrochemical (bio)sensors in food analysis is one of the key and effervescent research fields. In this review, firstly, we presented the properties and synthesis strategies of MNMs. Then, we summarized some of the recently developed MNMs-based electrochemical (bio)sensors for food analysis including detecting the antioxidants, synthetic food colorants, pesticides, heavy metal ions, antibiotics and other analytes (bisphenol A, nitrite and aflatoxins) from 2010 to 2020. Finally, the present review described advantages, challenges as well as future directions in this field.

Tunable Magnetic Hyperthermia Properties of Pristine and Mildly Reduced Graphene Oxide/Magnetite Nanocomposite Dispersions

We present a study on the magnetic hyperthermia properties of graphene oxide/magnetite (GO/MNP) nanocomposites to investigate their heat production behavior upon the modification of the oxidation degree of the carbonaceous host. Avoiding the harsh chemical conditions of the regular in situ co-precipitation-based routes, the oppositely charged MNPs and GO nanosheets were combined by the heterocoagulation process at pH ~ 5.5, which is a mild way to synthesize composite nanostructures at room temperature. Nanocomposites prepared at 1/5 and 1/10 GO/MNP mass ratios were reduced by NaBH₄ and L-ascorbic acid (LAA) under acidic (pH ~ 3.5) and alkaline conditions (pH ~ 9.3). We demonstrate that the pH has a crucial effect on the LAA-assisted conversion of graphene oxide to reduced GO (rGO): alkaline reduction at higher GO loadings leads to doubled heat production of the composite. Spectrophotometry proved that neither the moderately acidic nor alkaline conditions promote the iron dissolution of the magnetic core. Although the treatment with NaBH₄ also increased the hyperthermic efficiency of aqueous GO/MNP nanocomposite suspensions, it caused a drastic decline in their colloidal stability. However, considering the enhanced heat production and the slightly improved stability of the rGO/MNP samples, the reduction with LAA under alkaline condition is a more feasible way to improve the hyperthermic efficiency of magnetically modified graphene oxides.

Preparation, characterization, and application of magnetic activated carbon for treatment of biologically treated papermaking wastewater

In view of the urgent need for tertiary treatment of papermaking wastewater and the difficulty in separating powdered activated carbon (PAC) from water, the magnetic activated carbon (33%-MPAC, 50%-MPAC and 67%-MPAC) were prepared by chemical coprecipitation method for adsorption of biologically treated papermaking wastewater (BTPW). A series of characterization of MPAC and PAC were carried out and show that the content of iron oxides is negatively related to the proportion of micropores in MPAC. The loaded iron oxides is mainly the mixture of magnetite and maghemite, and the maximum saturation magnetization of MPAC can reach 29.68 emu/g. Batch mode experiments were performed, and found that the adsorption effect of MPAC is slightly worse than that of PAC, the adsorption capacity of COD in MPAC can reach about 65 mg/g, and pH = 2 and 10 °C are more favorable for adsorption. The adsorption isotherms and kinetics were well fitted by the Freundlich model and pseudo-second-order kinetic model, respectively. The selective adsorption was studied by using the excitation emission matrix (EEM) fluorescence spectrum and high-performance size exclusion chromatography (HPSEC). It is concluded that all adsorbents are preferred to adsorb humic acid-like substances (HA). And all adsorbents are preferred to adsorb low apparent molecular weight substances (LAMW, AMW < 1500 Da), with the increase of iron oxides content, the phenomenon of MPAC preferentially adsorbed LAMW became less obvious.

Functional Carbon Materials Derived through Hypergolic Reactions at Ambient Conditions

Carbon formation from organic precursors is an energy-consuming process that often requires the heating of a precursor in an oven at elevated temperature. In this paper, we present a conceptually different synthesis pathway for functional carbon materials based on hypergolic mixtures, i.e., mixtures that spontaneously ignite at ambient conditions once its ingredients contact each other. The reactions involved in such mixtures are highly exothermic, giving-off sizeable amounts of energy; hence, no any external heat source is required for carbonization, thus making the whole process more energy-liberating than energy-consuming. The hypergolic mixtures described here contain a combustible organic solid, such as nitrile rubber or a hydrazide derivative, and fuming nitric acid (100% HNO₃) as a strong oxidizer. In the case of the nitrile rubber, carbon nanosheets are obtained, whereas in the case of the hydrazide derivative, photoluminescent carbon dots are formed. We also demonstrate that the energy released from these hypergolic reactions can serve as a heat source for the thermal conversion of certain triazine-based precursors into graphitic carbon nitride. Finally, certain aspects of the derived functional carbons in waste removal are also discussed.

Metal-Organic Frameworks Bearing Dense Alkyl Thiol for the Efficient Degradation and Concomitant Removal of Toxic Cr(VI)

Highly efficient removal of toxic Cr(VI) from aqueous media remains a crucial concern for ecosystem protection and public health. Herein, we demonstrated a new approach to solve this issue by constructing alkyl thiol-containing Zr-based metal-organic framework (MOF) adsorbents using simple and inexpensive mercaptosuccinic acid (MSA) and meso-dimercaptosuccinic acid (DMSA) as ligands. These chemically stable MOFs could be prepared in an uncomplicated, green, cost-effective, and scalable way. The interaction mechanism between alkyl thiol groups in MOFs and Cr(VI) was investigated in detail. Thanks to the formation of a Cr(VI)-thiolate complex and the oxidation of thiol groups, these designed MOFs not only exhibited high Cr(VI) adsorption capacities (202.0 and 138.7 mg/g for Zr-MSA and Zr-DMSA, respectively) but also displayed the immobilization ability for concomitant resultant Cr(III). Even in the presence of high concentrations of possibly coexistent interfering ions, the thiol-containing MOFs can still work effectively to decontaminate the Cr(VI) species. In addition, the strategy of introducing thiol groups into MOFs for Cr(VI) reduction and concomitant Cr(III) immobilization is universal for other MOFs, as verified by thiol-containing UiO-66 and MOF-808 prepared by a one-pot method. Therefore, our work not only produces several effective Cr(VI) adsorbents but also sets a general guideline for the construction of Cr(VI) adsorbents by introducing thiol groups into porous materials.

Preparation of NH2-Functionalized Fe2O3 and Its Chitosan Composites for the Removal of Heavy Metal Ions

NH2-Fe2O3 and NH2-Fe2O3/chitosan (NH2-Fe2O3/CS) with excellent physical properties and high adsorption capacities for several heavy metal ions were synthesized using a one-pot hydrothermal method. The materials were characterized by scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Physicochemical properties were determined by the Fourier transform infrared spectra (FTIR) and nitrogen adsorption analysis (Brunauer–Emmett–Teller (BET) method). The results of the characterization studies show that the material is uniformly dispersed and has good crystallinity and well-defined porous particles. The material is mesoporous, and the particles have a specific surface area of 55.41–233.03 m2·g−1, a total pore volume of 0.24–0.54 cm3·g−1, and a diameter of 3.83–17.56 nm. Additional results demonstrate that NH2-Fe2O3 and NH2-Fe2O3/CS are effective adsorbents for the removal of heavy metal ions from solution. In a ternary system, the order of their selective adsorption was determined to be Pb(II) > Cu(II) > Cd(II), and the adsorption rate of Pb(II) was much higher than that of Cu(II) and Cd (II). The metal ion adsorption capacity of NH2-Fe2O3 and NH2-Fe2O3/CS makes them promising adsorbents for wastewater cleanup.

One-step synthesis of Fe2O3 nano-rod modified reduced graphene oxide composites for effective Cr(vi) removal: removal capability and mechanism

Reduced graphene oxide (rGO) supported Fe2O3 nanorod composites were prepared via a one-step hydrothermal method and further utilized for hexavalent chromium (Cr(vi)) removal from aqueous environments. The composite material exhibited an excellent removal efficiency for chromium (47.28 mg L-1), which was attributed to the electrostatic attraction and chemical reduction of chromium by the material. The removal mechanism was studied by SEM, BET, XPS, and FTIR. The results demonstrated that rGO was successfully modified by Fe2O3 nanorods (approximately 50 nm wide). Compared with graphene oxide (GO), the compound was much more easily separated from the solution after completing the removal. Furthermore, XPS characterization showed that Cr(vi) could also be reduced to low-toxicity Cr(iii) by hydroxyl groups. In the variables test, it was found that the removal process was pH-dependent. The results of the designed experiments for exploring the adsorption kinetics, isotherms and thermodynamics indicated that the removal process obeyed a pseudo-second-order kinetics model, Langmuir isotherm model and that it was a spontaneous exothermal process. This study provides the possibility of hydrothermal synthesis of Fe2O3/rGO for use as an excellent material to remove Cr(vi) from aqueous environments.

Surface functionalization of MIL-101(Cr) by aminated mesoporous silica and improved adsorption selectivity toward special metal ions

Developing novel solid adsorbents with high efficiency and excellent selectivity is always an important target in the removal of toxic metal ions from waste water.

Strong chromate-adsorbent based on pyrrolic nitrogen structure: An experimental and theoretical study on the adsorption mechanism

Chromate is considered a toxic contaminant in various water sources because it poses a risk to animal and human health. To meet the stringent limits for chromium in water and wastewater, pyrrolic nitrogen structure was investigated as a chromate adsorbent for aqueous solutions, employing a polypyrrole coating on carbon black. The characteristics of the adsorbent were analyzed by high-resolution transmission electron microscopy, energy-filtered transmission electron microscopy, and X-ray photoelectron spectroscopy. Chromate was adsorbed as both Cr(III) and Cr(VI). The chromate adsorption capacity increased (from 50.84 to 174.81 mg/g) with increasing amounts of pyrrole monomers (from 50 to 86%) in the adsorbent. The adsorption capacity was well-correlated with the pyrrolic nitrogen content (from 2.06 to 6.57 at%) in the adsorbent, rather than other types of nitrogen. The optimized adsorption capacity (174.81 mg/g in the equilibrium batch experiment and 211.10 mg/g at an initial pH of 3) was far superior to those of conventional adsorbents. We investigated the mechanism behind this powerful chromate adsorption on pyrrolic nitrogen via physical/chemical analyses of the pH-dependent adsorption behavior, supported by first-principles calculation based on density functional theory. We found that Cr(III) and Cr(VI) adsorption followed different reaction paths. Cr(III) adsorption occurred in two sequential steps: 1) A Jones oxidation reaction (JOR)-like reaction of Cr(VI) with pyrrolic N that generates Cr(III), and 2) Cr(III) adsorption on the deprotonated pyrrolic N through Cr(III)-N covalent bonding. Cr(VI) adsorption followed an alternative path: hydrogen-bonding to the deprotonation-free pyrrolic N sites. The pH-dependent fractional deprotonation of the pyrrolic N sites by the JOR-like reaction in the presence of chromate played an important role in the adsorption.

The effect of low-molecular-weight organic-acids (LMWOAs) on treatment of chromium-contaminated soils by compost-phytoremediation: Kinetics of the chromium release and fractionation

A soil-plant biological system was developed from chromium (Cr) polluted soil treated by the compost-phytoremediation method. The transformation and migration of the Cr in this system is comprehensively studied in this research. The results illustrated that the co-composting treatment can reduce the Cr availability from 39% (F1 was about 31% of total, F2 was about 8% of total) to less than 2% by stabilizing the Cr. However, herbaceous plants can accumulate the concentrations of Cr from 113.8 to 265.2mg/kg in the two crops, even though the concentration of soluble Cr in the substrate soil was below 0.1mg/L. Cr can be assimilated and easily transferred in the tissues of plants because the low-molecular-weight organic-acids (LMWOAs) derived from the plant root increase the bioavailability of Cr. The amount of extracted Cr dramatically increased when the organic acids were substituted in this order: citric acid>malic acid>tartaric acid>oxalic acid>acetic acid. On average the maximum (147.4mg/kg) and the minimum (78.75mg/kg) Cr were extracted by 20mmol/L citric acid and acetic acid, respectively. The desorption of Cr in different acid solutions can be predicted by the pseudo second-order kinetics. The exchangeable Cr, carbonate-bound Cr, and residual Cr decreased, while Fe-Mn oxide bound Cr and organic bound Cr increased in the soil solid phase. According to the experimental results, the organic acids will promote the desorption and chelation processes of Cr, leading to the remobilization of Cr in the soil.

Chitosan-sodium alginate multilayer membrane developed by Fe0@WO3 nanoparticles: Photocatalytic removal of hexavalent chromium

The WO₃ nanostructures were modified by doping with iron and then the polyethersulfone (PES) ultrafiltration (UF) membrane was developed using prepared Fe⁰-doped WO₃ photocatalytic nanoparticles via layer by layer technology. According to UV-vis diffuse reflectance spectroscopy (UV-vis/DRS) characterization, the photocatalytic activity of WO₃ nanoparticles could be improved by doping with Fe impurity. The prepared membranes were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and contact angle analyzer. The novel photocatalytic membranes were used in removal of hexavalent chromium (Cr(VI)) ions in batch mode as well as filtration system. The novel photocatalytic membranes have shown significant Cr(VI) ions removal under visible-light illumination. By depositing the (CHI-ALG)_3.5 bilayers on the PES/UF membrane surface, the Cr(VI) rejection for 5, 25 and 50 mg/l feed concentration were enhanced from 21%, 17% and 9% for neat PES to 56.3%, 41.6% and 30.1% for PES/ (CHI-ALG)_3.5 membrane and 99.2%, 92.1% and 78.1% for PES/ (CHI-ALG)_3.5/ Fe⁰@WO₃ membrane, respectively.

A Hydrothermal Synthesis of Fe3O4@C Hybrid Nanoparticle and Magnetic Adsorptive Performance to Remove Heavy Metal Ions in Aqueous Solution

Advanced core-shelled material with a high specific area has been considered as an effective material to remove heavy metal from aqueous solutions. A core-shelled Fe3O4@C hybrid nanoparticle aggregates with environmental-friendly channel in the study. Moreover, the higher exposure of adsorption sites can be achieved for the special configuration that higher Brunauer-Emmet-Teller (BET) surface area reaches up to 238.18 m2 g-1. Thus, a more efficiently heavy metal ion removal is obtained, Pb (II), Cd (II), Cu (II), and Cr (VI) up to 100, 99.2, 96.6, and 94.8%, respectively. In addition, the products are easy to be separated from the aqueous solutions after adsorption, due to the relative large submicrometer size and the enhanced external magnetic fields introduced by the iron-based cores. We provide an ideal mode to remove heavy metal ions using core-shelled Fe3O4@C under the water treatment condition. A new approach is clarified that core-shell nano/micro-functional materials can be synthesized well on large scales which are used in many fields such as environmental remediation, catalyst, and energy.

Carbon nanosphere–iron oxide nanocomposites as high-capacity adsorbents for arsenic removal

Carbon nanosphere–iron oxide nanocomposite adsorbents have been designed to remove arsenic at high capacity.

Enhanced photo-Fenton-like process over Z-scheme CoFe2O4/g-C3N4 Heterostructures under natural indoor light

Low-cost catalysts with high activity and stability toward producing strongly oxidative species are extremely desirable, but their development still remains a big challenge. Here, we report a novel strategy for the synthesis of a magnetic CoFe₂O₄/C₃N₄ hybrid via a simple self-assembly method. The CoFe₂O₄/C₃N₄ was utilized as a photo-Fenton-like catalyst for degradation of organic dyes in the presence of H₂O₂ under natural indoor light irradiation, a green and energy-saving approach for environmental cleaning. It was found the CoFe₂O₄/C₃N₄ hybrid with a CoFe₂O₄: g-C₃N₄ mass ratio of 2:1 can completely degrade Rhodamine B nearly 100 % within 210 min under room-light irradiation. The effects of the amount of H₂O₂ (0.01-0.5 M), initial dye concentration (5-20 mg/L), solution pH (3.08-10.09), fulvic acid concentration (5-50 mg/L), different dyes and catalyst stability on the organic dye degradation were investigated. The introduction of CoFe₂O₄ on g-C₃N₄ produced an enhanced separation efficiency of photogenerated electron - hole pairs by a Z-scheme mechanism between the interfaces of g-C₃N₄ and CoFe₂O₄, leading to an excellent activity as compared with either g-C₃N₄ or CoFe₂O₄ and their mixture. This study demonstrates an efficient way to construct the low-cost magnetic CoFe₂O₄/C₃N₄ heterojunction as a typical Z-scheme system in environmental remediation.

Flexible Electrospun Carbon Nanofiber/Tin(IV) Sulfide Core/Sheath Membranes for Photocatalytically Treating Chromium(VI)-Containing Wastewater

We report an efficient method for fabricating flexible membranes of electrospun carbon nanofiber/tin(IV) sulfide (CNF@SnS₂) core/sheath fibers. CNF@SnS₂ is a new photocatalytic material that can be used to treat wastewater containing high concentrations of hexavalent chromium (Cr(VI)). The hierarchical CNF@SnS₂ core/sheath membranes have a three-dimensional macroporous architecture. This provides continuous channels for the rapid diffusion of photoelectrons generated by SnS₂ nanoparticles under visible light irradiation. The visible light (λ > 400 nm) driven photocatalytic properties of CNF@SnS₂ are evaluated by the reduction of water-soluble Cr(VI). CNF@SnS₂ exhibits high visible light-driven photocatalytic activity because of its low band gap of 2.34 eV. Moreover, CNF@SnS₂ exhibits good photocatalytic stability and excellent cycling stability. Under visible light irradiation, the optimized CNF@SnS₂ membranes exhibit a high rate of degradation of 250 mg/L of aqueous Cr(VI) and can completely degrade the Cr(VI) within 90 min.

Carbothermal synthesis of ordered mesoporous carbon-supported nano zero-valent iron with enhanced stability and activity for hexavalent chromium reduction

Composites of nano zero-valent iron (nZVI) and ordered mesoporous carbon (OMC) are prepared by using simultaneous carbothermal reduction methods. The reactivity and stability of nZVI are expected to be enhanced by embedding it in the ordered pore channels. The structure characteristics of nZVI/OMC and the removal pathway for hexavalent chromium (Cr(VI)) by nZVI/OMC are investigated. Results show that nZVI/OMC with a surface area of 715.16 m(2) g(-1) is obtained at 900 °C. nZVI with particle sizes of 20-30 nm is uniformly embedded in the OMC skeleton. The stability of nZVI is enhanced by surrounding it with a broad carbon layer and a little γ-Fe is derived from the passivation of α-Fe. Detection of ferric state (Fe 2p3/2, around 711.2eV) species confirms that part of the nZVI on the outer surface is inevitably oxidized by O2, even when unused. The removal efficiency of Cr(VI) (50 mg L(-1)) by nZVI/OMC is near 99% within 10 min through reduction (dominant mechanism) and adsorption. nZVI/OMC has the advantage in removal efficiency and reusability in comparison to nZVI/C, OMC and nZVI. This study suggests that nZVI/OMC has the potential for remediation of heavy metal pollution in water.

Metal-organic gel templated synthesis of magnetic porous carbon for highly efficient removal of organic dyes

Magnetic porous carbon composites are promising materials in various applications, such as adsorbents, supercapacitors and catalyst supports, due to their high surface area, thermal and chemical stability, and easy separation. However, despite the increasing number of reports of magnetic porous carbon composites, the preparation of these materials with environmentally friendly procedures still remains a great challenge. Herein, we report a facile method to prepare a magnetic porous carbon composite with high surface area from a Fe-based metal-organic gel (MOG) template, an extended structure of a metal-organic framework (MOF). The obtained magnetic porous carbon composite was applied to remove organic dyes from an aqueous solution by selecting methyl orange (MO) as a model molecule. It exhibits excellent adsorption capacity (182.82 mg g(-1)), fast adsorption kinetics (8.13 × 10(-3) g mg(-1) min(-1)), and a perfect magnetic separation performance for the MO removal. This study demonstrates a new way to achieve clean synthesis of magnetic porous carbon materials, and opens a new door for the application of MOGs in organic dye removal.

Synthesis, physical properties and application of the zero-valent iron/titanium dioxide heterocomposite having high activity for the sustainable photocatalytic removal of hexavalent chromium in water

A magnetic photocatalytic nanocomposite was prepared with enhanced removal capability for Cr(vi) due to synergistic effects.