Nanoscale topography mediates the adhesion of F-actin

Magnetic CuFe2O4 with intrinsic protease-like activity inhibited cancer cell proliferation and migration through mediating intracellular proteins

Protease has been widely used in biological and industrial fields. Developing efficient artificial enzyme mimics remains a major technical challenge due to the high stability of peptide bonds. Nanoenzymes with high stability, high activity and low cost, provided new opportunities to break through natural enzyme inherent limitations. However, compared with many nanomaterials with inherent peroxidase activity, the intrinsic mimic proteases properties of magnetic nanomaterials were seldom explored, let alone the interaction between magnetic nanomaterials and cellular proteins. Herein, we reported for the first time that magnetic CuFe₂O₄ possesses inherent protease activity to hydrolyze bovine serum albumin (BSA) and casein under physiological conditions, and the CuFe₂O₄ is more resistant to high temperature than the natural trypsin. It also exhibited significantly higher catalytic efficiency than other copper nanomaterials and can be recycled for many times. Protease participated in pathophysiological processes and all stages of tumor progression. Interesting, CuFe₂O₄ exhibited anti-proliferative effect on A549, SKOV3, HT-29, BABL-3T3 and HUVEC cells, as well as it was particularly sensitive against SKOV3 cells. CuFe₂O₄ was about 30 times more effective than conventional chemotherapy drugs oxaliplatin and artesunate against SKOV3 cells. In addition, CuFe₂O₄ also mediated the expression of intracellular proteins, such as MMP-2, MMP-9, F-actin, and NF-kB, which may be associated with global protein hydrolysis by CuFe₂O₄, leading to inhibition of cell migration. The merits of the high magnetic properties, good protease-mimic and antitumor activities make CuFe₂O₄ nanoparticles very prospective candidates for many applications such as proteomics and biotechnology.

Selective mediation of ovarian cancer SKOV3 cells death by pristine carbon quantum dots/Cu2O composite through targeting matrix metalloproteinases, angiogenic cytokines and cytoskeleton

It was shown that some nanomaterials may have anticancer properties, but lack of selectivity is one of challenges, let alone selective suppression of cancer growth by regulating the cellular microenvironment. Herein, we demonstrated for the first time that carbon quantum dots/Cu2O composite (CQDs/Cu2O) selectively inhibited ovarian cancer SKOV3 cells by targeting cellular microenvironment, such as matrix metalloproteinases, angiogenic cytokines and cytoskeleton. The result was showed CQDs/Cu2O possessed anticancer properties against SKOV3 cells with IC50 = 0.85 μg mL-1, which was approximately threefold lower than other tested cancer cells and approximately 12-fold lower than normal cells. Compared with popular anticancer drugs, the IC50 of CQDs/Cu2O was approximately 114-fold and 75-fold lower than the IC50 of commercial artesunate (ART) and oxaliplatin (OXA). Furthermore, CQDs/Cu2O possessed the ability to decrease the expression of MMP-2/9 and induced alterations in the cytoskeleton of SKOV3 cells by disruption of F-actin. It also exhibited stronger antiangiogenic effects than commercial antiangiogenic inhibitor (SU5416) through down-regulating the expression of VEGFR2. In addition, CQDs/Cu2O has a vital function on transcriptional regulation of multiple genes in SKOV3 cells, where 495 genes were up-regulated and 756 genes were down-regulated. It is worth noting that CQDs/Cu2O also regulated angiogenesis-related genes in SKOV3 cells, such as Maspin and TSP1 gene, to suppress angiogenesis. Therefore, CQDs/Cu2O selectively mediated of ovarian cancer SKOV3 cells death mainly through decreasing the expression of MMP-2, MMP-9, F-actin, and VEGFR2, meanwhile CQDs/Cu2O caused apoptosis of SKOV3 via S phase cell cycle arrest. These findings reveal a new application for the use of CQDs/Cu2O composite as potential therapeutic interventions in ovarian cancer SKOV3 cells.

Pristine Cu-MOF Induces Mitotic Catastrophe and Alterations of Gene Expression and Cytoskeleton in Ovarian Cancer Cells

Metals-organic frameworks (MOFs) have been widely explored in biomedicine, mostly in drug delivery, biosensing, and bioimaging due to their large surface area, tunable porosity, readily chemical functionalization, and good biocompatibility. However, the underlining cellular mechanisms controlling the process for MOF cytotoxicity remains almost completely unknown. Here, we demonstrate that pristine Cu-MOF without any loaded drug selectively inhibited ovarian cancer mainly through promoting tubulin polymerization and destroying the cell actin cytoskeleton (F-actin) to trigger the mitotic catastrophe, accompanying by conventional programmed cell death. To our knowledge, this is the first report claiming that mitotic catastrophe may be an explaining mechanism of MOF cytotoxicity. Cu-MOF with an intrinsic protease-like activity also hydrolyzed cellular cytoskeleton proteins (F-actin). The RNA sequencing data indicated the differential expressional mRNA of cell proliferation and actin cytoskeleton (ACTA2, ACTN3, FSCN2, and SCIN) and mitotic spindles (PLK1 and TPX2) related genes. We found that Cu-MOF as a promising candidate in the disruption of cellular cytoskeleton and the change of the gene expression could be actin altering and antimitotic agents against cancer cells, allowing for fundamental biological and biophysical studies of MOFs.

Super Stable Fluorescein Isothiocyanate Isomer I Monolayer for Total Internal Reflection Fluorescence Microscopy

Total internal reflection fluorescence microscopy (TIRFM) is an important method in surface science and for the analysis of surface-bound macromolecules. Here, we developed and explored the use of a novel fluorescein isothiocyanate isomer I (FITC)-adsorbed monolayer for alignment and validation of TIRFM measurements and configurations. Aqueous solutions of FITC exist as several different protolytic forms (dianionic, anionic, neutral, and cationic) with each form having different emission characteristics. However, the emission behavior of FITC adsorbed on hydrophilic, hydrophobic, and unmodified glass surfaces at different pH was unknown. TIRFM imaging and spectroscopy were used to study FITC and FITC-labeled bovine serum albumin (BSA-FITC) monolayers generated on three different glass surfaces. Monolayer emission intensity, spectra, and the photobleaching profiles were all dependent on pH and the surface properties of the glass. Very strangely, however, at pH 5.0 on hydrophobic surfaces, the FITC monolayers produced were both bright and apparently unbleachable over ∼20 min of imaging (60 s total exposure). During monolayer formation at pH 5.0, we saw clear evidence for concentration-based quenching, indicating high surface coverage. When the monolayer had been rinsed with buffer to remove unbound FITC, we observed an increase in emission intensity during illumination indicative of some form of photoactivated species being present. Eventually, the fluorescence emission stabilized and remained constant for extended periods of time with no evidence of photobleaching. We hypothesize that during the adsorption process (a hydrophobic-hydrophobic interaction) there was conversion to the fluorescent quinoid form of FITC. In contrast, at pH 7.4 and 9.6 on hydrophobic surfaces, FITC monolayers had well-defined, fast photobleaching kinetics (decay to ∼50% intensity in 5-10 s). The equivalent BSA-FITC monolayers were slightly brighter, with similar photobleaching kinetics. While the precise mechanism for this unusual behavior is still unknown, all these low-cost monolayers were easily prepared, were reproducible, and can serve as convenient test samples for TIRFM alignment, calibration, and validation prior to undertaking measurements with more sensitive biogenic or biological specimens.

Hierarchical nanoparticle topography in amphiphilic copolymer films controlled by thermodynamics and dynamics

This study systematically investigates how polymer composition changes nanoparticle (NP) grafting and diffusion in solvated random copolymer thin films. By thermal annealing from 135 to 200 °C, thin films with a range of hydrophobicity are generated by varying acrylic acid content from 2% (SAA2) to 29% (SAA29). Poly(styrene-random-tert butyl acrylate) films, 100 nm thick, that are partially converted to poly(styrene-random-acrylic acid), SAA, reversibly swell in ethanol solutions containing amine-functionalized SiO2 nanoparticles with a diameter of 45 nm. The thermodynamics and kinetics of NP grafting are directly controlled by the AA content in the SAA films. At low AA content, namely SAA4, NP attachment saturates at a monolayer, consistent with a low solubility of NPs in SAA4 due to a weakly negative χ parameter. When the AA content exceeds 4%, NPs sink into the film to form multilayers. These films exhibit hierarchical surface roughness with a RMS roughness greater than the NP size. Using a quartz crystal microbalance, NP incorporation in the film is found to saturate after a mass equivalence of about 3 close-packed layers of NPs have been incorporated within the SAA. The kinetics of NP grafting is observed to scale with AA content. The surface roughness is greatest at intermediate times (5-20 min) for SAA13 films, which also exhibit superhydrophobic wetting. Because clustering and aggregation of the NPs within SAA29 films reduce film transparency, SAA13 films provide both maximum hydrophobicity and transparency. The method in this study is widely applicable because it can be applied to many substrate types, can cover large areas, and retains the amine functionality of the particles which allows for subsequent chemical modification.

Nanoscaled surface patterns influence adhesion and growth of human dermal fibroblasts

In general, there is a need for passivation of nanopatterned biomaterial surfaces if cells are intended to interact only with a feature of interest. For this reason self-assembled monolayers (SAM), varying in chain length, are used; they are highly effective in preventing protein adsorption or cell adhesion. In addition, a simple and cost-effective technique to design nanopatterns of various sizes and distances, the so-called nanosphere lithography (NSL), is discussed, which allows the control of cell adhesion and growth depending on the feature dimensions. Combining both techniques results in highly selective nanostructured surfaces, showing that single proteins selectively adsorb on activated nanopatterns. Additionally, adhesion and growth of normal human dermal fibroblasts (NHDF) is strongly affected by the nanostructure dimensions, and it is proven that fibronectin (FN) matrix formation of these cells is influenced, too. Moreover, the FN fibrils are linked to the hexagonally close-packed nanopatterns. As a result, the system presented here can be applied in tissue engineering and implant design due to the fact that the nanopattern dimensions give rise to further modifications and allow the introduction of chemical heterogeneity to guide stem cell differentiation in the future.

Microscopy basics and the study of actin-actin-binding protein interactions

Actin is a multifunctional eukaryotic protein with a globular monomer form that polymerizes into a thin, linear microfilament in cells. Through interactions with various actin-binding proteins (ABPs), actin plays an active role in many cellular processes, such as cell motility and structure. Microscopy techniques are powerful tools for determining the role and mechanism of actin-ABP interactions in these processes. In this article, we describe the basic concepts of fluorescent speckle microscopy, total internal reflection fluorescence microscopy, atomic force microscopy, and cryoelectron microscopy and review recent studies that utilize these techniques to visualize the binding of actin with ABPs.