Surface charge dependent nanoparticle disruption and deposition of lipid bilayer assemblies

Antibacterial Nanomaterials: Mechanisms, Impacts on Antimicrobial Resistance and Design Principles

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.

Localized Delivery of Bioactives using Structured Liposomal Gels

Liposomes have gained a lot of interest for drug delivery applications, and some of these preparations have been commercialized. These are formulated with biocompatible components and can be used for delivering a wide range of payloads differing in aqueous solubility and molecular weight. Liposome-based delivery approaches are limited mainly by two factors: (a) poor dispersion stability, and (b) pre-mature leakage of payloads. In this review, we have discussed the stabilization of liposomal vesicles by their entrapment in hydrogels. Studies reveal that such hydrogels can maintain the structural integrity of liposomes. Release of liposomes from the hydrogel network can be modulated through careful screening of matrix former and degree of its cross-linking. Accordingly, we have reviewed the approaches of stabilizing liposomal vesicles through entrapment in hydrogels. Application of liposome-embedded hydrogels has been reviewed in context of localized drug delivery. Our discussion is focussed on the delivery of bioactives to the skin. Such an approach appears alluring from the standpoint of minimizing the undesirable distribution of payload(s) the systemic circulation and off-target sites.

Photocatalytic nanoparticles - From membrane interactions to antimicrobial and antiviral effects

As a result of increasing resistance among pathogens against antibiotics and anti-viral therapeutics, nanomaterials are attracting current interest as antimicrobial agents. Such materials offer triggered functionalities to combat challenging infections, based on either direct membrane action, effects of released ions, thermal shock induced by either light or magnetic fields, or oxidative photocatalysis. In the present overview, we focus on photocatalytic antimicrobial effects, in which light exposure triggers generation of reactive oxygen species. These, in turn, cause oxidative damage to key components in bacteria and viruses, including lipid membranes, lipopolysaccharides, proteins, and DNA/RNA. While an increasing body of studies demonstrate that potent antimicrobial effects can be achieved by photocatalytic nanomaterials, understanding of the mechanistic foundation underlying such effects is still in its infancy. Addressing this, we here provide an overview of the current understanding of the interaction of photocatalytic nanomaterials with pathogen membranes and membrane components, and how this translates into antibacterial and antiviral effects.

All Hydroxyl-Thiol-Protected Gold Nanoclusters with Near-Neutral Surface Charge

Hydrophilic gold nanoclusters (Au NCs) whose physical and chemical properties are not susceptible to large changes in pH are greatly desired for diverse applications. Here, we design Au NCs protected by a hydroxyl-thiol ligand (e.g., 1-thioglycerol (TG)) with a molecular formula of Au₃₄(TG)₂₂ as a proof-of-concept for a Au NC model with near-neutral surface charge. Unlike hydrophilic thiols with charged functional groups (e.g., carboxylate-thiol) that are usually used for hydrophilic Au NCs, this type of Au NCs is protected by hydroxyl-thiols, which are less susceptible to the prevailing pH conditions as the hydroxyl group is less acidic than water. More interestingly, the resulting Au NCs also possess pH-independent fluorescence intensity, making them suitable for applications under strong acidic conditions, which are currently not available in the reported hydrophilic Au NCs.

Development and immunobiological evaluation of nanoparticles containing an immunodominant epitope of herpes simplex virus

Herpes simplex virus (HSV) 1 and 2 are viruses that infect individuals worldwide and for which there is no cure or vaccine available. The protective response against herpes is mostly mediated by CD8 T lymphocytes that respond to the immunodominant SSIEFARL epitope. However, there are some obstacles concerning the use of free SSIEFARL for vaccine or immunotherapy. The aim of this study was to evaluate the feasibility of nanoencapsulation of SSIEFARL and its immunostimulatory properties. Nano/SSIEFARL was produced by interfacial polymerization in methylmetacrylate, and the physico-chemical properties, morphology and immunobiological parameters were evaluated. To evaluate the ex vivo capacity of Nano/SSIEFARL, we used splenocytes from HSV-1-infected mice to enhance the frequency of SSIEFARL-specific CD8 T lymphocytes. The results indicate that Nano/SSIEFARL has a spherical shape, an average diameter of 352 ± 22 nm, the PDI was 0.361 ± 0.009 and is negatively charged (-26.30 ± 35). The stability at 4°C was 28 days. Also, Nano/SSIEFARL is not toxic for cells at low concentrations in vitro and it is taken up by JAWS II dendritic cells. No histopathological changes were observed in kidneys, liver and lymph nodes of animals treated with Nano/SSIEFARL. Nan/SSIEFARL increased the production of IL-1β, TNF-α and IL-12 by the dendritic cells. Finally, Nano/SSIEFARL expanded the frequency of SSIEFARL-specific CD8+T lymphocytes at the same rate as free SSIEFARL. In conclusion all data together indicate that SSIEFARL is suitable for nanoencapsulation, and the system produced presents some immunoadjuvant properties that can be used to improve the immune response against herpes.

Interaction of graphene oxide with artificial cell membranes: Role of anionic phospholipid and cholesterol in nanoparticle attachment and membrane disruption

A mechanistic understanding of the interaction of graphene oxide (GO) with cell membranes is critical for predicting the biological effects of GO following accidental exposure and biomedical applications. We herein used a quartz crystal microbalance with dissipation monitoring (QCM-D) to probe the interaction of GO with model cell membranes modified with anionic lipids or cholesterol under biologically relevant conditions. The attachment efficiency of GO on supported lipid bilayers (SLBs) decreased with increasing anionic lipid content and was unchanged with varying cholesterol content. In addition, the incorporation of anionic lipids to the SLBs rendered the attachment of GO partially reversible upon a decrease in solution ionic strength. These results demonstrate the critical role of lipid bilayer surface charge in controlling GO attachment and release. We also employed the fluorescent dye leakage technique to quantify the role of anionic lipids and cholesterol in vesicle disruption caused by GO. Notably, we observed a linear correlation between the amount of dye leakage from the vesicles and the attachment efficiencies of GO on the SLBs, confirming that membrane disruption is preceded by GO attachment. This study highlights the non-negligible role of lipid bilayer composition in controlling the physicochemical interactions between cell membranes and GO.

Defects and defect engineering in Soft Matter

Soft matter covers a wide range of materials based on linear or branched polymers, gels and rubbers, amphiphilic (macro)molecules, colloids, and self-assembled structures. These materials have applications in various industries, all highly important for our daily life, and they control all biological functions; therefore, controlling and tailoring their properties is crucial. One way to approach this target is defect engineering, which aims to control defects in the material's structure, and/or to purposely add defects into it to trigger specific functions. While this approach has been a striking success story in crystalline inorganic hard matter, both for mechanical and electronic properties, and has also been applied to organic hard materials, defect engineering is rarely used in soft matter design. In this review, we present a survey on investigations on defects and/or defect engineering in nine classes of soft matter composed of liquid crystals, colloids, linear polymers with moderate degree of branching, hyperbranched polymers and dendrimers, conjugated polymers, polymeric networks, self-assembled amphiphiles and proteins, block copolymers and supramolecular polymers. This overview proposes a promising role of this approach for tuning the properties of soft matter.

Property-Activity Relationship of Black Phosphorus at the Nano-Bio Interface: From Molecules to Organisms

As a novel member of the two-dimensional nanomaterial family, mono- or few-layer black phosphorus (BP) with direct bandgap and high charge carrier mobility is promising in many applications such as microelectronic devices, photoelectronic devices, energy technologies, and catalysis agents. Due to its benign elemental composition (phosphorus), large surface area, electronic/photonic performances, and chemical/biological activities, BP has also demonstrated a great potential in biomedical applications including biosensing, photothermal/photodynamic therapies, controlled drug releases, and antibacterial uses. The nature of the BP-bio interface is comprised of dynamic contacts between nanomaterials (NMs) and biological systems, where BP and the biological system interact. The physicochemical interactions at the nano-bio interface play a critical role in the biological effects of NMs. In this review, we discuss the interface in the context of BP as a nanomaterial and its unique physicochemical properties that may affect its biological effects. Herein, we comprehensively reviewed the recent studies on the interactions between BP and biomolecules, cells, and animals and summarized various cellular responses, inflammatory/immunological effects, as well as other biological outcomes of BP depending on its own physical properties, exposure routes, and biodistribution. In addition, we also discussed the environmental behaviors and potential risks on environmental organisms of BP. Based on accumulating knowledge on the BP-bio interfaces, this review also summarizes various safer-by-design strategies to change the physicochemical properties including chemical stability and nano-bio interactions, which are critical in tuning the biological behaviors of BP. The better understanding of the biological activity of BP at BP-bio interfaces and corresponding methods to overcome the challenges would promote its future exploration in terms of bringing this new nanomaterial to practical applications.

"Ghost" Silica Nanoparticles of "Host"-Inherited Antibacterial Action

We fabricated surface-rough mesoporous silica nanoparticles ("ghost" SiO₂NPs) by using composite mesoporous copper oxide nanoparticles ("host" CuONPs) as templates, which allowed us to mimic their surface morphology. The "host" CuONPs used here as templates, however, had a very high antibacterial effect, with or without functionalization. To evaluate the surface roughness effect on the "ghost" SiO₂NPs antibacterial action, we functionalized them with (3-glycidyloxypropyl)trimethoxysilane (GLYMO) to permit additional covalent coupling of 4-hydroxyphenylboronic acid (4-HPBA). The diol groups on the bacterial membrane can form reversible covalent bonds with boronic acid (BA) groups on the "ghost" SiO₂NPs surface and bind to the bacteria, resulting in a very strong amplification of their antibacterial activity, which does not depend on electrostatic adhesion. The BA-functionalized "ghost" SiO₂NPs showed a very significant antibacterial effect as compared to smooth SiO₂NPs of the same surface coating and particle size. We attribute this to the "ghost" SiO₂NPs mesoporous surface morphology, which mimics to a certain extent those of the original mesoporous CuONPs used as templates for their preparation. We envisage that the "ghost" SiO₂NPs effectively acquire some of the antibacterial properties from the "host" CuONPs, with the same functionality, despite being completely free of copper. The antibacterial effect of the functionalized "ghost" SiO₂NPs/GLYMO/4-HPBA on Rhodococcus rhodochrous (R. rhodochrous) and Escherichia coli (E. coli) is much higher than that of the nonfunctionalized "ghost" SiO₂NPs or the "ghost" SiO₂NPs/GLYMO. The results indicate that the combination of rough surface morphology and strong adhesion of the particle surface to the bacteria can make even benign material such as silica act as a strong antimicrobial agent. Additionally, our BA-functionalized nanoparticles ("ghost" SiO₂NPs/GLYMO/4-HPBA) showed no detectable cytotoxic impact against human keratinocytes at particle concentrations, which are effective against bacteria.

Lipid bilayer disruption induced by amphiphilic Janus nanoparticles: the non-monotonic effect of charged lipids

In this study, we report the complex effects of charged lipids on the interaction between amphiphilic Janus nanoparticles and lipid bilayers. Janus nanoparticles are cationic on one hemisphere and hydrophobic on the other. We show that the nanoparticles, beyond threshold concentrations, induce holes in both cationic and anionic lipid bilayers mainly driven by hydrophobic interactions. However, the formation of these defects is non-monotonically dependent on ionic lipid composition. The electrostatic attraction between the particles and anionic lipid bilayers enhances particle adsorption and lowers the particle concentration threshold for defect initiation, but leads to more localized membrane disruption. Electrostatic repulsion leads to reduced particle adsorption on cationic bilayers and extensive defect formation that peaks at intermediate contents of cationic lipids. This study elucidates the significant role lipid composition plays in influencing how amphiphilic Janus nanoparticles interact with and perturb lipid membranes.

Designing of membrane-active nano-antimicrobials based on cationic copolymer functionalized nanodiamond: Influence of hydrophilic segment on antimicrobial activity and selectivity

Designing cationic nano-antimicrobial is a promising solution for combating drug resistant microbes. In this work, hydrophilic cationic copolymer was applied for the surface functionalization of nanodiamonds (NDs) aiming at developing a highly membrane-active nano-antibacterial agent with satisfactory selectivity. As a result, after functionalization, the increased repulsive forces within NDs and interaction with solvent molecular network made the heavily aggregated pristine NDs break down into tiny nanoparticles with particle size ranging from 10 to 100 nm. The improved hydrophilicity and enlarged surface area endowed QND-H₅ and QND-H₁₀ a powerful bactericidal capability toward both of Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). In the further bactericidal assessment, it was also demonstrated that the formation of hydrogen bonding between the 2-hydroxyethyl methacrylate (HEMA) side chains and lipid head groups of bacterial membrane also contributed to the enhanced bactericidal ability. Field emission scanning electron microscopy analysis confirmed that as-prepared nano-hybrid acted bactericidal ability via physical nature of outer membrane and cytoplasmic membrane-separating destruction mechanism toward E. coli, which may derive from the hydrogen bonding ability, making them more effective toward bacterial. More importantly, it was found that with just 10% of HEMA, QND-H₁₀ displayed good selectivity toward bacteria over mammalian cells as shown by the high HC₅₀ values with relatively low MIC values, suggesting the great potential application in medical fields. These results indicate that hydrogen bonding is an important element to achieve the desired high antibacterial activity and selectivity, particularly when cationic nano-antibacterial agents are required for medical application.

Probing Interactions between AuNPs/AgNPs and Giant Unilamellar Vesicles (GUVs) Using Hyperspectral Dark-field Microscopy

Noble metallic nanoparticles (NPs) such as gold and silver nanoparticles (AuNPs and AgNPs) have been shown to exhibit anti-tumor effect in anti-angiogenesis, photothermal and radio therapeutics. On the other hand, cell membranes are critical locales for specific targeting of cancerous cells. Therefore, NP-membrane interactions need be studied at molecular level to help better understand the underlying physicochemical mechanisms for future applications in cancer nanotechnology. Herein, we report our study on the interactions between citrate stabilized colloidal AuNPs/AgNPs (10 nm in size) and giant unilamellar vesicles (GUVs) using hyperspectral dark-field microscopy. GUVs are large model vesicle systems well established for the study of membrane dynamics. GUVs used in this study were prepared with dimyristoyl phosphatidylcholine (DMPC) and doped with cholesterol at various molar concentrations. Both imaging and spectral results support that AuNPs and AgNPs interact very differently with GUVs, i.e., AuNPs tend to integrate in between the lipid bilayer and form a uniform golden-brown crust on vesicles, whereas AgNPs are bejeweled on the vesicle surface as isolated particles or clusters with much varied configurations. The more disruptive capability of AuNPs is hypothesized to be responsible for the formation of golden brown crusts in AuNP-GUV interaction. GUVs of 20 mol% CHOL:DMPC were found to be a most economical concentration for GUVs to achieve the best integrity and the least permeability, consistent with the finding from other phase studies of lipid mixture that the liquid-ordered domains have the largest area fraction of the entire membrane at around 20 mol% of cholesterol.

Membrane interactions and antimicrobial effects of inorganic nanoparticles

Interactions between nanoparticles and biological membranes are attracting increasing attention in current nanomedicine, and play a key role both for nanotoxicology and for utilizing nanomaterials in diagnostics, drug delivery, functional biomaterials, as well as combinations of these, e.g., in theranostics. In addition, there is considerable current interest in the use of nanomaterials as antimicrobial agents, motivated by increasing resistance development against conventional antibiotics. Here, various nanomaterials offer opportunities for triggered functionalites to combat challenging infections. Although the performance in these diverse applications is governed by a complex interplay between the nanomaterial, the properties of included drugs (if any), and the biological system, nanoparticle-membrane interactions constitute a key initial step and play a key role for the subsequent biological response. In the present overview, the current understanding of inorganic nanomaterials as antimicrobial agents is outlined, with special focus on the interplay between antimicrobial effects and membrane interactions, and how membrane interactions and antimicrobial effects of such materials depend on nanoparticle properties, membrane composition, and external (e.g., light and magnetic) fields.

Probing the threshold of membrane damage and cytotoxicity effects induced by silica nanoparticles in Escherichia coli bacteria

The engineering of nanomaterials, because of their specific properties, is increasingly being developed for commercial purposes over the past decades, to enhance diagnosis, cosmetics properties as well as sensing efficiency. However, the understanding of their fate and thus their interactions at the cellular level with bio-organisms remains elusive. Here, we investigate the size- and charge-dependence of the damages induced by silica nanoparticles (SiO₂-NPs) on Gram-negative Escherichia coli bacteria. We show and quantify the existence of a NPs size threshold discriminating toxic and inert SiO₂-NPs with a critical particle diameter (Φ_c) in the range 50nm-80nm. This particular threshold is identified at both the micrometer scale via viability tests through Colony Forming Units (CFU) counting, and the nanometer scale via atomic force microscopy (AFM). At this nanometer scale, AFM emphasizes the interaction between the cell membrane and SiO₂-NPs from both topographic and mechanical points of view. For SiO₂-NPs with Φ>Φ_c no change in E. coli morphology nor its outer membrane (OM) organization is observed unless the NPs are positively charged in which case reorganization and disruption of the OM are detected. Conversely, when Φ<Φ_c, E. coli exhibit unusual spherical shapes, partial collapse, even lysis, and OM reorganization.

Probing the Interaction of Dielectric Nanoparticles with Supported Lipid Membrane Coatings on Nanoplasmonic Arrays

The integration of supported lipid membranes with surface-based nanoplasmonic arrays provides a powerful sensing approach to investigate biointerfacial phenomena at membrane interfaces. While a growing number of lipid vesicles, protein, and nucleic acid systems have been explored with nanoplasmonic sensors, there has been only very limited investigation of the interactions between solution-phase nanomaterials and supported lipid membranes. Herein, we established a surface-based localized surface plasmon resonance (LSPR) sensing platform for probing the interaction of dielectric nanoparticles with supported lipid bilayer (SLB)-coated, plasmonic nanodisk arrays. A key emphasis was placed on controlling membrane functionality by tuning the membrane surface charge vis-à-vis lipid composition. The optical sensing properties of the bare and SLB-coated sensor surfaces were quantitatively compared, and provided an experimental approach to evaluate nanoparticle-membrane interactions across different SLB platforms. While the interaction of negatively-charged silica nanoparticles (SiNPs) with a zwitterionic SLB resulted in monotonic adsorption, a stronger interaction with a positively-charged SLB resulted in adsorption and lipid transfer from the SLB to the SiNP surface, in turn influencing the LSPR measurement responses based on the changing spatial proximity of transferred lipids relative to the sensor surface. Precoating SiNPs with bovine serum albumin (BSA) suppressed lipid transfer, resulting in monotonic adsorption onto both zwitterionic and positively-charged SLBs. Collectively, our findings contribute a quantitative understanding of how supported lipid membrane coatings influence the sensing performance of nanoplasmonic arrays, and demonstrate how the high surface sensitivity of nanoplasmonic sensors is well-suited for detecting the complex interactions between nanoparticles and lipid membranes.

Effects of charge and surface defects of multi-walled carbon nanotubes on the disruption of model cell membranes

The direct contact between multi-walled carbon nanotubes (MWCNTs) and cell membranes causes membrane disruption, potentially leading to cytotoxicity. However, the role of electrostatic forces and MWCNT properties is still open to debate. In this study, the influences of charge and MWCNT surface defects on membrane disruption were investigated by microscopy and a quartz crystal microbalance with dissipation monitoring (QCM-D). Positively/negatively charged giant unilamellar vesicles (GUVs) and supported lipid bilayers (SLBs) were made as model cell membranes. Negatively charged MWCNTs disrupted the GUVs containing positively charged lipids, which confirmed the electrostatically mediated interaction. However, the mass loss was detected from the negatively charged SLBs after MWCNT exposure, which suggests the extraction of phospholipids. The defect degree of MWCNTs correlated with their adhesion amount on the membranes. Both the oxygenated functional groups and unoxidized dangling carbon bonds were active sites for MWCNT-membrane interactions. The MWCNTs were observed to be engulfed inside the GUVs. The results clearly demonstrate that phospholipid extraction by MWCNTs could occur in electrostatically repulsive conditions, and MWCNT defects were active binding sites whether or not they were oxygenated. Our findings should be helpful in the design and safe applications of carbon nanomaterials.

Interaction of polymer-coated silicon nanocrystals with lipid bilayers and surfactant interfaces

We use photoluminescence (PL) microscopy to measure the interaction between polyethylene-glycol-coated (PEGylated) silicon nanocrystals (SiNCs) and two model surfaces: lipid bilayers and surfactant interfaces. By characterizing the photostability, transport, and size-dependent emission of the PEGylated nanocrystal clusters, we demonstrate the retention of red PL suitable for detection and tracking with minimal blueshift after a year in an aqueous environment. The predominant interaction measured for both interfaces is short-range repulsion, consistent with the ideal behavior anticipated for PEGylated phospholipid coatings. However, we also observe unanticipated attractive behavior in a small number of scenarios for both interfaces. We attribute this anomaly to defective PEG coverage on a subset of the clusters, suggesting a possible strategy for enhancing cellular uptake by controlling the homogeneity of the PEG corona. In both scenarios, the shape of the apparent potential is modeled through the free or bound diffusion of the clusters near the confining interface.

QCM-D study of nanoparticle interactions

Quartz crystal microbalance with dissipation monitoring (QCM-D) has been proven to be a powerful research tool to investigate in situ interactions between nanoparticles and different functionalized surfaces in liquids. QCM-D can also be used to quantitatively determine adsorption kinetics of polymers, DNA and proteins from solutions on various substrate surfaces while providing insights into conformations of adsorbed molecules. This review aims to provide a comprehensive overview on various important applications of QCM-D, focusing on deposition of nanoparticles and attachment-detachment of nanoparticles on model membranes in complex fluid systems. We will first describe the working principle of QCM-D and DLVO theory pertinent to understanding nanoparticle deposition phenomena. The interactions between different nanoparticles and functionalized surfaces for different application areas are then critically reviewed. Finally, the potential applications of QCM-D in other important fields are proposed and knowledge gaps are identified.

Toward More Free-Floating Model Cell Membranes: Method Development and Application to Their Interaction with Nanoparticles

Identifying the mechanisms of nanoparticle (NP) interactions with cell membranes is key to understanding potential NP cytotoxicity and applications as nanocarriers for targeted drug delivery. To elucidate these mechanisms of interaction, supported phospholipid bilayers (SPBs) are commonly used as models of cell membranes. However, SPBs are soft thin films, and, as such, their properties can be significantly affected by the underlying substrate. Free-floating cell membranes would be best modeled by weakly adhered SPBs; thus, we propose a method for tailoring the interfacial interaction of an electrically charged SPB-substrate system based on modulations in the solution chemistry. Using the dissipation signal of the quartz crystal microbalance with dissipation monitoring (QCM-D), we show that the method can be used to tailor SPB-substrate interactions without the loss of its structural integrity. To demonstrate the application of the method, SPBs are exposed to cationic and anionic polystyrene latex NPs. These studies reveal that the bilayer response to the modulations in the interfacial interaction with its underlying substrate can be used as a sensitive tool to probe the integrity of SPBs upon exposure to NPs. As expected, anionic NPs tend to impart no significant damage to the anionic bilayers, whereas cationic NPs can be detrimental to bilayer integrity. This is the first report of a QCM-D based method to probe bilayer integrity following exposure to NPs. Importantly, the degree of SPB interaction with its underlying substrate is shown to be a critical factor in the kinetics of bilayer disruption by cationic NPs, whereby weakly adhered bilayers are prone to significantly faster breakup. Since free-floating cell membranes are better represented by a weakly adhered SPB, the results of this work critically influence paradigms in experimental studies involving SPBs as models for cell membranes.

Recent developments in methodology employed to study the interactions between nanomaterials and model lipid membranes

With the boom of nanotechnology, nanomaterials (NMs) have been widely utilized in diverse applications, especially in biological and biomedical fields. Understanding how NMs interact with biomolecules, including proteins, DNA, and lipids, is of great importance for revealing the limitations posed and opportunities offered. Model lipid membrane, as a simplified cell membrane model, has been widely used to study the nanomaterial-lipid membrane interactions. In this article, current and emerging techniques, both experimental and theoretical, to investigate the interactions between NMs and model lipid membrane are summarized with each tool's capacities and limitations, along with future directions and challenges in this exciting area. This critical information will provide methodological guidance for researchers in this field.

Nanoparticle-lipid bilayer interactions studied with lipid bilayer arrays

The widespread environmental presence and commercial use of nanoparticles have raised significant health concerns as a result of many in vitro and in vivo assays indicating toxicity of a wide range of nanoparticle species. Many of these assays have identified the ability of nanoparticles to damage cell membranes. These interactions can be studied in detail using artificial lipid bilayers, which can provide insight into the nature of the particle-membrane interaction through variation of membrane and solution properties not possible with cell-based assays. However, the scope of these studies can be limited because of the low throughput characteristic of lipid bilayer platforms. We have recently described an easy to use, parallel lipid bilayer platform which we have used to electrically investigate the activity of 60 nm diameter amine and carboxyl modified polystyrene nanoparticles (NH2-NP and COOH-NP) with over 1000 lipid bilayers while varying lipid composition, bilayer charge, ionic strength, pH, voltage, serum, particle concentration, and particle charge. Our results confirm recent studies finding activity of NH2-NP but not COOH-NP. Detailed analysis shows that NH2-NP formed pores 0.3-2.3 nm in radius, dependent on bilayer and solution composition. These interactions appear to be electrostatic, as they are regulated by NH2-NP surface charge, solution ionic strength, and bilayer charge. The ability to rapidly measure a large number of nanoparticle and membrane parameters indicates strong potential of this bilayer array platform for additional nanoparticle bilayer studies.

Advances in studies of nanoparticle–biomembrane interactions

Nanoparticles (NPs) are widely applied in nanomedicine and diagnostics based on the interactions between NPs and the basic barrier (biomembrane). Understanding the underlying mechanism of these interactions is important for enhancing their beneficial effects and avoiding potential nanotoxicity. Experimental, mathematical and numerical modeling techniques are involved in this field. This article reviews the state-of-the-art techniques in studies of NP–biomembrane interactions with a focus on each technology's advantages and disadvantages. The aim is to better understand the mechanism of NP–biomembrane interactions and provide significant guidance for various fields, such as nanomedicine and diagnosis.

Interplay of electrostatics and lipid packing determines the binding of charged polymer coated nanoparticles to model membranes

Cationic nanoparticles show larger penetration within well-packed zwitterionic lipid bilayer.

Lipopolysaccharide-induced dynamic lipid membrane reorganization: tubules, perforations, and stacks

Lipopolysaccharide (LPS) is a unique lipoglycan, with two major physiological roles: 1), as a major structural component of the outer membrane of Gram-negative bacteria and 2), as a highly potent mammalian toxin when released from cells into solution (endotoxin). LPS is an amphiphile that spontaneously inserts into the outer leaflet of lipid bilayers to bury its hydrophobic lipidic domain, leaving the hydrophilic polysaccharide chain exposed to the exterior polar solvent. Divalent cations have long been known to neutralize and stabilize LPS in the outer membrane, whereas LPS in the presence of monovalent cations forms highly mobile negatively-charged aggregates. Yet, much of our understanding of LPS and its interactions with the cell membrane does not take into account its amphiphilic biochemistry and charge polarization. Herein, we report fluorescence microscopy and atomic force microscopy analysis of the interaction between LPS and fluid-phase supported lipid bilayer assemblies (sLBAs), as model membranes. Depending on cation availability, LPS induces three remarkably different effects on simple sLBAs. Net-negative LPS-Na(+) leads to the formation of 100-μm-long flexible lipid tubules from surface-associated lipid vesicles and the destabilization of the sLBA resulting in micron-size hole formation. Neutral LPS-Ca(2+) gives rise to 100-μm-wide single- or multilamellar planar sheets of lipid and LPS formed from surface-associated lipid vesicles. Our findings have important implications about the physical interactions between LPS and lipids and demonstrate that sLBAs can be useful platforms to study the interactions of amphiphilic virulence factors with cell membranes. Additionally, our study supports the general phenomenon that lipids with highly charged or bulky headgroups can promote highly curved membrane architectures due to electrostatic and/or steric repulsions.

Nanoparticles meet cell membranes: probing nonspecific interactions using model membranes

Nanotoxicity studies have shown that both carbon-based and inorganic engineered nanoparticles can be toxic to microorganisms. Although the pathways for cytotoxicity are diverse and dependent upon the nature of the engineered nanoparticle and the chemical environment, numerous studies have provided evidence that direct contact between nanoparticles and bacterial cell membranes is necessary for cell inactivation or damage, and may in fact be a primary mechanism for cytotoxicity. The propensities for nanoparticles to attach to and disrupt cell membranes are still not well understood due to the heterogeneous and dynamic nature of biological membranes. Model biological membranes can be employed for systematic investigations of nanoparticle-membrane interactions. In this article, current and emerging experimental approaches to identify the key parameters that control the attachment of ENPs on model membranes and the disruption of membranes by ENPs will be discussed. This critical information will help enable the "safe-by-design" production of engineered nanoparticles that are nontoxic or biocompatible, and also allow for the design of antimicrobial nanoparticles for environmental and biomedical applications.

Negatively charged metal oxide nanoparticles interact with the 20S proteasome and differentially modulate its biologic functional effects

The multicatalytic ubiquitin-proteasome system (UPS) carries out proteolysis in a highly orchestrated way and regulates a large number of cellular processes. Deregulation of the UPS in many disorders has been documented. In some cases, such as carcinogenesis, elevated proteasome activity has been implicated in disease development, while the etiology of other diseases, such as neurodegeneration, includes decreased UPS activity. Therefore, agents that alter proteasome activity could suppress as well as enhance a multitude of diseases. Metal oxide nanoparticles, often developed as diagnostic tools, have not previously been tested as modulators of proteasome activity. Here, several types of metal oxide nanoparticles were found to adsorb to the proteasome and show variable preferential binding for particular proteasome subunits with several peptide binding "hotspots" possible. These interactions depend on the size, charge, and concentration of the nanoparticles and affect proteasome activity in a time-dependent manner. Should metal oxide nanoparticles increase proteasome activity in cells, as they do in vitro, unintended effects related to changes in proteasome function can be expected.

Interaction of multiwalled carbon nanotubes with supported lipid bilayers and vesicles as model biological membranes

The influence of solution chemistry on the kinetics and reversibility of the deposition of multiwalled carbon nanotubes (MWNTs) on model biological membranes was investigated using a quartz crystal microbalance with dissipation monitoring (QCM-D). Supported lipid bilayers (SLBs) comprised of zwitterionic 1,2-dioleoyl-sn-glyero-3-phosphocholine (DOPC), as well as DOPC vesicles, were used as model cell membranes. Under neutral pH conditions, the deposition kinetics of MWNTs on SLBs increased with increasing electrolyte (NaCl and CaCl2) concentrations. In the presence of NaCl, favorable deposition was not achieved even at a concentration of 1 M, which is attributed to the presence of strong repulsive hydration forces due to the highly hydrophilic headgroups of SLBs. Conversely, favorable deposition was observed at CaCl2 concentrations above 0.5 mM when the charge of SLBs was reversed from negative to positive through the binding of Ca(2+) cations to the exposed phosphate headgroups. Favorable nanotube deposition was also observed at pH 2, at which the DOPC SLBs exhibited positive surface charge, since the isoelectric point of DOPC is ca. 4. When MWNTs on SLBs were rinsed with low ionic strength solutions at pH 7.3, only ca. 20% of deposited nanotubes were released, indicating that nanotube deposition was mostly irreversible. The deposition of MWNTs on DOPC vesicles under favorable deposition conditions did not result in any detectable leakage of solution from the vesicles, indicating that MWNTs did not severely disrupt the DOPC bilayers upon attachment.