Covalent layer-by-layer assembly of redox-active polymer multilayers

Printing "Smart" Inks of Redox-Responsive Organometallic Polymers on Microelectrode Arrays for Molecular Sensing

Printing arrays of responsive spots for multiplexed sensing with electrochemical readout requires new molecules and precise, high-throughput deposition of active compounds on microelectrodes with spatial control. We have designed and developed new redox-responsive polymers, featuring a poly(ferrocenylsilane) (PFS) backbone and side groups with disulfide units, which allow an efficient and stable bonding to Au substrates, using sulfur-gold coupling chemistry in a "grafting-to" approach. The polymer molecules can be employed for area selective molecular sensing following their deposition by high-precision inkjet printing. The new PFS derivatives, which serve as "molecular inks", were characterized by ¹H NMR, ¹³C NMR, and FTIR spectroscopies and by gel permeation chromatography. The viscosity and surface tension of the inks were assessed by rheology and pendant drop contact angle measurements, respectively. Commercial microelectrode arrays were modified with the new PFS ink by using inkjet printing in the "drop-on-demand" mode. FTIR spectroscopy, AFM, and EDX-SEM confirmed a successful, spatially localized PFS modification of the individual electrodes within the sensing cells of the microelectrode arrays. The potential application of these devices to act as an electrochemical sensor array was demonstrated with a model analyte, ascorbic acid, by using cyclic voltammetry and amperometric measurements.

Surface Functionalization of Silicon, HOPG, and Graphite Electrodes: Toward an Artificial Solid Electrolyte Interface

Electrografting of diazonium salts containing a protected alkyne moiety was used for the first functionalization of silicon and highly ordered pyrolytic graphite model surfaces. After deprotection with tetrabutylammonium fluoride, further layers were added by the thiol-yne click chemistry. The composition of each layer was characterized via X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. The same approach was then used to functionalize graphite powder electrodes, which are classically used as negative electrode in lithium-ion batteries. The effect of the coating on the formation of the solid electrolyte layer was investigated electrochemically by cyclovoltammetry and galvanostatic measurements. The modified graphite electrodes showed different reduction peaks in the first cycle, indicating reduced and altered decomposition processes of the components. Most importantly, the electrochemical investigations show a remarkable reduction of irreversible capacity loss of the battery.

Recent Trends in Metallopolymer Design: Redox-Controlled Surfaces, Porous Membranes, and Switchable Optical Materials Using Ferrocene-Containing Polymers

Metallopolymers with metal functionalities are a unique class of functional materials. Their redox-mediated optoelectronic and catalytic switching capabilities, their outstanding structure formation and separation capabilities have been reported recently. Within this Minireview, the scope and limitations of intriguing ferrocene-containing systems will be discussed. In the first section recent advances in metallopolymer design will be given leading to a plethora of novel metallopolymer architectures. Discussed synthetic pathways comprise controlled and living polymerization protocols as well as surface immobilization strategies. In the following sections, we focus on recent advances and new applications for side-chain and main-chain ferrocene-containing polymers as (i) remote-switchable materials, (ii) smart surfaces, (iii) redox-responsive membranes, and some recent trends in (iv) photonic structures and (v) other optical applications.

Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications

Covalent layer-by-layer (LbL) assembly is a powerful method used to construct functional ultrathin films that enables nanoscopic structural precision, componential diversity, and flexible design. Compared with conventional LbL films built using multiple noncovalent interactions, LbL films prepared using covalent crosslinking offer the following distinctive characteristics: (i) enhanced film endurance or rigidity; (ii) improved componential diversity when uncharged species or small molecules are stably built into the films by forming covalent bonds; and (iii) increased structural diversity when covalent crosslinking is employed in componential, spacial, or temporal (labile bonds) selective manners. In this review, we document the chemical methods used to build covalent LbL films as well as the film properties and applications achievable using various film design strategies. We expect to translate the achievement in the discipline of chemistry (film-building methods) into readily available techniques for materials engineers and thus provide diverse functional material design protocols to address the energy, biomedical, and environmental challenges faced by the entire scientific community.

Polyferrocenylsilanes: synthesis, properties, and applications

This comprehensive review covers polyferrocenylsilanes (PFSs), a well-established, readily accessible class of main chain organosilicon metallopolymer. The focus is on the recent advances involving PFS homopolymers and block copolymers and the article covers the synthesis, properties, and applications of these fascinating materials.

Organometallic polymers for electrode decoration in sensing applications

Macromolecules containing metals combine the processing advantages of polymers with the functionality offered by the metal centers. The developments in the area of electrochemical chemo/biosensors based on organometallic polymers are reviewed.

Sub-nanometer expansions of redox responsive polymer films monitored by imaging ellipsometry

We describe a novel approach to quantitatively visualize sub nm height changes occurring in thin films of redox active polymers upon reversible electrochemical oxidation/reduction in situ and in real-time with electrochemical imaging ellipsometry (EC-IE). Our approach is based on the utilization of a micro-patterned substrate containing circular patterns of passive (non-redox active) 11-mercapto-1-undecanol (MCU) within a redox-responsive oligoethylene sulfide end-functionalized poly(ferrocenyldimethylsilane) (ES-PFS) film on a gold substrate. The non-redox responsive MCU layer was used as a molecular reference layer for the direct visualization of the minute thickness variations of the ES-PFS film. The ellipsometric microscopy images were recorded in aqueous electrolyte solutions at potentials of -0.1 V and 0.6 V vs. Ag/AgCl corresponding to the reduced and oxidized redox states of ES-PFS, respectively. The ellipsometric contrast images showed a 37 (±2)% intensity increase in the ES-PFS layer upon oxidation. The thickness of the ES-PFS layer reversibly changed between 4.0 (±0.1) nm and 3.4 (±0.1) nm upon oxidation and reduction, respectively, as determined by IE. Additionally, electrochemical atomic force microscopy (EC-AFM) was used to verify the redox controlled thickness variations. The proposed method opens novel avenues to optically visualize minute and rapid height changes occurring e.g. in redox active (and other stimulus responsive) polymer films in a fast and non-invasive manner.

Surface engineering of titanium alloy substrates with multilayered biomimetic hierarchical films to regulate the growth behaviors of osteoblasts

Osseointegration is essential for the long-term survival of orthopedic implants. Inspired by the hierarchical structure of natural bone, we fabricated a hierarchical structure with osteoinduction potential on titanium alloy (Ti6Al7Nb) substrates via a spin-assisted layer-by-layer assembly technique, with hydroxyapatite nanofibers as the intercalated materials and gelatin and chitosan as the polycation and polyanion, respectively. The as-synthesized hydroxyapatite nanofibers were characterized using scanning electron microscopy (SEM), transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. The change of water contact angle corresponding to different layers indicated the formation of a multilayered structure, since different components have their inherent wettability natures. The multilayered lamellar structure was revealed by the cross-sectional view of SEM, suggesting that the film was successfully deposited onto Ti6Al7Nb substrates. Osteoblasts cultured on the hierarchical structure deposited Ti alloy substrates displayed significantly higher cell viability (P<0.01) and better adhesion, a higher production level of alkaline phosphatase, mineralization, genes expressions of osteocalcin and osteopontin (P<0.01 or P<0.05) compared to those of native Ti6Al7Nb substrates after culture for 4, 7 or 14days. These results indicated that the lamellar structure was beneficial for the biological functions of osteoblasts, establishing the basis for osseointegration of a titanium alloy implant.

H2O2-induced decomposition of layer-by-layer films consisting of phenylboronic acid-bearing poly(allylamine) and poly(vinyl alcohol)

Layer-by-layer (LbL) films were prepared by an alternate deposition of phenylboronic acid-bearing poly(allylamine hydrochloride) (PBA-PAH) and poly(vinyl alcohol) (PVA) on the surface of a quartz slide to develop thin films that can be decomposed in response to hydrogen peroxide (H2O2). The PBA-PAH/PVA films decomposed in the presence of H2O2; the degree and kinetics of decomposition depend on the concentration of H2O2 and on the pH of the solution. For example, the film decomposition completely occurred in 30 min in 1.0 mM H2O2 solution at pH 7.4, while it took 180 min in 0.1 mM H2O2 solution. The H2O2-induced decomposition of the film can be explained in terms of the oxidative scission of the carbon-boron bond in PBA residues in the PBA-PAH chains. A potential use of the PBA-PAH/PVA films in developing H2O2-sensitive delivery systems was suggested.