Bacteria-adsorbed palygorskite stabilizes the quaternary phosphonium salt with specific-targeting capability, long-term antibacterial activity, and lower cytotoxicity

Multifunctional honeysuckle extract/attapulgite/chitosan composite films containing natural carbon dots for intelligent food packaging

In order to fulfill people's requirements for food quality and safety, it is a promising strategy to develop intelligent biodegradable food packaging materials. Herein, honeysuckle extracts/attapulgite/chitosan composite films containing natural carbon dots were fabricated for intelligent food packaging. Different characterization techniques were employed to study the obtained composite films, while the physicochemical properties, optical properties, antibacterial and antioxidant activities of composite films were determined. The obtained composite films presented good mechanical, antibacterial and antioxidant properties, and the antibacterial ratios of composite films against Escherichia coli and Staphylococcus aureus were 99.27 ± 0.18 % and 98.85 ± 0.65 %, respectively. When the added amount of honeysuckle extracts/attapulgite nanocomposites was 4.76 %, the tensile strength and elongation at break of composite films reached 24.9 ± 2.35 MPa and 64.8 ± 2.11 %, respectively, which were obviously higher than that of pure chitosan film. Furthermore, the composite films exhibited excellent UV shielding and blue fluorescence properties, as well as pH-sensitivity due to the presence of caffeoquinic acid-based natural carbon dots derived from honeysuckle extract. Therefore, the composite films indicated a potential application for intelligent food packaging.

Synergistic Promotion System of Montmorillonite with Cu2+ and Benzalkonium Chloride for Efficient and Broad-Spectrum Antibacterial Activity

By intercalating montmorillonite (MMT) with Cu2+ and benzalkonium chloride (BAC), the present work constructed a synergistic promotion system (Cu2+/BAC/MMT). MMT not only enhances the thermal stability of Cu2+ and BAC but also facilitates the controlled release of Cu2+ and BAC. Concurrently, the introduction of BAC improves the material's organic compatibility. In vitro assays show that the "MIC+" of Cu2+/BAC/MMT against Staphylococcus aureus is merely 7.32 mg/L and 55.56 mg/L against Escherichia coli. At concentrations of 10 and 25 mg/L, Cu2+/BAC/MMT inactivates 100% of S. aureus and E. coli within 2 h, respectively. Furthermore, it is confirmed that the prepared Cu2+/BAC/MMT exhibits a long-term antibacterial ability through antibacterial experiments and release tests. Also, the biosafety of this material was also substantiated by in vitro cytotoxicity tests. These comprehensive findings indisputably portend that Cu2+/BAC/MMT holds promise to supplant antibiotics as an efficacious treatment modality for bacterial infections.

Dietary supplementation modified attapulgite promote intestinal epithelial barrier and regulate intestinal microbiota composition to prevent diarrhea in weaned piglets

Attapulgite is a kind of natural clay mineral. Its unique pore structure makes it an ideal adsorption material and carrier material. However, the beneficial effect of modified attapulgites (SLK) in livestock is still unknown. The study was aimed to investigate the beneficial effect of modified attapulgites on diarrhea. 135 piglets were randomly divided into 5 groups and fed with control diet, traditional antibiotic substitute (TAS) supplementation diet, 0.5 mg/kg SLK supplementation diet, 1 mg/kg SLK supplementation diet, and 1.5 mg/kg SLK supplementation diet. This experiment lased two weeks. According to our result, 1.5 mg/kg SLK supplementation diet significantly decreased diarrhea score and diarrhea frequency, and effectively increased survival rate (P < 0.05). Dietary supplementation with 1.5 mg/kg SLK significantly increased high density lipoprotein cholesterol (HDLC), and choline esterase (CHE) concentration in serum (P < 0.05). AS compared with TAS group, 1.5 mg/kg SLK supplementation diet significantly decreased villus height and increased goblet number in jejunum, and increased villus height and decreased goblet number in ileum (P < 0.05). 1.5 mg/kg SLK supplementation diet also significantly changed cecal microbial community composition, including increased Limosilactobacillus abundance (P < 0.05). 1.5 mg/kg SLK supplementation diet significantly increased colonic microbial community composition, including decreased Escherichia-shigella abundance and increased Limosilactobacillus abundance (P < 0.05). Moreover, 1.5 mg/kg SLK supplementation diet significantly increased valerate, propionate, butyrate, and total short chain fatty acid contents in colon (P < 0.05). Valerate, propionate, butyrate, and total short chain fatty acid significantly associated with Lactobacillus. Fourerenilla and Fourerenilla.unclassfied significantly associated with acetate contents in colon (P < 0.05). In conclusion, dietary supplementation with modified apptapulgites significantly regulate intestinal microbial community composition and alleviate intestinal epithelial barrier to prevent diarrhea in piglets.

Removal of Aflatoxin B1 and Zearalenone in Mixed Aqueous Solution by Palygorskite-Montmorillonite Materials In Situ Prepared from Palygorskite Mineral

In view of the animal feeds inevitably contaminated by multiple mycotoxins, eco-friendly and efficient palygorskite-montmorillonite (Pal-Mt) materials were prepared to remove polar aflatoxin B₁ (AFB₁) and weak polar zearalenone (ZEN) from mixed mycotoxins aqueous solution. The adsorption properties and bonding mechanisms between Pal-Mt materials and mycotoxins (AFB₁ and ZEN) were investigated systematically. The as-prepared Pal-Mt showed excellent adsorption capacity for AFB₁ and ZEN in single- and binary-mycotoxin systems, indicating the effectiveness of Pal-Mt acting as multiple mycotoxin adsorbents. The kinetics of adsorption for ZEN was fast due to the adsorption on the external surface (film and intraparticle diffusion), while AFB₁ molecules permeated into mesopores after the external adsorption for the more planar structure. Adsorption isotherms demonstrated that heterogeneous surface adsorption appeared between Pal-Mt and AFB₁, and monolayer adsorption occurred on Pal-Mt and ZEN for different polarities of mycotoxins. Thermodynamic parameters illustrated that the adsorption process of both AFB₁ and ZEN onto Pal-Mt was spontaneous and endothermic. The adsorption mechanism studies suggested that hydrogen bonding, electrostatic attraction, calcium bridging linkage, and ion-dipole played fundamental roles in the interaction between Pal-Mt and these two mycotoxins.

Fibrous Clays in Dermopharmaceutical and Cosmetic Applications: Traditional and Emerging Perspectives

Functionalization of natural clay minerals for high value-added pharmaceutical and cosmetic applications receives significant research attention worldwide attributable to a rising demand and ongoing search for green, efficient, economically sustainable and ecofriendly geomaterials. Fibrous clays, i.e. palygorskite and sepiolite, are naturally-occurring hydrated magnesium aluminum silicate clay minerals with 2:1 layer-chain microstructure and one-dimensional nanofibrous morphology. Due to their unique structural, textural and compatibility features, over the past decade, fibrous clays and their organic modified derivatives are increasingly used in the dermopharmaceutical and cosmetic fields as excipients, active agents or nanocarriers to develop novel skin delivery systems or to modify drug release profile for enhanced health effects. This comprehensive review presents the up-to-date information on fibrous clays used in topically-applied products for therapeutic and cosmetic purposes with the focus on their performance-related structural characteristics and the underlying mechanisms. The recent advancement of fibrous clay-based skin delivery systems was summarized in wide range of applications including pelotherapy, wound healing, antimicrobial action, coloration and UV protection. An overview of the commonly used topically-applied dosage forms (powders, hydrogels, films, peloids and Pickering emulsion) as well as the toxicological aspects was also included, which might provide guidance to the design and development of fibrous clay-based skin delivery systems.

Structural Evolution of Palygorskite as the Nanocarrier of Silver Nanoparticles for Improving Antibacterial Activity

The carrier performance of palygorskite (Pal) can be significantly affected by its structure, morphology, and activity, which was regulated by controlling the dissolution degree of the metal-oxygen octahedron of raw Pal (RPal) under the action of oxalic acid (OA) in this study. The RPal and OA-leached RPal (OPal) then served as supports for immobilizing silver nanoparticles (AgNPs) to form RPal/AgNPs and OPal/AgNPs antibacterial nanocomposites. The structural and morphological characterizations were used to confirm the dispersion uniformity of AgNPs on the RPal and OPal nanorods, and antibacterial experiments were conducted to evaluate the performance of as-prepared composites and also investigate their antibacterial mechanism. The results showed that OPal-48h (OA leaching for 48 h) loaded with AgNPs (OPal-48h/AgNPs) possesses the most excellent and broad-spectrum antibacterial properties, where its minimum inhibitory concentration values against E. coli, S. aureus, ESBL-E. coli, and MRSA reached 0.25, 0.125, 0.25, and 0.5 mg/mL, respectively, which are mainly attributed to the optimal balance between surface activity and structural stability of OPal-48h that maximally increased its dispersibility and active sites, therefore contributing to the in situ formation of monodisperse AgNPs on the nanorods of OPal-48h.

Dietary Palygorskite Clay-Adsorbed Nano-ZnO Supplementation Improves the Intestinal Barrier Function of Weanling Pigs

This study aimed to investigate the effects of PNZ on intestinal mucosal barrier function in weaning piglets. A total of 210, 21-day-old piglets with similar body weights (6.30 ± 0.51 kg) were randomly allocated into seven groups: control group (CON), antibiotic group (ANT), ZnO group (ZO), nano-ZnO group (NZO) and low, middle, and high PNZ groups (LPNZ, MPNZ, and HPNZ). The seven groups were, respectively, fed control diets or control diets supplemented with antibiotics; 3,000 mg/kg ZnO; 800 mg/kg nano-ZnO; 700, 1,000, or 1,300 mg/kg PNZ. More integrated intestinal villi were observed in the LPNZ group. In the jejunum of LPNZ group, the crypt depth significantly decreased (P < 0.05), and the ratio of villus height to crypt depth (V/C) significantly increased (P < 0.05). In addition, the villus width and surface area of the ileum were significantly increased in the LPNZ group (P < 0.05). Dietary supplementation with PNZ can significantly increase the number of goblet cells in the mucosa of the jejunum and ileum (P < 0.05), decrease the contents of TNF-α and IL-1β (P < 0.05), and increase the contents of sIgA and IL-4 in the jejunal and ileal mucosa (P < 0.05). Meanwhile, the mRNA expression of MCU2 and ZO1 in PNZ group were significantly increased (P < 0.05), the mRNA expression of TLR4 and MyD88 was downregulated (P < 0.05). With increasing levels of PNZ, decreased proinflammatory cytokines and increased intestinal mucosal barrier function in weaned pigs was observed. In conclusion, supplementation with PNZ could effectively improve the intestinal barrier function of weanling piglets and potentially could replace the use of high doses of ZnO and antibiotics. The appropriate dose of PNZ for supplementation was 700 mg/kg.

Facile Preparation of Organo-Modified ZnO/Attapulgite Nanocomposites Loaded with Monoammonium Glycyrrhizinate via Mechanical Milling and Their Synergistic Antibacterial Effect

In this study, monoammonium glycyrrhizinate (MAG) was introduced into cetyltrimethyl ammonium bromide (CTAB)-modified ZnO/attapulgite (APT) via a mechanical process to form performance-enhanced antibacterial nanocomposites (MAG/C–ZnO/APT). The APT supported ZnO nanocomposite (ZnO/APT) was prepared by a conventional precipitation method, and 20–50 nm of globular ZnO nanoparticles were uniformly decorated on APT nanorods. The FTIR and zeta potential analyses demonstrated that modification by CTAB facilitated the loading of MAG into ZnO/APT by H-bonding and electrostatic interactions. Antibacterial evaluation results indicate that MAG/C–ZnO/APT nanocomposites with CTAB and MAG doses of 2.5% and 0.25%, respectively, exhibited synergistically enhanced inhibitory activities against Escherichia coli, Staphylococcus aureus, Enterococcus faecalis, Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus and extended-spectrum β-lactamases Escherichia coli, with minimum inhibitory concentrations of 1, 0.1, 0.25, 5, 0.1, and 2.5 mg/mL, respectively, which are better than those of ZnO/APT, C–ZnO/APT and MAG. Moreover, the nanocomposites had low cytotoxicity on human normal cell line L-O2. Therefore, this study provided a more effective strategy to extend the antibacterial spectrum and strengthen the inhibitory effects of antibiotic-free materials to address increasingly serious situations of microbial infection.

Copper/Zinc-Modified Palygorskite Protects Against Salmonella Typhimurium Infection and Modulates the Intestinal Microbiota in Chickens

Palygorskite (Pal), a clay nanoparticle, has been demonstrated to be a vehicle for drug delivery. Copper has antibacterial properties, and zinc is an essential micronutrient for intestinal health in animals and humans. However, whether copper/zinc-modified Pal (Cu/Zn-Pal) can protect chickens from Salmonella enterica subsp. enterica serovar Typhimurium (S. Typhimurium) infection remains unclear. In this study, three complexes (Cu/Zn-Pal-1, Cu/Zn-Pal-2, and Cu/Zn-Pal-3) were prepared, and Cu/Zn-Pal-1 was shown to be the most effective at inhibiting the growth of S. Typhimurium in vitro, whereas natural Pal alone had no inhibitory effect. In vivo, Cu/Zn-Pal-1 reduced S. Typhimurium colonization in the intestine of infected chickens and relieved S. Typhimurium-induced organ and intestinal mucosal barrier damage. Moreover, this reduction in Salmonella load attenuated intestinal inflammation and the oxidative stress response in challenged chickens. Additionally, Cu/Zn-Pal-1 modulated the intestinal microbiota in infected chickens, which was characterized by the reduced abundance of Firmicutes and the increased abundance of Proteobacteria and Bacteroidetes. Our results indicated that the Cu/Zn-Pal-1 complex may be an effective feed supplement for reducing S. Typhimurium colonization of the gut.

A Novel 3D-bioprinted Porous Nano Attapulgite Scaffolds with Good Performance for Bone Regeneration

Background

Natural clay nanomaterials are an emerging class of biomaterial with great potential for tissue engineering and regenerative medicine applications, most notably for osteogenesis.

Materials and Methods

Herein, for the first time, novel tissue engineering scaffolds were prepared by 3D bioprinter using nontoxic and bioactive natural attapulgite (ATP) nanorods as starting materials, with polyvinyl alcohol as binder, and then sintered to obtain final scaffolds. The microscopic morphology and structure of ATP particles and scaffolds were observed by transmission electron microscope and scanning electron microscope. In vitro biocompatibility and osteogenesis with osteogenic precursor cell (hBMSCs) were assayed using MTT method, Live/Dead cell staining, alizarin red staining and RT-PCR. In vivo bone regeneration was evaluated with micro-CT and histology analysis in rat cranium defect model.

Results

We successfully printed a novel porous nano-ATP scaffold designed with inner channels with a dimension of 500 µm and wall structures with a thickness of 330 µm. The porosity of current 3D-printed scaffolds ranges from 75% to 82% and the longitudinal compressive strength was up to 4.32±0.52 MPa. We found firstly that nano-ATP scaffolds with excellent biocompatibility for hBMSCscould upregulate the expression of osteogenesis-related genes bmp2 and runx2 and calcium deposits in vitro. Interestingly, micro-CT and histology analysis revealed abundant newly formed bone was observed along the defect margin, even above and within the 3D bioprinted porous ATP scaffolds in a rat cranial defect model. Furthermore, histology analysis demonstrated that bone was formed directly following a process similar to membranous ossification without any intermediate cartilage formation and that many newly formed blood vessels are within the pores of 3D-printed scaffolds at four and eight weeks.

Conclusion

These results suggest that the 3D-printed porous nano-ATP scaffolds are promising candidates for bone tissue engineering by osteogenesis and angiogenesis.

Incorporation of quaternary ammonium chitooligosaccharides on ZnO/palygorskite nanocomposites for enhancing antibacterial activities

Quaternary ammonium chitooligosaccharides (QACOS) was incorporated onto the ZnO/palygorskite (ZnO/PAL) nanocomposite by a simple electrostatic self-assembly process to produce a new organic-inorganic nanocomposite (QACOS/ZnO/PAL) with excellent antibacterial activity. After loading QACOS, the Zeta potential of ZnO/PAL was changed from -26.7 to +30.3 mV, which facilitates to improve the targeting behavior of ZnO/PAL towards bacteria and its contact with bacteria, resulting in a significant improvement of antibacterial capability. The MIC values of QACOS/ZnO/PAL for inhibiting bacteria (0.5 mg/mL for E. coli and 1 mg/L for S. aureus) were superior to ZnO/PAL and QACOS, demonstrated an expected synergistic antibacterial effect between QACOS and ZnO/PAL. The improved contact and interface interaction between QACOS/ZnO/PAL and bacteria makes it easier to destroy the structural integrity of bacteria. As a whole, the incorporation of polysaccharide as regulators of surface charge opens up a new way to further enhance the antibacterial activity of inorganic antibacterial materials.

A facile preparation of a novel non-leaching antimicrobial waterborne polyurethane leather coating functionalized by quaternary phosphonium salt

The aim of this research is to develop a novel non-leaching antimicrobial waterborne polyurethane (WPU) leather coating material with covalently attached quaternary phosphonium salt (QPS). The structure of the QPS-bearing WPU has been identified, and their thermal stability, mechanical property, and antimicrobial performance have been investigated. The results reveal that the incorporation of QPS slightly reduces the thermal stability of WPU material but would not affects its usability as leather coating. Despite the presence of hydrophobic benzene in QPS structure, the strong hydration of its cationic groups leads to the increased surface contact angle (SCA) and water absorption rate (WAR) of the films, suggesting that the water resistance of the films needs to be improved for the purpose of leather coatings. Antibacterial tests demonstrate that when the QPS content is 20 wt%, QPS-bearing WPU shows effective antimicrobial activity against bacteria. The WPU containing QPS prepared in this study is a non-leaching antimicrobial material and has great potential application as leather coating.

Graphical abstract

GEO-PGS composite shows synergistic and complementary effect on Escherichia coli and improvement of intestinal dysfunction

Palygorskite (PGS) is a kind of clay minerals with the property of absorbent capacity, and ginger essential oil (GEO) is a kind of natural antibacterial substances. In the present study PGS was used as carrier of GEO, and thus, a kind of new anti-bacterial composite GEO-PGS has been obtained. Characterization, inhibitory effect of GEO-PGS on Escherichia coli (E. coli) and its function of improvement of intestinal health would be investigated. Results showed that characterization analysis of GEO-PGS (FTIR, TG-DSC, BET, Zeta potential, specific surface area, total pore volume and size, TEM observation) demonstrated combination of GEO and PGS, and GEO was absorbed on the surface of PGS, partially filled the micropores of PGS. GEO-PGS had obvious inhibitory effect on E.coli, in combination of the antibacterial activity of GEO and bacteria-absorbed capability of PGS. GEO-PGS also had ameliorating effect on enteritis and intestinal dysfunction in vivo, which might be related to the inhibition of gene expression of inflammatory cytokines (TLR2, IL-6, TNFα, and IL-8). In conclusion, the novel composite GEO-PGS has the potential usage as functional component having effect of improving intestinal health.

Construction of cellulose nanofibers/quaternized chitin/organic rectorite composites and their application as wound dressing materials

Traumatic injury is a major cause of mortality, and poor wound healing affects millions of people. Thus, the development of effective wound dressings is essential for speeding up wound healing and decreasing mortality. In this study, a suspension of carboxylated brown algae cellulose nanofibers (BACNFs) with a high aspect ratio was freeze dried to prepare a sponge. The sponge showed high porosity and water absorption capacity; thus, it can absorb wound exudates when used as a wound dressing. In addition, quaternized β-chitin (QC) with antibacterial properties was intercalated into the interlayer space of the organic rectorite (OREC) via electrostatic interactions to obtain composite suspensions (QCRs) with improved antimicrobial activity compared to that of QC alone. Subsequently, the BACNF sponge was soaked in the QCR suspension to absorb QCRs via electrostatic interactions and hydrogen bonding from which cellulose nanofiber/quaternized chitin/organic rectorite composite (BACNF/QCR) sponges were constructed via freeze-drying. The in vivo animal tests demonstrated that the BACNF/QCR sponges rapidly induced hemostasis in a rat tail amputation test, making them superior to the traditional hemostatic materials. Furthermore, BACNFs/QCRs could substantially promote collagen synthesis and neovascularization, thereby accelerating wound healing 3 days earlier than gauze. This multi-functional biomedical material, fabricated using natural substances, shows great potential to be used for wound healing.

Hydrothermal Fabrication of Spindle-Shaped ZnO/Palygorskite Nanocomposites Using Nonionic Surfactant for Enhancement of Antibacterial Activity

In order to improve the antibacterial performance of natural palygorskite, spindle-like ZnO/palygorskite (ZnO/PAL) nanocomposites with controllable growth of ZnO on the surface of PAL were prepared in the presence of non-ionic surfactants using an easy-to-operate hydrothermal method. The obtained ZnO/PAL nanocomposites have a novel and special spindle-shaped structure and good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and are also low cost. The minimum inhibitory concentrations of ZnO/PAL nanocomposites toward E. coli and S. aureus reached 1.5 and 5 mg/mL, respectively.

Integrating Nano-Cu₂O@ZrP into In Situ Polymerized Polyethylene Terephthalate (PET) Fibers with Enhanced Mechanical Properties and Antibacterial Activities

The approach of in situ polymerization modification has proven to be an effective route for introducing functions for polyester materials. In this work, Cu₂O@ZrP nanosheets with excellent dispersity and high antibacterial activity were integrated into in situ polymerized polyethylene terephthalate (PET) fibers, revealing an enhanced mechanical performance in comparison with the PET fibers fabricated directly via a traditional melt blending method. Additionally, such an in situ polymerized PET/Cu₂O@ZrP fibers displayed highly enhanced mechanical properties; and great antibacterial activities against multi-types of bacterium, including S. aureus, E. coli and C. albicans. For the as-obtained two types of PET/Cu₂O@ZrP fibers, we have detailed their molecular weight (detailed molecular weight) and dispersibility of nano-Cu₂O@ZrP and fibers crystallinity was investigated by Gel chromatography (GPC), Scanning electron microscope (SEM), and X-ray diffractometer (XRD), respectively. The results showed that the aggregation of the nano-Cu₂O@ZrP in the resultant PET matrix could be effectively prevented during its in situ polymerization process, hence we attribute its highly enhanced mechanical properties to its superior dispersion of nano-Cu₂O@ZrP.

Fabrication of Few-Layered Porous Graphite for Removing Fluorosurfactant from Aqueous Solution

Due to the persistence, toxicity, and widespread occurrence of fluorosurfactants in the blood of general population, it is very important to develop recyclable and highly effective adsorbent material for their removal from aqueous solution. Herein, a new type of few-layered porous graphite (FPG) was fabricated as an adsorbent, and the adsorption characteristics of FPG toward potassium perfluorobutane sulfonate (PFBS), potassium perfluorohexane sulfonate (PFHxS), and potassium perfluorooctane sulfonate (PFOS) in environmental cleanup were evaluated under laboratory condition. The results indicated that the as-prepared FPG had sorption capacities of 1.22, 1.52, and 2.48 mmol g^-1 for PFBS, PFHxS, and PFOS, respectively, which were the highest adsorption values of PFHxS, PFBS, and PFOS on different kinds of today's carbon materials. The efficiency of FPG remained almost constant during the first five cycles of the adsorption-desorption process after heating. The outstanding adsorption performance of FPG was attributed to its unique physical properties, such as high porosity, high hydrophobicity, low density, and excellent heat stability. The findings presented herein indicated that FPG could serve as a promising adsorbent for the removal of fluorosurfactant in waste water.

Sustained antibacterial activity of berberine hydrochloride loaded supramolecular organoclay networks with hydrogen-bonding junctions

The environmental risk from antibiotics is an issue of increasing concern. So, carboxymethyl β-cyclodextrin-functionalized montmorillonite nanosheets were for the first time successfully synthesized through a cheap, environmentally friendly and scalable approach and confirmed by FTIR, XRD and TGA. FE-SEM investigation showed that the resulting functional material could be further self-assembled into dense supramolecular organoclay networks (D-networks). The antibacterial properties of the D-networks loaded with natural berberine hydrochloride (BBH) were investigated toward E. coli and S. aureus by using colony growth on agar plates, bacterial growth curves based on optical densities, and confocal and fluorescence microscopy. Our studies demonstrated that the BBH loaded D-network antibacterial activity was concentration dependent and significantly exceeded that of free BBH. FE-SEM observation confirmed that E. coli and S. aureus can directly contact the D-networks and confocal and fluorescence microscopy showed that free BBH was only very poorly internalized, while the BBH released from the BBH-loaded D-network could be internalized efficiently into bacterial cells, resulting in an increment of the intracellular BBH level compared with the free BBH group. Time-dependent antibacterial activity was observed and it was found that the BBH-loaded D-network dispersion at the BBH dosage of 600 μg mL^-1 almost completely suppressed the growth of E. coli, leading to a viability loss of up to 98.45 ± 1.22%, while the BBH-loaded D-network dispersion at the BBH concentration of 250 μg mL^-1 exhibited a growth inhibition of 97.81 ± 0.83% toward S. aureus over three days. Our results suggest that supramolecular organoclay networks, in the future, may function as promising antibacterial drug carrier systems to promote BBH delivery in E. coli and S. aureus, which can reduce the environmental risk of antibiotics.

Halloysite Nanotubes Supported Ag and ZnO Nanoparticles with Synergistically Enhanced Antibacterial Activity

Novel antimicrobial nanocomposite incorporating halloysite nanotubes (HNTs) and silver (Ag) into zinc oxide (ZnO) nanoparticles is prepared by integrating HNTs and decorating Ag nanoparticles. ZnO nanoparticles (ZnO NPs) and Ag nanoparticles (Ag NPs) with a size of about 100 and 8 nm, respectively, are dispersively anchored onto HNTs. The synergistic effects of ZnO NPs, Ag NPs, and HNTs led to the superior antibacterial activity of the Ag-ZnO/HNTs antibacterial nanocomposites. HNTs facilitated the dispersion and stability of ZnO NPs and brought them in close contact with bacteria, while Ag NPs could promote the separation of photogenerated electron-hole pairs and enhanced the antibacterial activity of ZnO NPs. The close contact with cell membrane enabled the nanoparticles to produce the increased concentration of reactive oxygen species and the metal ions to permeate into the cytoplasm, thus induced quick death of bacteria, indicating that Ag-ZnO/HNTs antibacterial nanocomposite is a promising candidate in the antibacterial fields.

Characterization of ginger essential oil/palygorskite composite (GEO-PGS) and its anti-bacteria activity

To explore a novel kind of anti-bacterial composite material having the excellent antibacterial ability, stability and specific-targeting capability, palygorskite (PGS) was used as the carrier of ginger essential oil (GEO) and a novel kind of composite GEO-PGS was prepared by ion exchange process. The characterization and the antibacterial activity of GEO-PGS was investigated in this study. Results of FTIR, XPS, XRD,TG analysis and SEM observation demonstrated the combination of GEO and PGS, GEO was absorbed on the surface of PGS, and the content of GEO in the composite was estimated to be 18.66%. Results of minimal inhibitory concentration (MIC) analysis, growth curve and Gram staining analysis of Staphylococci aureus and Escherichia coli exposed to GEO-PGS showed that GEO-PGS had much higher antibacterial activity than GEO, and GEO-PGS had the specific-targeting antibacterial capability. Moreover, GEO-PGS showed the characteristics of thermo-stability, acidity and alkalinity-resistance in exerting its anti-bacteria activity. In conclusion, the novel composite GEO-PGS combined the bacteria-absorbent activity of PGS and the antibacterial activity of GEO, suggesting the great potential application of GEO-PGS as the novel composite substance with high antibacterial activity.

Preparation, characterization, antimicrobial and cytotoxicity studies of copper/zinc- loaded montmorillonite

Background

A series of modified montmorillonites (Mt) including zinc-loaded Mt (Zn-Mt), copper-loaded Mt (Cu-Mt), copper/zinc-loaded Mt with different Cu/Zn ratio (Cu/Zn-Mt-1, Cu/Zn-Mt-2, Cu/Zn-Mt-3) were prepared by an ion-exchange reaction, and characterized using X-ray diffraction (XRD), fourier transformed infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The specific surface areas, antimicrobial activity and cytotoxicity of the modified Mt were investigated.

Results

In the modified Mt, hydrated Cu ions and Zn ions were exchanged in the interlayer space of Mt and the particles were irregular shapes. The results showed that Cu/Zn-Mt enhanced antibacterial and antifungal activity compared with Zn-Mt and Cu-Mt possibly due to the synergistic effect between Cu and Zn. Among the Cu/Zn-Mt with different Cu/Zn raitos, Cu/Zn-Mt with a Cu/Zn ratio of 0.98 or 0.51 showed higher antimicrobial activity against gram-negative bacteria (Escherichia coli), gram-positive bacteria (Staphylococcus aureus), fungi (Candida albicans). Moreover, the antimicrobial activity of Cu/Zn-Mt was correlated with its specific surface area. Cytotoxicity studies on IPEC-J2 cell showed a slight cytotoxicity of Cu/Zn-Mt.

Conclusions

The current data provide clear evidence that in terms of its antimicrobial activity and relatively low toxicity, the Cu/Zn-Mt holds great promise for applications in animal husbandry.

Colorful Superamphiphobic Coatings with Low Sliding Angles and High Durability Based on Natural Nanorods

Superamphiphobic coatings with low sliding angles (SAs) and high durability are very attractive in academic and industrial areas but are very challenging to invent. Here, inspired by Maya Blue, we report for the first time colorful superamphiphobic coatings with low SAs and high durability by the combination of natural palygorskite (PAL) nanorods and organosilanes. The coatings were characterized using a wide range of electron microscopy and other analytical techniques. Different from the previously reported methods, the micro/nanostructure of the superamphiphobic coatings were constructed by using the abundant natural PAL nanorods as the building blocks. Superamphiphobicity of the coatings depends on surface morphology and chemical composition of the coatings, which can be regulated by the concentrations of PAL and organosilanes. The colorful superamphiphobic coatings feature high contact angles and low SAs for various liquids, including water and n-decane. The coatings also showed high mechanical, environmental, chemical, and thermal durability even under harsh conditions. Moreover, the coatings in different colors with comparable superamphiphobicity and durability can be prepared using different cationic dyes applied onto various substrates via the same approach. The colorful superamphiphobic coatings with low SAs and high durability may be useful in various fields, e.g., anticreeping of oils and restoration of cultural relics.

Solvatochromic Coatings with Self-Cleaning Property from Palygorskite@Polysiloxane/Crystal Violet Lactone

Organic allochroic materials have wide potential applications in various fields but have so far been limited because of their low stability and low and slow switching reversibility. Because of the extraordinarily high durability of Maya Blue and the superhydrophobic lotus leaves, the new solvatochromic and self-cleaning coatings with intense blue color are fabricated by the combination of polysiloxane-modified palygorskite (PAL@POS) and crystal violet lactone (CVL) via solid-state grinding. The coatings are characterized using scanning electron microscopy, diffusive reflection UV-vis spectra, and other analytical techniques. The hydrogen bonding of the hydroxyl groups of PAL@POS with the carboxylate groups of CVL⁺ is the origin of the intense blue color. The interruption of the hydrogen bonding by the vapor of solvents results in rapid discoloration of the coating. On the other hand, the evaporation of the solvents from the coating results in complete recovery of the original color by restoring the hydrogen bonding between PAL@POS and CVL⁺. The polarity, hydrogen bonding ability, and volatility of the solvents determine the solvatochromic properties of the coating. The PAL@POS/CVL coatings feature high reversibility and rapid switching between the colored and colorless states induced by the vapor of various solvents. Also, the coatings are superhydrophobic with fine self-cleaning properties and high durability in different environments. Moreover, the CVL content in the coating is controllable and can be as high as 4.8 wt %.

Lower cytotoxicity, high stability, and long-term antibacterial activity of a poly(methacrylic acid)/isoniazid/rifampin nanogel against multidrug-resistant intestinal Mycobacterium tuberculosis

To overcome the undesirable side effects and reduce the cytotoxicity of isoniazid (INH) and rifampin (RMP) in the digestive tract, a poly(methacrylic acid) (PMAA) nanogel was developed as a carrier of INH and RMP. This PMAA/INH/RMP nanogel was prepared as a treatment for intestinal tuberculosis caused by multidrug-resistant Mycobacterium tuberculosis (MTB). The morphology, size, and in vitro release properties were evaluated in a simulated gastrointestinal medium, and long-term antibacterial performance, cytotoxicity, stability, and activity of this novel PMAA/INH/RMP nanogel against multidrug-resistant MTB in the intestine were investigated. Our results indicate that the PMAA/INH/RMP nanogel exhibited extended antibacterial activity by virtue of its long-term release of INH and RMP in the simulated gastrointestinal medium. Further, this PMAA/INH/RMP nanogel exhibited lower cytotoxicity than did INH or RMP alone, suggesting that this PMAA/INH/RMP nanogel could be a more useful dosage form than separate doses of INH and RMP for intestinal MTB. The novel aspects of this study include the cytotoxicity study and the three-phase release profile study, which might be useful for other researchers in this field.

From broad-spectrum biocides to quorum sensing disruptors and mussel repellents: antifouling profile of alkyl triphenylphosphonium salts

'Onium' compounds, including ammonium and phosphonium salts, have been employed as antiseptics and disinfectants. These cationic biocides have been incorporated into multiple materials, principally to avoid bacterial attachment. In this work, we selected 20 alkyl-triphenylphosphonium salts, differing mainly in the length and functionalization of their alkyl chains, in fulfilment of two main objectives: 1) to provide a comprehensive evaluation of the antifouling profile of these molecules with relevant marine fouling organisms; and 2) to shed new light on their potential applications, beyond their classic use as broad-spectrum biocides. In this regard, we demonstrate for the first time that these compounds are also able to act as non-toxic quorum sensing disruptors in two different bacterial models (Chromobacterium violaceum and Vibrio harveyi) as well as repellents in the mussel Mytilus galloprovincialis. In addition, their inhibitory activity on a fouling-relevant enzymatic model (tyrosinase) is characterized. An analysis of the structure-activity relationships of these compounds for antifouling purposes is provided, which may result useful in the design of targeted antifouling solutions with these molecules. Altogether, the findings reported herein provide a different perspective on the biological activities of phosphonium compounds that is particularly focused on, but, as the reader will realize, is not limited to their use as antifouling agents.

The use of poly(methacrylic acid) nanogel to control the release of amoxycillin with lower cytotoxicity

In order to control the release of amoxycillin (AM) with lower cytotoxicity and higher activity, ethylene glycol dimethacrylate was used as the cross-linker, and a series of poly(methacrylic acid) (PMAA) nanogels were prepared to load the AM. Then, the morphology, size, in vitro release property, long-term antibacterial performance, cytotoxicity, stability and activity of this novel AM/PMAA nanogel were investigated. The results showed that the AM/PMAA nanogel sustainably released AM with long-term antibacterial activity. Moreover, the AM/PMAA nanogel could improve the stability of AM. More importantly, this AM/PMAA nanogel showed slighter cytotoxicity than AM alone, suggesting that the AM/PMAA nanogel was a more useful dosage form than AM for infectious diseases.

Tailored silica-antibiotic nanoparticles: overcoming bacterial resistance with low cytotoxicity

New and more aggressive antibiotic resistant bacteria arise at an alarming rate and represent an ever-growing challenge to global health care systems. Consequently, the development of new antimicrobial agents is required to overcome the inefficiency of conventional antibiotics and bypass treatment limitations related to these pathologies. In this study, we present a synthesis protocol, which was able to entrap tetracycline antibiotic into silica nanospheres. Bactericidal efficacy of these structures was tested against bacteria that were susceptible and resistant to antibiotics. For nonresistant bacteria, our composite had bactericidal efficiency comparable to that of free-tetracycline. On the other hand, the synthesized composites were able to avoid bacterial growth of resistant bacteria while free-tetracycline has shown no significant bactericidal effect. Finally, we have investigated the cytotoxicity of these nanoparticles against mammalian cells to check any possible poisoning effect. It was found that these nanospheres are not apoptosis-inducers and only a reduction on the cell replication rate was seen when compared to the control without nanoparticles.

Design and in vitro evaluation of a novel poly(methacrylic acid)/metronidazole antibacterial nanogel as an oral dosage form

To overcome the undesirable side-effects of metronidazole (MTZ), ethylene glycol dimethacrylate is used as the cross-linker, and a series of poly(methacrylic acid) (PMAA) nanogels were prepared to load the MTZ. We investigated the morphology, size, in vitro release property in the simulated gastrointestinal medium, long-term antibacterial performance against Bacteroides fragilis, cytotoxicity, stability and activity of this novel MTZ/PMAA nanogel. The results indicate that the MTZ/PMAA nanogel sustained the release of MTZ in long-term antibacterial activity in the simulated gastrointestinal medium. This MTZ/PMAA nanogel exhibits less cytotoxicity than MTZ alone, suggesting that MTZ/PMAA nanogel is a more useful dosage form than MTZ for mild-to-moderate Clostridium difficile infections. The novel aspects of this study include the synthesis of a nanogel and the three-phase study of the release profile, which might be useful for other researchers in this field.