Novel formation of Ag/Au bimetallic nanoparticles by physical mixture of monometallic nanoparticles in dispersions and their application to catalysts for aerobic glucose oxidation

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Plastic waste pollution is the serious environmental problem, and catalytic pyrolysis of waste plastics is an effective way to solve this problem. Carbon nanotubes (CNTs) are prepared by catalytic pyrolysis of low-density polyethylene (LDPE) waste plastics by one-stage method using iron nitrate and nickel nitrate as catalyst. The growth mechanism of CNTs is analyzed in detail. TPO, XRD, SEM and Raman analyses show that increasing Ni content contributes to the production of CNTs with good morphology and high graphitization degree. While the increasing Fe content contributes to improving the yield of CNTs. The outer and inner diameters of the FeNi12-CNTs-800 are about 21 nm and 8 nm with the length of 18.9 μm, respectively. LDPE pyrolysis gases are analyzed to determine that the primary carbon source required for CNTs growth is C2H4. The C2H4 adsorption and decomposition processes on FeNi alloys are performed to reveal the growth mechanism of CNTs, based on density functional theory calculation. Three kinds of the growth models are proposed to explain the difference of the CNTs tubular shape. FeNi12-CNTs-800 are used to remove microplastics from wastewater due to existence of magnetic. PVC can be quickly removed from wastewater with removal of 100 % at 20 min. This study provides an effective way for recycling and treatment of waste plastic.

Au@Ag nanoparticles: an analytical tool to study the effect of tyrosine on dopamine levels

The neurotransmitter dopamine (DA) plays important roles in the human body, including regulatory functions, movement, memory and motivational control. The direct intake of DA is impossible as it cannot cross the blood-brain barrier (BBB) efficiently. Notably, l-tyrosine works as a precursor of DA in the human brain. Herein, we report an analytical method that strongly supports the hypothesis that the intake of tyrosine (Tyr)-rich food enhances DA levels. For this analysis, citrate-coated gold-core silver-shell nanoparticles (Au@Ag NPs) were synthesized. The interaction of DA with the Au@Ag NPs was investigated using multiple spectroscopic techniques, and different thermodynamic parameters were evaluated to assign the binding mechanism. Real sample analysis with Tyr-rich food was also conducted to study the effect of Tyr on DA levels. Analytical studies were performed to verify the outcomes of the present work. The limit of detection of the Au@Ag NPs-DA system for Tyr was found to be 1.64 mM. This study can contribute to development in the fields of medicine and pharmaceuticals, particularly in regard to neuromedicine. One of the major advantages of this investigation is that it will fuel research interest in the supplementation of neurotransmitters and help categorize Tyr as a dietary precursor of dopamine.

Potential use of gold-silver core-shell nanoparticles derived from Garcinia mangostana peel for anticancer compound, protocatechuic acid delivery

Colorectal cancer is one of the most killing cancers and this has become a global problem. Current treatment and anticancer drugs cannot specifically target the cancerous cells, thus causing toxicity towards surrounding non-cancer cells. Hence, there is an urgent need to discover a more target-specific therapeutic agent to overcome this problem. Core-shell nanoparticles have emerged as good candidate for anticancer treatment. This study aimed to synthesize core-shell nanoparticles via green method which utilised crude peels extract of Garcinia mangostana as reducing and stabilising agents for drug delivery. Gold-silver core-shell nanoparticles (Au-AgNPs) were synthesized through seed germination process in which gold nanoparticles acted as the seed. A complete coating was observed through transmission electron microscopy (TEM) when the ratio of AuNPs and AgNPs was 1:9. The size of Au-AgNPs was 38.22 ± 8.41 nm and was mostly spherical in shape. Plant-based drug, protocatechuic acid (PCA) was loaded on the Au-AgNPs to investigate their anticancer activity. In HCT116 colon cancer cells, PCA-loaded Au-AgNPs (IC₅₀ = 10.78 μg/ml) showed higher inhibitory action than the free PCA (IC₅₀= 148.09 μg/ml) and Au-AgNPs alone (IC₅₀= 24.36 μg/ml). Up to 80% inhibition of HCT116 cells was observed after the treatment of PCA-loaded Au-AgNPs at 15.63 μg/ml. The PCA-loaded Au-AgNPs also showed a better selectivity towards HCT116 compared to CCD112 colon normal cells when tested at the same concentrations. These findings suggest that Au-AgNPs system can be used as a potent nanocarrier to combat cancerous cells by offering additional anticancer properties to the loaded drug.

Optimization of the Synthesis of Fungus-Mediated Bi-Metallic Ag-Cu Nanoparticles

Bi-metallic nanoparticles (NPs) have appeared to be more efficient as antimicrobials than mono-metallic NPs. The fungus Aspergillus terreus-mediated synthesis of bi-metallic Ag-Cu NPs was optimized using response surface methodology (RSM) to reach the maximum yield of NPs. The optimal conditions were validated using ANOVA. The optimal conditions were 1.5 mM total metal (Ag + Cu) concentration, 1.25 mg fungal biomass, 350 W microwave power, and 15 min reaction time. The structure and shape of the synthesized NPs (mostly 20–30 nm) were characterized using several analytical tools. The biological activities of the synthesized NPs were assessed by studying their antioxidant, antibacterial, and cytotoxic activity in different NP concentrations. A dose-dependent response was observed in each test. Bi-metallic Ag-Cu NPs inhibited three clinically relevant human pathogens: Klebsiella pneumoniae, Enterobacter cloacae, and Pseudomonas aeruginosa. Escherichia coli, Enterococcus faecalis, and Staphylococcus aureus were inhibited less. The DPPH and hydrogen peroxide scavenging activities of the NPs were high, reaching 90% scavenging. Ag-Cu NPs could be studied as antimicrobials in different applications. The optimization procedure using statistical analyses was successful in improving the yield of nanoparticles.

ISOBAM-stabilized Ni2+ colloidal catalysts: high catalytic activities for hydrogen generation from hydrolysis of KBH4

ISOBAM-104-stabilized Ni²⁺ colloidal catalysts were synthesized through a facile method and used for hydrogen generation from hydrolysis of potassium borohydride (KBH₄). Ni nanoparticles (NPs) were formed as the active phase during the catalytic process. Ultraviolet-visible spectrophotometry (UV-vis) and transmission electron microscopy were employed to characterize the structure and particle size of the as-formed Ni NPs. The results suggested that the catalytic activity of Ni²⁺ colloidal catalyst increased with the decreased size of as-formed Ni NPs, which is consistent with the results of density functional theory calculation. The highest catalytic activity of the catalyst can be 12400 ml-H₂ min^-1 g-Ni^-1, which was even higher than that of noble Pt or Pd colloidal catalysts prepared using identical methods and catalytic conditions. According to the Arrhenius method, the ISOBAM-104-stabilized Ni²⁺ colloidal catalysts showed low activation energies of about 41.3 kJ mol^-1 for the hydrogen generation from hydrolysis basic KBH₄ solution.

Vapor-phase Synthesis of Bimetallic Plasmonic Nanoparticles

Regulating the nanostructure of composite nanoparticles is essential for making them suitable for various applications. In general, the chemical reduction method is employed for preparing metal nanoparticles in the liquid phase. However, complicated techniques are required to control the nanostructure during particle synthesis. The evaporation/condensation method is used for synthesizing nanoparticles in the vapor-phase. Although this method produces impurity-free particles without aggregation, very few studies have been carried out on the synthesis of composite particles in the vapor-phase. In this study, we synthesized composite nanoparticles in the vapor-phase by using the evaporation/condensation method. The results showed that bimetallic nanoparticles are produced by this method. Moreover, it was indicated that the nanostructure of the synthesized nanoparticles is influenced by the order of the electric furnace with different temperatures.

Oxidation of lignocellulosic platform molecules to value-added chemicals using heterogeneous catalytic technologies

This minireview gives an overview about heterogeneous catalytic technologies for the oxidation of key platform molecules (glucose, 5-hydroxymethylfurfural, furfural and levulinic acid) into valuable chemicals.

Recent progress in the synthesis and applications of 2D metal nanosheets

The design and controlled synthesis of two-dimensional (2D) nanomaterials have been widely studied because the properties and functions of nanomaterials are highly dependent on their sizes, shapes, and dimensionalities. For instance, 2D metal nanosheets (2DMNSs) have attracted a significant amount of attention owing to their interesting properties, which are absent in corresponding bulk counterparts, and they have been confirmed to have potential applications in electrocatalysis, optics, and biomedicine. However, because of the close-packed structures of metals, the large-scale fabrication of 2DMNSs is challenging. In this review, we have outlined the research progress in the field of 2DMNSs, including the typical synthesis approaches and newly developed methods, as well as promising applications of the materials reported in recent years. Moreover, some preliminary and promising strategies to further improve the properties of 2DMNSs and some insights for the development of the field have been included.

Ag-Based nanocomposites: synthesis and applications in catalysis

Ag-Based nanocomposites, including supported Ag nanocomposites and bimetallic Ag nanocomposites, have been intensively investigated as highly efficient catalysts because of their high activity and stability, easy preparation, low cost, and low toxicity. Herein, we systematically summarize and comprehensively evaluate versatile synthetic strategies for the preparation of Ag-based nanocomposites, and outline their recent advances in catalytic oxidation, catalytic reduction, photocatalysis and electrocatalysis. In addition, the challenges and prospects related to Ag-based nanocomposites for various catalytic applications are also discussed. In light of the most recent advances in Ag-based nanocomposites for catalysis applications, this review provides a comprehensive assessment on the material selection, synthesis and catalytic characteristics of these catalysts, which offers a strategic guide to build a close connection between Ag nanocomposites and catalysis applications.

Au-Ag Nanoflower Catalysts with Clean Surfaces for Alcohol Oxidation

Shape-controlled metal nanocrystals, such as nanowires and nanoflowers, are attractive owing to their potentially novel catalytic properties and bimetallic nanocrystals composed of two distinct metals are expected to act as highly active catalysts. However, their catalytic activities are limited because of the capping agents adsorbed on the metal surfaces, which are necessary for the preparation and dispersion of these nanocrystals in solvents. Therefore, the preparation of bimetallic shape-controlled noble metal nanocrystals with clean surfaces, devoid of almost all capping agents, are expected to have high catalytic activity. Herein, we report the preparation of bimetallic Au-Ag nanoflowers using melamine as the capping agent. The bimetallic Au-Ag nanoflowers with a clean surface were subsequently obtained by a support and extraction method. The bimetallic nanoflowers with a clean surface were then used for the aerobic oxidation of 1-phenylethyl alcohol and they exhibited high rates for the formation of acetophenone compared to Au nanoflowers and spherical nanoparticles with almost the same size and Au/Ag ratio. We also show that Au-Ag nanoflowers containing only 1 % Ag (Au₉₉ -Ag₁ NFs) exhibit the highest rate of acetophenone formation among Au-Ag nanoflowers with different Au/Ag ratios owing to an increase in the electron density of the Au atoms that act as active sites for the oxidation of 1-phenylethyl alcohol.

Synthesis of Carbon Nanotube Arrays with High Aspect Ratio via Ni-Catalyzed Pyrolysis of Waste Polyethylene

Carbon nanotube (CNT) arrays 30–50 nm in diameter and with a length of several micrometers were prepared by catalytic pyrolysis of waste polyethylene in Ar at 773−1073 K using nickel dichloride as a catalyst precursor. X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectrometry (Raman), a vibrating-sample magnetometer (VSM), and nitrogen adsorption/desorption were used to investigate the effects of the pyrolysis temperature and catalyst contents on the preparation of the aligned CNTs. As results, the as-obtained CNTs had an outer diameter of 30 nm, a wall thickness of 10 nm, and a length of about 50 μm, and their aspect ratio was high up to 1500. The aligned CNTs containing 0.75 wt% Ni prepared at 973 K exhibited good adsorption performance for methylene blue (MB); furthermore, benefiting from the special magnetic properties of residual Ni catalysts, the as-obtained CNTs could be easily magnetically recycled from the treated solution after adsorption.

Morphology, Optical Properties and Photocatalytic Activity of Photo- and Plasma-Deposited Au and Au/Ag Core/Shell Nanoparticles on Titania Layers

Titania is a promising material for numerous photocatalytic reactions such as water splitting and the degradation of organic compounds (e.g., methanol, phenol). Its catalytic performance can be significantly increased by the addition of co-catalysts. In this study, Au and Au/Ag nanoparticles were deposited onto mesoporous titania thin films using photo-deposition (Au) and magnetron-sputtering (Au and Au/Ag). All samples underwent comprehensive structural characterization by grazing incidence X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Nanoparticle distributions and nanoparticle size distributions were correlated to the deposition methods. Light absorption measurements showed features related to diffuse scattering, the band gap of titania and the local surface plasmon resonance of the noble metal nanoparticles. Further, the photocatalytic activities were measured using methanol as a hole scavenger. All nanoparticle-decorated thin films showed significant performance increases in hydrogen evolution under UV illumination compared to pure titania, with an evolution rate of up to 372 μL H₂ h−1 cm−2 representing a promising approximately 12-fold increase compared to pure titania.

Kinetics of Spontaneous Bimetallization between Silver and Noble Metal Nanoparticles

A physical mixture of polymer-protected Ag nanoparticles and Rh, Pd, or Pt nanoparticles spontaneously forms Ag-core bimetallic nanoparticles. The formed nanoparticles were smaller than the parent Ag nanoparticles. In the initial process of this reaction, the surface plasmon absorption of Ag nanoparticles diminished and then almost ceased within one hour. Within several minutes, the decrease in Ag surface plasmon absorption could be analyzed by second-order reaction. This reaction was accelerated with an increase of temperature and the energy gap in the Fermi level between Ag and the other metals. The activation energy (Ea ) of this reaction could be determined. An electron transfer reaction from Ag to other metal nanoparticles was proposed as the initial interaction between these metal nanoparticles because the Fermi level of Ag is relatively high, and the electron transfer is possible in terms of energy. The Marcus plot between the rate constant and the driving force, roughly estimated from the work function of metals, and the observed Ea values reasonably explained the proposed electron transfer mechanism.

Catalytic oxidation of carbohydrates into organic acids and furan chemicals

A review on the development of new routes for the production of organic acids and furan compoundsviacatalytic oxidation reactions.

Facile synthesis of 1.3 nm monodispersed Ag nanoclusters in an aqueous solution and their antibacterial activities for E. coli

A facile one-pot strategy was developed to prepare ultrastable monodispersed Ag nanoclusters (NCs) in aqueous solution by using ISOBAM-104, as a stabilizing agent. The as-prepared Ag NCs with an average size of 1.3 nm, which can be preserved in water solution for more than one year under ambient conditions without obvious agglomeration, exhibited excellent antibacterial activities for E. coli (DH5α), compared to most of the previously reported results.

Ag NCs of 1.3 nm prepared by a facile one-pot strategy exhibit excellent antibacterial activities for E. coli.

Chitosan stabilized Ag-Au nanoalloy for colorimetric sensing and 5-Fluorouracil delivery

Fluorescent CS/Ag-Au (chitosan/silver-gold) nanocomposite containing different weight percentage of Ag and Au was synthesized using the chemical reduction method. 5-Fluorouracil (5-FU) encapsulated nanocomposite was also synthesized and its cytotoxicity towards breast cancer cell lines (MCF-7) studied. The XRD pattern of the nanocomposite shows peaks of chitosan, silver and gold. The peaks corresponding to gold and silver indicate the face centered cubic structure of silver and gold nanoparticles. The polymer matrix nanocomposite structure with chitosan as the matrix and silver-gold as the filler phase is evident from the high resolution transmission electron microscopy (HRTEM) images and an increase in particle size from∼5nm to about 12nm is noticeable on encapsulation of 5-Fluorouracil (5-FU). The presence of fluorine in the case of 5-FU encapsulated nanocomposite and the presence of reflections corresponding to 5-FU in the SAED pattern confirms the encapsulation of 5-FU into the nanocomposite, which is also confirmed by elemental mapping. The presence of a single surface plasmon resonance (SPR) peak in the case of the nanocomposite in a position in between the SPR bands of pure silver and gold nanoparticles confirms the formation of Ag-Au alloy and the elemental mapping results obtained for the nanocomposite also supports the UV-vis results. The photoluminescence (PL) spectrum clearly shows an emission peak in the near infrared region (700-900nm), which makes the nanocomposite suitable for use in cellular imaging. The application of the nanocomposite as a colorimetric sensor was also studied and it was found to be useful for the specific detection of mercury (Hg) without much interference and the detection limit was found to be 5.0×10^-8M.

Heterogeneously Catalyzed Hydrothermal Processing of C5-C6 Sugars

Biomass has been long exploited as an anthropogenic energy source; however, the 21st century challenges of energy security and climate change are driving resurgence in its utilization both as a renewable alternative to fossil fuels and as a sustainable carbon feedstock for chemicals production. Deconstruction of cellulose and hemicellulose carbohydrate polymers into their constituent C₅ and C₆ sugars, and subsequent heterogeneously catalyzed transformations, offer the promise of unlocking diverse oxygenates such as furfural, 5-hydroxymethylfurfural, xylitol, sorbitol, mannitol, and gluconic acid as biorefinery platform chemicals. Here, we review recent advances in the design and development of catalysts and processes for C₅-C₆ sugar reforming into chemical intermediates and products, and highlight the challenges of aqueous phase operation and catalyst evaluation, in addition to process considerations such as solvent and reactor selection.

Preparation and Catalytic Activity for Aerobic Glucose Oxidation of Crown Jewel Structured Pt/Au Bimetallic Nanoclusters

Understanding of the “structure-activity” relations for catalysts at an atomic level has been regarded as one of the most important objectives in catalysis studies. Bimetallic nanoclusters (NCs) in its many types, such as core/shell, random alloy, cluster-in-cluster, bi-hemisphere, and crown jewel (one kind of atom locating at the top position of another kind of NC), attract significant attention owing to their excellent optical, electronic, and catalytic properties. PVP-protected crown jewel-structured Pt/Au (CJ-Pt/Au) bimetallic nanoclusters (BNCs) with Au atoms located at active top sites were synthesized via a replacement reaction using 1.4-nm Pt NCs as mother clusters even considering the fact that the replacement reaction between Pt and Au³⁺ ions is difficult to be occurred. The prepared CJ-Pt/Au colloidal catalysts characterized by UV-Vis, TEM, HR-TEM and HAADF-STEM-EELS showed a high catalytic activity for aerobic glucose oxidation, and the top Au atoms decorating the Pt NCs were about 15 times more active than the Au atoms of Au NCs with similar particle size.

Characterizing the optical properties of single palladium-coated core–shell gold nanorods as multifunctional orientation probes

Bimetallic core–shell gold nanorods are promising multifunctional orientation probes due to the synergetic effect of two different metals, as examined under an optical microscope.

Nanoporous Thin Films and Binary Nanoparticle Superlattices Created by Directed Self-Assembly of Block Copolymer Hybrid Materials

The design and development of well-defined, functional nanostructures via self-assembly is one of the key objectives in current nanotechnology. Block copolymer-based hybrid materials are attractive candidates for the fabrication of multifunctional nanostructures, which provide the building blocks for more complex nanoarchitectures and nanodevices. However, one of the major challenges lies in controlling the structure formation in these hybrid materials by guiding the self-assembly of the block copolymer. Here, hierarchical nanoporous structures are fabricated via guided multistep self-assembly of diblock copolymer micellar solutions onto hydrophilic solid substrates. The core of polystyrene-block-poly[4-vinylpyridine] micelles serves as a nanoreactor for the preparation of size-controlled gold nanoparticles. Deposition of thin films of the micellar solution in combination with a nonselective cosolvent (THF), on hydrophilic surfaces leads to the formation of hierarchical nanoporous structures. The micellar films exhibit two different pore diameters and a total pore density of more than 10(10) holes per cm2. Control over the pore diameter is achieved by adapting the molecular weight of the polystyrene-block-poly[4-vinylpyridine] diblock copolymer. Moreover, the porous morphology is used as a template for the fabrication of bimetallic nanostructured thin films. The PS-b-P4VP template is subsequently removed by oxygen plasma etching, leaving behind binary nanoparticle structures that mimic the original thin film morphology.

In situ formation of gold/silver bi-metal nanodots on silica spheres and evaluation of their microbicidal properties

An environmentally benign synthetic method of seedless and one-step growth of 2–4 nm sized gold/silver bi-metal nanodots on preformed silica spheres and their microbicidal properties with different concentrations of Au and Ag are reported.

Synthesis and Catalytic Activity of Pluronic Stabilized Silver-Gold Bimetallic Nanoparticles

In this report, we demonstrate a rapid, simple, and green method for synthesizing silver-gold (Ag-Au) bimetallic nanoparticles (BNPs). We used a novel modification to the galvanic replacement reaction by suspending maltose coated silver nanoparticles (NPs) in ≈ 2% aqueous solution of EO100PO65EO100 (Pluronic F127) prior to HAuCl4 addition. The Pluronic F127 stabilizes the BNPs, imparts biocompatibility, and mitigates the toxicity issues associated with other surfactant stabilizers. BNPs with higher Au:Ag ratios and, subsequently, different morphologies were successfully synthesized by increasing the concentration of gold salt added to the Ag NP seeds. These BNPs have enhanced catalytic activities than typically reported for monometallic Au or Ag NPs (∼ 2-10 fold) of comparable sizes in the sodium borohydride reduction of 4-nitrophenol. The 4-nitrophenol reduction rates were highest for partially hollow BNP morphologies.