PMMA/polysaccharides nanofilm loaded with adenosine deaminase inhibitor for targeted anti-inflammatory drug delivery

Improved Physiochemical Properties of Chitosan@PCL Nerve Conduits by Natural Molecule Crosslinking

Nerve conduits may represent a valuable alternative to autograft for the regeneration of long-gap damages. However, no NCs have currently reached market approval for the regeneration of limiting gap lesions, which still represents the very bottleneck of this technology. In recent years, a strong effort has been made to envision an engineered graft to tackle this issue. In our recent work, we presented a novel design of porous/3D-printed chitosan/poly-ε-caprolactone conduits, coupling freeze drying and additive manufacturing technologies to yield conduits with good structural properties. In this work, we studied genipin crosslinking as strategy to improve the physiochemical properties of our conduit. Genipin is a natural molecule with very low toxicity that has been used to crosslink chitosan porous matrix by binding the primary amino group of chitosan chains. Our characterization evidenced a stabilizing effect of genipin crosslinking towards the chitosan matrix, with reported modified porosity and ameliorated mechanical properties. Given the reported results, this method has the potential to improve the performance of our conduits for the regeneration of long-gap nerve injuries.

Study of Polymer Nanofilms Using for High-Throughput Screening in the Development of Transdermal Therapeutic System

We investigated polymer nanofilm (PNF) for use in high-throughput screening (HTS) to promote the development of transdermal therapeutic systems (TTS). The drug permeability of PNF with a 1 : 1 weight mix ratio of poly(L-lactic acid) (PLLA) and poly(methylhydrosiloxane) (PMHS) (PLLA/PMHS (1/1) PNF) and Strat-M^® of the transdermal diffusion test membrane, was evaluated using 12 kinds of drugs with the logarithmic value of n-octanol/water partition coefficients of -4.70 to 3.86. The lag time of PLLA/PMHS (1/1) PNF made via polymer alloying was significantly shorter than that of Strat-M^® for 10 drug types, and the formation of a highly diffusible PMHS-rich phase accompanying the formation of a sea-island structure was suggested as a contributing factor. Additionally, a high correlation was confirmed between the measured value for the logarithm of the apparent permeability coefficient of PLLA/PMHS (1/1) PNF and the literature values for the logarithm of the apparent permeability coefficient of human skin (r = 0.929). This study shows that PLLA/PMHS (1/1) PNF can reliably predict drug permeability in human skin and can potentially be used in HTS for developing TTS.

Nanoarchitectonics beyond perfect order - not quite perfect but quite useful

Nanoarchitectonics, like architectonics, allows the design and building of structures, but at the nanoscale. Unlike those in architectonics, and even macro-, micro-, and atomic-scale architectonics, the assembled structures at the nanoscale do not always follow the projected design. In fact, they do follow the projected design but only for self-assembly processes producing structures with perfect order. Here, we look at nanoarchitectonics allowing the building of nanostructures without a perfect arrangement of building blocks. Here, fabrication of structures from molecules, polymers, nanoparticles, and nanosheets to polymer brushes, layer-by-layer assembly structures, and hydrogels through self-assembly processes is discussed, where perfect order is not necessarily the aim to be achieved. Both planar substrate and spherical template-based assemblies are discussed, showing the challenging nature of research in this field and the usefulness of such structures for numerous applications, which are also discussed here.

Polysaccharide Layer-by-Layer Coating for Polyimide-Based Neural Interfaces

Implantable flexible neural interfaces (IfNIs) are capable of directly modulating signals of the central and peripheral nervous system by stimulating or recording the action potential. Despite outstanding results in acute experiments on animals and humans, their long-term biocompatibility is hampered by the effects of foreign body reactions that worsen electrical performance and cause tissue damage. We report on the fabrication of a polysaccharide nanostructured thin film as a coating of polyimide (PI)-based IfNIs. The layer-by-layer technique was used to coat the PI surface due to its versatility and ease of manufacturing. Two different LbL deposition techniques were tested and compared: dip coating and spin coating. Morphological and physiochemical characterization showed the presence of a very smooth and nanostructured thin film coating on the PI surface that remarkably enhanced surface hydrophilicity with respect to the bare PI surface for both the deposition techniques. However, spin coating offered more control over the fabrication properties, with the possibility to tune the coating's physiochemical and morphological properties. Overall, the proposed coating strategies allowed the deposition of a biocompatible nanostructured film onto the PI surface and could represent a valid tool to enhance long-term IfNI biocompatibility by improving tissue/electrode integration.

Degradation-Dependent Controlled Delivery of Doxorubicin by Glyoxal Cross-Linked Magnetic and Porous Chitosan Microspheres

Glyoxal cross-linked porous magnetic chitosan microspheres, GMS (∼170 μm size), with a tunable degradation profile were synthesized by a water-in-oil emulsion technique to accomplish controlled delivery of doxorubicin (DOX), a chemotherapeutic drug, to ensure prolonged chemotherapeutic effects. The GMS exhibit superparamagnetism with saturation magnetization, M s = 7.2 emu g-1. The in vitro swelling and degradation results demonstrate that a swelling plateau of GMS is reached at 24 h, while degradation can be modulated to begin at 96-120 h by formulating the cross-linked network using glyoxal. MTT assay, live/dead staining, and F-actin staining (actin/DAPI) validated the cytocompatibility of GMS, which further assured good drug loading capacity (35.8%). The release mechanism has two stages, initiated by diffusion-inspired release of DOX through the swollen polymer network (72 h), which is followed by a disintegration-tuned release profile (>96 h) conferring GMS a potential candidate for DOX delivery.

Polyelectrolyte Multilayer Films Based on Natural Polymers: From Fundamentals to Bio-Applications

Natural polymers are of great interest in the biomedical field due to their intrinsic properties such as biodegradability, biocompatibility, and non-toxicity. Layer-by-layer (LbL) assembly of natural polymers is a versatile, simple, efficient, reproducible, and flexible bottom-up technique for the development of nanostructured materials in a controlled manner. The multiple morphological and structural advantages of LbL compared to traditional coating methods (i.e., precise control over the thickness and compositions at the nanoscale, simplicity, versatility, suitability, and flexibility to coat surfaces with irregular shapes and sizes), make LbL one of the most useful techniques for building up advanced multilayer polymer structures for application in several fields, e.g., biomedicine, energy, and optics. This review article collects the main advances concerning multilayer assembly of natural polymers employing the most used LbL techniques (i.e., dipping, spray, and spin coating) leading to multilayer polymer structures and the influence of several variables (i.e., pH, molar mass, and method of preparation) in this LbL assembly process. Finally, the employment of these multilayer biopolymer films as platforms for tissue engineering, drug delivery, and thermal therapies will be discussed.

Progress and challenges of implantable neural interfaces based on nature-derived materials

Neural interfaces are bioelectronic devices capable of stimulating a population of neurons or nerve fascicles and recording electrical signals in a specific area. Despite their success in restoring sensory-motor functions in people with disabilities, their long-term exploitation is still limited by poor biocompatibility, mechanical mismatch between the device and neural tissue and the risk of a chronic inflammatory response upon implantation.In this context, the use of nature-derived materials can help address these issues. Examples of these materials, such as extracellular matrix proteins, peptides, lipids and polysaccharides, have been employed for decades in biomedical science. Their excellent biocompatibility, biodegradability in the absence of toxic compound release, physiochemical properties that are similar to those of human tissues and reduced immunogenicity make them outstanding candidates to improve neural interface biocompatibility and long-term implantation safety. The objective of this review is to highlight progress and challenges concerning the impact of nature-derived materials on neural interface design. The use of these materials as biocompatible coatings and as building blocks of insulation materials for use in implantable neural interfaces is discussed. Moreover, future perspectives are presented to show the increasingly important uses of these materials for neural interface fabrication and their possible use for other applications in the framework of neural engineering.

Release characteristics of enoxaparin sodium-loaded polymethylmethacrylate bone cement

BACKGROUND

This study aimed to prepare the polymethylmethacrylate (PMMA) bone cement release system with different concentrations of enoxaparin sodium (ES) and to investigate the release characteristics of ES after loading into the PMMA bone cement.

METHODS

In the experimental group, 40 g Palacos®R PMMA bone cement was loaded with various amount of ES 4000, 8000, 12,000, 16,000, 20,000, and 24,000 AXaIU, respectively. The control group was not loaded with ES. Scanning electron microscopy (SEM) was used to observe the surface microstructure of the bone cement in the two groups. In the experiment group, the mold was extracted continuously with pH7.4 Tris-HCL buffer for 10 days. The extract solution was collected every day and the anti-FXa potency was measured. The experiment design and statistical analysis were conducted using a quantitative response parallel line method.

RESULTS

Under the SEM, it was observed that ES was filled in the pores of PMMA bone cement polymer structure and released from the pores after extraction. There was a burst effect of the release. The release amount of ES on the first day was 0.415, 0.858, 1.110, 1.564, 1.952, and 2.513, respectively, from the six groups with various ES loading amount of 4000, 8000, 12,000, 16,000, 20,000, and 24,000 AXaIU, all reaching the peak of release on the first day. The release decreased rapidly on the next day and entered the plateau phase on the fourth day.

CONCLUSION

The prepared ES-PMMA bone cement has high application potential in orthopedic surgery. ES-PMMA bone cement shows good drug release characteristics. The released enoxaparin sodium has a local anti-coagulant effect within 24 h after application, but it will not be released for a long time, which is complementary to postoperative anti-coagulation therapy.

An enhanced charge-driven intranasal delivery of nicardipine attenuates brain injury after intracerebral hemorrhage

Intranasal drug delivery provided an alternative and effective approach for the intervention of an intracerebral hemorrhage (ICH). However, the short retention time at the absorption site and slow drug transport in intranasal gel influence the drug bioavailability and outcome of ICH. Herein, we fabricated a novel intranasal gel with oriented drug migration utilizing a charge-driven strategy to attenuate brain injury after ICH. Nicardipine hydrochloride (NCD) was entrapped in chitosan nanoparticles (CS NPs) and dispersed in an HAMC gel. Subsequently, one side of the gel was coated with a positively charged film. The oriented migration of CS NPs in the HAMC gel was determined, and the drug bioavailability was also enhanced. Furthermore, a blood-induced ICH rat model was established to evaluate the therapeutic effect of CS NPs + HAMC composites. Intranasal administration of the CS NPs + HAMC (+) composite showed a stronger neuroprotective effect in terms of brain edema reduction and neural apoptosis inhibition compared to the CS NPs + HAMC composite. These results suggested that the oriented and rapid drug transport from nose to brain can be achieved using the charge-driven strategy, and this intranasal drug delivery system has the potential to provide a new therapeutic strategy for the treatment of ICH.

Polysaccharide Coating of Gelatin Gels for Controlled BSA Release

Self-assembly of natural polymers constitute a powerful route for the development of functional materials. In particular, layer-by-layer (LBL) assembly constitutes a versatile technique for the nanostructuration of biobased polymers into multilayer films. Gelatin has gained much attention for its abundance, biodegradability, and excellent gel-forming properties. However, gelatin gels melt at low temperature, thus limiting its practical application. With respect to the above considerations, here, we explored the potential application of gelatin gels as a matrix for protein delivery at physiological temperature. A model protein, bovine serum albumin (BSA), was encapsulated within gelatin gels and then coated with a different number of bilayers of alginate and chitosan (10, 25, 50) in order to modify the diffusion barrier. The coated gel samples were analyzed by means of Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) and confocal Raman spectroscopy, and it was found that the multilayer coatings onto polymer film were interpenetrated to some extent within the gelatin. The obtained results inferred that the coating of gelatin gels with polysaccharide multilayer film increased the thermal stability of gelatin gels and modulated the BSA release. Finally, the influence of a number of bilayers onto the drug release mechanism was determined. The Ritger-Peppas model was found to be the most accurate to describe the diffusion mechanism.

Investigation of the blends of chitosan and tragacanth as potential drug carriers for the delivery of ibuprofen in the intestine

This study provides a new potential hydrogel for the intestinal delivery of ibuprofen.

Sugar-sensitive dendrimer films as a sacrificial layer for the preparation of freestanding multilayer films

Multilayer thin films composed of poly(vinyl alcohol) (PVA) and phenylboronic acid-bearing poly(amidoamine) dendrimer (PBA-PAMAM) were used as a sacrificial layer for constructing freestanding polyelectrolyte films consisting of poly(styrenesulfonate) (PSS) and poly(allylamine hydrochloride) (PAH). Freestanding (PSS/PAH)₁₅ films were successfully released from substrate by exposing composite (PVA/PBA-PAMAM)_n/(PSS/PAH)₁₅ films (n=5 and 10) to sorbitol solutions under mild conditions at pH7.0-9.0. The film release was accelerated in solutions of higher sorbitol concentrations at pH9.0 as well as in solutions with lower concentration of NaCl. The results were rationalized based on the scission of boronate ester bonds between PBA-PAMAM and PVA in the (PVA/PBA-PAMAM)_n layer due to a competitive binding of sorbitol to PBA-PAMAM.

Near-Infrared Light-Stimulus-Responsive Film as a Sacrificial Layer for the Preparation of Free-Standing Films

It remains a challenge to fabricate sacrificial films that are stable in most of solvents and can be readily decomposed on demand. Here we report the fabrication of a near-infrared (NIR) light decomposable sacrificial film by layer-by-layer (LbL) assembly of UV-light-decomposable poly((4-(2-bromoethoxy)-5-methoxy-2-nitrobenzyl acrylate) triethylammonium bromide) (PNBA-TEA), poly(sodium 4-styrene-sulfonate) (PSS), branched polyethyleimine (bPEI), and lanthanide-doped upconversion nanoparticles (UCNPs). The [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films are stable in deposition solutions of various materials and decompose upon NIR light irradiation. In the [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films, UCNPs can convert NIR light into UV light, which can decompose PNBA-TEA. After immersing the NIR light-irradiated [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films in 0.1 M aqueous NaHCO3 solution, the disintegration of the entire films occurs because of the repulsive force between the negatively charged photoproduct of PNBA-TEA and PSS. LbL-assembled (PAH/PAA)*50 films deposited on top of the NIR-light-decomposable [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films can be conveniently released to produce large-area and defect-free (PAH/PAA)*50 free-standing films after NIR light irradiation and subsequent immersion in 0.1 M aqueous NaHCO3 solution. Because of the satisfactory stability and on-demand decomposable property, the [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films are promising as sacrificial layers for the fabrication of various free-standing films.

Nanostructured ultra-thin patches for ultrasound-modulated delivery of anti-restenotic drug

This work aims to demonstrate the possibility to fabricate ultra-thin polymeric films loaded with an anti-restenotic drug and capable of tunable drug release kinetics for the local treatment of restenosis. Vascular nanopatches are composed of a poly(lactic acid) supporting membrane (thickness: ~250 nm) on which 20 polyelectrolyte bilayers (overall thickness: ~70 nm) are alternatively deposited. The anti-restenotic drug is embedded in the middle of the polyelectrolyte structure, and released by diffusion mechanisms. Nanofilm fabrication procedure and detailed morphological characterization are reported here. Barium titanate nanoparticles (showing piezoelectric properties) are included in the polymeric support and their role is investigated in terms of influence on nanofilm morphology, drug release kinetics, and cell response. Results show an efficient drug release from the polyelectrolyte structure in phosphate-buffered saline, and a clear antiproliferative effect on human smooth muscle cells, which are responsible for restenosis. In addition, preliminary evidences of ultrasound-mediated modulation of drug release kinetics are reported, thus evaluating the influence of barium titanate nanoparticles on the release mechanism. Such data were integrated with quantitative piezoelectric and thermal measurements. These results open new avenues for a fine control of local therapies based on smart responsive materials.

Multilayered thin films from poly(amido amine)s and DNA

Dip-coated multilayered thin films of poly(amido amine)s (PAAs) and DNA have been developed to provide surfaces with cell-transfecting capabilities. Three types of PAAs, differing in side chain functional groups, were synthesized and characterized for their properties in forming multilayered structures with ultrasonicated calf thymus DNA (CTDNA) as model DNA. All three polymers display a multilayer build-up in linear profiles as demonstrated by UV spectroscopy. More highly charged side chains were found to provide the lowest deposition of DNA. Surface profiles of the obtained films were investigated by atomic force microscopy (AFM) and static water contact angle measurements to reveal complete surface coverage after at least four layer pair depositions, where alternating patterns of surface profiles were observed depending on whether the cationic polymer or the anionic DNA layer was on top. The stability of the formed surfaces was investigated in vitro under physiological and reductive conditions. Owing to the presence of disulfide bonds in the PAA main chain, the films were readily degraded in the presence of 1mM of DTT in vitro. Under non-reductive physiological conditions, two of the thicker films underwent thermodynamic rearrangement, which resulted in release of approximately half of the incorporated material within 1h, which was caused by the physiological salt concentration. Further, this unpacking phenomenon proved useful in transfecting COS-7 cells seeded on top of these multilayers containing functional plasmid DNA encoding for green fluorescence protein (GFP). Two out of the three different multilayers facilitated good COS-7 cell attachment, proliferation, and transfection in vitro within 2d ays of culture. Fluorescence staining further revealed the presence of DNA-containing released film material among cultured cells. The present work demonstrates the possibility of coating surfaces with thin films that are conveniently adjustable in thickness and amount of active agent to provide cell-transfecting functionality. In this manner transfection can be achieved by simply culturing cells on a multilayer-coated surface in their optimal culture condition (in the presence of serum) and without the need of removing the transfection agent to avoid cytotoxicity.

Adenosine-associated delivery systems

Adenosine is a naturally occurring purine nucleoside in every cell. Many critical treatments such as modulating irregular heartbeat (arrhythmias), regulation of central nervous system (CNS) activity and inhibiting seizural episodes can be carried out using adenosine. Despite the significant potential therapeutic impact of adenosine and its derivatives, the severe side effects caused by their systemic administration have significantly limited their clinical use. In addition, due to adenosine's extremely short half-life in human blood (<10 s), there is an unmet need for sustained delivery systems to enhance efficacy and reduce side effects. In this article, various adenosine delivery techniques, including encapsulation into biodegradable polymers, cell-based delivery, implantable biomaterials and mechanical-based delivery systems, are critically reviewed and the existing challenges are highlighted.

Kinetic models for the release of the anticancer drug doxorubicin from biodegradable polylactide/metal oxide-based hybrids

For decades, studies on drug-release kinetics have been an important topic in the field of drug delivery because they provide important insights into the mechanism of drug release from carriers. In this work, polylactide (PLA), doxorubicin (DOX), and metal oxide (MO) (titanium dioxide, magnetic iron oxide, and zinc oxide) spheres were synthesised using the solvent-evaporation technique and were tested for sustained drug release. The efficacy of a dosage system is determined by its ability to deliver the drug at a sustained rate, afford an increased plasma half-life, a minimum exposure of toxic drugs to healthy cells and a high drug pay load. Mathematical models were used to elucidate the release mechanism of the drug from the spheres. The release fitted a zero-order model with a correlation coefficient in the range of 0.9878-0.9891 and the release mechanism followed an anomalous release, meaning drug release was afforded through both diffusion and the dissolution of PLA. Therefore, PLA/DOX/MO released the same amount of drug per unit time. Consequently, the potential for PLA use as a carrier was ascertained.

Sugar-mediated disassembly of mucin/lectin multilayers and their use as pH-Tolerant, on-demand sacrificial layers

The layer-by-layer (LbL) assembly of thin films on surfaces has proven to be an extremely useful technology for uses ranging from optics to biomedical applications. Releasing these films from the substrate to generate so-called free-standing multilayer films opens a new set of applications. Current approaches to generating such materials are limited because they can be cytotoxic, difficult to scale up, or have undesirable side reactions on the material. In this work, a new sacrificial thin film system capable of chemically triggered dissolution at physiological pH of 7.4 is described. The film was created through LbL assembly of bovine submaxillary mucin (BSM) and the lectin jacalin (JAC) for a (BSM/JAC) multilayer system, which remains stable over a wide pH range (pH 3-9) and at high ionic strength (up to 5 M NaCl). This stability allows for subsequent LbL assembly of additional films in a variety of conditions, which could be released from the substrate by incubation in the presence of a competitive inhibitor sugar, melibiose, which selectively disassembles the (BSM/JAC) section of the film. This novel multilayer system was then applied to generate free-standing, 7 μm diameter, circular ultrathin films, which can be attached to a cell surface as a "backpack". A critical thickness of about 100 nm for the (BSM/JAC) film was required to release the backpacks from the glass substrate, after incubation in melibiose solution at 37 °C for 1 h. Upon their release, backpacks were subsequently attached to murine monocytes without cytotoxicity, thereby demonstrating the compatibility of this mucin-based release system with living cells.

Gold nanoshell/polysaccharide nanofilm for controlled laser-assisted tissue thermal ablation

We report on the fabrication and characterization of a freestanding ultrathin, mucoadhesive gold nanoshell/polysaccharide multilayer nanocomposite (thermonanofilm, TNF), that can be used for controlled photothermal ablation of tissues through irradiation with near-infrared radiation (NIR) laser. The aim of this work is to provide a new strategy to precisely control particle concentration during photothermalization of cancerous lesions, since unpredictable and aspecific biodistributions still remains the central issue of inorganic nanoparticle-assisted photothermal ablation. Gold nanoshell encapsulation in polysaccharide matrix is achieved by drop casting deposition method combined with spin-assisted layer-by-layer (LbL) assembly. Submicrometric thickness of films ensures tissue adhesion. Basic laser-induced heating functionality has been demonstrated by in vitro TNF-mediated thermal ablation of human neuroblastoma cancer cells, evidenced by irreversible damage to cell membranes and nuclei. Ex vivo localized vaporization and carbonization of animal muscular tissue is also demonstrated by applying TNF onto tissue surface. Thermal distribution in the tissue reaches a steady state in a few seconds, with significant increases in temperature (ΔT > 50) occurring across an 1 mm span, ensuring control of local photothermalization and providing more safety and predictability with respect to traditional laser surgery. A steady-state model of tissue thermalization mediated by TNFs is also introduced, predicting the temperature distribution being known the absorbance of TNFs, the laser power, and the tissue thermal conductivity, thus providing useful guidelines in the development of TNFs. Thermonanofilms can find applications for local photothermal treatment of cancerous lesions and wherever high precision and control of heat treatment is required.