Physicochemical characteristics and droplet impact dynamics of superhydrophobic carbon nanotube arrays

Coalescence and Rebound Dynamics in Two Droplets Train Impacting on a Heterogeneous Wettability Surface

Droplets that can be steered and rebound off surfaces are fundamentally interesting and important due to their promising potential in numerous applications, such as anti-icing and -fogging, spray coating, and self-cleaning. Heterogeneous wettability surfaces have been shown to be an effective means of droplet manipulation. This paper combines numerical simulation with theoretical analysis to investigate the dynamics of two droplets training impacting on and bouncing off a heterogeneous surface (superhydrophobic substrate decorated with a hydrophilic strip). First, the time evolutions of the droplet morphology and velocity vectors are examined to explore the particular dynamic behaviors. At different ratios of the impact velocity, three distinct rebound patterns are observed, and a regime diagram is established. After that, the effects of the impact conditions and surface wettability on the rebound performance of the coalesced droplet are studied systematically. Special attention is paid to the variations of the rebound height and the lateral transportation distance with the Weber number of two droplets and the distance between the impacting point and the hydrophilic stripe. Moreover, a theoretical analysis of two droplets' impact is performed based on the energy conservation. The obtained scaling laws match well with the numerical data in the trend. Our research may strengthen the understanding of the interactions between droplets, which is valuable for the manipulation of multiple droplets in related fields.

Understanding and Utilizing Droplet Impact on Superhydrophobic Surfaces: Phenomena, Mechanisms, Regulations, Applications, and Beyond

Droplet impact is a ubiquitous liquid behavior that closely tied to human life and production, making indispensable impacts on the big world. Nature-inspired superhydrophobic surfaces provide a powerful platform for regulating droplet impact dynamics. The collision between classic phenomena of droplet impact and the advanced manufacture of superhydrophobic surfaces is lighting up the future. Accurately understanding, predicting, and tailoring droplet dynamic behaviors on superhydrophobic surfaces are progressive steps to integrate the droplet impact into versatile applications and further improve the efficiency. In this review, the progress on phenomena, mechanisms, regulations, and applications of droplet impact on superhydrophobic surfaces, bridging the gap between droplet impact, superhydrophobic surfaces, and engineering applications are comprehensively summarized. It is highlighted that droplet contact and rebound are two focal points, and their fundamentals and dynamic regulations on elaborately designed superhydrophobic surfaces are discussed in detail. For the first time, diverse applications are classified into four categories according to the requirements for droplet contact and rebound. The remaining challenges are also pointed out and future directions to trigger subsequent research on droplet impact from both scientific and applied perspectives are outlined. The review is expected to provide a general framework for understanding and utilizing droplet impact.

Design of Superhydrophobic Shape Memory Composites with Kirigami Structures and Uniform Wetting Property

With the continuous increase in human demand to improve aircraft performance, intelligent aircraft technologies have become a popular research field in recent years. Among them, the deformable skin structure has become one of the key technologies to achieve excellent and reliable performance. However, during the service, deformable skin structures may encounter problems such as surface impact and adhesion of droplets in rainy weather or surface icing in low-temperature environments, which can seriously affect the flight safety of the aircraft. One way to overcome these issues is to use superhydrophobic shape memory materials in the structure. In this regard, first, shape memory composites were prepared with shape memory epoxy resin as the matrix and carbon fiber orthogonal woven fabric as the reinforcement material. Superhydrophobic shape memory composites (SSMCs) were then obtained by casting the kirigami composite with superhydrophobic carbon nanotube-polydimethylsiloxane (CNT@PDMS) mixture, and the surface was processed by laser micromachining. Shape memory performance and surface wetting performance were determined by material testing methods. The results showed that the shape memory recovery rate can reach 85.11%, the surface is superhydrophobic, the average water contact angle is 156.9 ± 4.4°, and the average rolling angle is 3 ± 0.5°. The three-point bending test of the specimens with different kirigami cell configurations showed that the shape memory composite based on the rectangular structure has the best deformability with an aspect ratio of 0.4. From the droplet impact test, it was found that the impact speed of water droplets and the curvature of the surface can greatly affect the dynamic performance of water. This work is expected to be of significant research value and importance for developing functional deformable skin materials.

Droplet impacting dynamics: Recent progress and future aspects

Droplet impact behaviours are widely applied in a variety of domains including self-cleaning, painting and coating, corrosion of turbine blades and aircraft, separation and oil repellency, anti-icing, heat transfer and droplet electricity generation, etc. The wetting behaviours and impact dynamics of droplets on solid and liquid surfaces involve complex solid-liquid and liquid-liquid interfacial interactions. The modulation of droplet dynamics by means of specific surface morphology and hydrophobic/hydrophilic patterns, which in turn can be derived to related applications, is one of the current promising interests in the interfacial effect modulating droplet dynamics. This review provides a detailed overview of several scientific aspects of droplet impact behaviours and heat transfer processes influenced by multiple factors. Firstly, the essential wetting theory and the fundamental parameters of impinging droplets are introduced. Secondly, the effects of different parameters on the dynamic behaviours and heat transfer of impinging droplet are discussed. Finally, the potential applications are listed. Existing concerns and challenges are summarized and future perspectives are provided to address poorly understood and conflicting issues.

Dynamics Behavior of Droplet Impact on a Controllable Curved Micropillar Array Surface Induced by a Magnetic Field

Many fields would greatly benefit from the realization of the manipulation of droplet impact behavior by an asymmetric surface structure, such as self-cleaning, anti-icing, inkjet printing, etc. However, research on the prediction of the impact of the dynamics of small-volume droplets on the asymmetric superhydrophobic surface has been insufficient. In this study, a superhydrophobic curved micropillar array surface with controllable bending angles induced by a magnetic field was prepared. The impact and rebound behaviors of the nanoliter droplets with diameters of 100-300 μm were investigated. The experimental results showed the positive correlation between the threshold Weber number of the impact morphology transition of the droplet and the inclination angle of the micropillar. In addition, the restitution coefficient, which measures the degree of energy loss during the impact process, showed a nonmonotonic dependence on the Weber number. A critical velocity model of the impact morphology transition of the droplet on the curved micropillar array surface and a prediction model of the restitution coefficient of the droplet in different impact morphologies are suggested. Our findings will help in the design of a functional surface for manipulating the impact behavior of the droplet.

Energy Loss for Droplets Bouncing Off Superhydrophobic Surfaces

A water droplet can bounce off superhydrophobic surfaces multiple times before coming to a stop. The energy loss for such droplet rebounds can be quantified by the ratio of the rebound speed U_R and the initial impact speed U_I; i.e., its restitution coefficient e = U_R/U_I. Despite much work in this area, a mechanistic explanation for the energy loss for rebounding droplets is still lacking. Here, we measured e for submillimeter- and millimeter-sized droplets impacting two different superhydrophobic surfaces over a wide range of U_I (4-700 cm s^-1). We proposed simple scaling laws to explain the observed nonmonotonic dependence of e on U_I. In the limit of low U_I, energy loss is dominated by contact-line pinning and e is sensitive to the surface wetting properties, in particular to contact angle hysteresis Δ cos θ of the surface. In contrast, e is dominated by inertial-capillary effects and does not depend on Δ cos θ in the limit of high U_I.

Oblique Impacts of Nanodroplets upon Surfaces

In this work, oblique impacts of nanodroplets impacting surfaces in a wide range of impact angles (α) are investigated in detail via molecular dynamics simulations. Five outcomes are observed, including deposition, prompt splashing, break-up, separation, and shattering. With increasing impact angle, the outcomes of prompt splashing, break-up, separation, and shattering are enlarged but the one of deposition is compressed. By drawing a We_n ∼ α phase diagram, the outcome regimes and corresponding boundaries of them can be successfully identified, and the boundary between the deposition and other outcome regimes is theoretically modeled and shows good agreement with the phase diagram, where We_n is the normal impact Weber number. For further understanding of the oblique impacts, the maximum spreading factor, as the feature parameter of spreading, is investigated. Asymmetry spreading behaviors are observed, noting that β_max,∥ is always larger than β_max,⊥. β_max,⊥ is tested that it only depends on We_n with wide impact angles and could be predicted by the scaling law of β_max,⊥ = 0.7We_n^1/4. However, β_max,∥ depends on not only We_n but also impact angles. A modified model is proposed for predicting β_max,∥ as 0.7We_n^1/4 + 0.001(We_n tan² α)^3/2, which shows good agreement with data on surfaces with θ from 73 to 105° in wide We_n and α ranges.

Droplet-Impact Driven Formation of Ultralow Volume Liquid Marbles with Enhanced Mechanical Stability and Sensing Ability

Liquid marbles (LMs), droplets encapsulated with micro/nanoparticles, have attracted significant attention owing to their potential applications in various fields, ranging from microbioreactors to sensors. The volume of the LMs is a key parameter determining their mechanical stability and gas sensing ability. It is ideal to work with small volumes because of their better mechanical stability and gas sensing power compared to the larger LMs. Though many methods exist for producing LMs in the volume range above 2 μL, no reliable method exists to prepare fully coated submicroliter LMs with tunable volume. The situation becomes even more difficult when one attempts to produce tiny Janus Liquid Marbles (JLMs). This paper presents a simple, single-step, and efficient strategy for obtaining both the pristine LMs and JLMs in the volume range 200 nL to 18 μL. The core idea relies on the impact of a liquid drop on a particle bed at a Weber number of ∼55 to produce two daughter droplets and to convert these droplets into LMs/JLMs. The whole process takes only a few tens of milliseconds (∼50 ms). We have rendered the experimental schemes so that both the JLMs and pristine LMs can be produced in a single step, with control over their volume. The mechanical stability analysis of the prepared marbles indicates that 200 nL is 5 times more stable than 10 μL of LMs. The 0.72 μL LMs prepared with a 0.5 v/v % phenolphthalein indicator solution showed 3 times faster response time to ammonia gas sensing than 10 μL of LMs. The results presented in this work open up a new route for the rapid and reliable production of both multilayered LMs and JLMs with tunable volume in a wide range (200 nL to 18 μL).

Nanoarray-Embedded Hierarchical Surfaces for Highly Durable Dropwise Condensation

Durable dropwise condensation of saturated vapor is of significance for heat transfer and energy saving in extensive industrial applications. While numerous superhydrophobic surfaces can promote steam condensation, maintaining discrete microdroplets on surfaces without the formation of a flooded filmwise condensation at high subcooling remains challenging. Here, we report the development of carbon nanotube array-embedded hierarchical composite surfaces that enable ultra-durable dropwise condensation under a wide range of subcooling (ΔT_sub = 8 K–38 K), which outperforms existing nanowire surfaces. This performance stems from the combined strategies of the hydrophobic nanostructures that allow efficient surface renewal and the patterned hydrophilic micro frames that protect the nanostructures and also accelerate droplet nucleation. The synergistic effects of the composite design ensure sustained Cassie wetting mode and capillarity-governed droplet mobility (Bond number < 0.055) as well as the large specific volume of condensed droplets, which contributes to the enhanced condensation heat transfer. Our design provides a feasible alternative for efficiently transferring heat in a vapor environment with relatively high temperatures through the tunable multiscale morphology.

Robust Super-Amphiphobic Titanium Surface for Liquid/Liquid Mini Separations

Super-amphiphobic surface with low robustness is not suitable for practical application due to its weak mechanical strength. In this work, an in-site growth of micro-/nanoscale flower-like TiO2 on the surface of a titanium mesh was successfully fabricated through hydrothermal synthesis, followed by chemical modification with low-surface-energy heptadecafluoro-1,1,2,2-tetrahydrodecyl trichlorosilane. The resultant super-amphiphobic coating was highly repellent to all of the ethanol–water mixtures with surface tensions ranging over 26.0–72.8 mN/m, as well as excellent chemical and mechanical durability. After it was irradiated for 8 h with ultraviolet light, it was used for oil/water and oil/oil mini-separation with the help of its Janus characteristic. This was attributed to its unidirectional penetration for liquid droplets with different surface tension values. This kind of smart super-amphiphobic mesh with photochemical activity could potentially gate and sort liquids via surface tensions.

How an Oxide Layer Influences the Impact Dynamics of Galinstan Droplets on a Superhydrophobic Surface

When exposed to air, gallium-based alloys rapidly form a thin oxide layer with viscoelasticity and high adhesion. Although previous work demonstrated that an oxide layer inhibits liquid metal droplet rebound, there is still a lack of a quantitative study to elaborate how an oxide layer affects the impact dynamics. To address this issue, we experimentally investigate Galinstan droplet impingement on a superhydrophobic CuO nanoblade surface and physically explain the difference in the dynamic characteristics of oxidized and unoxidized droplets. Experimental results show that the effect of an oxide layer becomes prominent during the retraction phase. The high adhesion significantly suppresses retraction and rebound, while the elastic response prevents a droplet from sufficiently stretching and maintains the stability of the morphology. More importantly, we systematically and quantitatively explore the influence of an oxide layer on several critical impact parameters, which contributes to a comprehensive understanding of the impact dynamics of liquid metal droplets. It is indicated that an oxide layer has little effect on the maximum spreading factor and spreading time, whereas it causes a 45% reduction of the restitution coefficient and a 36% increase in contact time. Notably, the scaling laws that describe the critical impact parameters of unoxidized droplets show good agreement with the ones known from ordinary Newtonian fluids.

Improving superamphiphobicity by mimicking tree-branch topography

when a droplet impacts on a superhydrophobic structured surface below a certain impact velocity, the droplet can bounce off completely from the surface. However, above such velocity a fraction of the droplet will pin on the surface. Surfaces capable of repelling water droplets are ubiquitous in nature or have been artificially fabricated. However, as the surface tension of the liquid is reduced, the capability of the surface to remain non-wetting gets hindered. Despite progress in previous research, the understanding and development of superamphiphobic surface to impacting low surface tension droplets remains elusive. It is proposed that multi-layer re-entrant like roughness can further enhance the anti-wetting properties also for low surface tension fluids. In this work, we produce patterned conical micro-structures with lateral nano-sized roughness. Furthermore, the droplet impact experiments are conducted on various surfaces with variable surface tensions (27 mN/m - 72 mN/m) by using droplets with different Weber numbers (2-170). We show that conical microstructures with lateral roughness mimicking tree-branches provides a surface topology capable of absorbing the force exerted by the droplet during the impact which prevents the droplet from pinning on the surface at higher impact velocity even for low surface tension droplets. Our study has significance for understanding the liquid interaction mechanism with the surface during the impact process and for the associated surface design considerations.

Influence of Microstructure Topography on the Oblique Impact Dynamics of Drops on Superhydrophobic Surfaces

This report investigates the influence of microstructure topography on the restitution coefficient, maximum spreading diameter, and contact time of oblique drop impacts on superhydrophobic surfaces. The five surfaces tested allow for comparison of open- versus closed-cell structures, feature size and spacing, and hierarchical versus nanoscale-only surface structures. By decoupling the restitution coefficient into a normal (ε_n) and tangential component (ε_t), it is demonstrated that both ε_n and ε_t are largely independent of the microstructure topography. Instead, the restitution coefficient is governed almost exclusively by the normal Weber number. Next, a new model is presented that relates the maximum spreading diameter to an adhesion coefficient that characterizes the overall adhesive properties of the superhydrophobic microstructure during drop rebounding. Through this analysis, we discovered that surface geometries with greater microstructure roughness (i.e., overall surface area) promote a higher maximum spreading diameter than flatter geometries. Furthermore, the contact time of drop impacts on flat surfaces is positively correlated with the impact velocity due to penetration of the liquid into the porous nanostructure. However, this trend reverses for oblique impacts due to the presence of stretched rebounding behavior. Finally, substrates patterned with sparse pillar microstructures can exhibit pancake bouncing behavior, resulting in extremely low contact times. This unique bouncing mechanism also significantly influences the restitution coefficient and spreading diameter of oblique impacts.

Tailoring of Thermo-Mechanical Properties of Hybrid Composite-Metal Bonded Joints

Metallic substrates and polymer adhesive in composite-metal joints have a relatively large coefficient of thermal expansion (CTE) mismatch, which is a barrier in the growing market of electric vehicles and their battery structures. It is reported that adding carbon nanotubes (CNTs) to the adhesive reduces the CTE of the CNT-enhanced polymer adhesive multi-material system, and therefore when used in adhesively bonded joints it would, theoretically, result in low CTE mismatch in the joint system. The current article presents the influence of two specific mass ratios of CNTs on the CTE of the enhanced polymer. It was observed that the addition of 1.0 wt% and 2.68 wt% of multi-walled CNTs (MWCNTs) decreased the CTE of the polymer adhesive from 7.5×10-5 °C-1 (pristine level) to 5.87×10-5 °C-1 and 4.43×10-5 °C-1, respectively, by 22% and 41% reductions.

New insights into unusual droplets: from mediating the wettability to manipulating the locomotion modes

The ability to manipulate droplets can be utilized to develop various smart sensors or actuators, endowing them with fascinating applications for drug delivery, detection of target analytes, environmental monitoring, intelligent control, and so on. However, the stimuli-responsive superhydrophobic/superhydrophilic materials for normal water droplets cannot satisfy the requirements from some certain circumstances, i.e., liquid lenses and biosensors (detection of various additives in water/blood droplets). Stimuli-responsive wetting/dewetting behaviors of exceptional droplets are open issues and are attracting much attention from across the world. In this perspective article, the unconventional droplets are divided into three categories: ionic or surfactant additives in water droplets, oil droplets, and bubble droplets. We first introduce several classical wettability models of droplets and some methods to achieve wettability transition. The unusual droplet motion is also introduced in detail. There are four main types of locomotion modes, which are vertical rebound motion, lateral motion, self-propulsion motion, and anisotropic wettability controlled sliding behavior. The driving mechanism for the droplet motion is briefly introduced as well. Some approaches to achieve this manipulation goal, such as light irradiation, electronic, magnetic, acid-base, thermal, and mechanical ways will be taken into consideration. Finally, the current researches on unconventional droplets extending to polymer droplets and liquid metal droplets on the surface of special wettability materials are summarized and the prospect of unconventional droplet research directions in the field of on-demand transport application will be proposed.

Film levitation and central jet of droplet impact on nanotube surface at superheated conditions

Influences of surface nanotubes at high temperatures are investigated on droplet impact dynamics and Leidenfrost effect. Five distinct regimes of impact droplets are found on the nanotube surface, including contact boiling, film levitation, central jet levitation, central jet, and Leidenfrost phenomenon. The regimes of film levitation, central jet levitation, and central jet are characterized by either film levitation and/or liquid central jet. The regime of Leidenfrost phenomenon is characterized by droplet bounce-off behavior free of any liquid jets. Film levitation is driven by the vaporization of two parts of the droplet, with one as the droplet bottom layer over the contact area above the nanotube structure, and the other as the hemiwicking liquid in nanotubes. Both the vaporization is impaired by increasing the surface temperature, which is attributed to the reduced contact time and less extent of spread of the droplet at a higher surface temperature. The central jet phenomenon is driven by the vapor stream produced by hemiwicking liquid in the central area upon impact. It is enhanced and then suppressed by elevating the surface temperature, resulting from the collective effects of the vapor pressure in nanotubes which increases with the surface temperature, and the cross-sectional area of the vapor stream, which increases and then decreases with the surface temperature. At a high Weber number, the Leidenfrost temperature can be increased by 125^{∘}C on the nanotube surface, implying a great potential in heat transfer enhancement for droplet-based applications.

Anisotropic behaviours of droplets impacting on dielectrowetting substrates

The spreading of a sessile droplet on a solid substrate is enhanced if a non-uniform electric field is applied at the contact-line region. This so-called dielectrowetting effect holds great potential in controlling the spreading of droplets by varying the strength of the electric field. In this paper, we experimentally and theoretically study the effect of the dielectrowetting on the dynamics of droplets impacting on a solid surface having electrodes to impose the non-uniform electric field to the liquid. We experimentally study the anisotropic behaviours in both the spreading and retracting stages: the droplets spread more but retract with significantly smaller rates in the direction parallel to the electrodes. We provide a theoretical explanation for the spreading enhancement caused by dielectrowetting by decoupling it from inertia-induced spreading. We also theoretically account for the reduction in retraction rate using force balance at the contact line. The theoretical analysis in both the spreading and retracting stages is verified experimentally.

On the Oblique Impact Dynamics of Drops on Superhydrophobic Surfaces. Part II: Restitution Coefficient and Contact Time

We tested oblique drop impacts on a superhydrophobic surface at normal Weber numbers ( We_n) in the range of 3-45, and at varying angles of incidence (AOIs), ranging from 0° (normal impact) to 60° (highly oblique). Our objective is to define the influence of the AOI on the restitution coefficient and on the contact time of rebounding droplets. To interpret the overall restitution coefficient of oblique drop rebounds (ε), we decoupled it into two separate components: a normal (ε_n) and a tangential restitution coefficient (ε_t). We discovered that, regardless of the impact angle, ε_n can be accurately predicted as a function of the normal Weber number (ε_n = 0.94 We_n^-1/4). We support this finding with a mathematical derivation from theory, indicating a general scaling relationship of ε_n ∼ We_n^-1/4 for the normal restitution coefficient. Likewise, the tangential restitution coefficient (ε_t) can also be predicted as a function of We_n (ε_t = 1.20 We_n^-0.12) but is much larger than ε_n. As a result, the overall restitution coefficient (ε) increases for more oblique impacts because most of the tangential velocity is preserved. Furthermore, using the observed correlations for ε_n and ε_t, we derived a model to predict the overall restitution coefficient of rebounding drops at any We_n and AOI. The model's predictions are highly accurate, lying close to our experimental observations in all cases. Regarding the contact time ( t_c), we found that for normal impacts, t_c increased slightly as We_n was raised. We associate this behavior with partial penetration of the liquid into the surface's pores, which results in greater solid-liquid adhesion, prolonging detachment. For highly oblique impacts (AOI = 60°), we observed the reverse trend: the drop's contact time decreases for higher- We_n impacts. We attribute this correlation to stretched rebounding behavior, which accelerates the rebounding of highly oblique impacts.

Wettability of monolayer graphene/single-walled carbon nanotube hybrid films

This work presents a method for fabricating monolayer graphene/single-walled carbon nanotube hybrid films. We found that the wettability of monolayer graphene has a half-transparent behaviour.

Time Evolution of the Wettability of Supported Graphene under Ambient Air Exposure

The wettability of graphene is both fundamental and crucial for interfacing in most applications, but a detailed understanding of its time evolution remains elusive. Here we systematically investigate the wettability of metal-supported, chemical vapor deposited graphene films as a function of ambient air exposure time using water and various other test liquids with widely different surface tensions. The wettability of graphene is not constant, but varies with substrate interactions and air exposure time. The substrate interactions affect the initial graphene wettability, where, for instance, water contact angles of ∼85 and ∼61° were measured for Ni and Cu supported graphene, respectively, after just minutes of air exposure. Analysis of the surface free energy components indicates that the substrate interactions strongly influence the Lewis acid-base component of supported graphene, which is considerably weaker for Ni supported graphene than for Cu supported graphene, suggesting that the classical van der Waals interaction theory alone is insufficient to describe the wettability of graphene. For prolonged air exposure, the effect of physisorption of airborne contaminants becomes increasingly dominant, resulting in an increase of water contact angle that follows a universal linear-logarithmic relationship with exposure time, until saturating at a maximum value of 92-98°. The adsorbed contaminants render all supported graphene samples increasingly nonpolar, although their total surface free energy decreases only by 10-16% to about 37-41 mJ/m2. Our finding shows that failure to account for the air exposure time may lead to widely different wettability values and contradicting arguments about the wetting transparency of graphene.

Controllable wetting state high adhesion hydrophobic surface

High adhesion hydrophobic surfaces with high apparent contact angles were achieved by a convenient approach.

Fabrication of superhydrophobic copper surface on various substrates for roll-off, self-cleaning, and water/oil separation

Superhydrophobic surfaces prevent percolation of water droplets and thus render roll-off, self-cleaning, corrosion protection, etc., which find day-to-day and industrial applications. In this work, we developed a facile, cost-effective, and free-standing method for direct fabrication of copper nanoparticles to engender superhydrophobicity for various flat and irregular surfaces such as glass, transparency sheet (plastic), cotton wool, textile, and silicon substrates. The fabrication of as-prepared superhydrophobic surfaces was accomplished using a simple chemical reduction of copper acetate by hydrazine hydrate at room temperature. The surface morphological studies demonstrate that the as-prepared surfaces are rough and display superhydrophobic character on wetting due to generation of air pockets (The Cassie-Baxter state). Because of the low adhesion of water droplets on the as-prepared surfaces, the surfaces exhibited not only high water contact angle (164 ± 2°, 5 μL droplets) but also superb roll-off and self-cleaning properties. Superhydrophobic copper nanoparticle coated glass surface uniquely withstands water (10 min), mild alkali (5 min in saturated aqueous NaHCO3 of pH ≈ 9), acids (10 s in dilute HNO3, H2SO4 of pH ≈ 5) and thiol (10 s in neat 1-octanethiol) at room temperature (25-35 °C). Again as-prepared surface (cotton wool) was also found to be very effective for water-kerosene separation due to its superhydrophobic and oleophilic character. Additionally, the superhydrophobic copper nanoparticle (deposited on glass surface) was found to exhibit antibacterial activity against both Gram-negative and Gram-positive bacteria.