Adsorption and conformational change of myoglobin on biomimetic hydroxyapatite nanocrystals functionalized with alendronate

Functionalization of biomimetic mineralized collagen for bone tissue engineering

Mineralized collagen (MC) is the basic unit of bone structure and function and is the main component of the extracellular matrix (ECM) in bone tissue. In the biomimetic method, MC with different nanostructures of neo-bone have been constructed. Among these, extra-fibrous MC has been approved by regulatory agencies and applied in clinical practice to play an active role in bone defect repair. However, in the complex microenvironment of bone defects, such as in blood supply disorders and infections, MC is unable to effectively perform its pro-osteogenic activities and needs to be functionalized to include osteogenesis and the enhancement of angiogenesis, anti-infection, and immunomodulation. This article aimed to discuss the preparation and biological performance of MC with different nanostructures in detail, and summarize its functionalization strategy. Then we describe the recent advances in the osteo-inductive properties and multifunctional coordination of MC. Finally, the latest research progress of functionalized biomimetic MC, along with the development challenges and future trends, are discussed. This paper provides a theoretical basis and advanced design philosophy for bone tissue engineering in different bone microenvironments.

Multifunctional Scaffolds Based on Emulsion and Coaxial Electrospinning Incorporation of Hydroxyapatite for Bone Tissue Regeneration

Tissue engineering is nowadays a powerful tool to restore damaged tissues and recover their normal functionality. Advantages over other current methods are well established, although a continuous evolution is still necessary to improve the final performance and the range of applications. Trends are nowadays focused on the development of multifunctional scaffolds with hierarchical structures and the capability to render a sustained delivery of bioactive molecules under an appropriate stimulus. Nanocomposites incorporating hydroxyapatite nanoparticles (HAp NPs) have a predominant role in bone tissue regeneration due to their high capacity to enhance osteoinduction, osteoconduction, and osteointegration, as well as their encapsulation efficiency and protection capability of bioactive agents. Selection of appropriated polymeric matrices is fundamental and consequently great efforts have been invested to increase the range of properties of available materials through copolymerization, blending, or combining structures constituted by different materials. Scaffolds can be obtained from different processes that differ in characteristics, such as texture or porosity. Probably, electrospinning has the greater relevance, since the obtained nanofiber membranes have a great similarity with the extracellular matrix and, in addition, they can easily incorporate functional and bioactive compounds. Coaxial and emulsion electrospinning processes appear ideal to generate complex systems able to incorporate highly different agents. The present review is mainly focused on the recent works performed with Hap-loaded scaffolds having at least one structural layer composed of core/shell nanofibers.

Bisphosphonates Targeting Ion Channels and Musculoskeletal Effects

Bisphosphonates (BPs) are the most used bone-specific anti-resorptive agents, often chosen as first-line therapy in several bone diseases characterized by an imbalance between osteoblast-mediated bone production and osteoclast-mediated bone resorption. BPs target the farnesyl pyrophosphate synthase (FPPS) in osteoclasts, reducing bone resorption. Lately, there has been an increasing interest in BPs direct pro-survival/pro-mineralizing properties in osteoblasts and their pain-relieving effects. Even so, molecular targets involved in these effects appear now largely elusive. Ion channels are emerging players in bone homeostasis. Nevertheless, the effects of BPs on these proteins have been poorly described. Here we reviewed the actions of BPs on ion channels in musculoskeletal cells. In particular, the TRPV1 channel is essential for osteoblastogenesis. Since it is involved in bone pain sensation, TRPV1 is a possible alternative target of BPs. Ion channels are emerging targets and anti-target for bisphosphonates. Zoledronic acid can be the first selective musculoskeletal and vascular KATP channel blocker targeting with high affinity the inward rectifier channels Kir6.1-SUR2B and Kir6.2-SUR2A. The action of this drug against the overactive mutants of KCNJ9-ABCC9 genes observed in the Cantu’ Syndrome (CS) may improve the appropriate prescription in those CS patients affected by musculoskeletal disorders such as bone fracture and bone frailty.

Composite Drug Delivery System Based on Amorphous Calcium Phosphate-Chitosan: An Efficient Antimicrobial Platform for Extended Release of Tetracycline

One major warning emerging during the first worldwide combat against healthcare-associated infections concerns the key role of the surface in the storage and transfer of the virus. Our study is based on the laser coating of surfaces with an inorganic/organic composite mixture of amorphous calcium phosphate–chitosan–tetracycline that is able to fight against infectious agents, but also capable of preserving its activity for a prolonged time, up to several days. The extended release in simulated fluids of the composite mixture containing the drug (tetracycline) was demonstrated by mass loss and UV–VIS investigations. The drug release profile from our composite coatings proceeds via two stages: an initial burst release (during the first hours), followed by a slower evolution active for the next 72 h, and probably more. Optimized coatings strongly inhibit the growth of tested bacteria (Enterococcus faecalis and Escherichia coli), while the drug incorporation has no impact on the in vitro composite’s cytotoxicity, the coatings proving an excellent biocompatibility sustaining the normal development of MG63 bone-like cells. One may, therefore, consider that the proposed coatings’ composition can open the prospective of a new generation of antimicrobial coatings for implants, but also for nosocomial and other large area contamination prevention.

Formation of Myoglobin Corona at Polymer Microparticles

Adsorption of myoglobin molecules at negatively charged polystyrene microparticles was studied using the dynamic light scattering (DLS), electrophoresis (LDV) and the solution depletion method involving atomic force microscopy (AFM). The measurements were carried out at pH 3.5 and NaCl concentration of 10−2 and 0.15 M. Initially, the stability of myoglobin solutions and the particle suspensions as a function of pH were determined. Afterward, the formation of myoglobin molecule corona was investigated via the direct electrophoretic mobility measurements, which were converted to the zeta potential. The experimental results were quantitatively interpreted in terms of the general electrokinetic model. This approach yielded the myoglobin corona coverage under in situ conditions. The maximum hard corona coverage was determined using the AFM concentration depletion method. It was equal to 0.9 mg m−2 for the NaCl concentration in the range 0.01 to 0.15 M and pH 3.5. The electrokinetic properties of the corona were investigated using the electrophoretic mobility measurements for a broad pH range. The obtained results confirmed that thorough physicochemical characteristics of myoglobin molecules can be acquired using nM amounts of the protein. It was also argued that this method can be used for performing electrokinetic characteristics of other proteins such as the SARS-Cov-2 spike protein exhibiting, analogously to myoglobin, a positive charge at acidic pHs.

Adsorption kinetic of myoglobin on mica and silica - Role of electrostatic interactions

Adsorption kinetics of myoglobin molecules on mica and silica was studied using the atomic force microscopy (AFM), the colloid enhancement and the quartz microbalance (QCM) methods. Measurements were carried out for the NaCl concentration of 0.01 and 0.15 M as a function of pH comprising pH 7.4 stabilized by the PBS buffer. The electrophoretic mobility measurements enabled to derive the molecules zeta potential as a function of pH. The isoelectric point appearing at pH 5, is lower than that predicted from the theoretical calculations of the nominal dissociation charge. The AFM investigations confirmed that myoglobin molecules irreversibly adsorb at pH 3.5 yielding well-defined layers of single molecules. These layers were characterized using the colloid enhancement method involving polymer microparticles for pH range 3-9. The microparticle deposition kinetics was adequately interpreted in terms of a hybrid random sequential adsorption model. It is confirmed that the myoglobin layers exhibit a negligible zeta potential at pH equal to 5 in accordance with the electrophoretic mobility measurements. Analogous adsorption kinetic measurements were performed for the silica substrate using QCM and AFM. It is observed that myoglobin molecules irreversibly adsorb at pH 3.5 forming stable layers of single molecules. On the other hand, its adsorption kinetics at larger pHs was much slower exhibiting a poorly defined maximum coverage. This was attributed to aggregation of the myoglobin solutions due to their vanishing charge. The kinetic QCM runs were adequately interpreted in terms of a theoretical model combining the Smoluchowski aggregation theory with the convective diffusion mass transfer theory.

Synthesis and biological activities of drugs for the treatment of osteoporosis

Osteoporosis is an asymptomatic progressive disease. With the improvement of people's living standard and the aging of population, osteoporosis and its fracture have become one of the main diseases threatening the aging society. The serious medical and social burden caused by this has aroused wide public concern. Osteoporosis is listed as one of the three major diseases of the elderly. At present, the drugs for osteoporosis include bone resorption inhibitors and bone formation promoters. The purpose of these anti-osteoporosis drugs is to balance osteoblast bone formation and osteoclast bone resorption. With the development of anti-osteoporosis drugs, new anti osteoporosis drugs have been designed and synthesized. There are many kinds of new compounds with anti osteoporosis activity, but most of them are concentrated on the original drugs with anti osteoporosis activity, or the natural products with anti-osteoporosis activity are extracted from the natural products for structural modification to obtain the corresponding derivatives or analogues. These target compounds showed good ALP activity in vitro and in vivo, promoted osteoblast differentiation and mineralization, or had anti TRAP activity, inhibited osteoclast absorption. This work attempts to systematically review the studies on the synthesis and bioactivity of anti-osteoporosis drugs in the past 10 years. The structure-activity relationship was discussed, which provided a reasonable idea for the design and development of new anti-osteoporosis drugs.

Highly Porous Amorphous Calcium Phosphate for Drug Delivery and Bio-Medical Applications

Amorphous calcium phosphate (ACP) has shown significant effects on the biomineralization and promising applications in bio-medicine. However, the limited stability and porosity of ACP material restrict its practical applications. A storage stable highly porous ACP with Brunauer-Emmett-Teller surface area of over 400 m2/g was synthesized by introducing phosphoric acid to a methanol suspension containing amorphous calcium carbonate nanoparticles. Electron microscopy revealed that the porous ACP was constructed with aggregated ACP nanoparticles with dimensions of several nanometers. Large angle X-ray scattering revealed a short-range atomic order of <20 Å in the ACP nanoparticles. The synthesized ACP demonstrated long-term stability and did not crystallize even after storage for over 14 months in air. The stability of the ACP in water and an α-MEM cell culture medium were also examined. The stability of ACP could be tuned by adjusting its chemical composition. The ACP synthesized in this work was cytocompatible and acted as drug carriers for the bisphosphonate drug alendronate (AL) in vitro. AL-loaded ACP released ~25% of the loaded AL in the first 22 days. These properties make ACP a promising candidate material for potential application in biomedical fields such as drug delivery and bone healing.

Bisphosphonate-Functionalized Scaffolds for Enhanced Bone Regeneration

The local sustained release of bioactive substances are attracting increasing attention in bone tissue engineering, which is beneficial to bone tissue formation and helps to improve the bone ingrowth ability of a scaffold. Bisphosphonates (BPs), as a representative kind of osteoclast inhibitors, are proven to possess excellent osteogenic induction capability. Accordingly, various physical and chemical strategies are developed to functionalize bone tissue scaffolds with BPs to achieve controlled release profiles. Compared with traditional treatment modalities, local release of BPs from these composite scaffolds will contribute to continuous bone integration without the risk of many complications. This review explores the molecular mechanisms of BPs on bone metabolism and analyzes the appropriate concentrations of BPs that promote bone regeneration. The advanced BP loading strategies, implant modification technologies, and BP-loaded composite scaffolds based on different matrices are summarized. Finally, the latest advances and the future development of BP-modified scaffolds for enhanced bone regeneration are discussed. This article provides leading-edge design strategies of the BP-functionalized bone engineering scaffolds for improved bone repairability.

Bisphosphonates-much more than only drugs for bone diseases

α,α-Bisphosphonates (BPs) are well established in the treatment of bone diseases such as osteoporosis and Paget's disease. Their successful application originates from their high affinity to hydroxyapatite. While the initially appreciated features of BPs are already beneficial to many patients, recent developments have further expanded their pleiotropic applications. This review describes the background of the interactions of BPs with bone cells that form the basis of the classical treatment. A better understanding of the mechanism behind their interactions allows for the parallel application of BPs against bone cancer and metastases followed by palliative pain relief. Targeted therapy with bone-seeking BPs coupled with a diagnostic agent in one particle resulted in theranostics which is also described here. For example, in such a system, BP moieties are bound to contrast agents used in magnetic resonance imaging or radionuclides used in positron emission tomography. In addition, another example of the pleiotropic function of BPs which involves targeting the imaging agents to bone tissues accompanied by pain reduction is presented in this work.

The Cooperative Effect of Size and Crystallinity Degree on the Resorption of Biomimetic Hydroxyapatite for Soft Tissue Augmentation

Two kinds of hydroxyapatite (HA) crystals were studied as subcutaneous fillers in order to evaluate how their different degree of crystallinity and dimensions influence in vivo resorption. By appropriately adjusting the synthesis temperature, poorly crystalline HA (HApc) and highly crystalline HA (HAhc) were synthesized into clusters of needle-shaped crystals of about 50 nm and plate-shaped crystals of about 100 nm, respectively. The clusters of HApc had larger dimensions (30 μm) than those of HAhc (3 μm). Subcutaneous in vivo inoculations were performed in ten 6-month-old FVB female mice. HAhc underwent complete macroscopic resorption already 4 weeks after the implantation while HApc still showed agglomerates at the eighth week. This unexpected finding may be ascribed to the different size and morphology of the HAhc nanocrystals responsible for a lower aggregation and microcluster dimension than HApc nanocrystals.

Calcium phosphate-based nanosystems for advanced targeted nanomedicine

Synthetic calcium phosphates (CaPs) are the most widely accepted bioceramics for the repair and reconstruction of bone tissue defects. The recent advancements in materials science have prompted a rapid progress in the preparation of CaPs with nanometric dimensions, tailored surface characteristics, and colloidal stability opening new perspectives in their use for applications not strictly related to bone. In particular, the employment of CaPs nanoparticles as carriers of therapeutic and imaging agents has recently raised great interest in nanomedicine. CaPs nanoparticles, as well as other kinds of nanoparticles, can be engineered to specifically target the site of the disease (cells or organs), thus minimizing their dispersion in the body and undesired organism-nanoparticles interactions. The most promising and efficient approach to improve their specificity is the 'active targeting', where nanoparticles are conjugated with a targeting moiety able to recognize and bind with high efficacy and selectivity to receptors that are highly expressed only in the therapeutic site. The aim of this review is to give an overview on advanced targeted nanomedicine with a focus on the most recent reports on CaP nanoparticles-based systems, specifically designed for the active targeting. The distinctive characteristics of CaP nanoparticles with respect to the other kinds of nanomaterials used in nanomedicine are also discussed.

Hydroxyapatite nanocrystals as a smart, pH sensitive, delivery system for kiteplatin

Hydroxyapatite (HA) nanocrystals are important inorganic constituents of biological hard tissues in vertebrates and have been proposed as a bone substitute or a coating material for prostheses in biomedicine. Hydroxyapatite is also amenable for its capacity to bind to a great variety of biomolecules and therapeutic agents. As drug carriers, apatite nanoparticles also have the advantage of pH dependent solubility and low toxicity. Thus HA nanoparticles are negligibly soluble at physiological pH but their dissolution is accelerated at lower pH such as that typically found in the vicinity of tumors. In the present study we have investigated the adsorption on and the release from biomimetic HA nanoparticles of two platinum derivatives of cis-1,4-diaminocyclohexane ([PtX2(cis-1,4-DACH)], X2 = Cl2 (1) and 1,1-cyclobutanedicarboxylate (CBDCA, 2)). The first of the two compounds proved to be active against colon cancer cells also resistant to oxaliplatin. The release has been investigated as a function of pH to mimic the different physiological environments of healthy tissues and tumors, and the in vitro cytotoxicity of the releasates from the HA matrices has been assessed against various human cancer cell lines. The results fully confirmed the potential of 1-loaded HA nanoparticles as bone-specific drug delivery devices.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Current concepts in bone metastasis, contemporary therapeutic strategies and ongoing clinical trials

Background

Elucidation of mechanisms regulating bone metastasis has progressed significantly in recent years and this has translated to many new therapeutic options for patients with bone metastatic cancers. However, the rapid rate of progress in both the basic science literature and therapies undergoing clinical trials makes staying abreast with current developments challenging. This review seeks to provide an update on the current state of the science in bone metastasis research and give a snap shot of therapies in clinical trials for bone metastatic cancer.

Main body

Bone metastasis represents a difficult to treat clinical scenario due to pain, increased fracture risk, decreased quality of life and diminished overall survival outcomes. Multiple types of cancer have the specific ability to home to the bone microenvironment and cause metastatic lesions. This osteotropism was first described by Stephen Paget nearly 100 years ago as the ‘seed and soil’ hypothesis. Once cancer cells arrive at the bone they encounter a variety of cells native to the bone microenvironment which contribute to the establishment of bone metastatic lesions. In the first part of this review, the ‘seed and soil’ hypothesis is revisited while emphasizing recent developments in understanding the impact of native bone microenvironment cells on the metastatic process. Next, approved therapies for treating bone metastasis at the systemic level as well as those that target the bone microenvironment are discussed and current National Comprehensive Cancer Network (NCCN) guidelines relating to treatment of bone metastases are summarized. Finally, all open interventional clinical trials for therapies relating to treatment of bone metastasis have been complied and categorized.

Conclusion

Understanding the recent advancements in bone metastasis research is important for continued development of novel bone targeted therapies. The plethora of ongoing clinical trials will hopefully translate into improved treatments options for patients suffering from bone metastatic cancers.

Spectroscopic Study of the Interaction between Horse Heart Myoglobin and Zirconium(IV)-Substituted Polyoxometalates as Artificial Proteases

A recent study [Angew. Chem. Int. Ed. 2015, 54, 7391-7394] has shown that horse heart myoglobin (HHM) is selectively hydrolyzed by a range of zirconium(IV)-substituted polyoxometalates (POMs) under mild conditions. In this study, the molecular interactions between the Zr-POM catalysts and HHM are investigated by using a range of complementary techniques, including circular dichroism (CD), UV/Vis spectroscopy, tryptophan fluorescence spectroscopy, and ¹ H and ³¹ P NMR spectroscopy. A tryptophan fluorescence quenching study reveals that, among all examined Zr-POMs, the most reactive POM, 2:2 Zr^IV -Keggin, exhibits the strongest interaction with HHM. ³¹ P NMR spectroscopy studies show that this POM dissociates in solution, resulting in the formation of a monomeric 1:1 Zr^IV -Keggin structure, which is likely to be a catalytically active species. In the presence of Zr^IV -POMs, HHM does not undergo complete denaturation, as evidenced by CD, UV/Vis, tryptophan fluorescence, and ¹ H NMR spectroscopy. CD spectroscopy shows a gradual decrease in the α-helical content of HHM upon addition of Zr^IV -POMs. The largest effect is observed in the presence of a large Zr^IV -Wells-Dawson structure, whereas small Zr^IV -Lindqvist POM has the least influence on the decrease in the α-helical content of HHM. In all cases, the Soret band at λ=409 nm is maintained in the presence of all examined Zr-POMs, which indicates that no conformational changes in the protein occur near the heme group.

Bisphosphonate-Functionalized Imaging Agents, Anti-Tumor Agents and Nanocarriers for Treatment of Bone Cancer

Bone metastases result from the invasion of primary tumors to bone. Current treatment modalities include local treatments such as surgery and radiotherapy, while systemic treatments include chemotherapy and (palliative) treatment of skeletal metastases. Nevertheless, once bone metastases have been established they remain incurable leading to morbidity and mortality. Bisphosphonates are a well-established class of drugs, which are increasingly applied in the treatment of bone cancers owing to their effective inhibition of tumor cells and suppression of bone metastases. The increased understanding of the mechanism of action of bisphosphonates on bone and tumor cells has prompted the development of novel bisphosphonate-functionalized imaging and therapeutic agents. This review provides an update on the preclinical efficacy of bisphosphonate-functionalized fluorophore, anti-tumor agents and nanocarriers for the treatment of bone metastases. After an overview of the general characteristics of bisphosphonates and their mechanisms of action, an outline is provided on the various conjugation strategies that have become available to functionalize imaging agents, anti-tumor agents and nanocarriers with bisphosphonates. Finally, the efficacy of these bisphosphonate-modified agents and carriers in preclinical studies is evaluated by reviewing their potential to target tumors and inhibit tumor growth in clinically relevant animal models for the treatment of bone cancer.

Facile fabrication of bioactive ultra-small protein–hydroxyapatite nanoconjugates via liquid-phase laser ablation and their enhanced osteogenic differentiation activity

Ultra-small protein–hydroxyapatite nanoconjugates promote the osteogenic differentiation of mesenchymal stem cells.

Predicting the Structure-Activity Relationship of Hydroxyapatite-Binding Peptides by Enhanced-Sampling Molecular Simulation

Understanding the molecular structural and energetic basis of the interactions between peptides and inorganic surfaces is critical to their applications in tissue engineering and biomimetic material synthesis. Despite recent experimental progresses in the identification and functionalization of hydroxyapatite (HAP)-binding peptides, the molecular mechanisms of their interactions with HAP surfaces are yet to be explored. In particular, the traditional method of molecular dynamics (MD) simulation suffers from insufficient sampling at the peptide-inorganic interface that renders the molecular-level observation dubious. Here we demonstrate that an integrated approach combining bioinformatics, MD, and metadynamics provides a powerful tool for investigating the structure-activity relationship of HAP-binding peptides. Four low charge density peptides, previously identified by phage display, have been considered. As revealed by bioinformatics and MD, the binding conformation of the peptides is controlled by both the sequence and the amino acid composition. It was found that formation of hydrogen bonds between lysine residue and phosphate ions on the surface dictates the binding of positively charged peptide to HAP. The binding affinities of the peptides to the surface are estimated by free energy calculation using parallel-tempering metadynamics, and the results compare favorably to measurements reported in previous experimental studies. The calculation suggests that the charge density of the peptide primarily controls the binding affinity to the surface, while the backbone secondary structure that may restrain side chain orientation toward the surface plays a minor role. We also report that the application of enhanced-sampling metadynamics effects a major advantage over the steered MD method by significantly improving the reliability of binding free energy calculation. In general, our novel integration of diverse sampling techniques should contribute to the rational design of surface-recognition peptides in biomedical applications.

Low-Index ZnO Crystal Plane-Specific Binding Behavior of Whole Immunoglobulin G Proteins

Crystallographic surface-resolved examination of protein-ZnO interactions can greatly enhance the fundamental understanding of protein adsorption on these technologically important solid surfaces which, in turn, will be tremendously valuable for the emerging applications of ZnO-based biomaterials and biosensors. We examine experimentally and via computer simulations the intriguing differences in the adsorption preferences and binding behavior of whole immunoglobulin G (IgG) proteins to various, low-index ZnO crystal surfaces at the individual biomolecule level. By performing direct atomic force microscopy imaging, we determine that IgG predominantly binds to the ZnO plane of (101̅0) relative to the other three low-index planes of (0001), (0001̅), and (112̅0). This phenomenon is highly unusual, particularly considering the fact that the average binding energy of amino acids (AAs) on the ZnO (0001) facet is higher than that on the (101̅0) plane. In conjunction with combined Monte Carlo-molecular dynamics simulations, we further explain the possible origins of our unusual experimental findings with critical factors such as the specific spatial locations of strongly binding AAs in the protein and their spatial distributions on the exterior surface of the protein.

Small molecules and their controlled release that induce the osteogenic/chondrogenic commitment of stem cells

Stem cell-based tissue engineering plays a significant role in skeletal system repair and regenerative therapies. However, stem cells must be differentiated into specific mature cells prior to implantation (direct implantation may lead to tumour formation). Natural or chemically synthesised small molecules provide an efficient, accurate, reversible, and cost-effective way to differentiate stem cells compared with bioactive growth factors and gene-related methods. Thus, investigating the influences of small molecules on the differentiation of stem cells is of great significance. Here, we review a series of small molecules that can induce or/and promote the osteogenic/chondrogenic commitment of stem cells. The controlled release of these small molecules from various vehicles for stem cell-based therapies and tissue engineering applications is also discussed. The extensive studies in this field represent significant contributions to stem cell-based tissue engineering research and regenerative medicine.

The enamel protein amelotin is a promoter of hydroxyapatite mineralization

Amelotin (AMTN) is a recently discovered protein that is specifically expressed during the maturation stage of dental enamel formation. It is localized at the interface between the enamel surface and the apical surface of ameloblasts. AMTN knock-out mice have hypomineralized enamel, whereas transgenic mice overexpressing AMTN have a compact but disorganized enamel hydroxyapatite (HA) microstructure, indicating a possible involvement of AMTN in regulating HA mineralization directly. In this study, we demonstrated that recombinant human (rh) AMTN dissolved in a metastable buffer system, based on light scattering measurements, promotes HA precipitation. The mineral precipitates were characterized by scanning and transmission electron microscopy and electron diffraction. Colloidal gold immunolabeling of AMTN in the mineral deposits showed that protein molecules were associated with HA crystals. The binding affinity of rh-AMTN to HA was found to be comparable to that of amelogenin, the major protein of the forming enamel matrix. Overexpression of AMTN in mouse calvaria cells also increased the formation of calcium deposits in the culture medium. Overexpression of AMTN during the secretory stage of enamel formation in vivo resulted in rapid and uncontrolled enamel mineralization. Site-specific mutagenesis of the potential serine phosphorylation motif SSEEL reduced the in vitro mineral precipitation to less than 25%, revealing that this motif is important for the HA mineralizing function of the protein. A synthetic short peptide containing the SSEEL motif was only able to facilitate mineralization in its phosphorylated form ((P)S(P) SEEL), indicating that this motif is necessary but not sufficient for the mineralizing properties of AMTN. These findings demonstrate that AMTN has a direct influence on biomineralization by promoting HA mineralization and suggest a critical role for AMTN in the formation of the compact aprismatic enamel surface layer during the maturation stage of amelogenesis.

Adsorption on apatitic calcium phosphates for drug delivery: interaction with bisphosphonate molecules

Bisphosphonates (BPs) are well established as an important class of drugs for the treatment and prevention of several bone disorders including osteoporosis. This work investigated the interaction of two bisphosphonates, risedronate and tiludronate, with several apatitic supports, a well-crystallised hydroxyapatite (HA) and nanocrystalline apatites with varying maturation times, chemical composition and surface characteristics. The purpose was to fully understand the adsorption mechanism and desorption process, by the evaluation of the effect of several physicochemical parameters (temperature, pH and concentration of calcium and phosphate ions). Whatever the nature of the BP and the structure and composition of the apatite, the adsorption of such anti-resorptive agents can be well described as an ion exchange-reaction between phosphates species on the apatitic surface and BP molecules in solution. However, the parameters of adsorption can vary depending on the physicochemical conditions of the adsorption reaction. In addition, the structure and composition of the apatitic surface also influence the adsorption properties. Finally, BPs molecules are slowly released from apatitic supports, because most of the adsorbed molecules are irreversibly bound and not spontaneously released by dilution or simple washing. Moreover, similar to their adsorption, the release of bisphosphonates is strongly affected not only by the chemical properties of the molecule, but also by the chemical and structural characteristics of the apatitic substrates. The understanding of the adsorption and release processes provides fundamental tools for the development of drug delivery systems using apatite materials.

Synthesis, characterization and in vitro evaluation of new composite bisphosphonate delivery systems

In this study, new composite bisphosphonate delivery systems were obtained from polyurethanes (PUs) and nanocrystalline hydroxyapatite (HA). The biodegradable PUs were first synthesized from poly(ε-caprolactone) diols (PCL diols), poly(ethylene adipate) diol, 1,6-hexamethylene diisocyanate, 1,4-butanediol and HA. Moreover, the PCL diols were synthesized by the ring-opening polymerization catalysed by the lipase from Candida antarctica. Next, composite drug delivery systems for clodronate were prepared. The mechanical properties of the obtained biomaterials were determined. The cytotoxicity of the synthesized polymers was tested. The preliminary results show that the obtained composites are perspective biomaterials and they can be potentially applied in the technology of implantation drug delivery systems.

Functionalized ceramics for biomedical, biotechnological and environmental applications

Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies for alumina, zirconia, titania, silica, iron oxide and calcium phosphate are presented and discussed. These materials have become particularly important concerning the aforementioned applications, being not only of great academic, but also of steadily increasing human and commercial, interest. In this review, special emphasis is given to their use as biomaterials, biosensors, biological targets, drug delivery systems, implants, chromatographic supports for biomolecule purification and analysis, and adsorbents for toxic substances and pollutants. The objective of this review is to provide a broad picture of the enormous possibilities offered by surface functionalization and to identify particular challenges regarding surface analysis and characterization.

Blood meal-based compound. Good choice as iron fertilizer for organic farming

Prevention of iron chlorosis with Fe synthetic chelates is a widespread agronomical practice but implies high costs and environmental risks. Blood meal is one of the main fertilizers allowed to be used in organic farming. Through this work a novel blood meal fertilizer was audited. Measurements such as FTIR, Raman, electron paramagnetic resonance, and Mössbauer spectroscopy, UV-visible properties, stability against pH, and batch experiments were performed to characterize and assess the reactivity on soil constituents and agronomic soils. The spectroscopy findings give clear indications that Fe is in the ferric oxidation state, is hexacoordinated, and has a low-spin form suggesting a similar structure to hemin and hematin. A spectrophotometric method at 400 nm was validated to quantify blood meal concentration at low electrolyte concentrations. Batch experiments demonstrated high reactivity of blood meal fertilizer with soil constituents, mainly in the presence of calcium, where aggregation processes are predominant, and its ability to take Fe from synthetic Fe (hydr)oxides. The beneficial profile of blood meal by a providing nitrogen source together with the capability to keep the Fe bound to porphyrin organic compounds makes it a good candidate to be used as Fe fertilizer in organic farming.

Hydroxylapatite nanoparticles: fabrication methods and medical applications

Hydroxylapatite (or hydroxyapatite, HAp) exhibits excellent biocompatibility with various kinds of cells and tissues, making it an ideal candidate for tissue engineering, orthopedic and dental applications. Nanosized materials offer improved performances compared with conventional materials due to their large surface-to-volume ratios. This review summarizes existing knowledge and recent progress in fabrication methods of nanosized (or nanostructured) HAp particles, as well as their recent applications in medical and dental fields. In section 1, we provide a brief overview of HAp and nanoparticles. In section 2, fabrication methods of HAp nanoparticles are described based on the particle formation mechanisms. Recent applications of HAp nanoparticles are summarized in section 3. The future perspectives in this active research area are given in section 4.

A neutron reflection study of adsorbed deuterated myoglobin layers on hydrophobic surfaces

The structure of adsorbed globular protein layers on hydrophobic surfaces is elucidated in detail by combining the use of a fully deuterated protein, myoglobin, and the neutron reflectivity technique. The hydrophobic surfaces consist of grafted self-assembled monolayer of octadecyltrichlorosilane (OTS) and polystyrene (PS) layer on silicon substrates. Different protein concentrations ranging from 1mg/ml to 0.01 mg/ml are used. On the OTS surface and for low protein concentration, the adsorbed protein layer consists of a dense layer of thickness around 13Å indicating that proteins are denaturated when adsorbed on the hydrophobic interface - myoglobin being a globular protein with an average diameter of about 40Å. At high protein concentration, an additional layer is observed on the top of this first denaturated layer. The thickness of this layer corresponds roughly to the dimensions of the myoglobin suggesting that additional proteins in their bulk conformation are adsorbed on the top. In the case of PS, the protein is significantly less flattened at the interface, PS being a less hydrophobic surface.

Silica xerogels and hydroxyapatite nanocrystals for the local delivery of platinum-bisphosphonate complexes in the treatment of bone tumors: a mini-review

The present review focuses on the "drug targeting and delivery" approach of the selective transportation of cisplatin to bone tumors and bone metastases. This aim is realized by binding cisplatin to (bis)phosphonate ligands or their derivatives. Geminal bisphosphonates are in clinical use in the treatment of several bone-related diseases because of their high affinity for calcium ions and hence for bones. Platinum-bisphosphonate complexes may be easily loaded onto calcium-containing inorganic matrices, such as calcium-doped sol-gel derived silica xerogels and hydroxyapatite nanocrystals, for local administration at the site of the bone malignancy. The composites may be used as bone-filler materials that, in addition to their action as bone substitutes, can also act as controlled platinum-drug releasing agents. The release kinetics of the drug can be tailored for specific therapeutic applications modulating the physico-chemical features of the inorganic matrices. Moreover, apatite nanocrystals loaded with platinum-bisphosphonate prodrugs can be used as injectable material for nanomedical applications (e.g. intracellular drug delivery).

Coordination chemistry of Ca sites at the surface of nanosized hydroxyapatite: interaction with H₂O and CO

The affinity towards water of a selection of well-defined, nanostructured hydroxyapatite (HA) samples was investigated by H(2)O vapour adsorption microcalorimetry and infrared (IR) spectroscopy. A large hydrophilicity of all investigated materials was confirmed. The surface features of hydrated HA were investigated on the as-synthesized samples pre-treated in mild conditions at T=303 K, whereas dehydrated HA features were characterized on samples activated at T=573 K. The relatively large hydrophilicity of the hydrated surface (-Δ(ads)H~100-50 kJ mol(-1)) was due to the interaction of water with the highly polarized H(2)O molecules strongly coordinated to the surface Ca(2+) cations. At the dehydrated surface, exposing coordinatively unsaturated (cus) Ca(2+) cations, H(2)O was still molecularly adsorbed but more strongly (-Δ(ads)H~120-90 kJ mol(-1)). The use of CO adsorption to quantify the Lewis acidic strength of HA surface sites revealed only a moderate strength of cus Ca(2+) cations, as confirmed by both microcalorimetric and IR spectroscopic measurements and ab initio calculations. This result implies that the large HA/H(2)O interaction energy is due to the interplay between cus Ca(2+) sites and nearby hydrophilic PO(4) groups, not revealed by the CO probe. The lower density of cus Ca(2+) cations at the 573 K activated HA surface with respect to the pristine one did not affect the whole hydrophilicity of the surface, as the polarizing effect of Ca sites is so strong to extend up to the fourth hydrated layer, as confirmed by both high-coverage microcalorimetric and IR spectroscopic data. No specific effects due to the investigated specimen preparation method and/or different morphology were observed.

Modulating protein adsorption onto hydroxyapatite particles using different amino acid treatments

Hydroxyapatite (HA) is a material of choice for bone grafts owing to its chemical and structural similarities to the mineral phase of hard tissues. The combination of osteogenic proteins with HA materials that carry and deliver the proteins to the bone-defective areas will accelerate bone regeneration. The study investigated the treatment of HA particles with different amino acids such as serine (Ser), asparagine (Asn), aspartic acid (Asp) and arginine (Arg) to enhance the adsorption ability of HA carrier for delivering therapeutic proteins to the body. The crystallinity of HA reduced when amino acids were added during HA preparation. Depending on the types of amino acid, the specific surface area of the amino acid-functionalized HA particles varied from 105 to 149 m(2) g(-1). Bovine serum albumin (BSA) and lysozyme were used as model proteins for adsorption study. The protein adsorption onto the surface of amino acid-functionalized HA depended on the polarities of HA particles, whereby, compared with lysozyme, BSA demonstrated higher affinity towards positively charged Arg-HA. Alternatively, the binding affinity of lysozyme onto the negatively charged Asp-HA was higher when compared with BSA. The BSA and lysozyme adsorptions onto the amino acid-functionalized HA fitted better into the Freundlich than Langmuir model. The amino acid-functionalized HA particles that had higher protein adsorption demonstrated a lower protein-release rate.

Design and characterization of protein-quercetin bioactive nanoparticles

Background

The synthesis of bioactive nanoparticles with precise molecular level control is a major challenge in bionanotechnology. Understanding the nature of the interactions between the active components and transport biomaterials is thus essential for the rational formulation of bio-nanocarriers. The current study presents a single molecule of bovine serum albumin (BSA), lysozyme (Lys), or myoglobin (Mb) used to load hydrophobic drugs such as quercetin (Q) and other flavonoids.

Results

Induced by dimethyl sulfoxide (DMSO), BSA, Lys, and Mb formed spherical nanocarriers with sizes less than 70 nm. After loading Q, the size was further reduced by 30%. The adsorption of Q on protein is mainly hydrophobic, and is related to the synergy of Trp residues with the molecular environment of the proteins. Seven Q molecules could be entrapped by one Lys molecule, 9 by one Mb, and 11 by one BSA. The controlled releasing measurements indicate that these bioactive nanoparticles have long-term antioxidant protection effects on the activity of Q in both acidic and neutral conditions. The antioxidant activity evaluation indicates that the activity of Q is not hindered by the formation of protein nanoparticles. Other flavonoids, such as kaempferol and rutin, were also investigated.

Conclusions

BSA exhibits the most remarkable abilities of loading, controlled release, and antioxidant protection of active drugs, indicating that such type of bionanoparticles is very promising in the field of bionanotechnology.

Electrically polarized biphasic calcium phosphates: adsorption and release of bovine serum albumin

In this study, we applied electrical polarization technique to increase adsorption and control protein release from biphasic calcium phosphate (BCP). Three different biphasic calcium phosphate (BCP) composites, with hydroxyapatite (HAp) and β-tricalcium phosphate (β-TCP), were processed and electrically polarized. Our study showed that stored charge was increased in the composites with the increase in HAp percentage. Adsorption of bovine serum albumin (BSA), as a model protein, on the poled as well as unpoled surfaces of the composites was studied. The highest amount of BSA adsorption was obtained on positively poled surfaces of each composite. Adsorption isotherm study suggested a multilayer adsorption of BSA on the BCP composites. The effect of electrical polarization on BSA release kinetics from positively charged BCP surfaces was studied. A gradual increase in percent BSA release from positively charged BCP surfaces with decreasing stored charge was observed. Our study showed that the BCP based composites have the potential to be used as a drug or growth factor delivery vehicle.

Evolving application of biomimetic nanostructured hydroxyapatite

By mimicking Nature, we can design and synthesize inorganic smart materials that are reactive to biological tissues. These smart materials can be utilized to design innovative third-generation biomaterials, which are able to not only optimize their interaction with biological tissues and environment, but also mimic biogenic materials in their functionalities. The biomedical applications involve increasing the biomimetic levels from chemical composition, structural organization, morphology, mechanical behavior, nanostructure, and bulk and surface chemical-physical properties until the surface becomes bioreactive and stimulates cellular materials. The chemical-physical characteristics of biogenic hydroxyapatites from bone and tooth have been described, in order to point out the elective sides, which are important to reproduce the design of a new biomimetic synthetic hydroxyapatite. This review outlines the evolving applications of biomimetic synthetic calcium phosphates, details the main characteristics of bone and tooth, where the calcium phosphates are present, and discusses the chemical-physical characteristics of biomimetic calcium phosphates, methods of synthesizing them, and some of their biomedical applications.

Surface-enhanced Raman scattering biomedical applications of plasmonic colloidal particles

This review article presents a general view of the recent progress in the fast developing area of surface-enhanced Raman scattering spectroscopy as an analytical tool for the detection and identification of molecular species in very small concentrations, with a particular focus on potential applications in the biomedical area. We start with a brief overview of the relevant concepts related to the choice of plasmonic nanostructures for the design of suitable substrates, their implementation into more complex materials that allow generalization of the method and detection of a wide variety of (bio)molecules and the strategies that can be used for both direct and indirect sensing. In relation to indirect sensing, we devote the final section to a description of SERS-encoded particles, which have found wide application in biomedicine (among other fields), since they are expected to face challenges such as multiplexing and high-throughput screening.

Dynamic Adsorption of Albumin on Nanostructured TiO(2)Thin Films

Spectroscopic ellipsometry was used to characterize the optical properties of thin (<5 nm) films of nanostructured titanium dioxide (TiO(2)). These films were then used to investigate the dynamic adsorption of bovine serum albumin (BSA, a model protein), as a function of protein concentration, pH, and ionic strength. Experimental results were analyzed by an optical model and revealed that hydrophobic interactions were the main driving force behind the adsorption process, resulting in up to 3.5 mg/m(2) of albumin adsorbed to nanostructured TiO(2). The measured thickness of the adsorbed BSA layer (less than 4 nm) supports the possibility that spreading of the protein molecules on the material surface occurred. Conformational changes of adsorbed proteins are important because they may subsequently lead to either accessibility or inaccessibility of bioactive sites which are ligands for cell interaction and function relevant to physiology and pathology.

A novel 3-D mineralized tumor model to study breast cancer bone metastasis

Background

Metastatic bone disease is a frequent cause of morbidity in patients with advanced breast cancer, but the role of the bone mineral hydroxyapatite (HA) in this process remains unclear. We have developed a novel mineralized 3-D tumor model and have employed this culture system to systematically investigate the pro-metastatic role of HA under physiologically relevant conditions in vitro.

Methodology/Principal Findings

MDA-MB231 breast cancer cells were cultured within non-mineralized or mineralized polymeric scaffolds fabricated by a gas foaming-particulate leaching technique. Tumor cell adhesion, proliferation, and secretion of pro-osteoclastic interleukin-8 (IL-8) was increased in mineralized tumor models as compared to non-mineralized tumor models, and IL-8 secretion was more pronounced for bone-specific MDA-MB231 subpopulations relative to lung-specific breast cancer cells. These differences were pathologically significant as conditioned media collected from mineralized tumor models promoted osteoclastogenesis in an IL-8 dependent manner. Finally, drug testing and signaling studies with transforming growth factor beta (TGFβ) confirmed the clinical relevance of our culture system and revealed that breast cancer cell behavior is broadly affected by HA.

Conclusions/Significance

Our results indicate that HA promotes features associated with the neoplastic and metastatic growth of breast carcinoma cells in bone and that IL-8 may play an important role in this process. The developed mineralized tumor models may help to reveal the underlying cellular and molecular mechanisms that may ultimately enable more efficacious therapy of patients with advanced breast cancer.