Self-assembly of ionic liquid (BMI-PF6)-stabilized gold nanoparticles on a silicon surface: chemical and structural aspects

Ionic Liquids Modulating Local Microenvironment of Ni-Fe Binary Single Atom Catalyst for Efficient Electrochemical CO2 Reduction

The Ni and Fe dual-atom catalysts still undergo strikingly attenuation under high current density and high overpotential. To ameliorate the issue, the ionic liquids with different cations or anions are used in this work to regulate the micro-surface of nitrogen-doped carbon supported Ni and Fe dual-atom sites catalyst (NiFe-N-C) by an impregnation method. The experimental data reveals the dual function of ionic liquids, which enhances CO2 adsorption ability and modulates electronic structure, facilitating CO2 anion radical (CO2 •¯) stabilization and decreasing onset potential. The theoretical calculation results prove that the attachment of ionic liquids modulates electronic structure, reduces energy barrier of CO2 •¯ formation, and enhances overall ECR performance. Based on these merits, BMImPF6 modified NiFe-N-C (NiFe-N-C/BMImPF6) achieves the high CO faradaic efficiency of 91.9% with a CO partial current density of -120 mA cm-2 at -1.0 V. When the NiFe-N-C/BMImPF6 is assembled as cathode of Zn-CO2 battery, it delivers the highest power density of 2.61 mW cm-2 at 2.57 mA cm-2 and superior cycling stability. This work will afford a direction to modify the microenvironment of other dual-atom catalysts for high-performance CO2 electroreduction.

Electrocatalyst Fabrication Using Metal Nanoparticles Prepared in Ionic Liquids

Metal nanoparticle-based electrocatalysts are widely used in electronic devices, which serve for electrochemical reactions like oxygen reduction reaction, alcohol oxidation and CO2 reduction reaction. These catalyst-dependent reactions are the key of the emerging clean energy systems. Catalyst design and synthesis therefore have received keen attention in past decades. We are motivated to study synthesis approaches of metal nanoparticle-based electrocatalysts using ionic liquids (ILs), which are promising solvents for the nanoparticle preparation because of their unique physicochemical properties. In this personal account, we review our previous and present works on nanoparticle preparation in IL and utilization of the obtained nanoparticles as electrocatalysts.

Surface modifications of Gold Nanoparticles: Stabilization and Recent Applications in Cancer Therapy

Gold nanoparticles (GNP) are noble metal nanocarriers that have been recently researched upon for pharmaceutical applications, imaging, and diagnosis. These metallic nanocarriers are easy to synthesize using chemical reduction techniques as their surface can be easily modified. Also, the properties of GNP are significantly affected by its size and shape which mandates its stabilization using suitable techniques of surface modification. Over the past decade, research has focused on surface modification of GNP and its stabilization using polymers, polysaccharides, proteins, dendrimers, and phase-stabilizers like gel phase or ionic liquid phase. The use of GNP for pharmaceutical applications requires its surface modification using biocompatible and inert surface modifiers. The stabilizers used, interact with the surface of GNP to provide either electrostatic stabilization or steric stabilization. This review extensively discusses the surface modification techniques for GNP and the related molecular level interactions involved in the same. The influence of various factors like the concentration of stabilizers used their characteristics like chain length and thickness, pH of the surrounding media, etc., on the surface of GNP and resulting to stability have been discussed in detail. Further, this review highlights the recent applications of surface-modified GNP in the management of tumor microenvironment and cancer therapy.

Sputtering onto liquids: a critical review

Sputter deposition of atoms onto liquid substrates aims at producing colloidal dispersions of small monodisperse ultrapure nanoparticles (NPs). Since sputtering onto liquids combines the advantages of the physical vapor deposition technique and classical colloidal synthesis, the review contains chapters explaining the basics of (magnetron) sputter deposition and the formation of NPs in solution. This review article covers more than 132 papers published on this topic from 1996 to September 2021 and aims at providing a critical analysis of most of the reported data; we will address the influence of the sputtering parameters (sputter power, current, voltage, sputter time, working gas pressure, and the type of sputtering plasma) and host liquid properties (composition, temperature, viscosity, and surface tension) on the NP formation as well as a detailed overview of the properties and applications of the produced NPs.

Charge-driven interaction for adsorptive removal of organic dyes using ionic liquid-modified graphene oxide

A facile approach is presented to synthesize the ionic liquid-grafted graphene oxide (GO-ImOH) for fast and efficient adsorptive removal of cationic dyes. A coupling reaction between the hydroxyl terminal of imidazolium ionic liquid and the carboxylic group of GO, yielded the GO-ImOH hybrid material. The higher surface negative charge (-32 mV) and excellent dispersibility make the GO-ImOH an efficient adsorbent for cationic dyes. The GO-ImOH showed excellent removal efficiency for methylene blue (cationic dye), whereas it could adsorb only 22% methyl orange (anionic dye). The GO-ImOH displayed significantly higher adsorptive removal capacity for cationic dye compared to that of GO adsorbent. The chemical and structural features of GO-ImOH and spectroscopic analyses (FTIR and Raman) of pristine and recovered GO-ImOH adsorbent suggested multiple adsorptive interaction pathways (electrostatic, π-cation, π-π interactions, and hydrogen linkages) between the GO-ImOH adsorbent and the dye molecules. The work paves a new direction for the development of ionic liquids-modified 2D nanomaterials for efficient and fast adsorptive removal of organic pollutants, where the adsorptive sites on the surface of 2D nanomaterials can be tuned by selecting the desired functionalities from a diversified library of cations and anions of ionic liquids.

Controlling the Amorphous and Crystalline State of Multinary Alloy Nanoparticles in An Ionic Liquid

Controlling the amorphous or crystalline state of multinary Cr-Mn-Fe-Co-Ni alloy nanoparticles with sizes in the range between ~1.7 nm and ~4.8 nm is achieved using three processing routes. Direct current sputtering from an alloy target in the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide leads to amorphous nanoparticles as observed by high-resolution transmission electron microscopy. Crystalline nanoparticles can be achieved in situ in a transmission electron microscope by exposure to an electron beam, ex situ by heating in vacuum, or directly during synthesis by using a high-power impulse magnetron sputtering process. Growth of the nanoparticles with respect to the amorphous particles was observed. Furthermore, the crystal structure can be manipulated by the processing conditions. For example, a body-centered cubic structure is formed during in situ electron beam crystallization while longer ex situ annealing induces a face-centered cubic structure.

The role and fate of capping ligands in colloidally prepared metal nanoparticle catalysts

In this Perspective article, we highlight emerging opportunities for the rational design of catalysts upon the choice, exchange, partial removal or pyrolysis of ligands.

Ionic liquid and nanoparticle hybrid systems: Emerging applications

Having novel electronic and optical properties that emanate from their nano-scale dimensions, nanoparticles are central to numerous applications. Ionic liquids can confer to nanoparticle chemical protection and physicochemical property enhancement through intermolecular interactions and can consequently improve the stability and reusability of nanoparticle for various operations. With an aim to combine the novel properties of nanoparticles and ionic liquids, different structures have been generated, based on a balance of several intermolecular interactions. Such ionic liquid and nanoparticle hybrids are showing great potential in diverse applications. In this review, we first introduce various types of ionic liquid and nanoparticle hybrids, including nanoparticle colloidal dispersions in ionic liquids, ionic liquid-grafted nanoparticles, and nanoparticle-stabilized ionic liquid-based emulsions. Such hybrid materials exhibit interesting synergisms. We then highlight representative applications of ionic liquid and nanoparticle hybrids in the catalysis, electrochemistry and separations fields. Such hybrids can attain better stability and higher efficiency under a broad range of conditions. Novel and enhanced performance can be achieved in these applications by combining desired properties of ionic liquids and of nanoparticles within an appropriate hybrid nanostructure.

Tuning the band-gap of h-boron nitride nanoplatelets by covalent grafting of imidazolium ionic liquids

Imidazolium ionic liquids having three different anions are covalently grafted on the h-boron nitride nanoplatelets to probe the shifts in the band gap energy.

Nanoparticles in ionic liquids: interactions and organization

Interactions between nanoparticles and ionic liquids can lead to a variety of organized structures.

Antibacterial activity of ordered gold nanorod arrays

Well-packed two- and three-dimensional (2D and 3D) gold nanorod (AuNR) arrays were fabricated using confined convective arraying techniques. The array density could be controlled by changing the concentration of the gold nanorods solution, the velocity of the moving substrate, and the environment air-temperature. The hydrophilic behavior of glass substrates before and after surface modification was studied through contact angle measurements. The affinity and alignment of the AuNR arrays with varying nanorod concentrations and the resulting different array densities were studied using field emission scanning electron microscopy (FE-SEM). Under stable laser intensity irradiation, the photothermal response of the prepared arrays was measured using a thermocouple and the results were analyzed quantitatively. Synthesized AuNR arrays were added to Escherichia coli (E. coli) suspensions and evaluated for photothermal bactericidal activity before and after laser irradiation. The results showed promising bactericidal effect. The severity of pathogen destruction was measured and quantified using fluorescence microscopy, bioatomic force microscopy (Bio-AFM) and flow cytometry techniques. These results indicated that the fabricated AuNR arrays at higher concentrations were highly capable of complete bacterial destruction by photothermal effect compared to the low concentration AuNR arrays. Subsequent laser irradiation of the AuNR arrays resulted in rapid photoheating with remarkable bactericidal activity, which could be used for water treatment to produce microbe-free water.

Ionic liquid-based observation technique for nonconductive materials in the scanning electron microscope: Application to the characterization of a rare earth ore

A new approach for preparing geological materials is proposed to reduce charging during their characterization in a scanning electron microscope. This technique was applied to a sample of the Nechalacho rare earth deposit, which contains a significant amount of the minerals fergusonite and zircon. Instead of covering the specimen surface with a conductive coating, the sample was immersed in a dilute solution of ionic liquid and then air dried prior to SEM analysis. Imaging at a wide range of accelerating voltages was then possible without evidence of charging when using the in-chamber secondary and backscattered electrons detectors, even at 1 kV. High resolution x-ray and electron backscatter diffraction mapping were successfully obtained at 20 and 5 kV with negligible image drifting and permitted the characterization of the microstructure of the zircon/fergusonite-Y aggregates encased in the matrix minerals. Because of the absence of a conductive layer at the surface of the specimen, the Kikuchi band contrast was improved and the backscatter electron signal increased at both 5 and 20 kV as confirmed by Monte Carlo modeling. These major developments led to an improvement of the spatial resolution and efficiency of the above characterization techniques applied to the rare earth ore and it is expected that they can be applied to other types of ores and minerals.

Synthesis of supported metal nanoparticle catalysts using ligand assisted methods

The synthesis and characterization methods of metal nanoparticles (NPs) have advanced greatly in the last few decades, allowing an increasing understanding of structure-property-performance relationships. However, the role played by the ligands used as stabilizers for metal NPs synthesis or for NPs immobilization on solid supports has been underestimated. Here, we highlight some recent progress in the preparation of supported metal NPs with the assistance of ligands in solution or grafted on solid supports, a modified deposition-reduction method, with special attention to the effects on NPs size, metal-support interactions and, more importantly, catalytic activities. After presenting the general strategies in metal NP synthesis assisted by ligands grafted on solid supports, we highlight some recent progress in the deposition of pre-formed colloidal NPs on functionalized solids. Another important aspect that will be reviewed is related to the separation and recovery of NPs. Finally, we will outline our personal understanding and perspectives on the use of supported metal NPs prepared through ligand-assisted methods.

Functional ionic liquids induced the formation of mitochondria targeted fluorescent core-shell ellipsoidal nanoparticles with anticancer properties

A functional ionic liquid (IL) (IL=4-acetyl-N-butyl pyridinium hexafluorophosphate) was synthesized and conjugated with low toxicity of nanospheres (RBITC@SiO(2)), forming a new kind of fluorescent core-shell ellipsoidal RBITC@SiO(2)-IL nanoparticle. In vitro assay results indicate that particle shape plays an important role in cellular interactions with NPs. Furthermore, the positively charged ellipsoidal RBITC@SiO(2)-IL nanoparticles can enter into HeLa cells and induce the cells to condense, split and decrease on the oxygen consumption. The enhanced cell image and decrease of mitochondria potential indicate that the ellipsoidal RBITC@SiO(2)-IL nanoparticles could be uptaken by HeLa cells through mitochondria involved path. Experimental results give us a new path to design nano-medicines through ionic liquid modified silica nanoparticles to target mitochondria.

A chemo-mechanical tweezer for single-molecular characterization of soft materials

A new atomic force microscopy (AFM)-based chemo-mechanical tweezer has been developed that can measure mechanical properties of individual macromolecules in supramolecular assembly and reveal positions of azide-containing polymers. A key feature of the new technology is the use of an AFM tip densely modified with 4-dibenzocyclooctynols (chemo-mechanical tweezer) that can react with multiple azide containing macromolecules of micelles to give triazole "clicked" compounds, which during retracting phases of AFM imaging are removed from the macromolecular assembly thereby providing a surface topographical image and positions of azide-containing polymers. The force-distance curves gave mechanical properties of removal of individual molecules from a supramolecular assembly. The new chemo-mechanical tweezer will make it possible to characterize molecular details of macromolecular assemblies thereby offering new avenues to tailor properties of such assemblies.

Influence of the ionic liquid/gas surface on ionic liquid chemistry

Applications such as gas storage, gas separation, NP synthesis and supported ionic liquid phase catalysis depend upon the interaction of different species with the ionic liquid/gas surface. Consequently, these applications cannot proceed to the full extent of their potential without a profound understanding of the surface structure and properties. As a whole, this perspective contains more questions than answers, which demonstrates the current state of the field. Throughout this perspective, crucial questions are posed and a roadmap is proposed to answer these questions. A critical analysis is made of the field of ionic liquid/gas surface structure and properties, and a number of design rules are mined. The effects of ionic additives on the ionic liquid/gas surface structure are presented. A possible driving force for surface formation is discussed that has, to the best of my knowledge, not been postulated in the literature to date. This driving force suggests that for systems composed solely of ions, the rules for surface formation of dilute electrolytes do not apply. The interaction of neutral additives with the ionic liquid/gas surface is discussed. Particular attention is focussed upon H(2)O and CO(2), vital additives for many applications of ionic liquids. Correlations between ionic liquid/gas surface structure and properties, ionic liquid surfaces plus additives, and ionic liquid applications are given.

Gemini imidazolium amphiphiles for the synthesis, stabilization, and drug delivery from gold nanoparticles

Gold nanoparticles (AuNPs) are considered useful vehicles for medical therapy and diagnosis. Despite the progress made in this field, there is need to find direct, reliable, and versatile synthetic procedures for their preparation as well as new multifunctional coating agents. In this sense, we have explored the use of imidazolium amphiphiles to prepare new AuNPs designed for anion recognition and transport. Thus, in this work we describe (a) the synthesis, by a phase transfer method, of new gold nanoparticles using gemini-type surfactants as ligands based on imidazolium salts, those ligands acting as transfer agents into organic media and also as nanoparticle stabilizers, (b) the examination of their stability in solution, (c) the chemical and physical characterization of the nanoparticles, using a variety of techniques, including UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), (d) toxicity data concerning both the imidazolium ligands and the imidazolium coated nanoparticles, (e) the assessment of their molecular recognition ability toward molecules of biological interest, such as anions and carboxylate containing model drugs, such as ibuprofen, (f) the study of their toxicity and those of their coating ligands, as well as their ability for cell internalization, and (g) the study of their ability for delivering anionic pharmaceuticals. The structurally governed triple role of those new gemini-type surfactants is responsible for the preparation, remarkable stability, and delivery properties of these functional AuNPs.

New frontiers in materials science opened by ionic liquids

Ionic liquids (ILs) including ambient-temperature molten salts, which exist in the liquid state even at room temperature, have a long research history. However, their applications were once limited because ILs were considered as highly moisture-sensitive solvents that should be handled in a glove box. After the first synthesis of moisture-stable ILs in 1992, their unique physicochemical properties became known in all scientific fields. ILs are composed solely of ions and exhibit several specific liquid-like properties, e.g., some ILs enable dissolution of insoluble bio-related materials and the use as tailor-made lubricants in industrial applications under extreme physicochemical conditions. Hybridization of ILs and other materials provides quasi-solid materials, which can be used to fabricate highly functional devices. ILs are also used as reaction media for electrochemical and chemical synthesis of nanomaterials. In addition, the negligible vapor pressure of ILs allows the fabrication of electrochemical devices that are operated under ambient conditions, and many liquid-vacuum technologies, such as X-ray photoelectron spectroscopy (XPS) analysis of liquids, electron microscopy of liquids, and sputtering and physical vapor deposition onto liquids. In this article, we review recent studies on ILs that are employed as functional advanced materials, advanced mediums for materials production, and components for preparing highly functional materials.

Direct imaging of soft-hard interfaces enabled by graphene

Direct imaging of surface molecules and the interfaces between soft and hard materials on functionalized nanoparticles is a great challenge using modern microscopy techniques. We show that graphene, a single atomic layer of sp(2)-bonded carbon atoms, can be employed as an ultrathin support film that enables direct imaging of molecular layers and interfaces in both conventional and atomic-resolution transmission electron microscopy. An atomic-resolution imaging study of the capping layers and interfaces of citrate-stabilized gold nanoparticles is used to demonstrate this novel capability. Our findings reveal the unique potential of graphene as an ideal support film for atomic-resolution transmission electron microscopy of hard and soft nanomaterials.

Synthesis and characterization of functionalized ionic liquid-stabilized metal (gold and platinum) nanoparticles and metal nanoparticle/carbon nanotube hybrids

Carboxylic acid- and amino-functionalized ionic liquids were used as the stabilizer for the systhesis of metal nanoparticles in aqueous solution. Smaller gold nanoparticles (3.5 nm) and platinum nanoparticles (2.5 nm) were prepared with NaBH4 as the reductant. Larger gold nanospheres (23, 42, and 98 nm) were synthesized using different quantities of trisodiumcitrate reductant. The morphology and the surface state of the metal nanoparticles were characterized by high-resolution transmission electron microscopy, UV-visible spectroscopy, and X-ray photoelectron spectroscopy. X-ray photoelectron spectroscopy spectra indicated that binding energies of C 1s and N 1s from ionic liquids on the surface of metal nanoparticles shifted negatively compared with that from pure ionic liquids. The mechanism of stabilization is proposed to be due to the interactions between imidazolium ions/functional groups in ionic liquids and metal atoms. Resonance Rayleigh scattering property of the functionalized ionic liquid-stabilized metal nanoparticles was also explored. It was found that amino-functionalized ionic liquid-stabilized gold nanoparticles exhibited lower resonance Rayleigh scattering intensity than trisodiumcitrate stabilized gold nanoparticles, which is expected to decrease the background of the resonance Rayleigh scattering intensity in the determination of various analytes. Moreover, it was found that all the as-prepared metal nanoparticles could be easily assembled on the multiwalled carbon nanotubes, which was confirmed by high-resolution transmission electron microscopy and energy dispersive X-ray spectroscopy. In this case, ionic liquids acted as a linker to connect metal nanoparticles with carbon nanotubes. The imidazolium ring moiety of ionic liquids might interact with the pi-electronic nanotube surface by virtue of cation-pi and/or pi-pi interactions, and the functionalized group moiety of ionic liquids might interact with the metal NPs surface. Finally, it was observed that plantinum nanoparticle/multiwalled carbon nanotube hybrids could be well dispersed in water, which may find future applications in fields such as catalysis, nanoscale electronics, as well as sensors.