Dielectrophoresis and AC-induced assembly in binary colloidal suspensions

Alternating electric-field-induced assembly of binary mixtures of soft repulsive ionic microgel colloids

An external alternating electric field is used to study the assembly of a binary mixture of Poly(N-isopropylacrylamide-co-acrylic acid) microgels in their swollen form at hydrodynamic size ratio 2:1 under deprotonated state. The AC field experiments were carried out at a fixed frequency of 100 kHz in the fluid regime for three number density ratios 1:3, 1:1 and 3:1 of big-to-small microgels using a confocal microscope. Strings with different types of co-assembly structures such as buckled, ring, flame and sandwich have been observed at low and intermediate field strengths at ratio 1:3, 1:1. In buckled and ring type, one or two small particles sit at the contact of two big particles and in the flame type, small particles arrange like a cone at end of the string. In the sandwich structure, several double small particle layers lie in between big particles. At high field strength, aggregation of strings and a phase separation into individual aggregates of strings from both big and small microgels have been observed. At higher ratio 3:1, the string formation is mostly dominated by big particles. Our experimental results are discussed with the recent simulation and experimental works on AC field induced structures in binary hard sphere mixtures.

Tunable two-dimensional assembly of colloidal particles in rotating electric fields

Tunable interparticle interactions in colloidal suspensions are of great interest because of their fundamental and practical significance. In this paper we present a new experimental setup for self-assembly of colloidal particles in two-dimensional systems, where the interactions are controlled by external rotating electric fields. The maximal magnitude of the field in a suspension is 25 V/mm, the field homogeneity is better than 1% over the horizontal distance of 250 μm, and the rotation frequency is in the range of 40 Hz to 30 kHz. Based on numerical electrostatic calculations for the developed setup with eight planar electrodes, we found optimal experimental conditions and performed demonstration experiments with a suspension of 2.12 μm silica particles in water. Thanks to its technological flexibility, the setup is well suited for particle-resolved studies of fundamental generic phenomena occurring in classical liquids and solids, and therefore it should be of interest for a broad community of soft matter, photonics, and material science.

Binary Colloidal Crystal Films Grown by Vertical Evaporation of Silica Nanoparticle Suspensions

Despite intensive research efforts in the synthesis of binary colloidal crystals, the production of well ordered binary colloidal crystal films over large areas continues to be synthetically challenging. In this paper, we investigate the phase behavior of binary mixtures of l-arginine-stabilized 36 and 22 nm silica nanoparticles deposited as centimeter-scale thin films onto a vertical substrate via evaporative assembly. By adjusting the temperature and relative colloid composition under high humidity conditions, we controlled the order of the resultant colloidal crystal films. The domain size of the AB₂ binary crystalline phase increased with an excess of small (B) particles and a very slow evaporation rate below 45 °C, with the best results obtained at 30° and 35 °C.

Approaches to self-assembly of colloidal monolayers: A guide for nanotechnologists

Self-assembly of quasi-spherical colloidal particles in two-dimensional (2D) arrangements is essential for a wide range of applications from optoelectronics to surface engineering, from chemical and biological sensing to light harvesting and environmental remediation. Several self-assembly approaches have flourished throughout the years, with specific features in terms of complexity of the implementation, sensitivity to process parameters, characteristics of the final colloidal assembly. Selecting the proper method for a given application amidst the vast literature in this field can be a challenging task. In this review, we present an extensive classification and comparison of the different techniques adopted for 2D self-assembly in order to provide useful guidelines for scientists approaching this field. After an overview of the main applications of 2D colloidal assemblies, we describe the main mechanisms underlying their formation and introduce the mathematical tools commonly used to analyse their final morphology. Subsequently, we examine in detail each class of self-assembly techniques, with an explanation of the physical processes intervening in crystallization and a thorough investigation of the technical peculiarities of the different practical implementations. We point out the specific characteristics of the set-ups and apparatuses developed for self-assembly in terms of complexity, requirements, reproducibility, robustness, sensitivity to process parameters and morphology of the final colloidal pattern. Such an analysis will help the reader to individuate more easily the approach more suitable for a given application and will draw the attention towards the importance of the details of each implementation for the final results.

Colloidal assembly and 3D shaping by dielectrophoretic confinement

For decades, scientists and engineers have strived to design means of assembling colloids into ordered structures. By now, the literature is quite peppered with reports of colloidal assemblies. However, the available methods can assemble only a narrow range of structures or are applicable to specific types of colloids. There are still only few generic methods that would lead to arbitrary colloidal arrays or would shape colloidal assemblies into predesigned structures. Here, we first discuss in detail how to spatially control the assembly and crystallization of colloids through the balance of dielectrophoretic and dipolar forces. Furthermore, we demonstrate how to flexibly program and shape arrays of 3D microstructures that can be permanently affixed by in situ UV polymerization and calcination by using two facing similar or distinct micro-fabricated electrodes.

Periodically microstructured composite films made by electric- and magnetic-directed colloidal assembly

Living organisms often combine soft and hard anisotropic building blocks to fabricate composite materials with complex microstructures and outstanding mechanical properties. An optimum design and assembly of the anisotropic components reinforces the material in specific directions and sites to best accommodate multidirectional external loads. Here, we fabricate composite films with periodic modulation of the soft-hard microstructure by simultaneously using electric and magnetic fields. We exploit forefront directed-assembly approaches to realize highly demanded material microstructural designs and showcase a unique example of how one can bridge colloidal sciences and composite technology to fabricate next-generation advanced structural materials. In the proof-of-concept experiments, electric fields are used to dictate the position of the anisotropic particles through dielectrophoresis, whereas a rotating magnetic field is used to control the orientation of the particles. By using such unprecedented control over the colloidal assembly process, we managed to fabricate ordered composite microstructures with up to 2.3-fold enhancement in wear resistance and unusual site-specific hardness that can be locally modulated by a factor of up to 2.5.

Controlling colloidal particles with electric fields

In this instructional review, we discuss how to control individual colloids and ensembles of colloids using electric fields. We provide background on the electrokinetic transport mechanisms and kT-scale equilibrium colloidal interactions that enable such control. We also describe the experimental configurations, microscopy methods, image analyses, and material systems for which these mechanisms have been successfully employed. Methods are presented for creating various structures including colloidal chains, quasi-2D colloidal crystals, and 3D colloidal crystals. We also describe electric-field-mediated feedback control of the colloidal crystal size as well as colloidal crystal assembly and disassembly. Finally, we discuss future extensions of these methods that aim to incorporate accurate colloidal crystallization dynamic models into electric-field-mediated feedback control to allow rapid assembly, disassembly, and repair of defect-free colloidal structures.

Analysis of the field-assisted permanent assembly of oppositely charged particles

We characterize experimentally and analyze analytically a novel electric-field-assisted process for the assembly of permanent chains of oppositely charged microparticles in an aqueous environment. Long chains of oppositely charged particles are rapidly formed when an external electric field is applied and break up into permanent linear fragments upon switching off the field. The resulting secondary chains are stabilized by attractive electrostatic and van der Waals interactions between the particles. We find that the length of the permanent chains is strongly dependent on the relative size (microsphere diameter D) of small and large particles and can be tuned by varying the particle size ratio s = Dsm/Dlg and particle number ratio r = Nsm/Nlg. Three latex microsphere systems of different particle size ratio, s = 0.9, 0.45, and 0.225, were characterized at different particle number ratios r by determining experimentally the length distribution of the permanent chains. The results are compared with statistical models based on a one-step or two-step process of forming the primary chains. We find that the one-step model is applicable to the system of similarly sized particles (s = 0.9) and the two-step chaining model is applicable to the system of dissimilarly sized particles (s = 0.225), where the large particles form chains first and the small ones serve as binders, which are later drawn in the junctions. Long permanent chains are formed only from particles of dissimilar size for which our model predicts a linear increase in the mean chain length with increasing r. On the basis of these results, we formulate a set of assembly rules for permanent colloidal chain formation by oppositely charged particles. The results make possible the precise large-scale formation of particle chains of any length, which can serve as components in new gels, biomaterials, and fluids with controlled rheology.

Dielectrophoretic coassembly of binary colloidal mixtures in AC electric fields

We report the novel use of dielectrophoresis (DEP) for fabricating a new class of composite structures composed of binary mixtures of micrometer-sized colloidal particles. Latex-latex and latex-yeast cells have been coassembled in a combinatorial manner into one- (1D) and two-dimensional (2D) architectures in spatially varying external alternating current (AC) electric fields using two different electrode geometries. The effects of voltage, frequency, particle size, particle concentration, and particle type are investigated in detail to determine how the relative polarizabilities of the particles can be tuned to influence the overall coassembly process. Our observations reveal key differences in the latex-latex and latex-yeast cell assembly behavior especially in the case of 2D structure formation arising mainly due to the intrinsically high polarizability and polydispersity of the cells. This study is useful for making a potpourri of new hybrid structures with advanced functionalities for photonic and biosensing applications.

Plasmonic hotspots of dynamically assembled nanoparticles in nanocapillaries: Towards a micro ribonucleic acid profiling platform

Plasmonic hot spots, generated by controlled 20-nm Au nanoparticle (NP) assembly, are shown to suppress fluorescent quenching effects of metal NPs, such that hair-pin FRET (Fluorescence resonance energy transfer) probes can achieve label-free ultra-sensitive quantification. The micron-sized assembly is a result of intense induced NP dipoles by focused electric fields through conic nanocapillaries. The efficient NP aggregate antenna and the voltage-tunable NP spacing for optimizing hot spot intensity endow ultra-sensitivity and large dynamic range (fM to pM). The large shear forces during assembly allow high selectivity (2-mismatch discrimination) and rapid detection (15 min) for a DNA mimic of microRNA.

Dielectrophoresis of lambda-DNA using 3D carbon electrodes

Carbon electrodes have recently been introduced as an alternative to metal electrodes and insulator structures for dielectrophoretic applications. Here, an experimental and theoretical study employing an array of 3D carbon electrodes contained in a microfluidic channel for the dielectrophoretic manipulation of DNA is presented. First evidence that carbon-electrode DEP can be used for the manipulation and trapping of biomolecules such as DNA is reported. In particular, the dielectrophoretic response of λ-DNA (48.5 kbp) under various frequencies and flow conditions necessary for retention of λ-DNA are studied. Negative DEP is observed at frequencies above 75 kHz and positive DEP is present in the range below 75 kHz and down to 5 kHz. We further implement a theoretical model to capture the experimental findings in sufficient detail. Our theoretical considerations based on reported scaling laws for linear and supercoiled DNA further suggest that carbon-electrode DEP devices could be employed in future analytical applications such as DNA preconcentration and fractionation.

Directed assembly of Janus particles under high frequency ac-electric fields: effects of medium conductivity and colloidal surface chemistry

The manipulation and assembly of polystyrene-based Janus particles of varied surface chemistry on one hemispherical particle surface under high frequency nonuniform ac-electric fields is examined experimentally by in situ microscopic observation. Strong effects of ac-field frequency, medium conductivity, and particle surface chemistry on the structure of Janus colloidal assembly are observed. At low medium conductivity, σ(m) from 0.0007 S/m to 0.0153 S/m, pearl chains of Janus particles are observed over the ac-frequency range from 25 kHz to 20 MHz, indicating the dielectrophoresis (DEP)-directed assembly. In contrast, the chaining of Janus particles is disrupted in a certain frequency range at high σ(m) from 0.0153 S/m to 0.116 S/m, suggesting the combining effects of both induced-charge electrophoresis (ICEP) and DEP. The critical transition frequency for the onset of the fractal aggregation at high σ(m) from 0.0153 S/m to 0.116 S/m is experimentally determined, showing a good agreement with the theoretically predicted upper ICEP frequency limit. Additionally, it is demonstrated that by using zwitterionic Janus particles, the assembled structure of Janus particles under ac-fields can be modified by the chemical coatings on each hemispherical surface of Janus particles.

AC electrokinetic templating of colloidal particle assemblies: effect of electrohydrodynamic flows

The use of spatially nonuniform electric fields for the contact-free colloidal particle assembly into ordered structures of various length scales is a research area of great interest. In the present work, numerical simulations are undertaken in order to advance our understanding of the physical mechanisms that govern this colloidal assembly process and their relation to the electric field characteristics and colloidal system properties. More specifically, the electric-field driven assembly of colloidal silica (d(p) = 0.32 and 2 μm) in DMSO, a near index matching fluid, is studied numerically over a range of voltages and concentration by means of a continuum thermodynamic approach. The equilibrium (u(f) = 0) and nonequilibrium (u(f) ≠ 0) cases were compared to determine whether fluid motion had an effect on the shape and size of assemblies. It was found that the nonequilibrium case was substantially different versus the equilibrium case, in both size and shape of the assembled structure. This dependence was related to the relative magnitudes of the electric-field driven convective motion of particles versus the fluid velocity. Fluid velocity magnitudes on the order of mm/s were predicted for 0.32 μm particles at 1% initial solids content, and the induced fluid velocity was found to be larger at the same voltage/initial volume fraction as the particle size decreased, owing to a larger contribution from entropic forces.

Review article-dielectrophoresis: status of the theory, technology, and applications

A review is presented of the present status of the theory, the developed technology and the current applications of dielectrophoresis (DEP). Over the past 10 years around 2000 publications have addressed these three aspects, and current trends suggest that the theory and technology have matured sufficiently for most effort to now be directed towards applying DEP to unmet needs in such areas as biosensors, cell therapeutics, drug discovery, medical diagnostics, microfluidics, nanoassembly, and particle filtration. The dipole approximation to describe the DEP force acting on a particle subjected to a nonuniform electric field has evolved to include multipole contributions, the perturbing effects arising from interactions with other cells and boundary surfaces, and the influence of electrical double-layer polarizations that must be considered for nanoparticles. Theoretical modelling of the electric field gradients generated by different electrode designs has also reached an advanced state. Advances in the technology include the development of sophisticated electrode designs, along with the introduction of new materials (e.g., silicone polymers, dry film resist) and methods for fabricating the electrodes and microfluidics of DEP devices (photo and electron beam lithography, laser ablation, thin film techniques, CMOS technology). Around three-quarters of the 300 or so scientific publications now being published each year on DEP are directed towards practical applications, and this is matched with an increasing number of patent applications. A summary of the US patents granted since January 2005 is given, along with an outline of the small number of perceived industrial applications (e.g., mineral separation, micropolishing, manipulation and dispensing of fluid droplets, manipulation and assembly of micro components). The technology has also advanced sufficiently for DEP to be used as a tool to manipulate nanoparticles (e.g., carbon nanotubes, nano wires, gold and metal oxide nanoparticles) for the fabrication of devices and sensors. Most efforts are now being directed towards biomedical applications, such as the spatial manipulation and selective separationenrichment of target cells or bacteria, high-throughput molecular screening, biosensors, immunoassays, and the artificial engineering of three-dimensional cell constructs. DEP is able to manipulate and sort cells without the need for biochemical labels or other bioengineered tags, and without contact to any surfaces. This opens up potentially important applications of DEP as a tool to address an unmet need in stem cell research and therapy.

On-chip dielectrophoretic coassembly of live cells and particles into responsive biomaterials

We report how live cells and functionalized colloidal particles can be coassembled into a variety of freely suspended bioactive structures using dielectrophoresis on a chip. Alternating electric fields were applied to dilute suspensions of yeast (S. cerevisiae) and NIH/3T3 mouse fibroblast cells to yield 1D chains and 2D arrays. The effects of voltage, frequency, pH, electrolyte concentration, cell concentration, and particle size on the assembly process were investigated in detail. Numerical simulations of the field intensity and energy allow the capture of the dynamics of cell-cell and cell-particle assembly. The simulation results illustrate that the electric field draws the functionalized synthetic particles between the cells and enables the formation of permanent chains and monolayer membranes composed of alternating cells and particles. The cell structures were bound into permanent structures by different types of functionalized synthetic particles and ligands that attached to the cells through biospecific or electrostatic interactions. The technique allowed the fabrication of magnetically responsive biomaterials that could be manipulated and transported into and out of the microchambers where they were formed.

Direct measurements of the frequency-dependent dielectrophoresis force

Dielectrophoresis (DEP), the phenomenon of directed motion of electrically polarizable particles in a nonuniform electric field, is promising for applications in biochemical separation and filtration. For colloidal particles in suspension, the relaxation of the ionic species in the shear layer gives rise to a frequency-dependent, bidirectional DEP force in the radio frequency range. However, quantification methods of the DEP force on individual particles with the pico-Newton resolution required for the development of theories and design of device applications are lacking. We report the use of optical tweezers as a force sensor and a lock-in phase-sensitive technique for analysis of the particle motion in an amplitude modulated DEP force. The coherent detection and sensing scheme yielded not only unprecedented sensitivity for DEP force measurements, but also provided a selectivity that clearly distinguishes the pure DEP force from all the other forces in the system, including electrophoresis, electro-osmosis, heat-induced convection, and Brownian forces, all of which can hamper accurate measurements through other existing methods. Using optical tweezers-based force transducers already developed in our laboratory, we have results that quantify the frequency-dependent DEP force and the crossover frequency of individual particles with this new experimental method.