Poly(ethylene glycol) monolayer formation and stability on gold and silicon nitride substrates

Advances in Bioreceptor Layer Engineering in Nanomaterial-based Sensing of Pseudomonas Aeruginosa and its Metabolites

Pseudomonas aeruginosa is a pathogen that infects wounds and burns and causes severe infections in immunocompromised humans. The high virulence, the rise of antibiotic-resistant strains, and the easy transmissibility of P. aeruginosa necessitate its fast detection and control. The gold standard for detecting P. aeruginosa, the plate culture method, though reliable, takes several days to complete. Therefore, developing accurate, rapid, and easy-to-use diagnostic tools for P. aeruginosa is highly desirable. Nanomaterial-based biosensors are at the forefront of detecting P. aeruginosa and its secondary metabolites. This review summarises the biorecognition elements, biomarkers, immobilisation strategies, and current state-of-the-art biosensors for P. aeruginosa. The review highlights the underlying principles of bioreceptor layer engineering and the design of optical, electrochemical, mass-based, and thermal biosensors based on nanomaterials. The advantages and disadvantages of these biosensors and their future point-of-care applications are also discussed. This review outlines significant advancements in biosensors and sensors for detecting P. aeruginosa and its metabolites. Research efforts have identified biorecognition elements specific and selective towards P. aeruginosa. The stability, ease of preparation, cost-effectiveness, and integration of these biorecognition elements onto transducers are pivotal for their application in biosensors and sensors. At the same time, when developing sensors for clinically significant analytes such as P. aeruginosa, virulence factors need to be addressed, such as the sensor's sensitivity, reliability, and response time in samples obtained from patients. The point-of-care applicability of the developed sensor may be an added advantage since it enables onsite determination. In this context, optical methods developed for P. aeruginosa offer promising potential.

Long-Term In Vivo Molecular Monitoring Using Aptamer-Graphene Microtransistors

Long-term, real-time molecular monitoring in complex biological environments is critical for our ability to understand, prevent, diagnose, and manage human diseases. Aptamer-based electrochemical biosensors possess the promise due to their generalizability and a high degree of selectivity. Nevertheless, the operation of existing aptamer-based biosensors in vivo is limited to a few hours. Here, we report a first-generation long-term in vivo molecular monitoring platform, named aptamer-graphene microtransistors (AGMs). The AGM incorporates a layer of pyrene-(polyethylene glycol)5-alcohol and DNase inhibitor-doped polyacrylamide hydrogel coating to reduce biofouling and aptamer degradation. As a demonstration of function and generalizability, the AGM achieves the detection of biomolecules such as dopamine and serotonin in undiluted whole blood at 37 °C for 11 days. Furthermore, the AGM successfully captures optically evoked dopamine release in vivo in mice for over one week and demonstrates the capability to monitor behaviorally-induced endogenous dopamine release even after eight days of implantation in freely moving mice. The results reported in this work establish the potential for chronic aptamer-based molecular monitoring platforms, and thus serve as a new benchmark for molecular monitoring using aptamer-based technology.

Surface immobilization strategies for the development of electrochemical nucleic acid sensors

Following the recent pandemic and with the emergence of cell-free nucleic acids in liquid biopsies as promising biomarkers for a broad range of pathologies, there is an increasing demand for a new generation of nucleic acid tests, with a particular focus on cost-effective, highly sensitive and specific biosensors. Easily miniaturized electrochemical sensors show the greatest promise and most typically rely on the chemical functionalization of conductive materials or electrodes with sequence-specific hybridization probes made of standard oligonucleotides (DNA or RNA) or synthetic analogues (e.g. Peptide Nucleic Acids or PNAs). The robustness of such sensors is mostly influenced by the ability to control the density and orientation of the probe at the surface of the electrode, making the chemistry used for this immobilization a key parameter. This exhaustive review will cover the various strategies to immobilize nucleic acid probes onto different solid electrode materials. Both physical and chemical immobilization techniques will be presented. Their applicability to specific electrode materials and surfaces will also be discussed as well as strategies for passivation of the electrode surface as a way of preventing electrode fouling and reducing nonspecific binding.

Multispectral Localized Surface Plasmon Resonance (msLSPR) Reveals and Overcomes Spectral and Sensing Heterogeneities of Single Gold Nanoparticles

Metal nanoparticles can be sensitive molecular sensors due to enhanced absorption and scattering of light near a localized surface plasmon resonance (LSPR). Variations in both intrinsic properties such as the geometry and extrinsic properties such as the environment can cause heterogeneity in nanoparticle LSPR and impact the overall sensing responses. To date, however, few studies have examined LSPR and sensing heterogeneities, due to technical challenges in obtaining the full LSPR spectra of individual nanoparticles in dynamic assays. Here, we report multispectral LSPR (msLSPR), a wide-field imaging technique for real-time spectral monitoring of light scattering from individual nanoparticles across the whole field of view (FOV) at ∼0.5 nm spectral and ∼100 ms temporal resolutions. Using msLSPR, we studied the spectral and sensing properties of gold nanoparticles commonly used in LSPR assays, including spheres, rods, and bipyramids. Complemented with electron microscopy imaging, msLSPR analysis revealed that all classes of gold nanoparticles exhibited variations in LSPR peak wavelengths that largely paralleled variations in morphology. Compared with the rods and spheres, gold nanobipyramids exhibited both more uniform and stronger sensing responses as long as the bipyramids are structurally intact. Simulations incorporating the experimental LSPR properties demonstrate the negative impact of spectral heterogeneity on the overall performance of conventional, intensity-based LSPR assays and the ability of msLSPR in overcoming both particle heterogeneity and measurement noise. These results highlight the importance of spectral heterogeneity in LSPR-based sensors and the potential advantage of performing LSPR assays in the spectral domain.

Surface Passivation with a Perfluoroalkane Brush Improves the Precision of Single-Molecule Measurements

Single-molecule imaging is invaluable for investigating the heterogeneous behavior and interactions of biological molecules. However, an impediment to precise sampling of single molecules is the irreversible adsorption of components onto the surfaces of cover glasses. This causes continuous changes in the concentrations of different molecules dissolved or suspended in the aqueous phase from the moment a sample is dispensed, which will shift, over time, the position of chemical equilibria between monomeric and multimeric components. Interferometric scattering microscopy (iSCAT) is a technique in the single-molecule toolkit that has the capability to detect unlabeled proteins and protein complexes both as they adsorb onto and desorb from a glass surface. Here, we examine the reversible and irreversible interactions between a number of different proteins and glass via analysis of the adsorption and desorption of protein at the single-molecule level. Furthermore, we present a method for surface passivation that virtually eliminates irreversible adsorption while still ensuring the residence time of molecules on surfaces is sufficient for detection of adsorption by iSCAT. By grafting high-density perfluoroalkane brushes on cover-glass surfaces, we observe approximately equal numbers of adsorption and desorption events for proteins at the measurement surface (±1%). The fluorous-aqueous interface also prevents the kinetic trapping of protein complexes and assists in establishing a thermodynamic equilibrium between monomeric and multimeric components. This surface passivation approach is valuable for in vitro single-molecule experiments using iSCAT microscopy because it allows for continuous monitoring of adsorption and desorption of protein without either a decline in detection events or a change in sample composition due to the irreversible binding of protein to surfaces.

Anti-Colonization Effect of Au Surfaces with Self-Assembled Molecular Monolayers Functionalized with Antimicrobial Peptides on S. epidermidis

Medical devices with an effective anti-colonization surface are important tools for combatting healthcare-associated infections. Here, we investigated the anti-colonization efficacy of antimicrobial peptides covalently attached to a gold model surface. The gold surface was modified by a self-assembled polyethylene glycol monolayer with an acetylene terminus. The peptides were covalently connected to the surface through a copper-catalyzed [3 + 2] azide-acetylene coupling (CuAAC). The anti-colonization efficacy of the surfaces varied as a function of the antimicrobial activity of the peptides, and very effective surfaces could be prepared with a 6 log unit reduction in bacterial colonization.

Waveguide Enhanced Raman Spectroscopy for Biosensing: A Review

Waveguide enhanced Raman spectroscopy (WERS) utilizes simple, robust, high-index contrast dielectric waveguides to generate a strong evanescent field, through which laser light interacts with analytes residing on the surface of the waveguide. It offers a powerful tool for the direct identification and reproducible quantification of biochemical species and an alternative to surface enhanced Raman spectroscopy (SERS) without reliance on fragile noble metal nanostructures. The advent of low-cost laser diodes, compact spectrometers, and recent progress in material engineering, nanofabrication techniques, and software modeling tools have made realizing portable and cheap WERS Raman systems with high sensitivity a realistic possibility. This review highlights the latest progress in WERS technology and summarizes recent demonstrations and applications. Following an introduction to the fundamentals of WERS, the theoretical framework that underpins the WERS principles is presented. The main WERS design considerations are then discussed, and a review of the available approaches for the modification of waveguide surfaces for the attachment of different biorecognition elements is provided. The review concludes by discussing and contrasting the performance of recent WERS implementations, thereby providing a future roadmap of WERS technology where the key opportunities and challenges are highlighted.

Heat Conduction Performance over a Poly(ethylene glycol) Self-Assembled Monolayer/Water Interface: A Molecular Dynamics Study

This study examined the interfacial heat condition between a poly(ethylene glycol) (PEG) self-assembled monolayer (SAM) and water using molecular dynamics simulation. It was found that the PEG SAM has higher thermal boundary conductance (TBC) than the traditionally used alkane-based SAM. The TBC conditionally varied with the length of the PEG molecules, where interfacial thermal resistance was a key factor. Our results reveal that the TBC of the PEG SAM/water interface is greatly influenced by its structural properties rather than the matching of vibrational properties between the SAM terminal and water. The structural analysis shows that the water structure around the terminal oxygen atom of the SAM plays a vital role in controlling the TBC. In this study, the concept of free volume has also been exploited, and the result suggests that the reduction of the free volume fraction accommodates a higher TBC. The model was precisely validated against experimental data by calculating the tilt angle and dihedral angle of the PEG SAM, the persistence length of the PEG chain in the water medium, and the sulfur position of the PEG SAM headgroup on the gold surface using quantitative scanning transmission electron microscopy image simulation.

Perfluorinated compounds are not necessary: pegylated organosilanes can endow good water sliding/removal properties

From a viewpoint of reducing the burden on both human health and the environment, alternative surface modification techniques for preparing highly water-repellent surfaces without the use of environmentally damaging perfluorocarbons are highly desirable. Among them, the development of hydrophilic surfaces showing superior water sliding/removal properties has been scarcely reported. In this study, we have successfully demonstrated the fabrication of smooth, transparent, and hydrophilic pegylated organosilanes (PEG_n-Si, CH₃O-(C₂H₄O)_n-C₃H₆-Si(OCH₃)₃ where n = 3, 6-9, 9-12)-derived hybrid films showing excellent water sliding/removal properties using a simple sol-gel reaction of PEG_n-Si and tetraethoxysilane (TEOS, Si(OC₂H₅)₄). The final static/dynamic surface wetting properties of the samples were found to be significantly influenced by both the PEG chain length and their mixing ratios. The use of PEG_n-Si with the longest PEG chain (n = 9-12) was found to be effective for improving water sliding/removal properties. Small volume water droplets (5 μL) on the PEG_9-12-Si/TEOS hybrid film (static water contact angle (CA) of ∼40°) at a 90°-inclined surface could slide at an average speed of 3.4 mm/sec without pinning and tailing, which was about twice as fast as that on the PEG_6-9-Si/TEOS hybrid film surface (1.5 mm/sec, static water CA of ∼40°), in spite of having similar static hydrophilic nature.

Monodispersity of Poly(ethylene glycol) Matters for Low-Fouling Coatings

Poly(ethylene glycol) (PEG) is the most used hydrophilic polymer for low-fouling coatings to minimize nonspecific interactions. The PEG molecular weight or its length as well as surface density are typically considered as the main impacts on the control over low-fouling properties. However, the influence of PEG monodispersity on such investigations is typically ignored and rarely reported. Herein, we report the assembly of PEGylated coatings on planar surfaces and Au nanorods (AuNRs) using a series of monodisperse PEG (Mono-PEG) with exact molecular weights and commonly used polydisperse PEG (Poly-PEG) to investigate the effect of the PEG molecular weight and monodispersity on the low-fouling properties. Nonspecific interactions with proteins or cells on PEGylated planar surfaces can be significantly reduced when Mono-PEG with a molecular weight of 752 Da and above is used, while a higher average molecular weight of 2000 Da is required for Poly-PEG-modified surfaces. Cell association of PEGylated AuNRs further confirms that a low molecular weight of Mono-PEG is sufficient to achieve low-fouling properties. This study provides an insight and general guidance into the engineering of low-fouling surfaces by the appropriate choice based on the PEG monodispersity and/or molecular weights.

Multifaceted aspects of charge transfer

Charge transfer and charge transport are by far among the most important processes for sustaining life on Earth and for making our modern ways of living possible. Involving multiple electron-transfer steps, photosynthesis and cellular respiration have been principally responsible for managing the energy flow in the biosphere of our planet since the Great Oxygen Event. It is impossible to imagine living organisms without charge transport mediated by ion channels, or electron and proton transfer mediated by redox enzymes. Concurrently, transfer and transport of electrons and holes drive the functionalities of electronic and photonic devices that are intricate for our lives. While fueling advances in engineering, charge-transfer science has established itself as an important independent field, originating from physical chemistry and chemical physics, focusing on paradigms from biology, and gaining momentum from solar-energy research. Here, we review the fundamental concepts of charge transfer, and outline its core role in a broad range of unrelated fields, such as medicine, environmental science, catalysis, electronics and photonics. The ubiquitous nature of dipoles, for example, sets demands on deepening the understanding of how localized electric fields affect charge transfer. Charge-transfer electrets, thus, prove important for advancing the field and for interfacing fundamental science with engineering. Synergy between the vastly different aspects of charge-transfer science sets the stage for the broad global impacts that the advances in this field have.

Single particle detection of protein molecules using dark-field microscopy to avoid signals from nonspecific adsorption

A massively parallel single particle sensing method based on core-satellite formation of Au nanoparticles was introduced for the detection of interleukin 6 (IL-6). This method exploits the fact that the localized plasmon resonance (LSPR) of the plasmonic nanoparticles will change as a result of core-satellite formation, resulting in a change in the observed color. In this method, the hue (color) value of thousands of 67 nm Au nanoparticles immobilized on a glass coverslip surface is analyzed by a Matlab code before and after the addition of reporter nanoparticles containing IL-6 as target protein. The average hue shift as the result of core-satellite formation is used as the basis to detect small amount of proteins. This method enjoys two major advantages. First it is able to analyze the hue values of thousands of nanoparticles in parallel in less than a minute. Secondly the method is able to circumvent the effect of non-specific adsorption, a major issue in the field of biosensing.

Patterned Molecular Films of Alkanethiol and PLL-PEG on Gold-Silicate Interfaces: How to Add Functionalities while Retaining Effective Antifouling

Spatial control of surface functionalization and interactions is essential for microarray-based analysis. This study reports the fabrication of two-dimensional molecular films with site-specific functionalities, forming microarrays at discrete locations. Arrays of microsized gold disks were produced on a silicate membrane using microfabrication. On these arrays, orthogonal self-assembly of molecules was performed that can specifically bind to gold or silicate. The gold array elements were functionalized with a range of alkanethiols and the silicate with polymeric poly-l-lysine-grafted-poly(ethylene glycol) (PLL-PEG). The surface functionalization on the gold disk array and the surrounding substrate was characterized at each step using X-ray photoelectron spectroscopy (XPS) to show that alkanethiols are specifically attached to the gold. PLL-PEG was used to provide resistance against nonspecific protein and cell adsorption and attached exclusively to the silicate. The effectiveness of the surface chemistry was validated by the selective self-assembly of a gold nanoparticle monolayer array on the gold regions. In a more sophisticated example, selective adhesion of MCF-7 cells to anti-EpCAM antibody modified gold areas of the gold-silicate surface was demonstrated to give a cell microarray. This study provides a general approach to fabricate chemical patterns on silicon-based devices with the convergence of microfabrication and material-specific surface modification, which may be useful to expand the functionalities and potential applications for patterned biomolecular films. Importantly, the ability to pattern surfaces with different surface chemistries is not limited to planar surfaces using this orthogonal surface-coupling approach.

Origin of Enhanced Cyclability in Covalently Modified LiMn1.5Ni0.5O4 Cathodes

High-voltage lithium-ion cathode materials exhibit exceptional energy densities; however, rapid capacity fade during cell cycling prohibits their widespread utilization. Surface modification of cathode-active materials by organic self-assembled monolayers (SAMs) has emerged as an approach to improve the longevity of high-voltage electrodes; however, the surface chemistry at the electrode/electrolyte interphase and its dependence on monolayer structure remains unclear. Herein, we investigate the interplay between monolayer structure, electrochemical performance, and surface chemistry of high-voltage LiMn_1.5Ni_0.5O₄ (LMNO) electrodes by the application of silane-based SAMs of variable length and chemical composition. We demonstrate that the application of both hydrophobic and hydrophilic monolayers results in improved galvanostatic capacity retention relative to unmodified LMNO. The extent of this improvement is tied to the structure of the monolayer with fluorinated alkyl-silanes exhibiting the greatest overall capacity retention, above 96% after 100 charge/discharge cycles. Postmortem surface analysis reveals that the presence of the monolayer enhances the deposition of LiF at the electrode surface during cell cycling and that the total surface concentration correlates with the overall improvements in capacity retention. We propose that the enhanced deposition of highly insulating LiF increases the anodic stability of the interphase, contributing to the improved galvanostatic performance of modified electrodes. Moreover, this work demonstrates that the modification of the electrode surface by the selection of an appropriate monolayer is an effective approach to tune the properties and behavior of the electrode/electrolyte interphase formed during battery operation.

Lipid Bilayer-like Mixed Self-Assembled Monolayers with Strong Mobility and Clustering-Dependent Lectin Affinity

Glycans at the surface of cellular membranes modulate biological activity via multivalent association with extracellular messengers. The lack of tuneable simplified models mimicking this dynamic environment complicates basic studies of these phenomena. We here present a series of mixed reversible self-assembled monolayers (rSAMs) that addresses this deficiency. Mixed rSAMs were prepared in water by simple immersion of a negatively charged surface in a mixture of sialic acid- and hydroxy-terminated benzamidine amphiphiles. Surface compositions derived from infrared reflection-absorption spectroscopy (IRAS) and film thickness information (atomic force microscopy, ellipsometry) suggest the latter to be statistically incorporated in the monolayer. These surfaces' affinity for the lectin hemagglutinin revealed a strong dependence of the affinity on the presentation, density, and mobility of the sialic acid ligands. Hence, a spacer length of 4 ethylene glycol and a surface density of 15% resulted in a dissociation constant K_d,multi of 1.3 × 10^-13 M, on par with the best di- or tri-saccharide-based binders reported to date, whereas a density of 20% demonstrated complete resistance to hemagglutinin binding. These results correlated with ligand mobility measured by fluorescence recovery after photobleaching which showed a dramatic drop in the same interval. The results have a direct bearing on biological cell surface multivalent recognition involving lipid bilayers and may guide the design of model surfaces and sensors for both fundamental and applied studies.

Non-Specific Adsorption Reduction Methods in Biosensing

Non-specific adsorption (NSA) is a persistent problem that negatively affects biosensors, decreasing sensitivity, specificity, and reproducibility. Passive and active removal methods exist to remedy this issue, by coating the surface or generating surface forces to shear away weakly adhered biomolecules, respectively. However, many surface coatings are not compatible or effective for sensing, and thus active removal methods have been developed to combat this phenomenon. This review aims to provide an overview of methods of NSA reduction in biosensing, focusing on the shift from passive methods to active methods in the past decade. Attention is focused on protein NSA, due to their common use in biosensing for biomarker diagnostics. To our knowledge, this is the first review to comprehensively discuss active NSA removal methods. Lastly, the challenges and future perspectives of NSA reduction in biosensing are discussed.

Specific drug delivery efficiently induced human breast tumor regression using a lipoplex by non-covalent association with anti-tumor antibodies

Background

A cationic liposome-PEG-PEI complex (LPPC) was employed as a carrier for achieving targeted delivery of drug to human epidermal growth factor receptor-2 (HER2/neu)-expressing breast cancer cells. LPPC can be easily loaded with an anti-tumor drug and non-covalently associated with an anti-tumor antibody such as Herceptin that is clinically used to rapidly form immunoparticles within 1 h.

Results

Drug-loaded LPPC have an average size about 250 nm and a zeta potential of about 40 mV. Herceptin was complexed onto surface of the LPPC to form the drug/LPPC/Herceptin complexes. The size of curcumin/LPPC/Herceptin complexes were 280 nm and the zeta potentials were about 23 mV. Targeting ability of this delivery system was demonstrated through specific binding on surface of cells and IVIS images in vivo, which showed specific binding in HER2-positive SKBR3 cells as compared to HER2-negative Hs578T cells. Only the drug/LPPC/Herceptin complexes displayed dramatically increased the cytotoxic activity in cancer cells. Both in vitro and in vivo results indicated that Herceptin adsorbed on LPPC directed the immunocomplex towards HER2/neu-positive cells but not HER2/neu-negative cells. The complexes with either component (curcumin or doxorubicin) used in the LPPC-delivery system provided a better therapeutic efficacy compared to the drug treatment alone and other treatment groups, including clinical dosages of Herceptin and LipoDox, in a xenografted model.

Conclusions

LPPC displays important clinical implications by easily introducing a specific targeting characteristic to drugs utilized for breast cancer therapy.

Electronic supplementary material

The online version of this article (10.1186/s12951-019-0457-3) contains supplementary material, which is available to authorized users.

Through a Window, Brightly: A Review of Selected Nanofabricated Thin-Film Platforms for Spectroscopy, Imaging, and Detection

We present a review of the use of selected nanofabricated thin films to deliver a host of capabilities and insights spanning bioanalytical and biophysical chemistry, materials science, and fundamental molecular-level research. We discuss approaches where thin films have been vital, enabling experimental studies using a variety of optical spectroscopies across the visible and infrared spectral range, electron microscopies, and related techniques such as electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and single molecule sensing. We anchor this broad discussion by highlighting two particularly exciting exemplars: a thin-walled nanofluidic sample cell concept that has advanced the discovery horizons of ultrafast spectroscopy and of electron microscopy investigations of in-liquid samples; and a unique class of thin-film-based nanofluidic devices, designed around a nanopore, with expansive prospects for single molecule sensing. Free-standing, low-stress silicon nitride membranes are a canonical structural element for these applications, and we elucidate the fabrication and resulting features-including mechanical stability, optical properties, X-ray and electron scattering properties, and chemical nature-of this material in this format. We also outline design and performance principles and include a discussion of underlying material preparations and properties suitable for understanding the use of alternative thin-film materials such as graphene.

Silicon Nitride Thin Films for Nanofluidic Device Fabrication

Silicon nitride is a ubiquitous and well-established nanofabrication material with a host of favourable properties for creating nanofluidic devices with a range of compelling designs that offer extraordinary discovery potential. Nanochannels formed between two thin silicon nitride windows can open up vistas for exploration by freeing transmission electron microscopy to interrogate static structures and structural dynamics in liquid-based samples. Nanopores present a strikingly different architecture—nanofluidic channels through a silicon nitride membrane—and are one of the most promising tools to emerge in biophysics and bioanalysis, offering outstanding capabilities for single molecule sensing. The constrained environments in such nanofluidic devices make surface chemistry a vital design and performance consideration. Silicon nitride has a rich and complex surface chemistry that, while too often formidable, can be tamed with new, robust surface functionalization approaches. We will explore how a simple structural element—a ∼100 nm-thick silicon nitride window—can be used to fabricate devices to wrest unprecedented insights from the nanoscale world. We will detail the intricacies of native silicon nitride surface chemistry, present surface chemical modification routes that leverage the richness of available surface moieties, and examine the effect of engineered chemical surface functionality on nanofluidic device character and performance.

Surface modification with zwitterionic cysteine betaine for nanoshell-assisted near-infrared plasmonic hyperthermia

Nanoparticles decorated with biocompatible coatings have received considerable attention in recent years for their potential biomedical applications. However, the desirable properties of nanoparticles for in vivo uses, such as colloidal stability, biodistribution, and pharmacokinetics, require further research. In this work, we report a bio-derived zwitterionic surface ligand, cysteine betaine (Cys-b) for the modification of hollow gold-silver nanoshells, giving rise to hyperthermia applications. Cys-b coatings on planar substrates and nanoshells were compared to conventional (11-mercaptoundecyl)tri(ethylene glycol) (OEG-thiol) to investigate their effects on the fouling resistance, colloidal stability, environmental tolerance, and photothermal properties. The results found that Cys-b and OEG-thiol coatings exhibited comparable antifouling properties against bacteria of gram-negative Pseudomonas aeruginosa (P. aeruginosa) and gram-positive Staphylococcus epidermidis (S. epidermidis), NIH-3T3 fibroblasts, and bovine serum albumin. However, when the modified nanoshells were suspended at a temperature of 50°C in aqueous 3M NaCl solutions, shifts in the extinction maximum of the OEG-capped nanoshells with time were observed, while the corresponding spectra of nanoshells capped with Cys-b generally remained unchanged. In addition, when the nanoshells were continuously exposed to NIR irradiation, the temperature of the solution containing nanoshells capped with Cys-b increased to a plateau of 54°C, while that of the OEG-capped nanoshells gradually decreased after reaching a peak temperature. Accordingly, the Cys-b nanoshells were conjugated with anti-HER2 antibodies for targeted delivery to HER2-positive MDA-MB-453 breast cancer cells for hyperthermia treatment. The results showed the selective delivery and effective photothermal cell ablation with the antibody-conjugated Cys-b nanoshells. Therefore, this work demonstrated the promise of bio-derived zwitterionic Cys-b as a stable and biocompatible surface coating for materials in nanomedicine.

Biocompatibility and drug release behavior of scaffolds prepared by coaxial electrospinning of poly(butylene succinate) and polyethylene glycol

Scaffolds constituted by electrospun microfibers of poly(ethylene glycol) (PEG) and poly(butylene succinate) (PBS) were studied. Specifically, coaxial microfibers having different core-shell distributions and compositions were considered as well as uniaxial micro/nanofibers prepared from mixtures of both polymers. Processing conditions were optimized for all geometries and compositions and resulting morphologies (i.e. diameter and surface texture) characterized by scanning electron microscopy. Chemical composition, molecular interactions and thermal properties were evaluated by FTIR, NMR, XPS and differential scanning calorimetry. The PEG component of electrospun fibers could be solubilized by immersion of scaffolds in aqueous medium, giving rise to high porosity and hydrophobic samples. Nevertheless, a small amount of PEG was retained in the PBS matrix, suggesting some degree of mixing. Solubilization was slightly dependent on fiber structure; specifically, the distribution of PEG in the core or shell of coaxial fibers led to higher or lower retention levels, respectively. Scaffolds could be effectively loaded with hydrophobic drugs having antibacterial and anticarcinogenic activities like triclosan and curcumin, respectively. Their release was highly dependent on their chemical structure and medium composition. Thus, low and high release rates were observed in phosphate buffer saline (SS) and SS/ethanol (30:70 v/v), respectively. Slight differences in the release of triclosan were found depending on fiber distribution and composition. Antibacterial activity and biocompatibility were evaluated for both loaded and unloaded scaffolds.

Quantum-chemical analysis of hexagonal crystalline monolayers of ethoxylated nonionic surfactants at the air/water interface

In the framework of the quantum chemical semiempirical PM3 method the monolayers of the monoethoxylated normal alcohols CnH2n+1OCH2CH2OH with n = 6-16 (CnE1) at the air/water interface are described. The optimized structures of small clusters (dimers, trimers, tetramers, pentamers, hexamers and heptamers) comprising the hexagonal monolayer are obtained. For these aggregates thermodynamic parameters of formation and clusterization are calculated. The correlation dependencies of the clusterization enthalpy, entropy and Gibbs energy on the number of CHHC interactions and interactions between the functional groups realized in the cluster are obtained on the basis of calculated data. The calculated parameters of the hexagonal monolayer unit cell are: a = 4.02 Å; b = 7.94 Å, t = 4°, close to those for an aliphatic alcohol monolayer according to GIXD experiments: a = 5.0 Å; b = 7.5 Å, t = 0-9°. Spontaneous clusterization of monoethoxylated alcohols at the air/water interface under standard conditions is shown to be possible for molecules possessing more than 14 carbon atoms in the alkyl chain, in good agreement with the characteristics of the surface pressure-molecular area (π-A) isotherms. It is found that addition of the -O-CH2-CH2- unit to the hydrophilic part of aliphatic alcohols results in a shift of their spontaneous clusterization threshold to that of the compounds with hydrocarbon chains 3 methylene units longer. The temperature effect of CnE1 is assessed. It corresponds to the spontaneous clusterization temperature decrease of 10-20 K per two methylene units taken from the alkyl chain in agreement with experimental data. The comparison of clusterization Gibbs energy dependencies for small aggregates of CnE1 confirms the experimental fact that the crystalline monolayers are formed by preferential aggregation of trimers.

Quantitative mechanical analysis of thin compressible polymer monolayers on oxide surfaces

A clear understanding of the mechanical behavior of nanometer thick films on nanostructures, as well as developing versatile approaches to characterize their mechanical properties, are of great importance and may serve as the foundation for understanding and controlling molecular interactions at the interface of nanostructures. Here we report on the synthesis of thin, compressible polyethylene glycol (PEG) monolayers with a wet thickness of <20 nm on tin dioxide (SnO2) nanofibers through silane-based chemistries. Nanomechanical properties of such thin PEG films were extensively investigated using atomic force microscopy (AFM). In addition, tip-sample interactions were carefully studied, with different AFM tip modifications (i.e., hydrophilic and hydrophobic) and in different ionic solutions. We find that the steric forces dominate the tip-sample interactions when the polymer film is immersed in solution with salt concentrations similar to biological media (e.g., 1x phosphate buffer solution), while van der Waals and electrostatic forces have minimal contributions. A Dimitriadis thin film polymer compression model shows that the linear elastic regime is reproducible in the initial 50% indentation of these films which have tunable Young's moduli ranging from 5 MPa for the low molecular weight films to 700 kPa for the high molecular weight PEG films. Results are compared with the same PEG films deposited on silicon substrates which helped quantify the structural properties and understand the relationship between the structural and the mechanical properties of PEG films on the SnO2 fibers.

Interface Immobilization Chemistry of cRGD-based Peptides Regulates Integrin Mediated Cell Adhesion

The interaction of specific surface receptors of the integrin family with different extracellular matrix-based ligands is of utmost importance for the cellular adhesion process. A ligand consists of an integrin-binding group, here cyclic RGDfX, a spacer molecule that lifts the integrin-binding group from the surface and a surface anchoring group. c(-RGDfX-) peptides are bound to gold nanoparticle structured surfaces via polyproline, polyethylene glycol or aminohexanoic acid containing spacers of different lengths. Although keeping the integrin-binding c(-RGDfX-) peptides constant for all compounds, changes of the ligand's spacer chemistry and length reveal significant differences in cell adhesion activation and focal adhesion formation. Polyproline-based peptides demonstrate improved cell adhesion kinetics and focal adhesion formation compared with common aminohexanoic acid or polyethylene glycol spacers. Binding activity can additionally be improved by applying ligands with two head groups, inducing a multimeric effect. This study gives insights into spacer-based differences in integrin-driven cell adhesion processes and remarkably highlights the polyproline-based spacers as suitable ligand-presenting templates for surface functionalization.

Cell patterning using a template of microstructured organosilane layer fabricated by vacuum ultraviolet light lithography

Micropatterning techniques have become increasingly important in cellular biology. Cell patterning is achieved by various methods. Photolithography is one of the most popular methods, and several light sources (e.g., excimer lasers and mercury lamps) are used for that purpose. Vacuum ultraviolet (VUV) light that can be produced by an excimer lamp is advantageous for fabricating material patterns, since it can decompose organic materials directly and efficiently without photoresist or photosensitive materials. Despite the advantages, applications of VUV light to pattern biological materials are few. We have investigated cell patterning by using a template of a microstructured organosilane layer fabricated by VUV lithography. We first made a template of a microstructured organosilane layer by VUV lithography. Cell adhesive materials (poly(d-lysine) and polyethyleneimine) were chemically immobilized on the organosilane template, producing a cell adhesive material pattern. Primary rat cardiac and neuronal cells were successfully patterned by culturing them on the pattern substrate. Long-term culturing was attained for up to two weeks for cardiac cells and two months for cortex cells. We have discussed the reproducibility of cell patterning and made suggestions to improve it.

Protein-repellent silicon nitride surfaces: UV-induced formation of oligoethylene oxide monolayers

The grafting of polymers and oligomers of ethylene oxide onto surfaces is widely used to prevent nonspecific adsorption of biological material on sensors and membrane surfaces. In this report, we show for the first time the robust covalent attachment of short oligoethylene oxide-terminated alkenes (CH(3)O(CH(2)CH(2)O)(3)(CH(2))(11)-(CH═CH(2)) [EO(3)] and CH(3)O(CH(2)CH(2)O)(6)(CH(2))(11)-(CH═CH(2)) [EO(6)]) from the reaction of alkenes onto silicon-rich silicon nitride surfaces at room temperature using UV light. Reflectometry is used to monitor in situ the nonspecific adsorption of bovine serum albumin (BSA) and fibrinogen (FIB) onto oligoethylene oxide coated silicon-rich silicon nitride surfaces (EO(n)-Si(x)N(4), x > 3) in comparison with plasma-oxidized silicon-rich silicon nitride surfaces (SiO(y)-Si(x)N(4)) and hexadecane-coated Si(x)N(4) surfaces (C(16)-Si(x)N(4)). A significant reduction in protein adsorption on EO(n)-Si(x)N(4) surfaces was achieved, adsorption onto EO(3)-Si(x)N(4) and EO(6)-Si(x)N(4) were 0.22 mg m(-2) and 0.08 mg m(-2), respectively. The performance of the obtained EO(3) and EO(6) layers is comparable to those of similar, highly protein-repellent monolayers formed on gold and silver surfaces. EO(6)-Si(x)N(4) surfaces prevented significantly the adsorption of BSA (0.08 mg m(-2)). Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray reflectivity and static water contact angle measurements were employed to characterize the modified surfaces. In addition, the stability of EO(6)-Si(x)N(4) surfaces in phosphate-buffered saline solution (PBS) and alkaline condition (pH 10) was studied. Prolonged exposure of the surfaces to PBS solution for 1 week or alkaline condition for 2 h resulted in only minor degradation of the ethylene oxide moieties and no oxidation of the Si(x)N(4) substrates was observed. Highly stable antifouling coatings on Si(x)N(4) surfaces significantly broaden the application potential of silicon nitride-coated microdevices, and in particular of microfabricated filtration membranes.

Real-time PMIRRAS studies of in situ growth of C11Eg6OMe on gold and immersion effects

We studied the growth of self-assembling monolayers of C(11)Eg(6)OMe on gold under aqueous conditions. With the help of polarisation modulation infrared reflection absorption spectroscopy (PMIRRAS) we monitored the evolution of characteristic absorption modes in the fingerprint region (1050-1500 cm(-1)) during the later stages of the growth of the SAM. We observed a change from rather amorphous structure with mixed all-trans and helical conformation to an ordered structure with predominantly helical structure over time. Changes of mode positions, intensities and broadness can be described by a single exponential. In addition, we investigated the effect of hydration for SAMs with different degrees of crystallinity. To that end, we compared their spectra at certain ordering levels in contact with aqueous solution with the corresponding spectra in air. SAMs with a highly ordered crystalline structure in air show the same structure under aqueous conditions. However, SAMs which are still crystalline in air, but less perfect, show rather amorphous spectral features under aqueous conditions indicating a strong interaction with water. This implies that the ability of water to penetrate the EG moiety strongly depends on its structure which in turn is related inter alia to the surface coverage. Since the interaction with water plays an important role in the prevention of unspecific adsorption on oligo(ethylene glycols) this is important for its application. Our experiments also underline the importance of the in situ analysis of the film structure.

Acute degradation of surface-bound unsaturated polyolefins in common solvents under ambient conditions

We describe the detachment of covalently grafted polybutadiene and polynorbornene chains, which were prepared by surface-initiated ring-opening metathesis polymerization (SiROMP), from Si/SiO2 substrates upon brief exposure to common solvents in air. Degradation and disappearance of grafted polybutadiene films after successive rinses with dichloromethane were monitored by ellipsometry. Changes in surface topography were analyzed by atomic force microscopy. The rapid auto-oxidation of allylic carbon-hydrogen bonds renders these thin films extremely susceptible to degradation under ambient conditions. Polymers in the tethered state suffer more acute degradation (on the time scale of seconds) compared to those dissolved in solution (not detectable after days). To prevent degradation, unsaturated polymers prepared by SiROMP and the subsequent conversion (of unsaturated groups) need to be carried out under inert atmosphere. For example, smooth polybutadiene thin films of approximately 100 A thickness were covalently attached to silicon substrates via SiROMP of cyclooctadiene in the vapor phase. Solvent rinsing to remove unreacted monomers and free oligomers/polymers was carried out prior to the conversion of double bonds to epoxide groups. When these steps were carried out under nitrogen, negligible film loss was observed, and surface topography of the thin films was preserved. Once the unsaturation was removed from polybutadiene, the epoxidized and hydroxylated polybutadiene films were stable toward solvent exposure in air.