Orthogonal enzymatic reactions for the assembly of proteins at electrode addresses

Electro-Biofabrication. Coupling Electrochemical and Biomolecular Methods to Create Functional Bio-Based Hydrogels

Twenty years ago, this journal published a review entitled "Biofabrication with Chitosan" based on the observations that (i) chitosan could be electrodeposited using low voltage electrical inputs (typically less than 5 V) and (ii) the enzyme tyrosinase could be used to graft proteins (via accessible tyrosine residues) to chitosan. Here, we provide a progress report on the coupling of electronic inputs with advanced biological methods for the fabrication of biopolymer-based hydrogel films. In many cases, the initial observations of chitosan's electrodeposition have been extended and generalized: mechanisms have been established for the electrodeposition of various other biological polymers (proteins and polysaccharides), and electrodeposition has been shown to allow the precise control of the hydrogel's emergent microstructure. In addition, the use of biotechnological methods to confer function has been extended from tyrosinase conjugation to the use of protein engineering to create genetically fused assembly tags (short sequences of accessible amino acid residues) that facilitate the attachment of function-conferring proteins to electrodeposited films using alternative enzymes (e.g., transglutaminase), metal chelation, and electrochemically induced oxidative mechanisms. Over these 20 years, the contributions from numerous groups have also identified exciting opportunities. First, electrochemistry provides unique capabilities to impose chemical and electrical cues that can induce assembly while controlling the emergent microstructure. Second, it is clear that the detailed mechanisms of biopolymer self-assembly (i.e., chitosan gel formation) are far more complex than anticipated, and this provides a rich opportunity both for fundamental inquiry and for the creation of high performance and sustainable material systems. Third, the mild conditions used for electrodeposition allow cells to be co-deposited for the fabrication of living materials. Finally, the applications have been expanded from biosensing and lab-on-a-chip systems to bioelectronic and medical materials. We suggest that electro-biofabrication is poised to emerge as an enabling additive manufacturing method especially suited for life science applications and to bridge communication between our biological and technological worlds.

A recent update on the use of microbial transglutaminase for the generation of biotherapeutics

The recent scientific progresses on the use of enzyme-mediated reactions in organic, non-aqueous and aqueous media have significantly supported the growing demand of new biotechnological and/or pharmacological products. Today, a plethora of microbial enzymes, used as biocatalysts, are available. Among these, microbial transglutaminases (MTGs) are broadly used for their ability to catalyse the formation of an isopeptide bond between the γ-amide group of glutamines and the ε-amino group of lysine. Due to their promiscuity towards primary amine-containing substrates and the more stringent specificity for glutamine-containing peptide sequences, several combined approaches can be tailored for different settings, making MTGs very attractive catalysts for generating protein-protein and protein small molecule's conjugates. The present review offers a recent update on the modifications attainable by MTG-catalysed bioreactions as reported between 2014 and 2019. In particular, we present a detailed and comparative overview on the MTG-based methods for proteins and antibodies engineering, with a particular outlook on the synthesis of homogeneous antibody-drug conjugates.

Biofabricating Functional Soft Matter Using Protein Engineering to Enable Enzymatic Assembly

Biology often provides the inspiration for functional soft matter, but biology can do more: it can provide the raw materials and mechanisms for hierarchical assembly. Biology uses polymers to perform various functions, and biologically derived polymers can serve as sustainable, self-assembling, and high-performance materials platforms for life-science applications. Biology employs enzymes for site-specific reactions that are used to both disassemble and assemble biopolymers both to and from component parts. By exploiting protein engineering methodologies, proteins can be modified to make them more susceptible to biology's native enzymatic activities. They can be engineered with fusion tags that provide (short sequences of amino acids at the C- and/or N- termini) that provide the accessible residues for the assembling enzymes to recognize and react with. This "biobased" fabrication not only allows biology's nanoscale components (i.e., proteins) to be engineered, but also provides the means to organize these components into the hierarchical structures that are prevalent in life.

Connecting Biology to Electronics: Molecular Communication via Redox Modality

Biology and electronics are both expert at for accessing, analyzing, and responding to information. Biology uses ions, small molecules, and macromolecules to receive, analyze, store, and transmit information, whereas electronic devices receive input in the form of electromagnetic radiation, process the information using electrons, and then transmit output as electromagnetic waves. Generating the capabilities to connect biology-electronic modalities offers exciting opportunities to shape the future of biosensors, point-of-care medicine, and wearable/implantable devices. Redox reactions offer unique opportunities for bio-device communication that spans the molecular modalities of biology and electrical modality of devices. Here, an approach to search for redox information through an interactive electrochemical probing that is analogous to sonar is adopted. The capabilities of this approach to access global chemical information as well as information of specific redox-active chemical entities are illustrated using recent examples. An example of the use of synthetic biology to recognize external molecular information, process this information through intracellular signal transduction pathways, and generate output responses that can be detected by electrical modalities is also provided. Finally, exciting results in the use of redox reactions to actuate biology are provided to illustrate that synthetic biology offers the potential to guide biological response through electrical cues.

Review of Electrochemically Triggered Macromolecular Film Buildup Processes and Their Biomedical Applications

Macromolecular coatings play an important role in many technological areas, ranging from the car industry to biosensors. Among the different coating technologies, electrochemically triggered processes are extremely powerful because they allow in particular spatial confinement of the film buildup up to the micrometer scale on microelectrodes. Here, we review the latest advances in the field of electrochemically triggered macromolecular film buildup processes performed in aqueous solutions. All these processes will be discussed and related to their several applications such as corrosion prevention, biosensors, antimicrobial coatings, drug-release, barrier properties and cell encapsulation. Special emphasis will be put on applications in the rapidly growing field of biosensors. Using polymers or proteins, the electrochemical buildup of the films can result from a local change of macromolecules solubility, self-assembly of polyelectrolytes through electrostatic/ionic interactions or covalent cross-linking between different macromolecules. The assembly process can be in one step or performed step-by-step based on an electrical trigger affecting directly the interacting macromolecules or generating ionic species.

Biomolecular engineering for nanobio/bionanotechnology

Biomolecular engineering can be used to purposefully manipulate biomolecules, such as peptides, proteins, nucleic acids and lipids, within the framework of the relations among their structures, functions and properties, as well as their applicability to such areas as developing novel biomaterials, biosensing, bioimaging, and clinical diagnostics and therapeutics. Nanotechnology can also be used to design and tune the sizes, shapes, properties and functionality of nanomaterials. As such, there are considerable overlaps between nanotechnology and biomolecular engineering, in that both are concerned with the structure and behavior of materials on the nanometer scale or smaller. Therefore, in combination with nanotechnology, biomolecular engineering is expected to open up new fields of nanobio/bionanotechnology and to contribute to the development of novel nanobiomaterials, nanobiodevices and nanobiosystems. This review highlights recent studies using engineered biological molecules (e.g., oligonucleotides, peptides, proteins, enzymes, polysaccharides, lipids, biological cofactors and ligands) combined with functional nanomaterials in nanobio/bionanotechnology applications, including therapeutics, diagnostics, biosensing, bioanalysis and biocatalysts. Furthermore, this review focuses on five areas of recent advances in biomolecular engineering: (a) nucleic acid engineering, (b) gene engineering, (c) protein engineering, (d) chemical and enzymatic conjugation technologies, and (e) linker engineering. Precisely engineered nanobiomaterials, nanobiodevices and nanobiosystems are anticipated to emerge as next-generation platforms for bioelectronics, biosensors, biocatalysts, molecular imaging modalities, biological actuators, and biomedical applications.

A Facile Two-Step Enzymatic Approach for Conjugating Proteins to Polysaccharide Chitosan at an Electrode Interface

Biological components are integrated with electronic devices to create microsystems with novel functions and chitosan, a naturally occurring biopolymer, can play a significant role as an interface material. Chitosan can be electrodeposited within confined geometries by cathodic charge and appropriate electrode design and proteins can be conjugated to chitosan. However, conjugation chemistries can be slow and chitosan, a polycationic polysaccharide, enables non-specific binding in biofabrication processes. There is a need to speed up the assembly process and reduce non-specific binding. Here, we have developed a two-step methodology that accelerates protein assembly, reduces background and increases specificity. We first "coated" the surface of chitosan with a Lys-Tyr-Lys (KYK) tripeptide in a slow step using tyrosinase-mediated conjugation chemistry and then conjugated proteins with C-terminal glutamine-tags to the saturating KYK tripeptide via transglutaminase. As a demonstration, we assembled a functioning two-enzyme bacterial metabolic pathway on an electrode chip. Results indicated a fivefold decrease in non-specific binding and an improvement in signal to noise ratio from 0.3 to 20. This transglutaminase-mediated approach is simple and quick, it requires no chemical reagents, no printing or stamping devices; it employs biological components and is biologically benign to the component parts-all characteristics of biofabricated devices.

Twigged streptavidin polymer as a scaffold for protein assembly

Protein assemblies are an emerging tool that is finding many biological and bioengineering applications. We here propose a method for the site-specific assembly of proteins on a twigged streptavidin (SA) polymer using streptavidin as a functional scaffold. SA was genetically appended with a G tag (sortase A recognition sequence) and a Y tag (HRP recognition sequence) on its N- and C-termini, respectively, to provide G-SA-Y. G-SA-Y was polymerized using HPR-mediated tyrosine coupling, then fluorescent proteins were immobilized on the polymer by biotin-SA affinity and sortase A-mediated ligation. Fluorescence measurements showed that the proteins were immobilized in close proximity to each other. Hydrolyzing enzymes were also functionally assembled on the G-SA-Y polymer. The site-specific assembly of proteins on twigged SA polymer may find new applications in various biological and bioengineering fields.

Functionalizing Soft Matter for Molecular Communication

The information age was enabled by advances in microfabrication and communication theory that allowed information to be processed by electrons and transmitted by electromagnetic radiation. Despite immense capabilities, microelectronics has limited abilities to access and participate in the molecular-based communication that characterizes our biological world. Here, we use biological materials and methods to create components and fabricate devices to perform simple molecular communication functions based on bacterial quorum sensing (QS). Components were created by protein engineering to generate a multidomain fusion protein capable of sending a molecular QS signal, and by synthetic biology to engineer E. coli to receive and report this QS signal. The device matrix was formed using stimuli-responsive hydrogel-forming biopolymers (alginate and gelatin). Assembly of the components within the device matrix was achieved by physically entrapping the cell-based components, and covalently conjugating the protein-based components using the enzyme microbial transglutaminase. We demonstrate simple devices that can send or receive a molecular QS signal to/from the surrounding medium, and a two-component device in which one component generates the signal (i.e., issues a command) that is acted upon by the second component. These studies illustrate the broad potential of biofabrication to generate molecular communication devices.

Transglutaminase-mediated in situ hybridization (TransISH) system: a new methodology for simplified mRNA detection

Detection and localization of specific DNA or RNA sequences in cells and tissues are of great importance for biological research, diagnosis, and environmental monitoring. However, the most common procedure for in situ hybridization employs laborious immunostaining techniques. In the present study, we report proof-of-concept for a new RNA-enzyme conjugated probe for the detection of mRNA on tissue sections with a simple procedure. An RNA probe modified with a specific dipeptide substrate of transglutaminase was prepared. Alkaline phosphatase was then covalently and site-specifically combined to the dipeptide-labeled RNA using microbial transglutaminase. The new RNA probe labeled with alkaline phosphatase was validated by in situ hybridization (ISH) and proved to be a sensitive and sequence specific probe for mRNA detection in tissues. The new transglutaminase-mediated ISH (TransISH) strategy is free from antigen-antibody reaction, leads to one-step signal amplification after hybridization, and thus will be widely applicable for highly sensitive nucleic acid detection.

Bridging the bio-electronic interface with biofabrication

Advancements in lab-on-a-chip technology promise to revolutionize both research and medicine through lower costs, better sensitivity, portability, and higher throughput. The incorporation of biological components onto biological microelectromechanical systems (bioMEMS) has shown great potential for achieving these goals. Microfabricated electronic chips allow for micrometer-scale features as well as an electrical connection for sensing and actuation. Functional biological components give the system the capacity for specific detection of analytes, enzymatic functions, and whole-cell capabilities. Standard microfabrication processes and bio-analytical techniques have been successfully utilized for decades in the computer and biological industries, respectively. Their combination and interfacing in a lab-on-a-chip environment, however, brings forth new challenges. There is a call for techniques that can build an interface between the electrode and biological component that is mild and is easy to fabricate and pattern. Biofabrication, described here, is one such approach that has shown great promise for its easy-to-assemble incorporation of biological components with versatility in the on-chip functions that are enabled. Biofabrication uses biological materials and biological mechanisms (self-assembly, enzymatic assembly) for bottom-up hierarchical assembly. While our labs have demonstrated these concepts in many formats, here we demonstrate the assembly process based on electrodeposition followed by multiple applications of signal-based interactions. The assembly process consists of the electrodeposition of biocompatible stimuli-responsive polymer films on electrodes and their subsequent functionalization with biological components such as DNA, enzymes, or live cells. Electrodeposition takes advantage of the pH gradient created at the surface of a biased electrode from the electrolysis of water. Chitosan and alginate are stimuli-responsive biological polymers that can be triggered to self-assemble into hydrogel films in response to imposed electrical signals. The thickness of these hydrogels is determined by the extent to which the pH gradient extends from the electrode. This can be modified using varying current densities and deposition times. This protocol will describe how chitosan films are deposited and functionalized by covalently attaching biological components to the abundant primary amine groups present on the film through either enzymatic or electrochemical methods. Alginate films and their entrapment of live cells will also be addressed. Finally, the utility of biofabrication is demonstrated through examples of signal-based interaction, including chemical-to-electrical, cell-to-cell, and also enzyme-to-cell signal transmission. Both the electrodeposition and functionalization can be performed under near-physiological conditions without the need for reagents and thus spare labile biological components from harsh conditions. Additionally, both chitosan and alginate have long been used for biologically-relevant purposes. Overall, biofabrication, a rapid technique that can be simply performed on a benchtop, can be used for creating micron scale patterns of functional biological components on electrodes and can be used for a variety of lab-on-a-chip applications.

Transglutaminase-mediated synthesis of a DNA-(enzyme)n probe for highly sensitive DNA detection

A new synthetic strategy for DNA-enzyme conjugates with a novel architecture was explored using a natural cross-linking catalyst, microbial transglutaminase (MTG). A glutamine-donor substrate peptide of MTG was introduced at the 5-position on the pyrimidine of deoxyuridine triphosphate to prepare a DNA strand with multiple glutamine-donor sites by polymerase chain reaction (PCR). A substrate peptide that contained an MTG-reactive lysine residue was fused to the N terminus of a thermostable alkaline phoshatase from Pyrococcus furiosus (PfuAP) by genetic engineering. By combining enzymatically the substrate moieties of MTG introduced to the DNA template and the recombinant enzyme, a DNA-(enzyme)(n) conjugate with 1:n stoichiometry was successfully obtained. The enzyme/DNA ratio of the conjugate increased as the benzyloxycarbonyl-L-glutaminylglycine (Z-QG) moiety increased in the DNA template. The potential utility of the new conjugate decorated with signaling enzymes was validated in a dot blot hybridization assay. The DNA-(enzyme)(n) probe could clearly detect 10(4) copies of the target nucleic acid with the complementary sequence under harsh hybridization conditions, thereby enabling a simple detection procedure without cumbersome bound/free processes associated with a conventional hapten-antibody reaction-based DNA-detection system.

Biofabrication with Biopolymers and Enzymes: Potential for Constructing Scaffolds from Soft Matter

Purpose

Regenerative medicine will benefit from technologies capable of fabricating soft matter to have appropriate architectures and that provide the necessary physical, chemical and biological cues to recruit cells and guide their development. The goal of this report is to review an emerging set of biofabrication techniques and suggest how these techniques could be applied for the fabrication of scaffolds for tissue engineering.

Methods

Electrical potentials are applied to submerged electrodes to perform cathodic and anodic reactions that direct stimuli-responsive film-forming polysaccharides to assemble into hydrogel films. Standard methods are used to microfabricate electrode surfaces to allow the electrical signals to be applied with spatial and temporal control. The enzymes mushroom tyrosinase and microbial transglutaminase are used to catalyze macromolecular grafting and crosslinking of proteins.

Results

Electrodeposition of the polysaccharides chitosan and alginate allow hydrogel films to be formed in response to localized electrical signals. Co-deposition of various components (e.g., proteins, vesicles and cells), and subsequent electrochemical processing allow the physical, chemical and biological activities of these films to be tailored. Enzymatic processing allows for the generation of stimuli-responsive protein conjugates that can also be directed to assemble in response to imposed electrical signals. Further, enzyme-catalyzed crosslinking of gelatin allows replica molding of soft matter to create hydrogel films with topological structure.

Conclusions

Biofabrication with biological materials and mechanisms provides new approaches for soft matter construction. These methods may enable the formation of tissue engineering scaffolds with appropriate architectures, assembled cells, and spatially organized physical, chemical and biological cues.

Electrophoretic deposition of biomaterials

Electrophoretic deposition (EPD) is attracting increasing attention as an effective technique for the processing of biomaterials, specifically bioactive coatings and biomedical nanostructures. The well-known advantages of EPD for the production of a wide range of microstructures and nanostructures as well as unique and complex material combinations are being exploited, starting from well-dispersed suspensions of biomaterials in particulate form (microsized and nanoscale particles, nanotubes, nanoplatelets). EPD of biological entities such as enzymes, bacteria and cells is also being investigated. The review presents a comprehensive summary and discussion of relevant recent work on EPD describing the specific application of the technique in the processing of several biomaterials, focusing on (i) conventional bioactive (inorganic) coatings, e.g. hydroxyapatite or bioactive glass coatings on orthopaedic implants, and (ii) biomedical nanostructures, including biopolymer-ceramic nanocomposites, carbon nanotube coatings, tissue engineering scaffolds, deposition of proteins and other biological entities for sensors and advanced functional coatings. It is the intention to inform the reader on how EPD has become an important tool in advanced biomaterials processing, as a convenient alternative to conventional methods, and to present the potential of the technique to manipulate and control the deposition of a range of nanomaterials of interest in the biomedical and biotechnology fields.