Natural biopolymers: novel templates for the synthesis of nanostructures

Antibacterial fibers impregnated with mycosynthetized AgNPs for control of Pectobacterium carotovorum

Using biopolymers functionalized with antibacterial agents to manufacture active packaging is a clean alternative to mitigate food losses due to postharvest plant diseases. In this study, two mycosynthetized AgNPs impregnation methodologies on cotton (cationization and in situ biochemical reduction) were used to obtain the antibacterial fibers (A-AgNPs-C and A-AgNPs-IBR), which, in addition to being characterized by SEM-EDX, XRD, were evaluated as antibacterial materials. The cotton fibers showed growth inhibition of Pectobacterium carotovorum at 48 h. The reuse tests of these cotton fibers showed that the two types of fibers could have up to three successive uses without losing their effectiveness, regardless of the impregnation method used. Is important to highlight that the retention tests indicated that the AgNPs remain attached to the A-AgNPs-C and A-AgNPs-IBR fibers after several successive washes. Finally, the mycosynthesized AgNPs were also impregnated on fique fibers (Fique-AgNPs) by cationization to obtain little antibacterial sacks. Nanostructured materials that in in vivo tests on potatoes showed only 7.8 % of affectation, while the tubers stored in the traditional sacks had an affectation of 25 %. This immobilization of AgNPs in natural fibers will allow the development of a nanobiotechnological application in the storage and transport of potatoes, after performing some additional cytotoxicity tests to guarantee its safety.

An overview to nanocellulose clinical application: Biocompatibility and opportunities in disease treatment

Recently, the demand for organ transplantation has promptly increased due to the enhanced incidence of body organ failure, the increasing efficiency of transplantation, and the improvement in post-transplant outcomes. However, due to a lack of suitable organs for transplantation to fulfill current demand, significant organ shortage problems have emerged. Developing efficient technologies in combination with tissue engineering (TE) has opened new ways of producing engineered tissue substitutes. The use of natural nanoparticles (NPs) such as nanocellulose (NC) and nano-lignin should be used as suitable candidates in TE due to their desirable properties. Many studies have used these components to form scaffolds and three-dimensional (3D) cultures of cells derived from different tissues for tissue repair. Interestingly, these natural NPs can afford scaffolds a degree of control over their characteristics, such as modifying their mechanical strength and distributing bioactive compounds in a controlled manner. These bionanomaterials are produced from various sources and are highly compatible with human-derived cells as they are derived from natural components. In this review, we discuss some new studies in this field. This review summarizes the scaffolds based on NC, counting nanocrystalline cellulose and nanofibrillated cellulose. Also, the efficient approaches that can extract cellulose with high purity and increased safety are discussed. We concentrate on the most recent research on the use of NC-based scaffolds for the restoration, enhancement, or replacement of injured organs and tissues, such as cartilage, skin, arteries, brain, and bone. Finally, we suggest the experiments and promises of NC-based TE scaffolds.

Size-Controlled Silver Nanoparticles Supported by Pyrolytic Carbon from Microcrystalline Cellulose

A facile method was developed for preparing size-controlled silver nanoparticles supported by pyrolytic carbon from microcrystalline cellulose (MCC). The pyrolysis of cellulose-AgNO3 mixture caused the oxidation of cellulose, resulting in carboxyl groups to which silver ions can bind firmly and act as nuclei for the deposition of silver nanoparticles. The structure and properties of the obtained nanocomposite were characterized by using a scanning electron microscope (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and X-ray diffraction (XRD). The results suggest that silver nanoparticles were integrated successfully and dispersed uniformly in the pyrolytic carbon matrix. The average particle size varied between 20 nm and 100 nm in correlation to the dose of silver nitrate and temperature of pyrolysis. The products showed high electric conductivity and strong antimicrobial activity against Escherichia coli (E. coli).

Facile synthesis of Cu NPs@Fe3O4-lignosulfonate: Study of catalytic and antibacterial/antioxidant activities

Environmental pollution is one of the important concerns for human health. There are different types of pollutants and techniques to eliminate them from the environment. We hereby report an efficient method for the remediation of environmental contaminants through the catalytic reduction of the selected pollutants. A green method has been developed for the immobilization of copper nanoparticles on magnetic lignosulfonate (Cu NPs@Fe₃O₄-LS) using the aqueous extract of Filago arvensis L. as a non-toxic reducing and stabilizing agent. The characterization of the prepared Cu NPs@Fe₃O₄-LS was achieved by vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), high resolution TEM (HRTEM), X-ray diffraction (XRD), scanning TEM (STEM), thermogravimetry-differential thermal analysis (TG/DTA), fast Fourier transform (FFT), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron (XPS) analyses. The synthesized Cu NPs@Fe₃O₄-LS was applied as a magnetic and green catalyst in the reduction of Congo Red (CR), 4-nitrophenol (4-NP), and methylene blue (MB). The progress of the reduction reactions was monitored by UV-Vis spectroscopy. Finally, the biological properties of the Cu NPs@Fe₃O₄-LS were investigated. The prepared catalyst demonstrated excellent catalytic efficiency in the reduction of CR, 4-NP, and MB in the presence of sodium borohydride (NaBH₄) as the reducing agent. The appropriate magnetism of Cu NPs@Fe₃O₄-LS made its recovery very simple. The advantages of this process include a simple reaction set-up, high and catalytic antibacterial/antioxidant activities, short reaction time, environmentally friendliness, high stability, and easy separation of the catalyst. In addition, the prepared Cu NPs@Fe₃O₄-LS could be reused for four cycles with no significant decline in performance.

Cellulose Structures as a Support or Template for Inorganic Nanostructures and Their Assemblies

Cellulose is the most abundant natural polymer and deserves the special attention of the scientific community because it represents a sustainable source of carbon and plays an important role as a sustainable energent for replacing crude oil, coal, and natural gas in the future. Intense research and studies over the past few decades on cellulose structures have mainly focused on cellulose as a biomass for exploitation as an alternative energent or as a reinforcing material in polymer matrices. However, studies on cellulose structures have revealed more diverse potential applications by exploiting the functionalities of cellulose such as biomedical materials, biomimetic optical materials, bio-inspired mechanically adaptive materials, selective nanostructured membranes, and as a growth template for inorganic nanostructures. This article comprehensively reviews the potential of cellulose structures as a support, biotemplate, and growing vector in the formation of various complex hybrid hierarchical inorganic nanostructures with a wide scope of applications. We focus on the preparation of inorganic nanostructures by exploiting the unique properties and performances of cellulose structures. The advantages, physicochemical properties, and chemical modifications of the cellulose structures are comparatively discussed from the aspect of materials development and processing. Finally, the perspective and potential applications of cellulose-based bioinspired hierarchical functional nanomaterials in the future are outlined.

Use of Nanocellulose to Produce Water-Based Conductive Inks with Ag NPs for Printed Electronics

The need for more sustainable printed electronics has emerged in the past years. Due to this, the use of nanocellulose (NC) extracted from cellulose has recently been demonstrated to provide interesting materials such as functional inks and transparent flexible films due to its properties. Its high specific surface area together with the high content of reactive hydroxyl groups provide a highly tailorable surface chemistry with applications in ink formulations as a stabilizing, capping, binding and templating agent. Moreover, NC mechanical, physical and thermal properties (high strength, low porosity and high thermal stability, respectively) provide an excellent alternative for the currently used plastic films. In this work, we present a process for the production of water-based conductive inks that uses NC both as a template for silver nanoparticles (Ag NPs) formation and as an ink additive for ink formulation. The new inks present an electrical conductivity up to 2 × 10⁶ S/m, which is in the range of current commercially available conductive inks. Finally, the new Ag NP/NC-based conductive inks have been tested to fabricate NFC antennas by screen-printing onto NC-coated paper, demonstrating to be operative.

Facile synthesis of metal nanoparticle-loaded polymer nanocomposite with highly efficient an optically enhanced biocidal and anticancer agents

In this work, we prepared silver nanoparticles (AgNPs)-loaded poly(2,5-dimethoxyaniline;PDMA) nanocomposite via a simple chemical oxidative method to develop new effective biocidal and anticancer agents systems. In situ UV-vis and fluorescence spectroscopy has been used to monitor the formation of PDMA/Ag is strongly dependent on the concentration of PDMA in the present system. The FTIR and XRD studies exhibit that the rate of polymer formation and oxidation state of PDMA/Ag nanocomposite, which confirmed the AgNPs is strongly binding with the PDMA matrix. SEM and EDAX analysis revealed the presence of uniform size and the highest percentage of AgNPs (42.1%) in the PDMA/Ag nanocomposite. TEM and size distribution analysis revealed the presence of spherical AgNPs with an average diameter of 25 nm in the PDMA/Ag nanocomposite. In addition, the PDMA polymer with embedded AgNPs exhibited excellent antibacterial performance against Escherichia coli and Staphylococcus aureus. Interestingly, the prepared PDMA/Ag nanocomposite exhibited enhanced bactericidal performance compared with the PDMA polymer, presumably because of the antibacterial properties of the AgNPs substrate. The anticancer effects of combined treatment with PDMA polymer and AgNPs were evaluated using a series of cellular and biochemical assays. The findings from this study revealed that the PDMA/Ag nanocomposite treatment significantly inhibited cell viability and proliferation of the human cervical cancer cell line (HeLa). The PDMA/Ag nanocomposite exhibits better antibacterial and anticancer activities compare to pristine PDMA.

Self-assembly in biobased nanocomposites for multifunctionality and improved performance

Concerns of petroleum dependence and environmental pollution prompt an urgent need for new sustainable approaches in developing polymeric products. Biobased polymers provide a potential solution, and biobased nanocomposites further enhance the performance and functionality of biobased polymers. Here we summarize the unique challenges and review recent progress in this field with an emphasis on self-assembly of inorganic nanoparticles. The conventional wisdom is to fully disperse nanoparticles in the polymer matrix to optimize the performance. However, self-assembly of the nanoparticles into clusters, networks, and layered structures provides an opportunity to address performance challenges and create new functionality in biobased polymers. We introduce basic assembly principles through both blending and in situ synthesis, and identify key technologies that benefit from the nanoparticle assembly in the polymer matrix. The fundamental forces and biobased polymer conformations are discussed in detail to correlate the nanoscale interactions and morphology with the macroscale properties. Different types of nanoparticles, their assembly structures and corresponding applications are surveyed. Through this review we hope to inspire the community to consider utilizing self-assembly to elevate functionality and performance of biobased materials. Development in this area sets the foundation for a new era of designing sustainable polymers in many applications including packaging, construction chemicals, adhesives, foams, coatings, personal care products, and advanced manufacturing.

Lignin Nanoparticle Nucleation and Growth on Cellulose and Chitin Nanofibers

Cellulose (CNF) and chitin (ChNF) nanofibers are known to form materials that are both tough and strong. In this study, we hypothesize that the inertness of networks produced from CNF and ChNF makes them ideal templates for heterogeneous reactions and in situ formation of nanoarchitectures. We expand nanoparticle templating on polysaccharide colloids by introducing a new and facile process that leads to the growth of organic nanoparticles on CNF and ChNF in aqueous media. The process, based on solvent shifting supported on solid interfaces, is demonstrated by direct observation of lignin nanoparticles that are further used for their photocatalytic activity. Importantly, the dynamics of nanoparticle nucleation and growth is correlated with the surface chemistry of the templating nanopolysaccharides. Electrostatic repulsion between the deprotonated lignin molecules and the slightly negative CNF support led to limited adsorption and was effective in producing free (nonbound) lignin nanoparticles (28 ± 7 nm) via precipitation. In contrast, the stronger interfacial interactions between the positively charged ChNF and lignin molecules facilitated instantaneous and extensive lignin adsorption, followed by nucleation and growth into relatively larger nanoparticles (46 ± 17 nm). The latter were homogeneously distributed and strongly coupled to the ChNF support. Overall, we introduce lignin nanoparticle nucleation and growth on renewable nanopolysaccharides, offering an effective route toward in situ synthesis of highly functional fibrils and related cohesive films that offer a great potential in packaging and other applications.

Converting cellulose nanocrystals into photocatalysts by functionalisation with titanium dioxide nanorods and gold nanocrystals

Cellulose nanocrystals (CNCs) are promising building blocks for water purification due to their high surface area, tuneability of surface charge and grafting of surface groups depending on the pollutants. In this report we have converted CNCs into photocatalysts, without altering the surface groups, by in situ growth of TiO2 nanorods (NRs) and functionalization with Au nanocrystals (NCs) for enhanced light absorption. The control of the density of the NRs assures that the CNC surface and functionalities are accessible for the pollutant, followed by the photocatalytic degradation on the light absorption layer under solar illumination. This seed-mediated NR synthesis can be applied to realize a series of CNC-inorganic NR photocatalysts. The low temperature (90 °C compared to commonly reported growth at 150 °C) of the NR growth provides the opportunity to use nanostructured biopolymers as functional substrates for preparation of photocatalysts using a bio-inspired design.

Hydroxyl groups on cellulose nanocrystal surfaces form nucleation points for silver nanoparticles of varying shapes and sizes

In this study, we investigate the interactions between the cellulose surface and Ag nanoparticles (AgNPs) for the purpose of manufacturing hybrid nanomaterials using bacterial cellulose nanocrystals (BCNs) as a model substrate. We focus on the role of the BCN surface chemistry on the AgNP nucleation obtained by chemical reduction of Ag⁺ ions. Homogeneous hybrid suspensions of BCN/AgNP are produced, regardless of whether the BCNs are quasi-neutral, negatively (TBCNs) or positively charged (ABCNs). The characterization of BCN/AgNP hybrids identifies the -OH surface groups as nucleation points for AgNPs, of about 20 nm revealing that surface charges only improve the accessibility to OH groups. X-ray Absorption technics (XANES and EXAFS) revealed a high metallic Ag₀ content ranging from 88% to 97%. Moreover, the grafting of hydrophobic molecules on a BCN surface (HBCNs) does not prevent AgNP nucleation, illustrating the versatility of our method and the possibility to obtain bifunctional NPs. A H₂O₂ redox post-treatment on the hybrid induces an increase in AgNPs size, up to 90 nm as well as a shape variation (i.e., triangular). In contrast, H₂O₂ induces no size/shape variation for aggregated hybrids, emphasizing that the accessibility to -OH groups ensures the nucleation of bigger Ag nano-objects.

Aerogels from copper (II)-cellulose nanofibers and carbon nanotubes as absorbents for the elimination of toxic gases from air

A novel deodorizer that is capable of selectively eliminating the odorous chemicals, such as ammonia, trimethylamine, hydrogen sulfide and methyl mercaptan, is described. The deodorizer is a nanostructured aerogel by nature, consisting of 2,2-6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized cellulose nanofibrils (CNF), transition metal divalent cations (M²⁺), and multi-walled carbon nanotubes (CNT) as the constitutive elements. CNF are firstly mixed with M²⁺ (M²⁺, in this paper, typifies Ni²⁺, Co²⁺ and Cu²⁺) to form CNF-M²⁺ complexes, monodispersed CNT is then mixed to prepare CNT/CNF-M²⁺ waterborne slurries; CNT/CNF-M²⁺ hybridized aerogels are finally obtained via freezing-drying of the CNT/CNF-M²⁺ waterborne slurries. The CNT/CNF-M²⁺ aerogels are a foam-like structure consisting of CNF and CNT as backbones and M²⁺ as linkers. The aerogels show higher capabilities (in comparison with activated carbon) for selectively adsorbing ammonia, trimethylamine, hydrogen sulfide and methyl mercaptan. Computing simulations suggest a theoretical conclusion that the odorous chemicals are absorbed in a preferring manner of bimolecular absorptions via the M²⁺ moieties. The CNT/CNF-M²⁺ hybridized aerogels are lightweight, eco-friendly, and easy to produce in industrial scales. Our new finding, as is described in this paper, demonstrates potential applications of the TEMPO-oxidized CNF to the field of deodorizations.

Unique and outstanding quantum dots (QD)/tunicate cellulose nanofibrils (TCNF) nanohybrid platform material for use as 1D ink and 2D film

Quantum dots (QD)/polymer materials have wide applications in biological imaging, clinical diagnostics, anti-counterfeiting materials, light-emitting devices and solar cells. The development of QD/cellulose nanofibrils (CNF) hybrids with a more perfect structure and excellent properties is important for improving known applications. A unique tunicate CNF (TCNF) was homogeneously blended with outstanding CdSe/CdS core/shell QD to prepare a novel QD/TCNF hybrid. The QD were monodispersed on a single TCNF fibril surface as an evenly distributed monolayer with an extremely high packing density and no visible aggregation. The prepared hybrid is an excellent platform nanomaterial which was demonstrated by its good writing fidelity when applied as a 1D ink and by its good processability in the preparation of 2D films with acceptable transparency and flexibility. This one-step direct blending approach provides a facile shortcut to effectively fabricate cellulose-based high-performance functional QD nanomaterials at the single-fibril level.

Formation of Size and Density Controlled Nanostructures by Galvanic Displacement

Gold (Au) and copper (Cu)-based nanostructures are of great interest due to their applicability in various areas including catalysis, sensing and optoelectronics. Nanostructures synthesized by the galvanic displacement method often lead to non-uniform density and poor size distribution. Here, density and size-controlled synthesis of Au and Cu-based nanostructures was made possible by galvanic displacement with limited exposure to hydrofluoric (HF) acid and the use of surfactants like L-cysteine (L-Cys) and cetyltrimethylammonium bromide (CTAB). An approach involving cyclic exposure to HF acid regulated the nanostructure density. Further, the use of surfactants generated monodisperse nanoparticles in the initial stages of the deposition with increased density. The characterization of Au and Cu-based nanostructures was performed by scanning electron microscopy, atomic force microscopy, UV-Visible spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and X-ray diffraction. The surface enhanced Raman spectroscopic measurements demonstrated an increase in the Raman intensity by two to three orders of magnitude for analyte molecules like Rhodamine 6G dye and paraoxon.

Methods and applications of nanocellulose loaded with inorganic nanomaterials: A review

Nanocellulose obtained from natural renewable resources has attracted enormous interests owing to its unique morphological characteristics, excellent mechanical strength, biocompatibility and biodegradability for a variety of applications in many fields. The template structure, high specific surface area, and active surface groups make it feasible to conduct surface modification and accommodate various nano-structured materials via physical or chemical deposition. The review presented herein focuses on the methodologies of loading different nano-structured materials on nanocellulose, including metals, nanocarbons, oxides, mineral salt, quantum dots and nonmetallic elements; and further describes the applications of nanocellulose composites in the fields of catalysis, optical electronic devices, biomedicine, sensors, composite reinforcement, photoswitching, flame retardancy, and oil/water separation.

Preparation and characterization of hybrid chitosan-silver nanoparticles (Chi-Ag NPs); A potential antibacterial agent

In this study, a novel ecofriendly chitosan- silver nanoparticles hybrid was developed. Biological method using leaf extract of T. portulacifolium was used as reducing agent for its synthesis and the antibacterial efficiency of these hybrid nanoparticles were evaluated against the bacteria E. coli and S. marcescens organisms. The intense peak observed around 419 nm in the UV-Vis indicates the formation of silver nanoparticles. The XRD analysis showed that the hybrid chitosan-silver nanoparticles have a polycrystalline and face-centered cubic configuration. FTIR spectrum hybrid chitosan-silver nanoparticles indicated speaks vibration of NH and OH. The EDS analysis confirmed the presence of Ag, O, C and N elements in the prepared sample. The spherical shape was obtained from TEM analysis and it indicated that with average particles around 3.24 nm to 44.80 nm. The prepared hybrid chitosan-silver nanoparticles showed significant antibacterial activities against E. coli and S. marcescens. In addition, the surface membrane damages and surface morphology of test pathogens were visualized using FESEM analysis.

A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling

Cellulose is world's most abundant, renewable and recyclable polysaccharide on earth. Cellulose is composed of both amorphous and crystalline regions. Cellulose nanocrystals (CNCs) are extracted from crystalline region of cellulose. The most attractive feature of CNC is that it can be used as nanofiller to reinforce several synthetic and natural polymers. In this article, a comprehensive overview of modification of several natural and synthetic polymers using CNCs as reinforcer in respective polymer matrix is given. The immense activities of CNCs are successfully utilized to enhance the mechanical properties and to broaden the field of application of respective polymer. All the technical scientific issues have been discussed highlighting the recent advancement in biomedical and packaging field.

Biopolymer as Stabilizer and Adhesive To in Situ Precipitate CuS Nanocrystals on Cellulose Nanofibers for Preparing Multifunctional Composite Papers

In order to solve the uneven distribution of copper sulfide nanocrystals (CuS-NCs) on cellulose nanofibers (CNFs), this work reports a feasible method to in situ precipitate CuS-NCs on CNF by utilizing biopolymers (lignin, xylan, or starch) as stabilizer and adhesive for fabricating the multifunctional composite papers. In the presence of biopolymers, CuS-NCs deposited in situ on CNF could be capped and stabilized by the biopolymers molecular chains for uniform distribution. Subsequently, biopolymers could anchor CuS-NCs on CNF by the hydrogen bonding. Compared to the composite paper with lignin or xylan as stabilizer and adhesive, CuS-NCs/starch/CNF paper showed the highest content and most uniform and continuous distribution of CuS-NCs, which not only enhanced the conductivity of composite paper to 10.12 S/cm but also increased the reaction rate constant on photocatalytic degradation of rhodamine B to 0.317 min-1. The reaction rate constant is higher than most of the other reported CuS photocatalysts to date. It indicates that our method has a potential to be a novel strategy to precipitate nanocrystals uniformly on cellulose fibers for fabricating the multifunctional composite paper.

Individually Dispersed Gold Nanoshell-Bearing Cellulose Nanocrystals with Tailorable Plasmon Resonance

Cellulose nanocrystals (CNCs) can be attractive templates for the generation of functional inorganic/organic nanoparticles, given their fine sizes, aspect ratios, and sustainable worldwide availability in abundant quantities. Here, we present for the first time a scalable, surfactant-free, tailorable wet chemical process for converting commercially available CNCs into individual aspected gold nanoshell-bearing particles with tunable surface plasmon resonance bands. Using a rational cellulose functionalization approach, stable suspensions of positively charged CNCs have been generated. Continuous, conductive, nanocrystalline gold coatings were then applied to the individual, electrostatically stabilized CNCs via decoration with 1-3 nm diameter gold particles followed by electroless gold deposition. Optical analyses indicated that these core-shell nanoparticles exhibited two surface plasmon absorbance bands, with one located in the visible range (near 550 nm) and the other at near infrared (NIR) wavelengths. The NIR band possessed a peak maximum wavelength that could be tuned over a wide range (1000-1300 nm) by adjusting the gold coating thickness. The bandwidth and wavelength of the peak maximum of the NIR band were also sensitive to the particle size distribution and could be further refined by fractionation using viscosity gradient centrifugation.

Cellulose nanocrystal (CNC)–inorganic hybrid systems: synthesis, properties and applications

Cellulose nanocrystal (CNC), a class of sustainable nanomaterial derived from forest and agro-biomass can serve as nature's storage for carbon dioxide.

Nanocellulose as a sustainable biomass material: structure, properties, present status and future prospects in biomedical applications

Nanocellulose, extracted from the most abundant biomass material cellulose, has proved to be an environmentally friendly material with excellent mechanical performance owing to its unique nano-scaled structure, and has been used in a variety of applications as engineering and functional materials. The great biocompatibility and biodegradability, in particular, render nanocellulose promising in biomedical applications. In this review, the structure, treatment technology and properties of three different nanocellulose categories, i.e., nanofibrillated cellulose (NFC), nanocrystalline cellulose (NCC) and bacterial nanocellulose (BNC), are introduced and compared. The cytotoxicity, biocompatibility and frontier applications in biomedicine of the three nanocellulose categories were the focus and are detailed in each section. Future prospects concerning the cytotoxicity, applications and industrial production of nanocellulose are also discussed in the last section.

Photochemical formation of chitosan-stabilized near-infrared-absorbing silver Nanoworms: A "Green" synthetic strategy and activity on Gram-negative pathogenic bacteria

A facile, single-step, non-seeded photochemical protocol for producing a new type of anisotropic silver nanostructure, "nanoworms", with curved longer dimensions and smooth, rounded edges. The nanoworms exhibit surface plasmon resonance (SPR) absorption in the near-infrared window (NIRW) region and are stabilized using biocompatible polymer chitosan, rendering biocompatibility and amplified safety for biological utility of the composition. Both NIRW-absorbing nanoworms and visible-absorbing nanospheres herein are attained exclusively by employing green chemistry principles. Contrary to seed-mediated or polyol techniques, the protocol demonstrates the feasibility to selectively synthesize NIRW-absorbing silver nanostructures in a single step and in complete absence of any known reducing agent. The effect of irradiation, pH, and concentration of starting materials on the formation of nanoworms vs nanospheres is investigated in detail and analyzed by optical spectroscopy and electron microscopy. The dominant SPR obtained in the NIRW region of the nanoworms results from anisotropic AgNPs, as opposed to agglomeration. From TEM images, it is also very clear that a strong correlation exists between the SPR peak maximum and the size distribution of the anisotropic nanoworm structures, with SPR peak maximum exhibiting red shift with the increase in the size of the nanoworm population. Although there is significant size variation of different nanoworms of a given population, all samples exhibit remarkable stability. The nanoworms retained their NIRW-absorbing features even at physiological pH and at a constant ionic strength. The nanodispersions also retained their SPR features in King's B medium. Antipathogenic assays reveal that the anisotropic NIRW-absorbing nanoworms exhibit the highest growth inhibition compared to other spherical nanosilver and molecular silver forms on Gram-negative pathogenic bacteria, Pseudomonas syringae pv. maculicola ES4326 and P. syringae pv. tomato DC3000. These results underscore shape effects of AgNPs and suggest that nanoworms favor the adhesion to (curved) rod-shaped Gram-negative bacteria, resulting in the highest inhibition compared to isotropic AgNPs (smaller spheres), sulfa antibiotics (silver sulfadiazine), and silver ions (AgNO₃).

Self-Assembled Hierarchical Arrays for Colored Retroreflective Coatings

This study reports a self-assembly technology for fabricating retroreflection coatings with hierarchical nano-/microstructures, which are inspired by the binary periodic structures found in the compound eyes of insects. Silica colloidal crystals of adjustable thicknesses are assembled on encountering glass microbeads using a Langmuir-Blodgett-like approach in a layer-by-layer manner. The as-assembled hierarchical structures exhibit a brilliant color caused by Bragg diffraction from the crystalline lattice of silica colloidal crystals on glass microbeads. The resultant coating is capable of reflecting light in the opposite direction of the incident light. Moreover, the dependence of the silica particle size, the colloidal crystal thickness, and the incident angle on the retroreflective properties are investigated in this study.

Cellulose nanofiber backboned Prussian blue nanoparticles as powerful adsorbents for the selective elimination of radioactive cesium

On 11 March 2011, the day of the unforgettable disaster of the 9 magnitude Tohoku earthquake and quickly followed by the devastating Tsunami, a damageable amount of radionuclides had dispersed from the Fukushima Daiichi's damaged nuclear reactors. Decontamination of the dispersed radionuclides from seawater and soil, due to the huge amounts of coexisting ions with competitive functionalities, has been the topmost difficulty. Ferric hexacyanoferrate, also known as Prussian blue (PB), has been the most powerful material for selectively trapping the radioactive cesium ions; its high tendency to form stable colloids in water, however, has made PB to be impossible for the open-field radioactive cesium decontamination applications. A nano/nano combinatorial approach, as is described in this study, has provided an ultimate solution to this intrinsic colloid formation difficulty of PB. Cellulose nanofibers (CNF) were used to immobilize PB via the creation of CNF-backboned PB. The CNF-backboned PB (CNF/PB) was found to be highly tolerant to water and moreover, it gave a 139 mg/g capability and a million (10⁶) order of magnitude distribution coefficient (K_d) for absorbing of the radioactive cesium ion. Field studies on soil and seawater decontaminations in Fukushima gave satisfactory results, demonstrating high capabilities of CNF/PB for practical applications.

Cellulose nanocrystals as templates for cetyltrimethylammonium bromide mediated synthesis of Ag nanoparticles and their novel use in PLA films

In the present paper, we reported how cellulose nanocrystals (CNC) from microcrystalline cellulose have the capacity to assist in the synthesis of metallic nanoparticles chains. A cationic surfactant, cetyltrimethylammonium bromide (CTAB), was used as modifier for CNC surface. Silver nanoparticles were synthesized on CNC, and nanoparticle density and size were optimized by varying concentrations of nitrate and reducing agents, and the reduction time. The experimental conditions were optimized for the synthesis and the resulting Ag grafted CNC (Ag-g-CNC) were characterized by means of TGA, SEM, FTIR and XRD, and then introduced in PLA matrix. PLA nanocomposite containing silver grafted cellulose nanocrystals (PLA/0.5Ag-g-1CNC) was characterized by optical and thermal analyses and the obtained data were compared with results from PLA nanocomposites containing 1% wt. of CNC (PLA/1CNC), 0.5% wt. of silver nanoparticles (PLA/0.5Ag) and hybrid system containing CNC and silver in the same amount (PLA/1CNC/0.5Ag). The results demonstrated that grafting of silver nanoparticles on CNC positively affected the thermal degradation process and cold crystallization processes of PLA matrix. Finally, the antibacterial activity of the different systems was studied at various incubation times and temperatures, showing the best performance for PLA/1CNC/0.5Ag based nanocomposite.

Use of nanocellulose in printed electronics: a review

Since the last decade, interest in cellulose nanomaterials known as nanocellulose has been growing. Nanocellulose has various applications ranging from composite reinforcement to rheological modifiers. Recently, nanocellulose has been shown to have great potential in flexible printed electronics applications. The property of nanocellulose to form self-standing thermally stable films has been exploited for producing transparent and smooth substrates for printed electronics. However, other than substrates, the field of printed electronics involves the use of inks, various processing methods and the production of flexible electronic devices. This review aims at providing an overview of the use and potential of nanocellulose throughout the printed electronics field.

Nanocellulose, a tiny fiber with huge applications

Nanocellulose is of increasing interest for a range of applications relevant to the fields of material science and biomedical engineering due to its renewable nature, anisotropic shape, excellent mechanical properties, good biocompatibility, tailorable surface chemistry, and interesting optical properties. We discuss the main areas of nanocellulose research: photonics, films and foams, surface modifications, nanocomposites, and medical devices. These tiny nanocellulose fibers have huge potential in many applications, from flexible optoelectronics to scaffolds for tissue regeneration. We hope to impart the readers with some of the excitement that currently surrounds nanocellulose research, which arises from the green nature of the particles, their fascinating physical and chemical properties, and the diversity of applications that can be impacted by this material.

DNA templated synthesis of branched gold nanostructures with highly efficient near-infrared photothermal therapeutic effects

Herein, we show that DNA nanostructures have great potential as templates for the synthesis of shape-controlled metal nanostructures.

Coassembly of gold nanoparticles and cellulose nanocrystals in composite films

Coassembly of nanoparticles with different size-, shape-, and composition-dependent properties is a promising approach to the design and fabrication of functional materials and devices. This paper reports the results of a detailed investigation of the formation and properties of free-stranding composite films formed by the coassembly of cellulose nanocrystals and shape-isotropic plasmonic gold nanoparticles. The effect of gold nanoparticle size, surface charge, and concentration on the structural and optical properties of the composite films has been studied. The composite films retained photonic crystal and chiroptical activity properties. The size and surface charge of gold nanoparticles had a minor effect on the structure and properties of the composite films, while the concentration of gold nanoparticles in the composite material played a more significant role and can be used to fine-tune the optical properties of materials derived from cellulose nanocrystals. These findings significantly broaden the range of nanoparticles that can be used for producing nanocomposite materials based on cellulose nanocrystals. The simplicity of film preparation, the abundance of cellulose nanocrystals, and the robust, free-standing nature of the composite films offer highly advantageous features and pave the way for the generation of functional materials with coupled optical properties.

Polysaccharide nanoparticles for protein and Peptide delivery: exploring less-known materials

Finding adequate carriers for protein and peptide delivery has become an urgent need, owing to the growing number of macromolecules identified as having therapeutic potential. Nanoparticles have emerged in the field as very promising vehicles and much work has been directed to testing the capacity of different materials to compose the matrix of these carriers. Natural materials and, specifically, polysaccharides have been taking the forefront of the challenge, because of several favoring properties that include the higher propensity to exhibit biodegradability and biocompatibility, and also the high structural flexibility. The majority of works found in the literature regarding polysaccharide nanoparticles uses very popular materials like chitosan or hyaluronic acid. This review is aimed at describing and exploring the potential of polysaccharides that are not so well known or that are less explored. For those, the main properties will be described, together with an overview of the reported applications as nanoparticle matrix materials.

Green synthesis of bimetallic Au@Pt nanostructures and their application for proliferation inhibition and apoptosis induction in human cervical cancer cell

Bimetallic Au@Pt nanostructures (Au@Pts) are potential candidates for optical, electrical, catalytic and biological applications. However, methods for the fabrication of Au@Pts using total tea polyphenols (TPPs), studies of the mechanism of action of Au@Pts on biological systems and studies on the application of Au@Pts in cancer diagnosis and therapy are sparse. In this study, we developed a simple, eco-friendly and low-cost method for the synthesis of Au@Pts to examine the cytotoxic effect of these Au@Pts on human cervical cancers in vitro. The gold and platinum ions were successfully reduced simultaneously using TPPs at room temperature. The prepared Au@Pts were characterized using UV-Vis spectrophotometery, X-ray diffractometery (XRD), energy-dispersive X-ray spectroscopy (EDS), and transmission electron microscopy (TEM). EDS and XRD confirmed the formation of the Au@Pt. Formation of Au@Pts with a size of 5-20 nm was confirmed using TEM. The cytotoxic properties of the Au@Pts were evaluated in human cervical cancer cells (SiHa). The cell viability results revealed that Au@Pts induce cell death in a dose- and time-dependent manner. The morphological features of the Au@Pt-exposed SiHa cells were observed and indicated cell death via cell shrinkage, intranucleosomal DNA fragmentation and chromatin condensation. During progression of the different phases of the cell cycle, the proportion of cells in the G2/M phase of the treated SiHa cells was significantly increased, which strongly confirmed that the Au@Pts induced apoptosis through the G2/M phase check points. Our findings demonstrate the activity of Au@Pts against cervical cancer cells and reveal strategies for the development of highly active bimetallic nanostructures for cancer therapeutics.