Kinetic assembly of near-IR-active gold nanoclusters using weakly adsorbing polymers to control the size

Biodegradable Gold Nanoclusters with Improved Excretion Due to pH-Triggered Hydrophobic-to-Hydrophilic Transition

Gold is a highly useful nanomaterial for many clinical applications, but its poor biodegradability can impair long-term physiological clearance. Large gold nanoparticles (∼10-200 nm), such as those required for long blood circulation times and appreciable tumor localization, often exhibit little to no dissolution and excretion. This can be improved by incorporating small gold particles within a larger entity, but elimination may still be protracted due to incomplete dispersion of gold. The present study describes a novel gold nanoparticle formulation capable of environmentally triggered decomposition. Ultrasmall gold nanoparticles are coated with thiolated dextran, and hydrophobic acetal groups are installed through direct covalent modification of the dextran. This hydrophobic exterior allows gold to be densely packed within ∼150 nm polymeric micelles. Upon exposure to an acidic environment, the acetal groups are cleaved and the gold nanoparticles become highly water-soluble, leading to destabilization of the micelle. Within 24 h, the ultrasmall water-soluble gold particles are released from the micelle and readily dispersed. Micelle degradation and gold nanoparticle dispersion was imaged in cultured macrophages, and micelle-treated mice displayed progressive physiological clearance of gold, with >85% elimination from the liver over three months. These particles present a novel nanomaterial formulation and address a critical unresolved barrier for clinical translation of gold nanoparticles.

Biomedical Applications for Gold Nanoclusters: Recent Developments and Future Perspectives

Gold nanoclusters (AuNCs) have been extensively applied as a fluorescent probe for biomedical applications in imaging, detection, and therapy due to their unique chemical and physical properties. Fluorescent probes of AuNCs have exhibited high compatibility, superior photostablility, and excellent water solubility which resulted in remarkable biomedical applications for long-term imaging, high-sensitivity detection, and target-specific treatment. Recently, great efforts have been made in the developments of AuNCs as the fluorescent probes for various biomedical applications. In this review, we have collected fluorescent AuNCs prepared by different ligands, including small molecules, polymers, and biomacromolecules, and highlighted current achievements of AuNCs in biomedical applications for imaging, detection, and therapy. According to these advances, we further provided conclusions of present challenges and future perspectives of AuNCs for fundamental investigations and practical biomedical applications.

Quenched hexacene optoacoustic nanoparticles

Flash NanoPrecipitation allows for the creation of optoacoustic imaging agents with tunable size and strong signal for biomedical imaging and therapy.

Ultrasmall-in-Nano Approach: Enabling the Translation of Metal Nanomaterials to Clinics

Currently, nanomaterials are of widespread use in daily commercial products. However, the most-promising and potentially impacting application is in the medical field. In particular, nanosized noble metals hold the promise of shifting the current medical paradigms for the detection and therapy of neoplasms thanks to the: (i) localized surface plasmon resonances (LSPRs), (ii) high electron density, and (iii) suitability for straightforward development of all-in-one nanoplatforms. Nonetheless, there is still no clinically approved noble metal nanomaterial for cancer therapy and diagnostics. The clinical translation of noble metal nanoparticles (NPs) is mainly prevented by the issue of persistence in organism after the medical action. Such persistence increases the likelihood of toxicity and the interference with common medical diagnoses. Size reduction to ultrasmall nanoparticles (USNPs) is a suitable approach to promoting metal excretion by the renal pathway. However, most of the functionalities of NPs are lost or severely altered in USNPs, jeopardizing clinical applications. A ground-breaking advance to jointly combine the appealing behaviors of NPs with metal excretion relies on the ultrasmall-in-nano approach for the design of all-in-one degradable nanoplatforms composed of USNPs. Such nanoarchitectures might lead to the delivery of a novel paradigm for nanotechnology, enabling the translation of noble metal nanomaterials to clinics to treat carcinomas in a less-invasive and more-efficient manner. This Review covers the recent progresses related to this exciting approach. The most-significant nanoarchitectures designed with the ultrasmall-in-nano approach are discussed, and perspectives on these nanoarchitectures are provided.

Reversible Self-Assembly of Glutathione-Coated Gold Nanoparticle Clusters via pH-Tunable Interactions

Nanoparticle (NP) clusters with diameters ranging from 20 to 100 nm are reversibly assembled from 5 nm gold (Au) primary particles coated with glutathione (GSH) in aqueous solution as a function of pH in the range of 5.4 to 3.8. As the pH is lowered, the GSH surface ligands become partially zwitterionic and form interparticle hydrogen bonds that drive the self-limited assembly of metastable clusters in <1 min. Whereas clusters up to 20 nm in size are stable against cluster-cluster aggregation for up to 1 day, clusters up to 80 nm in size can be stabilized over this period via the addition of citrate to the solution in equal molarity with GSH molecules. The cluster diameter may be cycled reversibly by tuning pH to manipulate the colloidal interactions; however, modest background cluster-cluster aggregation occurs during cycling. Cluster sizes can be stabilized for at least 1 month via the addition of PEG-thiol as a grafted steric stabilizer, where PEG-grafted clusters dissociate back to starting primary NPs at pH 7 in fewer than 3 days. Whereas the presence of excess citrate has little effect on the initial size of the metastable clusters, it is necessary for both the cycling and dissociation to mediate the GSH-GSH hydrogen bonds. In summary, these metastable clusters exhibit significant characteristics of equilibrium self-limited assembly between primary particles and clusters on time scales where cluster-cluster aggregation is not present.

Advanced optoacoustic methods for multiscale imaging of in vivo dynamics

Visualization of dynamic functional and molecular events in an unperturbed in vivo environment is essential for understanding the complex biology of living organisms and of disease state and progression. To this end, optoacoustic (photoacoustic) sensing and imaging have demonstrated the exclusive capacity to maintain excellent optical contrast and high resolution in deep-tissue observations, far beyond the penetration limits of modern microscopy. Yet, the time domain is paramount for the observation and study of complex biological interactions that may be invisible in single snapshots of living systems. This review focuses on the recent advances in optoacoustic imaging assisted by smart molecular labeling and dynamic contrast enhancement approaches that enable new types of multiscale dynamic observations not attainable with other bio-imaging modalities. A wealth of investigated new research topics and clinical applications is further discussed, including imaging of large-scale brain activity patterns, volumetric visualization of moving organs and contrast agent kinetics, molecular imaging using targeted and genetically expressed labels, as well as three-dimensional handheld diagnostics of human subjects.

Control of Primary Particle Spacing in Gold Nanoparticle Clusters for Both High NIR Extinction and Full Reversibility

Reversible NIR-active nanoparticle clusters with controlled size from 20 to 100 nm were assembled from 5 nm gold nanoparticles (Au NP), with either citrate (CIT) or various binary ligands on the surface, by tuning the electrostatic repulsion and the hydrogen bonding via pH. The nanoclusters were bound together by vdW forces between the cores and the hydrogen bonds between the surface ligands and dissociated to primary nanoparticles over a period of 20 days at pH 5 and at pH 7. When high levels of citrate ligands were used on the primary particle surfaces, the large particle spacings in the nanoclusters led to only modest NIR extinction. However, a NIR extinction (E_1000/525) ratio of up to ∼0.4 was obtained for nanoclusters with binary ligand mixtures composed of citrate and either cysteine (CYS), glutathione (GSH), or thioctic acid zwitterion (TAZ) while maintaining full reversibility to primary particles. The optimum ligand ratio for both an E_1000/525 of ∼0.4 and full reversibility decreased with increasing length of the secondary ligand (1.5/1 for CYS/CIT, 0.75/1 for GSH/CIT, and 0.5/1 for TAZ/CIT) because a longer secondary ligand maintains a sufficient interparticle spacing required for dissociation more effectively. Interestingly, the zeta potential and the first-order rate constant for nanocluster dissociation were similar for all three systems at the optimum ligand ratios. After incubation in 10 mM GSH solution (intracellular concentration), only the TAZ/CIT primary nanoparticles were resistant to protein opsonization in 100% fetal bovine serum, as the bidentate binding and zwitterion tips of TAZ resisted GSH exchange and protein opsonization, respectively.

Advances in biodegradable nanomaterials for photothermal therapy of cancer

Photothermal cancer therapy is an alternative to chemotherapy, radiotherapy, and surgery. With the development of nanophotothermal agents, this therapy holds immense potential in clinical translation. However, the toxicity issues derived from the fact that nanomaterials are trapped and retained in the reticuloendothelial systems limit their biomedical application. Developing biodegradable photothermal agents is the most practical route to address these concerns. In addition to the physicochemical properties of nanomaterials, various internal and external stimuli play key roles on nanomaterials uptake, transport, and clearance. In this review, we summarized novel nanoplatforms for photothermal therapy; these nanoplatforms can elicit stimuli-triggered degradation. We focused on the recent innovative designs endowed with biodegradable photothermal agents under different stimuli, including enzyme, pH, and near-infrared (NIR) laser.

Macromolecular Brushes as Stabilizers of Hydrophobic Solute Nanoparticles

Macromolecular brushes bearing poly(ethylene glycol) and poly(d,l-lactide) side chains were used to stabilize hydrophobic solute nanoparticles formed by a rapid change in solvent quality. Unlike linear diblock copolymers with the same hydrophilic and hydrophobic block chemistries, the brush copolymer enabled the formation of ellipsoidal β-carotene nanoparticles, which in cosolvent mixtures developed into rod-like structures, resulting from a combination of Ostwald ripening and particle aggregation. The stabilizing ability of the copolymer was highly dependent on the mobility of the hydrophobic component, influenced by its molecular weight. As shown here, asymmetric amphiphilic macromolecular brushes of this type may be used as hydrophobic drug stabilizers and potentially assist the shape control of nonspherical aggregate morphologies.

Formation of Small Gold Nanoparticle Chains with High NIR Extinction through Bridging with Calcium Ions

The self-assembly of citrate-capped Au nanoparticles (5 nm) resulted in branched nanochains by adding CaCl2 versus spherical nanoclusters for NaCl. These assemblies were formed between 1 s to 30 min by tuning the electrostatic repulsion and the interparticle bridging attraction between the cations and citrate ligands as a function of electrolyte concentration. For dilute Ca(2+), strong interparticle bridging favored particle attachment at chain ends. This resulted in the formation of small, branched chains with lengths as short as 20 nm, due to the large Debye length for the diffuse counterions. Furthermore, the bridging produced very small interparticle spacings and sintering, as evident in high-resolution TEM despite the low temperature. This morphology produced a large red shift in the surface plasmon resonance, as characterized by a broad extinction peak with NIR absorption out to 1000 nm, which is unusual for such small particles. Whereas these properties were seen for primary particles with partial citrate monolayers, the degrees of sintering and NIR extinction were small in the case of citrate multilayers. The ability to design the size and shape of nanoparticle clusters as well as the interparticle spacing by tuning bridging and electrostatic interactions may be expected to be quite general and of broad applicability in materials synthesis.

A multifunctional nanoparticulate theranostic system with simultaneous chemotherapeutic, photothermal therapeutic, and MRI contrast capabilities

Herein, a single-step, scalable approach for preparing a multifunctional, theranostic drug delivery system made out of paclitaxel, iron oxide nanoparticles, gold nanoparticles, and poly(ethylene oxide)-b-poly(ε-caprolactone) is reported.

Au nanoparticle clusters from deposition of a coalescing emulsion

HYPOTHESIS

Nanoparticle adsorption at the oil-water interface in an unstable, coalescing emulsion leads to cluster formation.

EXPERIMENTS

Stable suspensions of clusters are prepared using a facile, two-step procedure involving few reagents and neither thiolated compounds nor chlorinated solvents. First, colloidal gold nanoparticles are assembled at the aqueous-hexanol interface in an emulsion that rapidly coalesces and spontaneously deposits a film on the interior surface of the glass container. The film is dissolved in ethanol with sonication to disperse the clusters. The film and clusters are characterized by transmission electron and atomic force microscopies as well as ultraviolet-visible spectrometry.

FINDINGS

Clusters are observed to contain as few as 8 to as many as 24 Au nanoparticles. The clusters are anisotropic and can also be formed from larger nanoparticles. Hydrophobic and hydrophilic interactions are implicated in the formation of these clusters within the interfacial tension gradients of a coalescing emulsion. The clusters can be re-suspended in ethanol and water, maximizing the utility of these clusters with an extinction band in the near-Infrared region of the electromagnetic spectrum.

Water-Mediated Assembly of Gold Nanoparticles into Aligned One-Dimensional Superstructures

This Article shows that water in ethanol colloids of gold nanoparticles enhances the formation of linear clusters and, more important for applications in electronics, determines their assembly on surfaces. We show by dynamic light scattering that ethanol colloids contain mainly monomers and dimers and that wormlike superstructures are mostly absent, despite UV-vis evidence of aggregation. Water added to the colloid as a cosolvent was found to enhance the number of clusters as well as their average size, confirming its role in linear self-assembly, on the scale of a few particles. Water adsorbed from the atmosphere during coating was also found to be a powerful lever to tune self-assembly on surfaces. By varying the relative humidity, a sharp transition from branched to linear superstructures was observed, showing the importance of water as a cosolvent in the formation of cluster superstructures. We show that one-dimensional superstructures may form due to long-range mobility of precursor clusters on wet surfaces, allowing their rearrangement. The understanding of the phenomenon allows us to statistically align both clusters and resulting superstructures on patterned substrates, opening the way to rapid screening in molecular electronics.

Flow enhancement of water-based nanoparticle dispersion through microscale sedimentary rocks

Understanding and controlling fluids flow at the microscale is a matter of growing scientific and technological interest. Flow enhancements of water-based nanoparticle dispersions through microscale porous media are investigated through twelve hydrophilic sedimentary rocks with pore-throat radius between 1.2 and 10 μm, which are quantitatively explained with a simple model with slip length correction for Darcy flow. Both as wetting phase, water exhibited no-slip Darcy flow in all cores; however, flow enhancement of nanoparticle dispersions can be up to 5.7 times larger than that of water, and it increases with the decreasing of pore-throat radius. The experimental data reveals characteristic slip lengths are of order 500 and 1000 nm for 3M® and HNPs-1 nanoparticles, respectively, independent of the lithology or nanoparticle concentration or shear rate. Meanwhile, the phenomenon of flow degradation is observed for HNPs-2 nanoparticles. These results explore the feasible application of using nanoparticle dispersions to control flow at the microscale.

Gold nanoparticles with high densities of small protuberances on nanocluster cores with strong NIR extinction

Plasmonic nanoparticles with sizes well below 100 nm and high near infrared (NIR) extinction are of great interest in biomedical imaging.

High interfacial activity of polymers "grafted through" functionalized iron oxide nanoparticle clusters

The mechanism by which polymers, when grafted to inorganic nanoparticles, lower the interfacial tension at the oil-water interface is not well understood, despite the great interest in particle stabilized emulsions and foams. A simple and highly versatile free radical "grafting through" technique was used to bond high organic fractions (by weight) of poly(oligo(ethylene oxide) monomethyl ether methacrylate) onto iron oxide clusters, without the need for catalysts. In the resulting ∼1 μm hybrid particles, the inorganic cores and grafting architecture contribute to the high local concentration of grafted polymer chains to the dodecane/water interface to produce low interfacial tensions of only 0.003 w/v % (polymer and particle core). This "critical particle concentration" (CPC) for these hybrid inorganic/polymer amphiphilic particles to lower the interfacial tension by 36 mN/m was over 30-fold lower than the critical micelle concentration of the free polymer (without inorganic cores) to produce nearly the same interfacial tension. The low CPC is favored by the high adsorption energy (∼10(6) kBT) for the large ∼1 μm hybrid particles, the high local polymer concentration on the particles surfaces, and the ability of the deformable hybrid nanocluster cores as well as the polymer chains to conform to the interface. The nanocluster cores also increased the entanglement of the polymer chains in bulk DI water or synthetic seawater, producing a viscosity up to 35,000 cP at 0.01 s(-1), in contrast with only 600 cP for the free polymer. As a consequence of these interfacial and rheological properties, the hybrid particles stabilized oil-in-water emulsions at concentrations as low as 0.01 w/v %, with average drop sizes down to 30 μm. In contrast, the bulk viscosity was low for the free polymer, and it did not stabilize the emulsions. The ability to influence the interfacial activity and rheology of polymers upon grafting them to inorganic particles, including clusters, may be expected to be broadly applicable to stabilization of emulsions and foams.

Quenched Assembly of NIR-Active Gold Nanoclusters Capped with Strongly Bound Ligands by Tuning Particle Charge via pH and Salinity

Gold nanospheres coated with a binary monolayer of bound citrate and cysteine ligands were assembled into nanoclusters, in which the size and near-infrared (NIR) extinction were tuned by varying the pH and concentration of added NaCl. During full evaporation of an aqueous dispersion of 4.5 ± 1.8 nm Au primary particles, the nanoclusters were formed and quenched by the triblock copolymer polylactic acid (PLA)(1K)-b-poly(ethylene glycol) (PEG)(10K)-b-PLA(1K), which also provided steric stabilization. The short-ranged depletion and van der Waals attractive forces were balanced against longer ranged electrostatic repulsion to tune the nanocluster diameter and NIR extinction. Upon lowering the pH from 7 to 5 at a given salinity, the magnitude of the charge on the primary particles decreased, such that the weaker electrostatic repulsion increased the hydrodynamic diameter and, consequently, NIR extinction of the clusters. At a given pH, as the concentration of NaCl was increased, the NIR extinction decreased monotonically. Furthermore, the greater screening of the charges on the nanoclusters weakened the interactions with PLA(1K)-b-PEG(10K)-b-PLA(1K) and thus lowered the amount of adsorbed polymer on the nanocluster surface. The generalization of the concept of self-assembly of small NIR-active nanoclusters to include a strongly bound thiol and the manipulation of the morphologies and NIR extinction by variation of pH and salinity not only is of fundamental interest but also is important for optical biomedical imaging and therapy.

Synthesis of hetero-nanoclusters: the case of polymer-magnetite systems

Nanoclusters (NCs) composed of nanoparticles (NPs) with different functionalities and having final size in the sub-micrometer range are of great interest for biomedical imaging, drug delivery, sensors, etc. Because some of the functionalities cannot be incorporated into a single NP, e.g., high drug loading combined with strong magnetic properties, here, we present a proof of the concept using an alternative way to combine these properties using different NPs. In particular, starting from polymer and magnetite nanoparticles (MNPs), we produce NCs made out of a statistical distribution of the two components through a process based on aggregation and breakup. The effect of all involved operating parameters, i.e., primary NP size and composition, surfactant type and concentration, and applied hydrodynamic stress on the NC size and internal structure, was systematically investigated using dynamic light scattering (DLS), static light scattering (SLS), and transmission electron microscopy (TEM) analyses. It was found that, by properly tuning the balance between attractive and steric repulsive forces on one side and hydrodynamic stress on the other, NCs as small as 100 nm can be produced. In all cases, the produced NCs have a very compact internal structure characterized by fractal dimension around 2.6. The proposed production strategy to synthesize hetero-NCs composed of mixtures of various primary particles is suitable for the production of multifunctional devices of nanometer size (i.e., approximately 100 nm) for material and biomedical applications.

Protein cluster formation in aqueous solution in the presence of multivalent metal ions--a light scattering study

The formation of protein clusters as precursors for crystallization and phase separation is of fundamental and practical interest in protein science. Using multivalent ions, the strengths of both long-range Coulomb repulsion and short-range attraction can be tuned in protein solutions, representing a well-controlled model system to study static and dynamic properties of clustering during the transition from a charge-stabilized to an aggregate regime. Here, we study compressibility, diffusion, and size of solutes by means of static (SLS) and dynamic light scattering (DLS) in solutions of bovine serum albumin (BSA) and YCl3. For this and comparable systems, an increasing screening and ultimately inversion of the protein surface charge induce a rich phase behavior including reentrant condensation, liquid-liquid phase separation and crystallization, which puts the cluster formation in the context of precursor formation and nucleation of liquid and crystalline phases. We find that, approaching the turbid aggregate regime with increasing salt concentration cs, the diffusion coefficients decrease and the scattered intensity increases by orders of magnitude, evidencing increasing correlation lengths likely associated with clustering. The combination of static and dynamic observations suggests the formation of BSA clusters with a size on the order of 100 nm. The global thermodynamic state seems to be stable over at least several hours. Surprisingly, results on collective diffusion and inverse compressibility from different protein concentrations can be rescaled into master curves as a function of cs/c*, where c* is the critical salt concentration of the transition to the turbid aggregate regime.

Charged gold nanoparticles with essentially zero serum protein adsorption in undiluted fetal bovine serum

The adsorption of even a single serum protein molecule on a gold nanosphere used in biomedical imaging may increase the size too much for renal clearance. In this work, we designed charged ~5 nm Au nanospheres coated with binary mixed-charge ligand monolayers that do not change in size upon incubation in pure fetal bovine serum (FBS). This lack of protein adsorption was unexpected in view of the fact that the Au surface was moderately charged. The mixed-charge monolayers were composed of anionic citrate ligands modified by place exchange with naturally occurring amino acids: either cationic lysine or zwitterionic cysteine ligands. The zwitterionic tips of either the lysine or cysteine ligands interact weakly with the proteins and furthermore increase the distance between the "buried" charges closer to the Au surface and the interacting sites on the protein surface. The ~5 nm nanospheres were assembled into ~20 nm diameter nanoclusters with strong near-IR absorbance (of interest in biomedical imaging and therapy) with a biodegradable polymer, PLA(1k)-b-PEG(10k)-b-PLA(1k). Upon biodegradation of the polymer in acidic solution, the nanoclusters dissociated into primary ~5 nm Au nanospheres, which also did not adsorb any detectable serum protein in undiluted FBS.

Iron oxide nanoparticles grafted with sulfonated copolymers are stable in concentrated brine at elevated temperatures and weakly adsorb on silica

Magnetic nanoparticles that can be transported in subsurface reservoirs at high salinities and temperatures are expected to have a major impact on enhanced oil recovery, carbon dioxide sequestration, and electromagnetic imaging. Herein we report a rare example of steric stabilization of iron oxide (IO) nanoparticles (NPs) grafted with poly(2-acrylamido-2-methylpropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) that not only display colloidal stability in standard American Petroleum Institute (API) brine (8% NaCl + 2% CaCl2 by weight) at 90 °C for 1 month but also resist undesirable adsorption on silica surfaces (0.4% monolayer NPs). Because the AMPS groups interacted weakly with Ca(2+), they were sufficiently well solvated to provide steric stabilization. The PAA groups, in contrast, enabled covalent grafting of the poly(AMPS-co-AA) chains to amine-functionalized IO NPs via formation of amide bonds and prevented polymer desorption even after a 40,000-fold dilution. The aforementioned methodology may be readily adapted to stabilize a variety of other functional inorganic and organic NPs at high salinities and temperatures.

Stabilization of iron oxide nanoparticles in high sodium and calcium brine at high temperatures with adsorbed sulfonated copolymers

A series of sulfonated random and block copolymers were adsorbed on the surface of ~100 nm iron oxide (IO) nanoparticles (NPs) to provide colloidal stability in extremely concentrated brine composed of 8% wt NaCl + 2% wt CaCl2 (API brine; 1.4 M NaCl + 0.2 M CaCl2) at 90 °C. A combinatorial materials chemistry approach, which employed Ca(2+)-mediated adsorption of anionic acrylic acid-containing sulfonated polymers to preformed citrate-stabilized IO nanoclusters, enabled the investigation of a large number of polymer coatings. Initially a series of poly(2-methyl-2-acrylamidopropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) (1:8 to 1:1 mol:mol), poly(styrenesulfonate-block-acrylic acid) (2.4:1 mol:mol), and poly(styrenesulfonate-alt-maleic acid) (3:1 mol:mol) copolymers were screened for solubility in API brine at 90 °C. The ratio of AMPS to AA groups was varied to balance the requirement of colloid dispersibility at high salinity (provided by AMPS) against the need for anchoring of the polymers to the iron oxide surface (via the AA). Steric stabilization of IO NPs coated with poly(AMPS-co-AA) (1:1 mol:mol) provided colloidal stability in API brine at room temperature and 90 °C for up to 1 month. The particles were characterized before and after coating at ambient and elevated temperatures by a variety of techniques including colloidal stability experiments, dynamic light scattering, zeta potential, and thermogravimetric analysis.

Photoacoustic Imaging for Cancer Detection and Staging

Cancer is one of the leading causes of death in the world. Diagnosing a cancer at its early stages of development can decrease the mortality rate significantly and reduce healthcare costs. Over the past two decades, photoacoustic imaging has seen steady growth and has demonstrated notable capabilities to detect cancerous cells and stage cancer. Furthermore, photoacoustic imaging combined with ultrasound imaging and augmented with molecular targeted contrast agents is capable of imaging cancer at the cellular and molecular level, thus opening diverse opportunities to improve diagnosis of tumors, detect circulating tumor cells and identify metastatic lymph nodes. In this paper we introduce the principles of photoacoustic imaging, and review recent developments in photoacoustic imagingas an emerging imaging modality for cancer diagnosis and staging.

Equilibrium gold nanoclusters quenched with biodegradable polymers

Although sub-100 nm nanoclusters of metal nanoparticles are of interest in many fields including biomedical imaging, sensors, and catalysis, it has been challenging to control their morphologies and chemical properties. Herein, a new concept is presented to assemble equilibrium Au nanoclusters of controlled size by tuning the colloidal interactions with a polymeric stabilizer, PLA(1k)-b-PEG(10k)-b-PLA(1k). The nanoclusters form upon mixing a dispersion of ~5 nm Au nanospheres with a polymer solution followed by partial solvent evaporation. A weakly adsorbed polymer quenches the equilibrium nanocluster size and provides steric stabilization. Nanocluster size is tuned from ~20 to ~40 nm by experimentally varying the final Au nanoparticle concentration and the polymer/Au ratio, along with the charge on the initial Au nanoparticle surface. Upon biodegradation of the quencher, the nanoclusters reversibly and fully dissociate to individual ~5 nm primary particles. Equilibrium cluster size is predicted semiquantitatively with a free energy model that balances short-ranged depletion and van der Waals attractions with longer-ranged electrostatic repulsion, as a function of the Au and polymer concentrations. The close spacings of the Au nanoparticles in the clusters produce strong NIR extinction over a broad range of wavelengths from 650 to 900 nm, which is of practical interest in biomedical imaging.

Thermal stability of biodegradable plasmonic nanoclusters in photoacoustic imaging

The photothermal stability of plasmonic nanoparticles is critically important to perform reliable photoacoustic imaging and photothermal therapy. Recently, biodegradable nanoclusters composed of sub-5 nm primary gold particles and a biodegradable polymer have been reported as clinically-translatable contrast agents for photoacoustic imaging. After cellular internalization, the nanoclusters degrade into 5 nm primary particles for efficient excretion from the body. In this paper, three different sizes of biodegradable nanoclusters were synthesized and the optical properties and photothermal stability of the nanoclusters were investigated and compared to that of gold nanorods. The results of our study indicate that 40 nm and 80 nm biodegradable nanoclusters demonstrate higher photothermal stability compared to gold nanorods. Furthermore, 40 nm nanoclusters produce higher photoacoustic signal than gold nanorods at a given concentration of gold. Therefore, the biodegradable plasmonic nanoclusters can be effectively used for photoacoustic imaging and photothermal therapy.

Photophysical probes for multiple-redox and multiple-excited-state interactions in molecular aggregates

Photosynthesis takes place through a highly efficient series of energy, electron, and proton transfers initiated by absorption of one or more photons within the visible region of the solar spectrum. Because of the presence of multiple chromophores needed for effective light harvesting, extinction coefficients must be very high. The absorbing multiunit array is held within a rigidly arranged structure that facilitates each electron hop. A fully artificial, yet biomimetic, alternative to photosynthesis that produces fuels directly and efficiently from sunlight and simple low molecular weight molecules would change the world. Achieving this goal requires a detailed understanding of the mechanisms of the key steps of the complex chemical and photochemical processes taking place in natural photosynthesis. One of these mechanisms relies on light harvesting to initiate multiple-step sequences to obtain combustible molecules suitable for burning. In particular, we are devising and testing photophysical models with characteristics that facilitate multiple electron transfers within a single aggregate and are directly relevant to light harvesting. We focus on structural features that promote photoinduced electron transfer at high dye densities, placed for optimal solar utilization and catalysis. The reaction producing oxygen is further complicated by the need for four electrons to complete the sequence, even though the first initiation step is presumably absorption of a single photon. Therefore we explore steps that accumulate charge or have the potential to do so. We also emphasize the synthesis of model systems that probe the complexity of individual steps. This Account examines the factors that influence the efficiency of electron redistribution in multiple-dye, multiple-excited-state, and multiple-redox equivalent arrays. Such knowledge will allow us to optimize the efficiency of electron migration and may contribute to a better understanding of multiple-equivalent light harvesting events by which photosynthetic energy storage takes place.

Competitive adsorption of thiolated poly(ethylene glycol) and alkane-thiols on gold nanoparticles and its effect on cluster formation

The surface concentration and conformation of thiol-terminated poly(ethylene glycol) (PEG) on gold nanoparticles are studied before and after coadsorption of alkane-thiols. Thermogravimetric analysis (TGA) indicates alkane-thiol ligands will competitively adsorb on gold surfaces of nanoparticles and that the extent of PEG-thiol replacement depends on the specific length of the alkane-thiol molecule. The conformation of the polymer is also affected by the length and packing density of the alkane-thiol. Dynamic light scattering (DLS) shows that the hydrodynamic size of coated particles has an intermediate maximum for the adsorption of octane-thiol, which also forms the most densely packed alkane-thiol monolayers. These two factors greatly impact the formation of clusters by nanoparticle surfactants. Small angle X-ray scattering (SAXS) shows that the largest clusters are formed when particles have a low PEG-thiol surface concentration and an extended PEG conformation.

Review of Long-Wavelength Optical and NIR Imaging Materials: Contrast Agents, Fluorophores and Multifunctional Nano Carriers

The importance of long wavelength and near infra-red (NIR) imaging has dramatically increased due to the desire to perform whole animal and deep tissue imaging. The adoption of NIR imaging is also growing rapidly due to the availability of targeted biological agents for diagnosis and basic medical research that can be imaged in vivo. The wavelength range of 650-1450 nm falls in the region of the spectrum with the lowest absorption in tissue and therefore enables the deepest tissue penetration. This is the wavelength range we focus on with this review. To operate effectively the imaging agents must both be excited and must emit in this long-wavelength window. We review the agents used both for imaging by absorption, scattering, and excitation (such as fluorescence). Imaging agents comprise both aqueous soluble and insoluble species, both organic and inorganic, and unimolecular and supramolecular constructs. The interest in multi-modal imaging, which involves delivery of actives, targeting, and imaging, requires nanocarriers or supramolecular assemblies. Nanoparticles for diagnostics also have advantages in increasing circulation time and increased imaging brightness relative to single molecule imaging agents. This has led to rapid advances in nanocarriers for long-wavelength, NIR imaging.

Concentrated dispersions of equilibrium protein nanoclusters that reversibly dissociate into active monomers

Stabilizing proteins at high concentration is of broad interest in drug delivery, for treatment of cancer and many other diseases. Herein, we create highly concentrated antibody dispersions (up to 260 mg/mL) comprising dense equilibrium nanoclusters of protein (monoclonal antibody 1B7, polyclonal sheep immunoglobulin G, and bovine serum albumin) molecules which, upon dilution in vitro or administration in vivo, remain conformationally stable and biologically active. The extremely concentrated environment within the nanoclusters (∼700 mg/mL) provides conformational stability to the protein through a novel self-crowding mechanism, as shown by computer simulation, while the primarily repulsive nanocluster interactions result in colloidally stable, transparent dispersions. The nanoclusters are formed by adding trehalose as a cosolute which strengthens the short-ranged attraction between protein molecules. The protein cluster diameter was reversibly tuned from 50 to 300 nm by balancing short-ranged attraction against long-ranged electrostatic repulsion of weakly charged protein at a pH near the isoelectric point. This behavior is described semiquantitatively with a free energy model which includes the fractal dimension of the clusters. Upon dilution of the dispersion in vitro, the clusters rapidly dissociated into fully active protein monomers as shown with biophysical analysis (SEC, DLS, CD, and SDS-PAGE) and sensitive biological assays. Since the concept of forming nanoclusters by tuning colloid interactions is shown to be general, it is likely applicable to a variety of biological therapeutics, mitigating the need to engineer protein stability through amino acid modification. In vivo subcutaneous injection into mice results in indistinguishable pharmacokinetics versus a standard antibody solution. Stable protein dispersions with low viscosities may potentially enable patient self-administration by subcutaneous injection of antibody therapeutics being discovered and developed.

Biomedical applications of photoacoustic imaging with exogenous contrast agents

Photoacoustic imaging is a biomedical imaging modality that provides functional information, and, with the help of exogenous contrast agents, cellular and molecular signatures of tissue. In this article, we review the biomedical applications of photoacoustic imaging assisted with exogenous contrast agents. Dyes, noble metal nanoparticles, and other constructs are contrast agents which absorb strongly in the near-infrared band of the optical spectrum and generate strong photoacoustic response. These contrast agents, which can be specifically targeted to molecules or cells, have been coupled with photoacoustic imaging for preclinical and clinical applications ranging from detection of cancer cells, sentinel lymph nodes, and micrometastasis to angiogenesis to characterization of atherosclerotic plaques. Multi-functional agents have also been developed, which can carry drugs or simultaneously provide contrast in multiple imaging modalities. Furthermore, contrast agents were used to guide and monitor the therapeutic procedures. Overall, photoacoustic imaging shows significant promise in its ability to assist in diagnosis, therapy planning, and monitoring of treatment outcome for cancer, cardiovascular disease, and other pathologies.

Stabilization of superparamagnetic iron oxide nanoclusters in concentrated brine with cross-linked polymer shells

Iron oxide nanoparticles, in the form of sub-100-nm clusters, were synthesized in the presence of poly(acrylic acid) (PAA) or poly(styrene sulfonate-alt-maleic acid) (PSS-alt-MA) to provide electrosteric stabilization. The superparamagnetic nanoclusters were characterized using a superconducting quantum interference device (SQUID), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and zeta potential measurements. To anchor the polymer shell on the nanoparticle surface, the polymer was cross-linked for a range of cross-linking densities. For nanoclusters with only 12% (w/w) PSS-alt-MA, electrosteric stabilization was sufficient even in 8 wt % NaCl. For PAA, the cross-linked polymer shell was essentially permanent and did not desorb even upon dilution of the nanoparticles for iron oxide concentrations down to 0.014 wt %. Without cross-linking, over half of the polymer desorbed from the particle surfaces. This general approach of the adsorption of polymer stabilizers onto nanoparticles followed by cross-linking may be utilized for a wide variety of cross-linkable polymers without the need to form covalent bonds between the nanoparticles and polymer stabilizer. Thus, this cross-linking approach is an efficient and inexpensive method of stabilizing nanoparticles for large-scale applications, including the electromagnetic imaging of subsurface reservoirs, even at high salinity.

Role of salt in the spontaneous assembly of charged gold nanoparticles in ethanol

This paper investigates the role of salt in the spontaneous linear assembly of charged gold nanoparticles in ethanol and attempts to clear up a misunderstanding on the role of ethanol in this process. Many prior reports have noted that the addition of ethanol to an aqueous solution of gold nanoparticles causes their aggregation into linear assemblies. It was therefore believed that ethanol plays the determining role during the assembly process. In this work, we carried out systematic studies which indicate that residual salt in conjunction with ethanol, instead of ethanol itself, induces the assembly of gold nanoparticles in ethanol. In the absence of salt, gold nanoparticles can be well dispersed in an ethanol solution. Furthermore, we find that the chainlike assemblies can disassemble upon dilution of the salt or the evaporation of ethanol if the gold nanoparticles are protected with a sufficiently strong ligand.

Energetics of association in poly(lactic acid)-based hydrogels with crystalline and nanoparticle-polymer junctions

We report the energetics of association in polymeric gels with two types of junction points: crystalline hydrophobic junctions and polymer-nanoparticle junctions. Time-temperature superposition (TTS) of small-amplitude oscillatory rheological measurements was used to probe crystalline poly(L-lactide) (PLLA)-based gels with and without added laponite nanoparticles. For associative polymer gels, the activation energy derived from the TTS shift factors is generally accepted as the associative strength or energy needed to break a junction point. Our systems were found to obey TTS over a wide temperature range of 15-70 °C. For systems with no added nanoparticles, two distinct behaviors were seen, with a transition occurring at a temperature close to the glass transition temperature of PLLA, T(g). Above T(g), the activation energy was similar to the PLLA crystallization enthalpy, suggesting that the activation energy is related to the energy needed to pull a PLLA chain out of the crystalline domain. Below T(g), the activation energy is expected to be the energy required to increase mobility of the polymer chains and soften the glassy regions of the PLLA core. Similar behavior was seen in the nanocomposite gels with added laponite; however, the added clay appears to reduce the average value of the activation enthalpy. This confirms our SAXS results and suggests that laponite particles are participating in the network structure.

Utility of biodegradable plasmonic nanoclusters in photoacoustic imaging

Plasmonic metal nanoparticles are used in photoacoustic imaging as contrast agents because of their resonant optical absorption properties in the visible and near-IR regions. However, the nanoparticles could accumulate and result in long-term toxicity in vivo, because they are generally not biodegradable. Recently, biodegradable plasmonic gold nanoclusters, consisting of sub-5 nm primary gold nanoparticles and biodegradable polymer stabilizer, were introduced. In this Letter, we demonstrate the feasibility of biodegradable nanoclusters as a photoacoustic contrast agent. We performed photoacoustic and ultrasound imaging of a tissue-mimicking phantom with inclusions containing nanoclusters at various concentrations. The results indicate that the biodegradable gold nanoclusters can be used as effective contrast agents in photoacoustic imaging.