A Thermosensitive Poly(organophosphazene) Gel

Poly(l-threonine-co-l-threonine Succinate) Thermogels for Sustained Release of Lixisenatide

Negatively charged poly(l-Thr-co-l-Thr succinate) (PTTs) was developed as a new thermogel. Aqueous PTT solutions underwent thermogelation over a concentration range of 6.0-8.3 wt %. Dynamic light scattering, FTIR, 1H NMR, and COSY spectra revealed the partial strengthening of the β-sheet conformation and the dehydration of PTTs during the transition. Extendin-4 was released from the PTTs thermogel with a large initial burst release, whereas positively charged lixisenatide significantly reduced its initial burst release to 25%, and up to 77% of the dose was released from the gel over 14 days. In vivo study revealed a high plasma concentration of lixisenatide over 5 days and hypoglycemic efficacy was observed for type II diabetic rats over 7-10 days. The biocompatible PTTs were degraded by subcutaneous enzymes. This study thus demonstrates an effective strategy for reducing the initial burst release of protein drugs from thermogels with the introduction of electrostatic interactions between the drug and the thermogel.

dl-Polyalanine as a PEG-Free Thermogel

Thermogelling behavior of aqueous polymer solutions comes from the delicate balance between hydrophilic and hydrophobic moieties of the polymer. Typically, poly(ethylene glycol) (PEG) has been used as a hydrophilic block in most thermogels reported to date. However, recent papers have suggested the potential immunogenicity of PEG-conjugated compounds. Here, we report that aqueous solutions of dl-polyalanine (DL-PA) with a specific molecular weight can exhibit thermogelling behavior. In particular, DL-PA with a molecular weight (M_n) of 6690 Da, DL-PA67, exhibited sol-to-gel transition at the physiologically important temperature range of 30-40 °C. ¹H NMR and FTIR data indicated that the mechanism of thermogelation is related to dehydration and conformational changes of DL-PA67 from random coil to β-sheet structures. Subcutaneous injection of an aqueous DL-PA67 solution into rats confirmed the gel formation and its histocompatibility with mild tissue irritation.

PEG-based thermosensitive and biodegradable hydrogels

Injectable thermosensitive hydrogels are free-flowing polymer solutions at low or room temperature, making them easy to encapsulate the therapeutic payload or cells via simply mixing. Upon injection into the body, in situ forming hydrogels triggered by body temperature can act as drug-releasing reservoirs or cell-growing scaffolds. Finally, the hydrogels are eliminated from the administration sites after they accomplish their missions as depots or scaffolds. This review outlines the recent progress of poly(ethylene glycol) (PEG)-based biodegradable thermosensitive hydrogels, especially those composed of PEG-polyester copolymers, PEG-polypeptide copolymers and poly(organophosphazene)s. The material design, performance regulation, thermogelation and degradation mechanisms, and corresponding applications in the biomedical field are summarized and discussed. A perspective on the future thermosensitive hydrogels is also highlighted. STATEMENT OF SIGNIFICANCE: Thermosensitive hydrogels undergoing reversible sol-to-gel phase transitions in response to temperature variations are a class of promising biomaterials that can serve as minimally invasive injectable systems for various biomedical applications. Hydrophilic PEG is a main component in the design and fabrication of thermoresponsive hydrogels due to its excellent biocompatibility. By incorporating hydrophobic segments, such as polyesters and polypeptides, into PEG-based systems, biodegradable and thermosensitive hydrogels with adjustable properties in vitro and in vivo have been developed and have recently become a research hotspot of biomaterials. The summary and discussion on molecular design, performance regulation, thermogelation and degradation mechanisms, and biomedical applications of PEG-based thermosensitive hydrogels may offer a demonstration of blueprint for designing new thermogelling systems and expanding their application scope.

Recent Advances in Injectable Dual Crosslinking Hydrogels for Biomedical Applications

Injectable dual crosslinking hydrogels hold great promise to improve therapeutic efficacy in minimally invasive surgery. Compared with prefabricated hydrogels, injectable hydrogels can be implanted more accurately into deeply enclosed sites and repair irregularly shaped lesions, showing great applicable potential. Here, the current fabrication considerations of injectable dual crosslinking hydrogels are reviewed. Besides, the progress of the hydrogels used in corresponding applications and emerging challenges are discussed, with detailed emphasis in the fields of bone and cartilage regeneration, wound dressings, sensors and other less mentioned applications for their more hopeful employments in clinic. It is envisioned that the further development of the injectable dual crosslinking hydrogels will catalyze their innovation and transformation in the biomedical field.

Injectable Scaffold-Systems for the Regeneration of Spinal Cord: Advances of the Past Decade

Nowadays, whenever is possible and as an alternative to open spine surgery, minimally invasive procedures are preferred to treat spinal cord injuries (SCI), with percutaneous injections or small incisions, that are faster, less traumatic, and require less recovery time. Injectable repair systems are based on materials that can be injected in the lesion site, can eventually be loaded with drugs or even cells, and act as scaffolds for the lesion repair. The review analyzes papers written from 2010 onward on injectable materials/systems used/proposed for the regenerative and combinatorial therapies of SCI and discusses the in vivo models that have been used to validate them.

Alpha-beta transition induced by C18-conjugation of polyalanine and its implication in aqueous solution behavior of poly(ethylene glycol)-polyalanine block copolymers

BACKGROUND

The aqueous solution behavior of thermosensitive PEG-PA block copolymers as well as secondary structure of PA is expected to significantly change through modification of the hydrophobic PA by long chain alkyl (C18) groups with different configurations.

METHOD

Oleoyl and stearoyl (C18) groups were conjugated to poly(ethylene glycol)-poly(L-alanine) (PEG-PA; EG₄₅A₁₆) diblock copolymers to compare their conjugation effect on nano-assemblies and corresponding aqueous solution behavior of the polymers.

RESULTS

Due to the nature of a hydrophilic PEG block and a hydrophobic PA or C18-modified PA, PEG-PA, oleoyl group-conjugated PEG-PA (PEG-PAO), and stearoyl group-conjugated PEG-PA (PEG-PAS) block copolymers form micelles in water. Compared with PEG-PA, the micelle size of PEG-PAO and PEG-PAS increased. Circular dichroism and FTIR spectra of aqueous polymer solutions showed that β sheet content increased, whereas α helix content decreased by C18 modification of PEG-PA. PEG-PAS showed better performance in ice crystallization inhibition than PEG-PAO. The sol-to-gel transition temperatures of aqueous PEG-PAO solutions were 25-37 °C higher than those of aqueous PEG-PA solutions, whereas aqueous PEG-PAS solutions remained as gels in the temperature range of 0-80 °C. ¹H-NMR spectra indicated that the oleoyl groups increased core mobility, whereas stearoyl groups decreased the core mobility of the micelles in water. The difference in micromobility between PAO and PAS interfered or promoted gelation of the aqueous polymer solutions, respectively.

CONCLUSIONS

This study suggests that a hydrophobic C18-modification of polypeptide induces α helix-to-β sheet transition of the polypeptide; however, aqueous solution behaviors including ice recrystallization inhibition and gelation are significantly affected by the nature of the hydrophobic molecule.

Multiscale Experimental Evaluation of Agarose-Based Semi-Interpenetrating Polymer Network Hydrogels as Materials with Tunable Rheological and Transport Performance

This study introduces an original concept in the development of hydrogel materials for controlled release of charged organic compounds based on semi-interpenetrating polymer networks composed by an inert gel-forming polymer component and interpenetrating linear polyelectrolyte with specific binding affinity towards the carried active compound. As it is experimentally illustrated on the prototype hydrogels prepared from agarose interpenetrated by poly(styrene sulfonate) (PSS) and alginate (ALG), respectively, the main benefit brought by this concept is represented by the ability to tune the mechanical and transport performance of the material independently via manipulating the relative content of the two structural components. A unique analytical methodology is proposed to provide complex insight into composition-structure-performance relationships in the hydrogel material combining methods of analysis on the macroscopic scale, but also in the specific microcosms of the gel network. Rheological analysis has confirmed that the complex modulus of the gels can be adjusted in a wide range by the gelling component (agarose) with negligible effect of the interpenetrating component (PSS or ALG). On the other hand, the content of PSS as low as 0.01 wt.% of the gel resulted in a more than 10-fold decrease of diffusivity of model-charged organic solute (Rhodamine 6G).

Smart Hydrogels - Synthetic Stimuli-Responsive Antitumor Drug Release Systems

Among modern drug formulations, stimuli-responsive hydrogels also called "smart hydrogels" deserve a special attention. The basic feature of this system is the ability to change their mechanical properties, swelling ability, hydrophilicity, bioactive molecules permeability, etc., influenced by various stimuli, such as temperature, pH, electromagnetic radiation, magnetic field and biological factors. Therefore, stimuli-responsive matrices can be potentially used in tissue engineering, cell cultures and technology of innovative drug delivery systems (DDSs), releasing the active substances under the control of internal or external stimuli. Moreover, smart hydrogels can be used as injectable DDSs, due to gel-sol transition connected with in situ cross-linking process. Innovative smart hydrogel DDSs can be utilized as matrices for targeted therapy, which enhances the effectiveness of tumor chemotherapy and subsequently limits systemic toxicity. External stimulus sensitivity allows remote control over the drug release profile and gel formation. On the other hand, internal factors provide drg accumulation in tumor tissue and reduce the concentration of active drug form in healthy tissue. In this report, we summarise the basic knowledge and chemical strategies for the synthetic smart hydrogel DDSs applied in antitumor therapy.

Noncovalent and Dynamic Covalent Chemistry Strategies for Driving Thermoresponsive Phase Transition with Multistimuli and Controlled Encapsulation/Release

We report the development of multiresponsive thermally sensitive polymers through both supramolecular and reversible covalent strategies as well as their use in controlled encapsulation and release. Novel acylhydrazone-based dynamic covalent polymers displaying lower critical solution temperature (LCST) or upper critical solution temperature (UCST) were synthesized. A remarkable control over thermal phase transition can be tuned through multimodes, such as anions, cations, solvent, pH, and competing components. In particular, anion recognition allowed disassembly and thus led to a significant decrease of UCST in dimethyl sulfoxide, and the combination of anion and solvent effects offered additional handle for control. Moreover, the use of anions, cations, as well as pH change was employed for the modulation of LCST-type polymer in water. Furthermore, switching on/off thermoresponsiveness was readily achieved by dynamic covalent exchange. Mechanistic studies also shed light on stimuli-induced changes in aggregation behaviors. Finally, thermally controlled encapsulation and release of hydrophobic and hydrophilic dyes were realized with great repeatability and reversibility, respectively, showing potential in delivery and sensing. The results and strategies described should provide opportunities for many aspects, including dynamic assemblies, complex systems, and adaptive materials.

Binding Energetics of Charged Amphiphilic Ligands to Thermoresponsive Biodegradable Poly(methoxyethylaminophosphazene) Hydrogels

Changes in the affinity of the swollen and collapsed forms of a thermoresponsive polymer gel for targeted ligands can be directly estimated using a thermodynamic approach based on high-sensitivity differential scanning calorimetry (HS-DSC). For macromolecular ligands (proteins) bound to the gel, this method provides information on changes in their conformational stability, which is of crucial importance for the biological or pharmaceutical activity of the protein. We used HS-DSC for the study of interactions of two widely administrated drugs-gemfibrozil and ibuprofen-and two globular proteins-α-lactalbumin and BSA-with hydrogels of the cross-linked poly(methoxyethylaminophosphazene). The gel collapse resulted in a substantial increase in the gel affinity for the drugs. We obtained quantitative estimations of the affinity of the collapsed gels depending on the gel structure, pH, concentration of NaCl, and phosphate buffer (an inductor of the thermoresponsivity). The gels retained a high affinity for the drugs in the near-physiological conditions (ionic composition and pH). The binding curves of globular proteins to the gels in the swollen and collapsed states were obtained. The different proteins demonstrated the preferential binding to the swollen or collapsed state of the gels, presumably depending on the protein surface hydrophobicity. The proteins bound to the gel subchains retain their native tertiary structure and, therefore, maintain their functionality when immobilized in the polyphosphazene hydrogels.

3D hydrogel stem cell niche controlled by host-guest interaction affects stem cell fate and survival rate

Host-guest interaction using β-cyclodextrin (β-CD) and adamantane (Ad) allows facile modulation of guest molecule concentration in 3D hydrogels. Based on this phenomenon, we prepared a thermosensitive poly(organophosphazene) bearing β-CD hydrogel (β-CD PPZ, as host) and Ad-Arg-Gly-Asp (Ad-RGD, as guest). The structures of synthesized thermosensitive β-CD PPZ and Ad-RGD were confirmed by ¹H NMR and FT-IR. The β-CD PPZ/Ad-RGD mixture was prepared by simple mixing and elicited thermosensitive properties with the formation of gelation in all Ad-RGDs mixing proportions at the body temperature. Strong and controlled host-guest interactions between β-CD PPZ and Ad-RGD were observed in 2D-NOESY, DLS, and TEM. Regulated MSC behaviors were elicited based on the use of controlled Ad-RGD amounts at the level of in vitro and in vivo. As the amount of Ad-RGD was increased in the β-CD PPZ hydrogel, MSC survival rate was enhanced and was prone to express osteogenic factors. While Ad-RGD is absent or low in hydrogel, relatively poor MSC survival rate and adipogenesis were exhibited. Altogether, we verified that survival rate and differentiation of MSCs could be controlled by host-guest interaction system with thermosensitive 3D hydrogel. This proposed 3D hydrogel controlling system with host-guest interaction is expected to be a platform technology as changing guest molecules.

Biodegradable Cyclomatrix Polyphosphazene Nanoparticles: A Novel pH-Responsive Drug Self-Framed Delivery System

Traditional drug delivery systems suffer from low drug-loading and relatively weak therapeutic efficacy, therefore, development of new drug delivery systems with high-efficiency has become more urgent. In this report, a novel-innovative drug delivery strategy, namely drug self-framed delivery system (DSFDS), is prepared via using anticancer drugs as polymer frame without using any carriers. The drug molecules (exemplified by doxorubicin) containing more than two nucleophilic functional groups (diols/diamines) directly reacted with hexachlorocyclotriphosphazene via mild precipitation polycondensation under ambient conditions, forming biocompatible drug self-framed delivery nanoparticles. Because of the covalent bonding of the drug molecules, DSFD nanoparticles (DSFDs) with super high drug-loading were stable in the circulation during delivery. However, sustained release of drug in the acidic environment within cells endowed DSFDs with long-term anticancer therapeutic efficacy. This strategy is applicable for diverse hydrophilic and hydrophobic drugs and may be a new platform for designing high drug-loading and release-controllable drug delivery systems.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

An injectable hydrogel enhances tissue repair after spinal cord injury by promoting extracellular matrix remodeling

The cystic cavity that develops following injuries to brain or spinal cord is a major obstacle for tissue repair in central nervous system (CNS). Here we report that injection of imidazole-poly(organophosphazenes) (I-5), a hydrogel with thermosensitive sol–gel transition behavior, almost completely eliminates cystic cavities in a clinically relevant rat spinal cord injury model. Cystic cavities are bridged by fibronectin-rich extracellular matrix. The fibrotic extracellular matrix remodeling is mediated by matrix metalloproteinase-9 expressed in macrophages within the fibrotic extracellular matrix. A poly(organophosphazenes) hydrogel lacking the imidazole moiety, which physically interacts with macrophages via histamine receptors, exhibits substantially diminished bridging effects. I-5 injection improves coordinated locomotion, and this functional recovery is accompanied by preservation of myelinated white matter and motor neurons and an increase in axonal reinnervation of the lumbar motor neurons. Our study demonstrates that dynamic interactions between inflammatory cells and injectable biomaterials can induce beneficial extracellular matrix remodeling to stimulate tissue repair following CNS injuries.

The cystic cavity that develops following injuries to brain or spinal cord is a major obstacle. Here the authors show an injection of imidazole poly(organophosphazenes), a hydrogel with thermosensitive sol–gel transition behavior, almost completely eliminates cystic cavities in a clinically relevant rat spinal cord injury model.

α,ω-Diphenylalanine-End-Capping of PEG-PPG-PEG Polymers Changes the Micelle Morphology and Enhances Stability of the Thermogel

Pluronics F127 (P, PEG-PPG-PEG triblock copolymer) was coupled with diphenylalanine (FF) to prepare FF-end-capped Pluronics (FFPFF). With increasing temperature from 10 to 60 °C, the FFPFF self-assembled to vesicles in water. The unimer-to-vesicle transition accompanies endothermic enthalpy of 53.9 kcal/mol. Aqueous P and FFPFF solutions exhibited thermogelation in 15.0-24.0 wt %. The gel phase of FFPFF was stable up to 90 °C, whereas that of P turned into a sol again at 55-86 °C, indicating that end-capping with FF improved the gel stability against heat. In addition, the carboxylic acids of the FF end-groups can form coordination bonds with metal ions, and the gel modulus at 37 °C increased from 15-21 KPa (P) to 20-25 KPa (FFPFF) to 24-28 KPa (FFPFF-Zn), and the duration of gel against water-erosion increased from 24 h (P) to 60 h (FFPFF-Zn), leading to a useful biomaterial for sustained drug delivery. The FFPFF-Zn gels implanted in the rats' subcutaneous layer induced a mild inflammatory responses. Contrary to the previous end-capping of Pluronics by poly(lactic acid), polycarprolactone, carboxylic acid, and so on that weakened the gel stability, the diphenylalanine end-capping strengthened the stability of Pluronics gel against heat and water-erosion. This paper suggests that the control of polymer nanoassemblies directed by FF end-groups improves the mechanical properties and stability of the resulting thermogel and, thus, provides a useful drug delivery carrier with prolonged durability.

Thermo- and pH-Responsive, Coacervate-Forming Hyperbranched Poly(β-amino ester)s for Selective Cell Binding

We report a new type of thermo- and pH-responsive, coacervate-forming highly degradable polymer-hyperbranched poly(β-amino esters) (HPAEs) and its selective cell binding behaviors. The HPAEs were synthesized from 5-amino-1-pentanol (S5) and trimethylolpropane ethoxylate triacrylate (TMPETA) via an A2+B3 type Michael addition. The existence of multiple hydrogen bond pairs as well as tertiary amines makes the S5-TMPETA polymers manifest temperature- and pH-dependent phase transition. By varying the length of the ethylene glycol (EG) spacers in the TMPETA, polymer molecular weight, concentration, and pH value, the phase transition of the S5-TMPETA can be easily tuned in aqueous and buffer solutions, as evidenced by UV-vis spectroscopy and DLS measurements. Especially, the S5-TMPETA prepared from S5 and trimethylolpropane ethoxylate triacrylate 692 (S5-TMPETA692) shows a lower critical solution temperature (LCST) around 33 °C, above which the S5-TMPTEA can form coacervate particles able to encapsulate functional molecules effectively. Importantly, when incubation with HeLa cells, the S5-TMPTETA692 exhibits a temperature- and pH-responsive selective cell binding behaviors. In addition, the S5-TMPETA are highly hydrolyzable and elicit negligible cytotoxicity. This new type of "smart" polymer should find use in a variety of biomedical applications.

Synthesis of polyphosphazenes with different side groups and various tactics for drug delivery

Polyphosphazenes (PPZs) are hybrid polymers comprising a main chain containing nitrogen and phosphorous linked through interchanging single and double bonds, and side chains.

Hydrogel-Based Drug Delivery Systems for Poorly Water-Soluble Drugs

Hydrogels are three-dimensional materials that can withstand a great amount of water incorporation while maintaining integrity. This allows hydrogels to be very unique biomedical materials, especially for drug delivery. Much effort has been made to incorporate hydrophilic molecules in hydrogels in the field of drug delivery, while loading of hydrophobic drugs has not been vastly studied. However, in recent years, research has also been conducted on incorporating hydrophobic molecules within hydrogel matrices for achieving a steady release of drugs to treat various ailments. Here, we summarize the types of hydrogels used as drug delivery vehicles, various methods to incorporate hydrophobic molecules in hydrogel matrices, and the potential therapeutic applications of hydrogels in cancer.

Microsphere-Incorporated Hybrid Thermogel for Neuronal Differentiation of Tonsil Derived Mesenchymal Stem Cells

Neuronal differentiation of tonsil-derived mesenchymal stem cells (TMSCs) is investigated in a 3D hybrid system. The hybrid system is prepared by increasing the temperature of poly(ethylene glycol)-poly(l-alanine) aqueous solution to 37 °C through the heat-induced sol-to-gel transition, in which TMSCs and growth factor releasing microspheres are suspended. The in situ formed gel exhibits a modulus of 800 Pa at 37 °C, similar to that of brain tissue, and it is robust enough to hold the microspheres and cells during the 3D culture of TMSCs. The neuronal growth factors are released over 12-18 d, and the TMSCs in a spherical shape initially undergo multipolar elongation during the 3D culture. Significantly higher expressions of the neuronal biomarkers such as nuclear receptor related protein (Nurr-1), neuron specific enolase, microtubule associated protein-2, neurofilament-M, and glial fibrillary acidic protein are observed in both mRNA level and protein level in the hybrid systems than in the control experiments. This study proves the significance of a controlled drug delivery concept in tissue engineering or regenerative medicine, and a 3D hybrid system with controlled release of growth factors from microspheres in a thermogel can be a very promising tool.

Sustained BMP-2 delivery and injectable bone regeneration using thermosensitive polymeric nanoparticle hydrogel bearing dual interactions with BMP-2

Localized and continuous osteogenic stimulation to defected sites is required for effective bone regeneration. Here, we suggest an injectable and sustained bone morphogenetic protein-2 (BMP-2) release system using thermosensitive polymeric nanoparticles bearing dual interacting forces with BMP-2. For sustained BMP-2 release, hydrophobic and ionic interactions were introduced to thermosensitive poly(phosphazene). Hydrophobic isoleucine ethyl ester and hydrophilic poly-ethylene glycol were mainly substituted to the poly(phosphazene) back bone for amphiphilicity and hydrophobic interaction with BMP-2. Carboxylic acid moiety was additionally substituted to the back bone for ionic interaction with BMP-2. These dual interacting polymeric nanoparticles (D-NPs) formed compact nanocomplexes with BMP-2. The aqueous solution of BMP-2/D-NP nanocomplexes was transformed to hydrogel when the temperature of the solution increased. Loaded BMP-2 was sustain-released for three weeks from the BMP-2/D-NP nanocomplex hydrogel. The extended BMP-2 exposure caused higher osteocalcin secretion in C2C12 cells. Significant bone generations were observed at the target site by single injection of BMP-2/D-NP nanocomplexes in vivo.

Injectable and cross-linkable polyphosphazene hydrogels for space-filling scaffolds

Injectable and cross-linkable polyphosphazene hydrogel for space-filling scaffolds.

Unusual thermogelling behaviour of poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA)-based polymers polymerized in bulk

The bulk synthesis of (PDMAEMA)-based polymers and their unusual thermoreversible gelation in aqueous solutions are described.

Stimuli-Responsive Materials for Controlled Release of Theranostic Agents

Stimuli-responsive materials are so named because they can alter their physicochemical properties and/or structural conformations in response to specific stimuli. The stimuli can be internal, such as physiological or pathological variations in the target cells/tissues, or external, such as optical and ultrasound radiations. In recent years, these materials have gained increasing interest in biomedical applications due to their potential for spatially and temporally controlled release of theranostic agents in response to the specific stimuli. This article highlights several recent advances in the development of such materials, with a focus on their molecular designs and formulations. The future of stimuli-responsive materials will also be explored, including combination with molecular imaging probes and targeting moieties, which could enable simultaneous diagnosis and treatment of a specific disease, as well as multi-functionality and responsiveness to multiple stimuli, all important in overcoming intrinsic biological barriers and increasing clinical viability.

Thermoresponsive hydrogels for cellular delivery

The delivery of living cells into a host body has emerged as a promising approach to treating a variety of different diseases and for tissue repair. However, one of the major obstacles for clinical success is to deliver the cells to the target tissue without losing control of cell fate and function after transplantation. Temperature-responsive biomaterials represent a promising vehicle to deliver cells noninvasively by injection of a liquid precursor, which undergoes a reversible phase transition at body temperature, thus, forming temperature-induced hydrogels in situ. The final material provides transplanted cells with a synthetic extracellular matrix, which retains the cells at the injection site, supports cell growth and mitigates migration. This mini review is intended to cover the fundamental physicochemical characteristics of these thermoresponsive biomaterials, and to examine the applications, with a focus on the recently developed cell-delivery systems for tissue engineering and cell therapy, including advantages, limitations and future challenges.

New directions in thermoresponsive polymers

Interest in thermoresponsive polymers has steadily grown over many decades, and a great deal of work has been dedicated to developing temperature sensitive macromolecules that can be crafted into new smart materials. However, the overwhelming majority of previously reported temperature-responsive polymers are based on poly(N-isopropylacrylamide) (PNIPAM), despite the fact that a wide range of other thermoresponsive polymers have demonstrated similar promise for the preparation of adaptive materials. Herein, we aim to highlight recent results that involve thermoresponsive systems that have not yet been as fully considered. Many of these (co)polymers represent clear opportunities for advancements in emerging biomedical and materials fields due to their increased biocompatibility and tuneable response. By highlighting recent examples of newly developed thermoresponsive polymer systems, we hope to promote the development of new generations of smart materials.

Design of Biodegradable Injectable Polymers Exhibiting Temperature-Responsive Sol-Gel Transition

Starburst triblock copolymers consisting of 8-arm poly(ethylene glycol) (8-arm PEG), poly(L-lactide) (PLLA) or its enantiomer poly(D-lactide) (PDLA) and terminal PEG, 8-arm PEG-b-PLLA-b-PEG (Stri-L) and 8-arm PEG-b- PDLA-b-PEG (Stri-D), were synthesized. An aqueous solution of a 1:1 mixture (Stri-Mix) of Stri-L and Stri-D assumed a sol state at room temperature, but instantaneously formed a physically cross-linked hydrogel in response to increasing temperature. The resulting hydrogel exhibited a high storage modulus at 37 °C. The rapid temperature-triggered hydrogel formation, high mechanical strength, and degradation behavior render this polymer system suitable for use in injectable drug delivery system or a biodegradable scaffold for tissue engineering.

Injectable polyplex hydrogel for localized and long-term delivery of siRNA

Here, we describe a concept for localized and long-term delivery of short interfering RNA (siRNA) using an injectable polyplex hydrogel possessing thermosensitivity and biodegradability properties. We prepared a low molecular weight polyethyleneimine-poly(organophosphazene) conjugate as a thermosensitive and cationic polymer that has a cleavable ester linkage. The conjugates formed about 100 nm sized polyplexes with siRNAs, and the polyplex solution turned into a polyplex hydrogel at body temperature via a hydrophobic interaction. We injected the polyplex hydrogel with siRNA of cyclin B1, an essential protein for controlling the cell cycle, into the tumor xenograft model. Polyplexes were slowly released from the polyplex hydrogel by dissolution and degradation, allowing an in vivo antitumor effect via cyclin B1 gene silencing for 4 weeks with only a single injection.