Facile Synthesis of Zwitterionic Diblock Copolymers without Protecting Group Chemistry

Synthesis of polyampholytic diblock copolymers via RAFT aqueous solution polymerization

Two new classes of polyampholytic diblock copolymers are prepared via RAFT aqueous solution polymerization and their aqueous solution behaviour is assessed using 1H NMR spectroscopy, dynamic light scattering and aqueous electrophoresis measurements.

Codelivery of Anti-PD-1 Antibody and Paclitaxel with Matrix Metalloproteinase and pH Dual-Sensitive Micelles for Enhanced Tumor Chemoimmunotherapy

Immune checkpoint blockade (ICB) is demonstrating great potential in cancer immunotherapy nowadays. Yet, the low response rate to ICB remains an urgent challenge for tumor immunotherapy. A pH and matrix metalloproteinase dual-sensitive micellar nanocarrier showing spatio-temporally controlled release of anti-PD-1 antibody (aPD-1) and paclitaxel (PTX) in solid tumors is prepared to realize synergistic cancer chemoimmunotherapy. Antitumor immunity can be activated by PTX-induced immunogenic cell death (ICD), while aPD-1 blocks the PD-1/PD-L1 axis to suppress the immune escape due to PTX-induced PD-L1 up-regulation, thus resulting in a synergistic antitumor chemoimmunotherapy. Through decoration with a sheddable polyethylene glycol (PEG) shell, the nanodrug may better accumulate in tumors to boost the synergistic antitumor treatment in a mouse melanoma model. The present study demonstrates a potent antitumor chemoimmunotherapy utilizing tumor microenvironment-sensitive micelles bearing a sheddable PEG layer to mediate site-specific sequential release of aPD-1 and PTX.

Protonation-induced molecular permeation at the oil/water interface in an electric field

As a common physicochemical phenomenon, protonation can cause molecules, atoms or ions with lone-pair electrons to become charged, and can further cause some changes in their physical and chemical properties. Our study first focused on the molecular protonation process and accompanying transitions of the oil/water interface properties in an electric field. The relationship between the protonation degree increment and applied voltage was proposed as a guide for controlling the protonation via applying an electric field. Besides the protonation degree, the water solubility of the oily target molecule obviously increased at 30 V for 600 s along with electric field-driven protonation. At the same time, the electrical conductivity and the underwater interface wettability of oil phase transitioned. These property transitions are anticipated to guide the further improvement and updating of promising protonation functions.

A perfect stimuli-responsive magnetic nanocomposite for intracellular delivery of doxorubicin

Iron oxide nanoparticles (IONs) have been extensively applied in cancer therapy and theranostics due to their admissible magnetic properties, excellent chemical stability and biocompatibility. Herein, a novel stimuli-responsive magnetic nanocomposite was synthesized for cancer therapy; thereby, the triblock copolymer of poly[(2-succinyloxyethylmethacrylate)-b-(N-isopropylacrylamide)-b-dimethylaminoethylmethacrylate) [poly(SEMA-b-NIPAM-b-DMAEMA)] was prepared by reversible addition of fragmentation chain transfer (RAFT) polymerization. This triblock copolymer with carboxylic groups of succinyloxyethylmethacrylate was adsorbed onto the surface of Fe₃O₄ nanoparticles. The morphology, nanocomposite properties and stimuli-responsive behaviours were investigated by field emission scanning electron microscopy, X-ray diffraction, dynamic light scattering, vibrating sample magnetometer (VSM) and thermogravimetric analysis. Doxorubicin (DOX) encapsulation efficacy was 94.3%. Release behaviours of DOX from the magnetic nanocomposite exhibited that the rate of DOX release could be efficiently controlled through temperature and pH. The cytotoxicity of the drug was investigated in vitro against breast cancer cell line (MCF7) using (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assays, 4',6-diamidino-2-phenylindole (DAPI) staining and cellular uptake. In conclusion, the synthesized DOX@nanocomposite can be applied in theranostic applications and anticancer drug delivery owing to admissible properties.

pH-Responsive Schizophrenic Diblock Copolymers Prepared by Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is used for the highly convenient and efficient preparation of ampholytic diblock copolymer nanoparticles directly in acidic aqueous solution. Cationic nanoparticles comprising a protonated polyamine stabilizer block and a hydrophobic polyacid core-forming block are formed at pH 2. Micelle inversion occurs at pH 10 to produce anionic nanoparticles with an ionized polyacid stabilizer block and a hydrophobic polyamine core-forming block. Macroscopic precipitation occurs at around pH 6-7, which lies close to the isoelectric point of this ampholytic diblock copolymer. Incorporation of fluorescein and rhodamine dye labels into the acid and amine blocks, respectively, leads to dual-color bifluorescent self-reporting pH-responsive nanoparticles.

Schizophrenic poly(ε-caprolactone)s: synthesis, self-assembly and fluorescent decoration

Double hydrophilic copolymers PCCL-b-PPIL and their pyrene-modified copolymers showed pH-responsive “schizophrenic” aggregation behaviors.

Novel dual stimuli-responsive ABC triblock copolymer: RAFT synthesis, "schizophrenic" micellization, and its performance as an anticancer drug delivery nanosystem

A novel pH- and thermo-responsive ABC triblock copolymer {poly[(2-succinyloxyethyl methacrylate)-b-(N-isopropylacrylamide)-b-[(N-4-vinylbenzyl),N,N-diethylamine]]} [P(SEMA-b-NIPAAm-b-VEA)] was successfully synthesized via reversible addition of fragmentation chain transfer (RAFT) polymerization technique. The molecular weights of PHEMA, PNIPAAm, and PVEA segments in the synthesized triblock copolymer were calculated to be 10,670, 6140, and 9060gmol^-1, respectively, from proton nuclear magnetic resonance (¹H NMR) spectroscopy. The "schizophrenic" self-assembly behavior of the synthesized P(SEMA-b-NIPAAm-b-VEA) triblock copolymer under pH and thermal stimulus were investigated by means of ¹H NMR and ultraviolet-visible (UV-vis) spectroscopies as well as dynamic light scattering (DLS) and zeta potential (ξ) measurements. The doxorubicin hydrochloride (DOX)-loading capacity, and stimuli-responsive drug release ability of the synthesized triblock copolymer were also investigated. The biocompatibility of the synthesized triblock copolymer was confirmed through the assessing survival rate of breast cancer cell line (MCF7) using MTT assay. In contrast, DOX-loaded triblock copolymer exhibited an efficient anticancer performance in comparison with free DOX verified by MTT and DAPI staining assays. As the results, we envision that the synthesized P(SEMA-b-NIPAAm-b-VEA) triblock copolymer can be applied as an enhanced anticancer drug delivery nanosystem, mainly due to its smart physicochemical and biocompatibility properties.

Novel 'schizophrenic' diblock copolymer synthesized via RAFT polymerization: poly(2-succinyloxyethyl methacrylate)-b-poly[(N-4-vinylbenzyl),N,N-diethylamine]

This article describes the synthesis and characterization of a novel 'schizophrenic' diblock copolymer [poly(2-succinyloxyethyl methacrylate)-b-poly[(N-4-vinylbenzyl),N,N-diethylamine)]; PSEMA-b-PVEA] via reversible addition of fragmentation chain transfer (RAFT) polymerization technique. The chemical structures of all samples as representatives were characterized by means of Fourier transform infrared (FTIR), and 1H nuclear magnetic resonance (NMR) spectroscopies. The molecular weights of PHEMA and PVEA segments were calculated to be 9770 and 12,630 gmol-1, respectively, from 1H NMR spectroscopy. The self-assembly behavior of the synthesized PSEMA-b-PVEA diblock copolymer was investigated by means of 1H NMR spectroscopy, dynamic light scattering (DLS) measurements, and transmission electron microscopy (TEM) observation. The average sizes of the PSEMA-b-PVEA micelles at pHs 3.0, 6.0, and 10.0 were obtained to be 294, 237, and 201 nm, respectively, from DLS analysis. The zeta potential measurements at various pHs demonstrated that the synthesized PSEMA-b-PVEA diblock copolymer has zwitterionic properties, and the range of isoelectric point's (IEP's) was determined as 5.8-7.3. It is expected that the synthesized PSEMA-b-PVEA diblock copolymer considered as a prospective candidate in nanomedicine applications such as drug delivery, mainly due to its excellent 'schizophrenic' micellization behavior.

Multi-Stimuli-Responsive Polymeric Materials

Stimuli-responsive materials are of immense importance because of their ability to undergo alteration of their properties in response to their environment. The properties of such materials can be tuned by subtle adjustments in temperature, pH, light, and so forth. Among such smart materials, multi-stimuli-responsive polymeric materials are of pronounced significance as they offer a wide range of applications and their properties can be tuned through several mechanisms. Here, we aim to highlight some recent studies showcasing the multi-stimuli-responsive character of these polymers, which are still relatively little known compared to their single-stimuli-responsive counterpart.

Recent progress in designing shell cross-linked polymer capsules for drug delivery

This tutorial review highlights the progress made during recent years in the development of the shell cross-linked (SCL) polymer nanocapsules and the impact of the most important scientific ideas on this field of knowledge.

Synthesis of a doubly thermo-responsive schizophrenic diblock copolymer based on poly[N-(4-vinylbenzyl)-N,N-diethylamine] and its temperature-sensitive flip-flop micellization

A doubly thermo-responsive schizophrenic diblock copolymer, poly(tert-butyl methacrylate)-block-poly[N-(4-vinylbenzyl)-N,N-diethylamine], was synthesized and its flip-flop micellization was demonstrated.

Effect of colloidal substrate curvature on pH-responsive polyelectrolyte brush growth

Coatings consisting of polymer brushes are an effective way to modify solid interfaces. Polymer brush-modified hybrid particles have been prepared by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP) of 2-(diethylamino)ethyl methacrylate (DEA) on silica particles. We have optimized the synthesis with respect to changing the reducing agent, temperature, and reaction solvent from an aqueous ethanol mixture to an aqueous methanol mixture. Our flexible electrostatically adsorbed macroinitiator approach allows for the modification of a variety of surfaces. Polybasic brushes have been grown on silica particles of different sizes, from 120 to 840 nm in diameter, as well as on wafers, and a comparison of the products has allowed the effect of surface curvature to be elucidated. An examination of the thickness of the dry brush and the aqueous hydrodynamic brush at both pH 7 and at 4 demonstrated that growth increased substantially with substrate curvature for particles with a diameter below 450 nm. This is attributed to the increasing separation between active chain ends, reducing the rate of termination. This is believed to be the first time that this effect has been demonstrated experimentally. Furthermore, we have seen that polymer brush growth on planar wafers was significantly reduced when the reaction mixture was stirred.

pH-Responsive Brush-Modified Silica Hybrids Synthesized by Surface-Initiated ARGET ATRP

Brush-modified silica hybrids have been synthesized by growing poly(2-(diethylamino)ethyl methacrylate) (poly(DEA)) brushes on 120 nm diameter silica particles by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). This is the first report of using SI-ARGET ATRP to synthesize poly(DEA) brushes. The kinetics of poly(DEA) brush growth in 4:1 v/v ethanol/water was monitored. The hydrodynamic diameter of the resulting brush-modified particles was dependent on the solution pH due to the weak polybasic nature of the brushes. Below the pK_a of poly(DEA), the hydrodynamic diameter of the brush-modified particles increased with decreasing pH as a consequence of brush protonation, rearrangement and solvent uptake. This pH-response of the brushes was reversible and the hybrid particles exhibited significant hydrodynamic volume changes of up to 200% when the solution pH was cycled from pH 7 to pH 4.

Synthesis and characterization of novel polyacid-stabilized latexes

A series of novel polyacid macromonomers based on 2-hydroxypropyl methacrylate (HPMA) were prepared by atom transfer radical polymerization (ATRP) via a two-step route. First, a range of well-defined PHPMA homopolymer precursors were synthesized by ATRP using a tertiary amine-functionalized initiator, 2-(dimethylamino)ethyl-2-bromoisobutyrylamide, and a CuCl/2, 2'-bipyridine (bpy) catalyst in alcoholic media at 50 °C. ATRP polymerizations were relatively slow and poorly controlled in pure isopropanol (IPA), especially when targeting higher degrees of polymerization (DP > 30). Improved control was achieved by addition of water: low polydispersity (M(w)/M(n) < 1.25) PHPMA homopolymers of DP = 30, 40, 50, 60, or 70 were successfully prepared using a 9:1 w/w % IPA/water mixture at 50 °C. These PHPMA homopolymer precursors were then derivatized to produce the corresponding poly(2-(succinyloxy)propyl methacrylate) (PSPMA) macromonomers by quaternizing the tertiary amine end-group with excess 4-vinylbenzyl chloride, followed by esterification of the pendent hydroxyl groups using excess succinic anhydride at 20 °C. These polyacid macromonomers were evaluated as reactive steric stabilizers for polystyrene latex synthesis under either aqueous emulsion polymerization or alcoholic dispersion polymerization conditions. Near-monodisperse polystyrene latexes were obtained via aqueous emulsion polymerization using 10 wt % PSPMA macromonomer (with respect to styrene monomer) with various initiators as evidenced by scanning electron microscopy, disk centrifuge photosedimentometry and light scattering studies. PSPMA macromomer concentrations as low as 1.0 wt % also produced near-monodisperse latexes, suggesting that these PSPMA macromonomers are highly effective stabilizers. Alcoholic dispersion polymerization of styrene conducted in various ethanol/water mixtures with 10 wt % PSPMA(50) macromonomer produced relatively large near-monodisperse latexes. Increasing the water content in such formulations led to smaller latexes, as expected. Control experiments conducted with 10 wt % PSPMA(50) homopolymer produced relatively large polydisperse latexes via emulsion polymerization and only macroscopic precipitates via alcoholic dispersion polymerization. Thus the terminal styrene group on the macromonomer chains is essential for the formation of well-defined latexes. FT-IR spectroscopy indicated that these latexes contained PSPMA macromonomer, whereas (1)H NMR spectroscopy studies of dissolved latexes allowed stabilizer contents to be determined. Aqueous electrophoresis and X-ray photoelectron spectroscopy studies confirmed that the PSPMA macromonomer chains were located at the latex surface, as expected. Finally, these polyacid-stabilized polystyrene latexes exhibited excellent freeze-thaw stability and remained colloidally stable in the presence of electrolyte.

pH-Triggered reversible morphological inversion of orthogonally-addressable poly(3-acrylamidophenylboronic acid)-block-poly(acrylamidoethylamine) micelles and their shell crosslinked nanoparticles

Functionally-responsive amphiphilic core-shell nanoscopic objects, capable of either complete or partial inversion processes, were produced by the supramolecular assembly of pH-responsive block copolymers, without or with covalent crosslinking of the shell layer, respectively. A new type of well-defined, dual-functionalized boronic acid- and amino-based diblock copolymer poly(3-acrylamidophenylboronic acid)(30)-block-poly(acrylamidoethylamine)(25) (PAPBA(30)-b-PAEA(25)) was synthesized by sequential reversible addition-fragmentation chain transfer (RAFT) polymerization and then assembled into cationic micelles in aqueous solution at pH 5.5. The micelles were further cross-linked throughout the shell domain comprised of poly(acrylamidoethylamine) by reaction with a bis-activated ester of 4,15-dioxo-8,11-dioxa-5,14-diazaoctadecane-1,18-dioic acid, upon increase of the pH to 7, to different cross-linking densities (2%, 5% and 10%), forming well-defined shell cross-linked nanoparticles (SCKs) with hydrodynamic diameters of ca. 50 nm. These smart micelles and SCKs presented switchable cationic, zwitterionic and anionic properties, and existed as stable nanoparticles with high positive surface charge at low pH (pH = 2, zeta potential ~ +40 mV) and strong negative surface charge at high pH (pH = 12, zeta potential ~ -35 mV). (1)H NMR spectroscopy, X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), transmission electron microscopy (TEM), atomic force microscopy (AFM), and zeta potential, were used to characterize the chemical compositions, particle sizes, morphologies and surface charges. Precipitation occurred near the isoelectric points (IEP) of the polymer/particle solutions, and the IEP values could be tuned by changing the shell cross-linking density. The block copolymer micelles were capable of full reversible morphological inversion as a function of pH, by orthogonal protonation of the PAEA and hydroxide association with the PAPBA units, whereas the SCKs underwent only reptation of the PAPBA chain segments through the crosslinked shell of PAEA as the pH was elevated. Further, these nanomaterials also showed D-glucose-responsive properties.

Synthesis of rhodamine 6G-based compounds for the ATRP synthesis of fluorescently labeled biocompatible polymers

Facile derivatization of rhodamine 6G in the 2' position by direct reaction with secondary amines is reported. If the secondary amine contains a hydroxy group, the hydroxyl-functional intermediate can be readily esterified to give either fluorescent initiators for atom transfer radical polymerization (ATRP) or a fluorescent methacrylic comonomer. In contrast to rhodamine dyes functionalized using primary amines, which are only fluorescent at low pH, these compounds are highly fluorescent at physiological pH. These new compounds were subsequently used to prepare a range of fluorescently labeled biocompatible polymers based on the biomimetic monomer, 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), for biomedical studies.

In situ growth of side-chain PEG polymers from functionalized human growth hormone-a new technique for preparation of enhanced protein-polymer conjugates

The application of atom transfer radical polymerization (ATRP) for preparation of a novel class of protein-polymer bioconjugates is described, exemplified by the synthesis of a recombinant human growth hormone (rh-GH) poly(ethylene glycol) methyl ether methacrylate (PEGMA) hybrid. The rh-GH protein was activated via a bromo-ester functionalized linker and used as a macroinitiator to polymerize the hydrophilic monomer PEGMA under solely aqueous conditions at 4 degrees C. ATRP conditions resulted in controlled polymer growth from rh-GH with low-polydispersity polyPEGMA chains. The rh-GH PEGMA product exhibited properties consistent with the presence of attached hydrophilic polymer chains, namely, high stability to denaturation and proteolysis. The polymerization conditions and conjugation proceeded with retention of the biological activity of the hormone. The rh-GH PEGMA was administered subcutaneously to rats and the activity compared to native rh-GH. The rh-GH PEGMA exhibited similar activity as the native rh-GH in vivo when a daily dose of 40 microg was administered. However, when a higher dose of 120 microg was administered with 3 days between injections the bioavailability of the rh-GH PEGMA was significantly better than that of the native. The results therefore demonstrate that ATRP can be successfully used as a general alternative approach to direct polymer conjugation, namely, PEGylation, to produce PEG-like protein conjugates. This technique can be exploited to design and synthesize protein-polymer derivatives with tailored therapeutic properties.