Structure Model of a Poly(vinyl alcohol) Film Uniaxially Stretched in Water and the Role of Crystallites on the Stress−Strain Relationship

Enhanced Dichroism of Polarizing Composite Films by Embedding Sepiolite

The present study investigated the use of fibrous nanoparticle-filled polarizing films. Sepiolites were selected as nanoparticles and incorporated into a PVA-iodine complex. The resulting nanocomposite film was elongated and dyed with iodine. Various properties of the nanocomposite polarizing films, including thermal, morphological, optical, and rheological features, were experimentally analyzed. The study demonstrated that an increase in sepiolite loading was accompanied by an enhancement in both the mechanical and viscoelastic properties. In particular, the incorporation of nanoparticles led to an increase in birefringence and the degree of polarization. This was attributed to the alteration of the internal structure of the PVA film caused by the embedded sepiolites. The thermal analysis showed that the composite film with a higher content of sepiolites exhibited higher crystallinity and a higher melting temperature.

The Addition of an Ultra-Small Amount of Black Phosphorous Quantum Dots Endow Self-Healing Polyurethane with a Biomimetic Intelligent Response

This study explores new applications of black phosphorus quantum dots (BPQDs) by adding them to self-healing material systems for the first time. Self-healing polyurethane with an ultra-small amount of BPQDs has biomimetic intelligent responsiveness and achieves balance between its mechanical and self-healing properties. By adding 0.0001 wt% BPQDs to self-healing polyurethane, the fracture strength of the material increases from 3.0 to 12.3 MPa, and the elongation at break also increases from 750% to 860%. Meanwhile, the self-healing efficiency remains at 98%. The addition of BPQDs significantly improves the deformation recovery ability of the composite materials and transforms the surface of self-healing polyurethane from hydrophilic to hydrophobic, making it suitable for applications in fields such as electronic skin and flexible wearable devices. This study provides a simple and feasible strategy for endowing self-healing materials with biomimetic intelligent responsiveness using a small amount of BPQDs.

Network structure of swollen iodine-doped poly(vinyl alcohol) amorphous domain as characterized by low field NMR

The network structure in the amorphous domain of swollen iodine-doped poly(vinyl alcohol) (PVA) was systematically investigated by low-field (LF) NMR techniques to reveal the PVA-iodine complex formation mechanism. Three PVA-iodine complexes were obtained under different iodine concentrations (c_iodine) of KI/I₂ solution: (i) c_iodine < 0.1 M: PVA-I₃^-/I₅^- complex only exists in the non-crystalline region, (ii) 0.1 M < c_iodine < 1 M: formation of PVA-I₃^- complex I, and (iii) c_iodine > 1 M: formation of PVA-I₃^- complex II. It was found that there is no intermediate-magnitude chain motion of PVA under dyeing conditions to induce the substance exchange, as evidenced by the unchanged second moment M₂ (∼1.2 × 10⁴ m s^-2) at elevated temperature (<380 K). The introduction of iodine ions can affect the chain mobility of the interphase and mobile regions. With increasing c_iodine, the chain dynamics become more restricted, as detected by the faster decay of the T₂ relaxometry results, which further accelerates the complexation process. The residual dipolar coupling strength, D_res, obtained by the more quantitative double-quantum (DQ) NMR, increases abruptly at c_iodine > 1 M. This suggests more constraints form in the amorphous network for the PVA-I₃^- complex II system. The constant defects fraction further reveals that the complexation prefers to happen along the tie chains. These results supply a possible formation pathway for the PVA-iodine complexes.

Water absorption dependence of the formation of poly(vinyl alcohol)-iodine complexes for poly(vinyl alcohol) films

Poly(vinyl alcohol) (PVA) films annealed at different temperatures are used to explore the effects of the water absorption on the formation of PVA–iodine complexes. It's found that the higher the annealing temperature, the stronger the interaction force between PVA segments, and the smaller the free volume of the PVA films. These mainly lead to the reduction of the amount of PVA segments with a moderate degree of hydration (i.e., PVA segments with moderate mobility), which are the major segments participating in the formation of PVA–iodine complexes. Therefore, PVA films with higher water absorption not only possess faster complexation speed and form more PVA–iodine complexes, but also increase the proportion of polyiodide ions with a longer length. Moreover, the complexation restricts the PVA segments with high mobility, resulting in the formation of the intermolecular ordered structure. The water absorption dependence may guide the dyeing process to obtain PVA polarizers with excellent optical performance.

Swelling process improves the mobility of PVA segments, while dyeing process restricts that. And there is a large water absorption dependence on the formation of PVA–iodine complexes.

Layered Structure in the Crystalline Adsorption Layer and the Leaching Process of Poly(vinyl alcohol) Revealed by Neutron Reflectivity

We investigated the structure of the crystalline adsorption layer of poly(vinyl alcohol) (PVA) in hot water by neutron reflectivity in two cases: when the adsorption layer is exposed on the substrate by leaching the upper bulk layer and when it is deeply embedded between a relatively thick PVA film and substrate. In both cases, the PVA adsorption layer consists of three layers on the Si substrate. The bottom layer, consisting of amorphous chains that are strongly constrained on the substrate, is not swollen even in hot water at 90 °C. The middle layer, consisting of amorphous chains that are much more mobile compared with those in the bottom layer, has no freedom to assume a crystalline form. Only the molecular chains in the top layer are crystallizable in the adsorption layer, leading to a heterogeneous layered structure in the film thickness direction. This layered structure is attributed to the crystallizable chains of PVA during the formation of the adsorption layer driven by hydrogen bonding. However, the structure and dynamics in the adsorption layer may differ in both cases because the molecular chains in the vicinity of the surface seem to be affected by surface effects even in the adsorption layer.

Strain induced crystallization of polymers at and above the crystallization temperature by coarse-grained simulations

We examine the behavior of short and long polymers by means of coarse-grained computer simulations of a by-polyvinyl alcohol inspired model. In particular, we focus on the structural changes in the monomer and polymer scales during cooling and the application of uni-axial true strain. The straining of long polymers results in the formation of a semi-crystalline system at temperatures well above the crystallization temperature, which allows for the study of strain induced crystallization.

Responsive Nanofibers with Embedded Hierarchical Lipid Self-Assemblies

We introduce the design and study of a hybrid electrospun membrane with a dedicated nanoscale structural hierarchy for controlled functions in the biomedical domain. The hybrid system comprises submicrometer-sized internally self-assembled lipid nanoparticles (ISAsomes or mesosomes) embedded into the electrospun membrane with a nanofibrous polymer network. The internal structure of ISAsomes, studied by small-angle X-ray scattering (SAXS) and electron microscopy, demonstrated a spontaneous response to variations in the environmental conditions as they undergo a bicontinuous inverse cubic phase (cubosomes) in solution to a crystalline lamellar phase in the polymer membrane; nevertheless, this phase reorganization is reversible. As revealed by in situ SAXS measurements, if the membrane was put in contact with aqueous media, the cubic phase reappeared and submicrometer-sized cubosomes were released upon dissolution of the nanofibers. Furthermore, the hybrid membranes exhibited a specific anisotropic feature and morphological response under an external strain. While nanofibers were aligned under external strain in the microscale, the semicrystalline domains from the polymer phase were positioned perpendicular to the lamellae of the lipid phase in the nanoscale. The fabricated membranes and their spontaneous responses offer new strategies for the development of structure-controlled functions in electrospun nanofibers for biomedical applications, such as drug delivery or controlled interactions with biointerfaces.

Recent advances in post-stretching processing of polymer films with in situ synchrotron radiation X-ray scattering

The stretch-induced structural evolution mechanism is a long-standing scientific question in the post-stretching processing of polymer films. X-ray scattering, especially a combination of small- and wide-angle X-ray scattering (SAXS/WAXS), provides a powerful method to study the hierarchical structure of polymer films. Recent advances in synchrotron radiation (SR) light sources and detection techniques allow one to measure the structural evolution of polymer films during post-stretching processing in real time with ultrahigh time resolution, which benefits the understanding on this topic. This review summarizes some recent investigations on post-stretching processing of polymer films, which combine in situ X-ray scattering techniques with purposely designed tensile apparatus in terms of three aspects: uniaxial stretching, biaxial stretching and stretching with chemical reactions. Concerning the polymer bulk, traditional deformation mechanisms like stretch-induced crystallization (SIC), crystal slipping, phase transition and melting-recrystallization are discussed for the uniaxial and biaxial post-stretching of polymer films. New deformation models have been developed to focus on the structural evolution on the length scale of lamellar stacks, which consider the potential microphase separation of the interlamellar amorphous phase and microbuckling. For solution systems, the coupled effects of the mechanical work from external force and the chemical potential from possible chemical reactions are taken into account for the structural evolution during stretching in solution. Roadmaps of structural and morphological evolution in the processing parameter space (i.e., temperature, stress, strain and the concentration of additive in the bath solution) are eventually constructed for precursor films. The accumulation of a structural evolution database for post-stretching processing of polymer films can be expected to provide a helpful guide for industrial processing for high-performance polymers in the near future.

Detailed Structural Study on the Poly(vinyl alcohol) Adsorption Layers on a Si Substrate with Solvent Vapor-Induced Swelling

We investigated in detail the structures in the poly(vinyl alcohol) (PVA) adsorption layers on a Si substrate, which remained on the substrate after immersing the relatively thick 30-50 nm films in hot water, by neutron reflectometry under humid conditions. For the PVA with a degree of saponification exceeding 98 mol %, the adsorption layer exhibits a three-layered structure in the thickness direction. The bottom layer is considered to be the so-called inner adsorption layer that is not fully swollen with water vapor. This may be because the polymer chains in the inner adsorption layer are strongly constrained onto the substrate, which inhibits water vapor penetration. The polymer chains in this layer have many contact points to the substrate via the hydrogen bonding between the hydroxyl groups in the polymer chain and the silanol groups on the surface of the Si substrate and consequently exhibit extremely slow dynamics. Therefore, it is inferred that the bottom layer is fully amorphous. Furthermore, we consider the middle layer to be somewhat amorphous because parts of the molecular chains are pinned below the interface between the middle and bottom layers. The molecular chains in the top layer become more mobile and ordered, owing to the large distance from the strongly constrained bottom layer; therefore, they exhibit a much lower degree of swelling compared to the middle amorphous layer. Meanwhile, for the PVA with a much lower degree of saponification, the adsorption layer structure consists of the two-layers. The bottom layer forms the inner adsorption layer that moderately swells with water vapor because the polymer chains have few contact points to the substrate. The molecular chains in the middle layer, therefore, are somewhat crystallizable because of this weak constraint.

Elucidation of a Heterogeneous Layered Structure in the Thickness Direction of Poly(vinyl alcohol) Films with Solvent Vapor-Induced Swelling

We investigated the swelling behaviors of poly(vinyl alcohol) (PVA) films deposited on Si wafers with water vapor, which is a good solvent for PVA for elucidating structural and dynamical heterogeneities in the film thickness direction. Using deuterated water vapor, structural and dynamical differences in the thickness direction can be detected easily as different degrees of swelling in the thickness direction by neutron reflectivity. Consequently, the PVA film with a degree of saponification exceeding 98 mol % exhibits a three-layered structure in the thickness direction. It is considered that an adsorption layer consisting of molecular chains that are strongly adsorbed onto the solid substrate is formed at the interface with the substrate, which is not swollen with water vapor compared with the bulk-like layer above it. The adsorption layer is considered to exhibit significantly slower dynamics than the bulk. Furthermore, a surface layer that swells excessively compared with the underneath bulk-like layer is found. This excess swelling of the surface layer may be related to a higher mobility of the molecular chains or lower crystallinity at the surface region compared to the underneath bulk-like layer. Meanwhile, for the PVA film with a much lower degree of saponification, a thin layer with a slightly lower degree of swelling than the bulk-like layer above it can be detected at the interface between the film and substrate only under a high humidity condition. This layer is considered to be the adsorption layer composed of molecular chains loosely adsorbed onto the Si substrate.

Anisotropy-Driven High Thermal Conductivity in Stretchable Poly(vinyl alcohol)/Hexagonal Boron Nitride Nanohybrid Films

Controlling the anisotropy of two-dimensional materials with orientation-dependent heat transfer characteristics is a possible solution to resolve severe thermal issues in future electronic devices. We demonstrate a dramatic enhancement in the in-plane thermal conductivity of stretchable poly(vinyl alcohol) (PVA) nanohybrid films containing small amounts (below 10 wt %) of hexagonal boron nitride ( h-BN) nanoplatelets. The h-BN nanoplatelets were homogeneously dispersed in the PVA polymer solution by ultrasonication without additional surface modification. The mixture was used to prepare thermally conductive nanocomposite films. The in-plane thermal conductivity of the resulting PVA/ h-BN nanocomposite films increased to 6.4 W/mK when the strain was increased from 0 to 100% in the horizontal direction. More specifically, the thermal conductivity of a PVA/ h-BN composite film with 10 wt % filler loading can be improved by up to 32 times as compared to pristine PVA. This outstanding thermal conductivity value is significantly larger than that of materials currently used in in-plane thermal management systems. This result is attributed to the anisotropic alignment of h-BN particles in the PVA chain matrix during stretching, enhancing phonon conductive paths and hence improving the thermal conductivity and thermal properties of PVA/ h-BN nanocomposite films. These polymer nanocomposites have low cost as the amount of expensive conductive fillers is reduced and can be potentially used as high-performance materials for thermal management systems such as heat sink and thermal interface materials, for future electronic and electrical devices.

Deformation-induced structure evolution of poly(butylene terephthalate)/poly(carbonate) blends during uniaxial stretching

Phase separation occurs during deformation for all the PBT/PC samples. At large strains, microfibril slippage plays a leading role in the macroscopic strain.

System forin situobservation of three-dimensional structural changes in polymer films during uniaxial deformation

A simple three-dimensional structural evaluation system for a film during uniaxial deformation has been developed. The system is realized with an automatic film stretching machine, which allows the horizontally symmetric stretching of a film, and a synchrotron radiation X-ray scattering apparatus. Using this system, two-dimensional patterns of small-angle X-ray scattering and wide-angle X-ray diffraction can be obtained simultaneously during film stretching in the so-called edge and end views, together with stress–strain data. As cylindrical symmetry of the structure can be expected for a uniaxially stretched film, the two-dimensional patterns in the through view are identical to those in the edge view, indicating that three-dimensional structural characterization can be performed with a combination of edge and end views during film stretching. For amorphous poly(ethylene terephthalate) and crystalline poly(vinyl alcohol) films, the preliminary results of three-dimensional structural characterization during film stretching are shown.